diff --git a/DetectionManager.cpp b/DetectionManager.cpp index 8898cee1c..e7b2777e6 100644 --- a/DetectionManager.cpp +++ b/DetectionManager.cpp @@ -45,33 +45,33 @@ const char* DETECTIONMANAGER = "DetectionManager"; /*---------------------------------------------------------*\ | Warning Dialog Strings | \*---------------------------------------------------------*/ -const char* I2C_ERR_WIN = QT_TRANSLATE_NOOP("DetectionManager", - "

Warning:

" - "

One or more I2C/SMBus interfaces failed to initialize.

" - "

Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.

" - "

On Windows, this is usually caused by a failure to load the PawnIO driver.

" - "

For OpenRGB to access these devices, you must install PawnIO from https://pawnio.eu and run OpenRGB as administrator or as a system service.

" - "

If you are not using any of the devices listed above, you can safely ignore this message.

"); -const char* I2C_ERR_LINUX = QT_TRANSLATE_NOOP("DetectionManager", - "

Warning:

" - "

One or more I2C/SMBus interfaces failed to initialize.

" - "

Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.

" - "

On Linux, this is usually because the i2c-dev module is not loaded.

" - "

For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. " - "This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.

" - "

If you are not using any of the devices listed above, you can safely ignore this message.

"); +static const char* I2C_ERR_WIN = QT_TRANSLATE_NOOP("DetectionManager", + "

Warning:

" + "

One or more I2C/SMBus interfaces failed to initialize.

" + "

Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.

" + "

On Windows, this is usually caused by a failure to load the PawnIO driver.

" + "

For OpenRGB to access these devices, you must install PawnIO from https://pawnio.eu and run OpenRGB as administrator or as a system service.

" + "

If you are not using any of the devices listed above, you can safely ignore this message.

"); +static const char* I2C_ERR_LINUX = QT_TRANSLATE_NOOP("DetectionManager", + "

Warning:

" + "

One or more I2C/SMBus interfaces failed to initialize.

" + "

Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.

" + "

On Linux, this is usually because the i2c-dev module is not loaded.

" + "

For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. " + "This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.

" + "

If you are not using any of the devices listed above, you can safely ignore this message.

"); -const char* UDEV_MISSING = QT_TRANSLATE_NOOP("DetectionManager", - "

Warning:

" - "

The OpenRGB udev rules are not installed.

" - "

Most devices will not be available unless running OpenRGB as root.

" - "

If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually

" - "

See https://openrgb.org/udev to install the udev rules manually

"); -const char* UDEV_MUTLI = QT_TRANSLATE_NOOP("DetectionManager", - "

Warning:

" - "

Multiple OpenRGB udev rules are installed.

" - "

The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.

" - "

Multiple udev rules files can conflict, it is recommended to remove one of them.

"); +static const char* UDEV_MISSING = QT_TRANSLATE_NOOP("DetectionManager", + "

Warning:

" + "

The OpenRGB udev rules are not installed.

" + "

Most devices will not be available unless running OpenRGB as as a system service or as root.

" + "

If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually

" + "

See https://openrgb.org/udev to install the udev rules manually

"); +static const char* UDEV_MUTLI = QT_TRANSLATE_NOOP("DetectionManager", + "

Warning:

" + "

Multiple OpenRGB udev rules are installed.

" + "

The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.

" + "

Multiple udev rules files can conflict, it is recommended to remove one of them.

