* feat(face-recognition): add insightface backend for 1:1 verify, 1:N identify, embedding, detection, analysis
Adds face recognition as a new first-class capability in LocalAI via the
`insightface` Python backend, with a pluggable two-engine design so
non-commercial (insightface model packs) and commercial-safe
(OpenCV Zoo YuNet + SFace) models share the same gRPC/HTTP surface.
New gRPC RPCs (backend/backend.proto):
* FaceVerify(FaceVerifyRequest) returns FaceVerifyResponse
* FaceAnalyze(FaceAnalyzeRequest) returns FaceAnalyzeResponse
Existing Embedding and Detect RPCs are reused (face image in
PredictOptions.Images / DetectOptions.src) for face embedding and
face detection respectively.
New HTTP endpoints under /v1/face/:
* verify — 1:1 image pair same-person decision
* analyze — per-face age + gender (emotion/race reserved)
* register — 1:N enrollment; stores embedding in vector store
* identify — 1:N recognition; detect → embed → StoresFind
* forget — remove a registered face by opaque ID
Service layer (core/services/facerecognition/) introduces a
`Registry` interface with one in-memory `storeRegistry` impl backed
by LocalAI's existing local-store gRPC vector backend. HTTP handlers
depend on the interface, not on StoresSet/StoresFind directly, so a
persistent PostgreSQL/pgvector implementation can be slotted in via a
single constructor change in core/application (TODO marker in the
package doc).
New usecase flag FLAG_FACE_RECOGNITION; insightface is also wired
into FLAG_DETECTION so /v1/detection works for face bounding boxes.
Gallery (backend/index.yaml) ships three entries:
* insightface-buffalo-l — SCRFD-10GF + ArcFace R50 + genderage
(~326MB pre-baked; non-commercial research use only)
* insightface-opencv — YuNet + SFace (~40MB pre-baked; Apache 2.0)
* insightface-buffalo-s — SCRFD-500MF + MBF (runtime download; non-commercial)
Python backend (backend/python/insightface/):
* engines.py — FaceEngine protocol with InsightFaceEngine and
OnnxDirectEngine; resolves model paths relative to the backend
directory so the same gallery config works in docker-scratch and
in the e2e-backends rootfs-extraction harness.
* backend.py — gRPC servicer implementing Health, LoadModel, Status,
Embedding, Detect, FaceVerify, FaceAnalyze.
* install.sh — pre-bakes buffalo_l + OpenCV YuNet/SFace inside the
backend directory so first-run is offline-clean (the final scratch
image only preserves files under /<backend>/).
* test.py — parametrized unit tests over both engines.
Tests:
* Registry unit tests (go test -race ./core/services/facerecognition/...)
— in-memory fake grpc.Backend, table-driven, covers register/
identify/forget/error paths + concurrent access.
* tests/e2e-backends/backend_test.go extended with face caps
(face_detect, face_embed, face_verify, face_analyze); relative
ordering + configurable verifyCeiling per engine.
* Makefile targets: test-extra-backend-insightface-buffalo-l,
-opencv, and the -all aggregate.
* CI: .github/workflows/test-extra.yml gains tests-insightface-grpc,
auto-triggered by changes under backend/python/insightface/.
Docs:
* docs/content/features/face-recognition.md — feature page with
license table, quickstart (defaults to the commercial-safe model),
models matrix, API reference, 1:N workflow, storage caveats.
* Cross-refs in object-detection.md, stores.md, embeddings.md, and
whats-new.md.
* Contributor README at backend/python/insightface/README.md.
Verified end-to-end:
* buffalo_l: 6/6 specs (health, load, face_detect, face_embed,
face_verify, face_analyze).
* opencv: 5/5 specs (same minus face_analyze — SFace has no
demographic head; correctly skipped via BACKEND_TEST_CAPS).
Assisted-by: Claude:claude-opus-4-7
* fix(face-recognition): move engine selection to model gallery, collapse backend entries
The previous commit put engine/model_pack options on backend gallery
entries (`backend/index.yaml`). That was wrong — `GalleryBackend`
(core/gallery/backend_types.go:32) has no `options` field, so the
YAML decoder silently dropped those keys and all three "different
insightface-*" backend entries resolved to the same container image
with no distinguishing configuration.
Correct split:
* `backend/index.yaml` now has ONE `insightface` backend entry
shipping the CPU + CUDA 12 container images. The Python backend
bundles both the non-commercial insightface model packs
(buffalo_l / buffalo_s) and the commercial-safe OpenCV Zoo
weights (YuNet + SFace); the active engine is selected at
LoadModel time via `options: ["engine:..."]`.
* `gallery/index.yaml` gains three model entries —
`insightface-buffalo-l`, `insightface-opencv`,
`insightface-buffalo-s` — each setting the appropriate
`overrides.backend` + `overrides.options` so installing one
actually gives the user the intended engine. This matches how
`rfdetr-base` lives in the model gallery against the `rfdetr`
backend.
The earlier e2e tests passed despite this bug because the Makefile
targets pass `BACKEND_TEST_OPTIONS` directly to LoadModel via gRPC,
bypassing any gallery resolution entirely. No code changes needed.
Assisted-by: Claude:claude-opus-4-7
* feat(face-recognition): cover all supported models in the gallery + drop weight baking
Follows up on the model-gallery split: adds entries for every model
configuration either engine actually supports, and switches weight
delivery from image-baked to LocalAI's standard gallery mechanism.
