diff --git a/core/resources/src/commonMain/composeResources/values/strings.xml b/core/resources/src/commonMain/composeResources/values/strings.xml index d08b073ea..7bb3a42dd 100644 --- a/core/resources/src/commonMain/composeResources/values/strings.xml +++ b/core/resources/src/commonMain/composeResources/values/strings.xml @@ -24,7 +24,6 @@ 简体中文 繁體中文 - SKH hey I found the cache, it is over here next to the big tiger. I'm kinda scared. mqtt.meshtastic.org @@ -38,7 +37,6 @@ Hide offline nodes Only show direct nodes You are viewing ignored nodes,\nPress to return to the node list. - Show details Sort by Node sorting options A-Z @@ -78,44 +76,25 @@ Bad session key Public Key unauthorized PKI send failed, no public key - Client App connected or standalone messaging device. - Client Mute Device that does not forward packets from other devices. - Client Base Treats packets from or to favorited nodes as ROUTER_LATE, and all other packets as CLIENT. - Router Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. - Router Client Combination of both ROUTER and CLIENT. Not for mobile devices. - Repeater Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. - Tracker Broadcasts GPS position packets as priority. - Sensor Broadcasts telemetry packets as priority. - TAK Optimized for ATAK system communication, reduces routine broadcasts. - Client Hidden Device that only broadcasts as needed for stealth or power savings. - Lost and Found Broadcasts location as message to default channel regularly for to assist with device recovery. - TAK Tracker Enables automatic TAK PLI broadcasts and reduces routine broadcasts. - Router Late Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - All Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. - All Skip Decoding Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. - Local Only Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Known Only Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node's known list. - None Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. - Core Portnums Only Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. Treat double tap on supported accelerometers as a user button press. @@ -194,7 +173,6 @@ QR code Unknown Username Send - You haven't yet paired a Meshtastic compatible radio with this phone. Please pair a device and set your username.\n\nThis open-source application is in development, if you find problems please post on our forum: https://github.com/orgs/meshtastic/discussions.\n\nFor more information see our web page - www.meshtastic.org. You Allow analytics and crash reporting. Accept @@ -202,23 +180,15 @@ Discard Save New Channel URL received - Meshtastic needs location permissions enabled to find new devices via Bluetooth. You can disable when not in use. - Report Bug - Report a bug - Are you sure you want to report a bug? After reporting, please post in https://github.com/orgs/meshtastic/discussions so we can match up the report with what you found. Report - Pairing completed, starting service - Pairing failed, please select again Location access is turned off, can not provide position to mesh. Share New Node Seen: %1$s Disconnected Device sleeping - Connected: %1$s online IP Address: Port: Connected - Connected to radio (%1$s) Current connections: Wifi IP: Ethernet IP: @@ -240,14 +210,11 @@ Meshtastic is built with the following open source libraries. Tap any library to view its license. %1$d libraries This Channel URL is invalid and can not be used - This contact is invalid and can not be added Debug Panel Decoded Payload: Export Logs - Export canceled %1$d logs exported Failed to write log file: %1$s - No logs to export %1$d hour @@ -269,7 +236,6 @@ Clear all filters Add custom filter Preset Filters - Only show ignored Nodes Store mesh logs Disable to skip writing mesh logs to disk Clear Logs @@ -340,9 +306,7 @@ Shutdown Shutdown not supported on this device ⚠️ This will SHUTDOWN the node. Physical interaction will be required to turn it back on. - ⚠️ This is a critical infrastructure node. Type the node name to confirm: Node: %1$s - Type: %1$s Reboot Traceroute Show Introduction @@ -354,9 +318,7 @@ Instantly send Show quick chat menu Hide quick chat menu - Show quick chat Factory reset - Bluetooth is disabled. Please enable it in your device settings. Open settings Firmware version: %1$s Meshtastic needs "Nearby devices" permissions enabled to find and connect to devices via Bluetooth. You can disable when not in use. @@ -399,7 +361,6 @@ Remove This node will be removed from your list until your node receives data from it again. Mute notifications - 1 hour 8 hours 1 week Always @@ -408,7 +369,6 @@ Not muted Muted for %1$d days, %2$s hours Muted for %1$s hours - Mute status Mute notifications for '%1$s'? Unmute notifications for '%1$s'? Replace @@ -428,7 +388,6 @@ Soil Moist Logs Hops Away - Hops Away: %1$d Information Utilization for the current channel, including well formed TX, RX and malformed RX (aka noise). Percent of airtime for transmission used within the last hour. @@ -442,7 +401,6 @@ The public key does not match the recorded key. You may remove the node and let it exchange keys again, but this may indicate a more security problem. Contact the user through another trusted channel, to determine if the key change was due to a factory reset or other intentional action. User Info New node notifications - More details SNR Signal-to-Noise Ratio, a measure used in communications to quantify the level of a desired signal to the level of background noise. In Meshtastic and other wireless systems, a higher SNR indicates a clearer signal that can enhance the reliability and quality of data transmission. RSSI @@ -476,7 +434,6 @@ This traceroute does not have any mappable nodes yet. Showing %1$d/%2$d nodes Duration: %1$s s - %1$s - %2$s Route traced toward destination:\n\n Route traced back to us:\n\n Forward Hops @@ -492,10 +449,8 @@ Available system memory in bytes 1H 24H - 48H 1W 2W - 4W 1M Max Min @@ -531,8 +486,6 @@ Low battery notifications (favorite nodes) Baro Enabled - UDP Broadcast - UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]>
Toggle my position Orient north @@ -611,11 +564,9 @@ State broadcast (seconds) Send bell with alert message Friendly name - Friendly address GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Device Role Button GPIO Buzzer GPIO @@ -665,7 +616,6 @@ Bandwidth Spread Factor Coding Rate - Frequency offset (MHz) Region Number of Hops Transmit Enabled @@ -694,13 +644,11 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network WiFi Options Enabled WiFi enabled SSID PSK - Get Document Ethernet Options Ethernet enabled NTP server @@ -717,31 +665,18 @@ The actual status string WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position - Position broadcast interval (seconds) - Smart position enabled - Smart broadcast minimum distance (meters) - Smart broadcast minimum interval (seconds) - Use fixed position Latitude Longitude - Altitude (meters) Set from current phone location GPS Mode (Physical Hardware) - GPS update interval (seconds) - Redefine GPS_RX_PIN - Redefine GPS_TX_PIN - Redefine PIN_GPS_EN Position Flags Power Config Enable power saving mode Shutdown on power loss - Shutdown on battery delay (seconds) ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration Super deep sleep duration - Light sleep duration Minimum wake time Battery INA_2XX I2C address Range Test Config @@ -752,7 +687,6 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Direct Message Key Admin Keys Public Key @@ -808,8 +742,6 @@ Wind Dir Rain (1h) Rain (24h) - IR Lux - White Lux Weight Radiation @@ -824,8 +756,6 @@ User ID Uptime Load %1$d - Fetching Channel %1$d/%2$d - Fetching %1$s Disk Free %1$d Timestamp Heading @@ -843,7 +773,6 @@ Press and drag to reorder Unmute Dynamic - Scan QR Code Share Contact Notes Add a private note… @@ -856,13 +785,11 @@ Request Requesting %1$s from %2$s User info - NeighborInfo (2.7.15+) Request Telemetry Device Metrics Environment Metrics Air-Quality Metrics Power Metrics - Local Stats Host Metrics Pax Metrics Metadata @@ -873,7 +800,6 @@ Host Metrics Host Free Memory - Disk Free Load User String Navigate Into @@ -916,8 +842,6 @@ (%1$d online / %2$d shown / %3$d total) React Disconnect - No Network devices found. - No USB Serial devices found. Scroll to bottom Meshtastic Security Status @@ -934,8 +858,6 @@ Clean Node Database Clean up nodes last seen older than %1$d days Clean up only unknown nodes - Clean up nodes with low/no interaction - Clean up ignored nodes Clean Now This will remove %1$d nodes from your database. This action cannot be undone. @@ -959,11 +881,6 @@ Show All Meanings Show Current Status Dismiss - - Are you sure you want to delete this node? - Forget connection - Are you sure you want to forget this connection? - Replying to %1$s Cancel reply Delete Messages? @@ -975,7 +892,6 @@ No PAX metrics available. Wi-Fi Provisioning for mPWRD-OS Bluetooth Devices - Paired devices Connected Device Rate Limit Exceeded. Please try again later. @@ -1005,7 +921,6 @@ Notifications for newly discovered nodes. Low Battery Notifications for low battery alerts for the connected device. - Select packets sent as critical will ignore the msg switch and Do Not Disturb settings in the OS notification center. Configure notification permissions Phone Location Meshtastic uses your phone's location to enable a number of features. You can update your location permissions at any time from settings. @@ -1028,19 +943,15 @@ Configure Critical Alerts Meshtastic uses notifications to keep you updated on new messages and other important events. You can update your notification permissions at any time from settings. Next - Grant Permissions %1$d nodes queued for deletion: Caution: This removes nodes from in-app and on-device databases.