"); /*---------------------------------------------------------*\ | Default hidapi wrappter that just uses default hidapi | diff --git a/qt/i18n/OpenRGB_be_BY.ts b/qt/i18n/OpenRGB_be_BY.ts index e9565c343..21828f846 100644 --- a/qt/i18n/OpenRGB_be_BY.ts +++ b/qt/i18n/OpenRGB_be_BY.ts @@ -92,7 +92,7 @@ Порт: - + No serial ports found Не знайдзены пасылкавыя порты @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Некаторыя ўнутраныя прылады могуць не быць выяўлены:</h2><p>Адзін або больш інтэрфейсаў I2C або SMBus не ўдалося ініцыялізаваць.</p><p><b>Модулі RGB DRAM, некаторыя ўнутраныя RGB-святлонасілкі матэрынальных плоскіх панэляў і RGB-відкавыя карты не будуць даступныя ў OpenRGB</b> без I2C або SMBus.</p><h4>Як гэта поціраць:</h4><p>На Windows гэта часта выклікаецца няўдалым завантажэннем драйвера PawnIO.</p><p>Перш за ўсё трэба усталяваць <a href='https://pawnio.eu/'>PawnIO</a>, пасля чаго трэба запусціць OpenRGB ад імя адміністратара, каб даступнаць гэтыя прылады.</p><p>Бачце <a href='https://help.openrgb.org/'>help.openrgb.org</a> для дадатковых крокоў дыягнастыкі, калі вы цяпер што-небудзь бачыце гэтае павішэнне.<br></p><h3>Калі вы не выкарыстоўваеце ўнутраны RGB на сталянкавым камп'ютары, гэтае павішэнне не важна для вас.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Частка ўбудаванага абсталявання магла быць не вызначана:</h2><p>Не ўдалося ініцыялізаваць адзін або некалькі інтэрфейсаў I2C або SMBus.</p><p><b>Модулі RGB DRAM, убудаваная RGB-падсветка некаторых мацярынскіх плат і відэакарт не будуць даступныя ў OpenRGB</b> без доступу да інтэрфейсаў I2C або SMBus.</p><h4>Як выправіць гэтую праблему:</h4><p>На Linux гэта звычайна адбываецца таму, што модуль i2c-dev не загружаны.</p><p>Вам трэба загрузіць модуль i2c-dev разам з правільным драйверам i2c, які адпавядае вашай мацярынскай плаце. Для сістэм AMD гэта звычайна i2c-piix4, а для сістэм Intel – i2c-i801.</p><p>Калі вы працягваеце бачыць гэтае паведамленне - глядзіце старонку <a href='https://help.openrgb.org/'>help.openrgb.org</a> для атрымання дадатковых звестак па выяўленню і ўстараненню праблемы.<br></p><h3>Калі вы не выкарыстоўваеце ўбудаваную RGB-падсветку на настольным камп’ютары, гэтае паведамленне можна праігнараваць.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>ПАПЯРЭДЖАННЕ:</h2><p>Правілы OpenRGB udev не ўсталяваны.</p><p>Большасць прылад не будуць даступныя, хіба што OpenRGB не будзе выконвацца як root.</p><p>Калі OpenRGB усталяваны як AppImage, Flatpak або скампіляваны з зыходнага кода, вам трэба ўсталяваць правілы udev уручную.</p><p>Кіраўніцтва па усталяванню правілаў udev: <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a></p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ПАПЯРЭДЖАННЕ:</h2><p>Усталявана некалькі правілаў OpenRGB udev.</p><p>Файл правілаў udev 60-openrgb.rules усталяваны у /etc/udev/rules.d, так і ў /usr/lib/udev/rules.d.</p><p>Некалькі файлаў правілаў udev могуць канфліктаваць паміж сабой, рэкамендуецца выдаліць адзін з іх.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Попереджэнне:</h2><p>Адзін або больш інтэрфейсаў I2C/SMBus не ўдалося ініцыялізаваць.</p><p>Залежна ад таго, якія інтэрфейсы не ўдалося ініцыялізаваць, некаторыя модулі RGB DRAM, некаторыя ўбудаваныя RGB-святло матраўнікаў і RGB-відкавыя карты могуць не быць даступныя ў OpenRGB.</p><p>На Windows гэта часта выклікаецца няўдалым завантажэннем драйвера PawnIO.</p><p>Каб OpenRGB магло даступнаць да гэтых прылад, вы павінны усталяваць PawnIO з <a href='https://pawnio.eu/'>https://pawnio.eu</a> і запусціць OpenRGB адміністратарам або як сістэмны працэс.</p><p>Калі вы не выкарыстоўваеце ні адзін з пералічаных вышэй прылад, вы можаце без праблем ігнараваць гэта павішэнне.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Пуправа:</h2><p>Адзін або больш інтэрфейсаў I2C/SMBus не ўдалося ініцыялізаваць.</p><p>Залежна ад таго, якія інтэрфейсы не ўдалося ініцыялізаваць, некаторыя модулі RGB DRAM, некаторыя ўнутраныя RGB-святло матэрынаўых платаў, і RGB-відкавыя карты могуць не быць даступныя ў OpenRGB.</p><p>На Linux гэта часта з-за таго, што модуль i2c-dev не заładжаны.</p><p>Каб OpenRGB магло дастыпаць да гэтых прыстасаванняў, вы павінны заładжаны модуль i2c-dev разам з правільным модулем драйвера I2C для вашай матэрынальнай платы. Гэта часта i2c-piix4 для сістэм AMD і i2c-i801 для сістэм Intel.</p><p>Калі вы не выкарыстоўваеце ні адно з пералічаных прыстасаванняў, вы можаце без праблем ігнараваць гэта павішэнне.</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Пуправа:</h2><p>Правілы udev для OpenRGB не ўсталяваны.</p><p>Большасць прылад не будзе даступна, якшо не запускаць OpenRGB як root.</p><p>Калі вы выкарыстоўваеце AppImage, Flatpak або самастойна скампіляваныя версіі OpenRGB, вы павінны ўсталяваць правілы udev самастойна.</p><p>Дзяўце <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>, каб усталяваць правілы udev самастойна.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Пуправа:</h2><p>Правіла udev для OpenRGB не ўсталяваны.</p><p>Большінства прылад не будуць даступныя, якшо не запускаць OpenRGB як сістэмны сэрвіс або як root.</p><p>Калі вы выкарыстоўваеце AppImage, Flatpak або самастойна скампіляваныя версіі OpenRGB, вы павінны ўсталяваць правілы udev самастойна.</p><p>Бачце <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>, каб усталяваць правілы udev самастойна.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Пуправінне:</h2><p>Усталоўлена некалькі правіл OpenRGB udev.</p><p>Файл правіл udev 60-openrgb.rules усталоўваны ў і /etc/udev/rules.d і /usr/lib/udev/rules.d.</p><p>Некалькі файлоў правіл udev могуць узаемадзеянне, таму рэкамендуецца выдаліць адзін з іх.</p> @@ -363,7 +347,7 @@ QMK (пратакал VialRGB) - + Serial Device Паслядоўны прылада @@ -499,60 +483,19 @@ Захаваць злучэнне - + Rescan Devices Перасканаваць прылады - + Disconnect Адлучыць - - - OpenRGBDMXSettingsEntry - Brightness Channel: - Канал яркасці: - - - Blue Channel: - Канал сіняга: - - - Name: - Назва: - - - Green Channel: - Канал зялёнага: - - - Red Channel: - Канал чырвонага: - - - Keepalive Time: - Час падтр. актыўнасці: - - - Port: - Порт: - - - - OpenRGBDMXSettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Save - Захаваць + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB працуе ў лакальным рэжыме кліента. Лакальны злучэнне можа не разлучыцца. @@ -564,44 +507,64 @@ + Device Configuration + Наладка прылады + + + + Device Name: + Назва прылады: + + + Device-Specific Configuration Канфігурацыя, спецыфічная для прылады + + + Reset Device Configuration + Скінуць наладку прылады + OpenRGBDeviceInfoPage - + Name: Назва: - + Vendor: Вытворца: - + Type: Тып: - + + Display Name: + Паказаць назву: + + + Description: Апісанне: - + Version: Версія: - + Location: Размяшчэнне: - + Serial: Серыйны нумар: @@ -699,7 +662,7 @@ V: - + Edit Zone Рэдагаваць зону @@ -720,7 +683,7 @@ - + Save To Device Захаваць на прыладзе @@ -735,113 +698,133 @@ Рэдагаваць - + Set individual LEDs to static colors. Safe for use with software-driven effects. Задае статычны колер для асобных святлодыёдаў. Бяспечны для выкарыстання з праграмнымі эфектамі. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Задае статычны колер для асобных святлодыёдаў. Небяспечны для выкарыстання з праграмнымі эфектамі. - + Sets the entire device or a zone to a single color. Задае адзіны колер для ўсёй прылады або зоны. - + Gradually fades between fully off and fully on. Паступова змяняецца паміж поўнасцю ўкл. і поўнасцю выкл. - + Abruptly changes between fully off and fully on. Рэзка змяняецца паміж поўнасцю ўкл. і поўнасцю выкл. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Паступова перабірае ўвесь каляровы спектр. Усе святлодыёды прылады аднолькавага колеру. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Паступова перабірае ўвесь каляровы спектр. Стварае вясёлкавы ўзор, які рухаецца. - + Flashes lights when keys or buttons are pressed. Мігае святлодыёдамі пры націсканні клавіш або кнопак. - - + + Entire Device Уся прылада - + Edit Device - + Рэдагаваць прыладу - + Entire Zone Уся зона - + Left Налева - + Right Направа - + Up Уверх - + Down Уніз - + Horizontal Гарызантальна - + Vertical Вертыкальна - + + Up-Left + Уверх-леваю + + + + Up-Right + Права-верх + + + + Down-Left + Ніжэй-леваю + + + + Down-Right + Ніжні-Правы + + + Saved To Device Захавана на прыладзе - + Saving Not Supported Захаванне не падтрымліваецца - + All Zones Усе зоны - + Mode Specific Вызначана рэжымам - + Entire Segment Увесь сегмент @@ -880,7 +863,8 @@ - + + Rescan Devices Перасканаваць прылады @@ -893,14 +877,10 @@ - + Delete Profile Выдаліць профіль - - Load Profile - Загрузіць профіль - OpenRGB is detecting devices... @@ -922,167 +902,127 @@ Захаваць профіль з адмысловай назвай - + + Show/Hide Паказаць/схаваць - + + Profiles Профілі - + + Quick Colors Хуткі выбар колераў - + + Red Чырвоны - + + Yellow Жоўты - + + Green Зялёны - + + Cyan Бірузовы - + + Blue Сіні - + + Magenta Маджэнта - + + White Белы - + + Lights Off Выключыць усе - + + Exit Выхад - + Plugins Убудовы - + About OpenRGB Пра OpenRGB - + General Settings Агульныя налады - + Manually Added Devices Уручна даданы прылады - DMX Devices - Прылады DMX - - - E1.31 Devices - Прылады E1.31 - - - Kasa Smart Devices - Прылады Kasa Smart - - - Philips Hue Devices - Прылады Philips Hue - - - Philips Wiz Devices - Прылады Philips Wiz - - - OpenRGB QMK Protocol - Пратакол OpenRGB QMK - - - Serial Devices - Прылады паслядоўнага порта (Serial) - - - Yeelight Devices - Прылады Yeelight - - - + SMBus Tools Інструменты SMBus - + SDK Client SDK кліент - + SDK Server SDK сервер - + Do you really want to delete this profile? Вы сапраўды хочаце выдаліць гэты профіль? - + Log Console Кансоль журнала - LIFX Devices - Прылады LIFX - - - Nanoleaf Devices - Прылады Nanoleaf - - - Elgato KeyLight Devices - Прылады Elgato KeyLight - - - Elgato LightStrip Devices - Прылады Elgato LightStrip - - - + Supported Devices Прылады што падтрымліваюцца - - Software - Звесткі аб ПЗ - OpenRGBDynamicSettingsWidget @@ -1097,161 +1037,6 @@ Прадвызначана сістэмай - - OpenRGBE131SettingsEntry - - Start Channel: - Пачатковы канал: - - - Number of LEDs: - Колькасць святлодыёдаў: - - - Start Universe: - Пачатковая Universe: - - - Name: - Назва: - - - Matrix Order: - Парадак матрыцы: - - - Matrix Height: - Вышыня матрыцы: - - - Matrix Width: - Шырыня матрыцы: - - - Type: - Тып: - - - IP (Unicast): - IP (аднаадрасны): - - - Universe Size: - Памер Universe: - - - Keepalive Time: - Час падтр. актыўнасці: - - - RGB Order: - Парадак RGB: - - - Single - Адзіночная зона - - - Linear - Аднамерная зона - - - Matrix - Матрыца - - - Horizontal Top Left - Гарызантальна → ↓ - - - Horizontal Top Right - Гарызантальна ← ↓ - - - Horizontal Bottom Left - Гарызантальна → ↑ - - - Horizontal Bottom Right - Гарызантальна ← ↑ - - - Vertical Top Left - Вертыкальна ↓ → - - - Vertical Top Right - Вертыкальна ↓ ← - - - Vertical Bottom Left - Вертыкальна ↑ → - - - Vertical Bottom Right - Вертыкальна ↑ ← - - - - OpenRGBE131SettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Save - Захаваць - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Save - Захаваць - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Save - Захаваць - - - - OpenRGBGoveeSettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Save - Захаваць - - OpenRGBHardwareIDsDialog @@ -1280,50 +1065,6 @@ Ідэнтыфікатары абсталявання - - OpenRGBKasaSmartSettingsEntry - - Name - Назва - - - - OpenRGBKasaSmartSettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Save - Захаваць - - - - OpenRGBLIFXSettingsEntry - - Name - Назва - - - - OpenRGBLIFXSettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Save - Захаваць - - OpenRGBLogConsolePage @@ -1360,139 +1101,6 @@ Шырыня: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - Дадаць прыладу Nanoleaf - - - IP address: - IP-адрас: - - - Port: - Порт: - - - - OpenRGBNanoleafSettingsEntry - - Port: - Порт: - - - Auth Key: - Ключ аўтарызацыі: - - - Unpair - Разлучыць - - - Pair - Спалучыць - - - - OpenRGBNanoleafSettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Scan - Сканіраваць - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - Для спалучэння ўтрымлівайце кнопку ўкл./выкл на працягу 5-7 секунд, пакуль святлодыёд не пачне перыядычна міргаць, затым на працягу 30 секунднага інтэрвалу націсніце кнопку "Спалучыць" ("Pair"). - - - - OpenRGBPhilipsHueSettingsEntry - - Entertainment Mode: - Рэжым забавы: - - - Username: - Імя карыстальніка: - - - Client Key: - Ключ кліента: - - - Unpair Bridge - Разлучыць мост - - - Auto Connect Group: - Група для аўтаматычнага злучэння: - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Выдаліць - - - Add - Дадаць - - - Save - Захаваць - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Пасля дадання прылад Hue і захавання, перазапусціце OpenRGB і націсніце кнопку Sync на Hue масце, каб спалучыць яго. - - - - OpenRGBPhilipsWizSettingsEntry - - Use Cool White - Халодны белы - - - Use Warm White - Цёплы белы - - - White Strategy: - Вызначэнне белага: - - - Average - Па сярэдняму - - - Minimum - Па мінімуму - - - - OpenRGBPhilipsWizSettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Save - Захаваць - - OpenRGBPluginsEntry @@ -1535,10 +1143,6 @@ API Version: Версія API: - - API Version Value - Значэнне версіі API - OpenRGBPluginsPage @@ -1549,7 +1153,7 @@ - + Remove Plugin Выдаліць убудову @@ -1559,37 +1163,37 @@ <html><head/><body>Глядзіце афіцыйны спіс убудоў на сайце <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Усталяваць убудову OpenRGB - + Plugin files (*.dll *.dylib *.so *.so.*) Файлы ўбудоў (*.dll *.dylib *.so *.so.*) - + Replace Plugin Замяніць убудову - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Убудова з такой назвай файла ўжо ўсталявана. Замяніць усталяваную ўбудову? - + Are you sure you want to remove this plugin? Вы сапраўды хочаце выдаліць гэту ўбудову? - + Restart Needed Патрабуецца перазапуск - + The plugin will be fully removed after restarting OpenRGB. Убудова будзе цалкам выдалена пасля перазапуску OpenRGB. @@ -1656,14 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - Назва профілю - - - Save to an existing profile: - Захаваць у існуючы профіль: - Profile Selection @@ -1680,28 +1276,6 @@ Стварыць новы профіль: - - OpenRGBQMKORGBSettingsEntry - - Name: - Назва: - - - - OpenRGBQMKORGBSettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Save - Захаваць - - OpenRGBSegmentExportDialog @@ -1730,44 +1304,6 @@ Назва прылады (неабязатальная): - - OpenRGBSerialSettingsEntry - - Baud: - Baud (хуткасць перадачы): - - - Name: - Назва: - - - Number of LEDs: - Колькасць святлодыёдаў: - - - Port: - Порт: - - - Protocol: - Пратакол: - - - - OpenRGBSerialSettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Save - Захаваць - - OpenRGBServerInfoPage @@ -1993,10 +1529,6 @@ Address: Адрас: - - Read Device - Чытаць прыладу - SMBus Dumper: @@ -2049,10 +1581,6 @@ Dump Device Дамп прылады - - SMBus Reader: - Чытальнік SMBus: - Addr: @@ -2069,50 +1597,8 @@ Памер: - - OpenRGBYeelightSettingsEntry - - Music Mode: - Музычны рэжым: - - - Override host IP: - Перавызначыць IP хаста: - - - Left blank for auto discovering host ip - Пакіньце пустым для аўтаматычнага выяўлення IP хаста - - - Choose an IP... - Выбраць IP... - - - Choose the correct IP for the host - Выбраць правільны IP для хаста - - - - OpenRGBYeelightSettingsPage - - Add - Дадаць - - - Remove - Выдаліць - - - Save - Захаваць - - OpenRGBZoneEditorDialog - - Resize Zone - Змяніць памер зоны - Add Segment @@ -2222,18 +1708,6 @@ Ignore Ігнараваць - - Zones Resizer - Змяненне памеру зон - - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>Адна або некалькі зон зменнага памеру не былі сканфігураваны. Зоны зменнага памеру звычайна выкарыстоўваюцца для прылад з адраснымі RGB headers, дзе колькасць святлодыёдаў падключанай прылады не можа быць вызначана аўтаматычна.</p><p>Калі ласка, увядзіце колькасць святлодыёдаў для кожнай зоны ніжэй.</p><p>Дадатковую інфармацыю аб разліку правільнага памеру зон можна знайсці па <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">гэтай спасылцы</span></a>.</p></body></html> - - - Resize the zones - Змена памеру зон - Controller @@ -2377,25 +1851,6 @@ USB VID: - - ResourceManager - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the WinRing0 driver.</p><p>You must run OpenRGB as administrator at least once to allow WinRing0 to set up.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Частка ўбудаванага абсталявання магла быць не вызначана:</h2><p>Не ўдалося ініцыялізаваць адзін або некалькі інтэрфейсаў I2C або SMBus.</p><p><b>Модулі RGB DRAM, убудаваная RGB-падсветка некаторых мацярынскіх плат і відэакарт не будуць даступныя ў OpenRGB</b> без доступу да інтэрфейсаў I2C або SMBus.</p><h4>Як выправіць гэтую праблему:</h4><p>На Windows прычынай гэтага звычайна з'яўляецца збой загрузкі драйвера WinRing0.</p><p>Вам трэба запусціць OpenRGB ад імя адміністратара як мінімум адзін раз, каб WinRing0 змог усталявацца.</p><p>Калі вы працягваеце бачыць гэтае паведамленне - глядзіце старонку <a href='https://help.openrgb.org/'>help.openrgb.org</a> для атрымання дадатковых звестак па выяўленню і ўстараненню праблемы.<br></p><h3>Калі вы не выкарыстоўваеце ўбудаваную RGB-падсветку на настольным камп’ютары, гэтае паведамленне можна праігнараваць.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Частка ўбудаванага абсталявання магла быць не вызначана:</h2><p>Не ўдалося ініцыялізаваць адзін або некалькі інтэрфейсаў I2C або SMBus.</p><p><b>Модулі RGB DRAM, убудаваная RGB-падсветка некаторых мацярынскіх плат і відэакарт не будуць даступныя ў OpenRGB</b> без доступу да інтэрфейсаў I2C або SMBus.</p><h4>Як выправіць гэтую праблему:</h4><p>На Linux гэта звычайна адбываецца таму, што модуль i2c-dev не загружаны.</p><p>Вам трэба загрузіць модуль i2c-dev разам з правільным драйверам i2c, які адпавядае вашай мацярынскай плаце. Для сістэм AMD гэта звычайна i2c-piix4, а для сістэм Intel – i2c-i801.</p><p>Калі вы працягваеце бачыць гэтае паведамленне - глядзіце старонку <a href='https://help.openrgb.org/'>help.openrgb.org</a> для атрымання дадатковых звестак па выяўленню і ўстараненню праблемы.<br></p><h3>Калі вы не выкарыстоўваеце ўбудаваную RGB-падсветку на настольным камп’ютары, гэтае паведамленне можна праігнараваць.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>ПАПЯРЭДЖАННЕ:</h2><p>Правілы OpenRGB udev не ўсталяваны.</p><p>Большасць прылад не будуць даступныя, хіба што OpenRGB не будзе выконвацца як root.</p><p>Калі OpenRGB усталяваны як AppImage, Flatpak або скампіляваны з зыходнага кода, вам трэба ўсталяваць правілы udev уручную.</p><p>Кіраўніцтва па усталяванню правілаў udev: <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a></p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ПАПЯРЭДЖАННЕ:</h2><p>Усталявана некалькі правілаў OpenRGB udev.</p><p>Файл правілаў udev 60-openrgb.rules усталяваны у /etc/udev/rules.d, так і ў /usr/lib/udev/rules.d.</p><p>Некалькі файлаў правілаў udev могуць канфліктаваць паміж сабой, рэкамендуецца выдаліць адзін з іх.</p> - - SerialSettingsEntry @@ -2429,7 +1884,7 @@ Порт: - + No serial ports found Не знайдзены пасылкавыя порты @@ -2437,349 +1892,285 @@ Settings - + Load Window Geometry Загружаць геаметрыю акна - + Run Zone Checks on Rescan Запускаць праверкі зон пры паўторным сканаванні - Start Server - Запусціць сервер - - - + Start Minimized Запускаць у згорнутым выглядзе - User Interface Settings: - Налады карыстальніцкага інтэрфейсу: - - - + Start at Login Запускаць пры ўваходзе ў сістэму - + Minimize on Close Згортваць замест закрыцця - + Numerical Labels Чыслоўныя пазначкі - + Display numerical labels for otherwise non-labeled LEDs in the LED view Паказаць нумарызаваныя пазначкі для LED, якія інакш не маюць пазначак у поглядзе LED - + Window Geometry Памярко акна - + Save on Exit Захоўваць геаметрыю акна пры закрыцці - Start Client - Запусціць кліент - - - Load Profile - Задаць профіль пры запуску - - - Set Server Port - Задаць порт сервера - - - + HID Safe Mode Рэжым бяспекі HID - + Use an alternate method for detecting HID devices Выкарыстоўваць альтэрнатыўны спосаб для выяўлення прылад HID - + Initial Detection Delay (ms) Апёкі звычайнае выяўлення (мс) - + Amount of time, in milliseconds, to wait before detecting devices when started Колькасць часу, у мілісекундах, які трэба чакаць перад выяўленнем прыладаў пасля запуску - + Detection Выяўленне - + Enable Log Console Уключыць кансоль журнала - + Log Level Узровень лагіравання - + Log File Count Limit Мяжына колькасці файлоў дыярэктарыі лагу - + Maximum number of log files to keep, 0 for no limit Максімальна колькасць файлоў дыярэктарыі, якія павінны захоўвацца, 0 для адсутнасці межы - + Log Manager Менеджэр лагіў - + Serve All Controllers Служыць усім кантролерам - + Include controllers provided by client connections and plugins Уключыць кантролеры, прадастаўленыя кліентамі, плаґінамі і злучэннямі - + Default Host Значэнне па замыслу - + Default Port Значэнне па замыслу - + Legacy Workaround Застарэлы спосаб развязкі - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Рашэнне для некаторых старых SDK, якія шылі няправільны памер пакета для пэўных пакетаў - + Server Сервер - + Custom Arguments Параметры каманднага радка - Log Manager Settings: - Налады вядзення журнала: - - - Start at Login Status - Статус запуску пры ўваходзе ў сістэму - - - Start at Login Settings: - Налады запуску пры ўваходзе ў сістэму: - - - Open Settings Folder - Адкрыць папку налад - - - Drivers Settings - Налады драйвераў - - - + Monochrome Tray Icon Значок вобласці апавяшчэнняў у градацыях шэрага - + Save window geometry on exit Захаваць геаметрыю акна пры выхадзе - + X Х - + Y Y - + Width Шырыня - + Height Вышыня - + User Interface Інтэрфейс карыстальніка - + SMBus Sleep Mode (restart required) Рэжым сну SMBus (патрэбна перапуск) - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: зменшыць выкарыстанне ЦП (патрабуецца перазапуск) - Set Profile on Exit - Задаць профіль пры выхадзе з праграмы - - - + Shared SMBus Access (restart required) Абагулены доступ да SMBus (патрабуецца перазапуск) - Set Server Host - Задаць хост сервера - - - + Language Мова - + Disable Key Expansion Адключыць пашырэнне клавіш у перадпраглядзе LED - + Hex Format Фармат шаснаццатковых лікаў (HEX) - + Enable Start at Login Уключыць запуск пры ўваходзе - + Start OpenRGB on login Запускаць OpenRGB падчас лагінаў - + Start minimized to the system tray Пачынаць у мінімізаваным выглядзе ў панэлі сістэмы - + Additional command line arguments to pass to OpenRGB when starting on login Дадатковыя аргументы радка каманды, якія павінны быць пераданы OpenRGB падчас запуску пры лагінаванні - + Language for the user interface Мова для інтэрфейсу карыстальніка - + Keep OpenRGB active in the system tray when closing the main window Завяршэнне працаўніка OpenRGB у трэйсі сістэмы падчас закрыцця галоўнага акна - + Use a monochrome icon in the system tray instead of a full color icon Выкарыстоўваць чорна-бялую іконку ў сістэмным лічыбніку замест поўнацветнай іконкі - + Select #BBGGRR or #RRGGBB format for hex display and input Выберыце фармат #BBGGRR або #RRGGBB для шэстнадцятковага адлюстравання і ўводу - + Compact Tabs Кампактныя закладкі - + Display sidebar tabs as icons only Паказаць закладкі бакавой панелі толькі як іконкі - + Tabs on Top Вкладкі на вершыні - + Display tabs on top instead of on the left Паказаць закладкі ў верхняй частцы замісць левай часткі - + Show LED View by Default Паказваць перадпрагляд LED па змаўчанні - + Drivers Драйверы - Set Profile on Suspend - Задаць профіль пры прыпыненні працы камп'ютара - - - Set Profile on Resume - Задаць профіль пры ўзнаўленні працы камп'ютара - - - + Enable Log File Уключыць вядзенне журнала - - A problem occurred enabling Start at Login. - Узнікла праблема з уключэннем аўтазапуску пры ўваходзе. - English - US Беларуская - - System Default - Прадвызначана сістэмай - Load Profile on Exit @@ -2812,16 +2203,36 @@ + Load Profile on Service Shutdown + Загрузіць прафіль пры выключэнні службы + + + + Profile to load when the OpenRGB background service shuts down + Профіль, які будзе завантажаны, калі фонавы сэрвіс OpenRGB завяршыць працу + + + + Load Profile on Service Startup + Загрузіць прафіль падчас запуску службы + + + + Profile to load when the OpenRGB background service starts up + Профіль, які будзе завантажаны, калі фонавы сэрвіс OpenRGB запускаецца + + + Load Profile on Suspend Загрузіць прафіль пры спыненні - + Profile to load before system enters sleep mode Профіль для завантажэння перад тым, як сістэма пераходзіць у режим сну - + Profile Manager Менеджэр прафіляў diff --git a/qt/i18n/OpenRGB_de_DE.ts b/qt/i18n/OpenRGB_de_DE.ts index 8090505a6..cc3e0b27d 100644 --- a/qt/i18n/OpenRGB_de_DE.ts +++ b/qt/i18n/OpenRGB_de_DE.ts @@ -92,7 +92,7 @@ Port: - + No serial ports found Keine seriellen Ports gefunden @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Einige interne Geräte können nicht erkannt werden:</h2><p>Eine oder mehrere I2C- oder SMBus-Schnittstellen konnten nicht initialisiert werden.</p><p><b>RGB-DRAM-Module, das RGB-Licht auf einigen Mainboards und RGB-Grafikkarten werden in OpenRGB nicht verfügbar sein</b>, ohne I2C oder SMBus.</p><h4>So beheben Sie dies:</h4><p>Auf Windows ist dies in der Regel durch einen Fehler beim Laden des PawnIO-Treibers verursacht.</p><p>Sie müssen zuerst <a href='https://pawnio.eu/'>PawnIO</a> installieren, dann müssen Sie OpenRGB als Administrator öffnen, um auf diese Geräte zugreifen zu können.</p><p>Weitere Schritte zur Problembehandlung finden Sie unter <a href='https://help.openrgb.org/'>help.openrgb.org</a>, wenn Sie diese Nachricht weiterhin sehen.<br></p><h3>Wenn Sie keine interne RGB-Beleuchtung auf einem Desktop verwenden, ist diese Nachricht für Sie nicht wichtig.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Einige interne Geräte werden möglicherweise nicht erkannt:</h2><p>Eine oder mehrere I2C- oder SMBus-Schnittstellen konnten nicht initialisiert werden.</p><p><b>RGB-DRAM-Module, die integrierte RGB-Beleuchtung mancher Motherboards und RGB-Grafikkarten sind in OpenRGB</b> ohne I2C oder SMBus nicht verfügbar.</p><h4>So beheben Sie das Problem:</h4><p>Unter Linux liegt dies normalerweise daran, dass das Modul i2c-dev nicht geladen ist.</p><p>Sie müssen das Modul i2c-dev zusammen mit dem richtigen i2c-Treiber für Ihr Motherboard laden. Dies ist normalerweise i2c-piix4 für AMD-Systeme und i2c-i801 für Intel-Systeme.</p><p>Wenn diese Meldung weiterhin angezeigt wird, finden Sie unter <a href='https://help.openrgb.org/'>help.openrgb.org</a> weitere Schritte zur Fehlerbehebung.<br></p><h3>Wenn Sie kein internes RGB auf einem Desktop verwenden, ist diese Meldung für Sie nicht wichtig.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>WARNUNG:</h2><p>Die OpenRGB udev-Regeln sind nicht installiert.</p><p>Die meisten Geräte sind nur verfügbar, wenn Sie OpenRGB als root ausführen.</p><p>Wenn Sie AppImage, Flatpak oder selbst kompilierte Versionen von OpenRGB verwenden, müssen Sie die udev-Regeln manuell installieren</p><p>Sehe <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> um die udev-Regeln manuell zu installieren</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>WARNUNG:</h2><p>Mehrere OpenRGB udev-Regeln sind installiert.</p><p>Die Udev-Regeldatei 60-openrgb.rules ist gleichzeitig in /etc/udev/rules.d und in /usr/lib/udev/rules installiert.d.</p><p>Mehrere udev-Regeldateien können zu Konflikten führen, es wird empfohlen eine davon zu entfernen.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Warnung:</h2><p>Eine oder mehrere I2C/SMBus-Schnittstellen konnten nicht initialisiert werden.</p><p>Je nachdem, welche Schnittstellen nicht initialisiert wurden, können einige RGB-DRAM-Module, einige RGB-Beleuchtung auf der Hauptplatine und RGB-Grafikkarten in OpenRGB nicht verfügbar sein.</p><p>Unter Windows ist dies in der Regel auf einen Fehler beim Laden des PawnIO-Treibers zurückzuführen.</p><p>Um OpenRGB auf diese Geräte zugreifen zu lassen, müssen Sie PawnIO von <a href='https://pawnio.eu/'>https://pawnio.eu</a> installieren und OpenRGB als Administrator oder als Systemdienst ausführen.</p><p>Wenn Sie keines der oben genannten Geräte verwenden, können Sie diese Meldung sicher ignorieren.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Warnung:</h2><p>Eine oder mehrere I2C/SMBus-Schnittstellen konnten nicht initialisiert werden.</p><p>Je nachdem, welche Schnittstellen nicht initialisiert wurden, können einige RGB-DRAM-Module, einige RGB-Beleuchtungseinheiten auf der Hauptplatine und RGB-Grafikkarten in OpenRGB nicht verfügbar sein.</p><p>Unter Linux liegt dies in der Regel daran, dass das Modul i2c-dev nicht geladen ist.</p><p>Um diese Geräte mit OpenRGB zugreifen zu können, müssen Sie das Modul i2c-dev sowie das richtige I2C-Treibermodul für Ihre Hauptplatine laden. Dies ist in der Regel i2c-piix4 für AMD-Systeme und i2c-i801 für Intel-Systeme.</p><p>Wenn Sie keines der oben genannten Geräte verwenden, können Sie diese Meldung sicher ignorieren.</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Warnung:</h2><p>Die OpenRGB udev-Regeln sind nicht installiert.</p><p>Die meisten Geräte werden nicht verfügbar sein, es sei denn, OpenRGB als Root ausgeführt wird.</p><p>Wenn Sie AppImage, Flatpak oder selbst kompilierte Versionen von OpenRGB verwenden, müssen Sie die udev-Regeln manuell installieren.</p><p>Weitere Informationen zur manuellen Installation der udev-Regeln finden Sie unter <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Warnung:</h2><p>Die OpenRGB udev-Regeln sind nicht installiert.</p><p>Die meisten Geräte werden nicht verfügbar sein, es sei denn, OpenRGB als Systemdienst oder mit Root-Rechten ausgeführt wird.</p><p>Wenn Sie AppImage, Flatpak oder selbst kompilierte Versionen von OpenRGB verwenden, müssen Sie die udev-Regeln manuell installieren.</p><p>Weitere Informationen zur manuellen Installation der udev-Regeln finden Sie unter <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Warnung:</h2><p>Mehrere OpenRGB udev-Regeldateien sind installiert.</p><p>Die udev-Regeldatei 60-openrgb.rules ist in beiden /etc/udev/rules.d und /usr/lib/udev/rules.d installiert.</p><p>Mehrere udev-Regeldateien können sich gegenseitig beeinflussen. Es wird empfohlen, eine von ihnen zu entfernen.</p> @@ -363,7 +347,7 @@ QMK (VialRGB-Protokoll) - + Serial Device Serielles Gerät @@ -499,60 +483,19 @@ Verbindung speichern - + Rescan Devices Geräte erneut scannen - + Disconnect Trennen - - - OpenRGBDMXSettingsEntry - Name: - Name: - - - Port: - Port: - - - Red Channel: - Roter Kanal: - - - Green Channel: - Grüner Kanal: - - - Blue Channel: - Blauer Kanal: - - - Brightness Channel: - Helligkeits Kanal: - - - Keepalive Time: - Wachdauer: - - - - OpenRGBDMXSettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Save - Speichern + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB befindet sich im lokalen Client-Modus. Die lokale Verbindung kann nicht getrennt werden. @@ -564,44 +507,64 @@ + Device Configuration + Gerätekonfiguration + + + + Device Name: + Gerätebezeichnung: + + + Device-Specific Configuration Gerätespezifische Konfiguration + + + Reset Device Configuration + Gerät konfigurieren zurücksetzen + OpenRGBDeviceInfoPage - + Name: Name: - + Vendor: Hersteller: - + Type: Typ: - + + Display Name: + Anzeigename: + + + Description: Beschreibung: - + Version: Version: - + Location: Pfad: - + Serial: Seriennummer: @@ -704,7 +667,7 @@ Hellwert(V): - + Edit Zone Zone bearbeiten @@ -725,7 +688,7 @@ - + Save To Device Auf Gerät speichern @@ -735,113 +698,133 @@ Hex: - + Set individual LEDs to static colors. Safe for use with software-driven effects. Einzelne LEDs auf statische Farben einstellen. Sicher für die Verwendung mit softwaregesteuerten Effekten. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Einzelne LEDs auf statische Farben einstellen. Nicht sicher für die Verwendung mit softwaregesteuerten Effekten. - + Sets the entire device or a zone to a single color. Setzt das gesamte Gerät oder eine Zone auf eine einzelne Farbe. - + Gradually fades between fully off and fully on. Allmähliche Überblendung zwischen vollständig ausgeschaltet und vollständig eingeschaltet. - + Abruptly changes between fully off and fully on. Wechselt abrupt zwischen vollständig ausgeschaltet und vollständig eingeschaltet. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Durchläuft allmählich das gesamte Farbspektrum. Alle Lichter des Geräts haben die gleiche Farbe. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Durchläuft allmählich das gesamte Farbspektrum. Erzeugt ein Regenbogenmuster, das sich bewegt. - + Flashes lights when keys or buttons are pressed. Leuchtet auf wenn Tasten betätigt werden. - - + + Entire Device Gesamtes Gerät - + Edit Device - + Gerät bearbeiten - + Entire Zone Gesamte Zone - + Left Links - + Right Rechts - + Up Oben - + Down Unten - + Horizontal Horizontal - + Vertical Vertikal - + + Up-Left + Oben-Links + + + + Up-Right + Rechts-Oben + + + + Down-Left + Unten-Links + + + + Down-Right + Unten-Rechts + + + Saved To Device Auf Gerät gespeichert - + Saving Not Supported Speichern wird nicht unterstützt - + All Zones Alle Zonen - + Mode Specific Modus-spezifisch - + Entire Segment Ganzes Segment @@ -880,7 +863,8 @@ - + + Rescan Devices Geräte erneut scannen @@ -893,14 +877,10 @@ - + Delete Profile Profil löschen - - Load Profile - Profil laden - OpenRGB is detecting devices... @@ -922,168 +902,128 @@ Profil mit eigenem Namen speichern - + + Show/Hide Einblenden/Ausblenden - + + Profiles Profile - + + Quick Colors Schnelle Farben - + + Red Rot - + + Yellow Gelb - + + Green Grün - + + Cyan Cyan - + + Blue Blau - + + Magenta Magenta - + + White Weiß - + + Lights Off Lichter aus - + + Exit Schließen - + Plugins Plugins - + About OpenRGB Über OpenRGB - + Manually Added Devices Manuell hinzugefügte Geräte - Software - Software - - - + Supported Devices Unterstützte Geräte - + General Settings Using "Allg." as shorthand for "Allgemeine". "Allgemeine" would be too long for the UI. So until text size is handled differently this should do it. Allg. Einstellungen - DMX Devices - DMX Geräte - - - E1.31 Devices - E1.31 Geräte - - - Kasa Smart Devices - Kasa Smart Geräte - - - Philips Hue Devices - Philips Hue Geräte - - - Philips Wiz Devices - Philips Wiz Geräte - - - OpenRGB QMK Protocol - OpenRGB QMK Protokoll - - - Serial Devices - Serielle Geräte - - - Yeelight Devices - Yeelight Geräte - - - + SMBus Tools SMBus Werkzeuge - + SDK Client SDK Client - + SDK Server SDK Server - + Do you really want to delete this profile? Das Profil wirklich löschen? - + Log Console Log-Konsole - - LIFX Devices - LIFX Geräte - - - Nanoleaf Devices - Nanoleaf Geräte - - - Elgato KeyLight Devices - Elgato KeyLight Geräte - - - Elgato LightStrip Devices - Elgato LightStrip Geräte - OpenRGBDynamicSettingsWidget @@ -1098,182 +1038,6 @@ Systemstandard - - OpenRGBE131SettingsEntry - - Start Channel: - Anfangskanal: - - - Number of LEDs: - LED Anzahl: - - - Start Universe: - Anfangsuniversum: - - - Name: - Name: - - - Matrix Order: - Matrixanordnung: - - - Matrix Height: - Matrixhöhe: - - - Matrix Width: - Matrixbreite: - - - Type: - Typ: - - - IP (Unicast): - IP (Unicast): - - - Universe Size: - Univerumsgröße: - - - Keepalive Time: - Wachdauer: - - - RGB Order: - RGB Reihenfolge: - - - Single - Einzeln - - - Linear - Linear - - - Matrix - Matrix - - - Horizontal Top Left - Horizontal Oben Links - - - Horizontal Top Right - Horizontal Oben Rechts - - - Horizontal Bottom Left - Horizontal Unten Links - - - Horizontal Bottom Right - Horizontal Unten Rechts - - - Vertical Top Left - Vertikal Oben Links - - - Vertical Top Right - Vertikal Oben Rechts - - - Vertical Bottom Left - Vertikal Unten Links - - - Vertical Bottom Right - Vertikal Unten Rechts - - - - OpenRGBE131SettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Save - Speichern - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Save - Speichern - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Save - Speichern - - - - OpenRGBGoveeSettingsEntry - - IP: - IP: - - - - OpenRGBGoveeSettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Save - Speichern - - OpenRGBHardwareIDsDialog @@ -1302,58 +1066,6 @@ Hardware IDs - - OpenRGBKasaSmartSettingsEntry - - IP: - IP: - - - Name - Name - - - - OpenRGBKasaSmartSettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Save - Speichern - - - - OpenRGBLIFXSettingsEntry - - IP: - IP: - - - Name - Name - - - - OpenRGBLIFXSettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Save - Speichern - - OpenRGBLogConsolePage @@ -1392,155 +1104,6 @@ Breite: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - Neues Nanoleaf Gerät - - - IP address: - IP Adresse: - - - Port: - Port: - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP: - - - Port: - Port: - - - Auth Key: - Auth-Schlüssel - - - Unpair - Entkoppeln - - - Pair - Koppeln - - - - OpenRGBNanoleafSettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Scan - Scannen - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - Halten Sie zum Koppeln die Ein-/Aus-Taste 5–7 Sekunden lang gedrückt, bis die LED in einem Muster blinkt, und klicke dann innerhalb von 30 Sekunden auf "Koppeln". - - - - OpenRGBPhilipsHueSettingsEntry - - IP: - IP: - - - Entertainment Mode: - Kinomodus: - - - Username: - Benutzername: - - - Client Key: - Client-Schlüssel: - - - Unpair Bridge - Brücke entkoppeln - - - MAC: - MAC: - - - Auto Connect Group: - Auto-Connect-Gruppe - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Entfernen - - - Add - Hinzufügen - - - Save - Speichern - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Nachdem Sie einen Hue Eintrag hinzugefügt und gespeichert haben, starte OpenRGB neu und drücke die Sync Taste an Ihrer Hue-Bridge, um sie zu koppeln. - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP: - - - Use Cool White - Nutze Kaltweiß - - - Use Warm White - Nutze Warmweiß - - - White Strategy: - Weiß Strategie: - - - Average - Durchschnitt - - - Minimum - Minimum - - - - OpenRGBPhilipsWizSettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Save - Speichern - - OpenRGBPluginsEntry @@ -1583,10 +1146,6 @@ Breite: API Version: API Version: - - API Version Value - API Version Wert - OpenRGBPluginsPage @@ -1597,7 +1156,7 @@ Breite: - + Remove Plugin Plugin entfernen @@ -1607,37 +1166,37 @@ Breite: <html><head/><body>Suchen Sie nach Plugins? Die offizielle Liste finden Sie unter <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin OpenRGB Plugin installieren - + Plugin files (*.dll *.dylib *.so *.so.*) Plugin-Dateien (*.dll *.dylib *.so *.so.*) - + Replace Plugin Plugin ersetzen - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Ein Plugin mit diesem Namen existiert bereits. Plugin wirklich ersetzen? - + Are you sure you want to remove this plugin? Das Plugin wirklich entfernen? - + Restart Needed Programmneustart Erforderlich - + The plugin will be fully removed after restarting OpenRGB. Das Plugin wird nach einem Neustart von OpenRGB vollständig entfernt. @@ -1704,10 +1263,6 @@ Breite: OpenRGBProfileListDialog - - Profile Name - Profil Name - Profile Selection @@ -1723,40 +1278,6 @@ Breite: Create a new profile: Neues Profil erstellen: - - Save to an existing profile: - Zu existierendem Profil speichern: - - - - OpenRGBQMKORGBSettingsEntry - - Name: - Name: - - - USB PID: - USB PID: - - - USB VID: - USB VID: - - - - OpenRGBQMKORGBSettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Save - Speichern - OpenRGBSegmentExportDialog @@ -1786,44 +1307,6 @@ Breite: Gerätename (optional): - - OpenRGBSerialSettingsEntry - - Baud: - Baud: - - - Name: - Name: - - - Number of LEDs: - LED Anzahl: - - - Port: - Port: - - - Protocol: - Protokoll: - - - - OpenRGBSerialSettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Save - Speichern - - OpenRGBServerInfoPage @@ -1943,14 +1426,6 @@ Breite: Website: Webseite: - - <a href="https://openrgb.org">https://openrgb.org</a> - <a href="https://openrgb.org">https://openrgb.org</a> - - - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - SDK Version: @@ -2057,10 +1532,6 @@ Breite: Address: Adresse: - - Read Device - Gerät lesen - SMBus Dumper: @@ -2113,10 +1584,6 @@ Breite: Dump Device Ausgabegerät - - SMBus Reader: - SMBus Reader: - Addr: @@ -2133,58 +1600,8 @@ Breite: Größe: - - OpenRGBYeelightSettingsEntry - - IP: - IP: - - - ? - ? - - - Music Mode: - Musik Modus: - - - Override host IP: - Host-IP überschreiben: - - - Left blank for auto discovering host ip - Leer lassen für automatische Erkennung der Host-IP - - - Choose an IP... - IP wählen... - - - Choose the correct IP for the host - Wähle die korrekte IP für den Host - - - - OpenRGBYeelightSettingsPage - - Add - Hinzufügen - - - Remove - Entfernen - - - Save - Speichern - - OpenRGBZoneEditorDialog - - Resize Zone - Größe der Zone ändern - Add Segment @@ -2294,18 +1711,6 @@ Breite: Ignore Ignorieren - - Zones Resizer - Zonen-Resizer - - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>Eine oder mehrere größenveränderbare Zonen wurden nicht konfiguriert. Größenveränderbare Zonen werden am häufigsten für adressierbare RGB-Header verwendet, bei denen die Größe des angeschlossenen Geräts nicht automatisch erkannt werden kann.</p><p>Bitte gebe unten die Anzahl der LEDs in jeder Zone ein.</p><p>Weitere Informationen zur Berechnung der richtigen Größe finden Sie unter <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - - - Resize the zones - Zonengrößen verändern - Controller @@ -2449,25 +1854,6 @@ Breite: USB VID: - - ResourceManager - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the WinRing0 driver.</p><p>You must run OpenRGB as administrator at least once to allow WinRing0 to set up.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Einige interne Geräte werden möglicherweise nicht erkannt:</h2><p>Eine oder mehrere I2C- oder SMBus-Schnittstellen konnten nicht initialisiert werden.</p><p><b>RGB-DRAM-Module, die integrierte RGB-Beleuchtung einiger Motherboards und RGB-Grafikkarten sind in OpenRGB nicht verfügbar.</b> ohne I2C oder SMBus.</p><h4>So beheben Sie das Problem:</h4><p>Unter Windows wird dies normalerweise durch einen Fehler beim Laden des WinRing0-Treibers verursacht.</p><p>Sie müssen OpenRGB mindestens einmal als Administrator ausführen, damit WinRing0 eingerichtet werden kann.</p><p>Wenn diese Meldung weiterhin angezeigt wird, finden Sie unter <a href='https://help.openrgb.org/'>help.openrgb.org</a> weitere Schritte zur Fehlerbehebung.<br></p><h3>Wenn Sie kein internes RGB auf einem Desktop verwenden, ist diese Meldung für Sie nicht wichtig.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Einige interne Geräte werden möglicherweise nicht erkannt:</h2><p>Eine oder mehrere I2C- oder SMBus-Schnittstellen konnten nicht initialisiert werden.</p><p><b>RGB-DRAM-Module, die integrierte RGB-Beleuchtung mancher Motherboards und RGB-Grafikkarten sind in OpenRGB</b> ohne I2C oder SMBus nicht verfügbar.</p><h4>So beheben Sie das Problem:</h4><p>Unter Linux liegt dies normalerweise daran, dass das Modul i2c-dev nicht geladen ist.</p><p>Sie müssen das Modul i2c-dev zusammen mit dem richtigen i2c-Treiber für Ihr Motherboard laden. Dies ist normalerweise i2c-piix4 für AMD-Systeme und i2c-i801 für Intel-Systeme.