A connector add-on that declares files.transfer no longer carries file
bytes in the connector envelope. The host puts a random handle in the
request of the op media (write) or send_file (read), and the add-on
streams the file with two new host operations, connector.file.put and
connector.file.get, in chunks of at most 256 KiB.
The process that runs the add-on registers the handle when the call
arrives and ends it when the call returns. A handle is bound to the
add-on, so another add-on gets the same answer as for an unknown
handle. An unfinished inbound file is dropped with its partial bytes,
and a handle with no call for two minutes expires. Inbound bytes go
to the blob store of the workspace, outbound bytes come from it, so a
cluster needs the shared object store and no shared disk. The file is
never held in memory. The host overwrites the size and hash of an
inbound file with its own record.
The change is additive: the field files.transfer needs manifest API 2,
a kind without it keeps the inline path and its 1 MiB cap, and the host
never sends it a handle. A call that carries a handle may run up to 15
minutes. The ceiling of a file also stays under the largest file of a
workspace.
Assisted-by: Claude:claude-sonnet-5-5 go test
The grants of an agent were stored and listed, but only the proposal kinds
read them. The connector gate now reads them too, so a tool exists when
the sender holds the capability on the binding, the agent holds the grant
and the chat did not switch the tool off.
It covers triggers.propose, triggers.run, talkback.channels,
talkback.new_channel and files.upload. Every question that goes through
the gate asks the grants: the capabilities of a turn, the check of a
feature that has a sender, and a run without a sender, so a trigger that
fires from a message pauses when the grant goes.
An agent with no grant list keeps the capabilities that are not
sensitive, as before. A sensitive one (talkback.new_channel) needs the
explicit grant. Once any grant is on the list, the list is the whole
answer. The act.* grants are not enforced: the action policy of unattended
runs that uses them does not exist yet.
Assisted-by: Claude:claude-sonnet-5-5 go test
A write tool of an add-on that holds a credential was protected only by
the write mode of the connection and the confirmation of the proposal.
In a connector chat it now also needs the capability tools.write for the
sender of the turn, through the same Authorize path as the other
capabilities: the tool is not offered without it, a call is checked again
and every decision is audited. The default is no.
The rule is by shape, not by name. The manifest says an add-on holds a
credential, and contract.ToolPermission maps its non-read tools to
tools.write. The chat reads the permission from the tool definition, so
the core names no add-on.
Also close a hole in local-owner mode, where a chat turn and the browser
share one credential: a proposal that waits for a person could be
confirmed from a chat turn. The call of a chat tool now carries a mark,
and the owner refuses to confirm such a proposal under it. A remote owner
does not see the mark; local-owner mode has no remote owner.
Assisted-by: Claude:claude-sonnet-5-5 go test
One manifest-driven guard replaces the Go-only provider guard. It reads
addons/*/manifest.json and fails when the Go strings of core and pkg,
the React UI source, the locale files or the core docs hold the id of an
add-on with a role (as a whole string or a tool-name prefix) or one of
its declared titles as a whole word.
Third-party mentions (OAuth login, release sources, token formats) and
ordinary words sit in a commented allow-list. The special cases that
remain (propose_change memory kind, the Account memory tab, the Telegram
conversion, the Tables listing shim) sit in knownDebt, each with the item
that removes it, and a ceiling that only goes down.
Reword the sandbox sentences in the container docs and use neutral
sample names in the UI catalog page.
Assisted-by: Claude:claude-sonnet-5-5 go test
The provider guard flags any core string that contains the name of a
shipped add-on that provides a generic role. The web add-on has the id
and title "Web", so the built-in tools group titled "Web" in the tools
picker (and the schema example for it) failed the guard on master.
Rename the group title to "Look things up online", which matches its
"cannot look anything up online" off-state text. Update the schema
example and the Playwright fixtures and specs that read the title.
Assisted-by: Claude:claude-sonnet-5-5 go test eslint
"Do it in 10 minutes" and "at 18:00" now work from a connector chat. The
agent proposes a timer with when {"in": ...} or {"at": ...}; it runs
the model once, reports to the chat it was set in, and is removed, also
when the run failed. A timer is at least one minute and at most a year
away. Recurring triggers keep their one-hour floor. Every proposal and
confirmation text states the cost: one model run.
