4 Commits

Include renames

Author	SHA1	Message	Date
localai-org-maint-botandEttore Di Giacinto	9afe10ba21	fix(distributed): survive a slow control-plane database (#11837) ... * fix(distributed): evict only when a node is known to be full scheduleNewModel asked the registry for a free replica slot and treated every error as "this node is full", so a control-plane database slow enough to time out the lookup evicted a healthy loaded model. The evicted process died, a peer frontend still holding its address dialled the dead port and retried, and the model thrashed between nodes. The comment on the branch already said it meant a full node; the code never tested for it. Evict only on ErrNoFreeSlot. Any other error now returns and names the lookup that failed, so a slow database degrades into a diagnosable load failure instead of into lost work. An audit of the rest of the router found one branch of the same shape: node selection discarded the error from its last-resort finder, so a database timeout there also produced a nil node and evicted for it. That path now returns unless the finder said gorm.ErrRecordNotFound, which is the only answer that means the cluster had no node to give. No other destructive branch in router.go fires on a generic error. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(distributed): checkpoint heartbeat writes instead of writing every beat Every heartbeat UPDATEd backend_nodes. Six nodes at a ten second beat is roughly 52,000 writes a day against a six-row table, and that churn is what turned a blocked autovacuum into a 460 MB table whose six-row scan cost 867 ms and timed out the queries that place models. A beat carrying only a fresher timestamp now waits for the checkpoint interval. Each reported field is compared against the value last persisted rather than tested for presence, because a worker sends its disk figures on every beat and presence alone would suppress nothing. A node's first beat, a changed total VRAM, total disk or GPU vendor, and a free VRAM, RAM or disk reading that has moved more than 256 MiB from the persisted value all still write at once. A node that is not active is never suppressed, because it recovers only when the health monitor sees a fresh timestamp. The persisted column is up to one interval stale by design, so the stale-node threshold moves from 60s to 5m to cover it. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(distributed): fail worker readiness when a held backend is unreachable The readiness gate tracked only the NATS link, so a worker whose backend processes had died still answered /readyz with 200 and kept receiving loads. One node did exactly that during an incident: it reported healthy while its backend port refused connections, and every load routed to it failed. Readiness is now the NATS link and, for each backend process the worker believes it is running, a short dial of its recorded address. A worker holding no backends stays ready, because idle is a healthy state. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(distributed): keep a starting backend out of the readiness dial set A backend process is inserted into the supervisor map with its gRPC address already recorded, but the address refuses connections until the gRPC server binds, which the startup poll allows up to 30 seconds for and which takes 10 to 15 seconds on a slow node. The new data-path readiness probe dialled that address straight away, so a worker answered /readyz with 503 for the whole of every cold backend start. The container HEALTHCHECK absorbs that, but a Kubernetes readinessProbe at 10s does not, and the worker would leave rotation each time it loaded a model. The skip for a stopping process had no counterpart at the other end of the lifecycle. Backend processes now carry a serving flag, set where the startup health-check gate succeeds, and the probe dials only processes that are serving and not yet stopping. backendStartStillValid becomes markBackendServing: the check and the mark must share one lock hold, so the flag can only ever land on the entry the key currently owns. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(distributed): export control-plane database health gauges Four transactions wedged on a corrupt index held the vacuum horizon open for 42 days. Nothing measured it, so the first symptom anyone saw was models failing to load six weeks later, by which time a six-row table had grown to 460 MB. Export the oldest xmin age, the longest open transaction, and the dead tuple ratio on the registry tables. The first is the number that would have caught it: it sits near zero in health and was 21,002,291. Sampling is scrape-driven behind a cache, and a failed sample reports the last good values rather than failing the scrape, because these gauges matter most when the database is already struggling. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(distributed): rate-limit failed control-plane database samples The cache advanced its clock only on a successful sample, so once the database started failing every scrape retried the query immediately. That turned the cache off in the one regime it exists for: a retry storm at scrape cadence aimed at a database already in trouble. A catalog read that consistently exceeds the 5 second timeout also paid that cost on every scrape, with all scrapes serialised behind the sampler mutex. Time every attempt rather than every success, so failures and timeouts cost the same interval as good samples. Whether a good sample exists moves to its own field, keeping the gauges absent until the first success and holding the last good values through later failures. Also note in the runbook that pg_stat_activity cannot see prepared transactions or replication slot xmins, so a healthy-looking xmin age does not by itself rule out a blocked horizon. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(distributed): pin that a failing database evicts nothing Exercises the real distributed stack against a control-plane database that refuses the router's slot lookup, and asserts the scheduler reports the lookup it could not answer instead of falling through to eviction. The failure is injected with privileges rather than a statement timeout. A timeout set with ALTER DATABASE also breaks AutoMigrate, and it leaks into every later spec in the suite unless it is reset, so the spec would end up testing the migration rather than the scheduler. Instead the spec creates a dedicated login role, points a second gorm handle at it, and revokes that role's SELECT on node_models.replica_index. This has to be a separate role: the test container's owner is a PostgreSQL superuser, and superusers bypass every privilege check, so revoking from CURRENT_USER is recorded and then ignored. The revoke is scoped to one column on purpose. Revoking the whole table would also blind node selection, which runs first and has a guard of its own, so the scheduler would never reach the slot lookup this spec is about. Leaving every other column readable lets selection succeed and lands the refusal exactly on NextFreeReplicaIndex, which plucks replica_index. The grant is restored from BeforeEach via DeferCleanup, so a failing assertion or a panic cannot hand the next spec a role that cannot read. Reverting the eviction guard fails this spec, which is the point of it: the router then reports "no replica slot on keeper and eviction failed" for an error that was never evidence the node was full. The surviving-row assertions are secondary under this injection, because the eviction path reads whole node_models rows and the same revoke blinds it too; a comment in the spec says so, so nobody mistakes them for the load-bearing ones. Also documents why the vector store and the control plane must not share a database: the removable-tuple cutoff is per database, not per table, so one transaction left open anywhere stops autovacuum reclaiming the node registry, and a six-row table bloats into hundreds of megabytes. The note names LOCALAI_AUTH_DATABASE_URL and LOCALAI_AGENT_POOL_DATABASE_URL as the two knobs that must differ, and the localai_control_plane_oldest_xmin_age gauge as the way to see it coming. grep for StaleNodeThreshold and HealthCheckInterval in core/config/runtime_settings_registry.go returns no matches: the distributed duration knobs are not exposed as runtime settings, so the new heartbeat checkpoint interval follows them and needs no registry entry. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(distributed): close the review gaps in the heartbeat and health path The stale-node threshold moved from 60 seconds to 5 minutes in this branch because checkpointing makes last_heartbeat up to one checkpoint interval behind by design. Two things were left inconsistent with that. NewHealthMonitor still fell back to a hardcoded 60 seconds when handed a zero threshold, so any future caller that stopped passing the configured value would mark every healthy, beating node offline on every cycle. And the threshold itself had a flag-name constant but no AppOption, no CLI field and no env binding, so an operator who widened --node-heartbeat-checkpoint had no way to widen the threshold to match. The fallback now tracks config.DefaultStaleNodeThreshold, and --stale-node-threshold / LOCALAI_STALE_NODE_THRESHOLD is wired the same way its sibling is. Heartbeat suppression compared the RAW reported free VRAM against the snapshot, but the column persists capAvailable(raw, ceiling). On any node with a VRAM budget set, whose actual free VRAM oscillates above that ceiling, every beat looked material while the persisted value never moved: suppression was defeated on exactly the nodes an operator had configured, and the write amplification this branch exists to remove came straight back there. The comparison and the snapshot now both hold the capped figure, so they measure the same quantity as