</p><p>Wenn diese Meldung weiterhin angezeigt wird, finden Sie unter <a href='https://help.openrgb.org/'>help.openrgb.org</a> weitere Schritte zur Fehlerbehebung.<br></p><h3>Wenn Sie kein internes RGB auf einem Desktop verwenden, ist diese Meldung für Sie nicht wichtig.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>WARNUNG:</h2><p>Die OpenRGB udev-Regeln sind nicht installiert.</p><p>Die meisten Geräte sind nur verfügbar, wenn Sie OpenRGB als root ausführen.</p><p>Wenn Sie AppImage, Flatpak oder selbst kompilierte Versionen von OpenRGB verwenden, müssen Sie die udev-Regeln manuell installieren</p><p>Sehe <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> um die udev-Regeln manuell zu installieren</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>WARNUNG:</h2><p>Mehrere OpenRGB udev-Regeln sind installiert.</p><p>Die Udev-Regeldatei 60-openrgb.rules ist gleichzeitig in /etc/udev/rules.d und in /usr/lib/udev/rules installiert.d.</p><p>Mehrere udev-Regeldateien können zu Konflikten führen, es wird empfohlen eine davon zu entfernen.</p> - - SerialSettingsEntry @@ -2501,7 +1887,7 @@ Breite: Port: - + No serial ports found Keine seriellen Ports gefunden @@ -2509,353 +1895,285 @@ Breite: Settings - + Load Window Geometry Fenster Geometrie laden - 90000 - 90000 - - - + Run Zone Checks on Rescan Zonen beim erneuten Scannen überprüfen - + Disable Key Expansion Deaktiviere Schlüsselerweiterung in der Geräteansicht - Start Server - Server starten - - - + Show LED View by Default LED anzeige standardmäßig zeigen - Set Profile on Suspend - Profil beim Schlafen anwenden - - - + Enable Start at Login Bei Anmeldung starten - + Start OpenRGB on login Bei der Anmeldung OpenRGB starten - + Start Minimized Minimiert Starten - + Start minimized to the system tray Im System Tray minimieren - + Additional command line arguments to pass to OpenRGB when starting on login Zusätzliche Befehlszeilenargumente, die an OpenRGB übergeben werden sollen, wenn diese beim Anmeldevorgang gestartet wird - + Language for the user interface Sprache für die Benutzeroberfläche - + Keep OpenRGB active in the system tray when closing the main window OpenRGB im System Tray aktiv lassen, wenn das Hauptfenster geschlossen wird - + Monochrome Tray Icon Graues Icon - User Interface Settings: - Einstellungen der Benutzeroberfläche: - - - Set Profile on Resume - Profil beim Aufwachen anwenden - - - + Start at Login Bei der Anmeldung starten - Set Profile on Exit - Profil beim Schließen anwenden - - - + HID Safe Mode HID-Sicherer Modus - + Use an alternate method for detecting HID devices Eine alternative Methode zur Erkennung von HID-Geräten verwenden - + Initial Detection Delay (ms) Anfangserkennungsverzögerung (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started Die Zeit in Millisekunden, die gewartet werden soll, bevor Geräte beim Start erkannt werden - + Detection Erkennung - + Enable Log File Log Datei aktivieren - + Log Level Protokollierungsstufe - + Log File Count Limit Logdateien Anzahl Limit - + Maximum number of log files to keep, 0 for no limit Maximale Anzahl der zu behaltenden Protokolldateien, 0 für keine Begrenzung - + Log Manager Protokoll-Manager - + Serve All Controllers Alle Controller bereitstellen - + Include controllers provided by client connections and plugins Controller einbeziehen, die von Clientverbindungen und Plug-ins bereitgestellt werden - + Default Host Standard-Host - + Default Port Standardport - + Legacy Workaround Legacy Workaround - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Umgehungsmethode für einige ältere SDK-Implementierungen, die falsche Paketgrößen für bestimmte Pakete gesendet haben - + Server Server - + Minimize on Close Beim Schließen in die Taskleiste minimieren - + Use a monochrome icon in the system tray instead of a full color icon Ein monochromes Icon im System Tray verwenden anstelle eines vollfarbigen Icons - + Select #BBGGRR or #RRGGBB format for hex display and input Wählen Sie das Format #BBGGRR oder #RRGGBB für die hexadezimale Anzeige und Eingabe aus - + Compact Tabs Kompakte Registerkarten - + Display sidebar tabs as icons only Seitenleisten-Registerkarten nur als Icons anzeigen - + Tabs on Top Registerkarten oben - + Display tabs on top instead of on the left Registerkarten oben anstelle von links anzeigen - + Numerical Labels Numerische Bezeichnungen - + Display numerical labels for otherwise non-labeled LEDs in the LED view Numerische Bezeichnungen für sonst nicht beschriftete LEDs im LED-Bereich anzeigen - + Window Geometry Fenstergeometrie - + Save on Exit Geometrie beim Schließen beibehalten - + Save window geometry on exit Bei Beenden Fenstergeometrie speichern - + X X - + Y Y - + Width Breite - + Height Höhe - + User Interface Benutzeroberfläche - + SMBus Sleep Mode (restart required) SMBus-Schlafmodus (Neustart erforderlich) - + Drivers Treiber - Start Client - Client starten - - - Load Profile - Profil laden - - - Set Server Port - Server Port setzen - - - + Enable Log Console Log Konsole aktivieren - Drivers Settings - Treibereinstellungen - - - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: CPU-Auslastung reduzieren (Programmneustart erfoderlich) - + Custom Arguments Eigene Argumente - Log Manager Settings: - Log Manager Einstellungen: - - - Start at Login Status - Start bei der Anmeldung Status - - - Start at Login Settings: - Start Einstellungen: - - - Open Settings Folder - Einstellungsordner öffnen - - - + Shared SMBus Access (restart required) Gemeinsamer SMBus-Zugriff (Programmneustart erforderlich) - Set Server Host - Setze Server Host - - - + Language Sprache - + Hex Format Hex Format - - A problem occurred enabling Start at Login. - Bei der Aktivierung von "Start bei Anmeldung" ist ein Problem aufgetreten. - English - US Deutsch - - System Default - Systemstandard - Load Profile on Exit @@ -2888,16 +2206,36 @@ Breite: + Load Profile on Service Shutdown + Profil beim Dienstschluss laden + + + + Profile to load when the OpenRGB background service shuts down + Profil, das geladen wird, wenn der OpenRGB-Hintergrunddienst heruntergefahren wird + + + + Load Profile on Service Startup + Profil beim Start des Dienstes laden + + + + Profile to load when the OpenRGB background service starts up + Profil, das geladen wird, wenn der OpenRGB-Hintergrunddienst gestartet wird + + + Load Profile on Suspend Profil beim Anhalten laden - + Profile to load before system enters sleep mode Profil, das geladen wird, bevor das System in den Schlafmodus wechselt - + Profile Manager Profil-Manager diff --git a/qt/i18n/OpenRGB_el_GR.ts b/qt/i18n/OpenRGB_el_GR.ts index 02009b569..6766a290d 100644 --- a/qt/i18n/OpenRGB_el_GR.ts +++ b/qt/i18n/OpenRGB_el_GR.ts @@ -92,7 +92,7 @@ Θύρα: - + No serial ports found Δεν βρέθηκαν σειριακές θύρες @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Κάποια εσωτερικά συσκευές μπορεί να μην ανιχνευθούν:</h2><p>Ένα ή περισσότερα επιπεδίδια διασυνδέσεων I2C ή SMBus απέτυχαν να εκκινηθούν.</p><p><b>Τα μοντέλα RGB DRAM, η εσωτερική φωτιστική συσκευή RGB κάποιων μητρικών πλακέτων και τα κάρτες γραφικών RGB δεν θα είναι διαθέσιμες στο OpenRGB</b> χωρίς I2C ή SMBus.</p><h4>Πώς να το διορθώσετε:</h4><p>Στο Windows, αυτό συμβαίνει συνήθως λόγω αποτυχίας φόρτωσης του διαχειριστή διασυνδέσεων PawnIO.</p><p>Πρέπει πρώτα να εγκαταστήσετε το <a href='https://pawnio.eu/'>PawnIO</a>, μετά πρέπει να ανοίξετε το OpenRGB ως διαχειριστής για να έχετε πρόσβαση σε αυτές τις συσκευές.</p><p>Δείτε το <a href='https://help.openrgb.org/'>help.openrgb.org</a> για περισσότερες βήματα αποσφαλμάτωσης αν συνεχίζετε να βλέπετε αυτό το μήνυμα.<br></p><h3>Αν δεν χρησιμοποιείτε εσωτερικό φωτισμό RGB σε έναν επιπλέον υπολογιστή, αυτό το μήνυμα δεν είναι σημαντικό για εσάς.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Κάποια εσωτερικά συσκευές μπορεί να μην ανιχνευθούν:</h2><p>Ένα ή περισσότερα επιπεδίδια διασυνδέσεις I2C ή SMBus απέτυχαν να εκκινηθούν.</p><p><b>Τα μοντέλα RGB DRAM, η εσωτερική φωτιστική συσκευή RGB κάποιων μητρικών πλακέτων και τα κάρτες γραφικών RGB δεν θα είναι διαθέσιμες στο OpenRGB</b> χωρίς I2C ή SMBus.</p><h4>Πώς να το διορθώσετε:</h4><p>Στο Linux, αυτό συμβαίνει συνήθως επειδή το πρόσθετο i2c-dev δεν φορτώνεται.</p><p>Πρέπει να φορτώσετε το πρόσθετο i2c-dev μαζί με το σωστό πρόσθετο διαχειριστή I2C για τη μητρική πλακέτα σας. Αυτό είναι συνήθως το i2c-piix4 για συστήματα AMD και το i2c-i801 για συστήματα Intel.</p><p>Δείτε <a href='https://help.openrgb.org/'>help.openrgb.org</a> για περισσότερες βήματα αποσφαλμάτωσης αν συνεχίζετε να διαπιστώνετε αυτό το μήνυμα.<br></p><h3>Αν δεν χρησιμοποιείτε εσωτερικό φωτισμό RGB σε έναν επιπλέον υπολογιστή, αυτό το μήνυμα δεν είναι σημαντικό για εσάς.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>ΠΡΟΕΙΔΟΠΟΙΗΣΗ:</h2><p>Οι κανόνες udev του OpenRGB δεν είναι εγκατεστημένοι.</p><p>Η περισσότερη συσκευές δεν θα είναι διαθέσιμες εκτός αν το OpenRGB τρέχει ως root.</p><p>Αν χρησιμοποιείτε εικονικό αρχείο AppImage, Flatpak ή αυτόνομες εκδοχές του OpenRGB, πρέπει να εγκαταστήσετε τους κανόνες udev χειροκίνητα.</p><p>Δείτε <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> για να εγκαταστήσετε τους κανόνες udev χειροκίνητα.</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ΠΡΟΕΙΔΟΠΟΙΗΣΗ:</h2><p>Εγκαταστάθηκαν πολλοί κανόνες udev για το OpenRGB.</p><p>Το αρχείο κανόνων udev 60-openrgb.rules εγκαταστάθηκε και στα δύο /etc/udev/rules.d και /usr/lib/udev/rules.d.</p><p>Πολλά αρχεία κανόνων udev μπορεί να προκαλέσουν σύγκρουση, είναι συνιστώμενο να το αφαιρέσετε από ένα από τα δύο τοπικά συστήματα.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Προειδοποίηση:</h2><p>Ένας ή περισσότεροι διαύλοι I2C/SMBus απέτυχαν να αρχικοποιηθούν.</p><p>Ανάλογα με τους διαύλους που απέτυχαν να αρχικοποιηθούν, ορισμένα μοντέλα RGB DRAM, η ενσωματωμένη φωτιστική λυχνία RGB των μητρικών πλακέτων και οι κάρτες γραφικών RGB μπορεί να μην είναι διαθέσιμες στο OpenRGB.</p><p>Στο Windows, αυτό συμβαίνει συνήθως λόγω αποτυχίας φόρτωσης του διαχειριστή διασύνδεσης PawnIO.</p><p>Για να προσπελάσει τα συσκευές το OpenRGB, πρέπει να εγκαταστήσετε το PawnIO από <a href='https://pawnio.eu/'>https://pawnio.eu</a> και να τρέξετε το OpenRGB ως διαχειριστής ή ως υπηρεσία συστήματος.</p><p>Αν δεν χρησιμοποιείτε κανένα από τα συσκευές που αναφέρονται παραπάνω, μπορείτε να αγνοήσετε αυτό το μήνυμα χωρίς να υπάρχει κανένας κίνδυνος.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Προειδοποίηση:</h2><p>Ένας ή περισσότεροι διασυνδετήρες I2C/SMBus απέτυχαν να εκκινηθούν.</p><p>Ανάλογα με τους διασυνδετήρες που απέτυχαν να εκκινηθούν, ορισμένα μοντέλα RGB DRAM, η ενσωματωμένη φωτιστική RGB των μητρικών πλακέτων και οι κάρτες γραφικών RGB μπορεί να μην είναι διαθέσιμες στο OpenRGB.</p><p>Στο Linux, αυτό συμβαίνει συνήθως επειδή το μοντούλο i2c-dev δεν φορτώνεται.</p><p>Για να προσπελάσει τα συσκευές το OpenRGB, πρέπει να φορτώσετε το μοντούλο i2c-dev μαζί με το σωστό μοντούλο διαχειριστή I2C για τη μητρική πλακέτα σας. Αυτό είναι συνήθως το i2c-piix4 για συστήματα AMD και το i2c-i801 για συστήματα Intel.</p><p>Αν δεν χρησιμοποιείτε κανένα από τα συσκευές που αναφέρονται παραπάνω, μπορείτε να αγνοήσετε αυτό το μήνυμα χωρίς να υπάρχει κανένας κίνδυνος. - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Προειδοποίηση:</h2><p>Οι κανόνες udev του OpenRGB δεν είναι εγκατεστημένοι.</p><p>Η περισσότερη συσκευές δεν θα είναι διαθέσιμες εκτός αν το OpenRGB τρέχει ως root.</p><p>Αν χρησιμοποιείτε εικονικές εφαρμογές AppImage, Flatpak ή αυτοεγκαταστατέες του OpenRGB πρέπει να εγκαταστήσετε τους κανόνες udev χειροκίνητα.</p><p>Δείτε <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> για να εγκαταστήσετε τους κανόνες udev χειροκίνητα.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Προειδοποίηση:</h2><p>Οι κανόνες udev του OpenRGB δεν είναι εγκατεστημένοι.</p><p>Η περισσότερη συσκευές δεν θα είναι διαθέσιμες εκτός αν το OpenRGB τρέχει ως υπηρεσία συστήματος ή ως root.</p><p>Αν χρησιμοποιείτε εκδοχές AppImage, Flatpak ή αυτόνομα του OpenRGB πρέπει να εγκαταστήσετε τους κανόνες udev χειροπιαστά.</p><p>Δείτε <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> για να εγκαταστήσετε τους κανόνες udev χειροπιαστά.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Προειδοποίηση:</h2><p>Εγκαταστάθηκαν πολλοί κανόνες udev για το OpenRGB.</p><p>Το αρχείο κανόνων udev 60-openrgb.rules εγκαταστάθηκε και στα δύο /etc/udev/rules.d και /usr/lib/udev/rules.d.</p><p>Πολλά αρχεία κανόνων udev μπορεί να προκαλέσουν σύγκρουση, είναι συνιστώμενο να το αφαιρέσετε από ένα από τα δύο τοπικά συστήματα.</p> @@ -363,7 +347,7 @@ QMK (πρωτόκολλο VialRGB) - + Serial Device Συσκευή Ακολουθίας @@ -499,44 +483,19 @@ Αποθήκευση σύνδεσης - + Rescan Devices Επανασάρωση συσκευών - + Disconnect Αποσύνδεση - - - OpenRGBDMXSettingsEntry - Name: - Όνομα: - - - Keepalive Time: - Χρόνος διατήρησης: - - - Port: - Θύρα: - - - - OpenRGBDMXSettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Save - Αποθήκευση + + OpenRGB is in local client mode. The local connection may not be disconnected. + Το OpenRGB βρίσκεται σε τοπικό περιβάλλον πελάτη. Η τοπική σύνδεση δεν μπορεί να διακοπεί. @@ -548,44 +507,64 @@ + Device Configuration + Διαμόρφωση Συσκευής + + + + Device Name: + Όνομα Συσκευής: + + + Device-Specific Configuration Διαμόρφωση ειδική για τη συσκευή + + + Reset Device Configuration + Επαναφορά Ρυθμοποίησης Συσκευής + OpenRGBDeviceInfoPage - + Name: Όνομα: - + Vendor: Προμηθευτής: - + Type: Τύπος: - + + Display Name: + Όνομα Εμφάνισης: + + + Description: Περιγραφή: - + Version: Έκδοση: - + Location: Τοποθεσία: - + Serial: Σειριακό: @@ -660,12 +639,12 @@ Edit - + Zone: - Ζώνη: + Επεξεργασία @@ -688,7 +667,7 @@ V: - + Edit Zone Επεξεργασία Ζώνης @@ -709,7 +688,7 @@ - + Save To Device Αποθήκευση σε συσκευή @@ -719,113 +698,133 @@ Εξαδικαδικό: - + Set individual LEDs to static colors. Safe for use with software-driven effects. Ορίστε μεμονωμένα LED σε στατικά χρώματα. Ασφαλές για χρήση με εφέ που οδηγούνται από λογισμικό. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Ορίστε μεμονωμένα LED σε στατικά χρώματα. Δεν είναι ασφαλές για χρήση με εφέ που οδηγούνται από λογισμικό. - + Sets the entire device or a zone to a single color. Ρυθμίζει ολόκληρη τη συσκευή ή μια ζώνη σε ένα μόνο χρώμα. - + Gradually fades between fully off and fully on. Σβήνει σταδιακά μεταξύ πλήρως απενεργοποιημένου και πλήρως ενεργοποιημένου. - + Abruptly changes between fully off and fully on. Αλλάζει απότομα μεταξύ πλήρως απενεργοποιημένου και πλήρως ενεργοποιημένου. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Διατρέχει σταδιακά όλο το φάσμα χρωμάτων. Όλα τα φώτα της συσκευής έχουν το ίδιο χρώμα. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Διατρέχει σταδιακά όλο το φάσμα χρωμάτων. Παράγει ένα μοτίβο ουράνιου τόξου που κινείται. - + Flashes lights when keys or buttons are pressed. Αναβοσβήνει όταν πιέζονται πλήκτρα ή κουμπιά. - - + + Entire Device Ολόκληρη η συσκευή - + Edit Device - + Επεξεργασία Συσκευής - + Entire Zone Ολόκληρη η ζώνη - + Left Αριστερά - + Right Δεξιά - + Up Πάνω - + Down Κάτω - + Horizontal Οριζόντια - + Vertical Κάθετα - + + Up-Left + Αριστερά-Πάνω + + + + Up-Right + Πάνω-Δεξιά + + + + Down-Left + Κάτω-Αριστερά + + + + Down-Right + Κάτω-Δεξιά + + + Saved To Device Αποθηκεύτηκε στη συσκευή - + Saving Not Supported Η αποθήκευση δεν υποστηρίζεται - + All Zones Όλες οι ζώνες - + Mode Specific Συγκεκριμένη λειτουργία - + Entire Segment Ολόκληρο το Τμήμα @@ -864,7 +863,8 @@ - + + Rescan Devices Επανασάρωση συσκευών @@ -877,14 +877,10 @@ - + Delete Profile Διαγραφή προφίλ - - Load Profile - Φόρτωση προφίλ - OpenRGB is detecting devices... @@ -906,167 +902,127 @@ Αποθήκευση προφίλ με προσαρμοσμένο όνομα - + + Show/Hide Εμφάνιση/Απόκρυψη - + + Profiles Προφίλ - + + Quick Colors Γρήγορα χρώματα - + + Red Κόκκινο - + + Yellow Κίτρινο - + + Green Πράσινο - + + Cyan Κυανό - + + Blue Μπλε - + + Magenta Ματζέντα - + + White Λευκό - + + Lights Off Σβηστά φώτα - + + Exit Έξοδος - + Plugins Πρόσθετα - + About OpenRGB Σχετικά με το OpenRGB - + General Settings Γενικές Ρυθμίσεις - + Manually Added Devices Συσκευές που προστέθηκαν χειροκίνητα - DMX Devices - Συσκευές DMX - - - E1.31 Devices - Συσκευές E1.31 - - - Kasa Smart Devices - Συσκευές Kasa Smart - - - Philips Hue Devices - Συσκευές Hue της Philips - - - Philips Wiz Devices - Συσκευές Wiz της Philips - - - OpenRGB QMK Protocol - OpenRGB Πρωτόκολλο QMK - - - Serial Devices - Σειριακές συσκευές - - - Yeelight Devices - Συσκευές Yeelight - - - + SMBus Tools Εργαλεία SMBus - + SDK Client Πρόγραμμα-πελάτης SDK - + SDK Server Διακομιστής SDK - + Do you really want to delete this profile? Θέλετε πραγματικά να διαγράψετε αυτό το προφίλ; - + Log Console Κονσόλα καταγραφής - LIFX Devices - Συσκευές LIFX - - - Nanoleaf Devices - Συσκευές Nanoleaf - - - Elgato KeyLight Devices - Συσκευές Elgato KeyLight - - - Elgato LightStrip Devices - Συσκευές Elgato LightStrip - - - + Supported Devices Υποστηριζόμενες συσκευές - - Software - Λογισμικό - OpenRGBDynamicSettingsWidget @@ -1081,182 +1037,6 @@ Προεπιλογή συστήματος - - OpenRGBE131SettingsEntry - - Start Channel: - Έναρξη καναλιού: - - - Number of LEDs: - Αριθμός LED: - - - Start Universe: - Έναρξη Σύμπαντος: - - - Name: - Όνομα: - - - Matrix Order: - Τάξη μήτρας: - - - Matrix Height: - Ύψος Μήτρας: - - - Matrix Width: - Πλάτος Μήτρας: - - - Type: - Τύπος: - - - IP (Unicast): - IP (μονοεκπομπή): - - - Universe Size: - Μέγεθος Σύμπαντος: - - - Keepalive Time: - Χρόνος διατήρησης: - - - RGB Order: - Διάταξη RGB: - - - Single - Ενιαία - - - Linear - Γραμμικά - - - Matrix - Μήτρα - - - Horizontal Top Left - Οριζόντια Επάνω αριστερά - - - Horizontal Top Right - Οριζόντια Πάνω δεξιά - - - Horizontal Bottom Left - Οριζόντια Κάτω αριστερά - - - Horizontal Bottom Right - Οριζόντια Κάτω Δεξιά - - - Vertical Top Left - Κάθετα Επάνω αριστερά - - - Vertical Top Right - Κάθετα Επάνω δεξιά - - - Vertical Bottom Left - Κάθετα κάτω αριστερά - - - Vertical Bottom Right - Κάθετα κάτω δεξιά - - - - OpenRGBE131SettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Save - Αποθήκευση - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Save - Αποθήκευση - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Save - Αποθήκευση - - - - OpenRGBGoveeSettingsEntry - - IP: - IP: - - - - OpenRGBGoveeSettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Save - Αποθήκευση - - OpenRGBHardwareIDsDialog @@ -1285,58 +1065,6 @@ Αριθμοί Αναγνωριστικών Υλικού - - OpenRGBKasaSmartSettingsEntry - - IP: - IP: - - - Name - Όνομα - - - - OpenRGBKasaSmartSettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Save - Αποθήκευση - - - - OpenRGBLIFXSettingsEntry - - IP: - IP: - - - Name - Όνομα - - - - OpenRGBLIFXSettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Save - Αποθήκευση - - OpenRGBLogConsolePage @@ -1373,131 +1101,6 @@ Πλάτος: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - Νέα συσκευή Nanoleaf - - - IP address: - Διεύθυνση IP: - - - Port: - Θύρα: - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP: - - - Port: - Θύρα: - - - Auth Key: - Κλειδί εξουσιοδότησης: - - - Unpair - Απόζευξη - - - Pair - Ζεύξη - - - - OpenRGBNanoleafSettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Scan - Σάρωση - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - Για να πραγματοποιήσετε ζεύξη, κρατήστε πατημένο το κουμπί on-off για 5-7 δευτερόλεπτα έως ότου η λυχνία LED αρχίσει να αναβοσβήνει σε ένα μοτίβο και, στη συνέχεια, πατήστε το κουμπί "Ζεύξη" εντός 30 δευτερολέπτων. - - - - OpenRGBPhilipsHueSettingsEntry - - IP: - IP: - - - Entertainment Mode: - Λειτουργία διασκέδασης: - - - Username: - Όνομα χρήστη: - - - Client Key: - Κλειδί πελάτη: - - - Unpair Bridge - Απόζευξη γέφυρας - - - MAC: - MAC: - - - Auto Connect Group: - Ομάδα αυτόματης σύνδεσης: - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Αφαίρεση - - - Add - Προσθήκη - - - Save - Αποθήκευση - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP: - - - - OpenRGBPhilipsWizSettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Save - Αποθήκευση - - OpenRGBPluginsEntry @@ -1540,10 +1143,6 @@ API Version: Έκδοση API: - - API Version Value - Τιμή Έκδοσης API - OpenRGBPluginsPage @@ -1554,7 +1153,7 @@ - + Remove Plugin Αφαίρεση πρόσθετου @@ -1564,37 +1163,37 @@ <html><head/><body>Ψάχνετε για πρόσθετα; Δείτε την επίσημη λίστα στη διεύθυνση <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Εγκαταστήστε το πρόσθετο OpenRGB - + Plugin files (*.dll *.dylib *.so *.so.*) Αρχεία πρόσθετων (*.dll *.dylib *.so *.so.*) - + Replace Plugin Αντικατάσταση πρόσθετου - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Ένα πρόσθετο με αυτό το όνομα αρχείου είναι ήδη εγκατεστημένο. Είστε σίγουροι ότι θέλετε να αντικαταστήσετε αυτό το πρόσθετο; - + Are you sure you want to remove this plugin? Είστε σίγουροι ότι θέλετε να αφαιρέσετε αυτό το πρόσθετο; - + Restart Needed Απαιτείται Επανεκκίνηση - + The plugin will be fully removed after restarting OpenRGB. Το πρόσθετο θα αφαιρεθεί πλήρως μετά την επανεκκίνηση του OpenRGB. @@ -1661,10 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - Όνομα προφίλ - Profile Selection @@ -1681,36 +1276,6 @@ Δημιουργία νέου προφίλ: - - OpenRGBQMKORGBSettingsEntry - - Name: - Όνομα: - - - USB PID: - USB PID: - - - USB VID: - USB VID: - - - - OpenRGBQMKORGBSettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Save - Αποθήκευση - - OpenRGBSegmentExportDialog @@ -1739,44 +1304,6 @@ Όνομα Συσκευής (Προαιρετικό): - - OpenRGBSerialSettingsEntry - - Baud: - Baud: - - - Name: - Όνομα: - - - Number of LEDs: - Αριθμός LED: - - - Port: - Θύρα: - - - Protocol: - Πρωτόκολλο: - - - - OpenRGBSerialSettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Save - Αποθήκευση - - OpenRGBServerInfoPage @@ -1896,14 +1423,6 @@ Website: Ιστοσελίδα: - - <a href="https://openrgb.org">https://openrgb.org</a> - <a href="https://openrgb.org">https://openrgb.org</a> - - - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - SDK Version: @@ -2010,10 +1529,6 @@ Address: Διεύθυνση: - - Read Device - Αναγνώριση συσκευής - SMBus Dumper: @@ -2066,10 +1581,6 @@ Dump Device Συσκευή απόρριψης - - SMBus Reader: - Αναγνώστης SMBus: - Addr: @@ -2086,58 +1597,8 @@ Μέγεθος: - - OpenRGBYeelightSettingsEntry - - IP: - IP: - - - ? - ; - - - Music Mode: - Λειτουργία μουσικής: - - - Override host IP: - Παράκαμψη της IP του υποδοχέα: - - - Left blank for auto discovering host ip - Αφήνεται κενό για αυτόματη ανακάλυψη της ip του κεντρικού υπολογιστή - - - Choose an IP... - Επιλογή IP... - - - Choose the correct IP for the host - Επιλέξτε τη σωστή IP για τον υποδοχέα - - - - OpenRGBYeelightSettingsPage - - Add - Προσθήκη - - - Remove - Αφαίρεση - - - Save - Αποθήκευση - - OpenRGBZoneEditorDialog - - Resize Zone - Επαναπροσδιορισμός μεγέθους ζώνης - Add Segment @@ -2247,10 +1708,6 @@ Ignore Αγνόηση - - Resize the zones - Αλλαγή μεγέθους των ζωνών - Controller @@ -2427,7 +1884,7 @@ Θύρα: - + No serial ports found Δεν βρέθηκαν σειριακές θύρες @@ -2435,345 +1892,285 @@ Settings - + Load Window Geometry Φόρτωση γεωμετρίας παραθύρου - 90000 - 90000 - - - + Run Zone Checks on Rescan Εκτέλεση ελέγχων ζώνης κατά την εκ νέου σάρωση - Start Server - Εκκίνηση διακομιστή - - - + Start Minimized Ελαχιστοποιημένη εκκίνηση - User Interface Settings: - Ρυθμίσεις διεπαφής χρήστη: - - - + Start at Login Εκκίνηση κατά την είσοδο - + Minimize on Close Ελαχιστοποίηση στο κλείσιμο - + Numerical Labels Αριθμητικοί Επιγραμματισμοί - + Display numerical labels for otherwise non-labeled LEDs in the LED view Εμφάνιση αριθμητικών ετικετών για LED που διαφορετικά δεν έχουν ετικέτα στην προβολή LED - + Window Geometry Γεωμετρία Παραθύρου - + Save on Exit Αποθήκευση γεωμετρίας στο κλείσιμο - Start Client - Έναρξη πελάτη - - - Load Profile - Φόρτωση Προφίλ - - - Set Server Port - Ορισμός θύρας διακομιστή - - - + HID Safe Mode Λειτουργία ασφαλούς κατάστασης HID - + Use an alternate method for detecting HID devices Χρήση εναλλακτικής μεθόδου για την ανίχνευση συσκευών HID - + Initial Detection Delay (ms) Αρχική καθυστέρηση ανίχνευσης (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started Η ποσότητα του χρόνου, σε χιλιοστά δευτερολέπτων, που πρέπει να περιμένετε πριν από την ανίχνευση συσκευών όταν ξεκινήσετε - + Detection Ανίχνευση - + Enable Log Console Ενεργοποίηση της κονσόλας καταγραφής - + Log Level Επίπεδο Καταγραφής - + Log File Count Limit Όριο αριθμού αρχείων καταγραφής - + Maximum number of log files to keep, 0 for no limit Μέγιστος αριθμός αρχείων καταγραφής που θα διατηρηθούν, 0 για απενεργοποίηση του όριου - + Log Manager Διαχειριστής Καταγραφών - + Serve All Controllers Εξυπηρέτηση Όλων των Προωθητών - + Include controllers provided by client connections and plugins Περιλαμβάνετε τους ελεγκτές που παρέχονται από τις συνδέσεις πελατών και τα πρόσθετα - + Default Host Προεπιλεγμένος Παραγωγός - + Default Port Προεπιλεγμένη θύρα - + Legacy Workaround Παλαιότερη λύση αντιμετώπισης - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Περιέλευση για κάποιες παλαιότερες υλοποιήσεις SDK που στέλνουν λανθασμένο μέγεθος πακέτου για ορισμένα πακέτα - + Server Διακομιστής - + Custom Arguments Προσαρμοσμένα κριτήρια - Log Manager Settings: - Ρυθμίσεις διαχειριστή αρχείων καταγραφής: - - - Start at Login Status - Έναρξη από την κατάσταση σύνδεσης - - - Start at Login Settings: - Έναρξη στις Ρυθμίσεις σύνδεσης: - - - Open Settings Folder - Άνοιγμα φακέλου ρυθμίσεων - - - Drivers Settings - Ρυθμίσεις οδηγών - - - + Monochrome Tray Icon Εικονίδιο γράμμης εργάσιων σε κλίμακα του γκρι - + Save window geometry on exit Αποθήκευση της γεωμετρίας του παραθύρου κατά την έξοδο - + X Χ - + Y Y - + Width Πλάτος - + Height Ύψος - + User Interface Διεπαφή Χρήστη - + SMBus Sleep Mode (restart required) Λειτουργία ύπνου SMBus (απαιτείται επανεκκίνηση) - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: Μείωση της χρήσης CPU (απαιτείται επανεκκίνηση) - Set Profile on Exit - Ορισμός προφίλ κατά την έξοδο - - - + Shared SMBus Access (restart required) Κοινή πρόσβαση SMBus (απαιτείται επανεκκίνηση) - Set Server Host - Ορισμός υποδοχής διακομιστή - - - + Language Γλώσσα - + Disable Key Expansion Απενεργοποίηση Επέκτασης Πλήκτρων - + Hex Format Η εξαδικαδική μορφή - + Enable Start at Login Ενεργοποίηση εκκίνησης κατά τη σύνδεση - + Start OpenRGB on login Εκκίνηση του OpenRGB κατά τη σύνδεση - + Start minimized to the system tray Έναρξη ελαχιστοποιημένο στη λειτουργική κασέτα - + Additional command line arguments to pass to OpenRGB when starting on login Πρόσθετοι παράμετροι γραμμής εντολών που πρέπει να παραχωρηθούν στο OpenRGB όταν ξεκινά με την είσοδο - + Language for the user interface Γλώσσα για την περιγραφή της διεπαφής - + Keep OpenRGB active in the system tray when closing the main window Παραμένει το OpenRGB ενεργό στη λειτουργική κασέτα του συστήματος όταν κλείνετε το κύριο παράθυρο - + Use a monochrome icon in the system tray instead of a full color icon Χρήση μονόχρωμου εικονιδίου στη λειτουργική κασέτα αντί για ένα εικονίδιο πλήρους χρώματος - + Select #BBGGRR or #RRGGBB format for hex display and input Επιλέξτε τη μορφή #BBGGRR ή #RRGGBB για την εξόδο και την εισαγωγή σε δεκαεξαδικό - + Compact Tabs Συμπαγείς Καρτέλες - + Display sidebar tabs as icons only Εμφάνιση των καρτελών πλευρικής γραμμής ως εικονίδια μόνο - + Tabs on Top Καρτέλες στην Κορυφή - + Display tabs on top instead of on the left Εμφάνιση καρτελών πάνω αντί για αριστερά - + Show LED View by Default Εμφάνιση προεπιλεγμένα της προβολής LED - + Drivers Οδηγοί - + Enable Log File Ενεργοποίηση αρχείου καταγραφής - - A problem occurred enabling Start at Login. - Παρουσιάστηκε πρόβλημα με την ενεργοποίηση της εκκίνησης κατά την είσοδο. - English - US Ελληνικά - - System Default - Προεπιλογή συστήματος - Load Profile on Exit @@ -2806,16 +2203,36 @@ + Load Profile on Service Shutdown + Φόρτωση προφίλ κατά την απενεργοποίηση του υπηρεσιιιακού προγράμματος + + + + Profile to load when the OpenRGB background service shuts down + Το προφίλ που θα φορτωθεί όταν το υπηρεσιακό πρόγραμμα παρασκευής υπόβαθρου OpenRGB σταματήσει + + + + Load Profile on Service Startup + Φόρτωση προφίλ κατά την εκκίνηση του υπηρεσίας + + + + Profile to load when the OpenRGB background service starts up + Το προφίλ που θα φορτωθεί όταν το υπηρεσιακό πρόγραμμα παρασκευής υπόβαθρου OpenRGB ξεκινήσει + + + Load Profile on Suspend Φόρτωση προφίλ κατά την αναστολή - + Profile to load before system enters sleep mode Προφίλ που θα φορτωθεί πριν το σύστημα περάσει σε λειτουργία ύπνου - + Profile Manager Διαχειριστής Προφίλ diff --git a/qt/i18n/OpenRGB_en_AU.ts b/qt/i18n/OpenRGB_en_AU.ts index 854651a7a..e08c5e800 100644 --- a/qt/i18n/OpenRGB_en_AU.ts +++ b/qt/i18n/OpenRGB_en_AU.ts @@ -92,7 +92,7 @@ - + No serial ports found @@ -158,24 +158,24 @@ DetectionManager - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> - + - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> - + - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - + @@ -322,7 +322,7 @@ ManualDevice - + Serial Device @@ -483,15 +483,20 @@ - + Rescan Devices - + Disconnect + + + OpenRGB is in local client mode. The local connection may not be disconnected. + + OpenRGBDeviceEditorDialog @@ -502,44 +507,64 @@ + Device Configuration + + + + + Device Name: + + + + Device-Specific Configuration + + + Reset Device Configuration + + OpenRGBDeviceInfoPage - + Name: - + Vendor: - + Type: - + + Display Name: + + + + Description: - + Version: - + Location: - + Serial: @@ -642,7 +667,7 @@ - + Edit Zone @@ -663,7 +688,7 @@ - + Save To Device @@ -673,113 +698,133 @@ - + Set individual LEDs to static colors. Safe for use with software-driven effects. Set individual LEDs to static colours. Safe for use with software-driven effects. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Set individual LEDs to static colours. Not safe for use with software-driven effects. - + Sets the entire device or a zone to a single color. Sets the entire device or a zone to a single colour. - + Gradually fades between fully off and fully on. - + Abruptly changes between fully off and fully on. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Gradually cycles through the entire colour spectrum. All lights on the device are the same colour. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Gradually cycles through the entire colour spectrum. Produces a rainbow pattern that moves. - + Flashes lights when keys or buttons are pressed. - - + + Entire Device - + Edit Device - + Entire Zone - + Left - + Right - + Up - + Down - + Horizontal - + Vertical - + + Up-Left + + + + + Up-Right + + + + + Down-Left + + + + + Down-Right + + + + Saved To Device - + Saving Not Supported - + All Zones - + Mode Specific - + Entire Segment @@ -818,7 +863,8 @@ - + + Rescan Devices @@ -831,7 +877,7 @@ - + Delete Profile @@ -856,112 +902,124 @@ - + + Show/Hide - + + Profiles - + + Quick Colors Quick Colours - + + Red - + + Yellow - + + Green - + + Cyan - + + Blue - + + Magenta - + + White - + + Lights Off - + + Exit - + Plugins - + About OpenRGB - + Supported Devices - + General Settings - + Manually Added Devices - + SMBus Tools - + SDK Client - + SDK Server - + Do you really want to delete this profile? - + Log Console @@ -1095,7 +1153,7 @@ - + Remove Plugin @@ -1105,37 +1163,37 @@ - + Install OpenRGB Plugin - + Replace Plugin - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? - + Are you sure you want to remove this plugin? - + Plugin files (*.dll *.dylib *.so *.so.*) - + Restart Needed - + The plugin will be fully removed after restarting OpenRGB. @@ -1486,12 +1544,12 @@ Mode: - + Write Data: - + @@ -1501,12 +1559,12 @@ SMBus Commands: - + Perform Command - + @@ -1826,7 +1884,7 @@ - + No serial ports found @@ -1834,277 +1892,277 @@ Settings - + Load Window Geometry - + Run Zone Checks on Rescan - + Start Minimized Start Minimised - + Minimize on Close Minimise On Close - + Numerical Labels - + Display numerical labels for otherwise non-labeled LEDs in the LED view - + Window Geometry - + Save on Exit - + HID Safe Mode - + Use an alternate method for detecting HID devices - + Initial Detection Delay (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started - + Detection - + Enable Log Console - + Log Level - + Log File Count Limit - + Maximum number of log files to keep, 0 for no limit - + Log Manager - + Serve All Controllers - + Include controllers provided by client connections and plugins - + Default Host - + Default Port - + Legacy Workaround - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets - + Server - + Custom Arguments - + Monochrome Tray Icon - + Save window geometry on exit - + X - + Y - + Width - + Height - + User Interface - + SMBus Sleep Mode (restart required) - + AMD SMBus: Reduce CPU Usage (restart required) - + Shared SMBus Access (restart required) - + Language - + Disable Key Expansion - + Hex Format - + Enable Start at Login - + Start OpenRGB on login - + Start minimized to the system tray - + Additional command line arguments to pass to OpenRGB when starting on login - + Start at Login - + Language for the user interface - + Keep OpenRGB active in the system tray when closing the main window - + Use a monochrome icon in the system tray instead of a full color icon Use a monochrome icon in the system tray instead of a full colour icon - + Select #BBGGRR or #RRGGBB format for hex display and input - + Compact Tabs - + Display sidebar tabs as icons only - + Tabs on Top - + Display tabs on top instead of on the left - + Show LED View by Default - + Drivers - + Enable Log File @@ -2145,16 +2203,36 @@ - Load Profile on Suspend + Load Profile on Service Shutdown - Profile to load before system enters sleep mode + Profile to load when the OpenRGB background service shuts down + Load Profile on Service Startup + + + + + Profile to load when the OpenRGB background service starts up + + + + + Load Profile on Suspend + + + + + Profile to load before system enters sleep mode + + + + Profile Manager diff --git a/qt/i18n/OpenRGB_en_GB.ts b/qt/i18n/OpenRGB_en_GB.ts index c7b5ab1c4..a1cfb9d99 100644 --- a/qt/i18n/OpenRGB_en_GB.ts +++ b/qt/i18n/OpenRGB_en_GB.ts @@ -92,7 +92,7 @@ - + No serial ports found @@ -158,24 +158,24 @@ DetectionManager - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> - + - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> - + - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - + @@ -322,7 +322,7 @@ ManualDevice - + Serial Device @@ -483,15 +483,20 @@ - + Rescan Devices - + Disconnect + + + OpenRGB is in local client mode. The local connection may not be disconnected. + + OpenRGBDeviceEditorDialog @@ -502,44 +507,64 @@ + Device Configuration + + + + + Device Name: + + + + Device-Specific Configuration + + + Reset Device Configuration + + OpenRGBDeviceInfoPage - + Name: - + Vendor: - + Type: - + + Display Name: + + + + Description: - + Version: - + Location: - + Serial: @@ -642,7 +667,7 @@ - + Edit Zone @@ -663,7 +688,7 @@ - + Save To Device @@ -673,113 +698,133 @@ - + Set individual LEDs to static colors. Safe for use with software-driven effects. Set individual LEDs to static colours. Safe for use with software-driven effects. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Set individual LEDs to static colours. Not safe for use with software-driven effects. - + Sets the entire device or a zone to a single color. Sets the entire device or a zone to a single colour. - + Gradually fades between fully off and fully on. - + Abruptly changes between fully off and fully on. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Gradually cycles through the entire colour spectrum. All lights on the device are the same colour. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Gradually cycles through the entire colour spectrum. Produces a rainbow pattern that moves. - + Flashes lights when keys or buttons are pressed. - - + + Entire Device - + Edit Device - + Entire Zone - + Left - + Right - + Up - + Down - + Horizontal - + Vertical - + + Up-Left + + + + + Up-Right + + + + + Down-Left + + + + + Down-Right + + + + Saved To Device - + Saving Not Supported - + All Zones - + Mode Specific - + Entire Segment @@ -818,7 +863,8 @@ - + + Rescan Devices @@ -831,7 +877,7 @@ - + Delete Profile @@ -856,112 +902,124 @@ - + + Show/Hide - + + Profiles - + + Quick Colors Quick Colours - + + Red - + + Yellow - + + Green - + + Cyan - + + Blue - + + Magenta - + + White - + + Lights Off - + + Exit - + Plugins - + About OpenRGB - + Supported Devices - + General Settings - + Manually Added Devices - + SMBus Tools - + SDK Client - + SDK Server - + Do you really want to delete this profile? - + Log Console @@ -1095,7 +1153,7 @@ - + Remove Plugin @@ -1105,37 +1163,37 @@ - + Install OpenRGB Plugin - + Replace Plugin - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? - + Are you sure you want to remove this plugin? - + Plugin files (*.dll *.dylib *.so *.so.*) - + Restart Needed - + The plugin will be fully removed after restarting OpenRGB. @@ -1486,12 +1544,12 @@ Mode: - + Write Data: - + @@ -1501,12 +1559,12 @@ SMBus Commands: - + Perform Command - + @@ -1826,7 +1884,7 @@ - + No serial ports found @@ -1834,277 +1892,277 @@ Settings - + Load Window Geometry - + Run Zone Checks on Rescan - + Start Minimized Start Minimised - + Minimize on Close Minimise On Close - + Numerical Labels - + Display numerical labels for otherwise non-labeled LEDs in the LED view - + Window Geometry - + Save on Exit - + HID Safe Mode - + Use an alternate method for detecting HID devices - + Initial Detection Delay (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started - + Detection - + Enable Log Console - + Log Level - + Log File Count Limit - + Maximum number of log files to keep, 0 for no limit - + Log Manager - + Serve All Controllers - + Include controllers provided by client connections and plugins - + Default Host - + Default Port - + Legacy Workaround - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets - + Server - + Custom Arguments - + Monochrome Tray Icon - + Save window geometry on exit - + X - + Y - + Width - + Height - + User Interface - + SMBus Sleep Mode (restart required) - + AMD SMBus: Reduce CPU Usage (restart required) - + Shared SMBus Access (restart required) - + Language - + Disable Key Expansion - + Hex Format - + Enable Start at Login - + Start OpenRGB on login - + Start minimized to the system tray - + Additional command line arguments to pass to OpenRGB when starting on login - + Start at Login - + Language for the user interface - + Keep OpenRGB active in the system tray when closing the main window - + Use a monochrome icon in the system tray instead of a full color icon Use a monochrome icon in the system tray instead of a full colour icon - + Select #BBGGRR or #RRGGBB format for hex display and input - + Compact Tabs - + Display sidebar tabs as icons only - + Tabs on Top - + Display tabs on top instead of on the left - + Show LED View by Default - + Drivers - + Enable Log File @@ -2145,16 +2203,36 @@ - Load Profile on Suspend + Load Profile on Service Shutdown - Profile to load before system enters sleep mode + Profile to load when the OpenRGB background service shuts down + Load Profile on Service Startup + + + + + Profile to load when the OpenRGB background service starts up + + + + + Load Profile on Suspend + + + + + Profile to load before system enters sleep mode + + + + Profile Manager diff --git a/qt/i18n/OpenRGB_en_US.ts b/qt/i18n/OpenRGB_en_US.ts index 71d85e9e7..d73a946bd 100644 --- a/qt/i18n/OpenRGB_en_US.ts +++ b/qt/i18n/OpenRGB_en_US.ts @@ -92,7 +92,7 @@ - + No serial ports found @@ -158,24 +158,24 @@ DetectionManager - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> - + - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> - + - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - + @@ -322,7 +322,7 @@ ManualDevice - + Serial Device @@ -483,15 +483,20 @@ - + Rescan Devices - + Disconnect + + + OpenRGB is in local client mode. The local connection may not be disconnected. + + OpenRGBDeviceEditorDialog @@ -502,44 +507,64 @@ + Device Configuration + + + + + Device Name: + + + + Device-Specific Configuration + + + Reset Device Configuration + + OpenRGBDeviceInfoPage - + Name: - + Vendor: - + Type: - + + Display Name: + + + + Description: - + Version: - + Location: - + Serial: @@ -642,7 +667,7 @@ - + Edit Zone @@ -663,7 +688,7 @@ - + Save To Device @@ -673,113 +698,133 @@ - + Set individual LEDs to static colors. Safe for use with software-driven effects. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. - + Sets the entire device or a zone to a single color. - + Gradually fades between fully off and fully on. - + Abruptly changes between fully off and fully on. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. - + Flashes lights when keys or buttons are pressed. - - + + Entire Device - + Edit Device - + Entire Zone - + Left - + Right - + Up - + Down - + Horizontal - + Vertical - + + Up-Left + + + + + Up-Right + + + + + Down-Left + + + + + Down-Right + + + + Saved To Device - + Saving Not Supported - + All Zones - + Mode Specific - + Entire Segment @@ -818,7 +863,8 @@ - + + Rescan Devices @@ -831,7 +877,7 @@ - + Delete Profile @@ -856,112 +902,124 @@ - + + Show/Hide - + + Profiles - + + Quick Colors - + + Red - + + Yellow - + + Green - + + Cyan - + + Blue - + + Magenta - + + White - + + Lights Off - + + Exit - + Plugins - + About OpenRGB - + Supported Devices - + General Settings - + Manually Added Devices - + SMBus Tools - + SDK Client - + SDK Server - + Do you really want to delete this profile? - + Log Console @@ -1095,7 +1153,7 @@ - + Remove Plugin @@ -1105,37 +1163,37 @@ - + Install OpenRGB Plugin - + Plugin files (*.dll *.dylib *.so *.so.*) - + Replace Plugin - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? - + Are you sure you want to remove this plugin? - + Restart Needed - + The plugin will be fully removed after restarting OpenRGB. @@ -1486,12 +1544,12 @@ Mode: - + Write Data: - + @@ -1501,12 +1559,12 @@ SMBus Commands: - + Perform Command - + @@ -1826,7 +1884,7 @@ - + No serial ports found @@ -1834,277 +1892,277 @@ Settings - + Load Window Geometry - + Run Zone Checks on Rescan - + Start Minimized - + Minimize on Close - + Numerical Labels - + Display numerical labels for otherwise non-labeled LEDs in the LED view - + Window Geometry - + Save on Exit - + HID Safe Mode - + Use an alternate method for detecting HID devices - + Initial Detection Delay (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started - + Detection - + Enable Log Console - + Log Level - + Log File Count Limit - + Maximum number of log files to keep, 0 for no limit - + Log Manager - + Serve All Controllers - + Include controllers provided by client connections and plugins - + Default Host - + Default Port - + Legacy Workaround - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets - + Server - + Custom Arguments - + Monochrome Tray Icon - + Save window geometry on exit - + X - + Y - + Width - + Height - + User Interface - + SMBus Sleep Mode (restart required) - + AMD SMBus: Reduce CPU Usage (restart required) - + Shared SMBus Access (restart required) - + Language - + Disable Key Expansion - + Hex Format - + Enable Start at Login - + Start OpenRGB on login - + Start minimized to the system tray - + Additional command line arguments to pass to OpenRGB when starting on login - + Start at Login - + Language for the user interface - + Keep OpenRGB active in the system tray when closing the main window - + Use a monochrome icon in the system tray instead of a full color icon - + Select #BBGGRR or #RRGGBB format for hex display and input - + Compact Tabs - + Display sidebar tabs as icons only - + Tabs on Top - + Display tabs on top instead of on the left - + Show LED View by Default - + Drivers - + Enable Log File @@ -2145,16 +2203,36 @@ - Load Profile on Suspend + Load Profile on Service Shutdown - Profile to load before system enters sleep mode + Profile to load when the OpenRGB background service shuts down + Load Profile on Service Startup + + + + + Profile to load when the OpenRGB background service starts up + + + + + Load Profile on Suspend + + + + + Profile to load before system enters sleep mode + + + + Profile Manager diff --git a/qt/i18n/OpenRGB_es_ES.ts b/qt/i18n/OpenRGB_es_ES.ts index 096e2ec93..6b29a0ade 100644 --- a/qt/i18n/OpenRGB_es_ES.ts +++ b/qt/i18n/OpenRGB_es_ES.ts @@ -92,7 +92,7 @@ Puerto: - + No serial ports found No se encontraron puertos seriales @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Algunos dispositivos internos pueden no detectarse:</h2><p>Uno o más interfaces I2C o SMBus no se pudieron inicializar.