Gallery now has seven `insightface-*` model entries (gallery/index.yaml):
insightface (family) — non-commercial research use
• buffalo-l (326MB) — SCRFD-10GF + ResNet50 + genderage, default
• buffalo-m (313MB) — SCRFD-2.5GF + ResNet50 + genderage
• buffalo-s (159MB) — SCRFD-500MF + MBF + genderage
• buffalo-sc (16MB) — SCRFD-500MF + MBF, recognition only
(no landmarks, no demographics — analyze
returns empty attributes)
• antelopev2 (407MB) — SCRFD-10GF + ResNet100@Glint360K + genderage
OpenCV Zoo family — Apache 2.0 commercial-safe
• opencv — YuNet + SFace fp32 (~40MB)
• opencv-int8 — YuNet + SFace int8 (~12MB, ~3x smaller, faster on CPU)
Model weights are no longer baked into the backend image. The image
now ships only the Python runtime + libraries (~275MB content size,
~1.18GB disk vs ~1.21GB when weights were baked). Weights flow through
LocalAI's gallery mechanism:
* OpenCV variants list `files:` with ONNX URIs + SHA-256, so
`local-ai models install insightface-opencv` pulls them into the
models directory exactly like any other gallery-managed model.
* insightface packs (upstream distributes .zip archives only, not
individual ONNX files) auto-download on first LoadModel via
FaceAnalysis' built-in machinery, rooted at the LocalAI models
directory so they live alongside everything else — same pattern
`rfdetr` uses with `inference.get_model()`.
Backend changes (backend/python/insightface/):
* backend.py — LoadModel propagates `ModelOptions.ModelPath` (the
LocalAI models directory) to engines via a `_model_dir` hint.
This replaces the earlier ModelFile-dirname approach; ModelPath
is the canonical "models directory" variable set by the Go loader
(pkg/model/initializers.go:144) and is always populated.
* engines.py::_resolve_model_path — picks up `model_dir` and searches
it (plus basename-in-model-dir) before falling back to the dev
script-dir. This is how OnnxDirectEngine finds gallery-downloaded
YuNet/SFace files by filename only.
* engines.py::_flatten_insightface_pack — new helper that works
around an upstream packaging inconsistency: buffalo_l/s/sc zips
expand flat, but buffalo_m and antelopev2 zips wrap their ONNX
files in a redundant `<name>/` directory. insightface's own
loader looks one level too shallow and fails. We call
`ensure_available()` explicitly, flatten if nested, then hand to
FaceAnalysis.
* engines.py::InsightFaceEngine.prepare — root-resolution order now
includes the `_model_dir` hint so packs download into the LocalAI
models directory by default.
* install.sh — no longer pre-downloads any weights. Everything is
gallery-managed now.
* smoke.py (new) — parametrized smoke test that iterates over every
gallery configuration, simulating the LocalAI install flow
(creates a models dir, fetches OpenCV files with checksum
verification, lets insightface auto-download its packs), then
runs detect + embed + verify (+ analyze where supported) through
the in-process BackendServicer.
* test.py — OnnxDirectEngineTest no longer hardcodes `/models/opencv/`
paths; downloads ONNX files to a temp dir at setUpClass time and
passes ModelPath accordingly.
Registry change (core/services/facerecognition/store_registry.go):
* `dim=0` in NewStoreRegistry now means "accept whatever dimension
arrives" — needed because the backend supports 512-d ArcFace/MBF
and 128-d SFace via the same Registry. A non-zero dim still fails
fast with ErrDimensionMismatch.
* core/application plumbs `faceEmbeddingDim = 0`, explaining the
rationale in the comment.
Backend gallery description updated to reflect that the image carries
no weights — it's just Python + engines.
Smoke-tested all 7 configurations against the rebuilt image (with the
flatten fix applied), exit 0:
PASS: insightface-buffalo-l faces=6 dim=512 same-dist=0.000
PASS: insightface-buffalo-sc faces=6 dim=512 same-dist=0.000
PASS: insightface-buffalo-s faces=6 dim=512 same-dist=0.000
PASS: insightface-buffalo-m faces=6 dim=512 same-dist=0.000
PASS: insightface-antelopev2 faces=6 dim=512 same-dist=0.000
PASS: insightface-opencv faces=6 dim=128 same-dist=0.000
PASS: insightface-opencv-int8 faces=6 dim=128 same-dist=0.000
7/7 passed
Assisted-by: Claude:claude-opus-4-7
* fix(face-recognition): pre-fetch OpenCV ONNX for e2e target; drop stale pre-baked claim
CI regression from the previous commit: I moved OpenCV Zoo weight
delivery to LocalAI's gallery `files:` mechanism, but the
test-extra-backend-insightface-opencv target was still passing
relative paths `detector_onnx:models/opencv/yunet.onnx` in
BACKEND_TEST_OPTIONS. The e2e suite drives LoadModel directly over
gRPC without going through the gallery, so those relative paths
resolved to nothing and OpenCV's ONNXImporter failed:
LoadModel failed: Failed to load face engine:
OpenCV(4.13.0) ... Can't read ONNX file: models/opencv/yunet.onnx
Fix: add an `insightface-opencv-models` prerequisite target that
fetches the two ONNX files (YuNet + SFace) to a deterministic host
cache at /tmp/localai-insightface-opencv-cache/, verifies SHA-256,
and skips the download on re-runs. The opencv test target depends on
it and passes absolute paths in BACKEND_TEST_OPTIONS, so the backend
finds the files via its normal absolute-path resolution branch.