the column. Fixing that needs the ceiling, and reading it cost a SELECT on every beat, including suppressed ones. The skip decision therefore moved ahead of the updates map and now reuses the ceiling cached on the last durable write, while the write path still re-reads it before capping anything. A ceiling that changed inside the checkpoint window can cost one extra or one late write; it cannot persist a wrong figure. A suppressed beat now costs no query at all. Also: the operations section now says to grant pg_read_all_stats to the LocalAI role, because PostgreSQL blanks backend_xmin and xact_start for sessions owned by other roles, and the transaction that wedged the horizon in the incident was a co-located vector store connecting as a different role, so without the grant the new gauge sees only our own sessions. The compose healthcheck comment now describes readiness covering the backend data path, and the control-plane gauge registration records the otel.SetMeterProvider ordering it depends on. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(distributed): resolve the gauge's table names through gorm The dead-tuple gauge queried pg_stat_user_tables against a hardcoded list of three table names. Those three do not agree on where their name comes from: BackendNode and NodeModel take gorm's default pluralisation, while GalleryOperationRecord overrides TableName, and gallery_operations already had a constant of its own that the list duplicated. A literal list keeps compiling after any of that moves, and the query then matches nothing. The failure is silent and it points the wrong way: a dead-tuple ratio that matched no rows reports the same numbers as a cluster with no bloat, so the gauge would look healthiest exactly when it had stopped working. Ask gorm what each model is stored as instead, which follows a TableName override and the default pluralisation alike. A spec pins that the override really is consulted: naive pluralisation of the type would give gallery_operation_records, so the resolution cannot quietly stop asking the model. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> --------- Signed-off-by: Ettore Di Giacinto <mudler@localai.io> Co-authored-by: Ettore Di Giacinto <mudler@localai.io>	2026-09-02 12:37:12 +02:00
mudler's LocalAI [bot]andEttore Di Giacinto	fb4c61d1c9	fix(distributed): configurable remote model-load timeout, and reap the load when it times out (#10948) ... * fix(distributed): make the remote LoadModel deadline configurable The router hardcoded a 5 minute gRPC deadline for the remote LoadModel call. Staging finishes before the timer starts, so those five minutes cover only the worker backend's own checkpoint load and pipeline init. A cold load of meituan-longcat/LongCat-Video-Avatar-1.5 (~83 GB) on an ARM64 Thor worker fails at exactly 302s with DeadlineExceeded while the backend process is still making progress (CPU time accumulating, RSS moving as weights are mapped), so the load was cut short rather than wedged. Add LOCALAI_NATS_MODEL_LOAD_TIMEOUT / --model-load-timeout mirroring the existing backend-install timeout knob, defaulting to 5m so unset clusters keep today's behaviour. The cold-load hold ceiling (which bounds how long one load may hold the per-model advisory lock) was derived from the install timeout alone, so raising the load deadline past it would have been silently clipped. Derive it from both budgets via ModelLoadCeilingFor: max(install + load + 5m staging margin, 25m) With the defaults that is 15m + 5m + 5m = 25m, identical to the previous constant, and the 25m floor means shrinking either budget can never tighten the ceiling below what clusters relied on before. Assisted-by: Claude:claude-opus-4-8 golangci-lint Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(distributed): reap the abandoned replica when a remote load times out The gRPC deadline on the remote LoadModel call only cancels the client side. A backend blocked in a synchronous weight load never observes its cancelled handler context, so when scheduleAndLoad gave up it left the worker loading with nobody waiting for the result. Observed on an ARM64 Thor worker loading LongCat-Video-Avatar-1.5: the client returned DeadlineExceeded at 302s, and the backend process was still alive 30 minutes later having pulled ~57GB from HuggingFace. Every retry stacked another multi-GB loader on the worker; they had to be reaped by hand via POST /api/nodes/:id/models/unload. Send backend.stop for the exact `modelID#replicaIndex` process key we just abandoned. The exact key matters: a bare model ID stops every replica on that node, including healthy ones serving traffic. Only a deadline or cancellation triggers the reap. Any other LoadModel failure is the backend answering, which means its handler returned and the process is idle - stopping it there would discard a warm process and its downloaded weights. The reap is best-effort and never replaces the load error the caller is waiting on. The `modelID#replicaIndex` format was already hand-rolled in two places (the worker's buildProcessKey and pkg/model's log store). Rather than add a third, export model.BackendProcessKey from pkg/model, the lowest common dependency of both sides. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> Assisted-by: Claude:claude-opus-4-8 golangci-lint --------- Signed-off-by: Ettore Di Giacinto <mudler@localai.io> Co-authored-by: Ettore Di Giacinto <mudler@localai.io>	2026-07-19 12:01:48 +02:00