</p><p><b>Los módulos RGB DRAM, la iluminación RGB integrada en algunas placas base y las tarjetas gráficas RGB no estarán disponibles en OpenRGB</b> sin I2C o SMBus.</p><h4>Cómo solucionar esto:</h4><p>En Windows, esto suele ser causado por un fallo al cargar el controlador PawnIO.</p><p>Primero debe instalar <a href='https://pawnio.eu/'>PawnIO</a>, luego debe abrir OpenRGB como administrador para acceder a estos dispositivos.</p><p>Consulte <a href='https://help.openrgb.org/'>help.openrgb.org</a> para obtener pasos adicionales de solución de problemas si sigue viendo este mensaje.<br></p><h3>Si no está utilizando RGB interno en un escritorio, este mensaje no es importante para usted.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Algunos dispositivos internos pueda que no sean detectados:</h2><p>Uno o mas I2C o SMBus interfaz fallaron a iniciar.</p><p><b>RGB DRAM modulos, algunas placas' RGB luces integradas, y Tarjetas De Graficas RGB, no serán disponible OpenRGB</b> sin I2C o SMBus.</p><h4>Como reparar esto:</h4><p>en Linux, esto es usualmente porque i2c-dev modul no esta cargado.</p><p>Tu tienes que cargar i2c-dev modulo a largo con el i2c controlador(driver) para tu placa. Esto usualmentees i2c-piix4 para sytemas AMD y i2c-i801 para systemas Intel.</p><p>Ver <a href='https://help.openrgb.org/'>help.openrgb.org</a> Para pasos adicionales para solucion de probemas si sigues viendo este mensaje.<br></p><h3>Si no estas usando RGB internal en tu computadora este mensaje no es importante para ti.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>AVISO:</h2><p>The OpenRGB Las udev reglas no estan instaladas.</p><p>La mayoria de despositivos no estaran disponible a menos que OpenRGB se corra en root.</p><p>Si estan usando AppImage, Flatpak, o una version de OpenRGB compilada por uno mismo debes de installar las reglas udev manualmentey</p><p>Ver <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> para installar las reglas udev manualy</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>AVISO:</h2><p>Multiple OpenRGB Las reglas udev estan instaladas.</p><p>El archivo de reglas udev Reglas 60-openrgb.estan instalados en ambos /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiples reglas udev pueden causar conflictos, es recomendado remover uno de ellos.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Advertencia:</h2><p>Uno o más interfaces I2C/SMBus no se pudieron inicializar.</p><p>Dependiendo de qué interfaces no se pudieron inicializar, algunos módulos de DRAM RGB, la iluminación RGB integrada en algunas placas base y tarjetas gráficas RGB pueden no estar disponibles en OpenRGB.</p><p>En Windows, esto suele ser causado por un fallo al cargar el controlador PawnIO.</p><p>Para que OpenRGB pueda acceder a estos dispositivos, debe instalar PawnIO desde <a href='https://pawnio.eu/'>https://pawnio.eu</a> y ejecutar OpenRGB como administrador o como un servicio del sistema.</p><p>Si no está utilizando ninguno de los dispositivos mencionados anteriormente, puede ignorar este mensaje con seguridad.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Advertencia:</h2><p>Uno o más interfaces I2C/SMBus no se pudieron inicializar.</p><p>Dependiendo de qué interfaces no se pudieron inicializar, algunos módulos de DRAM RGB, la iluminación RGB integrada en algunas placas base y tarjetas gráficas RGB pueden no estar disponibles en OpenRGB.</p><p>En Linux, esto suele deberse a que el módulo i2c-dev no está cargado.</p><p>Para que OpenRGB pueda acceder a estos dispositivos, debe cargar el módulo i2c-dev junto con el módulo correcto del controlador I2C para su placa base. Esto suele ser i2c-piix4 para sistemas AMD e i2c-i801 para sistemas Intel.</p><p>Si no está utilizando ninguno de los dispositivos mencionados anteriormente, puede ignorar este mensaje con seguridad.</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Advertencia:</h2><p>Las reglas udev de OpenRGB no están instaladas.</p><p>La mayoría de los dispositivos no estarán disponibles a menos que se ejecute OpenRGB como root.</p><p>Si está utilizando versiones AppImage, Flatpak o compiladas manualmente de OpenRGB, debe instalar las reglas udev manualmente.</p><p>Consulte <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> para instalar las reglas udev manualmente.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Advertencia:</h2><p>Las reglas udev de OpenRGB no están instaladas.</p><p>La mayoría de los dispositivos no estarán disponibles a menos que se ejecute OpenRGB como un servicio del sistema o como root.</p><p>Si está utilizando versiones de AppImage, Flatpak o compiladas manualmente de OpenRGB, debe instalar las reglas udev manualmente.</p><p>Consulte <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> para instalar las reglas udev manualmente.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Advertencia:</h2><p>Están instaladas múltiples reglas udev de OpenRGB.</p><p>El archivo de reglas udev 60-openrgb.rules está instalado tanto en /etc/udev/rules.d como en /usr/lib/udev/rules.d.</p><p>Varias reglas udev pueden entrar en conflicto, se recomienda eliminar uno de ellos.</p> @@ -363,7 +347,7 @@ QMK (Protocolo VialRGB) - + Serial Device Dispositivo Serial @@ -499,60 +483,19 @@ Guardar conexión - + Rescan Devices Escanear dispositivos - + Disconnect Desconectar - - - OpenRGBDMXSettingsEntry - Brightness Channel: - OpenRGBDMX Adjustes de entrada al Ui - - - Blue Channel: - Canal Azul - - - Name: - Nombre: - - - Green Channel: - Canal Verde - - - Red Channel: - Canal Rojo - - - Keepalive Time: - Periodo de recordatorio: - - - Port: - Puerto - - - - OpenRGBDMXSettingsPage - - Add - Añadir - - - Remove - Suprimir - - - Save - Guardar + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB está en modo cliente local. La conexión local puede no poder desconectarse. @@ -564,44 +507,64 @@ + Device Configuration + Configuración del dispositivo + + + + Device Name: + Nombre del dispositivo: + + + Device-Specific Configuration Configuración específica del dispositivo + + + Reset Device Configuration + Restablecer la configuración del dispositivo + OpenRGBDeviceInfoPage - + Name: Nombre: - + Vendor: Fabricante: - + Type: Tipo: - + + Display Name: + Nombre de visualización: + + + Description: Descripción: - + Version: Versión: - + Location: Ubicación: - + Serial: Número de serie: @@ -699,7 +662,7 @@ V: - + Edit Zone Editar Zona @@ -720,7 +683,7 @@ - + Save To Device Guardar en dispositivo @@ -735,113 +698,133 @@ Editar - + Set individual LEDs to static colors. Safe for use with software-driven effects. Aplicar colores estáticos a LEDs individualmente. Compatible con los efectos generados en software. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Aplicar colores estáticos a LEDs individualmente. No compatible con los efectos generados en software. - + Sets the entire device or a zone to a single color. Aplica un color a una zona o a todo el dispositivo. - + Gradually fades between fully off and fully on. Alterna gradualmente entre apagado y encendido. - + Abruptly changes between fully off and fully on. Alterna bruscamente entre apagado y encendido. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Rotación entre todos los colores del espectro. Produce un patrón de arcoíris estático. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Rotación entre todos los colores del espectro. Produce un patrón de arcoíris que se mueve. - + Flashes lights when keys or buttons are pressed. Produce destellos de luz al apretar teclas o botones. - - + + Entire Device Dispositivo entero - + Edit Device - + Editar dispositivo - + Entire Zone Zona entera - + Left Izquierda - + Right Derecha - + Up Arriba - + Down Abajo - + Horizontal Horizontal - + Vertical Vertical - + + Up-Left + Arriba-Izquierda + + + + Up-Right + Arriba-Derecha + + + + Down-Left + Abajo-Izquierda + + + + Down-Right + Abajo-Derecha + + + Saved To Device Guardado en dispositivo - + Saving Not Supported El dispositivo no admite guardado - + All Zones Todas las zonas - + Mode Specific Específico al modo - + Entire Segment Segmento completo @@ -881,7 +864,8 @@ - + + Rescan Devices Escanear dispositivos @@ -894,14 +878,10 @@ - + Delete Profile Suprimir perfil - - Load Profile - Cargar perfil - OpenRGB is detecting devices... @@ -923,167 +903,127 @@ Guardar perfil con nombre personalizado - + + Show/Hide Mostrar/esconder - + + Profiles Perfiles - + + Quick Colors Colores rápidos - + + Red Rojo - + + Yellow Amarillo - + + Green Verde - + + Cyan Cian - + + Blue Azul - + + Magenta Magenta - + + White Blanco - + + Lights Off Apagar luces - + + Exit Salir - + Plugins Plugins - + About OpenRGB Acerca de OpenRGB - + Manually Added Devices Dispositivos Añadidos Manualmente - Software - Software - - - + Supported Devices Dispositivos compatibles - + General Settings Configuración general - E1.31 Devices - Dispositivos E1.31 - - - Philips Hue Devices - Dispostivos Philips Hue - - - Philips Wiz Devices - Dispositivos Philips Wiz - - - OpenRGB QMK Protocol - Protocolo QMK OpenRGB - - - Serial Devices - Dispositivos de puerto serie - - - Yeelight Devices - Dispositivos Yeelight - - - + SMBus Tools Herramientas SMBus - + SDK Client Cliente del SDK - + SDK Server Servidor del SDK - + Do you really want to delete this profile? ¿Seguro que quiere suprimir este perfil? - + Log Console Consola de registro - - LIFX Devices - Dispositivos LIFX - - - Nanoleaf Devices - Dispositivos nanohojas - - - Elgato KeyLight Devices - Elgato dispositivos luz clave - - - Elgato LightStrip Devices - Elgato dispositivos tira luminosa - - - DMX Devices - Dispoditivos DMX - - - Kasa Smart Devices - Dispositivos inteligente Kasa - OpenRGBDynamicSettingsWidget @@ -1098,182 +1038,6 @@ Systema predeterminado - - OpenRGBE131SettingsEntry - - Start Channel: - Iniciar canal: - - - Number of LEDs: - Número de LEDs: - - - Start Universe: - Iniciar universo: - - - Name: - Nombre: - - - Matrix Order: - Orden de la matriz: - - - Matrix Height: - Altura de la matriz: - - - Matrix Width: - Ancho de la matriz: - - - Type: - Tipo: - - - IP (Unicast): - IP (Unicast): - - - Universe Size: - Tamaño del universo: - - - Keepalive Time: - Periodo de recordatorio: - - - RGB Order: - Orden RGB: - - - Single - Único - - - Linear - Lineal - - - Matrix - Matriz - - - Horizontal Top Left - Horizontal, arriba a la izquierda - - - Horizontal Top Right - Horizontal, arriba a la derecha - - - Horizontal Bottom Left - Horizontal, abajo a la izquierda - - - Horizontal Bottom Right - Horizontal, abajo a la derecha - - - Vertical Top Left - Vertical, arriba a la izquierda - - - Vertical Top Right - Vertical, arriba a la derecha - - - Vertical Bottom Left - Vertical, abajo a la izquierda - - - Vertical Bottom Right - Vertical, abajo a la derecha - - - - OpenRGBE131SettingsPage - - Add - Añadir - - - Remove - Suprimir - - - Save - Guardar - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Añadir - - - Remove - Suprimir - - - Save - Guardar - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Añadir - - - Remove - Suprimir - - - Save - Guardar - - - - OpenRGBGoveeSettingsEntry - - IP: - IP: - - - - OpenRGBGoveeSettingsPage - - Add - Añadir - - - Remove - Suprimir - - - Save - Guardar - - OpenRGBHardwareIDsDialog @@ -1302,58 +1066,6 @@ Vendedor - - OpenRGBKasaSmartSettingsEntry - - IP: - IP: - - - Name - Nombre - - - - OpenRGBKasaSmartSettingsPage - - Add - Añadir - - - Remove - Suprimir - - - Save - Guardar - - - - OpenRGBLIFXSettingsEntry - - IP: - IP: - - - Name - Nombre - - - - OpenRGBLIFXSettingsPage - - Add - Añadir - - - Remove - Suprimir - - - Save - Guardar - - OpenRGBLogConsolePage @@ -1390,156 +1102,6 @@ Anchura: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - Nuevo despositivo nanohoja - - - IP address: - Dirrecion de IP - - - Port: - Puerto - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP: - - - Port: - Puerto - - - Auth Key: - Llave de autenticacion - - - Unpair - desemparejar - - - Pair - Emparejar - - - - OpenRGBNanoleafSettingsPage - - Scan - Escanear - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - Para emparejar, oprima el boton de prender-apagar por 5-7 segundos hasta que el LED empiece a parpadear en patron - - - Add - Añadir - - - Remove - Suprimir - - - - OpenRGBPhilipsHueSettingsEntry - - IP: - IP: - - - Entertainment Mode: - Modo "entertainment": - - - Username: - Nombre de usuario: - - - Client Key: - Clave del cliente: - - - Unpair Bridge - Desemparejar puente - - - MAC: - MAC: - - - Auto Connect Group: - Conexión automática de grupo - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Suprimir - - - Add - Añadir - - - Save - Guardar - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - "Hue entry" is confusing, instead used "hue device" - Después de añadir un dispositivo Hue, reinicie OpenRGB y presione el botón de sincronización en su puente Hue para emparejarlo. - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP: - - - Use Cool White - Uso blanco frío - - - Use Warm White - Uso blanco cálido - - - White Strategy: - Estrategia Blanco - - - Average - Promedio - - - Minimum - Minimo - - - - OpenRGBPhilipsWizSettingsPage - - Add - Añadir - - - Remove - Suprimir - - - Save - Guardar - - OpenRGBPluginsEntry @@ -1582,10 +1144,6 @@ API Version: Versión API - - API Version Value - Valor de versión API - OpenRGBPluginsPage @@ -1596,7 +1154,7 @@ - + Remove Plugin Suprimir plugin @@ -1606,37 +1164,37 @@ <html><head/><body>Buscando por plugins? Ver la lista oficial en <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Instalar plugin de OpenRGB - + Plugin files (*.dll *.dylib *.so *.so.*) Archivos de plugin (*.dll *.dylib *.so *.so.*) - + Replace Plugin Sustituir plugin - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Ya existe un plugin con este nombre. ¿Está seguro de que quiere sustituir este plugin? - + Are you sure you want to remove this plugin? ¿Está seguro de que quiere suprimir este plugin? - + Restart Needed Reinicio requerido - + The plugin will be fully removed after restarting OpenRGB. Los complementos (plugins) seran suprimidos despues de renicio @@ -1703,14 +1261,6 @@ OpenRGBProfileListDialog - - Profile Name - Nombre del perfil - - - Save to an existing profile: - Guardar en salida - Profile Selection @@ -1727,36 +1277,6 @@ Crear un nuevo perfil - - OpenRGBQMKORGBSettingsEntry - - Name: - Nombre: - - - USB PID: - PID USB: - - - USB VID: - VID USB: - - - - OpenRGBQMKORGBSettingsPage - - Add - Añadir - - - Remove - Suprimir - - - Save - Guardar - - OpenRGBSegmentExportDialog @@ -1785,44 +1305,6 @@ Nombre del dispositivo (opcional): - - OpenRGBSerialSettingsEntry - - Baud: - Baudios: - - - Name: - Nombre: - - - Number of LEDs: - Número de LEDs: - - - Port: - Puerto serie: - - - Protocol: - Protocolo: - - - - OpenRGBSerialSettingsPage - - Add - Añadir - - - Remove - Suprimir - - - Save - Guardar - - OpenRGBServerInfoPage @@ -1942,14 +1424,6 @@ Website: Sitio web: - - <a href="https://openrgb.org">https://openrgb.org</a> - <a href="https://openrgb.org">https://openrgb.org</a> - - - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - SDK Version: @@ -2056,10 +1530,6 @@ Address: Dirección: - - Read Device - Leer dispositivo - SMBus Dumper: @@ -2112,10 +1582,6 @@ Dump Device Volcar memoria del dispositivo - - SMBus Reader: - Lector de SMBus: - Addr: @@ -2132,58 +1598,8 @@ Tamaño: - - OpenRGBYeelightSettingsEntry - - IP: - IP: - - - ? - ? - - - Music Mode: - Modo de música: - - - Override host IP: - Sobreescribir la IP del anfitrión: - - - Left blank for auto discovering host ip - Dejar en blanco para detección automática de la IP del anfitrión - - - Choose an IP... - Escoja una IP... - - - Choose the correct IP for the host - Escoja la IP correcta para el anfitrión - - - - OpenRGBYeelightSettingsPage - - Add - Añadir - - - Remove - Suprimir - - - Save - Guardar - - OpenRGBZoneEditorDialog - - Resize Zone - Redimensionar zona - Add Segment @@ -2293,18 +1709,6 @@ Ignore Ignorar - - Zones Resizer - Cambiar el tamaño de las zonas - - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>Una o mas zonas Redimensionable no han sido configuradas. Las zonas redimensionables se utilizan más comúnmente para encabezados RGB direccionables donde el tamaño del dispositivo conectado no se puede detectar automáticamente.</p><p>Por favor, introduzca el número de LEDs en cada zona a continuación.</p><p>Para obtener más información sobre cómo calcular el tamaño correcto, consulte este enlace.<a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - - - Resize the zones - Redimensione las zonas - Controller @@ -2448,25 +1852,6 @@ VID USB: - - ResourceManager - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the WinRing0 driver.</p><p>You must run OpenRGB as administrator at least once to allow WinRing0 to set up.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Algunos dispositivos internos pueda que no sean detectados:</h2><p>Uno o mas I2C o SMBus interfaz fallaron a iniciar.</p><p><b>RGB DRAM modulos, algunas placas' RGB luces integradas, y Tarjetas De Graficas RGB, no serán disponible OpenRGB</b> sin I2C o SMBus.</p><h4>Como reparar esto:</h4><p>En Windows, esto usualmente es causado por fallar en cargar controladores WinRing0 .</p><p>Debes de correr OpenRGB como administrador por lo menos una vez o al iniciar WinRing0 para construir .</p><p>Ver <a href='https://help.openrgb.org/'>help.openrgb.org</a> Para pasos adicionales para solucion de probemas si sigues viendo este mensaje.<br></p><h3>Si no estas usando RGB internal en tu computadora este mensaje no es importante para ti.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Algunos dispositivos internos pueda que no sean detectados:</h2><p>Uno o mas I2C o SMBus interfaz fallaron a iniciar.</p><p><b>RGB DRAM modulos, algunas placas' RGB luces integradas, y Tarjetas De Graficas RGB, no serán disponible OpenRGB</b> sin I2C o SMBus.</p><h4>Como reparar esto:</h4><p>en Linux, esto es usualmente porque i2c-dev modul no esta cargado.</p><p>Tu tienes que cargar i2c-dev modulo a largo con el i2c controlador(driver) para tu placa. Esto usualmentees i2c-piix4 para sytemas AMD y i2c-i801 para systemas Intel.</p><p>Ver <a href='https://help.openrgb.org/'>help.openrgb.org</a> Para pasos adicionales para solucion de probemas si sigues viendo este mensaje.<br></p><h3>Si no estas usando RGB internal en tu computadora este mensaje no es importante para ti.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>AVISO:</h2><p>The OpenRGB Las udev reglas no estan instaladas.</p><p>La mayoria de despositivos no estaran disponible a menos que OpenRGB se corra en root.</p><p>Si estan usando AppImage, Flatpak, o una version de OpenRGB compilada por uno mismo debes de installar las reglas udev manualmentey</p><p>Ver <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> para installar las reglas udev manualy</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>AVISO:</h2><p>Multiple OpenRGB Las reglas udev estan instaladas.</p><p>El archivo de reglas udev Reglas 60-openrgb.estan instalados en ambos /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiples reglas udev pueden causar conflictos, es recomendado remover uno de ellos.</p> - - SerialSettingsEntry @@ -2500,7 +1885,7 @@ Puerto: - + No serial ports found No se encontraron puertos seriales @@ -2508,353 +1893,285 @@ Settings - + Load Window Geometry Cargar forma de la ventana - 90000 - 90000 - - - + Run Zone Checks on Rescan Comprobar el tamaño de las zonas al escanear - Start Server - Iniciar servidor - - - + Start Minimized Iniciar minimizado - User Interface Settings: - Configuración de la interfaz de usuario: - - - + Start at Login Iniciar OpenRGB al iniciar sesión - + Minimize on Close Minimizar al salir - + Numerical Labels Etiquetas numéricas - + Display numerical labels for otherwise non-labeled LEDs in the LED view Mostrar etiquetas numéricas para los LEDs no etiquetados en la vista de LEDs - + Window Geometry Geometría de la ventana - + Save on Exit Guardar la forma de la ventana al cerrar - Start Client - Iniciar cliente - - - Load Profile - Cargar perfil - - - Set Server Port - Configurar puerto de red - - - + HID Safe Mode Modo seguro HID - + Use an alternate method for detecting HID devices Usar un método alternativo para detectar dispositivos HID - + Initial Detection Delay (ms) Retardo inicial de detección (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started Cantidad de tiempo, en milisegundos, de espera antes de detectar dispositivos al iniciar - + Detection Detección - + Enable Log Console Activar la consola de registros - + Log Level Nivel de registro - + Log File Count Limit Límite de número de archivos de registro - + Maximum number of log files to keep, 0 for no limit Número máximo de archivos de registro para conservar, 0 para no tener límite - + Log Manager Administrador de registros - + Serve All Controllers Servir todos los controladores - + Include controllers provided by client connections and plugins Incluir controladores proporcionados por conexiones de clientes y complementos - + Default Host Anfitrión por defecto - + Default Port Puerto por defecto - + Legacy Workaround Truco para versiones anteriores - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Trabajo alrededor de algunas implementaciones más antiguas de SDK que enviaron un tamaño incorrecto de paquete para ciertos paquetes - + Server Servidor - + Custom Arguments Argumentos personalizados - Log Manager Settings: - Configuración del gestor de registros: - - - Start at Login Status - Estado de iniciar OpenRGB al iniciar sesión - - - Start at Login Settings: - Configuración para iniciar OpenRGB al iniciar sesión: - - - Open Settings Folder - Abrir carpeta de configuración - - - Drivers Settings - Adjustes de controladores - - - + Monochrome Tray Icon Escala de grises icono de plato - + Save window geometry on exit Guardar la geometría de la ventana al salir - + X - + X - + Y Y - + Width Anchura - + Height Altura - + User Interface Interfaz de usuario - + SMBus Sleep Mode (restart required) Modo de suspensión SMBus (requiere reinicio) - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus reducir uso de CPU (requiere reiniciar) - Set Profile on Exit - Poner perfil en salida - - - + Shared SMBus Access (restart required) Compartir acceso SMBus (requiere reiniciar) - Set Server Host - Poner El Servido Host - - - + Language Idioma - + Disable Key Expansion inutillizar la llave de Expansion en vista de depositivo - + Hex Format Formato de Hax - + Enable Start at Login Habilitar inicio al iniciar sesión - + Start OpenRGB on login Iniciar OpenRGB al iniciar sesión - + Start minimized to the system tray Iniciar minimizado en la bandeja del sistema - + Additional command line arguments to pass to OpenRGB when starting on login Argumentos adicionales de línea de comandos para pasar a OpenRGB al iniciar en el inicio de sesión - + Language for the user interface Idioma para la interfaz de usuario - + Keep OpenRGB active in the system tray when closing the main window Mantener OpenRGB activo en la bandeja del sistema al cerrar la ventana principal - + Use a monochrome icon in the system tray instead of a full color icon Use un icono en tonos de gris en la bandeja del sistema en lugar de un icono en color completo - + Select #BBGGRR or #RRGGBB format for hex display and input Seleccionar formato #BBGGRR o #RRGGBB para la visualización e introducción en hexadecimal - + Compact Tabs Pestanas compactas - + Display sidebar tabs as icons only Mostrar solamente iconos en las pestañas de la barra lateral - + Tabs on Top Pestanas en la parte superior - + Display tabs on top instead of on the left Mostrar pestañas en la parte superior en lugar de a la izquierda - + Show LED View by Default Mostrar vista LED de forma predeterminada - + Drivers Conductores - Set Profile on Suspend - Establecer perfil en suspensión - - - Set Profile on Resume - Establecer perfil en resumen - - - + Enable Log File Establecer archivo de registro - - A problem occurred enabling Start at Login. - Ha ocurrido un problema al activar el inicio de OpenRGB al iniciar sesión. - English - US Español - - System Default - Systema predeterminado - Load Profile on Exit @@ -2887,16 +2204,36 @@ + Load Profile on Service Shutdown + Cargar perfil al apagar el servicio + + + + Profile to load when the OpenRGB background service shuts down + Perfil para cargar cuando el servicio en segundo plano de OpenRGB se cierre + + + + Load Profile on Service Startup + Cargar perfil al iniciar el servicio + + + + Profile to load when the OpenRGB background service starts up + Perfil para cargar cuando el servicio en segundo plano de OpenRGB inicia + + + Load Profile on Suspend Cargar perfil al suspender - + Profile to load before system enters sleep mode Perfil para cargar antes de que el sistema entre en modo de suspensión - + Profile Manager Administrador de perfiles diff --git a/qt/i18n/OpenRGB_fr_FR.ts b/qt/i18n/OpenRGB_fr_FR.ts index e4a3a0d33..028ec1205 100644 --- a/qt/i18n/OpenRGB_fr_FR.ts +++ b/qt/i18n/OpenRGB_fr_FR.ts @@ -92,7 +92,7 @@ Port: - + No serial ports found Aucun port série trouvé @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Certains appareils internes peuvent ne pas être détectés :</h2><p>Un ou plusieurs interfaces I2C ou SMBus n'ont pas réussi à initialiser.</p><p><b>Les modules de DRAM RGB, certaines lumières RGB intégrées sur les cartes mères et les cartes graphiques RGB ne seront pas disponibles dans OpenRGB</b> sans I2C ou SMBus.</p><h4>Comment corriger ce problème :</h4><p>Sous Windows, cela est généralement dû à une échec de chargement du pilote PawnIO.</p><p>Vous devez d'abord installer <a href='https://pawnio.eu/'>PawnIO</a>, puis vous devez exécuter OpenRGB en tant qu'administrateur afin d'accéder à ces appareils.</p><p>Voir <a href='https://help.openrgb.org/'>help.openrgb.org</a> pour des étapes supplémentaires de dépannage si vous continuez à voir ce message.<br></p><h3>Si vous n'utilisez pas de LED RGB internes sur un ordinateur de bureau, ce message n'est pas important pour vous.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Certains périphériques internes ne peuvent être détectés :</h2><p>Un ou plusieurs bus I2C ou SMBUS n'ont pas pu être initialisés.</p><p><b>Les modules de RAM, lumières internes sur la carte mère ou carte graphiques ne seront pas utilisables dans OpenRGB.</b></p><p>Sur Linux, c'est souvent un module noyau manquant comme i2c-dev.</p><p>Vous devez charger le module the i2c-dev ainsi que celui correspondant à votre carte mère. Pour les plateformes AMD c'est le module i2c-piix4, et i2c-i801 pour les plateformes Intel.</p><p>Voir <a href='https://help.openrgb.org/'>help.openrgb.org</a> pour de l'aide additionelle si vous continuez de voir ce message.<br></p><h3>Si vous n'utilisez pas de composants RGB internes, alors vous pouvez ignorer ce message.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Attention :</h2><p>Les règles udev ne sont pas installées.</p><p>La plupart des périphériques ne pourront pas êtres détectés, sauf si vous lancez en tant que super utilisateur.</p><p>Si vous utilisez AppImage, Flatpak, ou une version compilée par vos soins, vous devez installer les règles udev par vous-même.</p><p>Voir <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> pour une installation manuelle.</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>Attention :</h2><p>Plusieurs règles udev pour OpenRGB sont installées.</p><p>Le fichier 60-openrgb.rules est installé dans les chemins suivants /etc/udev/rules.d et /usr/lib/udev/rules.d.</p><p>Cela peut créer un conflit, il est recommandé de supprimer une de ces deux entrées.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Attention :</h2><p>Un ou plusieurs interfaces I2C/SMBus n'ont pas réussi à initialiser.</p><p>En fonction des interfaces qui n'ont pas réussi à initialiser, certains modules de DRAM RGB, certaines lumières RGB intégrées aux cartes mères et certaines cartes graphiques RGB peuvent ne pas être disponibles dans OpenRGB.</p><p>Sous Windows, cela est généralement dû à une échec de chargement du pilote PawnIO.</p><p>Pour que OpenRGB puisse accéder à ces appareils, vous devez installer PawnIO depuis <a href='https://pawnio.eu/'>https://pawnio.eu</a> et exécuter OpenRGB en tant qu'administrateur ou en tant que service du système.</p><p>Si vous n'utilisez aucun des appareils mentionnés ci-dessus, vous pouvez ignorer ce message en toute sécurité.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Attention :</h2><p>Un ou plusieurs interfaces I2C/SMBus n'ont pas pu être initialisées.</p><p>En fonction des interfaces qui n'ont pas pu être initialisées, certains modules de DRAM RGB, certaines lumières RGB intégrées aux cartes mères et certaines cartes graphiques RGB peuvent ne pas être disponibles dans OpenRGB.</p><p>Sous Linux, cela est généralement dû au fait que le module i2c-dev n'est pas chargé.</p><p>Pour que OpenRGB puisse accéder à ces appareils, vous devez charger le module i2c-dev ainsi que le module de pilote I2C approprié pour votre carte mère. Il s'agit généralement de i2c-piix4 pour les systèmes AMD et de i2c-i801 pour les systèmes Intel.</p><p>Si vous n'utilisez aucun des appareils mentionnés ci-dessus, vous pouvez ignorer ce message sans problème. - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Attention :</h2><p>Les règles udev d'OpenRGB ne sont pas installées.</p><p>La plupart des appareils ne seront pas disponibles à moins d'exécuter OpenRGB en tant que root.</p><p>Si vous utilisez une version AppImage, Flatpak ou compilée manuellement d'OpenRGB, vous devez installer les règles udev manuellement.</p><p>Voir <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> pour installer manuellement les règles udev.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Attention :</h2><p>Les règles udev d'OpenRGB ne sont pas installées.</p><p>La plupart des appareils ne seront pas disponibles à moins d'exécuter OpenRGB en tant que service du système ou en tant que root.</p><p>Si vous utilisez des versions AppImage, Flatpak ou compilées manuellement d'OpenRGB, vous devez installer les règles udev manuellement.</p><p>Voir <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> pour installer manuellement les règles udev.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Attention :</h2><p>Plusieurs règles udev OpenRGB sont installées.</p><p>Le fichier de règles udev 60-openrgb.rules est installé à la fois dans /etc/udev/rules.d et /usr/lib/udev/rules.d.</p><p>Plusieurs fichiers de règles udev peuvent entrer en conflit, il est recommandé d'en supprimer un.</p> @@ -363,7 +347,7 @@ QMK (protocole VialRGB) - + Serial Device Périphérique série @@ -499,60 +483,19 @@ Sauvegarder la connexion - + Rescan Devices Scanner les périphériques - + Disconnect Déconnecter - - - OpenRGBDMXSettingsEntry - Brightness Channel: - Canal de luminosité : - - - Blue Channel: - Canal des bleus : - - - Name: - Nom : - - - Green Channel: - Canal des verts : - - - Red Channel: - Canal des rouges : - - - Keepalive Time: - Temps de maintien : - - - Port: - Port : - - - - OpenRGBDMXSettingsPage - - Add - Ajouter - - - Remove - Supprimer - - - Save - Sauvegarder + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB est en mode client local. La connexion locale ne peut pas être déconnectée. @@ -564,44 +507,64 @@ + Device Configuration + Configuration du périphérique + + + + Device Name: + Nom du périphérique: + + + Device-Specific Configuration Configuration spécifique à l'appareil + + + Reset Device Configuration + Réinitialiser la configuration du périphérique + OpenRGBDeviceInfoPage - + Name: Nom : - + Vendor: Vendeur : - + Type: Type : - + + Display Name: + Nom d'affichage: + + + Description: Description : - + Version: Version : - + Location: Emplacement : - + Serial: Numéro de série : @@ -699,7 +662,7 @@ V : - + Edit Zone Éditer la zone @@ -720,7 +683,7 @@ - + Save To Device Sauvegarder dans le périphérique @@ -735,113 +698,133 @@ Éditer - + Set individual LEDs to static colors. Safe for use with software-driven effects. Défini individuellement la couleur de chaque LED. Fiable pour utiliser des effets logiciels. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Défini individuellement la couleur de chaque LED. Non fiable pour utiliser des effets logiciels. - + Sets the entire device or a zone to a single color. Défini la couleur pour un périphérique ou une zone entière. - + Gradually fades between fully off and fully on. Change graduellement entre allumé et éteint. - + Abruptly changes between fully off and fully on. Change directement entre allumé et éteint. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Change graduellement la couleur pour couvrir tout le spectre lumineux. Toutes les LEDs sont de la même couleur. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Change graduellement la couleur pour couvrir tout le spectre lumineux. Produit un motif d'arc en ciel en mouvement. - + Flashes lights when keys or buttons are pressed. Illumine les touches lors d'un appui clavier. - - + + Entire Device Périphérique entier - + Edit Device - + Éditer le périphérique - + Entire Zone Zone entière - + Entire Segment Segment entier - + Left Gauche - + Right Droite - + Up Haut - + Down Bas - + Horizontal Horizontal - + Vertical Vertical - - Saved To Device - Sauvegardé dans le périphérique + + Up-Left + - + + Up-Right + En haut à gauche + + + + Down-Left + En haut à droite + + + + Down-Right + En bas à gauche + + + + Saved To Device + En bas à droite + + + Saving Not Supported Sauvegarde matérielle non supportée - + All Zones Toutes les zones - + Mode Specific Spécifique au mode @@ -880,7 +863,8 @@ - + + Rescan Devices Scanner les périphériques @@ -893,14 +877,10 @@ - + Delete Profile Supprimer le profil - - Load Profile - Charger un profil - OpenRGB is detecting devices... @@ -922,160 +902,124 @@ Sauvegarder un profil avec un nom défini - + + Show/Hide Afficher/cacher - + + Profiles Profils - + + Quick Colors Couleurs rapides - + + Red Rouge - + + Yellow Jaune - + + Green Vert - + + Cyan Cyan - + + Blue Bleu - + + Magenta Magenta - + + White Blanc - + + Lights Off Tout éteindre - + + Exit Quitter - + Plugins Plugins - + About OpenRGB À propos d'OpenRGB - + Supported Devices Périphériques supportés - + General Settings Paramètres généraux - + Manually Added Devices Dispositifs ajoutés manuellement - DMX Devices - Matériel DMX - - - E1.31 Devices - Périphériques E1.31 - - - Kasa Smart Devices - Matériel Kasa Smart - - - LIFX Devices - Périphériques LIFX - - - Philips Hue Devices - Périphériques Philips Hue - - - Philips Wiz Devices - Périphériques Philips Wiz - - - OpenRGB QMK Protocol - Protocole OpenRGB QMK - - - Serial Devices - Périphériques série - - - Yeelight Devices - Périphériques Yeelight - - - Nanoleaf Devices - Périphériques Nanoleaf - - - Elgato KeyLight Devices - Périphériques Elgato KeyLight - - - Elgato LightStrip Devices - Périphériques Elgato LightStrip - - - + SMBus Tools Outils SMBus - + SDK Client SDK client - + SDK Server SDK serveur - + Do you really want to delete this profile? Êtes-vous sûr de vouloir supprimer ce profil? - + Log Console Journaux @@ -1093,182 +1037,6 @@ Par défaut - - OpenRGBE131SettingsEntry - - Start Channel: - Canal de départ : - - - Number of LEDs: - Nombre de LEDs : - - - Start Universe: - Univers de départ : - - - Name: - Nom : - - - Matrix Order: - Ordre de la matrice : - - - Matrix Height: - Hauteur de la matrice : - - - Matrix Width: - Largeur de la matrice : - - - Type: - Type : - - - IP (Unicast): - IP (Unicast) : - - - Universe Size: - Taille de l'univers : - - - Keepalive Time: - Temps de maintien : - - - RGB Order: - Ordre RGB : - - - Single - Unique - - - Linear - Linéaire - - - Matrix - Matrice - - - Horizontal Top Left - Horizontale haut gauche - - - Horizontal Top Right - Horizontale haut droite - - - Horizontal Bottom Left - Horizontale bas gauche - - - Horizontal Bottom Right - Horizontale bas droite - - - Vertical Top Left - Verticale haut gauche - - - Vertical Top Right - Verticale haut droite - - - Vertical Bottom Left - Verticale bas gauche - - - Vertical Bottom Right - Verticale bas droite - - - - OpenRGBE131SettingsPage - - Add - Ajouter - - - Remove - Supprimer - - - Save - Sauvegarder - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP : - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Ajouter - - - Remove - Supprimer - - - Save - Sauvegarder - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP : - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Ajouter - - - Remove - Supprimer - - - Save - Sauvegarder - - - - OpenRGBGoveeSettingsEntry - - IP: - IP : - - - - OpenRGBGoveeSettingsPage - - Add - Ajouter - - - Remove - Supprimer - - - Save - Sauvegarder - - OpenRGBHardwareIDsDialog @@ -1297,54 +1065,6 @@ Vendeur - - OpenRGBKasaSmartSettingsEntry - - IP: - IP : - - - Name - Nom - - - - OpenRGBKasaSmartSettingsPage - - Add - Ajouter - - - Remove - Supprimer - - - Save - Sauvegarder - - - - OpenRGBLIFXSettingsEntry - - Name - Nom - - - - OpenRGBLIFXSettingsPage - - Add - Ajouter - - - Remove - Supprimer - - - Save - Sauvegarder - - OpenRGBLogConsolePage @@ -1381,155 +1101,6 @@ Largeur: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - Nouvel appareil Nanoleaf - - - IP address: - Adresse IP : - - - Port: - Port : - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP : - - - Port: - Port : - - - Auth Key: - Clé-d'authentification : - - - Unpair - Dissocier - - - Pair - Appairer - - - - OpenRGBNanoleafSettingsPage - - Scan - Scanner - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - Pour appairer, maintenir le bouton on-off enfoncé pendant 5 à 7 secondes jusqu'à ce que la LED se mette à clignoter, puis cliquer sur le bouton "Appairer" dans les 30 secondes. - - - Add - Ajouter - - - Remove - Supprimer - - - - OpenRGBPhilipsHueSettingsEntry - - IP: - IP : - - - Entertainment Mode: - Mode divertissement : - - - Username: - Nom d'utilisateur : - - - Client Key: - Clé client : - - - Unpair Bridge - Dissocier le pont - - - MAC: - MAC : - - - Auto Connect Group: - Connexion automatique au groupe : - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Supprimer - - - Add - Ajouter - - - Save - Sauvegarder - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Après avoir ajouté une entrée Hue et enregistré, redémarrez OpenRGB et appuyez sur le bouton Sync sur votre pont Hue pour le coupler. - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP : - - - Use Cool White - Utiliser un blanc froid - - - Use Warm White - Utiliser un blanc chaud - - - White Strategy: - Stratégie des blancs : - - - Average - Moyenne - - - Minimum - Minimum - - - - OpenRGBPhilipsWizSettingsPage - - Add - Ajouter - - - Remove - Supprimer - - - Save - Sauvegarder - - OpenRGBPluginsEntry @@ -1572,10 +1143,6 @@ API Version: Version de l'API : - - API Version Value - Version de l'API - OpenRGBPluginsPage @@ -1586,7 +1153,7 @@ - + Remove Plugin Supprimer le plugin @@ -1596,37 +1163,37 @@ <html><head/><body>Vous cherchez un plugin ? La liste se trouve sur : <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Installer un plugin OpenRGB - + Plugin files (*.dll *.dylib *.so *.so.*) Fichiers de plugin (*.dll *.dylib *.so *.so.*) - + Replace Plugin Remplacer le plugin - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Un plugin avec ce nom de fichier est déjà installé. Êtes-vous sûr de vouloir le remplacer? - + Are you sure you want to remove this plugin? Êtes-vous sûr de vouloir supprimer ce plugin? - + Restart Needed Redémarrage requis - + The plugin will be fully removed after restarting OpenRGB. Ce plugin sera entièrement supprimé aprèsa avoir redémarré OpenRGB. @@ -1693,14 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - Nom du profil - - - Save to an existing profile: - Sauvegarder dans un profil existant : - Profile Selection @@ -1717,36 +1276,6 @@ Créer un nouveau profil : - - OpenRGBQMKORGBSettingsEntry - - Name: - Nom : - - - USB PID: - USB PID : - - - USB VID: - USB VID : - - - - OpenRGBQMKORGBSettingsPage - - Add - Ajouter - - - Remove - Supprimer - - - Save - Sauvegarder - - OpenRGBSegmentExportDialog @@ -1775,44 +1304,6 @@ Nom du périphérique (facultatif): - - OpenRGBSerialSettingsEntry - - Baud: - Baud : - - - Name: - Nom : - - - Number of LEDs: - Nombre de LEDs : - - - Port: - Port : - - - Protocol: - Protocole : - - - - OpenRGBSerialSettingsPage - - Add - Ajouter - - - Remove - Supprimer - - - Save - Sauvegarder - - OpenRGBServerInfoPage @@ -2020,10 +1511,6 @@ Apply Changes Appliquer les changements - - Get hardware IDs - Obtenir les identifiants du matériel - Get Hardware IDs @@ -2042,10 +1529,6 @@ Address: Adresse : - - Read Device - Lire le périphérique - SMBus Dumper: @@ -2098,10 +1581,6 @@ Dump Device Dump du matériel - - SMBus Reader: - Lecteur SMBus: - Addr: @@ -2118,58 +1597,8 @@ Taille : - - OpenRGBYeelightSettingsEntry - - IP: - IP : - - - ? - ? - - - Music Mode: - Mode musique : - - - Override host IP: - Ecraser l'IP de l'hôte : - - - Left blank for auto discovering host ip - Laisser vide pour une détection automatique - - - Choose an IP... - Choisir une IP… - - - Choose the correct IP for the host - Choisir l'IP correspondante à l'hôte - - - - OpenRGBYeelightSettingsPage - - Add - Ajouter - - - Remove - Supprimer - - - Save - Sauvegarder - - OpenRGBZoneEditorDialog - - Resize Zone - Changer la taille de la zone - Add Segment @@ -2279,18 +1708,6 @@ Ignore Ignorer - - Zones Resizer - Redimensionnement des zones - - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>Une ou plusieurs zones redimensionnables n'ont pas été configurées.</p><p>Entrer le nombre de LEDs connectées pour chacune de ces zones.</p><p>Pour plus d'informations, accéder à <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">cette page.</span></a></p></body></html> - - - Resize the zones - Redimensionner les zones - Controller @@ -2434,25 +1851,6 @@ USB VID: - - ResourceManager - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the WinRing0 driver.