A proposal is answered with a plain word in the same thread: yes, ok,
no, cancel. The code stays as a fallback when several proposals wait.
Only the whole message of an allowed sender counts, and only when the
capability gate allows it, so nothing the agent read can approve.
The approval setting of a binding now takes effect. In auto mode the
trigger is made at once and the chat is told how to cancel it; in
auto_readonly mode that holds only for a proposal that says its runs
only read. The owner's limits bound it, and a proposal over a limit is
asked instead, with the reason. Recurring triggers made this way end
after the lifetime.
Assisted-by: Claude:claude-sonnet-5-5 go
A connector binding gets an approval setting: ask, auto or auto_readonly,
with four limits for the two automatic modes (live triggers, minutes
between runs of a recurring trigger, runs a day, lifetime in days). The
setting is generic, so every connector add-on can show it, and the
shared connector page of the add-ons now draws it. A binding that sets
nothing asks, as before.
This change stores, validates and exposes the setting. The next change
acts on it.
Assisted-by: Claude:claude-sonnet-5-5 go swag node
A saved agent now has a Builtins list: the capabilities its owner gave
it (memory.write, profile.write, skills.write, pages.write,
dashboard.write, triggers.propose, triggers.run, talkback.channels,
talkback.new_channel, files.upload, act.files, act.addons, act.send,
act.spend and the opt-in group saved_agents). The list is empty by
default, and nothing turns a grant on for a template, an import or a
write that omits the field.
A chat of the agent holds the grants the user may use at the turn
(agent scope). A tool exists when the grant is held, the chat did not
switch its group off and the run can hold rights: a sub-agent or a run
that started by itself never does. propose_change and revert_change
now exist only for a chat that holds the grant of at least one kind,
and the schema lists only those kinds.
propose_change gains the kinds skill, page and dashboard. A skill is a
SKILL.md for the personal or the agent layer, and a skill with
locked: true is refused, also as a shadow of a locked personal skill.
A page is a set of files checked against the Pages rules and written
as one change set. The dashboard is a home.json checked against its
schema. All three are re-checked when the owner confirms or edits.
GET /api/chats/agents/builtin-grants lists each grant with its title,
description and sensitive flag. The agent record, the write body and
the export file carry builtins; an old file imports as before and an
unknown name is dropped in an import and refused in a write.
Assisted-by: Claude:claude-sonnet-5-5 go gofmt swag
A connection now has a write mode, chosen on the add-on page: off (the
default), propose (each change waits for the person to confirm) or auto
(a chat of the person makes it at once). The host enforces it for every
write tool of an add-on that holds a credential, before the add-on is
called, and holds the call to the repository list of the connection.
Host:
- Binding.WriteMode, stored in both stores and in the connector API
(write_mode). Absent means off, so existing bindings stay read only.
- A credentialed add-on may declare write tools. They name the resource
with the credential slot argument, never resourceId. A tool can set
approval "always", a ceiling that keeps a proposal even in auto.
- The proposal broker fetches the credential for the preview and again
for the apply, so it is never stored. A mode lowered between the
proposal and the confirmation refuses the apply. A proposal that
awaits a person cannot be confirmed by a chat turn.
- New capability name tools.write for the roles a connector kind
declares.
Add-on, tools (kind write): comment-issue, comment-pr, create-issue,
edit-issue (title, close or reopen), add-labels, review-comment-pr.
They preview plain facts, refuse a stale target, cap and screen the
text for secrets, and keep a receipt journal plus a hidden marker in the
text, so a change whose answer was lost is not sent twice.
Assisted-by: Claude:claude-sonnet-5-5 go gofmt ginkgo node
The registry spec knew every built-in tool by name. send_message is
governed by the capability of the binding and the operator switch, so it
has no group and no setting.
Assisted-by: Claude:claude-sonnet-5-5 go
The four document skill names were code in the contract, the hint for
binary files kept its own list of formats and libraries, and the chat
boundary rewrote the old arguments of one add-on by its ID.