Richard Palethorpe	73385713ca	feat(distributed): enforce registration token for worker file transfer (#10183) ... The worker HTTP file-transfer server is authenticated by the registration token via checkBearerToken, which fails open on an empty token: every /v1/files, /v1/files-list and /v1/backend-logs request is then served unauthenticated, granting read/write to the worker's models/staging/data directories. The fail-open was also silent (the only auth log sat on the unreachable reject branch), and the worker process never runs DistributedConfig.Validate(), so the existing frontend warning did not cover the component that exposes the server. Mirror the NatsRequireAuth pattern: keep anonymous as the default but make it loud and opt-in enforceable. - Log a prominent warning when the file-transfer server starts tokenless. - Add LOCALAI_REGISTRATION_REQUIRE_AUTH: DistributedConfig.Validate() errors on an empty token (frontend) and the worker refuses to start (fail-fast, before registration), so production can fail closed. Also satisfies the F-003 suggestion to fail Validate() on distributed + empty token. - Add LOCALAI_DISTRIBUTED_REQUIRE_AUTH umbrella switch implying both RegistrationRequireAuth and NatsRequireAuth — one production knob locking down the registration/file-transfer layer and the NATS bus together; the granular flags remain available as single-layer overrides. Wired into the frontend, supervisor worker, and agent worker (vLLM worker has neither a NATS connection nor a file-transfer server, so it is left untouched). - Document in distributed-mode.md (warning callout + flag tables). Assisted-by: Claude:claude-opus-4-8 [Claude Code] Signed-off-by: Richard Palethorpe <io@richiejp.com>	2026-06-05 14:34:28 +02:00
LocalAI [bot]andEttore Di Giacinto	a0f3e26245	fix(distributed): make admin backend installs resilient and observable (#9958) ... * feat(distributed): add configurable NATS backend install/upgrade timeouts Adds BackendInstallTimeout and BackendUpgradeTimeout to DistributedConfig with 15m defaults, following the existing MCPToolTimeout / WorkerWaitTimeout pattern. These will replace the hardcoded literals in RemoteUnloaderAdapter so admin-driven backend installs across the cluster survive long OCI image pulls that previously timed out at 3m. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * style(distributed): gofmt alignment after timeout fields Re-aligns the Validate() negative-duration map and the Default* const block so the new BackendInstall/UpgradeTimeout entries do not leave the surrounding columns mis-padded. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(cli): surface LOCALAI_NATS_BACKEND_INSTALL_TIMEOUT and _UPGRADE_TIMEOUT Parses the two new env vars on the run CLI and threads them through the existing AppOption builder so DistributedConfig picks them up. Invalid duration strings now fail loudly at startup rather than silently falling back to the default. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(distributed): inject NATS install/upgrade timeouts into RemoteUnloaderAdapter Removes the hardcoded 3m / 15m literals from RemoteUnloaderAdapter and threads in DistributedConfig.BackendInstallTimeoutOrDefault() and BackendUpgradeTimeoutOrDefault() at construction. Install now defaults to 15m (was 3m); cold OCI image pulls on Jetson Wi-Fi routinely blew past the old ceiling. Scripted messaging client captures the timeout so tests can assert the configured value actually reaches the NATS request. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(distributed): introduce galleryop.ErrWorkerStillInstalling sentinel When the NATS request-reply for backend.install (or .upgrade) times out the worker is almost always still pulling the OCI image. Wrap the timeout in a typed sentinel so the manager above can distinguish "worker hung" from "worker still working" and leave the pending_backend_ops row in place for the reconciler to confirm via backend.list. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(distributed): treat NATS install timeout as in-progress, not failure When a worker times out replying to backend.install but the install is still running on the worker, enqueueAndDrainBackendOp now reports a running_on_worker status and pushes NextRetryAt out by the install timeout so the reconciler does not immediately re-fire another install while the worker is still pulling the image. The pending_backend_ops row stays in place for the next reconciler pass to confirm via backend.list. InstallBackend wraps the result in galleryop.ErrWorkerStillInstalling so callers can branch (galleryop renders yellow in-progress instead of red error). UpgradeBackend uses the same wrap. Adds RemoteUnloaderAdapter.InstallTimeout() so the manager can push NextRetryAt by the configured timeout without reaching into a private field, and NodeRegistry.RecordPendingBackendOpInFlight as the soft cousin of RecordPendingBackendOpFailure. Also includes incidental gofmt-driven struct-field alignment in registry.go on lines unrelated to the change (touched files are re-formatted to canonical form per project policy). Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(distributed): don't increment Attempts on in-flight install timeout An in-flight timeout (worker still pulling the OCI image) is not a failed attempt, it's a delayed one. Incrementing Attempts let genuinely-progressing slow installs (e.g. 30 GB CUDA images on Wi-Fi) trip the reconciler's maxPendingBackendOpAttempts cap and dead-letter the queue row while the worker was still legitimately working. RecordPendingBackendOpInFlight now only updates LastError and NextRetryAt. Also documents "running_on_worker" in the NodeOpStatus.Status enum comment so Task 6 implementers see the full surface. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(galleryop): surface ErrWorkerStillInstalling as non-error OpStatus When the distributed backend manager returns an error that wraps ErrWorkerStillInstalling, backendHandler now completes the op with a "still installing in background" message rather than marking it as a red failure. Admin UI sees a yellow in-progress state; reconciler confirms completion on its next pass. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(distributed): end-to-end install-timeout-then-reconcile Wires Task 1-6 end-to-end so any seam mismatch surfaces in CI rather than during a real cluster install. NATS times out, the queue row stays alive with running_on_worker status, the worker eventually reports the backend installed via backend.list, the manager surfaces it via ListBackends. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * docs(distributed): document LOCALAI_NATS_BACKEND_INSTALL_TIMEOUT / _UPGRADE_TIMEOUT Add the two new operator-tunable env vars to the Frontend Configuration table in the distributed-mode docs. Explains the 15m default, when to raise it (slow links pulling multi-GB OCI images), and the new "still installing in background" admin-UI state when the round-trip times out but the worker is still working. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(distributed): clear pending install rows when backend.list confirms DistributedBackendManager.ListBackends now proactively clears pending_backend_ops install rows whose (nodeID, backend) is reported installed by backend.list. Operator UI updates immediately instead of waiting up to installTimeout (default 15m) for the next reconciler tick after NextRetryAt. Only install rows are cleared; upgrade and delete intents are not satisfied by presence in backend.list and continue to drain through their normal reconciler paths. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(messaging): add BackendInstallProgressEvent wire type and subject New NATS subject nodes.<nodeID>.backend.install.<opID>.progress lets the worker publish transient progress events (file, current/total bytes, percentage, phase) while a long-running install pulls its OCI image. BackendInstallRequest gains an optional OpID field so the worker knows which subject to publish on. Transient pub/sub (not JetStream): the install reply remains ground truth for success/failure; dropped progress events are tolerable. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * style(messaging): drop em-dash from BackendInstallProgress test comment Per project convention (no em-dashes anywhere). Comment substance is unchanged. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(distributed): worker publishes debounced install progress over NATS When BackendInstallRequest.OpID is set, the worker's backend.install handler wires a debounced publisher (250ms window) into the gallery download callback. Each tick becomes a BackendInstallProgressEvent on nodes.<nodeID>.backend.install.<opID>.progress; the publisher always emits a final event on Flush so the UI sees the terminal percentage. Old masters that do not set OpID continue to run silent installs: no behavior change for them. Lock ordering: the publisher releases its mutex before calling messaging.Publish so a slow network never stalls the install loop. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(distributed): RemoteUnloaderAdapter subscribes to install progress InstallBackend gains opID + onProgress parameters. When both are set, the adapter subscribes to nodes.<nodeID>.backend.install.