LocalAI/docs/content/features/model-failover.md

+++ disableToc = false title = "Model Failover" weight = 15 url = "/features/model-failover/" +++

A failover chain is a model name that is served by an ordered list of other models. LocalAI sends each request to the first healthy target. When a target fails, the request moves to the next target, and later requests stay there until the first target has recovered.

Use it to serve a model from a remote LocalAI or another OpenAI-compatible provider, and to fall back to a local model when the remote one is down.

Declaring a chain

name: assistant-llm
failover:
  targets:
    - model: argus-llm          # for example a cloud-proxy model
    - model: gemma-local
      warm: true                # keep it loaded

Clients call assistant-llm. Each target is a normal model config. A chain has no backend and no parameters.model.

Optional settings, with their defaults:

failover:
  probe:
    interval: 15s     # how often an idle target is checked
    timeout: 5s
  trip:
    errors: 1         # failures within the window that mark a target down
    window: 30s
  recovery:
    probes: 3         # test requests a target must pass before it is used again
    min_dwell: 60s    # minimum time on a lower target before moving back

Rules:

• A chain needs at least 2 targets. A target can be an alias, but not another chain.
• A chain cannot also set alias or backend.
• Responses name the chain as the model. The X-LocalAI-Served-Model header names the target that served the request.
• A remote (cloud-proxy) target receives its own model name, never the chain name: proxy.upstream_model, or the target name when upstream_model is empty. The health check looks for the same name.

How the target is chosen

• The active target is the first healthy target in the list.
• When a target fails, LocalAI marks it down and moves to the next target at once.
• LocalAI moves back to a higher target only when that target has passed recovery.probes test requests and the current target has been active for at least recovery.min_dwell. This stops an unstable upstream from moving traffic back and forth.
• When all targets are down, the chain is degraded. Each request still tries every target in order.

Retry inside a request

When a target fails before the response starts, LocalAI sends the same request to the next target. The client does not see the failure.

• LocalAI does not retry after the first byte of a response is sent (for example after the first streamed token). The request fails, the target is marked down, and the next request uses the next target.
• A target that is at its concurrency limit (an admission rejection) or that is disabled is skipped for that request without being marked down.
• LocalAI does not retry client errors (4xx), such as a prompt that is too long, because the next target would reject it too. A 4xx counts neither as a success nor as a failure for the target.
• Request bodies larger than 32 MiB are not retried.

When the primary did not serve the request, the response has the header X-LocalAI-Failover: fallback, or X-LocalAI-Failover: degraded when all targets were down.

Health checks

Target	Regular check	Check before moving back
Remote (cloud-proxy)	GET /v1/models on the upstream lists the model	one small real request, for example a 1-token completion
Local, warm: true	the backend answers a health check. A check never loads the model: while it is not loaded, the check passes and real requests judge it	one small real request. While the model is not loaded, the target is used again after min_dwell
Local, not warm	none: judged only by real requests; it is never loaded only to check it	none: the target is used again after min_dwell

A request that succeeds counts as a check, so a busy target is almost never probed.

When a target is in more than one chain, its check settings come from the first of those chains in name order.

Warm targets

warm: true loads a local target at startup and protects it from idle and LRU eviction, so a switch does not wait for the model to load. Warm targets count toward the active backend limit (--max-active-backends) like any pinned model: LocalAI never evicts them to make room, and if they fill the limit, a new model still loads rather than being blocked.

warm applies only to local targets. On a remote (cloud-proxy) target it has no effect, and LocalAI logs a warning when it loads the chain.

Realtime pipelines

A pipeline stage can name a chain:

name: assistant
pipeline:
  vad: silero-vad
  transcription: whisper-chain
  llm: assistant-llm
  tts: voice-chain

LocalAI resolves the chain for every call of the stage, in full pipelines and in transcription-only and sound-detection-only sessions. When a chain switches, the session stays open and keeps its conversation. The next turn uses the new target.

The session receives a localai.model.failover event for each chain stage when it starts (reason: initial) and each time a chain switches:

{"type":"localai.model.failover","chain":"assistant-llm","stage":"llm",
 "from":"argus-llm","to":"gemma-local","state":"fallback","reason":"trip"}

Limits:

• After a session.update that changes the pipeline, localai.model.failover events keep describing the chains from session start.
• A chain used as a router candidate, or as the classifier-mode scoring model, is not resolved per call.

Watching failover

• GET /api/failover lists every chain, its active target and the state of each target.
• GET /api/failover/{chain} returns one chain.
• GET /api/failover/events is a server-sent event stream. The first event is snapshot with the full state. Then chain.switched and target.state events follow.
• Metrics: localai_failover_switches_total{chain,from,to,reason} and localai_failover_target_up{target}.
• With tracing on, each skipped target appears in the Traces view with the error that made LocalAI skip it.

Pinning a target

An admin can force a chain to one target, for example during maintenance:

curl -X POST http://localhost:8080/api/failover/assistant-llm/pin \
  -H 'Content-Type: application/json' -d '{"target":"gemma-local"}'
curl -X DELETE http://localhost:8080/api/failover/assistant-llm/pin

While a chain is pinned, only the pinned target serves it. Health checks continue. A restart removes the pin.

Assistant and MCP

The LocalAI Assistant and local-ai mcp-server offer list_failover_chains, pin_failover_target and unpin_failover_target. Create and edit chains with the model config tools, like any other model.

Limits

• Failover state is kept in memory by each LocalAI instance. Several frontends in distributed mode each keep their own view.
• Chains do not nest.
• See also [model aliases]({{%relref "features/model-aliases" %}}) and the [realtime API]({{%relref "features/openai-realtime" %}}).