Also refresh the buffalo_l comment: it no longer says "pre-baked"
(nothing is — the pack auto-downloads from upstream's GitHub release
on first LoadModel, same as in CI).
Locally verified: `make test-extra-backend-insightface-opencv` passes
5/5 specs (health, load, face_detect, face_embed, face_verify).
Assisted-by: Claude:claude-opus-4-7
* feat(face-recognition): add POST /v1/face/embed + correct /v1/embeddings docs
The docs promised that /v1/embeddings returns face vectors when you
send an image data-URI. That was never true: /v1/embeddings is
OpenAI-compatible and text-only by contract — its handler goes
through `core/backend/embeddings.go::ModelEmbedding`, which sets
`predictOptions.Embeddings = s` (a string of TEXT to embed) and never
populates `predictOptions.Images[]`. The Python backend's Embedding
gRPC method does handle Images[] (that's how /v1/face/register reaches
it internally via `backend.FaceEmbed`), but the HTTP embeddings
endpoint wasn't wired to populate it.
Rather than overload /v1/embeddings with image-vs-text detection —
messy, and the endpoint is OpenAI-compatible by design — add a
dedicated /v1/face/embed endpoint that wraps `backend.FaceEmbed`
(already used internally by /v1/face/register and /v1/face/identify).
Matches LocalAI's convention of a dedicated path per non-standard flow
(/v1/rerank, /v1/detection, /v1/face/verify etc.).
Response:
{
"embedding": [<dim> floats, L2-normed],
"dim": int, // 512 for ArcFace R50 / MBF, 128 for SFace
"model": "<name>"
}
Live-tested on the opencv engine: returns a 128-d L2-normalized vector
(sum(x^2) = 1.0000). Sentinel in docs updated to note /v1/embeddings
is text-only and point image users at /v1/face/embed instead.
Assisted-by: Claude:claude-opus-4-7
* fix(http): map malformed image input + gRPC status codes to proper 4xx
Image-input failures on LocalAI's single-image endpoints (/v1/detection,
/v1/face/{verify,analyze,embed,register,identify}) have historically
returned 500 — even when the client was the one who sent garbage.
Classic example: you POST an "image" that isn't a URL, isn't a
data-URI, and isn't a valid JPEG/PNG — the server shouldn't claim
that's its fault.
Two helpers land in core/http/endpoints/localai/images.go and every
single-image handler is switched over:
* decodeImageInput(s)
Wraps utils.GetContentURIAsBase64 and turns any failure
(invalid URL, not a data-URI, download error, etc.) into
echo.NewHTTPError(400, "invalid image input: ...").
* mapBackendError(err)
Inspects the gRPC status on a backend call error and maps:
INVALID_ARGUMENT → 400 Bad Request
NOT_FOUND → 404 Not Found
FAILED_PRECONDITION → 412 Precondition Failed
Unimplemented → 501 Not Implemented
All other codes fall through unchanged (still 500).
Before, my 1×1 PNG error-path test returned:
HTTP 500 "rpc error: code = InvalidArgument desc = failed to decode one or both images"
After:
HTTP 400 "failed to decode one or both images"
Scope-limited to the LocalAI single-image endpoints. The multi-modal
paths (middleware/request.go, openresponses/responses.go,
openai/realtime.go) intentionally log-and-skip individual media parts
when decoding fails — different design intent (graceful degradation
of a multi-part message), not a 400-worthy failure. Left untouched.
Live-verified: every error case in /tmp/face_errors.py now returns
4xx with a meaningful message; the "image with no face (1x1 PNG)"
case specifically went from 500 → 400.
Assisted-by: Claude:claude-opus-4-7
* refactor(face-recognition): insightface packs go through gallery files:, drop FaceAnalysis
Follows up on the discovery that LocalAI's gallery `files:` mechanism
handles archives (zip, tar.gz, …) via mholt/archiver/v3 — the rhasspy
piper voices use exactly this pattern. Insightface packs are zip
archives, so we can now deliver them the same way every other
gallery-managed model gets delivered: declaratively, checksum-verified,
through LocalAI's standard download+extract pipeline.
Two changes:
1. Gallery (gallery/index.yaml) — every insightface-* entry gains a
`files:` list with the pack zip's URI + SHA-256. `local-ai models
install insightface-buffalo-l` now fetches the zip, verifies the
hash, and extracts it into the models directory. No more reliance
on insightface's library-internal `ensure_available()` auto-download
or its hardcoded `BASE_REPO_URL`.
2. InsightFaceEngine (backend/python/insightface/engines.py) — drops
the FaceAnalysis wrapper and drives insightface's `model_zoo`
directly. The ~50 lines FaceAnalysis provides — glob ONNX files,
route each through `model_zoo.get_model()`, build a
`{taskname: model}` dict, loop per-face at inference — are
reimplemented in `InsightFaceEngine`. The actual inference classes
(RetinaFace, ArcFaceONNX, Attribute, Landmark) are still
insightface's — we only replicate the glue, so drift risk against
upstream is minimal.
Why drop FaceAnalysis: it hard-codes a `<root>/models/<name>/*.onnx`
layout that doesn't match what LocalAI's zip extraction produces.
