mirror of
https://github.com/mudler/LocalAI.git
synced 2026-07-31 10:28:43 -04:00
TTSStream leads with a streaming WAV header carrying 0xFFFFFFFF sizes, matching the convention backend/go/vibevoice-cpp established, so an HTTP client can start playback before the full PCM exists. Its chunks are read from StreamEvent::named_audio_outputs and not audio_output: supertonic, omnivoice and voxcpm2 all put their streamed audio there and leave audio_output empty until the very end, so reading the obvious field yields a stream with no audio in it. The finish_stream result is the family's own merged whole rather than a tail, so it is emitted only when nothing was streamed. Streaming transcription sends incremental deltas and degrades to a single delta plus the final result on families that offer no streaming ASR, which is the same message sequence with fewer deltas. The four streaming ASR families disagree on what partial_text means: nemotron_asr, vibevoice_asr and higgs_audio_stt report incremental fragments while voxtral_realtime reports the whole hypothesis and reports it twice, so the reconciliation lives in one tested unit rather than in the handler. nemotron_asr reports only through the stream event sink, and only from inside finalize, so the audio driver installs one and clears it again before returning: the session is cached and a sink left holding the caller's frame is a use after free waiting for the next stream. begin_stream is now the only implementation of the streaming state obligation, prepare then start_stream. Streaming sessions are cached, and what clears the previous stream is start_stream's reset; a family override that dropped it would break every call site with no compile error, so there is one call site. Assisted-by: Claude:claude-opus-5 [Claude Code] Signed-off-by: Ettore Di Giacinto <mudler@localai.io>
333 lines
17 KiB
C++
333 lines
17 KiB
C++
#pragma once
|
|
|
|
// Owns one audio.cpp model for the life of the process, plus a lazily created
|
|
// session per (task, mode) so the same model answers both TTS and TTSStream.
|
|
// This is the only unit that converts between the stdlib-only mirror types and
|
|
// engine::runtime types.
|
|
|
|
#include "capability_routing.h"
|
|
#include "inference_lane.h"
|
|
#include "model_options.h"
|
|
|
|
#include "engine/framework/runtime/model.h"
|
|
#include "engine/framework/runtime/registry.h"
|
|
#include "engine/framework/runtime/session.h"
|
|
|
|
#include <functional>
|
|
#include <map>
|
|
#include <memory>
|
|
#include <stdexcept>
|
|
#include <string>
|
|
#include <utility>
|
|
#include <vector>
|
|
|
|
namespace audiocpp_backend {
|
|
|
|
// User-fixable configuration problem. grpc-server maps this to INVALID_ARGUMENT.
|
|
class ConfigError : public std::runtime_error {
|
|
public:
|
|
using std::runtime_error::runtime_error;
|
|
};
|
|
|
|
// The family cannot serve the requested RPC. Maps to UNIMPLEMENTED.
|
|
class CapabilityError : public std::runtime_error {
|
|
public:
|
|
using std::runtime_error::runtime_error;
|
|
};
|
|
|
|
engine::runtime::VoiceTaskKind to_engine_task(Task task);
|
|
engine::runtime::RunMode to_engine_mode(Mode mode);
|
|
Task from_engine_task(engine::runtime::VoiceTaskKind kind);
|
|
Mode from_engine_mode(engine::runtime::RunMode mode);
|
|
Capabilities to_capabilities(const std::string &family,
|
|
const engine::runtime::CapabilitySet &set);
|
|
|
|
// Reads audiocpp.model_spec.family from a GGUF. Returns an empty string when
|
|
// the file is not a GGUF, carries no audio.cpp spec, or cannot be read. Never
|
|
// throws: an unreadable file is the load gate's problem, not a crash.
|
|
std::string read_gguf_family(const std::string &path);
|
|
|
|
// Builds the absolute model path from LocalAI's (ModelPath, ModelFile, Model)
|
|
// triple. A model file of the form "bundled:<name>" resolves to
|
|
// <executable dir>/assets/<name>, which is where package.sh puts upstream's
|
|
// bundled silero_vad and marblenet_vad assets.