A skill that shadows a name can now declare the slot it serves: kind,
file extensions, name words and a library hint. A tool can declare
legacyArgs, the arguments it refuses now, each with a hint. Both need
manifest api 2. The four default slots move to a data file that the
contract reads, so a manifest that declares nothing keeps working.
The host takes the replaceable names, the files a skill covers and the
hint for a script from the skills the add-ons list. It compares no
format or add-on ID. A guard spec fails when it does again. The Office
manifest declares its slots and legacy arguments and accepts api 2.
Assisted-by: Claude:claude-sonnet-5-5 go gofmt
A connector chat whose sender holds talkback.channels gets the tool
send_message. It writes in the conversation, or as a new top-level
message in a channel that the owner listed on the binding (id, label,
approved; at most 10). The tool names no platform.
An unlisted channel is refused and the error lists the ones that are.
A listed channel that the owner did not approve needs the sensitive
talkback.new_channel for each message, so only a paired sender can use
it. The agent cannot add or approve a channel, so text it read in a page
or a file cannot widen where it writes.
Messages go through the outbox (rate limit and queue), with the size cap
and the mention breaking. Each attempt adds an audit row with channel,
kind, capability, length and a hash, never the text.
A trigger can report to an approved channel with delivery target
channel. The binding, the capability and the listing are checked again
when the run ends; any failure sends the notice to the Inbox.
LOCALAI_DISABLE_CONNECTOR_TALKBACK turns both off.
Assisted-by: Claude:claude-sonnet-5-5 go swag
The previous commit was made on a stale base and so reverted work that
landed on master before it. This commit puts every file back to the
state of its parent's parent. The permission enforcement of the
previous commit stays.
Assisted-by: Claude:claude-sonnet-5-5 go
The capabilities, role grants and pairing that a connector binding
stores now decide what a sender can make the agent do.
Authorize is one pure function: the capability must be in the owner's
ceiling for the binding and the sender must be on the allowlist. A
sensitive capability then needs a paired sender; roles never count for
it. Any other capability needs a pairing or a role that the owner
granted and that the kind lists. The default is no.
Each message gets a grant for its sender. A message that joins a
running turn narrows it to what both senders may do. The tool builder
offers a gated tool only for a held capability, and the tool checks
again when the model calls it, so a call that gets through is refused
with the reason. Today this covers propose_change (memory and profile
kinds), revert_change, the trigger tools, and files sent to the bot. A
chat worker gets the grant with the start request.
The capability gate that the trigger features ask is now answered by
Authorize, and the application sets it. Other features can add a
global switch with AddCapabilitySwitch.
Every use records an allow or deny row (time, binding, sender IDs,
roles, capability, result; no text or codes). GET
/api/chats/connectors/{id}/access returns the effective permissions
per kind of sender and the latest rows, for an add-on settings page.
A binding saved before this change has no capabilities, so its senders
lose these features until the owner enables them.
Assisted-by: Claude:claude-sonnet-5-5 go swag
The Tools menu of a chat listed a ninth built-in group, "changes", by its
raw ID with no text, and only some rows said what a switch did. The
registry now carries a title, a description of what the model can do when
the group is on, and what happens when it is off, for every group. Groups
that nobody described fall back to the label and description of their
first tool, so a new tool group needs no change in the interface.
An add-on row can show the title and description its manifest declares:
the broker may implement the optional AddonLister, and the lists carry
both fields next to the ID.
A saved agent gets builtins_off and builtins_on. builtins_off is a
ceiling: a chat of the agent shows the group off with a reason and cannot
switch it on, and a sub-agent follows it. builtins_on lists the opt-in
groups the agent's chats start with. Both are additive columns, a write
that does not name them keeps the stored ones, and groups the server does
not offer are dropped so an imported file still loads. An agent with
switches exports as version 3, so an older server refuses the file
instead of giving the agent every tool; a single-folder agent without
switches still exports as version 2.
Assisted-by: Claude:claude-sonnet-5-5 go gofmt swag
The host reads the declared capabilities of the installed generation to
decide whether a tool call needs a credential. Copy the new field, and
teach two guard tests that GitHub the service is not the add-on.