LocalAI unpacks archives flat into `<models_dir>`. Upstream packs
are inconsistent — buffalo_l/s/sc ship ONNX at the zip root (lands
at `<models_dir>/*.onnx`), buffalo_m/antelopev2 wrap in a redundant
`<name>/` dir (lands at `<models_dir>/<name>/*.onnx`). The new
`_locate_insightface_pack` helper searches both locations plus
legacy paths and returns whichever has ONNX files. Replaces the
earlier `_flatten_insightface_pack` helper (which tried to fight
FaceAnalysis's layout expectations; now we just find the files
wherever they are).
Net effect for users: install once via LocalAI's managed flow,
weights live alongside every other model, progress shows in the
jobs endpoint, no first-load network call. Same API surface,
cleaner plumbing.
Assisted-by: Claude:claude-opus-4-7
* fix(face-recognition): CI's insightface e2e path needs the pack pre-fetched
The e2e suite drives LoadModel over gRPC without going through LocalAI's
gallery flow, so the engine's `_model_dir` option (normally populated
from ModelPath) is empty. Previously the insightface target relied on
FaceAnalysis auto-download to paper over this, but we dropped
FaceAnalysis in favor of direct model_zoo calls — so the buffalo_l
target started failing at LoadModel with "no insightface pack found".
Mirror the opencv target's pre-fetch pattern: download buffalo_sc.zip
(same SHA as the gallery entry), extract it on the host, and pass
`root:<dir>` so the engine locates the pack without needing
ModelPath. Switched to buffalo_sc (smallest pack, ~16MB) to keep CI
fast; it covers the same insightface engine code path as buffalo_l.
Face analyze cap dropped since buffalo_sc has no age/gender head.
Assisted-by: Claude:claude-opus-4-7[1m]
* feat(face-recognition): surface face-recognition in advertised feature maps
The six /v1/face/* endpoints were missing from every place LocalAI
advertises its feature surface to clients:
* api_instructions — the machine-readable capability index at
GET /api/instructions. Added `face-recognition` as a dedicated
instruction area with an intro that calls out the in-memory
registry caveat and the /v1/face/embed vs /v1/embeddings split.
* auth/permissions — added FeatureFaceRecognition constant, routed
all six face endpoints through it so admins can gate them per-user
like any other API feature. Default ON (matches the other API
features).
* React UI capabilities — CAP_FACE_RECOGNITION symbol mapped to
FLAG_FACE_RECOGNITION. Declared only for now; the Face page is a
follow-up (noted in the plan).
Instruction count bumped 9 → 10; test updated.
Assisted-by: Claude:claude-opus-4-7[1m]
* docs(agents): capture advertising-surface steps in the endpoint guide
Before this change, adding a new /v1/* endpoint reliably missed one or
more of: the swagger @Tags annotation, the /api/instructions registry,
the auth RouteFeatureRegistry, and the React UI CAP_* symbol. The
endpoint would work but be invisible to API consumers, admins, and the
UI — and nothing in the existing docs said to look in those places.
Extend .agents/api-endpoints-and-auth.md with a new "Advertising
surfaces" section covering all four surfaces (swagger tags, /api/
instructions, capabilities.js, docs/), and expand the closing checklist
so it's impossible to ship a feature without visiting each one. Hoist a
one-liner reminder into AGENTS.md's Quick Reference so agents skim it
before diving in.
Assisted-by: Claude:claude-opus-4-7[1m]
* fix(distributed): detect backend upgrades across worker nodes
Before this change `DistributedBackendManager.CheckUpgrades` delegated to the
local manager, which read backends from the frontend filesystem. In
distributed deployments the frontend has no backends installed locally —
they live on workers — so the upgrade-detection loop never ran and the UI
silently never surfaced upgrades even when the gallery advertised newer
versions or digests.
Worker-side: NATS backend.list reply now carries Version, URI and Digest
for each installed backend (read from metadata.json).
Frontend-side: DistributedBackendManager.ListBackends aggregates per-node
refs (name, status, version, digest) instead of deduping, and CheckUpgrades
feeds that aggregation into gallery.CheckUpgradesAgainst — a new entrypoint
factored out of CheckBackendUpgrades so both paths share the same core
logic.
Cluster drift policy: when per-node version/digest tuples disagree, the
backend is flagged upgradeable regardless of whether any single node
matches the gallery, and UpgradeInfo.NodeDrift enumerates the outliers so
operators can see *why* it is out of sync. The next upgrade-all realigns
the cluster.
Tests cover: drift detection, unanimous-match (no upgrade), and the
empty-installed-version path that the old distributed code silently
missed.
* feat(ui): surface backend upgrades in the System page
The System page (Manage.jsx) only showed updates as a tiny inline arrow,
so operators routinely missed them. Port the Backend Gallery's upgrade UX
so System speaks the same visual language:
- Yellow banner at the top of the Backends tab when upgrades are pending,
with an "Upgrade all" button (serial fan-out, matches the gallery) and a
"Updates only" filter toggle.
- Warning pill (↑ N) next to the tab label so the count is glanceable even
when the banner is scrolled out of view.
- Per-row labeled "Upgrade to vX.Y" button (replaces the icon-only button
that silently flipped semantics between Reinstall and Upgrade), plus an
"Update available" badge in the new Version column.
- New columns: Version (with upgrade + drift chips), Nodes (per-node
attribution badges for distributed mode, degrading to a compact
"on N nodes · M offline" chip above three nodes), Installed (relative
time).