|
|
std::string resolve_model_path(const std::string &model_path_dir,
|
|
const std::string &model_file,
|
|
const std::string &model_name);
|
|
|
|
class LoadedModel {
|
|
public:
|
|
struct Session {
|
|
Task task = Task::Tts;
|
|
Mode mode = Mode::Offline;
|
|
// Exactly one of these is non-null, matching the resolved mode.
|
|
engine::runtime::IOfflineVoiceTaskSession *offline = nullptr;
|
|
engine::runtime::IStreamingVoiceTaskSession *streaming = nullptr;
|
|
};
|
|
|
|
// Throws ConfigError when the path does not exist, the family cannot be
|
|
// determined, or the registry rejects the family.
|
|
//
|
|
// `model_identity` is ModelOptions.Model verbatim: the UNTRANSLATED
|
|
// controller-side name. It is a constructor argument rather than a setter
|
|
// so identity and model are inseparable. llama-cpp keeps its equivalent in
|
|
// a separate global from the model, which leaves a window where a handler
|
|
// can read one without the other; here a handler that holds the model
|
|
// through snapshot() necessarily holds the identity it was loaded with.
|
|
LoadedModel(const std::string &resolved_path, const ModelOptions &options,
|
|
std::string model_identity);
|
|
|
|
LoadedModel(const LoadedModel &) = delete;
|
|
LoadedModel &operator=(const LoadedModel &) = delete;
|
|
|
|
const std::string &family() const noexcept { return capabilities_.family; }
|
|
// Empty when the controller predates ModelOptions.ModelIdentity, which the
|
|
// identity check reads as "skip". See check_model_identity in grpc-server.
|
|
const std::string &identity() const noexcept { return identity_; }
|
|
const std::string &variant() const noexcept { return variant_; }
|
|
const std::string &description() const noexcept { return description_; }
|
|
const std::vector<std::string> &languages() const noexcept { return languages_; }
|
|
const Capabilities &capabilities() const noexcept { return capabilities_; }
|
|
bool supports_timestamps() const noexcept { return supports_timestamps_; }
|
|
const engine::runtime::SessionOptions &session_options() const noexcept {
|
|
return session_options_;
|
|
}
|
|
|
|
// The model's `task:` option, empty when unset. Every handler must copy it
|
|
// into RequestShape::pinned_task before calling session_for: routing is
|
|
// otherwise derived from the RPC alone, and this is the option's only route
|
|
// from the load to the request that honours it.
|
|
const std::string &pinned_task() const noexcept { return pinned_task_; }
|
|
|
|
// Throws the same CapabilityError session_for would throw when this family
|
|
// cannot serve the RPC, and RETURNS THE RESOLVED ROUTE otherwise.
|
|
//
|
|
// The route is returned rather than computed and dropped because a handler
|
|
// often has to know which task it is about to run BEFORE running it.
|
|
// AudioTransform refuses params[stem] on any route but source separation,
|
|
// and reading that off the route costs microseconds where reading it off
|
|
// the result costs a whole inference first. A caller with no such need
|
|
// ignores the value, which is what the three transcription-shaped handlers
|
|
// do.
|
|
//
|
|
// It exists so a refusal does not have to buy a place in the queue first.
|
|
// resolve_route is a pure function of capabilities_, which is fixed at
|
|
// construction and never written again, so unlike the session cache it
|
|
// needs no lane and no lock: a model that cannot transcribe can say so
|
|
// while another request is halfway through a thirty second run. Without
|
|
// this the refusal waits for that run to finish only to be told no.
|
|
//
|
|
// It does NOT replace the routing inside session_for, and must not be made
|
|
// to: session_for still needs the route to key the session cache. The two
|
|
// calls agree because both read the same immutable capabilities. What this
|
|
// one adds is only the ordering, so call it before acquire().