Assisted-by: Claude:claude-sonnet-5-5 [go]
Add a manifest credentials declaration, host-enforced per-binding
resource lists, Request.Credential and ResourceKey set by the host, and
a typed ErrRateLimited that reaches the model as rate_limited.
Assisted-by: Claude:claude-sonnet-5-5 [go]
POST and PUT on /api/chats/agents take folders, a list of path and mode
rows, up to eight. The old folder field still works and is read as a
list with one entry. Responses carry folders, the effective mode of each
row and a notice with the count of shared folders a chat does not mount.
A folder inside another folder of the same agent takes the mode of the
outer one, because the file store gives a node the highest mode among
the roots above it and cannot hold a read only folder inside a write
folder. The editor data shows that mode.
An agent with one folder still exports as version 2. An agent with
several exports as version 3 with folders. A server that reads version 2
refuses version 3. Import keeps a folder that is not found as a row
that is not chosen.
Assisted-by: Claude:claude-sonnet-5-5 go gofmt
The fence of a chat now holds every folder of the agent in one layer.
Where a folder is inside another one of the same agent, the outer mode
caps the inner one, and a shared folder is read only. A missing or
unchosen row stops the chat and the error names the row; it never
falls back to the whole home.
The fence budget no longer refuses a chat. Skill layers and the agent
folders are always kept, a shared folder inside a root already in the
layer is skipped, and the rest are kept by node ID until the layer is
full. Trigger tools, trigger runs, sub-agent checks and the agent list
take the whole list. Save and import take a list of folder rows.
Assisted-by: Claude:claude-sonnet-5-5 go gofmt
A view can now mount further folders next to the first one, at
folder-<name> with a numeric suffix when two names collide. The store
still caps each mount by the fence. A fenced view counts the shared
folders it leaves out, and the prompt says how many are not mounted.
Assisted-by: Claude:claude-sonnet-5-5 go gofmt
An agent may now have up to eight folders, each with its own mode. The
list is stored in a new table for GORM and in a folders field for the
JSON store. The old single-folder pair stays and mirrors the first entry
for one release, so a rollback keeps working. At start the GORM store
copies a single folder into the list; the copy is safe to repeat.
Assisted-by: Claude:claude-sonnet-5-5 go gofmt
A chat that does not exist yet has no execution status to read, so its
isolation is unknown by construction. Three places treated that as a
failure:
- Switching an add-on in a draft reset the commands state and never
refilled it, so the "isolation is unknown" notice stayed. The draft
now keeps the state its list gave it.
- The skills list of a draft hid the document skills of the selected
commands provider, because they need isolated commands. A draft list
now offers them; the turn of the real chat still gates them on the
status it reads. The draft add-on switch also reads the skills again.
- The shell row of the Tools menu printed the generic unknown text for
the draft state. It now says nothing about isolation there.
In a real chat, switching an add-on or a tool group now reads the
chat's network view again, so the network controls appear once the
provider serves commands.
Assisted-by: Claude:claude-sonnet-5-5 go gofmt playwright
A connector chat can now propose a trigger, the person answers it in the
chat, and the run reports to the chat.
The trigger tools propose_trigger and list_triggers are offered in a
connector chat when a capability gate allows triggers.propose for the
binding. The gate is a small interface on the service with a deny-all
default, so nothing changes until the application sets one. Change and
delete stay in Studio.
A proposal from a chat stores the binding, chat and thread, a four
character code and a 24 hour expiry. The host writes the proposal and the
code in that chat. "confirm CODE" or "cancel CODE", as a whole message in
the same chat and thread, is handled before any model turn and needs
proposals.confirm. A binding may make 3 proposals an hour. Proposals that
lapse are marked expired, and the proposal card shows that state.
A trigger carries a delivery: the Inbox (default) or the chat of the
proposal, with the modes always, on_change and on_problem. The host writes
the last message of the run, cut and with broadcast mentions broken; a
message of exactly [SILENT] writes nothing; three failures in a row raise
one alert per 6 hours. A failed delivery falls back to the Inbox. Host
messages of a binding go through an outbox of 20 a minute that queues the
rest. While triggers.run is off, runs of such a trigger are skipped, not
replayed, and the record is unchanged. The audit records each step with a
hash and no text.
