Improve structure of the module sys. Problems within this module
prevents from linking others.
Signed-off-by: Marcin Smoczyński <smoczynski.marcin@gmail.com>
Split module-utils into smaller components for better dependency
management. Fix many dependencies throughout the project.
Signed-off-by: Marcin Smoczyński <smoczynski.marcin@gmail.com>
We have no controll on UART over the device flushing, minimum code
added to assure that data could be flushed
We do not close services when these are closed with reason
While the USB cable is connected, the battery charging works,
so in this case energy saving is not critical
and for a more stable transmission, we block decreasing
the CPU frequency below 132 MHz.
USBConfigured event is not fired when powerbank, charger is connected.
[EGD-5204] Show passcode screen only when PC is connected
USBConfigured event is not fired when powerbank, charger is connected.
Handling queues with static std::string implementation caused
problem of double-free memory on turning off simulator. Applied
solution to the problem is to pass ownership of queued string to
a receiver side.
* allow workers to run independently from service
* change worker to use FreeRTOS wrapper Queue class instead of
freeRTOS native queues
* fix bug disallowing to destruct worker that have never ran
* fixed worker bad state transition to Running state
Due to vfs deprecation there is need to remove all vfs calls from code. This PR covers module services. It also contains minor fixes in module-services.
* [EGD-3688] Relax retries count for send
enable ServiceDesktop
* [EGD-3688] Relax retries count for send
enable ServiceDesktop
* [EGD-4318] enable service desktop and USB communication
CDC for serial port (communication with Mudita Center)
MTP for file transfer
* [EGD-4318] include path fix
* [egd-4318] constexpr brought back
* [EGD-4318]: review changes
- all BSP specific code moved to bsp files
- added a device listener class for USB
- simplified WorkerDesktop
* [EGD-4318] more reivew fixes mostly include paths and enums
* [EGD-4319] review fixes for SP2FET
* [EGD-4318] updates for large messages sent from phone
* [EGD-4318] more review fixes
- error checks on linux (ptms open and ptsname)
- removed all vfs
- service-desktop won't start if worker init fails
* [EGD-4318] updated return values for usbInit
* Update module-services/service-desktop/WorkerDesktop.cpp
Co-authored-by: Piotr Tanski <piotr.tanski@mudita.com>
* Update module-services/service-desktop/endpoints/update/UpdateMuditaOS.hpp
Co-authored-by: Piotr Tanski <piotr.tanski@mudita.com>
* [EGD-4318] review fixes
- removed #define
- return values for usbInit
* Update module-bsp/board/linux/usb_cdc/usb_cdc.cpp
Co-authored-by: Piotr Tanski <piotr.tanski@mudita.com>
* [EGD-4318] updated taglib
* [EGD-4318] style fixes
* Update module-bsp/board/linux/usb_cdc/usb_cdc.cpp
Co-authored-by: Alek Rudnik <54846206+alekrudnik@users.noreply.github.com>
* [EGD-4318] switches from freertos Timer class to sys::Timer
* Update module-services/service-desktop/WorkerDesktop.cpp
Co-authored-by: Piotr Tanski <piotr.tanski@mudita.com>
* Update module-services/service-desktop/WorkerDesktop.cpp
Co-authored-by: Piotr Tanski <piotr.tanski@mudita.com>
* [EGD-4318] added mutex/lock during raw data transfers
* [EGD-4318] if the TAR file is zero size or invalid
mtar_close causes HF. This is a workaround
* [EGD-4318] timer should not start on constructor
* [EGD-4318] getRawMode is const noecept
Co-authored-by: unknown <atom@prostate.local>
Co-authored-by: Piotr Tanski <piotr.tanski@mudita.com>
Co-authored-by: Alek Rudnik <54846206+alekrudnik@users.noreply.github.com>
* [EGD-3688] usb stack as an external module
removed old usb code
* [EGD-3688] linux fix
* [EGD-3688] fixes for new USB code
* [EGD-3688] updated submodule
- endpoints split to files
- implemneted device info
- battery made obsolete should be deleted
- storage endpoint might not be neededm, for
debug purposes only
- update not implemented
- sys::Service * is passed to endpoints
- added uuid as part of the core protocol
- body of the message is made available to endpoints
* [EGD-2306] DESKTOP application initial commit
most of this code is foreign and unverified
it's low level magic numbers for the platform
on Linux i used PTY to simulate a serial line
* [EGD-2306] Add contact-list and contact-count commands
* [EGD-2306] Add command for geting contact by id and minor fixes
* [EGD-2856][WIP] Add basic serial parser
* [EGD-2855] Set usb device config buffer property cacheable
* [EGD-2856] Separate handlers from fsms, add status codes
* [EGD-2855] fd passed to state machine for linux renderer support
* [EGD-2856] Fix warnings
* [EGD-2855] New send task added and buffer queque
* [EGD-2856] Add simple ServiceDesktop documentation
* [EGD-2855] rt1051 worker refactor
* [EGD-2855] Added service workers for desktop app.
Changed linux USB driver mock up.
Added queue name mapping for service workers.
Added queue registry support (maybe redundant with mapping)
* [EGD-2855] Added proper message pointer to queue send and memory free
Added bsp driver namespace for linux and rt1051
* [EGD-2856] Major cleanup
* [EGD-2856] Fix typo
* [EGD-2856] Fix warnings
* [EGD-2856] Delete recursive fsm calling to prevent stack overflow
* [EGD-2856] Reduce http codes
* [EGD-2856] Rename serial parser to parser
* [EGD-2855] USB_CDC drives renames and cleanups
Service Worker queue cleanups
* [EGD-2855] Service Worker queue cleanups
* [EGD2855] Fixed external driver import
* [EGD-2856] Remove redundant message type
* [EGD-2856] Switch on enums instead of ints, and other minor changes requested after code review
* [EGD-2855] usb driver moved to bsp directory structure, pull request fixes
* [EGD-2855] clang #include fix
* [EGD-2856] Add tinyfsm as git submodule, update readme and minor fix
Co-authored-by: rkubiak01 <56821808+rkubiak01@users.noreply.github.com>
Co-authored-by: PrzeBrudny <60609703+PrzeBrudny@users.noreply.github.com>