|
|
//
|
|
// Const and lane-free on purpose. If a future edit makes routing depend on
|
|
// mutable state, this must grow the lane parameter its siblings carry.
|
|
Route check_can_serve(Rpc rpc, const RequestShape &shape) const;
|
|
|
|
// Routes the RPC and returns the cached session, creating it on first use.
|
|
// Throws CapabilityError when this family cannot serve the RPC, and a plain
|
|
// runtime_error when it can but the session could not be built, which is an
|
|
// environment fault rather than a capability answer.
|
|
//
|
|
// The `lane` parameter is a PROOF OF HOLDING and is otherwise unused: it
|
|
// exists so the rule below is a compile error rather than prose. The
|
|
// session cache is an unsynchronised std::map and the sessions themselves
|
|
// are not reentrant, so this must only be called with the lane held; the
|
|
// lane admits one caller at a time, which is exactly the constraint the
|
|
// sessions impose. Pass the LaneEntry from acquire().
|
|
//
|
|
// NON-CONST reference on purpose, and do not "tidy" it to const. A const
|
|
// reference binds to a temporary, which makes this compile:
|
|
//
|
|
// auto session = model->session_for(rpc, shape, model->acquire(0));
|
|
// auto result = run_offline(session, task, model->acquire(0));
|
|
//
|
|
// and each temporary dies at the end of its own full-expression, so the
|
|
// lane is released between the two calls. That is precisely the split this
|
|
// parameter exists to prevent, and it is the form a future caller is most
|
|
// likely to reach for because it reads as tidy. Requiring an lvalue forces
|
|
// a named entry whose scope spans both calls.
|
|
//
|
|
// What it proves is bounded, so do not over-trust it: it proves A lane was
|
|
// taken, not THIS model's lane. A caller determined to defeat it can
|
|
// construct an entry on an unrelated InferenceLane and pass that. It
|
|
// therefore catches the two mistakes that actually happen, forgetting the
|
|
// lane entirely and taking it after routing, and does not catch lane
|
|
// identity.
|
|
//
|
|
// STATE CONTRACT, and it is the CALLER'S to honour. Sessions are cached per
|
|
// (task, mode), so a streaming session is normally the same warm object the
|
|
// previous stream used, carrying that stream's state. session_for hands it
|
|
// back as it is.
|
|
//
|
|
// Every streaming caller must therefore begin a stream through
|
|
// begin_stream() below, which is prepare() then start_stream() in that
|
|
// order and is the ONLY implementation of that sequence. start_stream's
|
|
// base implementation is a call to reset(), which is what clears the
|
|
// previous stream, and reset() is only legal after prepare(): silero_vad
|
|
// throws "session prepare() must be called before Silero VAD reset()"
|
|
// otherwise. That ordering constraint is also why session_for cannot do
|
|
// this for you. Skipping it does not raise an error, it silently continues
|
|
// the previous stream.
|
|
//
|
|
// Offline sessions need no such care: their interface has no reset and
|
|
// run() takes a whole request.
|
|
Session session_for(Rpc rpc, const RequestShape &shape, LaneEntry &lane);
|
|
|
|
// Takes the inference lane, or throws LaneUnavailable. Serializes runs
|
|
// against this model. `requested_timeout_ms` is a per-request wait hint
|
|
// where a value <= 0 means "use the model's configured ceiling"; a hint may
|
|
// only tighten that ceiling, never loosen it.
|
|
//
|
|
// LaneEntry is deliberately immovable, so bind the result to a named local
|
|
// in the scope the inference happens in:
|
|
//
|
|
// LaneEntry entry = model.acquire(request_hint_ms);
|
|
//
|
|
// which C++17 initializes in place. A handler that has to keep the lane
|
|
// beyond one scope, for instance in a member that outlives the call that
|
|
// took it, wants acquire_owned instead.
|
|
LaneEntry acquire(int requested_timeout_ms);
|
|
|
|
// Same lane, heap-allocated so it can be stored or handed on. Prefer
|
|
// acquire: this one adds a null state that the scoped form does not have.