Assisted-by: Claude:claude-sonnet-5-5 go test ginkgo eslint
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
The tool that reads the details of a context file topic was called
memory_read. The loader is generic: any component or add-on that declares
a context file uses it, and nothing in it knows which one. Rename the tool
to context_read so the host does not name a feature of one add-on.
Behaviour and limits stay the same.
Assisted-by: Claude:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
A turn now asks the add-on broker which running add-ons declare context
files, and loads their index files with the loader that already reads
registered sources. The same rules as for add-on skills apply: a stopped
add-on, one the chat switched off, one the chat's agent does not grant,
and one that cannot work for the user bring nothing. memory_read serves
the topics of those sources. The Memory page lists the files of any
installed add-on, running or not, because the files belong to the person.
The channel notes folder of a chat is now the one propose_change writes
for the same conversation: the binding and a hash of the chat. A note the
person confirmed is read back by the conversation that proposed it. Before,
the loader built the folder from the binding alone, so the two never met.
The prompt names the save tool only in a chat that has it, so a chat that
switched propose_change off is not told to call it.
Assisted-by: Claude:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
A connector kind can now declare the roles it gives to a sender and the
capabilities it can grant to a role. The owner of a binding enables a
ceiling of capabilities and maps roles to them. The host stores these
values and returns them with the binding and the kind list, so an add-on
settings page can show them.
Capability names are a closed list owned by the host. Sensitive names
may be listed by a kind but are never granted to a role; only a paired
sender can use them.
Pairing proves that the owner controls a platform account. The owner
asks for a one-use code (valid ten minutes) and sends it as a direct
message to the bot from an allowlisted account. The host checks the code
before any model turn and never logs it. A binding holds three paired
senders, a pairing ends after 90 days, and five wrong codes in an hour
lock the sender out for an hour.
Contract: connector kinds gain optional roles and permissions, and a
message gains optional roles. They need manifest api 2, which the host
already accepts; protocol is unchanged and manifests that declare
nothing new behave as before. The host drops roles a kind does not
declare.
Enforcement of the capabilities by feature is not part of this change.
Assisted-by: Claude:claude-sonnet-5-5 go swag
A connector chat kept the model its agent had when the chat was made, so
changing the agent's model did not reach senders with an existing chat.
Move the kept chat to the agent's current model when a message arrives.
A turn that failed because the tool definitions or the conversation did
not fit the context window showed only the generic error sentence. Name
the cause and the sizes, and give the same sentence in the web chat and
in the bots. A refused tool definition now has its own code.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
The thread_context binding setting is removed. When the kind declares
the history ability and the bot is mentioned in a thread, the host
reads the thread once for a new chat, as before. The other guards stay:
the ability check, the bound, the untrusted block, and a failure never
blocks the answer.
A binding stored by an earlier build still loads. The JSON store
ignores the unknown field. The GORM row no longer maps the
thread_context_off column; AutoMigrate does not drop it and it accepts
NULL, so reads and writes keep working. No data is migrated or removed.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
The Settings page states the ceiling in effect from this field.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
The connector list shows, for each binding and each kind, the limit in
effect in both directions, the layer that sets it, the ability the kind
declares and the most an owner may set. A binding accepts
file_receive_max_bytes and file_send_max_bytes; a value above the limit
of the kind is a 400.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
The limit of a file is the smallest of the host ceiling, the ability the
connector kind declares, the owner's setting for the binding and the cap
of the inline path. One function decides it and names the layer that
won. The sentences to the sender and to the model are built from that
number and layer, in KiB or MiB, instead of a fixed 1 MB. A guard spec
fails when these files carry a size or a byte count of their own.