- System backends render a "Protected" chip instead of a bare "—" so rows
still align and the reason is obvious.
- Delete uses the softer btn-danger-ghost so rows don't scream red; the
ConfirmDialog still owns the "are you sure".
The upgrade checker also needed the same per-worker fix as the previous
commit: NewUpgradeChecker now takes a BackendManager getter so its
periodic runs call the distributed CheckUpgrades (which asks workers)
instead of the empty frontend filesystem. Without this the /api/backends/
upgrades endpoint stayed empty in distributed mode even with the protocol
change in place.
New CSS primitives — .upgrade-banner, .tab-pill, .badge-row, .cell-stack,
.cell-mono, .cell-muted, .row-actions, .btn-danger-ghost — all live in
App.css so other pages can adopt them without duplicating styles.
* feat(ui): polish the Nodes page so it reads like a product
The Nodes page was the biggest visual liability in distributed mode.
Rework the main dashboard surfaces in place without changing behavior:
StatCards: uniform height (96px min), left accent bar colored by the
metric's semantic (success/warning/error/primary), icon lives in a
36x36 soft-tinted chip top-right, value is left-aligned and large.
Grid auto-fills so the row doesn't collapse on narrow viewports. This
replaces the previous thin-bordered boxes with inconsistent heights.
Table rows: expandable rows now show a chevron cue on the left (rotates
on expand) so users know rows open. Status cell became a dedicated chip
with an LED-style halo dot instead of a bare bullet. Action buttons gained
labels — "Approve", "Resume", "Drain" — so the icons aren't doing all
the semantic work; the destructive remove action uses the softer
btn-danger-ghost variant so rows don't scream red, with the ConfirmDialog
still owning the real "are you sure". Applied cell-mono/cell-muted
utility classes so label chips and addresses share one spacing/font
grammar instead of re-declaring inline styles everywhere.
Expanded drawer: empty states for Loaded Models and Installed Backends
now render as a proper drawer-empty card (dashed border, icon, one-line
hint) instead of a plain muted string that read like broken formatting.
Tabs: three inline-styled buttons became the shared .tab class so they
inherit focus ring, hover state, and the rest of the design system —
matches the System page.
"Add more workers" toggle turned into a .nodes-add-worker dashed-border
button labelled "Register a new worker" (action voice) instead of a
chevron + muted link that operators kept mistaking for broken text.
New shared CSS primitives carry over to other pages:
.stat-grid + .stat-card, .row-chevron, .node-status, .drawer-empty,
.nodes-add-worker.
* feat(distributed): durable backend fan-out + state reconciliation
Two connected problems handled together:
1) Backend delete/install/upgrade used to silently skip non-healthy nodes,
so a delete during an outage left a zombie on the offline node once it
returned. The fan-out now records intent in a new pending_backend_ops
table before attempting the NATS round-trip. Currently-healthy nodes
get an immediate attempt; everyone else is queued. Unique index on
(node_id, backend, op) means reissuing the same operation refreshes
next_retry_at instead of stacking duplicates.
2) Loaded-model state could drift from reality: a worker OOM'd, got
killed, or restarted a backend process would leave a node_models row
claiming the model was still loaded, feeding ghost entries into the
/api/nodes/models listing and the router's scheduling decisions.
The existing ReplicaReconciler gains two new passes that run under a
fresh KeyStateReconciler advisory lock (non-blocking, so one wedged
frontend doesn't freeze the cluster):
- drainPendingBackendOps: retries queued ops whose next_retry_at has
passed on currently-healthy nodes. Success deletes the row; failure
bumps attempts and pushes next_retry_at out with exponential backoff
(30s → 15m cap). ErrNoResponders also marks the node unhealthy.
- probeLoadedModels: gRPC-HealthChecks addresses the DB thinks are
loaded but hasn't seen touched in the last probeStaleAfter (2m).
Unreachable addresses are removed from the registry. A pluggable
ModelProber lets tests substitute a fake without standing up gRPC.
DistributedBackendManager exposes DeleteBackendDetailed so the HTTP
handler can surface per-node outcomes ("2 succeeded, 1 queued") to the
UI in a follow-up commit; the existing DeleteBackend still returns
error-only for callers that don't care about node breakdown.
Multi-frontend safety: the state pass uses advisorylock.TryWithLockCtx
on a new key so N frontends coordinate — the same pattern the health
monitor and replica reconciler already rely on. Single-node mode runs
both passes inline (adapter is nil, state drain is a no-op).
Tests cover the upsert semantics, backoff math, the probe removing an
unreachable model but keeping a reachable one, and filtering by
probeStaleAfter.
* feat(ui): show cluster distribution of models in the System page
When a frontend restarted in distributed mode, models that workers had
already loaded weren't visible until the operator clicked into each node
manually — the /api/models/capabilities endpoint only knew about
configs on the frontend's filesystem, not the registry-backed truth.
/api/models/capabilities now joins in ListAllLoadedModels() when the
registry is active, returning loaded_on[] with node id/name/state/status
for each model. Models that live in the registry but lack a local config
(the actual ghosts, not recovered from the frontend's file cache) still
surface with source="registry-only" so operators can see and persist
them; without that emission they'd be invisible to this frontend.