|
|
std::unique_ptr<LaneEntry> acquire_owned(int requested_timeout_ms);
|
|
|
|
private:
|
|
// Keyed by the enum values so the map needs no custom comparator.
|
|
using SessionKey = std::pair<int, int>;
|
|
|
|
// The public constructor runs the load gate, then delegates here. The
|
|
// detour exists because lane_ has to be built from the family in the member
|
|
// initializer list, and the family is only known after the gate has run.
|
|
// Four parameters rather than three so it cannot be confused with the
|
|
// public constructor, whose third argument is also a std::string.
|
|
LoadedModel(const std::string &resolved_path, const ModelOptions &options,
|
|
std::string family, std::string model_identity);
|
|
|
|
// MEMBER ORDER IS LOAD-BEARING BELOW THIS LINE. Members are destroyed in
|
|
// reverse declaration order.
|
|
//
|
|
// lane_ is first so it is destroyed last: nothing that runs during teardown
|
|
// can then find a lane that has already gone.
|
|
InferenceLane lane_;
|
|
// registry_ before model_: the registry owns the loader that produced the
|
|
// model, and the model may hold loader-owned state.
|
|
engine::runtime::ModelRegistry registry_;
|
|
// model_ before sessions_, so sessions_ is destroyed FIRST and the model
|
|
// second. A session is created from the model and must not outlive it. Do
|
|
// not reorder these two.
|
|
std::unique_ptr<engine::runtime::ILoadedVoiceModel> model_;
|
|
std::map<SessionKey, std::unique_ptr<engine::runtime::IVoiceTaskSession>> sessions_;
|
|
|
|
engine::runtime::SessionOptions session_options_;
|
|
Capabilities capabilities_;
|
|
std::string variant_;
|
|
std::string description_;
|
|
std::vector<std::string> languages_;
|
|
std::string pinned_task_;
|
|
std::string identity_;
|
|
bool supports_timestamps_ = false;
|
|
int wait_budget_ceiling_ms_ = 0;
|
|
};
|
|
|
|
// Prepares and runs an offline session. prepare() is called for every run
|
|
// rather than once per session, because SessionPreparationRequest is derived
|
|
// from the request itself (audio contract, text, voice condition) and not from
|
|
// the model: a second request with a different sample rate or length would
|
|
// otherwise run against the first request's contract.
|
|
//
|
|
// `lane` is a PROOF OF HOLDING, unused at runtime, for the same reason
|
|
// session_for takes one: the session is not reentrant and prepare() mutates it,
|
|
// so running without the lane is a data race. Making it a parameter turns that
|
|
// into a compile error instead of a comment. Non-const for the same reason as
|
|
// session_for's: a const reference would bind to `model.acquire(0)` written
|
|
// inline, and that temporary dies at the end of this call, releasing the lane
|
|
// before the caller's next one.
|
|
//
|
|
// Throws CapabilityError when the session is not an offline one. That should be
|
|
// unreachable through session_for, which already refuses a non-offline session
|
|
// for an offline route, and is checked anyway because the alternative is a null
|
|
// dereference.
|
|
engine::runtime::TaskResult run_offline(const LoadedModel::Session &session,
|
|
const engine::runtime::TaskRequest &request,
|
|
LaneEntry &lane);
|
|
|
|
// THE ONE IMPLEMENTATION of the streaming state obligation described in
|
|
// session_for's STATE CONTRACT: prepare(), then start_stream(), in that order.
|
|
//
|
|
// It is a function rather than a comment because the obligation is invisible
|
|
// when it is broken. Streaming sessions are CACHED per (task, mode), so the
|
|
// object a second stream gets is the warm one the first stream left behind,
|
|
// still holding its audio, its tokens and its started flag. What clears it is
|
|
// start_stream, whose base implementation IS a reset() and whose seven family
|
|
// overrides (nemotron_asr, vibevoice_asr, higgs_audio_stt, voxtral_realtime,
|
|
// supertonic, omnivoice, voxcpm2) every one call reset() as their first
|
|
// statement, verified in the pinned checkout. Nothing in the type system pins
|
|
// that. A future override that dropped the reset would break every call site
|
|
// at once with no compile error and no exception, only a second transcript
|
|
// that begins with the first one's audio, so the fewer call sites there are to
|
|
// break, the better: this is the only one.