<opID>.progress BEFORE publishing the install request, decodes each message into the caller's onProgress callback in a goroutine (so a slow callback never stalls the NATS reader thread), and unsubscribes after RequestJSON returns. When onProgress is nil OR opID is empty (the reconciler retry path), subscription is skipped entirely - silent installs cost nothing extra. Subscribe failure is logged at Warn and the install proceeds without progress streaming; the NATS round-trip still owns terminal status. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(distributed): forward backend install progress into galleryop OpStatus DistributedBackendManager.InstallBackend now passes the gallery op ID and a progress bridge into the adapter call. Each BackendInstallProgressEvent from the worker becomes a galleryop.ProgressCallback tick - which the existing backendHandler already turns into OpStatus.UpdateStatus, so the admin UI/SSE polling sees per-byte progress for distributed installs without any UI-side change. UpgradeBackend is intentionally left silent for now: its wire request (BackendUpgradeRequest) does not carry OpID, and rolling-update fallback is the rarer path. Will be picked up in a follow-up if the worker upgrade path also gets a progress channel. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(distributed): InstallBackend tolerates silent (pre-Phase-2) workers A worker on pre-Phase-2 code never publishes progress events. The new master subscribes optimistically; this spec pins that a silent worker still produces a green install with no progressCb ticks. The install reply is the source of truth for terminal state; the progress stream is a best-effort UX enrichment. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * docs(distributed): document install progress streaming Note the new nodes.<nodeID>.backend.install.<opID>.progress subject and the silent-worker compatibility behavior so operators know to expect real-time progress and what happens on a mixed-version cluster. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * docs(distributed): note progress-event ordering trade-off in InstallBackend Document near the goroutine dispatch why ordering at the consumer is best-effort, why it rarely matters in practice (worker debounce >> goroutine jitter), and what a future hardening pass would look like (Seq field + stale-by-seq drop). Stops the next reader from accidentally "fixing" the goroutine pool away. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(galleryop): add NodeProgress + OpStatus.Nodes for per-node breakdown Adds the data model the UI needs to render an expandable per-node breakdown of a fanned-out backend install. NodeProgress carries node identity (ID + name), per-node status (queued / running_on_worker / success / error / downloading), the current file + bytes + percentage from the Phase 2 progress stream, and any per-node error. OpStatus.Nodes is the slice the /api/operations handler will surface in a follow-up. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(galleryop): UpdateNodeProgress merges per-node ticks by NodeID GalleryService.UpdateNodeProgress(opID, nodeID, np) merges a NodeProgress into OpStatus.Nodes (keyed by NodeID, no duplicates) and mirrors the latest tick into the aggregate Progress / FileName / DownloadedFileSize / TotalFileSize fields so the legacy single-bar OperationsBar view keeps working unchanged alongside the new per-node breakdown. Concurrent-safe via the existing g.Mutex. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(distributed): write per-node OpStatus entries during install fan-out DistributedBackendManager now accepts a nodeProgressSink and feeds it two streams: 1. enqueueAndDrainBackendOp emits a per-node terminal entry on each status it appends to BackendOpResult (queued, success, error, running_on_worker). The opID is threaded through the function so the sink gets the right gallery op identity. 2. The install apply closure fans each BackendInstallProgressEvent into the sink as a downloading entry, alongside the legacy progressCb path so the aggregate single-bar view stays correct. Production wiring passes the GalleryService (which implements UpdateNodeProgress via Task 2) as the sink. Single-node tests pass nil. DeleteBackend and UpgradeBackend pass an empty opID so the sink path no-ops for ops that aren't gallery-tracked the same way as Install. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(operations): expose per-node breakdown on /api/operations When an operation's OpStatus has Nodes entries (populated by the Phase 4 progress sink wiring), surface them as a "nodes" array on the /api/operations response, sorted by node_name for stable rendering. Backward compatible: legacy clients ignore the field; ops without any node entries (single-node mode, model installs) omit the array entirely thanks to the empty-slice guard. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(ui): per-node breakdown in OperationsBar When an install op fans out to more than one worker, the operations bar now shows a "N nodes" chevron that expands into a per-node list. Each row carries the node's status (color-coded pill), the current file being downloaded, byte counts, percentage, and a thin per-node progress bar. Yellow "Worker busy" pill marks running_on_worker status with a tooltip explaining the NATS round-trip timed out but the worker is still installing in the background. Backward compatible: ops without a nodes field (legacy or single-node mode) render as before. State for expand/collapse is local to the component, keyed by jobID/id - reload starts collapsed. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * docs(distributed): document per-node breakdown in the operations bar Adds a short subsection covering the expandable "N nodes" chevron in the OperationsBar admin UI, the meaning of each status pill, and how it relates to the /api/operations nodes array. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(galleryop): UpdateStatus preserves Nodes when caller sends none Real-world bug surfaced by the Phase 4 multi-worker smoke test: the nodes[] array in /api/operations flickered between a single node at a time on a 2-worker install. Root cause: the Phase 2 progress bridge also calls the legacy progressCb -> UpdateStatus(&OpStatus{...}) on every tick. UpdateStatus then overwrote the entire status pointer, wiping the Nodes slice that UpdateNodeProgress had just merged in. Fix: in UpdateStatus, if the incoming op has an empty Nodes slice, carry forward the previous status's Nodes before storing. Callers that explicitly populate Nodes still win (their slice replaces the prior one, no merge across the two code paths). Two regression specs added pinning both directions of the contract. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * docs(distributed): strip implementation details from user-facing docs Trim the new install/upgrade timeout rows and the install-progress sections to focus on what the operator sees and tunes. Drops: - the NATS subject names and pub/sub mechanics - "round-trip" / reconciler / backend.list jargon - /api/operations polling cadence - "pre-2026-05-22" version references Reframes the breakdown text around the admin UI (Operations Bar, chevron, status pills, "Worker busy" tooltip). Implementation context lives in the agent notes and code comments. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * refactor(config): move DistributedConfig.Validate flag names to constants The negative-duration check map was a wall of literal kebab-case strings that had to stay in sync with the kong-derived CLI flag names manually. Move them to a Flag* const block alongside the existing Default* block so a rename of either the Go field or the CLI naming convention forces a compile error rather than silent drift. Sole consumer today is Validate; the constants are exported so future operator-facing surfaces (e.g. error messages on other validation paths) can reference them by name instead of repeating the literals. Tests pin both the literal values (so a future "let's just rename this" doesn't accidentally regress the CLI flag) and the negative- duration error message for the new BackendInstall / BackendUpgrade fields. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * refactor(distributed): extract NodeStatus and Phase enums to constants Sweep for the same literal-string-as-identifier pattern called out on the Validate flag names: the per-node install status enum ("queued" | "downloading" | "running_on_worker" | "success" | "error") appeared as raw literals across managers_distributed.go (10+ sites, including 3 separate `n.Status == "running_on_worker"` checks), operation.go, and the test suite. Same shape for the Phase enum ("resolving" | "downloading" | "extracting" | "starting") in the worker-side progress publisher. Promote both to exported const blocks: - galleryop.NodeStatus{Queued,Downloading,RunningOnWorker,Success,Error} shared between galleryop.NodeProgress.Status (the wire field) and nodes.NodeOpStatus.Status (the in-process per-node summary) - messaging.Phase{Resolving,Downloading,Extracting,Starting} shared between the worker publisher and any future consumer that needs to switch on phase Tests pin both the literal values (so a future "let's just rename" doesn't silently change the JSON wire) and use the constants in setup (so the producer side stays drift-protected). Wire-format assertions on the /api/operations JSON output keep their literals deliberately, so the constant value can never silently diverge from what the UI receives. Out of scope for this PR (separate cleanup): the finetune and quantization job-status enums have the same anti-pattern with 14+ literal sites each, but predate this PR's work. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> --------- Signed-off-by: Ettore Di Giacinto <mudler@localai.io> Co-authored-by: Ettore Di Giacinto <mudler@localai.io>	2026-05-23 12:35:44 +02:00