Manage → Models replaces the old Running/Idle pill with a distribution
cell that lists the first three nodes the model is loaded on as chips
colored by state (green loaded, blue loading, amber anything else). On
wider clusters the remaining count collapses into a +N chip with a
title-attribute breakdown. Disabled / single-node behavior unchanged.
Adopted models get an extra "Adopted" ghost-icon chip with hover copy
explaining what it means and how to make it permanent.
Distributed mode also enables a 10s auto-refresh and a "Last synced Xs
ago" indicator next to the Update button so ghost rows drop off within
one reconcile tick after their owning process dies. Non-distributed
mode is untouched — no polling, no cell-stack, same old Running/Idle.
* feat(ui): NodeDistributionChip — shared per-node attribution component
Large clusters were going to break the Manage → Backends Nodes column:
the old inline logic rendered every node as a badge and would shred the
layout at >10 workers, plus the Manage → Models distribution cell had
copy-pasted its own slightly-different version.
NodeDistributionChip handles any cluster size with two render modes:
- small (≤3 nodes): inline chips of node names, colored by health.
- large: a single "on N nodes · M offline · K drift" summary chip;
clicking opens a Popover with a per-node table (name, status,
version, digest for backends; name, status, state for models).
Drift counting mirrors the backend's summarizeNodeDrift so the UI
number matches UpgradeInfo.NodeDrift. Digests are truncated to the
docker-style 12-char form with the full value preserved in the title.
Popover is a new general-purpose primitive: fixed positioning anchored
to the trigger, flips above when there's no room below, closes on
outside-click or Escape, returns focus to the trigger. Uses .card as
its surface so theming is inherited. Also useful for a future
labels-editor popup and the user menu.
Manage.jsx drops its duplicated inline Nodes-column + loaded_on cell
and uses the shared chip with context="backends" / "models"
respectively. Delete code removes ~40 lines of ad-hoc logic.
* feat(ui): shared FilterBar across the System page tabs
The Backends gallery had a nice search + chip + toggle strip; the System
page had nothing, so the two surfaces felt like different apps. Lift the
pattern into a reusable FilterBar and wire both System tabs through it.
New component core/http/react-ui/src/components/FilterBar.jsx renders a
search input, a role="tablist" chip row (aria-selected for a11y), and
optional toggles / right slot. Chips support an optional `count` which
the System page uses to show "User 3", "Updates 1" etc.
System Models tab: search by id or backend; chips for
All/Running/Idle/Disabled/Pinned plus a conditional Distributed chip in
distributed mode. "Last synced" + Update button live in the right slot.
System Backends tab: search by name/alias/meta-backend-for; chips for
All/User/System/Meta plus conditional Updates / Offline-nodes chips
when relevant. The old ad-hoc "Updates only" toggle from the upgrade
banner folded into the Updates chip — one source of truth for that
filter. Offline chip only appears in distributed mode when at least
one backend has an unhealthy node, so the chip row stays quiet on
healthy clusters.
Filter state persists in URL query params (mq/mf/bq/bf) so deep links
and tab switches keep the operator's filter context instead of
resetting every time.
Also adds an "Adopted" distribution path: when a model in
/api/models/capabilities carries source="registry-only" (discovered on
a worker but not configured locally), the Models tab shows a ghost chip
labelled "Adopted" with hover copy explaining how to persist it — this
is what closes the loop on the ghost-model story end-to-end.
* feat: add PreferDevelopmentBackends setting, expose isMeta/isDevelopment in API
- Add PreferDevelopmentBackends config field, CLI flag, runtime setting
- Add IsDevelopment() method to GalleryBackend
- Use AvailableBackendsUnfiltered in UI API to show all backends
- Expose isMeta, isDevelopment, preferDevelopmentBackends in backend API response
* feat: upgrade banner with Upgrade All button, detect pre-existing backends
- Add upgrade banner on Backends page showing count and Upgrade All button
- Fix upgrade detection for backends installed before version tracking:
flag as upgradeable when gallery has a version but installed has none
- Fix OCI digest check to flag backends with no stored digest as upgradeable
* feat: add backend versioning data model foundation
Add Version, URI, and Digest fields to BackendMetadata for tracking
installed backend versions and enabling upgrade detection. Add Version
field to GalleryBackend. Add UpgradeAvailable/AvailableVersion fields
to SystemBackend. Implement GetImageDigest() for lightweight OCI digest
lookups via remote.Head. Record version, URI, and digest at install time
in InstallBackend() and propagate version through meta backends.
* feat: add backend upgrade detection and execution logic
Add CheckBackendUpgrades() to compare installed backend versions/digests
against gallery entries, and UpgradeBackend() to perform atomic upgrades
with backup-based rollback on failure. Includes Agent A's data model
changes (Version/URI/Digest fields, GetImageDigest).