|
|
//
|
|
// prepare() must come first and cannot be folded into session_for, because
|
|
// reset() is illegal before prepare() (silero_vad throws "session prepare()
|
|
// must be called before Silero VAD reset()"), and because the preparation
|
|
// request is derived from the REQUEST, not the model: build_preparation_request
|
|
// reads the audio contract, the text and the voice condition off it, so a
|
|
// second stream with a different sample rate or length would otherwise run
|
|
// against the first stream's contract.
|
|
//
|
|
// `lane` is a PROOF OF HOLDING, unused at runtime, exactly as in run_offline.
|
|
//
|
|
// Throws CapabilityError when the session is not a streaming one.
|
|
void begin_stream(const LoadedModel::Session &session,
|
|
const engine::runtime::TaskRequest &request, LaneEntry &lane);
|
|
|
|
// Drives a streaming session that takes NO incremental input, which is the TTS
|
|
// shape (StreamingInputKind::None, StreamingOutputKind::PullEvents): begin the
|
|
// stream, pull events until the session says there are no more, then finish.
|
|
//
|
|
// NO STREAM EVENT SINK IS INSTALLED HERE, and that is deliberate rather than an
|
|
// omission. voxcpm2's start_stream runs the whole synthesis and pushes every
|
|
// chunk to the sink, then its next_stream_event replays those same chunks out
|
|
// of the stored result, so a sink on this path would put every chunk of audio
|
|
// on the wire twice. supertonic and omnivoice ignore set_stream_event_sink
|
|
// outright. The pull loop is therefore the single delivery channel.
|
|
//
|
|
// The returned TaskResult is the session's own merged whole for all three
|
|
// families, NOT a tail the pull loop missed. A caller that already emitted the
|
|
// pulled events must not also emit its audio; see the TTSStream handler.
|
|
engine::runtime::TaskResult run_streaming_pull(
|
|
const LoadedModel::Session &session,
|
|
const engine::runtime::TaskRequest &request,
|
|
const std::function<void(const engine::runtime::StreamEvent &)> &on_event,
|
|
LaneEntry &lane);
|
|
|
|
// Drives a streaming session that CONSUMES audio chunks, which is the ASR shape
|
|
// (StreamingInputKind::AudioChunks): begin the stream, feed the buffer in
|
|
// policy-sized chunks, then finalize.
|
|
//
|
|
// A STREAM EVENT SINK IS INSTALLED HERE, and it is not optional: nemotron_asr
|
|
// reports its partial text ONLY through the sink, and only from inside
|
|
// finalize(), because its decode does not start until the audio is complete.
|
|
// Without the sink that family streams a transcript with no partials at all.
|
|
// The sink is cleared again before returning, including on the exception path:
|
|
// the session is cached and outlives this call, so a sink left holding a
|
|
// reference to the caller's frame is a use after free waiting for the next
|
|
// stream.
|
|
//
|
|
// Both delivery channels are consumed, the sink and the value process_audio_chunk
|
|
// returns, because the families do not agree on which they use, and
|
|
// voxtral_realtime uses BOTH for the same event. The duplicate that produces is
|
|
// absorbed by TranscriptDeltaTracker in stream_delta.h rather than here.
|
|
engine::runtime::TaskResult run_streaming_audio(
|
|
const LoadedModel::Session &session,
|
|
const engine::runtime::TaskRequest &request,
|
|
const engine::runtime::AudioBuffer &audio,
|
|
const std::function<void(const engine::runtime::StreamEvent &)> &on_event,
|
|
LaneEntry &lane);
|
|
|
|
} // namespace audiocpp_backend
|