The owner can lower the limit of a binding; a value above the limit of
the kind is refused.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
A binding keeps an optional limit for the files it reads and the files it
sends. Zero means the owner sets none. Both stores keep the values and the
validation bounds them.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
GET /api/chats takes an optional origin parameter: person (chats a
person started), automated (every other chat) or one origin kind such as
trigger or connector. The limit counts the chats kept, so a flood of
chats that a connector or a trigger started cannot push the chats of a
person off a page, and the other way round. Without the parameter the
list is unchanged.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
A chat that is not created yet has no add-on bound to it, so its
execution status cannot be read. The host now says so with the reason
draft, and the Home composer shows no commands warning for it.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
A harness may call a tool with a context that carries nothing of the
turn. Lend the values of the turn to the tool, so a status read in the
tool shares the turn's observation instead of starting without one.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
load_skill runs with the context the harness gives it, which has no
execution scope, so the status of the commands read as not selected and
the document skills were dropped. Make the descriptor and skill
resolution open a scope when the context has none, and report a scope-less
status read as a programming error: logged once in production, a failure
of the spec in tests.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
The spec builds the turn tools under the product scope and then calls
load_skill with a context of its own, as the harness does. It fails
with the not_selected text on master.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
The option followThreads says which threads the bot follows without a new
mention: own (default) follows the threads that a top-level mention
started, any also follows a thread that other people started once the bot
is mentioned in it, never needs a mention each time. A mention inside a
thread that people started is answered and, in own mode, not followed.
The followed threads are kept in the add-on's data directory, written
atomically, and expire after a day without a message, so a restart or a
reconnect does not make the bot forget them.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
A kind can declare options with a few values and a default (manifest
api 2). The host checks the owner's choice against the declaration,
stores it on the binding, shows it in the REST API and sends the value in
effect with every poll. The add-on decides what the option means.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
When a message in a thread makes a new chat, the host asks the add-on of
a kind that declares history for the earlier messages, once, and hands
them to the first turn as a delimited block of untrusted content. The
block is bounded in messages and bytes, keeps the newest, is flattened
and escaped, and is not kept in the transcript. A failure or a missing
ability leaves the turn as it was.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
A binding reads the earlier messages of a thread by default. The new
thread_context option turns that off, and the kind list says which kinds
can give a thread's messages. It is stored like send_files: the zero
value keeps the default.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
Fail when a file that builds the text of the command network, the
built-in bash or the host-exec setting writes the name of an add-on.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
The chat's network view, the administrator view and the line the model
reads about the network of its commands now take their name from the
capabilities.network an add-on declares, or from the title of its
commands tool when it declares none. The sentences no longer say
"Sandbox" or "the sandbox". The API gains a network object with the
title and the preset titles next to the existing addon field.
The text of the built-in bash and of the host-exec setting names an
add-on that provides bash instead of one add-on.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
Read addons/*/manifest.json at run time and find the add-ons that shadow a
built-in tool or skill, serve as a connector or declare the execution
provider. One spec scans the string literals of core and pkg for their
names; another builds the command prompts and the network text for every
state and checks that none names a shipped provider. A short allow-list
holds the strings that name a platform or a token format as content.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
The prompt, the Tools menu reasons, the network error texts, the CLI help,
the API instructions and the assistant tool descriptions said "Sandbox" for
the add-on that runs commands. Core must not know that name.
The reason a chat has no commands now uses the title the provider declares
("the Zeta add-on is off for this chat") or, when none is installed, says
"the add-on that runs commands". Text that has no provider in hand speaks of
the network of commands or of an add-on that isolates them.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
Union of both case lists in the add-on suite inventory; the swagger
files are regenerated from the merged code.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
Document the optional body of the confirm route, the context-files route,
the card the thread draws for any kind and source, and the Memory tab. The
context-file listing is a person's own action, so the actor scan allows it.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
The Sandbox add-on states in its manifest that its bash tool runs
commands, under which title, with which note for the model, and that it
supplies the runtime of the document skills. The manifest accepts API 1
to 2. A spec checks that the manifest matches the descriptor in code.
A guard spec fails when the studio package or the add-on tool adapter
compares a string with the ID of the Sandbox again, or when the files
that build the commands text name it.
The contracts suite inventory lists the new specs, and two specs of the
network-policy status that it was missing.
Assisted-by: Claude Code:claude-sonnet-5-5
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
Ettore Di Giacinto