</p><p>You must run OpenRGB as administrator at least once to allow WinRing0 to set up.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Certains périphériques internes ne peuvent être détectés :</h2><p>Un ou plusieurs bus I2C ou SMBUS n'ont pas pu être initialisés.</p><p><b>Les modules de RAM, lumières internes sur la carte mère ou carte graphiques ne seront pas utilisables dans OpenRGB.</b></p><p>Sur Windows, c'est souvent un problème de chargement du driver WinRing0.</p><p>Vous devez lancer OpenRGB au moins une fois en tant qu'administrateur.</p><p>Voir <a href='https://help.openrgb.org/'>help.openrgb.org</a> pour de l'aide additionnelle si vous continuez de voir ce message.<br></p><h3>Si vous n'utilisez pas de composants RGB internes, alors vous pouvez ignorer ce message.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Certains périphériques internes ne peuvent être détectés :</h2><p>Un ou plusieurs bus I2C ou SMBUS n'ont pas pu être initialisés.</p><p><b>Les modules de RAM, lumières internes sur la carte mère ou carte graphiques ne seront pas utilisables dans OpenRGB.</b></p><p>Sur Linux, c'est souvent un module noyau manquant comme i2c-dev.</p><p>Vous devez charger le module the i2c-dev ainsi que celui correspondant à votre carte mère. Pour les plateformes AMD c'est le module i2c-piix4, et i2c-i801 pour les plateformes Intel.</p><p>Voir <a href='https://help.openrgb.org/'>help.openrgb.org</a> pour de l'aide additionelle si vous continuez de voir ce message.<br></p><h3>Si vous n'utilisez pas de composants RGB internes, alors vous pouvez ignorer ce message.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Attention :</h2><p>Les règles udev ne sont pas installées.</p><p>La plupart des périphériques ne pourront pas êtres détectés, sauf si vous lancez en tant que super utilisateur.</p><p>Si vous utilisez AppImage, Flatpak, ou une version compilée par vos soins, vous devez installer les règles udev par vous-même.</p><p>Voir <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> pour une installation manuelle.</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>Attention :</h2><p>Plusieurs règles udev pour OpenRGB sont installées.</p><p>Le fichier 60-openrgb.rules est installé dans les chemins suivants /etc/udev/rules.d et /usr/lib/udev/rules.d.</p><p>Cela peut créer un conflit, il est recommandé de supprimer une de ces deux entrées.</p> - - SerialSettingsEntry @@ -2486,7 +1884,7 @@ Port: - + No serial ports found Aucun port série trouvé @@ -2494,337 +1892,277 @@ Settings - + Load Window Geometry Charger la géométrie de la fenêtre - 90000 - 90000 - - - + Run Zone Checks on Rescan Vérifier les zones après un scan - Start Server - Démarrer le serveur - - - + Start Minimized Démarrer minimisé - User Interface Settings: - Paramètres d'interface : - - - + Start at Login Démarrer à la connexion - + Minimize on Close Minimiser lors de la fermeture - + Numerical Labels Étiquettes numériques - + Display numerical labels for otherwise non-labeled LEDs in the LED view Afficher des étiquettes numériques pour les LED non étiquetées dans la vue LED - + Window Geometry Géométrie de la fenêtre - + Save on Exit Sauvegarder la géométrie de la fenêtre lors de la fermeture - Start Client - Démarrer le client - - - Load Profile - Charger un profil - - - Set Server Port - Définir le port du serveur - - - + HID Safe Mode Mode de sécurité HID - + Use an alternate method for detecting HID devices Utiliser une méthode alternative pour détecter les appareils HID - + Initial Detection Delay (ms) Délai initial de détection (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started Durée d'attente, en millisecondes, avant de détecter les appareils lors du démarrage - + Detection Détection - + Enable Log Console Activer la console de logs - + Log Level Niveau de journalisation - + Log File Count Limit Limite du nombre de fichiers journaux - + Maximum number of log files to keep, 0 for no limit Nombre maximum de fichiers de journal à conserver, 0 pour aucun limite - + Log Manager Gestionnaire de journaux - + Serve All Controllers Servir tous les contrôleurs - + Include controllers provided by client connections and plugins Inclure les contrôleurs fournis par les connexions clientes et les plugins - + Default Host Hôte par défaut - + Default Port Port par défaut - + Legacy Workaround Contournement hérité - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Contournement pour certaines implémentations plus anciennes de SDK qui envoyaient une taille de paquet incorrecte pour certains paquets - + Server Serveur - + Custom Arguments Arguments personnalisés - Log Manager Settings: - Paramètres des logs : - - - Start at Login Status - Statut du démarrage à la connexion - - - Start at Login Settings: - Paramètres de démarrage à la connexion : - - - Open Settings Folder - Ouvrir le dossier de configuration - - - Drivers Settings - Paramètre de pilotes - - - + Monochrome Tray Icon Icône de la barre des tâches grise - + Save window geometry on exit Enregistrer la géométrie de la fenêtre à la sortie - + X X - + Y Y - + Width Largeur - + Height Hauteur - + User Interface Interface utilisateur - + SMBus Sleep Mode (restart required) Mode veille SMBus (redémarrage requis) - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus : réduire l'utilisation CPU (redémarrage requis) - Set Profile on Exit - Appliquer le profil à la fermeture - - - + Shared SMBus Access (restart required) Accès SMBus partagé (redémarrage requis) - Set Server Host - Définir l'hôte du serveur - - - + Language Langue - + Disable Key Expansion Désactiver le remplissage des touches du clavier dans la vue périphériques - + Hex Format Format hexadécimal - + Enable Start at Login Activer le démarrage à l'ouverture de la session - + Start OpenRGB on login Démarrer OpenRGB à l'ouverture de la session - + Start minimized to the system tray Démarrer minimisé dans la zone de notification du système - + Additional command line arguments to pass to OpenRGB when starting on login Arguments supplémentaires de ligne de commande à transmettre à OpenRGB lors du démarrage à l'ouverture de session - + Language for the user interface Langue de l'interface utilisateur - + Keep OpenRGB active in the system tray when closing the main window Garder OpenRGB actif dans la zone de notification du système lors de la fermeture de la fenêtre principale - + Use a monochrome icon in the system tray instead of a full color icon Utiliser une icône monochrome dans la zone de notification au lieu d'une icône en couleur complète - + Select #BBGGRR or #RRGGBB format for hex display and input Sélectionnez le format #BBGGRR ou #RRGGBB pour l'affichage et la saisie hexadécimaux - + Compact Tabs Onglets compacts - + Display sidebar tabs as icons only Afficher les onglets de la barre latérale uniquement sous forme d'icônes - + Tabs on Top Onglets en haut - + Display tabs on top instead of on the left Afficher les onglets en haut au lieu de sur la gauche - + Show LED View by Default Afficher les LEDs par défaut - + Drivers Pilotes - Set Profile on Suspend - Définir le profil lors du passage en veille - - - Set Profile on Resume - Définir le profil en sortie de veille - - - + Enable Log File Activer la console des journaux @@ -2833,14 +2171,6 @@ English - US Français - - System Default - Par défaut - - - A problem occurred enabling Start at Login. - Un problème est survenu pour l'activation du démarrage à la connexion. - Load Profile on Exit @@ -2873,16 +2203,36 @@ + Load Profile on Service Shutdown + Charger le profil à l'arrêt du service + + + + Profile to load when the OpenRGB background service shuts down + Profil à charger lors de la fermeture du service d'arrière-plan OpenRGB + + + + Load Profile on Service Startup + Charger le profil au démarrage du service + + + + Profile to load when the OpenRGB background service starts up + Profil à charger lors du démarrage du service en arrière-plan OpenRGB + + + Load Profile on Suspend Charger le profil en mise en veille - + Profile to load before system enters sleep mode Profil à charger avant que le système entre en mode veille - + Profile Manager Gestionnaire de profils @@ -2895,396 +2245,6 @@ Nom du périphérique - - Ui::OpenRGBClientInfoPage - - Disconnect - Déconnecter - - - - Ui::OpenRGBDevicePage - - Set individual LEDs to static colors. Safe for use with software-driven effects. - Défini individuellement la couleur de chaque LED. Fiable pour utiliser des effets logiciels. - - - Set individual LEDs to static colors. Not safe for use with software-driven effects. - Défini individuellement la couleur de chaque LED. Non fiable pour utiliser des effets logiciels. - - - Sets the entire device or a zone to a single color. - Défini la couleur pour un périphérique ou une zone entière. - - - Gradually fades between fully off and fully on. - Change graduellement entre allumé et éteint. - - - Abruptly changes between fully off and fully on. - Change directement entre allumé et éteint. - - - Gradually cycles through the entire color spectrum. All lights on the device are the same color. - Change graduellement la couleur pour couvrir tout le spectre lumineux. Toutes les LEDs sont de la même couleur. - - - Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. - Change graduellement la couleur pour couvrir tout le spectre lumineux. Produit un motif d'arc en ciel en mouvement. - - - Flashes lights when keys or buttons are pressed. - Illumine les touches lors d'un appui clavier. - - - Entire Device - Périphérique entier - - - Entire Zone - Zone entière - - - Left - Gauche - - - Right - Droite - - - Up - Haut - - - Down - Bas - - - Horizontal - Horizontal - - - Vertical - Vertical - - - Saved To Device - Sauvegardé dans le périphérique - - - Save To Device - Sauvegarder dans le périphérique - - - Saving Not Supported - Sauvegarde matérielle non supportée - - - All Zones - Toutes les zones - - - Mode Specific - Spécifique au mode - - - Entire Segment - Segment entier - - - - Ui::OpenRGBDialog - - Show/Hide - Afficher/cacher - - - Profiles - Profils - - - Quick Colors - Couleurs rapides - - - Red - Rouge - - - Yellow - Jaune - - - Green - Vert - - - Cyan - Cyan - - - Blue - Bleu - - - Magenta - Magenta - - - White - Blanc - - - Lights Off - Tout éteindre - - - Exit - Quitter - - - Plugins - Plugins - - - Software - Logiciel - - - Supported Devices - Périphériques supportés - - - General Settings - Paramètres généraux - - - E1.31 Devices - Périphériques E1.31 - - - Philips Hue Devices - Périphériques Philips Hue - - - Philips Wiz Devices - Périphériques Philips Wiz - - - OpenRGB QMK Protocol - Protocole OpenRGB QMK - - - Serial Devices - Périphériques série - - - Yeelight Devices - Périphériques Yeelight - - - SMBus Tools - Outils SMBus - - - SDK Client - SDK client - - - SDK Server - SDK serveur - - - Delete Profile - Supprimer le profil - - - Do you really want to delete this profile? - Êtes-vous sûr de vouloir supprimer ce profil ? - - - Log Console - Journaux - - - LIFX Devices - Périphériques LIFX - - - Nanoleaf Devices - Périphériques Nanoleaf - - - Elgato KeyLight Devices - Périphériques Elgato KeyLight - - - Elgato LightStrip Devices - Périphériques Elgato LightStrip - - - DMX Devices - Matériel DMX - - - Kasa Smart Devices - Matériel Kasa Smart - - - - Ui::OpenRGBE131SettingsEntry - - Single - Unique - - - Linear - Linéaire - - - Matrix - Matrice - - - Horizontal Top Left - Horizontale haut gauche - - - Horizontal Top Right - Horizontale haut droite - - - Horizontal Bottom Left - Horizontale bas gauche - - - Horizontal Bottom Right - Horizontale bas droite - - - Vertical Top Left - Verticale haut gauche - - - Vertical Top Right - Verticale haut droite - - - Vertical Bottom Left - Verticale bas gauche - - - Vertical Bottom Right - Verticale bas droite - - - - Ui::OpenRGBPhilipsWizSettingsEntry - - Average - Moyenne - - - Minimum - Minimum - - - - Ui::OpenRGBPluginsPage - - Install OpenRGB Plugin - Installer un plugin OpenRGB - - - Plugin files (*.dll *.dylib *.so *.so.*) - Fichiers de plugin (*.dll *.dylib *.so *.so.*) - - - Replace Plugin - Remplacer le plugin - - - A plugin with this filename is already installed. Are you sure you want to replace this plugin? - Un plugin avec ce nom de fichier est déjà installé. Êtes-vous sûr de vouloir le remplacer ? - - - Remove Plugin - Supprimer le plugin - - - Are you sure you want to remove this plugin? - Êtes-vous sûr de vouloir supprimer ce plugin ? - - - Restart Needed - Redémarrage requis - - - The plugin will be fully removed after restarting OpenRGB. - Ce plugin sera entièrement supprimé aprèsa avoir redémarré OpenRGB. - - - - Ui::OpenRGBServerInfoPage - - Stopping... - Arrêt en cours… - - - Online - En ligne - - - Offline - Hors ligne - - - - Ui::OpenRGBYeelightSettingsEntry - - Choose an IP... - Choisir une IP… - - - Choose the correct IP for the host - Choisir l'IP correspondante à l'hôte - - - - Ui::OpenRGBZoneInitializationDialog - - Resize the zones - Redimensionner les zones - - - Controller - Contrôleur - - - Zone - Zone - - - Size - Taille - - - - Ui::Settings - - A problem occurred enabling Start at Login. - Un problème est survenu pour l'activation du démarrage à la connexion. - - - English - US - Français - - - System Default - Par défaut - - YeelightSettingsEntry diff --git a/qt/i18n/OpenRGB_hr_HR.ts b/qt/i18n/OpenRGB_hr_HR.ts index e971ba903..1fdf4e917 100644 --- a/qt/i18n/OpenRGB_hr_HR.ts +++ b/qt/i18n/OpenRGB_hr_HR.ts @@ -92,7 +92,7 @@ Ulaz: - + No serial ports found Nije pronađen niti jedan serijski priključak @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Neke unutarnje uređaje možda neće biti moguće prepoznati:</h2><p>Jedan ili više sufe I2C ili SMBus sufe neuspješno pokrenuti.</p><p><b>Moduli RGB DRAM, RGB osvjetljenje na nekim matičnim pločama i RGB grafičke kartice neće biti dostupni u OpenRGB</b> bez I2C ili SMBus.</p><h4>Kako ovo popraviti:</h4><p>Na Windowsu, to je obično uzrokovano neuspješnim učitavanjem PawnIO vođnica.</p><p>Prvo morate instalirati <a href='https://pawnio.eu/'>PawnIO</a>, zatim morate pokrenuti OpenRGB kao administrator kako biste pristupili ovim uređajima.</p><p>Pogledajte <a href='https://help.openrgb.org/'>help.openrgb.org</a> za dodatne korake za rješavanje problema ako nastavljate da vidite ovu poruku.<br></p><h3>Ako ne koristite unutarnji RGB na stolnom računalu, ova poruka vam nije važna.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Neke unutarnje uređaje možda neće biti moguće prepoznati:</h2><p>Jedan ili više su I2C ili SMBus sučelja neuspješno pokrenuta.</p><p><b>Moduli RGB DRAM-a, RGB osvjetljenje na nekim matičnim pločama i RGB grafičke kartice neće biti dostupni u OpenRGB-u</b> bez I2C-a ili SMBusa.</p><h4>Kako ovo popraviti:</h4><p>Na Linuxu, to je obično zato što modul i2c-dev nije učitan.</p><p>Morate učitati modul i2c-dev zajedno s ispravnim I2C vozačem za vašu matičnu ploču. To je obično i2c-piix4 za sustave s AMD procesorima i i2c-i801 za sustave s Intel procesorima.</p><p>Pogledajte <a href='https://help.openrgb.org/'>help.openrgb.org</a> za dodatne korake za uklanjanje poteškoća ako i dalje vidite ovu poruku.<br></p><h3>Ako ne koristite unutarnji RGB na stoljaču, ova poruka vam nije važna.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>UPozorenje:</h2><p>Pravila OpenRGB udev nisu instalirana.</p><p>Većina uređaja neće biti dostupna osim ako se OpenRGB pokreće kao root.</p><p>Ako koristite AppImage, Flatpak ili samostalno kompilirane verzije OpenRGB, morate ručno instalirati pravila udev.</p><p>Pogledajte <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> za ručnu instalaciju pravila udev.</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>UPozorenje:</h2><p>Instalirane su više OpenRGB udev pravila.</p><p>Udev pravila datoteke 60-openrgb.rules instalirane su u oba /etc/udev/rules.d i /usr/lib/udev/rules.d.</p><p>Više udev pravila datoteka mogu se međusobno sudarati, preporučuje se uklanjanje jedne od njih.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Upozorenje:</h2><p>Jedan ili više I2C/SMBus sučelja nije uspjelo pokrenuti.</p><p>Ovisno o tome koja sučelja nisu uspjela pokrenuti, neki RGB DRAM moduli, neka osvetljavanja RGB na matičnim pločama i RGB grafičke kartice možda neće biti dostupni u OpenRGB.</p><p>Na Windowsu, to je obično uzrokovano neuspješnim učitavanjem PawnIO vođnica.</p><p>Da bi OpenRGB mogao pristupiti tim uređajima, morate instalirati PawnIO s <a href='https://pawnio.eu/'>https://pawnio.eu</a> i pokrenuti OpenRGB kao administratora ili kao sustavnu uslugu.</p><p>Ako ne koristite nijedan od navedenih uređaja, možete sigurno zanemariti ovu poruku.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Upozorenje:</h2><p>Jedan ili više I2C/SMBus sučelja nije uspjelo pokrenuti.</p><p>Ovisno o tome koja sučelja nisu uspjela pokrenuti, neki RGB DRAM moduli, neka osvetljavanja RGB na matičnim pločama i RGB grafičke kartice možda neće biti dostupni u OpenRGB.</p><p>Na Linuxu, to je obično zato što modul i2c-dev nije učitan.</p><p>Da biste OpenRGB mogao pristupiti tim uređajima, morate učitati modul i2c-dev zajedno s ispravnim modulom za upravljač I2C za vaju matičnu ploču. To je obično i2c-piix4 za sustave s AMD procesorima i i2c-i801 za sustave s Intel procesorima.</p><p>Ako ne koristite nijedan od uređaja navedenih iznad, možete sigurno zanemariti ovu poruku. - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Upozorenje:</h2><p>Pravila OpenRGB udev nisu instalirana.</p><p>Većina uređaja neće biti dostupna osim ako se OpenRGB pokreće kao root.</p><p>Ako koristite AppImage, Flatpak ili samostalno kompilirane verzije OpenRGB, morate ručno instalirati pravila udev.</p><p>Pogledajte <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> za ručnu instalaciju pravila udev.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Upozorenje:</h2><p>Pravila OpenRGB udev nisu instalirana.</p><p>Većina uređaja neće biti dostupna osim ako se OpenRGB pokreće kao sistem usluga ili kao root.</p><p>Ako koristite AppImage, Flatpak ili samostalno kompilirane verzije OpenRGB, morate ručno instalirati pravila udev.</p><p>Pogledajte <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> za ručnu instalaciju pravila udev.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Upozorenje:</h2><p>Instalirane su više OpenRGB udev pravila.</p><p>Udev pravila datoteke 60-openrgb.rules instalirana su u oba /etc/udev/rules.d i /usr/lib/udev/rules.d.</p><p>Više udev pravila datoteka mogu se međusobno sudarati, preporučuje se uklanjanje jedne od njih.</p> @@ -364,7 +348,7 @@ QMK (VialRGB protokol) - + Serial Device Uređaj za serijalnu komunikaciju @@ -500,44 +484,19 @@ Spremi povezivanje - + Rescan Devices Pretraži uređaje - + Disconnect Prekini povezivanje - - - OpenRGBDMXSettingsEntry - Name: - Naziv: - - - Keepalive Time: - Vrijeme držanja aktivnim: - - - Port: - Ulaz: - - - - OpenRGBDMXSettingsPage - - Add - Dodaj - - - Remove - Ukloni - - - Save - Spremi + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB je u lokalnom načinu rada. Lokalna veza možda ne može biti prekinuta. @@ -549,44 +508,64 @@ + Device Configuration + Konfiguracija uređaja + + + + Device Name: + Naziv uređaja: + + + Device-Specific Configuration Konfiguracija specifična za uređaj + + + Reset Device Configuration + Poništi konfiguraciju uređaja + OpenRGBDeviceInfoPage - + Name: Naziv: - + Vendor: Proizvođač: - + Type: Vrsta: - + + Display Name: + Naziv za prikaz: + + + Description: Opis: - + Version: Inačica: - + Location: Lokacija: - + Serial: Serijski: @@ -661,12 +640,12 @@ Edit - + Zone: - Zona: + Uredi @@ -689,7 +668,7 @@ V: - + Edit Zone Uredi zonu @@ -710,7 +689,7 @@ - + Save To Device Spremi u uređaj @@ -720,113 +699,133 @@ Hex: - + Set individual LEDs to static colors. Safe for use with software-driven effects. Postavite pojedinačne LED diode na nepromjenjive boje. Siguran za korištenje sa softverski upravljanim efektima. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Postavite pojedinačne LED diode na nepromjenjive boje. Nije sigurno za korištenje sa softverski upravljanim efektima. - + Sets the entire device or a zone to a single color. Postavlja cijeli uređaj ili zonu na jednu boju. - + Gradually fades between fully off and fully on. Postupno blijedi između potpuno isključenog i potpuno uključenog. - + Abruptly changes between fully off and fully on. Naglo se mijenja između potpuno isključenog i potpuno uključenog. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Postupno kruži cijelim spektrom boja. Sva svjetla na uređaju su iste boje. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Postupno kruži cijelim spektrom boja. Stvara dugin uzorak koji se kreće. - + Flashes lights when keys or buttons are pressed. Svjetla trepere kad se pritisnu tipke ili gumbi. - - + + Entire Device Cijeli uređaj - + Edit Device - + Uredi uređaj - + Entire Zone Cijela zona - + Left Lijevo - + Right Desno - + Up Gore - + Down Dolje - + Horizontal Vodoravno - + Vertical Okomito - + + Up-Left + Gore-lijevo + + + + Up-Right + Desno gore + + + + Down-Left + Dolje-Desno + + + + Down-Right + Dolje-Udesno + + + Saved To Device Spremljeno u uređaj - + Saving Not Supported Spremanje nije podržano - + All Zones Sve zone - + Mode Specific Specifičan način - + Entire Segment Cijeli segment @@ -865,7 +864,8 @@ - + + Rescan Devices Pretraži uređaje @@ -878,14 +878,10 @@ - + Delete Profile Obriši profil - - Load Profile - Učitaj profil - OpenRGB is detecting devices... @@ -907,159 +903,127 @@ Spremi profil s prilagođenim nazivom - + + Show/Hide Prikaži/Sakrij - + + Profiles Profili - + + Quick Colors Brze boje - + + Red Crvena - + + Yellow Žuta - + + Green Zelena - + + Cyan Cijan - + + Blue Plava - + + Magenta Magenta - + + White Bijela - + + Lights Off Isključi svjetla - + + Exit Zatvori - + Plugins Priključci - + About OpenRGB O OpenRGB-u - + General Settings Opće postavke - + Manually Added Devices Uključeni uređaji - E1.31 Devices - E1.31 uređaji - - - Philips Hue Devices - Philips Hue uređaji - - - Philips Wiz Devices - Philips Wiz uređaji - - - OpenRGB QMK Protocol - OpenRGB QMK protokol - - - Serial Devices - Serijski uređaji - - - Yeelight Devices - Yeelight uređaji - - - + SMBus Tools SMBus alati - + SDK Client SDK klijent - + SDK Server SDK poslužitelj - + Do you really want to delete this profile? Sigurno želite obrisati ovaj profil? - + Log Console Konzola zapisa - LIFX Devices - LIFX uređaji - - - Nanoleaf Devices - Nanoleaf uređaji - - - Elgato KeyLight Devices - Elgato KeyLight uređaji - - - Elgato LightStrip Devices - Elgato LightStrip uređaji - - - + Supported Devices Podržani uređaji - - Software - Softver - OpenRGBDynamicSettingsWidget @@ -1074,182 +1038,6 @@ Zadano sustavom - - OpenRGBE131SettingsEntry - - Start Channel: - Početni kanal: - - - Number of LEDs: - Broj LED-ica: - - - Start Universe: - Pokreni svemir: - - - Name: - Naziv: - - - Matrix Order: - Poredak matrice: - - - Matrix Height: - Visina matrice: - - - Matrix Width: - Širina matrice: - - - Type: - Vrsta: - - - IP (Unicast): - IP (Unicast): - - - Universe Size: - Veličina svemira: - - - Keepalive Time: - Vrijeme držanja aktivnim: - - - RGB Order: - RGB poredak: - - - Single - Pojedinačno - - - Linear - Linearno - - - Matrix - Matrica - - - Horizontal Top Left - Vodorovnao gore lijevo - - - Horizontal Top Right - Vodorovnao gore desno - - - Horizontal Bottom Left - Vodorovnao dolje lijevo - - - Horizontal Bottom Right - Vodorovnao dolje desno - - - Vertical Top Left - Okomito gore lijevo - - - Vertical Top Right - Okomito gore desno - - - Vertical Bottom Left - Okomito dolje lijevo - - - Vertical Bottom Right - Okomito dolje desno - - - - OpenRGBE131SettingsPage - - Add - Dodaj - - - Remove - Ukloni - - - Save - Spremi - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Dodaj - - - Remove - Ukloni - - - Save - Spremi - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Dodaj - - - Remove - Ukloni - - - Save - Spremi - - - - OpenRGBGoveeSettingsEntry - - IP: - IP: - - - - OpenRGBGoveeSettingsPage - - Add - Dodaj - - - Remove - Ukloni - - - Save - Spremi - - OpenRGBHardwareIDsDialog @@ -1278,58 +1066,6 @@ Proizvođač - - OpenRGBKasaSmartSettingsEntry - - IP: - IP: - - - Name - Naziv - - - - OpenRGBKasaSmartSettingsPage - - Add - Dodaj - - - Remove - Ukloni - - - Save - Spremi - - - - OpenRGBLIFXSettingsEntry - - IP: - IP: - - - Name - Naziv - - - - OpenRGBLIFXSettingsPage - - Add - Dodaj - - - Remove - Ukloni - - - Save - Spremi - - OpenRGBLogConsolePage @@ -1366,123 +1102,6 @@ Širina: - - OpenRGBNanoleafNewDeviceDialog - - Port: - Ulaz: - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP: - - - Port: - Ulaz: - - - Unpair - Odpari - - - Pair - Upari - - - - OpenRGBNanoleafSettingsPage - - Scan - Pretraži - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - Za uparivanje držite on-off tipku pritisnutu 5-7 sekundi dok LED ne počinje bljeskati po uzorcima, zatim kliknite "Upari" tipku unutar 30 sekundi. - - - Add - Dodaj - - - Remove - Ukloni - - - - OpenRGBPhilipsHueSettingsEntry - - IP: - IP: - - - Entertainment Mode: - Način zabave: - - - Username: - Korisničko ime: - - - Client Key: - Ključ klijenta: - - - Unpair Bridge - Odpari most - - - MAC: - MAC: - - - Auto Connect Group: - Automatski poveži grupu: - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Ukloni - - - Add - Dodaj - - - Save - Spremi - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Nakon dodavanja Hue stavke i spremanja, ponovno pokrenite OpenRGB i pritisnite Sync tipku na vašem Hue mostu za uparivanje. - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP: - - - - OpenRGBPhilipsWizSettingsPage - - Add - Dodaj - - - Remove - Ukloni - - - Save - Spremi - - OpenRGBPluginsEntry @@ -1525,10 +1144,6 @@ API Version: Verzija API: - - API Version Value - Verzija API - OpenRGBPluginsPage @@ -1539,7 +1154,7 @@ - + Remove Plugin Ukloni priključak @@ -1549,37 +1164,37 @@ <html><head/><body>Tražite priključke? Pogledajte službeni popis na <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Instaliraj OpenRGB priključak - + Plugin files (*.dll *.dylib *.so *.so.*) Datoteke priključka (*.dll *.dylib *.so *.so.*) - + Replace Plugin Zamijeni priključak - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Priključak s ovim nazivom datoteke već je instaliran. Sigurno želite zamijeniti ovaj priključak? - + Are you sure you want to remove this plugin? Sigurno želite ukloniti ovaj priključak? - + Restart Needed Potrebno je ponovno pokrenuti - + The plugin will be fully removed after restarting OpenRGB. Plugin će se potpuno ukloniti nakon ponovnog pokretanja OpenRGB-a. @@ -1646,10 +1261,6 @@ OpenRGBProfileListDialog - - Profile Name - Naziv profila - Profile Selection @@ -1666,36 +1277,6 @@ Stvori novi profil: - - OpenRGBQMKORGBSettingsEntry - - Name: - Naziv: - - - USB PID: - USB PID: - - - USB VID: - USB VID: - - - - OpenRGBQMKORGBSettingsPage - - Add - Dodaj - - - Remove - Ukloni - - - Save - Spremi - - OpenRGBSegmentExportDialog @@ -1724,44 +1305,6 @@ Ime uređaja (nepovlačno): - - OpenRGBSerialSettingsEntry - - Baud: - Baud: - - - Name: - Naziv: - - - Number of LEDs: - Broj LED-ica: - - - Port: - Ulaz: - - - Protocol: - Protokol: - - - - OpenRGBSerialSettingsPage - - Add - Dodaj - - - Remove - Ukloni - - - Save - Spremi - - OpenRGBServerInfoPage @@ -1881,14 +1424,6 @@ Website: Web stranica: - - <a href="https://openrgb.org">https://openrgb.org</a> - <a href="https://openrgb.org">https://openrgb.org</a> - - - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - SDK Version: @@ -1995,10 +1530,6 @@ Address: Adresa: - - Read Device - Čitaj uređaj - SMBus Dumper: @@ -2051,10 +1582,6 @@ Dump Device Ispiši uređaj - - SMBus Reader: - SMBus čitač: - Addr: @@ -2071,58 +1598,8 @@ Velićina: - - OpenRGBYeelightSettingsEntry - - IP: - IP: - - - ? - ? - - - Music Mode: - Glazbeni način: - - - Override host IP: - Zaobiđi IP poslužitelja: - - - Left blank for auto discovering host ip - Lijevo prazno za automatsko otkrivanje ip poslužitelja - - - Choose an IP... - Odaberite IP adresu... - - - Choose the correct IP for the host - Odaberite ispravnu IP adresu poslužitelja - - - - OpenRGBYeelightSettingsPage - - Add - Dodaj - - - Remove - Ukloni - - - Save - Spremi - - OpenRGBZoneEditorDialog - - Resize Zone - Zona prilagodljivih veličina - Add Segment @@ -2232,10 +1709,6 @@ Ignore Zanemari - - Resize the zones - Prilagodi veličinu zona - Controller @@ -2412,7 +1885,7 @@ Ulaz: - + No serial ports found Nije pronađen niti jedan serijski priključak @@ -2420,345 +1893,285 @@ Settings - + Load Window Geometry Učitaj geometriju prozora - 90000 - 90000 - - - + Run Zone Checks on Rescan Pokrenute zone se provjeravaju pri pretraživanju - Start Server - Pokreni poslužitelja - - - + Start Minimized Pokreni smanjeno - User Interface Settings: - Postavke korisničkog sučelja: - - - + Start at Login Pokreni pri prijavi - + Minimize on Close Smanji u ikonu sustava pri zatvaranju - + Numerical Labels Numeričke oznake - + Display numerical labels for otherwise non-labeled LEDs in the LED view Prikaži numeričke oznake za LED-e koji inače nisu označeni u pogledu LED-a - + Window Geometry Geometrija prozora - + Save on Exit Spremi geometriju pri zatvaranju - Start Client - Pokreni klijent - - - Load Profile - Učitaj profil - - - Set Server Port - Postavi ulaz poslužitelja - - - + HID Safe Mode Sigurnosni način HID - + Use an alternate method for detecting HID devices Koristi alternativan način za otkrivanje uređaja HID - + Initial Detection Delay (ms) Početni zamka otklanjanja (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started Količina vremena u milisekundama za čekanje prije otkrivanja uređaja kada se pokrene - + Detection Detekcija - + Enable Log Console Omogući konzolu zapisa - + Log Level Razina dnevnika - + Log File Count Limit Ograničenje broja datoteka dnevnika - + Maximum number of log files to keep, 0 for no limit Maksimalan broj datoteka dnevnika koje treba zadržati, 0 za beskonačan broj - + Log Manager Upravljač dnevnika - + Serve All Controllers Upravljači za sve - + Include controllers provided by client connections and plugins Uključi kontrolere nudićine klijentskih veza i dodataka - + Default Host Zadani domaćin - + Default Port Zadani priključak - + Legacy Workaround Pregledni rješenje - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Otključavanje za neke starije implementacije SDK-a koje su slale pogrešnu veličinu paketa za određene pakete - + Server Server - + Custom Arguments Prilagođeni argumenti - Log Manager Settings: - Postavke upravitelja zapisa: - - - Start at Login Status - Pokreni pri stanju prijave - - - Start at Login Settings: - Postavke pokretanja pri prijavi: - - - Open Settings Folder - Otvori mapu postavki - - - Drivers Settings - Postavke upravljačkih programa - - - + Monochrome Tray Icon Siva ikona sustava - + Save window geometry on exit Spasi geometriju prozora pri izlasku - + X X - + Y Y - + Width Širina - + Height Visina - + User Interface Korisnički sučelje - + SMBus Sleep Mode (restart required) Način spavanja SMBus (potreban je ponovni pokretanje) - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: Smanjuje CPU upotrebu (potrebno je ponovno pokretanje) - Set Profile on Exit - Postavi profil pri izlazu - - - + Shared SMBus Access (restart required) Dijeljeni SMBus:pristup (potrebno je ponovno pokretanje) - Set Server Host - Postavi adresu poslužitelja - - - + Language Jezik - + Disable Key Expansion Onemogući proširivanje ključeva - + Hex Format Hexadecimalni format - + Enable Start at Login Omogući pokretanje pri prijavi - + Start OpenRGB on login Pokreni OpenRGB pri prijavi - + Start minimized to the system tray Pokreni minimiziran u sistemsku truju - + Additional command line arguments to pass to OpenRGB when starting on login Dodatni argumenti naredbenog retka za slanje OpenRGB-u kada se pokreće pri prijavi - + Language for the user interface Jezik za korisnički sučelju - + Keep OpenRGB active in the system tray when closing the main window Zadrži OpenRGB aktivnim u sistemskom trayeru kada zatvoriš glavno prozor - + Use a monochrome icon in the system tray instead of a full color icon Koristi monokromatski ikonu u sistemskom trayeru umjesto puno bojene ikone - + Select #BBGGRR or #RRGGBB format for hex display and input Odaberite format #BBGGRR ili #RRGGBB za prikaz i unos u heksadekadskom obliku - + Compact Tabs Kompaktni kartice - + Display sidebar tabs as icons only Prikaži kartice bočne trake samo kao ikone - + Tabs on Top Kartice na vrhu - + Display tabs on top instead of on the left Prikaži kartice na vrhu umjesto na lijevoj strani - + Show LED View by Default Prikaži prikaz LED dioda kao zadano - + Drivers Vozači - + Enable Log File Omogući datoteku dnevnika - - A problem occurred enabling Start at Login. - Problem se dogodio pri omogućavanju 'Pokreni pri prijavi' mogućnosti. - English - US Hrvatski - - System Default - Zadano sustavom - Load Profile on Exit @@ -2791,16 +2204,36 @@ + Load Profile on Service Shutdown + Učitaj profil pri zaustavljanju usluge + + + + Profile to load when the OpenRGB background service shuts down + Profila koji se učitava kada pozadinska usluga OpenRGB zaustavi rad + + + + Load Profile on Service Startup + Učitaj profil pri pokretanju usluge + + + + Profile to load when the OpenRGB background service starts up + Profila koji se učitava kada se pozadinski usluga OpenRGB pokrene + + + Load Profile on Suspend Učitaj profil na prijelazu u suspend - + Profile to load before system enters sleep mode Profila za učitavanje prije nego što sustav pređe u način čekanja - + Profile Manager Mngager profila diff --git a/qt/i18n/OpenRGB_it_IT.ts b/qt/i18n/OpenRGB_it_IT.ts index aab149aaf..4e35b26c0 100644 --- a/qt/i18n/OpenRGB_it_IT.ts +++ b/qt/i18n/OpenRGB_it_IT.ts @@ -92,7 +92,7 @@ Porta: - + No serial ports found Non sono stati trovati porte seriali @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Alcuni dispositivi interni potrebbero non essere rilevati:</h2><p>Uno o più interfacce I2C o SMBus non sono riuscite ad inizializzarsi.</p><p><b>I moduli RGB DRAM, l'illuminazione RGB integrata su alcuni schede madre e le schede grafiche RGB non saranno disponibili in OpenRGB</b> senza I2C o SMBus.</p><h4>Come risolvere questo problema:</h4><p>Su Windows, questo è generalmente causato da un fallimento nel caricamento del driver PawnIO.</p><p>Devi prima installare <a href='https://pawnio.eu/'>PawnIO</a>, quindi devi avviare OpenRGB come amministratore per accedere a questi dispositivi.</p><p>Vedere <a href='https://help.openrgb.org/'>help.openrgb.org</a> per ulteriori passaggi di risoluzione dei problemi se continui a vedere questo messaggio.<br></p><h3>Se non stai utilizzando l'illuminazione RGB interna su un desktop, questo messaggio non è importante per te.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Alcuni dispositivi interni potrebbero non venire riconosciuti:</h2><p>Una o più interfacce I2C o SMBus non sono riuscite ad essere lanciate.</p><p><b>I moduli di DRAM RGB, l'illuminazione RGB integrata di alcune schede madri, e le Schede Grafiche RGB, non saranno disponibili in OpenRGB</b> senza I2C o SMBus.</p><h4>Come risolvere questo problema:</h4><p>Su Linux, questo avviene solitamente perché il modulo i2c-dev non è stato caricato.</p><p>Devi caricare il modulo i2c-dev insieme al driver i2c corretto per la tua scheda madre. Questo è solitamente i2c-piix4 per i sistemi AMD e i2c-i801 per i sistemi Intel.</p><p>Vedi <a href='https://help.openrgb.org/'>help.openrgb.org</a> per ulteriori passaggi di risoluzione problemi se continui a vedere questo messaggio.<br></p><h3>Se non stai usando gli RGB interni su un fisso questo messaggio non è importante per te.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>ATTENZIONE:</h2><p>Le regole udev di OpenRGB non sono installate.</p><p>La maggior parte dei dispositivi non sarà disponibile a meno che OpenRGB non venga eseguito da root.</p><p>Se stai usando l'AppImage, il Flatpak, o versioni autocompilate di OpenRGB devi installare le regole udev manualmente</p><p>Vedi <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> per installare le regole udev manualmente</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ATTENZIONE:</h2><p>Più regole udev di OpenRGB sono installate.</p><p>Il file delle regole udev 60-openrgb.rules è installato sia in /etc/udev/rules.d sia in /usr/lib/udev/rules.d.</p><p>Molteplici file di regole udev possono andare in conflitto, è consigliato rimuoverne una.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Avviso:</h2><p>Uno o più interfacce I2C/SMBus non sono riuscite ad inizializzarsi.</p><p>Dipendentemente da quali interfacce non sono riuscite ad inizializzarsi, alcuni moduli DRAM RGB, l'illuminazione RGB integrata su alcune schede madri e le schede video RGB potrebbero non essere disponibili in OpenRGB.</p><p>Su Windows, questo è generalmente causato da un fallimento nel caricare il driver PawnIO.</p><p>Per permettere a OpenRGB di accedere a questi dispositivi, è necessario installare PawnIO da <a href='https://pawnio.eu/'>https://pawnio.eu</a> e avviare OpenRGB come amministratore o come servizio di sistema.</p><p>Se non si utilizzano nessuno dei dispositivi elencati sopra, è possibile ignorare questo messaggio in sicurezza.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Avviso:</h2><p>Uno o più interfacce I2C/SMBus non sono riuscite ad inizializzarsi.</p><p>Dipendentemente da quali interfacce non sono riuscite ad inizializzarsi, alcuni moduli RGB DRAM, alcune luci RGB integrate sulla scheda madre e schede video RGB potrebbero non essere disponibili in OpenRGB.</p><p>Su Linux, ciò accade di solito perché il modulo i2c-dev non è caricato.</p><p>Per permettere a OpenRGB di accedere a questi dispositivi, devi caricare il modulo i2c-dev insieme al modulo corretto del driver I2C per la tua scheda madre. Questo è di solito i2c-piix4 per i sistemi AMD e i2c-i801 per i sistemi Intel.</p><p>Se non stai utilizzando nessuno dei dispositivi elencati sopra, puoi ignorare sicuramente questo messaggio. - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Avviso:</h2><p>Le regole udev di OpenRGB non sono installate.</p><p>La maggior parte dei dispositivi non sarà disponibile a meno che non si esegua OpenRGB come root.</p><p>Se si utilizza AppImage, Flatpak o versioni compilate manualmente di OpenRGB, è necessario installare manualmente le regole udev.</p><p>Vedere <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> per installare manualmente le regole udev.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Avviso:</h2><p>Le regole udev di OpenRGB non sono installate.</p><p>La maggior parte dei dispositivi non sarà disponibile a meno che non si esegua OpenRGB come servizio del sistema o come root.</p><p>Se si utilizza un'immagine AppImage, Flatpak o versioni compilate manualmente di OpenRGB, è necessario installare manualmente le regole udev.</p><p>Vedere <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> per installare manualmente le regole udev.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Avviso:</h2><p>Sono installate più regole udev per OpenRGB.</p><p>Il file delle regole udev 60-openrgb.rules è installato sia in /etc/udev/rules.d che in /usr/lib/udev/rules.d.</p><p>Le diverse regole udev possono entrare in conflitto, si consiglia di rimuovere uno di essi.</p> @@ -363,7 +347,7 @@ QMK (Protocollo VialRGB) - + Serial Device Dispositivo seriale @@ -499,60 +483,19 @@ Salva Connessione - + Rescan Devices Scansiona Nuovamente Dispositivi - + Disconnect Disconnetti - - - OpenRGBDMXSettingsEntry - Brightness Channel: - Canale Luminosità: - - - Blue Channel: - Canale Blu: - - - Name: - Nome: - - - Green Channel: - Canale Verde: - - - Red Channel: - Canale Rosso: - - - Keepalive Time: - Tempo Keepalive: - - - Port: - Porta: - - - - OpenRGBDMXSettingsPage - - Add - Aggiungi - - - Remove - Rimuovi - - - Save - Salva + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB è in modalità client locale. La connessione locale potrebbe non essere disconnessa. @@ -564,44 +507,64 @@ + Device Configuration + Configurazione del dispositivo + + + + Device Name: + Nome del dispositivo: + + + Device-Specific Configuration Configurazione specifica del dispositivo + + + Reset Device Configuration + Reimposta la configurazione del dispositivo + OpenRGBDeviceInfoPage - + Name: Nome: - + Vendor: Produttore: - + Type: Tipo: - + + Display Name: + + + + Description: Descrizione: - + Version: Versione: - + Location: Posizione: - + Serial: Seriale: @@ -699,7 +662,7 @@ V: - + Edit Zone Modifica zona @@ -720,7 +683,7 @@ - + Save To Device Salva Sul Dispositivo @@ -735,113 +698,133 @@ Modifica - + Set individual LEDs to static colors. Safe for use with software-driven effects. Imposta LED individuali su colori statici. Sicuro per l'utilizzo con effetti guidati dal software. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Imposta LED individuali su colori statici. Non sicuro per l'utilizzo con effetti guidati dal software. - + Sets the entire device or a zone to a single color. Imposta l'intero dispositivo o una zona su un solo colore. - + Gradually fades between fully off and fully on. Sfuma gradualmente fra completamente spento e completamente acceso. - + Abruptly changes between fully off and fully on. Cambia bruscamente fra completamente spento e completamente acceso. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Ripete gradualmente l'intero spettro dei colori. Tutte le luci sul dispositivo sono dello stesso colore. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Ripete gradualmente l'intero spettro dei colori. Produce una fantasia arcobaleno che si muove. - + Flashes lights when keys or buttons are pressed. Fa lampeggiare le luci quando tasti o pulsanti vengono premuti. - - + + Entire Device Intero Dispositivo - + Edit Device - + Modifica Dispositivo - + Entire Zone Intera Zona - + Left Sinistra - + Right Destra - + Up Su - + Down Giù - + Horizontal Orizzontale - + Vertical Verticale - + + Up-Left + In alto a sinistra + + + + Up-Right + In alto a destra + + + + Down-Left + In basso a sinistra + + + + Down-Right + In basso a destra + + + Saved To Device Salvato Sul Dispositivo - + Saving Not Supported Salvataggio Non Supportato - + All Zones Tutte le Zone - + Mode Specific Specifico della Modalità - + Entire Segment Intero Segmento @@ -880,7 +863,8 @@ - + + Rescan Devices Scansiona Nuovamente Dispositivi @@ -893,14 +877,10 @@ - + Delete Profile Elimina Profilo - - Load Profile - Carica Profilo - OpenRGB is detecting devices... @@ -922,171 +902,127 @@ Salva Profilo con nome personalizzato - + + Show/Hide Mostra/Nascondi - + + Profiles Profili - + + Quick Colors Colori Rapidi - + + Red Rosso - + + Yellow Giallo - + + Green Verde - + + Cyan Ciano - + + Blue Blu - + + Magenta Magenta - + + White Bianco - + + Lights Off Luci Spente - + + Exit Esci - + Plugins Plugin - + General Settings Impostazioni Generali - + Manually Added Devices Dispositivi aggiunti manualmente - E1.31 Devices - Dispositivi E1.31 - - - Philips Hue Devices - Dispositivi Philips Hue - - - Philips Wiz Devices - Dispositivi Philips Wiz - - - OpenRGB QMK Protocol - Protocollo QMK OpenRGB - - - Serial Devices - Dispositivi Seriali - - - Yeelight Devices - Dispositivi Yeelight - - - + SMBus Tools Strumenti SMBus - + SDK Client SDK del Client - + SDK Server SDK del Server - + Do you really want to delete this profile? Vuoi davvero eliminare questo profilo? - + Log Console Console Registro - LIFX Devices - Dispositivi LIFX - - - Nanoleaf Devices - Dispositivi Nanoleaf - - - Elgato KeyLight Devices - Dispositivi Elgato KeyLight - - - Elgato LightStrip Devices - Dispositivi Elgato LightStrip - - - + Supported Devices Dispositivi Supportati - Software - Software - - - DMX Devices - Dispositivi DMX - - - Kasa Smart Devices - Dispositivi Smart Kasa - - - + About OpenRGB Riguardo OpenRGB - - Govee Devices - Dispositivi Govee - OpenRGBDynamicSettingsWidget @@ -1101,182 +1037,6 @@ Predefinita di Sistema - - OpenRGBE131SettingsEntry - - Start Channel: - Avvia Canale: - - - Number of LEDs: - Numero di LED: - - - Start Universe: - Avvia Universo: - - - Name: - Nome: - - - Matrix Order: - Ordine Matrice: - - - Matrix Height: - Altezza Matrice: - - - Matrix Width: - Larghezza Matrice: - - - Type: - Tipo: - - - IP (Unicast): - IP (Unicast): - - - Universe Size: - Dimensione Universo: - - - Keepalive Time: - Tempo Keepalive: - - - RGB Order: - Ordine RGB: - - - Single - Singolo - - - Linear - Lineare - - - Matrix - Matrice - - - Horizontal Top Left - Orizzontale in Alto a Sinistra - - - Horizontal Top Right - Orizzontale in Alto a Destra - - - Horizontal Bottom Left - Orizzontale in Basso a Sinistra - - - Horizontal Bottom Right - Orizzontale in Basso a Destra - - - Vertical Top Left - Verticale in Alto a Sinistra - - - Vertical Top Right - Verticale in Alto a Destra - - - Vertical Bottom Left - Verticale in Basso a Sinistra - - - Vertical Bottom Right - Verticale in Basso a Destra - - - - OpenRGBE131SettingsPage - - Add - Aggiungi - - - Remove - Rimuovi - - - Save - Salva - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Aggiungi - - - Remove - Rimuovi - - - Save - Salva - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Aggiungi - - - Remove - Rimuovi - - - Save - Salva - - - - OpenRGBGoveeSettingsEntry - - IP: - IP: - - - - OpenRGBGoveeSettingsPage - - Add - Aggiungi - - - Remove - Rimuovi - - - Save - Salva - - OpenRGBHardwareIDsDialog @@ -1305,58 +1065,6 @@ Produttore - - OpenRGBKasaSmartSettingsEntry - - IP: - IP: - - - Name - Nome - - - - OpenRGBKasaSmartSettingsPage - - Add - Aggiungi - - - Remove - Rimuovi - - - Save - Salva - - - - OpenRGBLIFXSettingsEntry - - IP: - IP: - - - Name - Nome - - - - OpenRGBLIFXSettingsPage - - Add - Aggiungi - - - Remove - Rimuovi - - - Save - Salva - - OpenRGBLogConsolePage @@ -1393,155 +1101,6 @@ Larghezza: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - Nuovo dispositivo Nanoleaf - - - IP address: - Indirizzo IP: - - - Port: - Porta: - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP: - - - Port: - Porta: - - - Auth Key: - Chiave Autorizzazione: - - - Unpair - Dissocia - - - Pair - Associa - - - - OpenRGBNanoleafSettingsPage - - Scan - Scansiona - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - Per associare, mantieni premuto il pulsante on-off per 5-7 secondi finché il LED non inizia a lampeggiare in maniera costante, poi clicca il pulsante "Associa" entro 30 secondi. - - - Add - Aggiungi - - - Remove - Rimuovi - - - - OpenRGBPhilipsHueSettingsEntry - - IP: - IP: - - - Entertainment Mode: - Modalità Intrattenimento: - - - Username: - Nome Utente: - - - Client Key: - Chiave Client: - - - Unpair Bridge - Dissocia Bridge - - - MAC: - MAC: - - - Auto Connect Group: - Connetti Gruppo Automaticamente: - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Rimuovi - - - Add - Aggiungi - - - Save - Salva - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Dopo aver aggiunto una voce di Hue e aver salvato, riavvia OpenRGB e premi il pulsante Sincronizza sul tuo bridge Hue per associarlo. - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP: - - - Use Cool White - Usa Bianco Freddo - - - Use Warm White - Usa Bianco Caldo - - - White Strategy: - Strategia Bianco: - - - Average - Media - - - Minimum - Minimo - - - - OpenRGBPhilipsWizSettingsPage - - Add - Aggiungi - - - Remove - Rimuovi - - - Save - Salva - - OpenRGBPluginsEntry @@ -1584,10 +1143,6 @@ API Version: Versione API: - - API Version Value - Versione Valore API - OpenRGBPluginsPage @@ -1598,7 +1153,7 @@ - + Remove Plugin Rimuovi Plugin @@ -1608,37 +1163,37 @@ <html><head/><body>Cerchi i plugin? Visualizza la lista ufficiale su <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Installa Plugin OpenRGB - + Plugin files (*.dll *.dylib *.so *.so.*) File plugin (*.dll *.dylib *.so *.so.*) - + Replace Plugin Sostituisci Plugin - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Un plugin con questo nome file è già installato. Sei sicuro di voler sostituire questo plugin? - + Are you sure you want to remove this plugin? Sei sicuro di voler rimuovere questo plugin? - + Restart Needed Riavvio Necessario - + The plugin will be fully removed after restarting OpenRGB. Il plugin verrà rimosso completamente dopo aver riavviato OpenRGB. @@ -1705,14 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - Nome Profilo - - - Save to an existing profile: - Salva in un profilo esistente: - Profile Selection @@ -1729,36 +1276,6 @@ Crea un profilo nuovo: - - OpenRGBQMKORGBSettingsEntry - - Name: - Nome: - - - USB PID: - PID USB: - - - USB VID: - VID USB: - - - - OpenRGBQMKORGBSettingsPage - - Add - Aggiungi - - - Remove - Rimuovi - - - Save - Salva - - OpenRGBSegmentExportDialog @@ -1787,44 +1304,6 @@ Nome del dispositivo (opzionale): - - OpenRGBSerialSettingsEntry - - Baud: - Baud: - - - Name: - Nome: - - - Number of LEDs: - Numero di LED: - - - Port: - Porta: - - - Protocol: - Protocollo: - - - - OpenRGBSerialSettingsPage - - Add - Aggiungi - - - Remove - Rimuovi - - - Save - Salva - - OpenRGBServerInfoPage @@ -1944,14 +1423,6 @@ Website: Sito web: - - <a href="https://openrgb.org">https://openrgb.org</a> - <a href="https://openrgb.org">https://openrgb.org</a> - - - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - SDK Version: @@ -1962,10 +1433,6 @@ Plugin API Version: Versione API Plugin: - - Qt Version Value - Valore Versione Qt - Qt Version: @@ -1976,10 +1443,6 @@ OS Version: Versione SO: - - OS Version Value - Valore Versione SO - GNU General Public License, version 2 @@ -2066,10 +1529,6 @@ Address: Indirizzo: - - Read Device - Leggi Dispositivo - SMBus Dumper: @@ -2122,10 +1581,6 @@ Dump Device Esegui Dump Dispositivo - - SMBus Reader: - Lettore SMBus: - Addr: @@ -2142,58 +1597,8 @@ Dimensione: - - OpenRGBYeelightSettingsEntry - - IP: - IP: - - - ? - ? - - - Music Mode: - Modalità Musica: - - - Override host IP: - Ignora IP host: - - - Left blank for auto discovering host ip - Lasciato vuoto per l'auto scoperta dell'ip dell'host - - - Choose an IP... - Scegli un IP... - - - Choose the correct IP for the host - Scegli l'IP corretto per l'host - - - - OpenRGBYeelightSettingsPage - - Add - Aggiungi - - - Remove - Rimuovi - - - Save - Salva - - OpenRGBZoneEditorDialog - - Resize Zone - Ridimensiona Zona - Add Segment @@ -2303,18 +1708,6 @@ Ignore Ignora - - Zones Resizer - Ridimensionatore Zone - - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>Una o più zone ridimensionabili non sono state configurate. Le zone ridimensionabili sono comunemente usate per header RGB indirizzabili nei quali la dimensione del dispositivo connesso non può essere riconosciuta automaticamente.</p><p>Per favore, inserisci il numero di LED in ciascuna zona qui sotto.</p><p>Per ulteriori informazioni riguardo il calcolo della dimensione corretta, recati su <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - - - Resize the zones - Ridimensiona le zone - Controller @@ -2458,25 +1851,6 @@ VID USB: - - ResourceManager - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the WinRing0 driver.</p><p>You must run OpenRGB as administrator at least once to allow WinRing0 to set up.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Alcuni dispositivi interni potrebbero non venire riconosciuti:</h2><p>Una o più interfacce I2C o SMBus non sono riuscite ad essere lanciate.</p><p><b>I moduli di DRAM RGB, l'illuminazione RGB integrata di alcune schede madri, e le Schede Grafiche RGB, non saranno disponibili in OpenRGB</b> senza I2C o SMBus.</p><h4>Come risolvere questo problema:</h4><p>Su Windows, questo è solitamente causato da un caricamento non riuscito del driver WinRing0.</p><p>Devi eseguire OpenRGB da amministratore almeno una volta per consentire a WinRing0 di essere impostato.</p><p>Vedi <a href='https://help.openrgb.org/'>help.openrgb.org</a> per ulteriori passaggi di risoluzione problemi se continui a vedere questo messaggio.<br></p><h3>Se non stai usando gli RGB interni su un fisso questo messaggio non è importante per te.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Alcuni dispositivi interni potrebbero non venire riconosciuti:</h2><p>Una o più interfacce I2C o SMBus non sono riuscite ad essere lanciate.</p><p><b>I moduli di DRAM RGB, l'illuminazione RGB integrata di alcune schede madri, e le Schede Grafiche RGB, non saranno disponibili in OpenRGB</b> senza I2C o SMBus.</p><h4>Come risolvere questo problema:</h4><p>Su Linux, questo avviene solitamente perché il modulo i2c-dev non è stato caricato.</p><p>Devi caricare il modulo i2c-dev insieme al driver i2c corretto per la tua scheda madre. Questo è solitamente i2c-piix4 per i sistemi AMD e i2c-i801 per i sistemi Intel.</p><p>Vedi <a href='https://help.openrgb.org/'>help.openrgb.org</a> per ulteriori passaggi di risoluzione problemi se continui a vedere questo messaggio.<br></p><h3>Se non stai usando gli RGB interni su un fisso questo messaggio non è importante per te.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>ATTENZIONE:</h2><p>Le regole udev di OpenRGB non sono installate.</p><p>La maggior parte dei dispositivi non sarà disponibile a meno che OpenRGB non venga eseguito da root.</p><p>Se stai usando l'AppImage, il Flatpak, o versioni autocompilate di OpenRGB devi installare le regole udev manualmente</p><p>Vedi <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> per installare le regole udev manualmente</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ATTENZIONE:</h2><p>Più regole udev di OpenRGB sono installate.</p><p>Il file delle regole udev 60-openrgb.rules è installato sia in /etc/udev/rules.d sia in /usr/lib/udev/rules.d.</p><p>Molteplici file di regole udev possono andare in conflitto, è consigliato rimuoverne una.</p> - - SerialSettingsEntry @@ -2510,7 +1884,7 @@ Porta: - + No serial ports found Non sono stati trovati porte seriali @@ -2518,353 +1892,285 @@ Settings - + Load Window Geometry Carica Geometria Finestra - 90000 - 90000 - - - + Run Zone Checks on Rescan Esegui controlli sulle zone alla riscansione - Start Server - Avvia Server - - - + Start Minimized Avvia Ridotto a Icona - User Interface Settings: - Impostazioni Interfaccia Utente: - - - + Start at Login Avvia All'Accesso - + Minimize on Close Riduci a Icona alla Chiusura - + Numerical Labels Etichette numeriche - + Display numerical labels for otherwise non-labeled LEDs in the LED view Visualizza etichette numeriche per LED non etichettati in visualizzazione LED - + Window Geometry Geometria della finestra - + Save on Exit Salva Geometria Alla Chiusura - Start Client - Avvia Client - - - Load Profile - Carica Profilo - - - Set Server Port - Imposta Porta Server - - - + HID Safe Mode Modalità sicura HID - + Use an alternate method for detecting HID devices Utilizzare un metodo alternativo per rilevare i dispositivi HID - + Initial Detection Delay (ms) Ritardo iniziale di rilevamento (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started Quantità di tempo, in millisecondi, da attendere prima di rilevare i dispositivi al momento del avvio - + Detection Rilevamento - + Enable Log Console Attiva Console Registri - + Log Level Livello di registro - + Log File Count Limit Limite del numero di file di log - + Maximum number of log files to keep, 0 for no limit Numero massimo di file di log da conservare, 0 per nessun limite - + Log Manager Gestione Log - + Serve All Controllers Servi tutti i controllori - + Include controllers provided by client connections and plugins Includi i controllori forniti dalle connessioni client e dai plugin - + Default Host Host predefinito - + Default Port Porta predefinita - + Legacy Workaround Lavorazione legacy - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Workaround per alcune implementazioni più vecchie dell'SDK che inviavano una dimensione del pacchetto non corretta per alcuni pacchetti - + Server Server - + Custom Arguments Parametri Personalizzati - Log Manager Settings: - Impostazioni Gestore Registri: - - - Start at Login Status - Stato Avvio all'Accesso - - - Start at Login Settings: - Impostazioni Avvio All'Accesso: - - - Open Settings Folder - Apri Cartella Impostazioni - - - Drivers Settings - Impostazioni Driver - - - + Monochrome Tray Icon Icona in Scala di Grigi nell'Area di Notifica - + Save window geometry on exit Salva la geometria della finestra all'uscita - + X X - + Y Y - + Width Larghezza - + Height Altezza - + User Interface Interfaccia utente - + SMBus Sleep Mode (restart required) Modalità Sleep SMBus (richiesto il riavvio) - + AMD SMBus: Reduce CPU Usage (restart required) SMBus AMD: Riduci Utilizzo CPU (riavvio richiesto) - Set Profile on Exit - Imposta Profilo all'Uscita - - - + Shared SMBus Access (restart required) Accesso SMBus Condiviso (riavvio richiesto) - Set Server Host - Imposta Host Server - - - + Language Lingua - + Disable Key Expansion Disabilita espansione chiavi in visuale dispositivi - + Hex Format Formato Esadecimale - + Enable Start at Login Abilita l'avvio all'accesso - + Start OpenRGB on login Avvia OpenRGB all'accesso - + Start minimized to the system tray Avvia ridotto al sistema tray - + Additional command line arguments to pass to OpenRGB when starting on login Argomenti aggiuntivi da riga di comando da passare a OpenRGB al momento del lancio all'accesso - + Language for the user interface Lingua per l'interfaccia utente - + Keep OpenRGB active in the system tray when closing the main window Mantieni OpenRGB attivo nell'area di notifica quando si chiude la finestra principale - + Use a monochrome icon in the system tray instead of a full color icon Utilizza un'icona in toni di grigio nell'area di notifica del sistema invece di un'icona a colori pieni - + Select #BBGGRR or #RRGGBB format for hex display and input Seleziona il formato #BBGGRR o #RRGGBB per la visualizzazione e l'input esadecimale - + Compact Tabs Schede compatte - + Display sidebar tabs as icons only Visualizza le schede della barra laterale come icone solo - + Tabs on Top Schede in alto - + Display tabs on top instead of on the left Visualizza le schede in alto invece che a sinistra - + Show LED View by Default Mostra visuale LED come predefinita - + Drivers Driver - Set Profile on Suspend - Imposta Profilo alla Sospensione - - - Set Profile on Resume - Imposta Profilo alla Ripresa - - - + Enable Log File Abilita File di Registro - - A problem occurred enabling Start at Login. - Si è verificato un problema nell'attivazione dell'Avvio all'Accesso. - English - US Italiano - - System Default - Predefinita di Sistema - Load Profile on Exit @@ -2897,16 +2203,36 @@ + Load Profile on Service Shutdown + Carica profilo all&apos;arresto del servizio + + + + Profile to load when the OpenRGB background service shuts down + Profilo da caricare quando il servizio in background di OpenRGB si arresta + + + + Load Profile on Service Startup + Carica profilo all'avvio del servizio + + + + Profile to load when the OpenRGB background service starts up + Profilo da caricare quando il servizio in background di OpenRGB viene avviato + + + Load Profile on Suspend Carica profilo in sospensione - + Profile to load before system enters sleep mode Profilo da caricare prima che il sistema entri in modalità di sospensione - + Profile Manager Gestione profili diff --git a/qt/i18n/OpenRGB_ja_JP.ts b/qt/i18n/OpenRGB_ja_JP.ts index 8351e7ffe..77233dbf5 100644 --- a/qt/i18n/OpenRGB_ja_JP.ts +++ b/qt/i18n/OpenRGB_ja_JP.ts @@ -92,7 +92,7 @@ ポート: - + No serial ports found シリアルポートが見つかりません @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>一部の内部デバイスが検出されない可能性があります：</h2><p>I2CまたはSMBusインターフェースの1つ以上が初期化に失敗しました。</p><p><b>I2CまたはSMBusがない場合、RGB DRAMモジュール、一部のマザーボードのオンボードRGB照明、およびRGBグラフィックカードはOpenRGBで利用できません。</b></p><h4>これを修正する方法：</h4><p>Windowsでは、PawnIOドライバの読み込みに失敗していることが原因であることが一般的です。</p><p>PawnIOをまずインストールし、その後OpenRGBを管理者として実行する必要があります。</p><p>このメッセージが繰り返し表示される場合は、<a href='https://help.openrgb.org/'>help.openrgb.org</a>で追加のトラブルシューティング手順を参照してください。<br></p><h3>デスクトップで内部RGBを使用していない場合は、このメッセージはあなたにとって重要ではありません。</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>一部の内部デバイスが検出されない可能性があります：</h2><p>I2CまたはSMBusインターフェースの1つ以上が初期化に失敗しました。</p><p><b>I2CまたはSMBusがない場合、RGB DRAMモジュール、一部のマザーボードのオンボードRGB照明、およびRGBグラフィックカードはOpenRGBで利用できません。</b></p><h4>これを修正する方法：</h4><p>Linuxでは、通常i2c-devモジュールが読み込まれていないことが原因です。</p><p>マザーボードに適したi2cドライバー（AMDシステムでは通常i2c-piix4、Intelシステムではi2c-i801）とともにi2c-devモジュールを読み込む必要があります。</p><p>このメッセージが繰り返し表示される場合は、<a href='https://help.openrgb.org/'>help.openrgb.org</a>で追加のトラブルシューティング手順をご覧ください。<br></p><h3>デスクトップで内部RGBを使用していない場合は、このメッセージはあなたにとって重要ではありません。</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>警告:</h2><p>OpenRGBのudevルールがインストールされていません。</p><p>OpenRGBをrootとして実行しない限り、ほとんどのデバイスが利用できません。</p><p>AppImage、Flatpak、またはOpenRGBの自分でコンパイルしたバージョンを使用している場合、udevルールを手動でインストールする必要があります。</p><p><a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>を参照して、udevルールを手動でインストールしてください。</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>警告:</h2><p>複数のOpenRGB udevルールがインストールされています。</p><p>udevルールファイル60-openrgb.rulesは、/etc/udev/rules.dと/usr/lib/udev/rules.dの両方にインストールされています。</p><p>複数のudevルールファイルは競合する可能性があります。どちらか一方を削除することをお勧めします。</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>警告:</h2><p>I²C/SMBusインターフェースの1つ以上が初期化に失敗しました。</p><p>初期化に失敗したインターフェースによって、OpenRGBでは一部のRGB DRAMモジュール、一部のマザーボードのオンボードRGB照明、およびRGBグラフィックカードが利用できない場合があります。</p><p>Windowsでは、PawnIOドライバの読み込みに失敗していることが原因であることが一般的です。</p><p>OpenRGBがこれらのデバイスにアクセスできるようにするには、<a href='https://pawnio.eu/'>https://pawnio.eu</a>からPawnIOをインストールし、OpenRGBを管理者として実行するか、システムサービスとして実行する必要があります。</p><p>上記で挙げたデバイスを使用していない場合は、このメッセージを無視しても問題ありません。</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>警告:</h2><p>I2C/SMBusインターフェースの1つ以上が初期化に失敗しました。</p><p>初期化に失敗したインターフェースによって、OpenRGBでは一部のRGB DRAMモジュール、一部のマザーボードのオンボードRGB照明、およびRGBグラフィックカードが利用できない可能性があります。</p><p>Linuxでは、通常i2c-devモジュールが読み込まれていないことが原因です。</p><p>OpenRGBがこれらのデバイスにアクセスできるようにするには、i2c-devモジュールと、マザーボードに適した正しいI2Cドライバモジュール（AMDシステムでは通常i2c-piix4、Intelシステムではi2c-i801）を読み込む必要があります。</p><p>上記で挙げたデバイスを使用していない場合は、このメッセージを無視しても問題ありません。</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>警告:</h2><p>OpenRGB の udev ルールがインストールされていません。</p><p>OpenRGB を root として実行しない限り、ほとんどのデバイスが利用できません。</p><p>AppImage、Flatpak、または OpenRGB の自作バージョンを使用している場合は、udev ルールを手動でインストールする必要があります。</p><p><a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> を参照して、udev ルールを手動でインストールしてください。</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>警告:</h2><p>OpenRGB の udev ルールがインストールされていません。</p><p>OpenRGB をシステムサービスとして、または root として実行しない限り、ほとんどのデバイスは利用できません。</p><p>AppImage、Flatpak、または OpenRGB の自作バージョンを使用している場合は、udev ルールを手動でインストールする必要があります。</p><p><a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> を参照して、udev ルールを手動でインストールしてください。</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>警告:</h2><p>複数の OpenRGB udev ルールがインストールされています。</p><p>udev ルールファイル 60-openrgb.rules は、/etc/udev/rules.d と /usr/lib/udev/rules.d の両方にインストールされています。</p><p>複数の udev ルールファイルは競合する可能性があるため、どちらか一方を削除することをお勧めします。</p> @@ -363,7 +347,7 @@ QMK (VialRGBプロトコル) - + Serial Device シリアルデバイス @@ -499,44 +483,19 @@ 接続を保存 - + Rescan Devices デバイス再検索 - + Disconnect 切断 - - - OpenRGBDMXSettingsEntry - Name: - 名前: - - - Keepalive Time: - Keepalive Time: - - - Port: - ポート: - - - - OpenRGBDMXSettingsPage - - Add - 追加 - - - Remove - 削除 - - - Save - 保存 + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGBはローカルクライアントモードです。ローカル接続は切断されない場合があります。 @@ -548,44 +507,64 @@ + Device Configuration + デバイス構成 + + + + Device Name: + デバイス名: + + + Device-Specific Configuration デバイス固有の設定 + + + Reset Device Configuration + デバイス設定をリセット + OpenRGBDeviceInfoPage - + Name: 名前: - + Vendor: ベンダー: - + Type: タイプ: - + + Display Name: + 表示名: + + + Description: 説明: - + Version: バージョン: - + Location: ロケーション: - + Serial: シリアル: @@ -683,7 +662,7 @@ 明度(V): - + Edit Zone ゾーンの編集 @@ -704,7 +683,7 @@ - + Save To Device デバイスに保存 @@ -719,113 +698,133 @@ 編集 - + Set individual LEDs to static colors. Safe for use with software-driven effects. 個々のLEDを固定に設定する。 ソフトウェア駆動のエフェクトで使用しても安全です。 - + Set individual LEDs to static colors. Not safe for use with software-driven effects. 個々のLEDを固定に設定する。 ソフトウェア駆動のエフェクトで使用すると不安定な動作の原因になります。 - + Sets the entire device or a zone to a single color. デバイス全体またはゾーンを1色に設定。 - + Gradually fades between fully off and fully on. 消灯と点灯の間で徐々にフェードイン・オフします。 - + Abruptly changes between fully off and fully on. 消灯と点灯を繰り返す。 - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. 全色を徐々に循環させます。 デバイスのライトはすべて同じ色になります。 - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. 全色のスペクトルを徐々に循環させる。 動く虹のパターンを作り出す。 - + Flashes lights when keys or buttons are pressed. キーやボタンが押されると、ライトが点滅します。 - - + + Entire Device LED全て - + Edit Device - + デバイスの編集 - + Entire Zone ゾーン全て - + Left 左 - + Right 右 - + Up 上 - + Down 下 - + Horizontal 水平 - + Vertical 垂直 - + + Up-Left + 上-左 + + + + Up-Right + 右上 + + + + Down-Left + 下-左 + + + + Down-Right + 下-右 + + + Saved To Device デバイスに保存しました - + Saving Not Supported 設定の保存が非対応です - + All Zones 全てのゾーン - + Mode Specific 特定のモード - + Entire Segment セグメント全体 @@ -864,7 +863,8 @@ - + + Rescan Devices デバイス再検索 @@ -877,14 +877,10 @@ - + Delete Profile プロファイル削除 - - Load Profile - プロファイルをロード - OpenRGB is detecting devices... @@ -906,164 +902,124 @@ 名前をつけてプロファイルを保存 - + + Show/Hide 表示/隠す - + + Profiles プロファイル - + + Quick Colors 簡易色指定 - + + Red 赤 - + + Yellow 黄色 - + + Green 緑 - + + Cyan シアン - + + Blue 青 - + + Magenta マゼンタ - + + White 白 - + + Lights Off 消灯 - + + Exit 終了 - + Plugins プラグイン - + About OpenRGB OpenRGBについて - + Manually Added Devices 手動で追加されたデバイス - Software - ソフトウェア - - - + Supported Devices 対応デバイス - + General Settings 一般設定 - DMX Devices - DMXデバイス - - - E1.31 Devices - E1.31デバイス - - - Kasa Smart Devices - Kasa Smart デバイス - - - LIFX Devices - LIFX デバイス - - - Philips Hue Devices - フィリップスHueデバイス - - - Philips Wiz Devices - フィリップスWizデバイス - - - OpenRGB QMK Protocol - OpenRGB QMK プロトコル - - - Serial Devices - シリアルデバイス - - - Yeelight Devices - Yeelightデバイス - - - Nanoleaf Devices - Nanoleaf デバイス - - - Elgato KeyLight Devices - Elgato KeyLight デバイス - - - Elgato LightStrip Devices - Elgato LightStrip デバイス - - - + SMBus Tools SMBus ツール - + SDK Client SDKクライアント - + SDK Server SDKサーバー - + Do you really want to delete this profile? 本当にプロファイルを削除しますか? - + Log Console ログコンソール @@ -1081,182 +1037,6 @@ システム - - OpenRGBE131SettingsEntry - - Start Channel: - Start Channel: - - - Number of LEDs: - LED数: - - - Start Universe: - Start Universe: - - - Name: - 名前: - - - Matrix Order: - Matrix Order: - - - Matrix Height: - Matrix Height: - - - Matrix Width: - Matrix Width: - - - Type: - タイプ: - - - IP (Unicast): - IP (ユニキャスト): - - - Universe Size: - Universe Size: - - - Keepalive Time: - Keepalive Time: - - - RGB Order: - RGB順序: - - - Single - Single - - - Linear - リニア - - - Matrix - マトリックス - - - Horizontal Top Left - Horizontal Top Left - - - Horizontal Top Right - Horizontal Top Right - - - Horizontal Bottom Left - Horizontal Bottom Left - - - Horizontal Bottom Right - Horizontal Bottom Right - - - Vertical Top Left - Vertical Top Left - - - Vertical Top Right - Vertical Top Right - - - Vertical Bottom Left - Vertical Bottom Left - - - Vertical Bottom Right - Vertical Bottom Right - - - - OpenRGBE131SettingsPage - - Add - 追加 - - - Remove - 削除 - - - Save - 保存 - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - 追加 - - - Remove - 削除 - - - Save - 保存 - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - 追加 - - - Remove - 削除 - - - Save - 保存 - - - - OpenRGBGoveeSettingsEntry - - IP: - IP: - - - - OpenRGBGoveeSettingsPage - - Add - 追加 - - - Remove - 削除 - - - Save - 保存 - - OpenRGBHardwareIDsDialog @@ -1285,58 +1065,6 @@ ベンダー - - OpenRGBKasaSmartSettingsEntry - - IP: - IP: - - - Name - 名前 - - - - OpenRGBKasaSmartSettingsPage - - Add - 追加 - - - Remove - 削除 - - - Save - 保存 - - - - OpenRGBLIFXSettingsEntry - - IP: - IP: - - - Name - 名前 - - - - OpenRGBLIFXSettingsPage - - Add - 追加 - - - Remove - 削除 - - - Save - 保存 - - OpenRGBLogConsolePage @@ -1373,143 +1101,6 @@ 幅: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - 新しいNanoleafデバイス - - - IP address: - IPアドレス: - - - Port: - ポート: - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP: - - - Port: - ポート: - - - Auth Key: - Auth Key: - - - Unpair - ペア解除 - - - Pair - ペア - - - - OpenRGBNanoleafSettingsPage - - Add - 追加 - - - Remove - 削除 - - - Scan - スキャン - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - ペアリングするには、LEDがパターン状に点滅し始めるまでオン-オフボタンを5～7秒間押し続け、30秒以内に"ペア" ボタンをクリックします。 - - - - OpenRGBPhilipsHueSettingsEntry - - Entertainment Mode: - Entertainment Mode: - - - Auto Connect Group: - Auto Connect Group: - - - IP: - IP: - - - Client Key: - Client Key: - - - Username: - Username: - - - MAC: - MAC: - - - Unpair Bridge - Unpair Bridge - - - - OpenRGBPhilipsHueSettingsPage - - Remove - 削除 - - - Add - 追加 - - - Save - 保存 - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Hueエントリーを追加して保存したら、OpenRGBを再起動し、HueブリッジのSyncボタンを押してペアリングします。 - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP: - - - Average - 平均 - - - Minimum - 最小限 - - - - OpenRGBPhilipsWizSettingsPage - - Add - 追加 - - - Remove - 削除 - - - Save - 保存 - - OpenRGBPluginsEntry @@ -1552,10 +1143,6 @@ API Version: APIバージョン: - - API Version Value - APIバージョン番号 - OpenRGBPluginsPage @@ -1566,7 +1153,7 @@ - + Remove Plugin プラグイン削除 @@ -1576,37 +1163,37 @@ <html><head/><body>プラグインをお探しですか？ でしたら公式リストをご覧ください。<a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin OpenRGB用プラグインをインストール - + Plugin files (*.dll *.dylib *.so *.so.*) プラグインファイル (*.dll *.dylib *.so *.so.*) - + Replace Plugin プラグインを入れ替え - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? このファイル名のプラグインはすでにインストールされています。 本当にこのプラグインを置き換えますか? - + Are you sure you want to remove this plugin? 本当にこのプラグインを削除しますか? - + Restart Needed 再起動が必要 - + The plugin will be fully removed after restarting OpenRGB. OpenRGB を再起動すると、プラグインは完全に削除されます。 @@ -1673,14 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - プロファイル名 - - - Save to an existing profile: - 既存プロファイルへ保存: - Profile Selection @@ -1697,36 +1276,6 @@ 新規プロファイル作成: - - OpenRGBQMKORGBSettingsEntry - - Name: - 名前: - - - USB PID: - USB PID: - - - USB VID: - USB VID: - - - - OpenRGBQMKORGBSettingsPage - - Add - 追加 - - - Remove - 削除 - - - Save - 保存 - - OpenRGBSegmentExportDialog @@ -1755,44 +1304,6 @@ デバイス名（任意）： - - OpenRGBSerialSettingsEntry - - Baud: - Baud: - - - Name: - 名前: - - - Number of LEDs: - LED数: - - - Port: - ポート: - - - Protocol: - プロトコル: - - - - OpenRGBSerialSettingsPage - - Add - 追加 - - - Remove - 削除 - - - Save - 保存 - - OpenRGBServerInfoPage @@ -2018,10 +1529,6 @@ Address: アドレス: - - Read Device - デバイス読み取り - SMBus Dumper: @@ -2074,10 +1581,6 @@ Dump Device Dump Device - - SMBus Reader: - SMBus リーダー: - Addr: @@ -2094,58 +1597,8 @@ サイズ: - - OpenRGBYeelightSettingsEntry - - IP: - IP: - - - ? - ? - - - Music Mode: - 音楽モード: - - - Override host IP: - ホストのIPにオーバーライド: - - - Left blank for auto discovering host ip - ホストIPを自動検出する場合は空白にします - - - Choose an IP... - IPを一つ選択... - - - Choose the correct IP for the host - ホストのIPを正しく選択する - - - - OpenRGBYeelightSettingsPage - - Add - 追加 - - - Remove - 削除 - - - Save - 保存 - - OpenRGBZoneEditorDialog - - Resize Zone - ゾーンリサイズ - Add Segment @@ -2255,14 +1708,6 @@ Ignore 無視 - - Zones Resizer - ゾーンリサイザー - - - Resize the zones - ゾーンをリサイズ - Controller @@ -2439,7 +1884,7 @@ ポート: - + No serial ports found シリアルポートが見つかりません @@ -2447,337 +1892,277 @@ Settings - + Load Window Geometry ウィンドウジオメトリをロード - + Minimize on Close 閉じる時は最小化させる - + Enable Start at Login ログイン時に起動する - + Start OpenRGB on login ログイン時にOpenRGBを起動する - + Start minimized to the system tray システムトレイに最小化して起動 - + Additional command line arguments to pass to OpenRGB when starting on login ログイン時にOpenRGBを起動するときに渡す追加のコマンドライン引数 - + Language for the user interface ユーザーインターフェースの言語 - + Keep OpenRGB active in the system tray when closing the main window メインウィンドウを閉じたときにOpenRGBをシステムトレイでアクティブにします - + Use a monochrome icon in the system tray instead of a full color icon システムトレイにフルカラーのアイコンの代わりにモノクロのアイコンを使用する - + Select #BBGGRR or #RRGGBB format for hex display and input #BBGGRR または #RRGGBB 形式を、16進数の表示および入力に選択してください - + Compact Tabs コンパクトタブ - + Display sidebar tabs as icons only サイドバーのタブをアイコンのみとして表示 - + Tabs on Top タブを上に - + Display tabs on top instead of on the left タブを左ではなく上に表示する - + Numerical Labels 数値ラベル - + Display numerical labels for otherwise non-labeled LEDs in the LED view LEDビューでラベルがついていないLEDに数値ラベルを表示する - + Window Geometry ウィンドウの幾何学 - + Save on Exit ウィンドウジオメトリを閉じるときに保存 - + Drivers ドライバー - 90000 - 90000 - - - Start Server - サーバースタート - - - + HID Safe Mode HIDセーフモード - + Use an alternate method for detecting HID devices HIDデバイスの検出に代替方法を使用する - + Initial Detection Delay (ms) 初期検出遅延 (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started 起動時にデバイスの検出を開始するまでの待ち時間（ミリ秒） - + Detection 検出 - + Enable Log Console ログコンソールを有効にする - + Log Level ログレベル - + Log File Count Limit ログファイルの数の上限 - + Maximum number of log files to keep, 0 for no limit 保持するログファイルの最大数、0を指定すると制限なし - + Log Manager ログ マネージャー - + Serve All Controllers すべてのコントローラを提供する - + Include controllers provided by client connections and plugins クライアント接続およびプラグインによって提供されるコントローラーを含める - + Default Host デフォルトホスト - + Default Port デフォルトポート - + Legacy Workaround レガシーワークアラウンド - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets 一部の古いSDK実装向けの回避策。特定のパケットに対して不正確なパケットサイズが送信される問題に対処するもの - + Server サーバー - + Custom Arguments カスタム引数 - Start Client - クライアントスタート - - - Start at Login Settings: - ログイン時に起動設定: - - - Log Manager Settings: - ログマネージャ設定: - - - Start at Login Status - Start at Login Status - - - Set Profile on Exit - 終了時にプロファイルをセット - - - + Shared SMBus Access (restart required) SMBus Accessを共有 (再起動が必要) - Set Server Host - サーバーホストを設定 - - - Set Server Port - サーバーポートをセット - - - + Language 言語 - Load Profile - プロファイルをロード - - - Drivers Settings - ドライバ設定 - - - + Run Zone Checks on Rescan 再スキャン時に動作ゾーンをチェック - User Interface Settings: - ユーザーインターフェイス設定: - - - + Start at Login ログイン時に起動 - + Start Minimized 最小化で起動させる - + Save window geometry on exit 終了時にウィンドウの幾何学を保存する - + X X - + Y Y - + Width 幅 - + Height 高さ - + User Interface ユーザーインターフェース - + SMBus Sleep Mode (restart required) SMBus スリープモード（再起動が必要） - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: CPU使用率低減 (再起動が必要) - + Monochrome Tray Icon トレイアイコンをグレースケールで表示させる - Open Settings Folder - 設定フォルダを開く - - - + Disable Key Expansion デバイスビューでキー拡張を無効にする - + Hex Format Hex フォーマット - + Show LED View by Default デフォルトでLEDビューを表示する - Set Profile on Suspend - スリープ時にプロファイルをセット - - - Set Profile on Resume - 復帰時にプロファイルをセット - - - + Enable Log File ログファイルを有効にする @@ -2786,14 +2171,6 @@ English - US 日本語 - - System Default - システム - - - A problem occurred enabling Start at Login. - Start At Loginを有効にする際に問題が発生しました。 - Load Profile on Exit @@ -2826,16 +2203,36 @@ + Load Profile on Service Shutdown + サービスシャットダウン時にプロファイルを読み込む + + + + Profile to load when the OpenRGB background service shuts down + OpenRGBバックグラウンドサービスがシャットダウンするときに読み込むプロファイル + + + + Load Profile on Service Startup + サービス起動時にプロファイルを読み込む + + + + Profile to load when the OpenRGB background service starts up + OpenRGBバックグラウンドサービスが起動時に読み込むプロファイル + + + Load Profile on Suspend スリープ時にプロファイルを読み込む - + Profile to load before system enters sleep mode システムがスリープモードに入る前に読み込むプロファイル - + Profile Manager プロファイル マネージャー diff --git a/qt/i18n/OpenRGB_ko_KR.ts b/qt/i18n/OpenRGB_ko_KR.ts index 83b1a3eac..fc3c5927e 100644 --- a/qt/i18n/OpenRGB_ko_KR.ts +++ b/qt/i18n/OpenRGB_ko_KR.ts @@ -92,7 +92,7 @@ 포트: - + No serial ports found 직렬 포트를 찾을 수 없습니다 @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>일부 내부 장치가 감지되지 않을 수 있습니다:</h2><p>I2C 또는 SMBus 인터페이스 하나 이상이 초기화에 실패했습니다.</p><p><b>I2C 또는 SMBus가 없으면 RGB DRAM 모듈, 일부 메인보드의 내장 RGB 조명, RGB 그래픽 카드는 OpenRGB에서 사용할 수 없습니다.</b></p><h4>이 문제를 해결하는 방법:</h4><p>Windows에서는 일반적으로 PawnIO 드라이버가 로드되지 못한 경우에 발생합니다.</p><p>먼저 <a href='https://pawnio.eu/'>PawnIO</a>를 설치해야 하며, 이후 이 장치에 액세스하려면 OpenRGB을 관리자 권한으로 실행해야 합니다.</p><p>이 메시지가 계속 나타난다면 <a href='https://help.openrgb.org/'>help.openrgb.org</a>에서 추가 문제 해결 단계를 참조하십시오.<br></p><h3>데스크탑에서 내부 RGB를 사용하지 않는다면 이 메시지는 당신에게 중요하지 않습니다.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>일부 내부 장치는 감지되지 않을 수 있습니다:</h2><p>I2C 또는 SMBus 인터페이스 하나 이상이 초기화에 실패했습니다.</p><p><b>I2C 또는 SMBus가 없으면 RGB DRAM 모듈, 일부 메인보드의 내장 RGB 조명, RGB 그래픽 카드는 OpenRGB에서 사용할 수 없습니다.</b></p><h4>이 문제를 해결하는 방법:</h4><p>리눅스에서는 일반적으로 i2c-dev 모듈이 로드되지 않았기 때문입니다.</p><p>메인보드에 맞는 올바른 I2C 드라이버와 함께 i2c-dev 모듈을 로드해야 합니다. 일반적으로 AMD 시스템에서는 i2c-piix4, 인텔 시스템에서는 i2c-i801 드라이버를 사용합니다.</p><p>이 메시지가 계속 나타난다면 <a href='https://help.openrgb.org/'>help.openrgb.org</a>에서 추가 문제 해결 단계를 확인하십시오.<br></p><h3>데스크탑에서 내부 RGB를 사용하지 않는다면 이 메시지는 중요하지 않습니다.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>경고:</h2><p>OpenRGB의 udev 규칙이 설치되어 있지 않습니다.</p><p>OpenRGB를 루트로 실행하지 않는 한 대부분의 장치가 사용할 수 없습니다.</p><p>AppImage, Flatpak 또는 OpenRGB의 자체 컴파일 버전을 사용하는 경우 udev 규칙을 수동으로 설치해야 합니다.</p><p><a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>에서 udev 규칙을 수동으로 설치할 수 있습니다.</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>경고:</h2><p>여러 개의 OpenRGB udev 규칙이 설치되어 있습니다.</p><p>udev 규칙 파일 60-openrgb.rules는 /etc/udev/rules.d 및 /usr/lib/udev/rules.d 모두에 설치되어 있습니다.</p><p>여러 udev 규칙 파일은 충돌할 수 있으므로, 하나를 제거하는 것이 좋습니다.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>경고:</h2><p>I2C/SMBus 인터페이스 하나 이상이 초기화에 실패했습니다.</p><p>초기화에 실패한 인터페이스에 따라 OpenRGB에서 일부 RGB DRAM 모듈, 일부 메인보드의 내장 RGB 조명, RGB 그래픽 카드가 사용되지 않을 수 있습니다.</p><p>Windows에서는 일반적으로 PawnIO 드라이버를 로드하는 데 실패했기 때문에 발생합니다.</p><p>OpenRGB가 이러한 장치에 액세스할 수 있도록 하려면 https://pawnio.eu에서 PawnIO를 설치하고 OpenRGB를 관리자 권한으로 실행하거나 시스템 서비스로 실행해야 합니다.</p><p>위에 나열된 장치를 사용하지 않는다면 이 메시지는 무시해도 안전합니다.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>경고:</h2><p>하나 이상의 I2C/SMBus 인터페이스가 초기화에 실패했습니다.</p><p>초기화에 실패한 인터페이스에 따라 OpenRGB에서 일부 RGB DRAM 모듈, 일부 메인보드의 내장 RGB 조명, RGB 그래픽 카드가 사용되지 않을 수 있습니다.</p><p>Linux에서 이는 일반적으로 i2c-dev 모듈이 로드되지 않았기 때문입니다.</p><p>OpenRGB가 이러한 장치에 액세스할 수 있도록 i2c-dev 모듈과 메인보드에 적합한 I2C 드라이버 모듈을 함께 로드해야 합니다. 이는 일반적으로 AMD 시스템의 경우 i2c-piix4, Intel 시스템의 경우 i2c-i801입니다.</p><p>위에 나열된 장치를 사용하지 않는다면 이 메시지는 무시해도 안전합니다.</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>경고:</h2><p>OpenRGB의 udev 규칙이 설치되어 있지 않습니다.</p><p>OpenRGB를 루트로 실행하지 않는 한 대부분의 장치가 사용할 수 없습니다.</p><p>AppImage, Flatpak 또는 OpenRGB의 자체 컴파일 버전을 사용하는 경우 udev 규칙을 수동으로 설치해야 합니다.</p><p><a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>에서 udev 규칙을 수동으로 설치할 수 있습니다.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>경고:</h2><p>OpenRGB udev 규칙이 설치되어 있지 않습니다.</p><p>시스템 서비스로 또는 루트로 OpenRGB를 실행하지 않는 한 대부분의 장치가 사용할 수 없습니다.</p><p>AppImage, Flatpak 또는 OpenRGB의 자체 컴파일 버전을 사용하는 경우 udev 규칙을 수동으로 설치해야 합니다.</p><p><a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>에서 udev 규칙을 수동으로 설치할 수 있습니다.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>경고:</h2><p>여러 개의 OpenRGB udev 규칙이 설치되어 있습니다.</p><p>udev 규칙 파일 60-openrgb.rules는 /etc/udev/rules.d 및 /usr/lib/udev/rules.d 모두에 설치되어 있습니다.</p><p>여러 udev 규칙 파일은 충돌할 수 있으므로, 하나를 제거하는 것이 좋습니다.</p> @@ -363,7 +347,7 @@ QMK (VialRGB 프로토콜) - + Serial Device 직렬 장치 @@ -499,60 +483,19 @@ 연결 저장 - + Rescan Devices 장치 다시 스캔 - + Disconnect 연결 끊기 - - - OpenRGBDMXSettingsEntry - Brightness Channel: - 밝기 채널: - - - Blue Channel: - 청색 채널: - - - Name: - 이름: - - - Green Channel: - 녹색 채널: - - - Red Channel: - 적색 채널: - - - Keepalive Time: - 지속 시간: - - - Port: - 포트: - - - - OpenRGBDMXSettingsPage - - Add - 추가 - - - Remove - 삭제 - - - Save - 저장 + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB는 로컬 클라이언트 모드에 있습니다. 로컬 연결은 끊기지 않을 수 있습니다. @@ -564,44 +507,64 @@ + Device Configuration + 기기 설정 + + + + Device Name: + 기기 이름: + + + Device-Specific Configuration 기기별 설정 + + + Reset Device Configuration + 기기 설정 초기화 + OpenRGBDeviceInfoPage - + Name: 이름: - + Vendor: 제조업체: - + Type: 유형: - + + Display Name: + 표시 이름: + + + Description: 설명: - + Version: 버전: - + Location: 위치: - + Serial: 시리얼: @@ -699,7 +662,7 @@ 명도(V): - + Edit Zone 존 편집 @@ -720,7 +683,7 @@ - + Save To Device 장치에 저장 @@ -735,113 +698,133 @@ HEX: - + Set individual LEDs to static colors. Safe for use with software-driven effects. 개별 LED를 정적 색상으로 설정합니다. 소프트웨어 기반 이펙트와 같이 사용해도 안전합니다. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. 개별 LED를 정적 색상으로 설정합니다. 소프트웨어 기반 이펙트와 같이 사용하기에는 안전하지 않습니다. - + Sets the entire device or a zone to a single color. 전체 장치 혹은 구역을 한가지 색상으로 설정합니다. - + Gradually fades between fully off and fully on. 완전히 꺼지고 켜진 상태 사이에서 서서히 페이드됩니다. - + Abruptly changes between fully off and fully on. 완전히 꺼지고 켜진 상태 사이에서 갑자기 변경됩니다. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. 전체 색상 스펙트럼을 서서히 순환합니다. 장치의 모든 조명이 같은 색으로 표시됩니다. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. 전체 색상 스펙트럼을 서서히 순환합니다. 움직이는 무지개 무늬를 나타냅니다. - + Flashes lights when keys or buttons are pressed. 키나 버튼을 누르면 불빛이 깜박입니다. - - + + Entire Device 장치 전체 - + Edit Device - + 기기 편집 - + Entire Zone 구역 전체 - + Left 왼쪽 - + Right 오른쪽 - + Up 위 - + Down 아래 - + Horizontal 가로 - + Vertical 세로 - + + Up-Left + 상-좌 + + + + Up-Right + 우상 + + + + Down-Left + 왼쪽 아래 + + + + Down-Right + 하단-우측 + + + Saved To Device 장치에 저장됨 - + Saving Not Supported 저장이 지원되지 않습니다 - + All Zones 모든 구역 - + Mode Specific 특정 모드 - + Entire Segment 세그먼트 전체 @@ -880,7 +863,8 @@ - + + Rescan Devices 장치 다시 스캔 @@ -893,14 +877,10 @@ - + Delete Profile 프로파일 삭제 - - Load Profile - 프로파일 불러오기 - OpenRGB is detecting devices... @@ -922,167 +902,127 @@ 다른 이름으로 프로파일 저장 - + + Show/Hide 표시/숨김 - + + Profiles 프로파일 - + + Quick Colors 간편 색상 지정 - + + Red Red - + + Yellow Yellow - + + Green Green - + + Cyan Cyan - + + Blue Blue - + + Magenta Magenta - + + White White - + + Lights Off 조명 끄기 - + + Exit 종료 - + Plugins 플러그인 - + About OpenRGB 오픈RGB 정보 - + General Settings 일반 설정 - + Manually Added Devices 수동으로 추가된 장치 - E1.31 Devices - E1.31 장치 - - - Philips Hue Devices - 필립스 Hue 장치 - - - Philips Wiz Devices - 필립스 Wiz 장치 - - - OpenRGB QMK Protocol - OpenRGB QMK 프로토콜 - - - Serial Devices - 시리얼 장치 - - - Yeelight Devices - Yeelight 장치 - - - + SMBus Tools SMBus 도구 - + SDK Client SDK 클라이언트 - + SDK Server SDK 서버 - + Do you really want to delete this profile? 정말로 이 프로파일을 삭제하시겠습니까? - + Log Console 로그 콘솔 - LIFX Devices - LIFX 장치 - - - Nanoleaf Devices - Nanoleaf 장치 - - - Elgato KeyLight Devices - Elgato KeyLight 장치 - - - Elgato LightStrip Devices - Elgato LightStrip 장치 - - - + Supported Devices 지원되는 장치 - - Software - 소프트웨어 - - - DMX Devices - DMX 장치 - - - Kasa Smart Devices - Kasa Smart 장치 - OpenRGBDynamicSettingsWidget @@ -1097,167 +1037,6 @@ 시스템 기본값 - - OpenRGBE131SettingsEntry - - Start Channel: - 시작 채널: - - - Number of LEDs: - LED 개수: - - - Start Universe: - 시작 Universe: - - - Name: - 이름: - - - Matrix Order: - 매트릭스 순서: - - - Matrix Height: - 매트릭스 높이: - - - Matrix Width: - 매트릭스 너비: - - - Type: - 유형: - - - IP (Unicast): - IP (Unicast): - - - Universe Size: - Universe 크기: - - - Keepalive Time: - 지속 시간: - - - RGB Order: - RGB 순서: - - - Single - 단일 - - - Linear - 선형 - - - Matrix - 매트릭스 - - - Horizontal Top Left - 가로 왼쪽 상단 - - - Horizontal Top Right - 가로 오른쪽 상단 - - - Horizontal Bottom Left - 가로 왼쪽 하단 - - - Horizontal Bottom Right - 가로 오른쪽 하단 - - - Vertical Top Left - 세로 왼쪽 상단 - - - Vertical Top Right - 세로 오른쪽 상단 - - - Vertical Bottom Left - 세로 왼쪽 하단 - - - Vertical Bottom Right - 세로 오른쪽 하단 - - - - OpenRGBE131SettingsPage - - Add - 추가 - - - Remove - 제거 - - - Save - 저장 - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - 추가 - - - Remove - 삭제 - - - Save - 저장 - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - 추가 - - - Remove - 삭제 - - - Save - 저장 - - - - OpenRGBGoveeSettingsPage - - Save - 저장 - - OpenRGBHardwareIDsDialog @@ -1286,58 +1065,6 @@ 제조업체 - - OpenRGBKasaSmartSettingsEntry - - IP: - IP: - - - Name - 이름 - - - - OpenRGBKasaSmartSettingsPage - - Add - 추가 - - - Remove - 제거 - - - Save - 저장 - - - - OpenRGBLIFXSettingsEntry - - IP: - IP: - - - Name - 이름 - - - - OpenRGBLIFXSettingsPage - - Add - 추가 - - - Remove - 제거 - - - Save - 저장 - - OpenRGBLogConsolePage @@ -1374,143 +1101,6 @@ 너비: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - 새로운 Nanoleaf 장치 - - - IP address: - IP 주소: - - - Port: - 포트: - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP: - - - Port: - 포트: - - - Auth Key: - 인증 키: - - - Unpair - 페어링 해제 - - - Pair - 페어링 - - - - OpenRGBNanoleafSettingsPage - - Scan - 스캔 - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - 페어링을 하려면 온오프 버튼을 5-7초 LED가 규칙적으로 깜빡이기 시작할 때 까지 누르세요, 그리고 30초 내로 "페어링" 버튼을 누르세요. - - - Add - 추가추가 - - - Remove - 제거 - - - - OpenRGBPhilipsHueSettingsEntry - - IP: - IP: - - - Entertainment Mode: - 엔터테이먼트 모드: - - - Username: - Username: - - - Client Key: - 클라이언트 키: - - - Unpair Bridge - 브릿지 페어링 해제 - - - MAC: - MAC 주소: - - - Auto Connect Group: - 자동 연결 그룹: - - - - OpenRGBPhilipsHueSettingsPage - - Remove - 제거 - - - Add - 추가 - - - Save - 저장 - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Hue 항목을 추가하고 저장한 후에 OpenRGB를 재시작하고 Hue Bridge의 Sync 버튼을 눌러 페어링하세요. - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP: - - - Use Cool White - Cool White 사용 - - - Use Warm White - Warm White 사용 - - - - OpenRGBPhilipsWizSettingsPage - - Add - 추가 - - - Remove - 제거 - - - Save - 저장 - - OpenRGBPluginsEntry @@ -1553,10 +1143,6 @@ API Version: API 버전: - - API Version Value - API 버전 값 - OpenRGBPluginsPage @@ -1567,7 +1153,7 @@ - + Remove Plugin 플러그인 제거 @@ -1577,37 +1163,37 @@ <html><head/><body>플러그인을 찾고 있나요? <a href="https://openrgb.org/plugins.html">OpenRGB.org</a>의 공식 목록을 참고하세요.</body></html> - + Install OpenRGB Plugin OpenRGB 플러그인 설치 - + Plugin files (*.dll *.dylib *.so *.so.*) 플러그인 파일 (*.dll *.dylib *.so *.so.*) - + Replace Plugin 플러그인 교체 - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? 같은 파일 이름의 플러그인이 이미 설치됐습니다. 정말로 이 플러그인을 교체 하시겠습니까? - + Are you sure you want to remove this plugin? 정말로 이 플러그인을 제거하시겠습니까? - + Restart Needed 재시작 필요 - + The plugin will be fully removed after restarting OpenRGB. 플러그인은 OpenRGB를 다시 시작한 후에 완전히 제거됩니다. @@ -1674,14 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - 프로파일 이름 - - - Save to an existing profile: - 이미 있는 프로파일에 저장: - Profile Selection @@ -1698,36 +1276,6 @@ 새로운 프로파일 만들기: - - OpenRGBQMKORGBSettingsEntry - - Name: - 이름: - - - USB PID: - USB PID: - - - USB VID: - USB VID: - - - - OpenRGBQMKORGBSettingsPage - - Add - 추가 - - - Remove - 제거 - - - Save - 저장 - - OpenRGBSegmentExportDialog @@ -1756,44 +1304,6 @@ 기기 이름 (선택 사항): - - OpenRGBSerialSettingsEntry - - Baud: - Baud: - - - Name: - 이름: - - - Number of LEDs: - LED 개수: - - - Port: - 포트: - - - Protocol: - 프로토콜: - - - - OpenRGBSerialSettingsPage - - Add - 추가 - - - Remove - 제거 - - - Save - 저장 - - OpenRGBServerInfoPage @@ -1913,14 +1423,6 @@ Website: 웹사이트: - - <a href="https://openrgb.org">https://openrgb.org</a> - <a href="https://openrgb.org">https://openrgb.org</a> - - - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - SDK Version: @@ -2027,10 +1529,6 @@ Address: 주소: - - Read Device - 장치 읽기 - SMBus Dumper: @@ -2083,10 +1581,6 @@ Dump Device 장치 덤프 - - SMBus Reader: - SMBus Reader: - Addr: @@ -2103,58 +1597,8 @@ 크기: - - OpenRGBYeelightSettingsEntry - - IP: - IP 주소: - - - ? - ? - - - Music Mode: - 음악 모드: - - - Override host IP: - 호스트 IP 덮어쓰기: - - - Left blank for auto discovering host ip - 비워두면 자동으로 호스트 IP 감지 - - - Choose an IP... - IP 선택... - - - Choose the correct IP for the host - 호스트에 알맞는 IP 선택 - - - - OpenRGBYeelightSettingsPage - - Add - 추가 - - - Remove - 제거 - - - Save - 저장 - - OpenRGBZoneEditorDialog - - Resize Zone - 구역 크기 조절 - Add Segment @@ -2264,14 +1708,6 @@ Ignore 무시 - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>하나 이상의 크기 조정 가능 구역이 구성되지 않았습니다. 