* feat: add AutoUpgradeBackends config and runtime settings
Add configuration and runtime settings for backend auto-upgrade:
- RuntimeSettings field for dynamic config via API/JSON
- ApplicationConfig field, option func, and roundtrip conversion
- CLI flag with LOCALAI_AUTO_UPGRADE_BACKENDS env var
- Config file watcher support for runtime_settings.json
- Tests for ToRuntimeSettings, ApplyRuntimeSettings, and roundtrip
* feat(ui): add backend version display and upgrade support
- Add upgrade check/trigger API endpoints to config and api module
- Backends page: version badge, upgrade indicator, upgrade button
- Manage page: version in metadata, context-aware upgrade/reinstall button
- Settings page: auto-upgrade backends toggle
* feat: add upgrade checker service, API endpoints, and CLI command
- UpgradeChecker background service: checks every 6h, auto-upgrades when enabled
- API endpoints: GET /backends/upgrades, POST /backends/upgrades/check, POST /backends/upgrade/:name
- CLI: `localai backends upgrade` command, version display in `backends list`
- BackendManager interface: add UpgradeBackend and CheckUpgrades methods
- Wire upgrade op through GalleryService backend handler
- Distributed mode: fan-out upgrade to worker nodes via NATS
* fix: use advisory lock for upgrade checker in distributed mode
In distributed mode with multiple frontend instances, use PostgreSQL
advisory lock (KeyBackendUpgradeCheck) so only one instance runs
periodic upgrade checks and auto-upgrades. Prevents duplicate
upgrade operations across replicas.
Standalone mode is unchanged (simple ticker loop).
* test: add e2e tests for backend upgrade API
- Test GET /api/backends/upgrades returns 200 (even with no upgrade checker)
- Test POST /api/backends/upgrade/:name accepts request and returns job ID
- Test full upgrade flow: trigger upgrade via API, wait for job completion,
verify run.sh updated to v2 and metadata.json has version 2.0.0
- Test POST /api/backends/upgrades/check returns 200
- Fix nil check for applicationInstance in upgrade API routes
* always enable parallel requests
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat: add node reconciler, allow to schedule to group of nodes, min/max autoscaler
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore: move tests to ginkgo
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore(smart router): order by available vram
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat: add distributed mode (experimental)
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix data races, mutexes, transactions
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* refactorings
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fixups
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix events and tool stream in agent chat
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* use ginkgo
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* refactoring and consolidation
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* refactoring and consolidation
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* refactoring and consolidation
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* refactoring and consolidation
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* refactoring and consolidation
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* refactoring and consolidation
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* refactoring and consolidation
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* refactoring and consolidation
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix(cron): compute correctly time boundaries avoiding re-triggering
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* enhancements, refactorings
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* do not flood of healthy checks
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* do not list obvious backends as text backends
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* tests fixups
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* refactoring and consolidation
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Drop redundant healthcheck
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* enhancements, refactorings
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
Tracing settings (EnableTracing and TracingMaxItems) were not being
loaded from runtime_settings.json on startup, causing tracing settings
configured via WebUI to be lost after service restart.
This fix adds proper loading of tracing settings in
loadRuntimeSettingsFromFile function in core/application/startup.go.
Fixes#9072
Co-authored-by: localai-bot <localai-bot@localai.io>
* feat(ui): add users and authentication support
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat: allow the admin user to impersonificate users
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore: ui improvements, disable 'Users' button in navbar when no auth is configured
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat: add OIDC support
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix: gate models
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore: cache requests to optimize speed
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* small UI enhancements
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore(ui): style improvements
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix: cover other paths by auth
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore: separate local auth, refactor
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* security hardening, approval mode
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix: fix tests and expectations
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore: update localagi/localrecall
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat(gallery): Switch to expandable box instead of pop-over and display model files
Signed-off-by: Richard Palethorpe <io@richiejp.com>
* feat(ui, backends): Add individual backend logging
Signed-off-by: Richard Palethorpe <io@richiejp.com>
* fix(ui): Set the context settings from the model config
Signed-off-by: Richard Palethorpe <io@richiejp.com>
---------
Signed-off-by: Richard Palethorpe <io@richiejp.com>
Otherwise if using collections with postgresql we create a deadlock, as
we need embeddings to be up
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat(mlx-distributed): add new MLX-distributed backend
Add new MLX distributed backend with support for both TCP and RDMA for
model sharding.
This implementation ties in the discovery implementation already in
place, and re-uses the same P2P mechanism for the TCP MLX-distributed
inferencing.
The Auto-parallel implementation is inspired by Exo's
ones (who have been added to acknowledgement for the great work!)
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* expose a CLI to facilitate backend starting
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat: make manual rank0 configurable via model configs
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Add missing features from mlx backend
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Apply suggestion from @mudler
Signed-off-by: Ettore Di Giacinto <mudler@users.noreply.github.com>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
Signed-off-by: Ettore Di Giacinto <mudler@users.noreply.github.com>
feat: add --data-path CLI flag for persistent data separation
- Add LOCALAI_DATA_PATH environment variable and --data-path CLI flag
- Default data path: /data (separate from configuration directory)
- Automatic migration on startup: moves agent_tasks.json, agent_jobs.json, collections/, and assets/ from old config dir to new data path
- Backward compatible: preserves old behavior if LOCALAI_DATA_PATH is not set
- Agent state and job directories now use DataPath with proper fallback chain
- Update documentation with new flag and docker-compose example
This separates mutable persistent data (collectiondb, agents, assets, skills) from configuration files, enabling better volume mounting and data persistence in containerized deployments.
Signed-off-by: localai-bot <localai-bot@noreply.github.com>
Co-authored-by: localai-bot <localai-bot@noreply.github.com>
* feat: add standalone and agentic functionalities
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* expose agents via responses api
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix: ensure proper watchdog shutdown and state passing between restarts
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix: add missing watchdog settings
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix: untrack model if we shut it down successfully
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat: allow to set forcing backends eviction while requests are in flight
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat: try to make the request sit and retry if eviction couldn't be done
Otherwise calls that in order to pass would need to shutdown other
backends would just fail.
