Lefucjusz
561e4e7a0d
[MOS-599] Fix undefined phone mode in simulator
...
Fix of the issue that on simulator phone mode
was in 'undefined' state, what resulted in
no phone mode selected in settings.
2023-06-29 10:50:25 +02:00
Maciej Gibowicz
30789d3d9c
[EGD-8191] Magnetometer deinitialisation
...
We stop reading from the magnetometer
during the system shutdown procedure
2022-01-28 14:03:42 +01:00
Bartosz Cichocki
ba0e0345b7
[EGD-6868] Restore magnetometer polling mode
...
To be able to properly operate with the slider under every
circumstance the polling mode has to be restored. It's related
to the bug in the magnetometer chip, which is not described in the
datasheet.
This reverts commit 744eef1d9b
2021-05-31 16:48:54 +02:00
Bartosz Cichocki
c80e8250d4
[EGD-6545] Enable magnetometer LPDCM mode
...
To be able to reduce the power usage of the phone, magnetometer
has been switched into interrupt driven LPDCM mode. Added some
fixups maintaining current behavior on startup and disabling
the tethering mode
2021-04-22 10:38:43 +02:00
Bartosz Cichocki
5fb105d0b1
[EGD-6214] Add slider position reading after disabling tethering
...
To be able to set proper phone mode changed by the slider during
tethering, the forced readout of slider position has been added
2021-04-08 15:48:25 +02:00
Mateusz Grzywacz
70a4b21c33
[EGD-3045] Magnetometer driver ( #788 )
...
* [EGD-3045] magnetometer driver - timer polling approach
- magneto pin mux
- magneto reg structs
- magneto irq skeleton
- bluetooth irq handler moved
- dedicated i2c methods
- bitfields parsed and populated explicitly
* [misc] big endian ↔ long conversion in Utils + UT
2020-10-22 15:41:54 +02:00
Radoslaw Wicik
2276ceed67
[EGD-3743] Update copyrights in fies
2020-10-20 12:55:10 +02:00
kkleczkowski
b70ad6c5fc
Egd 3196 small cellular refactor ( #365 )
...
* [EGD-3196] Fixed fatals in cellular.
* [EGD-3196] Fixed sms sending.
* [EGD-3196] Fixed timeout in ConfProcedure.
* [EGD-3196] Board type moved to Event Manager.
* [EGD-3196] Event Manager API renamed.
* [EGD-3196] Misiing files.
* [EGD-3196] Fixed modem status message, return code in magnetometer driver, case in modem init procedure.
* [EGD-3196] PR suggestions applied.
* [EGD-3196] Style fix.
* [EGD-3196} GetBoardName -> c_str();
* [EGD-3196] Style fix.
* [EGD-3196] PR suggestions added.
* [EGD-3196] Style fix...
* [EGD-3196] Style fix again.
Co-authored-by: Kuba Kleczkowski <dd>
2020-05-21 16:56:24 +02:00
Kuba Kleczkowski
6ebae24abd
[EGD-2911-modem-init-rework] modem init fixes (cold start) & missing Linux files/implementation
2020-05-11 14:04:31 +02:00