크기 조정 가능 구역은 연결된 장치의 크기를 자동으로 감지할 수 없는 ADDRESSABLE RGB 헤더에 보통 사용됩니다. </p><p>각 구역의 LED 개수를 입력하세요</p><p>정확한 크기를 계산하는 방법에 대해 더 많은 정보를 얻고 싶다면 <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">다음 링크를</span></a> 확인하세요.</p></body></html> - - - Resize the zones - 구역 재설정 - Controller @@ -2448,7 +1884,7 @@ 포트: - + No serial ports found 직렬 포트를 찾을 수 없습니다 @@ -2456,345 +1892,285 @@ Settings - + Load Window Geometry 윈도우 지오메트리 불러오기 - 90000 - 90000 - - - + Run Zone Checks on Rescan 다시 스캔할 때 구역 검사 진행 - Start Server - 서버 시작 - - - + Start Minimized 최소화 상태로 시작 - User Interface Settings: - UI 설정: - - - + Start at Login 로그인 시에 시작 - + Minimize on Close 종료되지 않고 최소화 - + Numerical Labels 수치 라벨 - + Display numerical labels for otherwise non-labeled LEDs in the LED view LED 보기에서 라벨이 없는 LED에 수치 라벨을 표시합니다 - + Window Geometry 창 기하학 - + Save on Exit 닫을 때 지오메트리 저장 - Start Client - 클라이언트 시작 - - - Load Profile - 프로파일 불러오기 - - - Set Server Port - 서버 포트 설정 - - - + HID Safe Mode HID 안전 모드 - + Use an alternate method for detecting HID devices HID 장치를 감지하는 대체 방법 사용 - + Initial Detection Delay (ms) 초기 감지 지연 (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started 기기 감지 시작 시 기다릴 시간(밀리초) - + Detection 감지 - + Enable Log Console 콘솔 로그 활성화 - + Log Level 로그 수준 - + Log File Count Limit 로그 파일 수 제한 - + Maximum number of log files to keep, 0 for no limit 보관할 로그 파일의 최대 수, 0은 제한 없음 - + Log Manager 로그 관리자 - + Serve All Controllers 모든 컨트롤러 제공 - + Include controllers provided by client connections and plugins 클라이언트 연결 및 플러그인에서 제공하는 컨트롤러 포함 - + Default Host 기본 호스트 - + Default Port 기본 포트 - + Legacy Workaround 레거시 대안 - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets 일부 오래된 SDK 구현을 위한 대안으로, 특정 패킷에 대해 잘못된 패킷 크기를 보낸 경우에 사용합니다 - + Server 서버 - + Custom Arguments 사용자 인자 - Log Manager Settings: - 로그 관리자 설정: - - - Start at Login Status - 로그인 상태에서 시작 - - - Start at Login Settings: - 로그인 시에 시작 설정: - - - Open Settings Folder - 설정 폴더 열기 - - - Drivers Settings - 드라이버 설정 - - - + Monochrome Tray Icon 흑백 트레이 아이콘 - + Save window geometry on exit 종료 시 창 기하학적 형태 저장 - + X X - + Y Y - + Width 너비 - + Height 높이 - + User Interface 사용자 인터페이스 - + SMBus Sleep Mode (restart required) SMBus 수면 모드 (재시작 필요) - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus : CPU 사용량 감소 (재시작 필요) - Set Profile on Exit - 종료 시 프로파일 설정 - - - + Shared SMBus Access (restart required) 공유된 SMBus 접근 (재시작 필요) - Set Server Host - 서버 호스트 설정 - - - + Language 언어 (Language) - + Disable Key Expansion 장치 화면에서 키 확장 비활성화 - + Hex Format 16진수 형식 - + Enable Start at Login 로그인 시 시작 활성화 - + Start OpenRGB on login 로그인 시 OpenRGB 시작 - + Start minimized to the system tray 시스템 트레이에 최소화하여 시작 - + Additional command line arguments to pass to OpenRGB when starting on login 로그인 시 OpenRGB를 시작할 때 전달할 추가 명령줄 인수 - + Language for the user interface 사용자 인터페이스 언어 - + Keep OpenRGB active in the system tray when closing the main window 메인 창을 닫을 때 시스템 트레이에서 OpenRGB를 활성화 상태로 유지합니다 - + Use a monochrome icon in the system tray instead of a full color icon 시스템 트레이에 풀 컬러 아이콘 대신 모노크롬 아이콘을 사용합니다 - + Select #BBGGRR or #RRGGBB format for hex display and input #BBGGRR 또는 #RRGGBB 형식을 사용하여 16진수 표시 및 입력을 선택하세요 - + Compact Tabs 컴팩트 탭 - + Display sidebar tabs as icons only 사이드바 탭을 아이콘만으로 표시 - + Tabs on Top 탭 위에 - + Display tabs on top instead of on the left 탭을 왼쪽 대신 상단에 표시 - + Show LED View by Default 기본적으로 LED 뷰 표시 - + Drivers 드라이버 - + Enable Log File 로그 파일 활성화 - - A problem occurred enabling Start at Login. - 로그인 시에 시작을 활성화 하는 도중에 문제가 발생했습니다. - English - US 한국인 - - System Default - 시스템 기본값 - Load Profile on Exit @@ -2827,16 +2203,36 @@ + Load Profile on Service Shutdown + 서비스 종료 시 프로필 로드 + + + + Profile to load when the OpenRGB background service shuts down + OpenRGB 백그라운드 서비스가 종료될 때 로드할 프로필 + + + + Load Profile on Service Startup + 서비스 시작 시 프로필 로드 + + + + Profile to load when the OpenRGB background service starts up + OpenRGB 백그라운드 서비스가 시작될 때 로드할 프로필 + + + Load Profile on Suspend 스스로 정지 시 프로필 로드 - + Profile to load before system enters sleep mode 시스템이 수면 모드에 진입하기 전에 로드할 프로필 - + Profile Manager 프로필 관리자 diff --git a/qt/i18n/OpenRGB_ms_MY.ts b/qt/i18n/OpenRGB_ms_MY.ts index 75d9697a9..d0721d726 100644 --- a/qt/i18n/OpenRGB_ms_MY.ts +++ b/qt/i18n/OpenRGB_ms_MY.ts @@ -92,7 +92,7 @@ Port: - + No serial ports found Tiada port siri ditemui @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Beberapa peranti dalaman mungkin tidak didetect:</h2><p>Satu atau lebih antaramuka I2C atau SMBus gagal untuk diinisialisasi.</p><p><b>Modul DRAM RGB, pencahayaan RGB onboard pada papan induk tertentu, dan Kad Grafik RGB, tidak akan tersedia dalam OpenRGB</b> tanpa I2C atau SMBus.</p><h4>Cara membaikinya:</h4><p>Pada Windows, ini biasanya disebabkan oleh kegagalan untuk memuat pemandu PawnIO.</p><p>Anda mesti memasang <a href='https://pawnio.eu/'>PawnIO</a> terlebih dahulu, kemudian anda mesti membuka OpenRGB sebagai administrator untuk mengakses peranti ini.</p><p>Lihat <a href='https://help.openrgb.org/'>help.openrgb.org</a> untuk langkah-langkah penyelesaian masalah tambahan jika anda terus melihat pesan ini.<br></p><h3>Jika anda tidak menggunakan RGB dalaman pada desktop, pesan ini tidak penting untuk anda.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Beberapa peranti dalaman mungkin tidak didetect:</h2><p>Satu atau lebih antaramuka I2C atau SMBus gagal untuk diinisialisasi.</p><p><b>Modul DRAM RGB, pencahayaan RGB onboard pada papan induk tertentu, dan kad grafik RGB, tidak akan tersedia dalam OpenRGB</b> tanpa I2C atau SMBus.</p><h4>Cara membaikinya:</h4><p>Pada Linux, ini biasanya disebabkan oleh modul i2c-dev yang tidak dimuat.</p><p>Anda mesti memuat modul i2c-dev bersama dengan pemandu i2c yang betul untuk papan induk anda. Ini biasanya i2c-piix4 untuk sistem AMD dan i2c-i801 untuk sistem Intel.</p><p>Lihat <a href='https://help.openrgb.org/'>help.openrgb.org</a> untuk langkah-langkah penyelesaian masalah tambahan jika anda terus melihat pesan ini.<br></p><h3>Jika anda tidak menggunakan RGB dalaman pada desktop, pesan ini tidak penting untuk anda.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>AMARAN:</h2><p>Peraturan udev OpenRGB tidak dipasang.</p><p>Kebanyakan peranti tidak akan tersedia kecuali OpenRGB dijalankan sebagai root.</p><p>Jika menggunakan AppImage, Flatpak, atau versi OpenRGB yang dikompil semula, anda mesti memasang peraturan udev secara manual.</p><p>Lihat <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> untuk memasang peraturan udev secara manual.</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>AMARAN:</h2><p>Lebih daripada satu peraturan udev OpenRGB telah dipasang.</p><p>Fail peraturan udev 60-openrgb.rules dipasang dalam kedua-dua /etc/udev/rules.d dan /usr/lib/udev/rules.d.</p><p>Fail peraturan udev yang berlebihan boleh berkonflik, disarankan untuk memadamkan salah satu daripadanya.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Amaran:</h2><p>Satu atau lebih antaramuka I2C/SMBus gagal untuk diinisialisasikan.</p><p>Berdasarkan antaramuka yang gagal diinisialisasikan, beberapa modul DRAM RGB, pendedahan cahaya RGB papan induk, dan kad grafik RGB mungkin tidak tersedia dalam OpenRGB.</p><p>Pada Windows, ini biasanya disebabkan oleh kegagalan memuat pemandu PawnIO.</p><p>Untuk OpenRGB mengakses peranti ini, anda mesti memasang PawnIO dari <a href='https://pawnio.eu/'>https://pawnio.eu</a> dan menjalankan OpenRGB sebagai pentadbir atau sebagai perkhidmatan sistem.</p><p>Jika anda tidak menggunakan sebarang peranti yang disenaraikan di atas, anda boleh dengan selamat mengabaikan mesej ini.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Amaran:</h2><p>Satu atau lebih antaramuka I2C/SMBus gagal untuk diinisialisasi.</p><p>Berdasarkan antaramuka yang gagal diinisialisasi, beberapa modul DRAM RGB, pendedahan cahaya RGB papan induk dan kad grafik RGB mungkin tidak tersedia dalam OpenRGB.</p><p>Pada Linux, ini biasanya disebabkan oleh modul i2c-dev yang tidak dimuat.</p><p>Untuk OpenRGB mengakses peranti ini, anda mesti memuatkan modul i2c-dev bersama dengan modul pemandu I2C yang betul untuk papan induk anda. Ini biasanya i2c-piix4 untuk sistem AMD dan i2c-i801 untuk sistem Intel.</p><p>Jika anda tidak menggunakan sebarang peranti yang disenaraikan di atas, anda boleh dengan selamat mengabaikan mesej ini.</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Amaran:</h2><p>Peraturan udev OpenRGB tidak dipasang.</p><p>Kebanyakan peranti tidak akan tersedia kecuali OpenRGB dijalankan sebagai root.</p><p>Jika menggunakan versi AppImage, Flatpak, atau versi yang dikompil semula OpenRGB, anda mesti memasang peraturan udev secara manual.</p><p>Lihat <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> untuk memasang peraturan udev secara manual.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Amaran:</h2><p>Peraturan udev OpenRGB tidak dipasang.</p><p>Kebanyakan peranti tidak akan tersedia kecuali OpenRGB dijalankan sebagai perkhidmatan sistem atau sebagai root.</p><p>Jika menggunakan versi AppImage, Flatpak, atau versi yang dikompil semula OpenRGB, anda mesti memasang peraturan udev secara manual.</p><p>Lihat <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> untuk memasang peraturan udev secara manual.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Amaran:</h2><p>Lebih daripada satu peraturan udev OpenRGB telah dipasang.</p><p>Fail peraturan udev 60-openrgb.rules dipasang dalam kedua-dua /etc/udev/rules.d dan /usr/lib/udev/rules.d.</p><p>Fail peraturan udev yang berlebihan boleh berkonflik, disarankan untuk memadamkan salah satu daripadanya.</p> @@ -363,7 +347,7 @@ QMK (Protokol VialRGB) - + Serial Device Peranti Siri @@ -499,44 +483,19 @@ Simpan Sambungan - + Rescan Devices Imbasan Semula Peranti - + Disconnect Putuskan sambungan - - - OpenRGBDMXSettingsEntry - Name: - Nama: - - - Keepalive Time: - Keepalive Time: - - - Port: - Port: - - - - OpenRGBDMXSettingsPage - - Add - Tambah - - - Remove - Alih keluar - - - Save - Simpan + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB berada dalam mod klien tempatan. Koneksi tempatan mungkin tidak boleh diputuskan. @@ -548,44 +507,64 @@ + Device Configuration + Konfigurasi Peranti + + + + Device Name: + Nama Peranti: + + + Device-Specific Configuration Konfigurasi Khusus Peranti + + + Reset Device Configuration + Tetapkan Semula Konfigurasi Peranti + OpenRGBDeviceInfoPage - + Serial: Siri: - + Name: Nama: - + Vendor: Penjual: - + Type: Jenis: - - Description: - Penerangan: + + Display Name: + - + + Description: + Nama Paparan: + + + Version: Versi: - + Location: Lokasi: @@ -629,12 +608,12 @@ - + Save To Device Simpan Ke Peranti - + Edit Zone Sunting Zon @@ -651,7 +630,7 @@ Mode: - Mod: + Sunting @@ -696,7 +675,7 @@ Edit - + @@ -719,113 +698,133 @@ Hex: - + Set individual LEDs to static colors. Safe for use with software-driven effects. Tetapkan LED individu kepada warna statik. Selamat untuk digunakan dengan kesan dipacu perisian. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Tetapkan LED individu kepada warna statik. Tidak selamat untuk digunakan dengan kesan dipacu perisian. - + Sets the entire device or a zone to a single color. Menetapkan keseluruhan peranti atau zon kepada satu warna. - + Gradually fades between fully off and fully on. Secara beransur-ansur pudar antara mati sepenuhnya dan hidup sepenuhnya. - + Abruptly changes between fully off and fully on. Berubah secara mendadak antara mati sepenuhnya dan hidup sepenuhnya. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Secara beransur-ansur kitaran melalui keseluruhan spektrum warna. Semua lampu pada peranti adalah warna yang sama. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Secara beransur-ansur kitaran melalui keseluruhan spektrum warna. Menghasilkan corak pelangi yang bergerak. - + Flashes lights when keys or buttons are pressed. Berkelip lampu apabila butang ditekan. - - + + Entire Device Keseluruhan Peranti - + Edit Device - + Edit Peranti - + Entire Zone Keseluruhan Zon - + Left Kiri - + Right Kanan - + Up Atas - + Down Bawah - + Horizontal Mendatar - + Vertical Menegak - + + Up-Left + Kiri-Atas + + + + Up-Right + Kanan-Atas + + + + Down-Left + Kiri-Bawah + + + + Down-Right + Kanan-Bawah + + + Saved To Device Disimpan Ke Peranti - + Saving Not Supported Simpanan Tidak Disokong - + All Zones Semua Zon - + Mode Specific Mod Khusus - + Entire Segment Segmen Seluruh @@ -864,7 +863,8 @@ - + + Rescan Devices Imbasan Semula Peranti @@ -877,14 +877,10 @@ - + Delete Profile Padam Profil - - Load Profile - Muat Profil - OpenRGB is detecting devices... @@ -906,156 +902,124 @@ Simpan Profil dengan nama tersuai - + + Show/Hide Tunjukkan/Sembunyikan - + + Profiles Profil - + + Quick Colors Warna Pantas - + + Red Merah - + + Yellow Kuning - + + Green Hijau - + + Cyan Sian - + + Blue Biru - + + Magenta Magenta - + + White Putih - + + Lights Off Lampu padam - + + Exit Keluar - + Plugins Plugin - + About OpenRGB Mengenai OpenRGB - + Manually Added Devices Peranti yang Ditambahkan Secara Manual - Software - Perisian - - - + Supported Devices Peranti yang Disokong - + General Settings Seting Umum - E1.31 Devices - Peranti E1.31 - - - LIFX Devices - Peranti LIFX - - - Philips Hue Devices - Peranti Philips Hue - - - Philips Wiz Devices - Peranti Philips Wiz - - - OpenRGB QMK Protocol - Protokol QMK OpenRGB - - - Serial Devices - Peranti Bersiri - - - Yeelight Devices - Peranti Yeelight - - - Nanoleaf Devices - Peranti Nanoleaf - - - Elgato KeyLight Devices - Peranti Elgato KeyLight - - - Elgato LightStrip Devices - Peranti Elgato LightStrip - - - + SMBus Tools Alat SMBus - + SDK Client Klient SDK - + SDK Server Pelayan SDK - + Do you really want to delete this profile? Adakah anda benar-benar mahu memadamkan profil ini? - + Log Console Konsol Log @@ -1073,182 +1037,6 @@ Lalai Sistem - - OpenRGBE131SettingsEntry - - Start Channel: - Saluran Mulakan: - - - Number of LEDs: - Bilangan LED: - - - Start Universe: - Mulakan Universe: - - - Name: - Nama: - - - Matrix Order: - Susunan Matriks: - - - Matrix Height: - Ketinggian Matriks: - - - Matrix Width: - Kelebaran Matriks: - - - Type: - Jenis: - - - IP (Unicast): - IP (Unicast): - - - Universe Size: - Saiz Universe: - - - Keepalive Time: - Keepalive Time: - - - RGB Order: - Perintah RGB: - - - Single - Satu - - - Linear - Linear - - - Matrix - Matriks - - - Horizontal Top Left - Mendatar Kiri Atas - - - Horizontal Top Right - Mendatar Atas Kanan - - - Horizontal Bottom Left - Mendatar Bawah Kiri - - - Horizontal Bottom Right - Mendatar Bawah Kanan - - - Vertical Top Left - Menegak Atas Kiri - - - Vertical Top Right - Menegak Atas Kanan - - - Vertical Bottom Left - Menegak Bawah Kiri - - - Vertical Bottom Right - Menegak Bawah Kanan - - - - OpenRGBE131SettingsPage - - Add - Tambah - - - Remove - Alih keluar - - - Save - Simpan - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Tambah - - - Remove - Alih keluar - - - Save - Simpan - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Tambah - - - Remove - Alih keluar - - - Save - Simpan - - - - OpenRGBGoveeSettingsEntry - - IP: - IP: - - - - OpenRGBGoveeSettingsPage - - Add - Tambah - - - Remove - Alih keluar - - - Save - Simpan - - OpenRGBHardwareIDsDialog @@ -1277,58 +1065,6 @@ Pembekal - - OpenRGBKasaSmartSettingsEntry - - IP: - IP: - - - Name - Nama - - - - OpenRGBKasaSmartSettingsPage - - Add - Tambah - - - Remove - Alih keluar - - - Save - Simpan - - - - OpenRGBLIFXSettingsEntry - - IP: - IP: - - - Name - Nama - - - - OpenRGBLIFXSettingsPage - - Add - Tambah - - - Remove - Alih keluar - - - Save - Simpan - - OpenRGBLogConsolePage @@ -1365,127 +1101,6 @@ Lebar: - - OpenRGBNanoleafNewDeviceDialog - - Port: - Port: - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP: - - - Port: - Port: - - - Auth Key: - Kunci Auth: - - - Unpair - Nyahgandingkan - - - Pair - Gandingkan - - - - OpenRGBNanoleafSettingsPage - - Scan - Scan - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - Untuk berpasangan, tahan butang hidup-mati ke bawah selama 5-7 saat sehingga LED mula berkelip dalam corak, kemudian klik butang "Gandingkan" dalam masa 30 saat. - - - Add - Tambah - - - Remove - Alih keluar - - - - OpenRGBPhilipsHueSettingsEntry - - Entertainment Mode: - Mod Hiburan: - - - Auto Connect Group: - Kumpulan Sambung Auto: - - - IP: - IP: - - - Client Key: - Kunci Klient: - - - Username: - Nama Pengguna: - - - MAC: - MAC: - - - Unpair Bridge - Nyahgandingkan Bridge - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Alih keluar - - - Add - Tambah - - - Save - Simpan - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Selepas menambah entri Hue dan menyimpan, restart semula OpenRGB dan tekan butang Sync pada Hue Bridge anda untuk memasangkannya. - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP: - - - - OpenRGBPhilipsWizSettingsPage - - Add - Tambah - - - Remove - Alih keluar - - - Save - Simpan - - OpenRGBPluginsEntry @@ -1528,10 +1143,6 @@ API Version: Versi API: - - API Version Value - Nilai Versi API - OpenRGBPluginsPage @@ -1542,7 +1153,7 @@ - + Remove Plugin Alih Keluar Plugin @@ -1552,37 +1163,37 @@ <html><head/><body>Sedang mencari plugin? Lihat senarai rasmi di <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Pasang OpenRGB Plugin - + Plugin files (*.dll *.dylib *.so *.so.*) Fail Plugin (*.dll *.dylib *.so *.so.*) - + Replace Plugin Gantikan Plugin - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Plugin dengan nama fail ini telah dipasang. Adakah anda pasti mahu menggantikan plugin ini? - + Are you sure you want to remove this plugin? Adakah anda pasti mahu mengalih keluar plugin ini? - + Restart Needed Diperlukan Semula - + The plugin will be fully removed after restarting OpenRGB. Plugin akan sepenuhnya dikeluarkan selepas memulakan semula OpenRGB. @@ -1649,10 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - Nama profil - Profile Selection @@ -1669,36 +1276,6 @@ Cipta profil baru: - - OpenRGBQMKORGBSettingsEntry - - Name: - Nama: - - - USB PID: - USB PID: - - - USB VID: - USB VID: - - - - OpenRGBQMKORGBSettingsPage - - Add - Tambah - - - Remove - Alih keluar - - - Save - Simpan - - OpenRGBSegmentExportDialog @@ -1727,44 +1304,6 @@ Nama Peranti (Pilihan): - - OpenRGBSerialSettingsEntry - - Baud: - Baud: - - - Name: - Nama: - - - Number of LEDs: - Bilangan LED: - - - Port: - Port: - - - Protocol: - Protokol: - - - - OpenRGBSerialSettingsPage - - Add - Tambah - - - Remove - Alih keluar - - - Save - Simpan - - OpenRGBServerInfoPage @@ -1869,19 +1408,11 @@ GitLab: Halaman GitLab: - - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - Website: Laman Web: - - <a href="https://openrgb.org">https://openrgb.org</a> - <a href="https://openrgb.org">https://openrgb.org</a> - SDK Version: @@ -1998,10 +1529,6 @@ Address: Alamat: - - Read Device - Baca Peranti - SMBus Dumper: @@ -2054,10 +1581,6 @@ Dump Device Buang Peranti - - SMBus Reader: - Pembaca SMBus: - Addr: @@ -2074,58 +1597,8 @@ Saiz: - - OpenRGBYeelightSettingsEntry - - IP: - IP: - - - ? - ? - - - Music Mode: - Mod Muzik: - - - Override host IP: - Gantikan IP hos: - - - Left blank for auto discovering host ip - Dibiar kosong untuk auto temui IP hos - - - Choose an IP... - Pilih IP... - - - Choose the correct IP for the host - Pilih IP yang betul untuk hos - - - - OpenRGBYeelightSettingsPage - - Add - Tambah - - - Remove - Alih keluar - - - Save - Simpan - - OpenRGBZoneEditorDialog - - Resize Zone - Ubah saiz Zon - Add Segment @@ -2235,10 +1708,6 @@ Ignore Abaikan - - Resize the zones - Ubah saiz zon - Controller @@ -2415,7 +1884,7 @@ Port: - + No serial ports found Tiada port siri yang ditemui @@ -2423,329 +1892,277 @@ Settings - Open Settings Folder - Buka Folder Seting - - - Log Manager Settings: - Seting Pengurus Log: - - - User Interface Settings: - Seting Antara Muka Pengguna: - - - + HID Safe Mode Modus Selamat HID - + Use an alternate method for detecting HID devices Gunakan kaedah alternatif untuk mengesan peranti HID - + Initial Detection Delay (ms) Keterlambatan Pemindai Awal (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started Kuantiti masa, dalam millisecond, untuk menunggu sebelum mengesan peranti apabila dimulakan - + Detection Pengesanan - + Enable Log Console Dayakan Log Konsol - + Log Level Aras Log - + Log File Count Limit Had Kiraan Fail Log - + Maximum number of log files to keep, 0 for no limit Kuantiti maksimum fail log yang perlu disimpan, 0 untuk tiada had - + Log Manager Pengurus Log - + Serve All Controllers Sahajakan Semua Pemacu - + Include controllers provided by client connections and plugins Termasuk penganal yang dibekalkan oleh koneksi klien dan plugin - + Default Host Hospital Lalai - + Default Port Port Lalai - + Legacy Workaround Kaedah Atas Talian Klasik - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Pengiraan sementara untuk beberapa pelaksanaan SDK yang lebih tua yang menghantar saiz paket yang tidak betul untuk beberapa paket tertentu - + Server Pelayan - Start Server - Mulakan Pelayan - - - + Start at Login Mulakan Pada Log Masuk - Start at Login Settings: - Seting Mulakan Pada Log Masuk: - - - Drivers Settings - Seting Pemacu - - - + Save on Exit Simpan Geometri Pada Tutup - Start Client - Mulakan Klient - - - Load Profile - Muat Profil - - - + Monochrome Tray Icon Ikon Dulang Skala Kelabu - Start at Login Status - Mulakan pada Status Log Masuk - - - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: Kurangkan Penggunaan CPU (Restart diperlukan) - + Start Minimized Diminimumkan pada Permulaan - + Enable Start at Login Aktifkan Mulakan pada Log Masuk - + Start OpenRGB on login Mulakan OpenRGB semasa log masuk - + Start minimized to the system tray Mula diminikan ke tray sistem - + Additional command line arguments to pass to OpenRGB when starting on login Argumen tambahan baris arahan untuk diberikan kepada OpenRGB apabila dimulakan semasa log masuk - + Language for the user interface Bahasa untuk antaramuka pengguna - + Keep OpenRGB active in the system tray when closing the main window Kekalkan OpenRGB aktif dalam tray sistem apabila menutup tetingkap utama - + Use a monochrome icon in the system tray instead of a full color icon Gunakan ikon monokrom dalam tray sistem sebaliknya daripada ikon penuh warna - + Select #BBGGRR or #RRGGBB format for hex display and input Pilih format #BBGGRR atau #RRGGBB untuk paparan dan input heksa - + Compact Tabs Tab Kompak - + Display sidebar tabs as icons only Tunjukkan tab sidebar sebagai ikon sahaja - + Tabs on Top Tab di Atas - + Display tabs on top instead of on the left Papar tab pada bahagian atas sebaliknya pada bahagian kiri - + Numerical Labels Label Nombor - + Display numerical labels for otherwise non-labeled LEDs in the LED view Papar label nombor untuk LED yang tidak berlabel dalam paparan LED - + Window Geometry Geometri Tetingkap - + Load Window Geometry Geometri Tetingkap Muatan - + User Interface antaramuka pengguna - + SMBus Sleep Mode (restart required) Modus Tidur SMBus (diperlukan semula memulakan) - + Drivers Pemandu - 90000 - 90000 - - - Set Profile on Exit - Tetapkan Profil semasa Keluar - - - + Custom Arguments Argumen Tersuai - + Minimize on Close Minimumkan Pada Tutup - + Save window geometry on exit Simpan geometri tetingkap semasa keluar - + X X - + Y Y - + Width Kedalaman - + Height Ketinggian - + Shared SMBus Access (restart required) Akses SMBus Dikongsi (Restart diperlukan) - Set Server Host - Tetapkan Hos Pelayan - - - Set Server Port - Tetapkan Port Pelayan - - - + Run Zone Checks on Rescan Jalankan pemeriksaan zon pada pengimbasan semula - + Language Bahasa - + Disable Key Expansion Keluarkan Kembangan Kunci - + Hex Format Format Heksadecimal - + Show LED View by Default Tunjukkan Pandangan LED sebagai Lalai - + Enable Log File Aktifkan Fail Log @@ -2754,14 +2171,6 @@ English - US Melayu - - System Default - Lalai Sistem - - - A problem occurred enabling Start at Login. - Masalah telah berlaku mendayakan Mula Pada Log Masuk. - Load Profile on Exit @@ -2794,16 +2203,36 @@ + Load Profile on Service Shutdown + Muat turun profil pada penutupan perkhidmatan + + + + Profile to load when the OpenRGB background service shuts down + Profil yang akan dimuatkan apabila perkhidmatan latar belakang OpenRGB ditutup + + + + Load Profile on Service Startup + Muat turun profil pada mula perkhidmatan + + + + Profile to load when the OpenRGB background service starts up + Profil yang akan dimuatkan apabila perkhidmatan latar belakang OpenRGB dimulakan + + + Load Profile on Suspend Muat turun Profil pada Tunda - + Profile to load before system enters sleep mode Profil untuk dimuatkan sebelum sistem memasuki mod tidur - + Profile Manager Pengurus Profil diff --git a/qt/i18n/OpenRGB_nb_NO.ts b/qt/i18n/OpenRGB_nb_NO.ts index f9389532c..11814e22a 100644 --- a/qt/i18n/OpenRGB_nb_NO.ts +++ b/qt/i18n/OpenRGB_nb_NO.ts @@ -92,7 +92,7 @@ Port: - + No serial ports found Ingen serielle porter funnet @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Noen interne enheter kan ikke oppdages:</h2><p>Én eller flere I2C- eller SMBus-interfaces har ikke klart å initialisere seg.</p><p><b>RGB DRAM-moduler, noen motherebords interne RGB-lys og RGB-grafikkort vil ikke være tilgjengelige i OpenRGB</b> uten I2C eller SMBus.</p><h4>Hvordan du løser dette:</h4><p>På Windows er dette vanligvis forårsaket av en feil ved lasting av PawnIO-drevet.</p><p>Du må først installere <a href='https://pawnio.eu/'>PawnIO</a>, deretter må du kjøre OpenRGB som administrator for å få tilgang til disse enhetene.</p><p>Se <a href='https://help.openrgb.org/'>help.openrgb.org</a> for ekstra feilsøkingssteg hvis du fortsatt ser denne meldingen.<br></p><h3>Hvis du ikke bruker interne RGB på en datamaskin, er denne meldingen ikke viktig for deg.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Noen interne enheter blir muligens ikke oppdaget:</h2><p>Ett eller flere I2C eller SMBus grensesnitt kunne ikke initialiseres.</p><p><b>RGB DRAM moduler, noen hovedkorts' interne RGB lys, og RGB grafikkkort vil ikke være tilgjengelig i OpenRGB</b> uten I2C eller SMBus.</p><h4>Hvordan fikse dette:</h4><p>På Linux er dette vanligvis fordi i2c-dev modulen ikke er lastet.</p><p>Du må laste i2c-dev modulen sammen med riktig i2c driver for hovedkortet. Dette er vanligvis i2c-piix4 for AMD systemer og i2c-i801 for Intel systemer.</p><p>Se <a href='https://help.openrgb.org/'>help.openrgb.org</a> for flere feilsøkingstrinn hvis du fortsatt ser denne meldingen.<br></p><h3>Hvis du ikke bruker internt RGB er ikke denne meldingen viktig for deg.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>WARNING:</h2><p>OpenRGB udev reglene er ikke installert.</p><p>De fleste enhetene vil ikke være tilgjengelige med mindre du kjører OpenRGB som root.</p><p>Hvis du bruker AppImage, Flatpak eller egenkompilerte versjoner av OpenRGB, må du installere udev reglene manuelt</p><p>Se <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> for å installere udev reglene manuelt</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ADVARSEL:</h2><p>Flere OpenRGB udev regler er installert.</p><p>Udev regelfilen 60-openrgb.rules er installert i både /etc/udev/rules.d og /usr/lib/udev/rules.d.</p><p>Flere udev-regelfiler kan komme i konflikt, det anbefales å fjerne en av dem.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Advarsel:</h2><p>Én eller flere I2C/SMBus-flater feilet under oppstart.</p><p>Avhengig av hvilke flater som feilet under oppstart, kan visse RGB DRAM-moduler, visse RGB-belysning på hovedkort og RGB-grafikkort ikke være tilgjengelige i OpenRGB.</p><p>På Windows er dette vanligvis forårsaket av en feil ved lasting av PawnIO-drevet.</p><p>For at OpenRGB skal kunne få tilgang til disse enhetene, må du installere PawnIO fra <a href='https://pawnio.eu/'>https://pawnio.eu</a> og kjøre OpenRGB som administrator eller som systemtjeneste.</p><p>Hvis du ikke bruker noen av enhetene som er nevnt ovenfor, kan du trygt ignorere denne meldingen.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Advarsel:</h2><p>Én eller flere I2C/SMBus-interfaces har ikke klart å initialisere.</p><p>Avhengig av hvilke grensesnitt som ikke klarte å initialisere, kan noen RGB DRAM-moduler, noen RGB-belysning på hovedkortet og RGB-grafikkort være utilgjengelige i OpenRGB.</p><p>På Linux er dette vanligvis fordi modulen i2c-dev ikke er lastet.</p><p>For at OpenRGB skal kunne tilgå disse enhetene, må du laste modulen i2c-dev sammen med den riktige I2C-drevmodulen for hovedkortet ditt. Dette er vanligvis i2c-piix4 for AMD-systemer og i2c-i801 for Intel-systemer.</p><p>Hvis du ikke bruker noen av enhetene som er nevnt ovenfor, kan du trygt ignorere denne meldingen.</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Advarsel:</h2><p>OpenRGBs udev-regler er ikke installert.</p><p>De fleste enheter vil ikke være tilgjengelige med mindre du kjører OpenRGB som rot.</p><p>Hvis du bruker AppImage, Flatpak eller selvbygde versjoner av OpenRGB, må du installere udev-reglene manuelt.</p><p>Se <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> for å installere udev-reglene manuelt.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Advarsel:</h2><p>OpenRGBs udev-regler er ikke installert.</p><p>De fleste enheter vil ikke være tilgjengelige med mindre du kjører OpenRGB som systemtjeneste eller som rotbruker.</p><p>Hvis du bruker AppImage, Flatpak eller selvbygde versjoner av OpenRGB, må du installere udev-reglene manuelt.</p><p>Se <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> for å installere udev-reglene manuelt.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Advarsel:</h2><p>Flere OpenRGB udev-regler er installert.</p><p>udev-reglerfilen 60-openrgb.rules er installert både i /etc/udev/rules.d og /usr/lib/udev/rules.d.</p><p>Flere udev-reglerfiler kan kollidere, det anbefales derfor å fjerne én av dem.</p> @@ -363,7 +347,7 @@ QMK (VialRGB-protokoll) - + Serial Device Seriell enhet @@ -499,60 +483,19 @@ Lagre tilkobling - + Rescan Devices Skann enheter på nytt - + Disconnect Koble fra - - - OpenRGBDMXSettingsEntry - Name: - Navn: - - - Port: - Port: - - - Red Channel: - Rød kanal: - - - Green Channel: - Grønn kanal: - - - Blue Channel: - Blå kanal: - - - Brightness Channel: - Lystyrkekanal: - - - Keepalive Time: - Keepalive Time: - - - - OpenRGBDMXSettingsPage - - Add - Legg til - - - Remove - Fjern - - - Save - Lagre + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB er i lokal klientmodus. Den lokale forbindelsen kan ikke bli koblet fra. @@ -564,44 +507,64 @@ + Device Configuration + Enhetskonfigurasjon + + + + Device Name: + Enhetsnavn: + + + Device-Specific Configuration Enhetspesifikk konfigurasjon + + + Reset Device Configuration + Nullstill enhetskonfigurasjon + OpenRGBDeviceInfoPage - + Name: Navn: - + Vendor: Produsent: - + Type: Type: - + + Display Name: + Visningsnavn: + + + Description: Beskrivelse: - + Version: Versjon: - + Location: Sted: - + Serial: Serienummer: @@ -704,7 +667,7 @@ V: - + Edit Zone Rediger zone @@ -725,7 +688,7 @@ - + Save To Device Lagre til enheten @@ -735,113 +698,133 @@ Hex: - + Set individual LEDs to static colors. Safe for use with software-driven effects. Sett individuelle LEDer til statiske farger. Trygt for bruk med programvaredrevne effekter. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Sett individuelle LEDer til statiske farger. Ikke trygt for bruk med programvaredrevne effekter. - + Sets the entire device or a zone to a single color. Setter hele enheten eller en sone til en enkelt farge. - + Gradually fades between fully off and fully on. Tones gradvis mellom helt av og helt på. - + Abruptly changes between fully off and fully on. Skifter brått mellom helt av og helt på. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Går gradvis gjennom hele fargespekteret. Alle lysene på enheten er samme farge. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Går gradvis gjennom hele fargespekteret. Gir et regnbuemønster som beveger seg. - + Flashes lights when keys or buttons are pressed. Blinker lyser når taster eller knapper trykkes. - - + + Entire Device Hele enheten - + Edit Device - + Rediger enhet - + Entire Zone Hele sonen - + Left Venstre - + Right Høyre - + Up Opp - + Down Ned - + Horizontal Horisontal - + Vertical Vertikal - + + Up-Left + Opp-venstre + + + + Up-Right + Opp-høyre + + + + Down-Left + Ned-venstre + + + + Down-Right + Ned-til høyre + + + Saved To Device Lagret til enhet - + Saving Not Supported Lagring ikke støttet - + All Zones Alle soner - + Mode Specific Modus spesifikk - + Entire Segment Hele segmentet @@ -880,7 +863,8 @@ - + + Rescan Devices Skann enheter på nytt @@ -893,14 +877,10 @@ - + Delete Profile Slett profil - - Load Profile - Bruk profil - OpenRGB is detecting devices... @@ -922,167 +902,127 @@ Lagre profil med navn - + + Show/Hide Vis/skjul - + + Profiles Profiler - + + Quick Colors Raske farger - + + Red Rød - + + Yellow Gul - + + Green Grønn - + + Cyan Cyan - + + Blue Blå - + + Magenta Magenta - + + White Hvit - + + Lights Off Lys av - + + Exit Lukk - + Plugins Plugins - + About OpenRGB Om OpenRGB - + Manually Added Devices Manuelt tillegg av enheter - Software - Software - - - + Supported Devices Støttede enheter - + General Settings Generelle innstillinger - DMX Devices - DMX enheter - - - E1.31 Devices - E1.31 enheter - - - Kasa Smart Devices - Kasa Smart enheter - - - Philips Hue Devices - Philips Hue enheter - - - Philips Wiz Devices - Philips Wiz enheter - - - OpenRGB QMK Protocol - OpenRGB QMK Protokoll - - - Serial Devices - Serielle enheter - - - Yeelight Devices - Yeelight enheter - - - + SMBus Tools SMBus verktøy - + SDK Client SDK klient - + SDK Server SDK server - + Do you really want to delete this profile? Vil du virkelig slette denne profilen? - + Log Console Loggkonsoll - - LIFX Devices - LIFX enheter - - - Nanoleaf Devices - Nanoleaf enheter - - - Elgato KeyLight Devices - Elgato KeyLight enheter - - - Elgato LightStrip Devices - Elgato LightStrip enheter - OpenRGBDynamicSettingsWidget @@ -1097,178 +1037,6 @@ System standard - - OpenRGBE131SettingsEntry - - Start Channel: - Startkanal: - - - Number of LEDs: - Antall av LEDer: - - - Start Universe: - Start univers: - - - Name: - Navn: - - - Matrix Order: - Matrix rekkefølge: - - - Matrix Height: - Matrix høyde: - - - Matrix Width: - Matrix bredde: - - - Type: - Type: - - - IP (Unicast): - IP (Unicast): - - - Universe Size: - Univers størrelse: - - - Keepalive Time: - Keepalive Time: - - - RGB Order: - RGB rekkefølge: - - - Single - Enkel - - - Linear - Lineær - - - Matrix - Matrix - - - Horizontal Top Left - Horisontal opp venstre - - - Horizontal Top Right - Horisontal opp høyre - - - Horizontal Bottom Left - Horisontal ned venstre - - - Horizontal Bottom Right - Horisontal ned høyre - - - Vertical Top Left - Vertikal opp venstre - - - Vertical Top Right - Vertikal opp høyre - - - Vertical Bottom Left - Vertikal ned venstre - - - Vertical Bottom Right - Vertikal ned høyre - - - - OpenRGBE131SettingsPage - - Add - Legg til - - - Remove - Fjern - - - Save - Lagre - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Legg til - - - Remove - Fjern - - - Save - Lagre - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Legg til - - - Remove - Fjern - - - Save - Lagre - - - - OpenRGBGoveeSettingsEntry - - IP: - IP: - - - - OpenRGBGoveeSettingsPage - - Remove - Fjern - - - Save - Lagre - - OpenRGBHardwareIDsDialog @@ -1297,58 +1065,6 @@ Hardware IDer - - OpenRGBKasaSmartSettingsEntry - - IP: - IP: - - - Name - Navn - - - - OpenRGBKasaSmartSettingsPage - - Add - Legg Til - - - Remove - Fjern - - - Save - Lagre - - - - OpenRGBLIFXSettingsEntry - - IP: - IP: - - - Name - Navn - - - - OpenRGBLIFXSettingsPage - - Add - Legg til - - - Remove - Fjern - - - Save - Lagre - - OpenRGBLogConsolePage @@ -1385,155 +1101,6 @@ Bredde: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - Ny Nanoleaf enhet - - - IP address: - IP adresse: - - - Port: - Port: - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP: - - - Port: - Port: - - - Auth Key: - Auth Key: - - - Unpair - Koble fra - - - Pair - Koble til - - - - OpenRGBNanoleafSettingsPage - - Add - Legg til - - - Remove - Fjern - - - Scan - Skann - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - For å pare, hold på-av-knappen nede i 5-7 sekunder til LED-lampen begynner å blinke i et mønster, og klikk deretter på "Koble til" knappen innen 30 sekunder. - - - - OpenRGBPhilipsHueSettingsEntry - - IP: - IP: - - - Entertainment Mode: - Kinomodus: - - - Username: - Brukernavn: - - - Client Key: - Klient nøkkel: - - - Unpair Bridge - Koble fra bridge - - - MAC: - MAC: - - - Auto Connect Group: - Auto connect gruppe: - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Fjern - - - Add - Legg til - - - Save - Lagre - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Etter å ha lagt til en Hue-oppføring og lagret, start OpenRGB på nytt og trykk på Sync-knappen på Hue-broen for å pare den. - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP: - - - Use Cool White - Bruk kalthvit - - - Use Warm White - Bruk varmhvit - - - White Strategy: - Hvit strategi: - - - Average - Gjennomsnitt - - - Minimum - Minimum - - - - OpenRGBPhilipsWizSettingsPage - - Add - Legg til - - - Remove - Fjern - - - Save - Lagre - - OpenRGBPluginsEntry @@ -1576,10 +1143,6 @@ API Version: API Versjon: - - API Version Value - API Versjon verdi - OpenRGBPluginsPage @@ -1590,7 +1153,7 @@ - + Remove Plugin Fjern plugin @@ -1600,37 +1163,37 @@ <html><head/><body>Ser etter plugins? Finn den offisielle listen her <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Installer OpenRGB plugin - + Plugin files (*.dll *.dylib *.so *.so.*) Plugin filer (*.dll *.dylib *.so *.so.*) - + Replace Plugin Erstatt plugin - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Et plugin med dette filnavnet er allerede installert. Er du sikker på at du vil erstatte dette pluginet? - + Are you sure you want to remove this plugin? Vil du virkelig fjerne dette pluginet? - + Restart Needed Omstart kreves - + The plugin will be fully removed after restarting OpenRGB. Pluginet vil bli fullstendig fjernet etter omstart av OpenRGB. @@ -1697,10 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - Profilnavn - Profile Selection @@ -1716,40 +1275,6 @@ Create a new profile: Opprett ny profil: - - Save to an existing profile: - Lagre til eksisterende profil: - - - - OpenRGBQMKORGBSettingsEntry - - Name: - Navn: - - - USB PID: - USB PID: - - - USB VID: - USB VID: - - - - OpenRGBQMKORGBSettingsPage - - Add - Legg til - - - Remove - Fjern - - - Save - Lagre - OpenRGBSegmentExportDialog @@ -1779,44 +1304,6 @@ Enhetsnavn (valgfritt): - - OpenRGBSerialSettingsEntry - - Baud: - Baud: - - - Name: - Navn: - - - Number of LEDs: - Antall av LEDer: - - - Port: - Port: - - - Protocol: - Protokoll: - - - - OpenRGBSerialSettingsPage - - Add - Legg til - - - Remove - Fjern - - - Save - Lagre - - OpenRGBServerInfoPage @@ -1936,14 +1423,6 @@ Website: Nettside: - - <a href="https://openrgb.org">https://openrgb.org</a> - <a href="https://openrgb.org">https://openrgb.org</a> - - - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - SDK Version: @@ -2050,10 +1529,6 @@ Address: Adresse: - - Read Device - Les enhet - SMBus Dumper: @@ -2106,10 +1581,6 @@ Dump Device Dump enheter - - SMBus Reader: - SMBus leser: - Addr: @@ -2126,58 +1597,8 @@ Størrelse: - - OpenRGBYeelightSettingsEntry - - IP: - IP: - - - ? - ? - - - Music Mode: - Musikkmodus: - - - Override host IP: - Override host IP: - - - Left blank for auto discovering host ip - Las tomt for automatisk oppdagelse av host IPen - - - Choose an IP... - Velg en IP... - - - Choose the correct IP for the host - Velg riktig IP for hosten - - - - OpenRGBYeelightSettingsPage - - Add - Legg til - - - Remove - Fjern - - - Save - Lagre - - OpenRGBZoneEditorDialog - - Resize Zone - Endre størrelse på sone - Add Segment @@ -2287,18 +1708,6 @@ Ignore Ignorer - - Zones Resizer - Sone resizer - - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>En eller flere soner som kan endre størrelse er ikke konfigurert. Soner som kan endres er oftest brukt for adresserbare RGB headere der størrelsen på den tilkoblede enheten ikke kan oppdages automatisk.</p><p>Vennligst oppgi antall LEDer i hver sone nedenfor.</p><p>For mer informasjon om beregning av riktig størrelse, vennligst sjekk <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - - - Resize the zones - Endre sonestørrelse - Controller @@ -2442,25 +1851,6 @@ USB VID: - - ResourceManager - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the WinRing0 driver.</p><p>You must run OpenRGB as administrator at least once to allow WinRing0 to set up.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Noen interne enheter blir muligens ikke oppdaget:</h2><p>Ett eller flere I2C eller SMBus grensesnitt kunne ikke initialiseres.</p><p><b>RGB DRAM moduler, noen hovedkorts' interne RGB lys, og RGB grafikkkort vil ikke være tilgjengelig i OpenRGB</b> uten I2C eller SMBus.</p><h4>Hvordan fikse dette:</h4><p>På Windows er dette vanligvis forårsaket av en feil med å laste WinRing0 driveren.</p><p>Du må kjøre OpenRGB som administrator minst én gang for å tillate at WinRing0 konfigureres.</p><p>Se <a href='https://help.openrgb.org/'>help.openrgb.org</a> for flere feilsøkingstrinn hvis du fortsatt ser denne meldingen.<br></p><h3>Hvis du ikke bruker internt RGB er ikke denne meldingen viktig for deg.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Noen interne enheter blir muligens ikke oppdaget:</h2><p>Ett eller flere I2C eller SMBus grensesnitt kunne ikke initialiseres.</p><p><b>RGB DRAM moduler, noen hovedkorts' interne RGB lys, og RGB grafikkkort vil ikke være tilgjengelig i OpenRGB</b> uten I2C eller SMBus.</p><h4>Hvordan fikse dette:</h4><p>På Linux er dette vanligvis fordi i2c-dev modulen ikke er lastet.</p><p>Du må laste i2c-dev modulen sammen med riktig i2c driver for hovedkortet. Dette er vanligvis i2c-piix4 for AMD systemer og i2c-i801 for Intel systemer.</p><p>Se <a href='https://help.openrgb.org/'>help.openrgb.org</a> for flere feilsøkingstrinn hvis du fortsatt ser denne meldingen.<br></p><h3>Hvis du ikke bruker internt RGB er ikke denne meldingen viktig for deg.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>WARNING:</h2><p>OpenRGB udev reglene er ikke installert.</p><p>De fleste enhetene vil ikke være tilgjengelige med mindre du kjører OpenRGB som root.</p><p>Hvis du bruker AppImage, Flatpak eller egenkompilerte versjoner av OpenRGB, må du installere udev reglene manuelt</p><p>Se <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> for å installere udev reglene manuelt</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ADVARSEL:</h2><p>Flere OpenRGB udev regler er installert.