In this way instead we make the request sit and retry eviction until it
succeeds. The thresholds can be configured by the user.
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* add tests
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* expose settings to CLI
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Update docs
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix: default to 10seconds of watchdog if runtime setting is malformed
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix: use gosigar for RAM estimation
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat: allow to install backends from URL in the WebUI and API
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* tests
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* trace backends installations
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat(loader): refactor single active backend support to LRU
This changeset introduces LRU management of loaded backends. Users can
set now a maximum number of models to be loaded concurrently, and, when
setting LocalAI in single active backend mode we set LRU to 1 for
backward compatibility.
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore: add tests
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Update docs
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Fixups
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat(agent): agent jobs
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Multiple webhooks, simplify
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Do not use cron with seconds
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Create separate pages for details
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Detect if no models have MCP configuration, show wizard
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Make services test to run
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat(ui): add watchdog settings
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Do not re-read env
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Some refactor, move other settings to runtime (p2p)
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Add API Keys handling
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Allow to disable runtime settings
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Documentation
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Small fixups
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* show MCP toggle in index
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Drop context default
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat(ui): allow to cancel ops
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Improve progress text
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Cancel queued ops, don't show up message cancellation always
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix: fixup displaying of total progress over multiple files
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat: initial hook to install elements directly
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* WIP: ui changes
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Move HF api client to pkg
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Add simple importer for gguf files
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Add opcache
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* wire importers to CLI
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Add omitempty to config fields
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Fix tests
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Add MLX importer
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Small refactors to star to use HF for discovery
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Add tests
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Common preferences
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Add support to bare HF repos
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat(importer/llama.cpp): add support for mmproj files
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* add mmproj quants to common preferences
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Fix vlm usage in tokenizer mode with llama.cpp
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat(p2p): sync models between federated nodes
This change makes sure that between federated nodes all the models are
synced with each other.
Note: this works exclusively with models belonging to a gallery. It does
not sync files between the nodes, but rather it synces the node setup.
E.g. All the nodes needs to have configured the same galleries and
install models without any local editing.
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Make nodes stable
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Fixups on syncing
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* ui: improve p2p view
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
- Add a system backend path
- Refactor and consolidate system information in system state
- Use system state in all the components to figure out the system paths
to used whenever needed
- Refactor BackendConfig -> ModelConfig. This was otherway misleading as
now we do have a backend configuration which is not the model config.
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* migrate core/system to pkg/system - it has no dependencies FROM core, and IS USED in pkg
Signed-off-by: Dave Lee <dave@gray101.com>
* move pkg/templates up to core/templates -- nothing in pkg references it, but it does reference core.
Signed-off-by: Dave Lee <dave@gray101.com>
* remove extra check, len of nil is 0
Signed-off-by: Dave Lee <dave@gray101.com>
* move pkg/startup to core/startup -- it does have important and unfixable dependencies on core
Signed-off-by: Dave Lee <dave@gray101.com>
---------
Signed-off-by: Dave Lee <dave@gray101.com>
* feat: split remaining backends and drop embedded backends
- Drop silero-vad, huggingface, and stores backend from embedded
binaries
- Refactor Makefile and Dockerfile to avoid building grpc backends
- Drop golang code that was used to embed backends
- Simplify building by using goreleaser
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore(gallery): be specific with llama-cpp backend templates
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore(docs): update
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore(ci): minor fixes
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore: drop all ffmpeg references
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix: run protogen-go
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Always enable p2p mode
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Update gorelease file
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix(stores): do not always load
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Fix linting issues
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Simplify
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Mac OS fixup
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat: Add backend gallery
This PR add support to manage backends as similar to models. There is
now available a backend gallery which can be used to install and remove
extra backends.
The backend gallery can be configured similarly as a model gallery, and
API calls allows to install and remove new backends in runtime, and as
well during the startup phase of LocalAI.
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Add backends docs
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* wip: Backend Dockerfile for python backends
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* feat: drop extras images, build python backends separately
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fixup on all backends
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* test CI
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Tweaks
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Drop old backends leftovers
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Fixup CI
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Move dockerfile upper
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Fix proto
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Feature dropped for consistency - we prefer model galleries
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Add missing packages in the build image
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* exllama is ponly available on cublas
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* pin torch on chatterbox
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Fixups to index
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* CI
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Debug CI
* Install accellerators deps
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Add target arch
* Add cuda minor version
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Use self-hosted runners
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* ci: use quay for test images
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fixups for vllm and chatterbox
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Small fixups on CI
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chatterbox is only available for nvidia
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Simplify CI builds
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Adapt test, use qwen3
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* chore(model gallery): add jina-reranker-v1-tiny-en-gguf
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* fix(gguf-parser): recover from potential panics that can happen while reading ggufs with gguf-parser
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Use reranker from llama.cpp in AIO images
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Limit concurrent jobs
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
Signed-off-by: Ettore Di Giacinto <mudler@users.noreply.github.com>
Since the remote gallery was introduced this is now completely
superseded by it. In order to keep the code clean and remove redudant
parts let's simplify the usage.
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Read jinja templates as fallback
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Move templating out of model loader
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Test TemplateMessages
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Set role and content from transformers
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Tests: be more flexible
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* More jinja
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
* Small refactoring and adaptations
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
---------
Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