\nSelections are additive. - Connecting to device Normal Satellite Terrain Hybrid Manage Map Layers Map layers support .kml, .kmz, or GeoJSON formats. - Map Layers No map layers loaded. - Add Layer Hide Layer Show Layer Remove Layer @@ -1079,11 +990,8 @@ 48 Hours Filter by Last Heard time: %1$s %1$d dBm - No application available to handle link. System Settings No Stats Available - - Analytics are collected to help us improve the Android app (thank you), we will receive anonymized information about user behavior. This includes crash reports, screens used in the app, etc. Analytics platforms: Firebase: https://firebase.google.com/ @@ -1091,7 +999,6 @@ For more information, see our privacy policy. https://meshtastic.org/docs/legal/privacy/ Unset - 0 - Relayed by: %1$s Heard %1$d relay Heard %1$d relays @@ -1102,7 +1009,6 @@ For RAK WisBlock RAK4631, use the vendor's serial DFU tool (for example, adafruit-nrfutil dfu serial with the provided bootloader .zip file). Copying the .uf2 file alone will not update the bootloader. Don't show again for this device Preserve Favorites? - USB Devices Firmware Update @@ -1119,16 +1025,12 @@ Update Successful! Done Starting DFU... - Updating... %1$s Enabling DFU mode... Validating firmware... - Disconnecting... Unknown hardware model: %1$d - Connected device is not a valid BLE device or address is unknown (%1$s). No device connected Could not find firmware for %1$s in release. Extracting firmware... - Disconnecting to start DFU service... Update failed Hang tight, we are working on it... Keep your device close to your phone. @@ -1144,7 +1046,6 @@ Chirpy says, "Keep your ladder handy!" Chirpy Rebooting to DFU... - Waiting for DFU device... High-five! Wait, copying firmware... Please save the .uf2 file to your device's DFU drive. Flashing device, please wait... @@ -1160,26 +1061,16 @@ Target: %1$s Release Notes Unknown error - Local update failed - DFU Error: %1$s - DFU Aborted Node user information is missing. Battery too low (%1$d%). Please charge your device before updating. Could not retrieve firmware file. - Nordic DFU Update failed USB Update failed Firmware hash rejected. Device may require hash provisioning or bootloader update. OTA update failed: %1$s - Loading firmware... Waiting for device to reboot into OTA mode... Connecting to device (attempt %1$d/%2$d)... - Checking device version... Starting OTA update... Uploading firmware... - Uploading firmware... %1$d% (%2$s) - Rebooting device... - Firmware Update - Firmware update status Erasing... Back @@ -1212,9 +1103,7 @@ Estimated area: unknown accuracy Mark as read Now - Add Channels The following channels were found in the QR code. Select the once you would like to add to your device. Existing channels will be preserved. - Replace Channels & Settings This QR code contains a complete configuration. This will REPLACE your existing channels and radio settings. All existing channels will be removed. Loading @@ -1228,7 +1117,6 @@ No filter words configured Regex pattern Whole word match - %1$d filtered Show %1$d filtered Hide %1$d filtered Filtered @@ -1250,16 +1138,10 @@ Bluetooth Configure Bluetooth Permissions - Connect to Radio - Scan for and connect to your Meshtastic mesh radio device. Discovery Find and identify Meshtastic devices near you. Configuration Wirelessly manage your device settings and channels. - - Permission granted - Permission denied - Map style selection Battery: %1$d% @@ -1276,20 +1158,15 @@ %1$d / %2$d %1$s Powered - Meshtastic Stats Refresh Updated Add Network Layer https://example.com/map.kml or .geojson - Refresh Layer Local MBTiles File Add Local MBTiles File - Invalid name, URL template, or local URI for custom tile provider. - A custom tile provider with this name already exists. - Failed to copy MBTiles file to internal storage. TAK (ATAK) TAK Configuration @@ -1340,17 +1217,7 @@ Local-only Telemetry (Relays) Local-only Position (Relays) Preserve Router Hops - No messages yet - %1$d unread - Map support is coming soon to Desktop - No device connected - Update Status - Ready for firmware update - Check for Updates - Download Firmware - Update Device Note - Ensure your device is fully charged before starting a firmware update. Do not disconnect or power off the device during the update process. Device Storage & UI (Read-Only) Theme: %1$s, Language: %2$s @@ -1369,13 +1236,9 @@ Scan for Networks Scanning… Applying WiFi configuration… - WiFi configured successfully! - WiFi credentials applied. The device will connect to the network shortly. No networks found - Make sure the device is powered on and within range. Could not connect: %1$s Failed to scan for WiFi networks: %1$s - Refresh %1$d% Available Networks Network Name (SSID)