718223f33b
* chore(localvqe): update backend to v1.3, add v1.2/v1.3 gallery models Bump the LocalVQE backend pin 72bfb4c6 -> b0f0378a, which adds the v1.2 (1.3 M) and v1.3 (4.8 M) GGUF SHA-256s to the upstream released-models allowlist (and the arch_version=3 loader) so both load without LOCALVQE_ALLOW_UNHASHED. Add gallery entries for localvqe-v1.2-1.3m and localvqe-v1.3-4.8m (SHA-256 verified against the downloaded weights) and update the audio-transform docs to make v1.3 the current default while noting the compact v1.1/v1.2 alternatives. Assisted-by: Claude:claude-opus-4-8 Claude-Code Signed-off-by: Richard Palethorpe <io@richiejp.com> * chore(flake): add ffmpeg-headless to the dev shell pkg/utils/ffmpeg_test.go shells out to the `ffmpeg` CLI, and the pre-commit gate runs those tests via `make test-coverage`. Without ffmpeg in the dev shell the gate fails with "executable file not found in $PATH". The headless build provides the CLI without GUI/X deps. Assisted-by: Claude:claude-opus-4-8 [Claude Code] Signed-off-by: Richard Palethorpe <io@richiejp.com> * fix(localvqe): parse WAV by walking RIFF sub-chunks Walk the RIFF chunk list instead of assuming the canonical 44-byte header layout. Real inputs (browser-recorded clips, ffmpeg output with an 18/40-byte extensible `fmt ` chunk or trailing LIST/INFO metadata) would otherwise splice header/metadata bytes into the PCM stream as an audible impulse. Honour the `data` chunk size and validate that both `fmt ` and `data` chunks are present. Assisted-by: Claude:claude-opus-4-8 [Claude Code] Signed-off-by: Richard Palethorpe <io@richiejp.com> * fix(security-headers): allow blob: in connect-src for waveform fetch The waveform renderer XHRs/fetches a freshly-created blob: object URL (e.g. an uploaded or enhanced clip before it has a server URL). XHR/fetch of blob: is governed by connect-src, not media-src, so it was blocked by the CSP. Add blob: to connect-src. Assisted-by: Claude:claude-opus-4-8 [Claude Code] Signed-off-by: Richard Palethorpe <io@richiejp.com> * feat(react-ui): add input/output spectrogram view to AudioTransform The transform page only showed time-domain amplitude waveforms, so you could see how loud a clip was but not which frequencies the model touched. Add a time x frequency spectrogram heatmap and render the input and output spectrums side by side, so it's visible which bands the enhancement attenuates (bright input bands that go dark in the output). Computed client-side via a Hann-windowed STFT over both clips (a small dependency-free radix-2 FFT), defaulting to the LocalVQE 512/256 frame geometry. This shows the net input->output spectral change; the model's internal gain mask is not exposed by the backend. - src/utils/fft.js radix-2 FFT - src/hooks/useSpectrogram.js decode + STFT -> normalised dB magnitude grid - src/components/audio/Spectrogram.jsx canvas heatmap (magma colormap) - AudioTransform.jsx dual-spectrogram panel + CSS - e2e spec + UI coverage baseline bump (38.29 -> 39.0; measured ~39.4-40.2) Assisted-by: Claude:claude-opus-4-8 [Claude Code] Signed-off-by: Richard Palethorpe <io@richiejp.com> * test(react-ui): make UI coverage deterministic, tighten the gate UI e2e line coverage swung ~1pp run-to-run (39.1% <-> 40.2%), which forced a loose 0.8pp tolerance on the monotonic gate — a band wide enough to let a real ~300-line regression through silently. The swing was a bug, not inherent jitter: the 'Create Agent navigates' spec ended on the URL assertion, so AgentCreate.jsx's ~400 lines were collected only when its render happened to beat the coverage teardown. Wait for the page to actually render (assert its heading) so those lines are covered every run. With the race gone, repeated runs land within ~0.013pp of each other, so: - tighten UI_COVERAGE_TOLERANCE 0.8 -> 0.1 (noise floor, not a drift band) - set the baseline to the real, reliably-achieved value (39.0 -> 39.86) Localised by running the V8-coverage suite repeatedly and diffing per-file line coverage; AgentCreate.jsx was the sole ~1pp flipper. Assisted-by: Claude:claude-opus-4-8 [Claude Code] Signed-off-by: Richard Palethorpe <io@richiejp.com> --------- Signed-off-by: Richard Palethorpe <io@richiejp.com>
LocalAI website
LocalAI documentation website
Requirement
In this project, the Docsy theme component is pulled in as a Hugo module, together with other module dependencies:
$ hugo mod graph
hugo: collected modules in 566 ms
hugo: collected modules in 578 ms
github.com/google/docsy-example github.com/google/docsy@v0.5.1-0.20221017155306-99eacb09ffb0
github.com/google/docsy-example github.com/google/docsy/dependencies@v0.5.1-0.20221014161617-be5da07ecff1
github.com/google/docsy/dependencies@v0.5.1-0.20221014161617-be5da07ecff1 github.com/twbs/bootstrap@v4.6.2+incompatible
github.com/google/docsy/dependencies@v0.5.1-0.20221014161617-be5da07ecff1 github.com/FortAwesome/Font-Awesome@v0.0.0-20220831210243-d3a7818c253f
If you want to do SCSS edits and want to publish these, you need to install PostCSS
npm install
Running the website locally
Building and running the site locally requires a recent extended version of Hugo.
You can find out more about how to install Hugo for your environment in our
Getting started guide.
Once you've made your working copy of the site repo, from the repo root folder, run:
hugo server
Running a container locally
You can run docsy-example inside a Docker
container, the container runs with a volume bound to the docsy-example
folder. This approach doesn't require you to install any dependencies other
than Docker Desktop on
Windows and Mac, and Docker Compose
on Linux.
-
Build the docker image
docker-compose build -
Run the built image
docker-compose upNOTE: You can run both commands at once with
docker-compose up --build. -
Verify that the service is working.
Open your web browser and type
http://localhost:1313in your navigation bar, This opens a local instance of the docsy-example homepage. You can now make changes to the docsy example and those changes will immediately show up in your browser after you save.
Cleanup
To stop Docker Compose, on your terminal window, press Ctrl + C.
To remove the produced images run:
docker-compose rm
For more information see the Docker Compose documentation.
Troubleshooting
As you run the website locally, you may run into the following error:
➜ hugo server
INFO 2021/01/21 21:07:55 Using config file:
Building sites … INFO 2021/01/21 21:07:55 syncing static files to /
Built in 288 ms
Error: Error building site: TOCSS: failed to transform "scss/main.scss" (text/x-scss): resource "scss/scss/main.scss_9fadf33d895a46083cdd64396b57ef68" not found in file cache
This error occurs if you have not installed the extended version of Hugo. See this section of the user guide for instructions on how to install Hugo.
Or you may encounter the following error:
➜ hugo server
Error: failed to download modules: binary with name "go" not found
This error occurs if you have not installed the go programming language on your system.
See this section of the user guide for instructions on how to install go.