</p><p>Udev regelfilen 60-openrgb.rules er installert i både /etc/udev/rules.d og /usr/lib/udev/rules.d.</p><p>Flere udev-regelfiler kan komme i konflikt, det anbefales å fjerne en av dem.</p> - - SerialSettingsEntry @@ -2494,7 +1884,7 @@ Port: - + No serial ports found Ingen serielle porter funnet @@ -2502,353 +1892,285 @@ Settings - + Load Window Geometry Bruk vindugeometri - 90000 - 90000 - - - + Run Zone Checks on Rescan Kjør sonekontroll ved skanning - + Disable Key Expansion Deaktiver nøkkelutvidelse i enhetsvisning - Start Server - Start server - - - + Show LED View by Default Vis LED visning som standard - Set Profile on Suspend - Sett profil ved hvilemodus - - - + Enable Start at Login Aktiver start ved pålogging - + Start OpenRGB on login Start OpenRGB ved pålogging - + Start Minimized Start minimert - + Start minimized to the system tray Start minimeret til systemtrayen - + Additional command line arguments to pass to OpenRGB when starting on login Ekstra kommandolinjeargumenter som skal sendes til OpenRGB når programmet starter ved innlogging - + Language for the user interface Språk for brukergrensesnittet - + Keep OpenRGB active in the system tray when closing the main window Hold OpenRGB aktiv i systemtrayen når hovedvinduet lukkes - + Monochrome Tray Icon Grått icon - User Interface Settings: - Innstillinger for brukergrensesnitt: - - - Set Profile on Resume - Sett profil ved våkning - - - + Start at Login Start ved pålogging - Set Profile on Exit - Sett profil ved lukking - - - + HID Safe Mode HID trygge modus - + Use an alternate method for detecting HID devices Bruk en alternativ metode for å oppdage HID-enheter - + Initial Detection Delay (ms) Innledende oppdagelsesforsinkelse (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started Antall millisekunder som skal vente før enheter oppdages når programmet startes - + Detection Deteksjon - + Enable Log File Aktiver loggfil - + Log Level Loggnivå - + Log File Count Limit Antall loggfiler grense - + Maximum number of log files to keep, 0 for no limit Maksimal antall loggfiler som skal beholdes, 0 for ubegrenset - + Log Manager Loggadministrator - + Serve All Controllers Kjør alle kontrollere - + Include controllers provided by client connections and plugins Inkluder kontrollere fra klientsambindelser og tillegg - + Default Host Standardvært - + Default Port Standardport - + Legacy Workaround Tilbakeholdelse for eldre systemer - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Workaround for noen eldre SDK-tilfeller som sendte feil pakkestørrelse for visse pakker - + Server Server - + Minimize on Close Minimer ved lukking - + Use a monochrome icon in the system tray instead of a full color icon Bruk en monokrom ikon i systemlåsen istedenfor et fargelagt ikon - + Select #BBGGRR or #RRGGBB format for hex display and input Velg #BBGGRR- eller #RRGGBB-format for heksadesimalvisning og -inndata - + Compact Tabs Kompakte faneinnhold - + Display sidebar tabs as icons only Vis sidefeltfane som bare ikoner - + Tabs on Top Fanebånd på toppen - + Display tabs on top instead of on the left Vis faneinnholdet øverst istedenfor på venstre side - + Numerical Labels Numeriske etiketter - + Display numerical labels for otherwise non-labeled LEDs in the LED view Vis numeriske etiketter for LED-er som ellers ikke har etiketter i LED-visningen - + Window Geometry Vindu geometri - + Save on Exit Lagre geometri ved lukking - + Save window geometry on exit Lagre vinduets geometri ved avslutt - + X X - + Y Y - + Width Bredde - + Height Høyde - + User Interface Bruker grensesnitt - + SMBus Sleep Mode (restart required) SMBus-søvnmodus (omstart kreves) - + Drivers Journaler - Start Client - Start klient - - - Load Profile - Bruk profil - - - Set Server Port - Sett server port - - - + Enable Log Console Aktiver loggkonsoll - Drivers Settings - Driverinnstillinger - - - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: reduser CPU bruk (omstart kreves) - + Custom Arguments Eigene Argumente - Log Manager Settings: - Loggbehandlingsinnstillinger: - - - Start at Login Status - Start ved pålogging status - - - Start at Login Settings: - Startinnstillinger - - - Open Settings Folder - Åpne innstillingsmappen - - - + Shared SMBus Access (restart required) Delt SMBus tilgang (omstart kreves) - Set Server Host - Sett server host - - - + Language Språk - + Hex Format Hex format - - A problem occurred enabling Start at Login. - Det oppstod et problem ved aktivering av Start ved pålogging. - English - US Norsk - - System Default - System standard - Load Profile on Exit @@ -2881,16 +2203,36 @@ + Load Profile on Service Shutdown + Last ned profil ved tjenestestopp + + + + Profile to load when the OpenRGB background service shuts down + Profil som skal lastes når OpenRGB bakgrunns-tjenesten slutter + + + + Load Profile on Service Startup + Last ned profil ved tjenestestart + + + + Profile to load when the OpenRGB background service starts up + Profil som skal lastes når OpenRGB-tjenesten starter + + + Load Profile on Suspend Last ned profil ved å sette på pause - + Profile to load before system enters sleep mode Profil som skal lastes inn før systemet går i søvnmodus - + Profile Manager Profilhåndterer diff --git a/qt/i18n/OpenRGB_pl_PL.ts b/qt/i18n/OpenRGB_pl_PL.ts index c3d00ad0b..0f9b14799 100644 --- a/qt/i18n/OpenRGB_pl_PL.ts +++ b/qt/i18n/OpenRGB_pl_PL.ts @@ -92,7 +92,7 @@ Port: - + No serial ports found Nie znaleziono portów szeregowych @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Wewnętrzne urządzenia mogą nie zostać wykryte:</h2><p>Jedno lub więcej interfejsów I2C lub SMBus nie udało się zainicjalizować.</p><p><b>Moduły RGB DRAM, pewne diody RGB na płycie głównej oraz karty graficzne RGB nie będą dostępne w OpenRGB</b> bez I2C lub SMBus.</p><h4>Jak to naprawić:</h4><p>Na Windows, to zazwyczaj spowodowane jest niepowodzeniem załadowania sterownika PawnIO.</p><p>Najpierw musisz zainstalować <a href='https://pawnio.eu/'>PawnIO</a>, a następnie musisz uruchomić OpenRGB jako administrator, aby uzyskać dostęp do tych urządzeń.</p><p>Zobacz <a href='https://help.openrgb.org/'>help.openrgb.org</a> dla dodatkowych kroków rozwiązywania problemów, jeśli nadal widzisz tę wiadomość.<br></p><h3>Jeśli nie korzystasz z wewnętrznych diod RGB na biurkowym komputerze, ta wiadomość nie jest dla Ciebie istotna.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2> Niektóre wewnętrzne urządzenia mogą nie zostać wykryte:</h2><p> Jedno lub więcej interfejsów I2C lub SMBus nie udało się zainicjalizować.</p><p><b>Moduły RGB DRAM, pewne diody RGB na płycie głównej oraz karty graficzne RGB nie będą dostępne w OpenRGB</b> bez I2C lub SMBus.</p><h4>Jak to naprawić:</h4><p>Na Linuxie to zazwyczaj wynika z tego, że moduł i2c-dev nie jest załadowany.</p><p>Musisz załadować moduł i2c-dev wraz z odpowiednim sterownikiem I2C dla Twojej płyty głównej. Zazwyczaj jest to i2c-piix4 dla systemów AMD i i2c-i801 dla systemów Intel.</p><p>Zobacz <a href='https://help.openrgb.org/'>help.openrgb.org</a>, aby uzyskać dodatkowe kroki rozwiązywania problemów, jeśli nadal widzisz tę wiadomość.<br></p><h3>Jeśli nie korzystasz z wewnętrznych diod RGB na biurkowym komputerze, ta wiadomość nie jest dla Ciebie istotna.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>OSTRZEŻENIE:</h2><p>Reguły udev dla OpenRGB nie są zainstalowane.</p><p>Większość urządzeń nie będzie dostępna, chyba że uruchomisz OpenRGB jako root.</p><p>Jeśli korzystasz z wersji AppImage, Flatpak lub samodzielnie skompilowanej wersji OpenRGB, musisz ręcznie zainstalować reguły udev.</p><p>Aby ręcznie zainstalować reguły udev, zobacz <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a></p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>OSTRZEŻENIE:</h2><p>Zainstalowano wiele reguł udev dla OpenRGB.</p><p>Plik reguł udev 60-openrgb.rules jest zainstalowany zarówno w /etc/udev/rules.d, jak i w /usr/lib/udev/rules.d.</p><p>Wiele plików reguł udev może powodować konflikty, zaleca się usunięcie jednego z nich.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Ostrzeżenie:</h2><p>Jedno lub więcej interfejsów I2C/SMBus nie udało się zainicjalizować.</p><p>Zależnie od tego, które interfejsy nie zostały zainicjalizowane, niektóre moduły RGB DRAM, niektóre diody RGB na płycie głównej i karty graficzne RGB mogą nie być dostępne w OpenRGB.</p><p>Na Windows, to zazwyczaj spowodowane jest niepowodzeniem załadowania sterownika PawnIO.</p><p>Aby OpenRGB mógł uzyskać dostęp do tych urządzeń, musisz zainstalować PawnIO z <a href='https://pawnio.eu/'>https://pawnio.eu</a> i uruchomić OpenRGB jako administrator lub jako usługę systemową.</p><p>Jeśli nie korzystasz z żadnych z wymienionych powyżej urządzeń, możesz bezpiecznie zignorować to wiadomość.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Ostrzeżenie:</h2><p>Jedno lub więcej interfejsów I2C/SMBus nie udało się zainicjalizować.</p><p>Zależnie od tego, które interfejsy nie zostały zainicjalizowane, niektóre moduły RGB DRAM, niektóre diody RGB na płycie głównej oraz karty graficzne RGB mogą nie być dostępne w OpenRGB.</p><p>Na systemach Linux to zazwyczaj wynika z tego, że moduł i2c-dev nie jest załadowany.</p><p>Aby OpenRGB mógł uzyskać dostęp do tych urządzeń, musisz załadować moduł i2c-dev wraz z odpowiednim modułem sterownika I2C dla Twojej płyty głównej. Zazwyczaj jest to i2c-piix4 dla systemów AMD i i2c-i801 dla systemów Intel.</p><p>Jeśli nie korzystasz z żadnych z wymienionych powyżej urządzeń, możesz bezpiecznie zignorować to wiadomość. - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Ostrzeżenie:</h2><p>Reguły udev dla OpenRGB nie są zainstalowane.</p><p>Większość urządzeń nie będzie dostępna, chyba że uruchomisz OpenRGB jako root.</p><p>Jeśli korzystasz z wersji AppImage, Flatpak lub samodzielnie skompilowanej wersji OpenRGB, musisz ręcznie zainstalować reguły udev.</p><p>Aby ręcznie zainstalować reguły udev, zobacz <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a></p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Ostrzeżenie:</h2><p>Reguły udev dla OpenRGB nie są zainstalowane.</p><p>Większość urządzeń nie będzie dostępna, chyba że uruchomisz OpenRGB jako usługę systemową lub jako root.</p><p>Jeśli korzystasz z wersji AppImage, Flatpak lub samodzielnie skompilowanej wersji OpenRGB, musisz ręcznie zainstalować reguły udev.</p><p>Aby ręcznie zainstalować reguły udev, zobacz <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a></p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Ostrzeżenie:</h2><p>Zainstalowane są wiele reguł udev dla OpenRGB.</p><p>Plik reguł udev 60-openrgb.rules jest zainstalowany zarówno w /etc/udev/rules.d, jak i w /usr/lib/udev/rules.d.</p><p>Wiele plików reguł udev może powodować konflikty, zaleca się usunięcie jednego z nich.</p> @@ -363,7 +347,7 @@ QMK (protokół VialRGB) - + Serial Device Urządzenie szeregowe @@ -499,44 +483,19 @@ Zapisz połączenie - + Rescan Devices Przeskanuj urządzenia - + Disconnect Rozłącz - - - OpenRGBDMXSettingsEntry - Name: - Nazwa: - - - Keepalive Time: - Czas keepalive: - - - Port: - Port: - - - - OpenRGBDMXSettingsPage - - Add - Dodaj - - - Remove - Usuń - - - Save - Zapisz + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB działa w trybie lokalnego klienta. Połączenie lokalne może nie zostać rozłączone. @@ -548,44 +507,64 @@ + Device Configuration + Konfiguracja urządzenia + + + + Device Name: + Nazwa urządzenia: + + + Device-Specific Configuration Konfiguracja specyficzna dla urządzenia + + + Reset Device Configuration + Zresetuj konfigurację urządzenia + OpenRGBDeviceInfoPage - + Name: Nazwa: - + Vendor: Producent: - + Type: Typ: - + + Display Name: + Nazwa wyświetlanego urządzenia: + + + Description: Opis: - + Version: Wersja: - + Location: Lokacja: - + Serial: Numer seryjny: @@ -660,12 +639,12 @@ Edit - + Zone: - Strefa: + Edytuj @@ -688,7 +667,7 @@ V: - + Edit Zone Edytuj strefę @@ -709,7 +688,7 @@ - + Save To Device Zapisz w urządzeniu @@ -719,113 +698,133 @@ Hex: - + Set individual LEDs to static colors. Safe for use with software-driven effects. Ustawia statyczny kolor w poszczególnych LEDach. Bezpieczne w użyciu wraz z zaprogramowanymi efektami. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Ustawia statyczny kolor w poszczególnych LEDach. Nie jest bezpieczne w użyciu wraz z zaprogramowanymi efektami. - + Sets the entire device or a zone to a single color. Ustawia całe urządzenie lub strefę w jednakowym kolorze. - + Gradually fades between fully off and fully on. Stopniowo przechodzi pomiędzy w pełni włączonym i wyłączonym. - + Abruptly changes between fully off and fully on. Gwałtownie przechodzi pomiędzy w pełni włączonym i wyłączonym. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Stopniowo przechodzi przez całe spektrum kolorów. Wszytkie światła w urządzeniu są tego samego koloru. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Stopniowo przechodzi przez całe spektrum kolorów. Wytwarza kolory tęczy które się poruszają. - + Flashes lights when keys or buttons are pressed. Błyska światłem gdy klawisze lub guziki są wciskane/ - - + + Entire Device Całe urządzenie - + Edit Device - + Edytuj urządzenie - + Entire Zone Cała strefa - + Left Lewo - + Right Prawo - + Up Góra - + Down Dół - + Horizontal Poziomo - + Vertical Pionowo - + + Up-Left + Góra-Lewo + + + + Up-Right + W górę-Prawo + + + + Down-Left + W dół-lewo + + + + Down-Right + Dół-Prawo + + + Saved To Device Zapisany w urządzeniu - + Saving Not Supported Zapis niewspierany - + All Zones Wszystkie strefy - + Mode Specific Dedykowane w trybie - + Entire Segment Cały segment @@ -864,7 +863,8 @@ - + + Rescan Devices Przeskanuj urządzenia @@ -877,14 +877,10 @@ - + Delete Profile Usuń profil - - Load Profile - Wczytaj profil - OpenRGB is detecting devices... @@ -906,159 +902,127 @@ Zapisz profil z własną nazwą - + + Show/Hide Pokaż/Ukryj - + + Profiles Profile - + + Quick Colors Szybkie kolory - + + Red Czerwony - + + Yellow Żółty - + + Green Zielony - + + Cyan Niebieskozielony - + + Blue Niebieski - + + Magenta Fuksyna - + + White Biały - + + Lights Off Wyłącz światła - + + Exit Wyjście - + Plugins Wtyczki - + About OpenRGB O OpenRGB - + General Settings Ustawienia główne - + Manually Added Devices Urządzenia ręcznie dodane - E1.31 Devices - Urządzenia E1.31 - - - Philips Hue Devices - Urządzenia Philips Hue - - - Philips Wiz Devices - Urządzenia Philips Wiz - - - OpenRGB QMK Protocol - Protokół OpenRGB QMK - - - Serial Devices - Port szeregowy - - - Yeelight Devices - Urządzenia Yeelight - - - + SMBus Tools Narzędzia SMBus - + SDK Client Klient SDK - + SDK Server Serwer SDK - + Do you really want to delete this profile? Czy jesteś pewien że chcesz usunąć ten profil? - + Log Console Konsola logów - LIFX Devices - Urządzenia LIFX - - - Nanoleaf Devices - Urządzenia Nanoleaf - - - Elgato KeyLight Devices - Urządzenia Elgato KeyLight - - - Elgato LightStrip Devices - Urządzenia Elgato LightStrip - - - + Supported Devices Wspierane urządzenia - - Software - Oprogramowanie - OpenRGBDynamicSettingsWidget @@ -1073,182 +1037,6 @@ Domyślne systemowe - - OpenRGBE131SettingsEntry - - Start Channel: - Kanał początkowy: - - - Number of LEDs: - Ilość LEDów: - - - Start Universe: - Początek Universe: - - - Name: - Nazwa: - - - Matrix Order: - Kolejność w matrycy: - - - Matrix Height: - Wysokość matrycy: - - - Matrix Width: - Szerokośc matrycy: - - - Type: - Typ: - - - IP (Unicast): - IP (Unicast): - - - Universe Size: - Rozmiar Universe: - - - Keepalive Time: - Czas keepalive: - - - RGB Order: - Kolejność RGB: - - - Single - Pojedynczy - - - Linear - Liniowy - - - Matrix - Macierz - - - Horizontal Top Left - Pozioma lwea góra - - - Horizontal Top Right - Poziomy prawa góra - - - Horizontal Bottom Left - Poziomy lewy dół - - - Horizontal Bottom Right - Poziomy prawy dół - - - Vertical Top Left - Pionowa lewa góra - - - Vertical Top Right - Pionowa prawa góra - - - Vertical Bottom Left - Pionowy lewy dół - - - Vertical Bottom Right - Pionowy prawy dół - - - - OpenRGBE131SettingsPage - - Add - Dodaj - - - Remove - Usuń - - - Save - Zapisz - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Dodaj - - - Remove - Usuń - - - Save - Zapisz - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Dodaj - - - Remove - Usuń - - - Save - Zapisz - - - - OpenRGBGoveeSettingsEntry - - IP: - IP: - - - - OpenRGBGoveeSettingsPage - - Add - Dodaj - - - Remove - Usuń - - - Save - Zapisz - - OpenRGBHardwareIDsDialog @@ -1277,58 +1065,6 @@ Producent - - OpenRGBKasaSmartSettingsEntry - - IP: - IP: - - - Name - Nazwa - - - - OpenRGBKasaSmartSettingsPage - - Add - Dodaj - - - Remove - Usuń - - - Save - Zapisz - - - - OpenRGBLIFXSettingsEntry - - IP: - IP: - - - Name - Nazwa - - - - OpenRGBLIFXSettingsPage - - Add - Dodaj - - - Remove - Usuń - - - Save - Zapisz - - OpenRGBLogConsolePage @@ -1365,127 +1101,6 @@ Szerokość: - - OpenRGBNanoleafNewDeviceDialog - - Port: - Port: - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP: - - - Port: - Port: - - - Auth Key: - Klucz auth: - - - Unpair - Rozparuj - - - Pair - Sparuj - - - - OpenRGBNanoleafSettingsPage - - Scan - Skanuj - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - W celu sparowania, nacisnij przycisk on-off przez 5-7 sekund dopóki dioda LED zacznie mrugać, wówczas naciśnij przycisk "Pair" w ciągu 30 sekund. - - - Add - Dodaj - - - Remove - Usuń - - - - OpenRGBPhilipsHueSettingsEntry - - IP: - IP: - - - Entertainment Mode: - Tryb rozrywki - - - Username: - Użytkownik: - - - Client Key: - Klucz klienta: - - - Unpair Bridge - Rozparuj mostek - - - MAC: - MAC: - - - Auto Connect Group: - Automatyczne połączenie grupy: - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Usuń - - - Add - Dodaj - - - Save - Zapisz - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Po dodaniu wpisu Hue i zapisaniu zrestartuj OpenRGB i wciśnij przycisk Sync na mostku Hue w celu sparowania. - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP: - - - - OpenRGBPhilipsWizSettingsPage - - Add - Dodaj - - - Remove - Usuń - - - Save - Zapisz - - OpenRGBPluginsEntry @@ -1528,10 +1143,6 @@ API Version: Wersja API: - - API Version Value - Wersja API - OpenRGBPluginsPage @@ -1542,7 +1153,7 @@ - + Remove Plugin Usuń wtyczkę @@ -1552,37 +1163,37 @@ <html><head/><body>Szukasz wtyczek? Zobacz oficjalną listę na <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Zainstaluj wtyczkę OpenRGB - + Plugin files (*.dll *.dylib *.so *.so.*) Pliki wtyczek (*.dll *.dylib *.so *.so.*) - + Replace Plugin Podmień Wtyczkę - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Wtyczka o tej nazwi jest juź zainstalowana. Czy na pewno chcesz ją zastąpić? - + Are you sure you want to remove this plugin? Czy na pewno chcesz usunąć tę wtyczkę? - + Restart Needed Wymagany restart - + The plugin will be fully removed after restarting OpenRGB. Wtyczka zostanie całkowicie usunięta po ponownym uruchomieniu OpenRGB. @@ -1649,10 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - Nazwa profilu - Profile Selection @@ -1669,36 +1276,6 @@ Utwórz nowy profil: - - OpenRGBQMKORGBSettingsEntry - - Name: - Nazwa: - - - USB PID: - USB PID: - - - USB VID: - USB VID: - - - - OpenRGBQMKORGBSettingsPage - - Add - Dodaj - - - Remove - Usuń - - - Save - Zapisz - - OpenRGBSegmentExportDialog @@ -1727,44 +1304,6 @@ Nazwa urządzenia (opcjonalnie): - - OpenRGBSerialSettingsEntry - - Baud: - Baud: - - - Name: - Nazwa: - - - Number of LEDs: - Ilość LEDów - - - Port: - Port: - - - Protocol: - Protokół - - - - OpenRGBSerialSettingsPage - - Add - Dodaj - - - Remove - Usuń - - - Save - Zapisz - - OpenRGBServerInfoPage @@ -1990,10 +1529,6 @@ Address: Adres: - - Read Device - Odczytaj z urządzenia - SMBus Dumper: @@ -2046,10 +1581,6 @@ Dump Device Zrzut urzadzenia - - SMBus Reader: - Czytnik SMBus: - Addr: @@ -2066,58 +1597,8 @@ Rozmiar: - - OpenRGBYeelightSettingsEntry - - IP: - IP: - - - ? - ? - - - Music Mode: - Tryb muzyki: - - - Override host IP: - Nadpisz IP hosta: - - - Left blank for auto discovering host ip - Pozostaw puste by automatycznie wykjryć ip hosta - - - Choose an IP... - Wybierz IP... - - - Choose the correct IP for the host - Wybierz poprawne IP dla hosta - - - - OpenRGBYeelightSettingsPage - - Add - Dodaj - - - Remove - Usuń - - - Save - Zapisz - - OpenRGBZoneEditorDialog - - Resize Zone - Zmien rozmiar strefy - Add Segment @@ -2227,10 +1708,6 @@ Ignore Zignoruj - - Resize the zones - Rozmiar stref - Controller @@ -2407,7 +1884,7 @@ Port: - + No serial ports found Nie znaleziono portów szeregowych @@ -2415,332 +1892,280 @@ Settings - + Load Window Geometry Wczytaj pozycję okna - + Run Zone Checks on Rescan Uruchom sprawdzanie stref skanowania - Start Server - Uruchom serwer - - - + Start Minimized Uruchom zminimalizowany - User Interface Settings: - Ustawienia interfejsu użytkownika - - - + Start at Login Start podczas logowania - + Minimize on Close Zminimalizuj przy wyjściu - + Numerical Labels Etykiety liczbowe - + Display numerical labels for otherwise non-labeled LEDs in the LED view Wyświetl etykiety numeryczne dla diod LED, które w przeciwnym razie nie mają etykiet, w widoku diod LED - + Window Geometry Geometria okna - + Save on Exit Zapisz pozycję przy wyjściu - Start Client - Wystartu klienta - - - Load Profile - Załaduj profil - - - Set Server Port - Ustaw port serwera - - - + HID Safe Mode Tryb bezpieczny HID - + Use an alternate method for detecting HID devices Użyj alternatywnego sposobu wykrywania urządzeń HID - + Initial Detection Delay (ms) Opóźnienie wykrywania początkowego (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started Czas oczekiwania w milisekundach przed wykrywaniem urządzeń po uruchomieniu - + Detection Wykrywanie - + Enable Log Console Włączenie Konsoli LOGów - + Log Level Poziom logowania - + Log File Count Limit Liczba plików dziennika - + Maximum number of log files to keep, 0 for no limit Maksymalna liczba plików dziennika do zachowania, 0 oznacza brak limitu - + Log Manager Menedżer dzienników - + Serve All Controllers Służyć wszystkim kontrolerom - + Include controllers provided by client connections and plugins Uwzględnij kontrolery dostarczane przez połączenia klienta i wtyczki - + Default Host Domyślny Host - + Default Port Domyślny port - + Legacy Workaround Zaawansowane ustawienia - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Obieg roboczy dla niektórych starszych implementacji SDK, które wysyłały niepoprawny rozmiar pakietu dla określonych pakietów - + Server Serwer - + Custom Arguments Własne opcje - Log Manager Settings: - Ustawiena managera LOGów - - - Start at Login Status - Status Startu podczas logowania - - - Start at Login Settings: - Opcje startu podczas logowania - - - Open Settings Folder - Otwórz folder ustawień - - - Drivers Settings - Ustawienia sterowników - - - + Monochrome Tray Icon Szara ikona w tray'u - + Save window geometry on exit Zapisz geometrię okna przy wyjściu - + X X - + Y Y - + Width Szerokość - + Height Wysokość - + User Interface Interfejs użytkownika - + SMBus Sleep Mode (restart required) Tryb uśpienia SMBus (wymagany restart) - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: Zmniejsz zużycie CPU (wymagany restart) - Set Profile on Exit - Ustaw profil przy wyjściu - - - + Shared SMBus Access (restart required) Współdzielony dostęp do SMBus (wymagany restart) - Set Server Host - Ustaw Serwer - - - + Language Język - + Disable Key Expansion Wyłącz rozszerzanie klucza - + Hex Format Format szesnastkowy - + Enable Start at Login Włącz uruchamianie przy logowaniu - + Start OpenRGB on login Uruchom OpenRGB przy logowaniu - + Start minimized to the system tray Uruchom zminimalizowany do paska systemowego - + Additional command line arguments to pass to OpenRGB when starting on login Dodatkowe argumenty wiersza poleceń do przekazania do OpenRGB podczas uruchamiania przy logowaniu - + Language for the user interface Język interfejsu użytkownika - + Keep OpenRGB active in the system tray when closing the main window Utrzymuj OpenRGB aktywny w pasku systemowym po zamknięciu głównego okna - + Use a monochrome icon in the system tray instead of a full color icon Użyj ikony w tonach szarości w pasku systemowym zamiast ikony w pełnym kolorze - + Select #BBGGRR or #RRGGBB format for hex display and input Wybierz format #BBGGRR lub #RRGGBB dla wyświetlania i wprowadzania wartości w systemie szesnastkowym - + Compact Tabs Kompaktyczne zakładek - + Display sidebar tabs as icons only Wyświetl zakładek pasku bocznego tylko jako ikony - + Tabs on Top Karty na wierzchu - + Display tabs on top instead of on the left Wyświetlaj zakładek na górze zamiast na lewo - + Show LED View by Default Pokaż widok LED domyślnie - + Drivers Kierowcy - + Enable Log File Włącz plik dziennika - - A problem occurred enabling Start at Login. - Wystąpił problem z Włączeniem Podczas Logowania. - English - US @@ -2778,16 +2203,36 @@ + Load Profile on Service Shutdown + Wczytaj profil przy wyłączaniu usługi + + + + Profile to load when the OpenRGB background service shuts down + Profil do załadowania, gdy usługa tła OpenRGB zostanie zamknięta + + + + Load Profile on Service Startup + Wczytaj profil przy uruchomieniu usługi + + + + Profile to load when the OpenRGB background service starts up + Profil do załadowania, gdy usługa w tle OpenRGB zostanie uruchomiona + + + Load Profile on Suspend Wczytaj profil przy zawieszeniu - + Profile to load before system enters sleep mode Profil do załadowania przed przejściem systemu w tryb uśpienia - + Profile Manager Menadżer profili diff --git a/qt/i18n/OpenRGB_pt_BR.ts b/qt/i18n/OpenRGB_pt_BR.ts index 92ebae7ce..2c707ee43 100644 --- a/qt/i18n/OpenRGB_pt_BR.ts +++ b/qt/i18n/OpenRGB_pt_BR.ts @@ -92,7 +92,7 @@ Porta: - + No serial ports found Nenhum porta serial encontrada @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Alguns dispositivos internos podem não ser detectados:</h2><p>Um ou mais interfaces I2C ou SMBus falharam ao inicializar.</p><p><b>Módulos RGB DRAM, iluminação RGB integrada em algumas placas-mãe e cartas gráficas RGB não estarão disponíveis no OpenRGB</b> sem I2C ou SMBus.</p><h4>Como resolver isso:</h4><p>No Windows, isso geralmente é causado por uma falha ao carregar o driver PawnIO.</p><p>Você deve primeiro instalar o <a href='https://pawnio.eu/'>PawnIO</a>, depois deve abrir o OpenRGB como administrador para acessar esses dispositivos.</p><p>Veja <a href='https://help.openrgb.org/'>help.openrgb.org</a> para mais etapas de solução de problemas, se você continuar vendo esta mensagem.<br></p><h3>Se você não estiver usando RGB interno em um computador de mesa, esta mensagem não é importante para você.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Alguns dispositivos internos podem não ser detectados:</h2><p>Uma ou mais interfaces I2C ou SMBus falharam ao inicializar.</p><p><b>Módulos de RAM RGB, os de algumas placas-mãe, iluminação RGB integrada, e placas gráficas RGB não estarão disponíveis no OpenRGB</b> sem I2C ou SMBus.</p><h4>Como resolver isto:</h4><p>No Linux, isso normalmente ocorre pois o módulo i2c-dev não está carregado.</p><p>Você deve carregar o módulo i2c-dev junto com o driver correto do i2c para a sua placa-mãe. Estes são normalmente i2c-piix4 para sistemas AMD e i2c-1801 para sistemas Intel.</p><p>Visite <a href='https://help.openrgb.org/'>help.openrgb.org</a> para mais passos de solução do problema, caso você continue vendo esta mensagem.<br></p><h3>Se você não está usando o RGB interno de um computador, essa mensagem não é importante para você.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>ALERTA:</h2><p>As regras udev do OpenRGB não estão instaladas.</p><p>A maioria dos dispositivos não estarão disponíveis a não ser que execute o OpenRGB como root.</p><p>Se você está usando versões AppImage, Flatpak, ou compiladas por você do OpenRGB, você precisa instalar as regras udev manualmente</p><p>Visite <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> para instalar as regras udev manualmente</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ALERTA:</h2><p>Várias regras udev do OpenRGB estão instaladas.</p><p>O arquivo de regras udev 60-openrgb.rules está instalado tanto em /etc/udev/rules.d como em /usr/lib/udev/rules.d.</p><p>Ter vários arquivos de regras udev pode causar conflitos, é recomendado remover um deles.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Aviso:</h2><p>Um ou mais interfaces I2C/SMBus falharam ao inicializar.</p><p>Dependendo de quais interfaces falharam ao inicializar, alguns módulos de DRAM RGB, a iluminação RGB integrada em algumas placas-mãe e cartas gráficas RGB podem não estar disponíveis no OpenRGB.</p><p>No Windows, isso geralmente é causado por uma falha ao carregar o driver PawnIO.</p><p>Para que o OpenRGB acesse esses dispositivos, você deve instalar o PawnIO de <a href='https://pawnio.eu/'>https://pawnio.eu</a> e executar o OpenRGB como administrador ou como um serviço do sistema.</p><p>Se você não estiver usando nenhum dos dispositivos listados acima, pode ignorar esta mensagem com segurança.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Aviso:</h2><p>Um ou mais interfaces I2C/SMBus falharam ao inicializar.</p><p>Dependendo de quais interfaces falharam ao inicializar, alguns módulos de DRAM RGB, a iluminação RGB integrada em algumas placas-mãe e cartas gráficas RGB podem não estar disponíveis no OpenRGB.</p><p>No Linux, isso geralmente ocorre porque o módulo i2c-dev não está carregado.</p><p>Para que o OpenRGB acesse esses dispositivos, você deve carregar o módulo i2c-dev junto com o módulo correto do driver I2C para sua placa-mãe. Isso geralmente é i2c-piix4 para sistemas AMD e i2c-i801 para sistemas Intel.</p><p>Se você não estiver usando nenhum dos dispositivos listados acima, pode ignorar esta mensagem com segurança.</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Aviso:</h2><p>As regras udev do OpenRGB não estão instaladas.</p><p>A maioria dos dispositivos não estará disponível, a menos que o OpenRGB seja executado como root.</p><p>Se estiver usando versões AppImage, Flatpak ou compiladas manualmente do OpenRGB, você deve instalar as regras udev manualmente.</p><p>Veja <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> para instalar as regras udev manualmente.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Aviso:</h2><p>As regras udev do OpenRGB não estão instaladas.</p><p>A maioria dos dispositivos não estará disponível, a menos que o OpenRGB seja executado como um serviço do sistema ou como root.</p><p>Se estiver usando versões AppImage, Flatpak ou compiladas manualmente do OpenRGB, você deve instalar as regras udev manualmente.</p><p>Veja <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> para instalar as regras udev manualmente.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Aviso:</h2><p>Vários arquivos de regras udev do OpenRGB estão instalados.</p><p>O arquivo de regras udev 60-openrgb.rules está instalado tanto em /etc/udev/rules.d quanto em /usr/lib/udev/rules.d.</p><p>Vários arquivos de regras udev podem conflitar, recomenda-se remover um deles.</p> @@ -363,7 +347,7 @@ QMK (Protocolo VialRGB) - + Serial Device Dispositivo Serial @@ -499,60 +483,19 @@ Salvar conexão - + Rescan Devices Buscar dispositivos - + Disconnect Desconectar - - - OpenRGBDMXSettingsEntry - Brightness Channel: - Canal de brilho: - - - Blue Channel: - Canal azul: - - - Name: - Nome: - - - Green Channel: - Canal verde: - - - Red Channel: - Canal vermelho: - - - Keepalive Time: - Tempo de vida máximo: - - - Port: - Porta: - - - - OpenRGBDMXSettingsPage - - Add - Adicionar - - - Remove - Remover - - - Save - Salvar + + OpenRGB is in local client mode. The local connection may not be disconnected. + O OpenRGB está no modo de cliente local. A conexão local pode não ser desconectada. @@ -564,44 +507,64 @@ + Device Configuration + Configuração do Dispositivo + + + + Device Name: + Nome do Dispositivo: + + + Device-Specific Configuration Configuração Específica do Dispositivo + + + Reset Device Configuration + Redefinir Configuração do Dispositivo + OpenRGBDeviceInfoPage - + Name: Nome: - + Vendor: Fabricante: - + Type: Tipo: - + + Display Name: + Nome de Exibição: + + + Description: Descrição: - + Version: Versão: - + Location: Localização: - + Serial: Número de série: @@ -699,7 +662,7 @@ Luminosidade: - + Edit Zone Editar Zona @@ -720,7 +683,7 @@ - + Save To Device Salvar no dispositivo @@ -735,113 +698,133 @@ Editar - + Set individual LEDs to static colors. Safe for use with software-driven effects. Defina LEDs individuais para cores estáticas. Seguro para uso com efeitos controlados por software. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Defina LEDs individuais para cores estáticas. Não é seguro para uso com efeitos controlados por software. - + Sets the entire device or a zone to a single color. Define todo o dispositivo ou uma zona para uma única cor. - + Gradually fades between fully off and fully on. Transiciona gradualmente entre totalmente desligado e totalmente ligado. - + Abruptly changes between fully off and fully on. Muda de forma brusca entre totalmente desligado e totalmente ligado. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Gradualmente percorre todo o espectro de cores. Todas as luzes do dispositivo são da mesma cor. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Gradualmente percorre todo o espectro de cores. Produz um padrão de arco-íris que se move. - + Flashes lights when keys or buttons are pressed. Pisca as luzes quando as teclas ou botões são pressionados. - - + + Entire Device Dispositivo inteiro - + Edit Device - + Editar Dispositivo - + Entire Zone Zona inteira - + Left Esquerda - + Right Direita - + Up Cima - + Down Baixo - + Horizontal Horizontal - + Vertical Vertical - + + Up-Left + Cima-Esquerda + + + + Up-Right + Para Cima-Direita + + + + Down-Left + Esquerda-Baixo + + + + Down-Right + Baixo-Direita + + + Saved To Device Salvo no dispositivo - + Saving Not Supported Não há suporte para salvar - + All Zones Todas as zonas - + Mode Specific Específico ao modo - + Entire Segment Segmento inteiro @@ -880,7 +863,8 @@ - + + Rescan Devices Buscar dispositivos @@ -893,14 +877,10 @@ - + Delete Profile Apagar perfil - - Load Profile - Carregar perfil - OpenRGB is detecting devices... @@ -922,171 +902,127 @@ Salvar perfil com nome personalizado - + + Show/Hide Mostrar/ocultar - + + Profiles Perfis - + + Quick Colors Cores rápidas - + + Red Vermelho - + + Yellow Amarelo - + + Green Verde - + + Cyan Ciano - + + Blue Azul - + + Magenta Magenta - + + White Branco - + + Lights Off Luzes apagadas - + + Exit Sair - + Plugins Plugins - + General Settings Configurações gerais - + Manually Added Devices Dispositivos Adicionados Manualmente - DMX Devices - Dispositivos DMX - - - E1.31 Devices - Dispositivos E1.31 - - - Kasa Smart Devices - Dispositivos Kasa Smart - - - Philips Hue Devices - Dispositivos Philips Hue - - - Philips Wiz Devices - Dispositivos Philips Wiz - - - OpenRGB QMK Protocol - Protocolo OpenRGB QMK - - - Serial Devices - Dispositivos seriais - - - Yeelight Devices - Dispositivos Yeelight - - - + SMBus Tools Ferramentas SMBus - + SDK Client Cliente do SDK - + SDK Server Servidor do SDK - + Do you really want to delete this profile? Você realmente deseja apagar este perfil? - + Log Console Console de registros - LIFX Devices - Dispositivos LIFX - - - Nanoleaf Devices - Dispositivos Nanoleaf - - - Elgato KeyLight Devices - Dispositivos Elgato KeyLight - - - Elgato LightStrip Devices - Dispositivos Elgato LightStrip - - - + Supported Devices Dispositivos suportados - Software - Software - - - + About OpenRGB Sobre o OpenRGB - - Govee Devices - Dispositivos Govee - OpenRGBDynamicSettingsWidget @@ -1101,182 +1037,6 @@ Padrão do sistema - - OpenRGBE131SettingsEntry - - Start Channel: - Canal inicial: - - - Number of LEDs: - Número de LEDs: - - - Start Universe: - Universo inicial: - - - Name: - Nome: - - - Matrix Order: - Ordem da matriz: - - - Matrix Height: - Altura da matriz: - - - Matrix Width: - Largura da matriz: - - - Type: - Tipo: - - - IP (Unicast): - IP (Unicast): - - - Universe Size: - Tamanho do universo: - - - Keepalive Time: - Tempo de vida máximo: - - - RGB Order: - Ordem do RGB: - - - Single - Individual - - - Linear - Linear - - - Matrix - Matriz - - - Horizontal Top Left - Parte superior esquerda horizontal - - - Horizontal Top Right - Parte superior direita horizontal - - - Horizontal Bottom Left - Parte inferior esquerda horizontal - - - Horizontal Bottom Right - Parte inferior direita horizontal - - - Vertical Top Left - Parte superior esquerda vertical - - - Vertical Top Right - Parte superior direita vertical - - - Vertical Bottom Left - Parte inferior esquerda vertical - - - Vertical Bottom Right - Parte inferior direita vertical - - - - OpenRGBE131SettingsPage - - Add - Adicionar - - - Remove - Remover - - - Save - Salvar - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - Endereço de IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Adicionar - - - Remove - Remover - - - Save - Salvar - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - Endereço de IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Adicionar - - - Remove - Remover - - - Save - Salvar - - - - OpenRGBGoveeSettingsEntry - - IP: - Endereço de IP: - - - - OpenRGBGoveeSettingsPage - - Add - Adicionar - - - Remove - Remover - - - Save - Salvar - - OpenRGBHardwareIDsDialog @@ -1305,58 +1065,6 @@ IDs de hardware - - OpenRGBKasaSmartSettingsEntry - - IP: - Endereço de IP: - - - Name - Nome - - - - OpenRGBKasaSmartSettingsPage - - Add - Adicionar - - - Remove - Remover - - - Save - Salvar - - - - OpenRGBLIFXSettingsEntry - - IP: - Endereço de IP: - - - Name - Nome - - - - OpenRGBLIFXSettingsPage - - Add - Adicionar - - - Remove - Remover - - - Save - Salvar - - OpenRGBLogConsolePage @@ -1393,155 +1101,6 @@ Largura: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - Novo dispositivo Nanoleaf - - - IP address: - Endereço de IP: - - - Port: - Porta: - - - - OpenRGBNanoleafSettingsEntry - - IP: - Endereço de IP: - - - Port: - Porta: - - - Auth Key: - Chave de autenticação: - - - Unpair - Desparear - - - Pair - Parear - - - - OpenRGBNanoleafSettingsPage - - Add - Adicionar - - - Remove - Remover - - - Scan - Buscar - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - Para parear, segure o botão liga/desliga por 5 à 7 segundos até que o LED comece a piscar em um padrão, então clique bo botão "Parear" dentro de 30 segundos. - - - - OpenRGBPhilipsHueSettingsEntry - - IP: - Endereço de IP: - - - Entertainment Mode: - Modo de entretenimento: - - - Username: - Nome de usuário: - - - Client Key: - Chave de cliente: - - - Unpair Bridge - Desparear ponte - - - MAC: - MAC: - - - Auto Connect Group: - Grupo de conexão automática: - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Remover - - - Add - Adicionar - - - Save - Salvar - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Após de adicionar e salvar uma entrada do Hue, reinicie o OpenRGB e pressione o botão de sincronização na sua ponte do Hue para emparelhá-los. - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - Endereço de IP: - - - Use Cool White - Usar branco frio - - - Use Warm White - Usar branco quente - - - White Strategy: - Estratégia do branco: - - - Average - Média - - - Minimum - Mínimo - - - - OpenRGBPhilipsWizSettingsPage - - Add - Adicionar - - - Remove - Remover - - - Save - Salvar - - OpenRGBPluginsEntry @@ -1584,10 +1143,6 @@ API Version: Versão da API: - - API Version Value - Valor da versão da API - OpenRGBPluginsPage @@ -1598,7 +1153,7 @@ - + Remove Plugin Remover plugin @@ -1608,37 +1163,37 @@ <html><head/><body>Procurando plugins? Visite a lista oficial em <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Instalar plugin OpenRGB - + Plugin files (*.dll *.dylib *.so *.so.*) Arquivos de plugin (*.dll *.dylib *.so *.so.*) - + Replace Plugin Substituir plugin - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Um plugin com este nome de arquivo já está instalado. Tem certeza de que deseja substituir este plugin? - + Are you sure you want to remove this plugin? Tem certeza de que deseja remover este plugin? - + Restart Needed Reinício necessário - + The plugin will be fully removed after restarting OpenRGB. O plugin será totalmente removido após reiniciar o OpenRGB. @@ -1705,14 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - Nome do perfil - - - Save to an existing profile: - Salvar em um perfil existente: - Profile Selection @@ -1729,36 +1276,6 @@ Criar um novo perfil: - - OpenRGBQMKORGBSettingsEntry - - Name: - Nome: - - - USB PID: - PID USB: - - - USB VID: - VID USB: - - - - OpenRGBQMKORGBSettingsPage - - Add - Adicionar - - - Remove - Remover - - - Save - Salvar - - OpenRGBSegmentExportDialog @@ -1787,44 +1304,6 @@ Nome do Dispositivo (Opcional): - - OpenRGBSerialSettingsEntry - - Baud: - Bauds: - - - Name: - Nome: - - - Number of LEDs: - Número de LEDs: - - - Port: - Porta: - - - Protocol: - Protocolo: - - - - OpenRGBSerialSettingsPage - - Add - Adicionar - - - Remove - Remover - - - Save - Salvar - - OpenRGBServerInfoPage @@ -1944,14 +1423,6 @@ Website: Site: - - <a href="https://openrgb.org">https://openrgb.org</a> - <a href="https://openrgb.org">https://openrgb.org</a> - - - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - SDK Version: @@ -1962,10 +1433,6 @@ Plugin API Version: Versão da API de plugins: - - Qt Version Value - Valor da versão do Qt - Qt Version: @@ -1976,10 +1443,6 @@ OS Version: Versão do SO: - - OS Version Value - Valor da versão do SO - GNU General Public License, version 2 @@ -2066,10 +1529,6 @@ Address: Endereço: - - Read Device - Ler dispositivo - SMBus Dumper: @@ -2122,10 +1581,6 @@ Dump Device Despejar dispositivo - - SMBus Reader: - Leitor de SMBus: - Addr: @@ -2142,58 +1597,8 @@ Tamanho: - - OpenRGBYeelightSettingsEntry - - IP: - Endereço de IP: - - - ? - ? - - - Music Mode: - Modo música: - - - Override host IP: - Sobrescrever IP do host: - - - Left blank for auto discovering host ip - Deixe em branco para detecção automática do IP do host - - - Choose an IP... - Selecione um IP... - - - Choose the correct IP for the host - Selecione o IP correto para o host - - - - OpenRGBYeelightSettingsPage - - Add - Adicionar - - - Remove - Remover - - - Save - Salvar - - OpenRGBZoneEditorDialog - - Resize Zone - Redimensionar zona - Add Segment @@ -2303,18 +1708,6 @@ Ignore Ignorar - - Zones Resizer - Redimensionador de zonas - - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>Uma ou mais zonas redimensionáveis não foram configuradas. Zonas redimensionáveis são usadas comumente para headers RGB endereçáveis aonde o tamanho do dispositivo conectado não pode ser detectado automaticamente.</p><p>Por favor digite abaixo o número de LEDs em cada zona.</p><p>Para mais informações sobre calcular o tamanho correto, por favor visite <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">este link.</span></a></p></body></html> - - - Resize the zones - Redimensione as zonas - Controller @@ -2458,25 +1851,6 @@ VID USB: - - ResourceManager - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the WinRing0 driver.</p><p>You must run OpenRGB as administrator at least once to allow WinRing0 to set up.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Alguns dispositivos internos podem não ser detectados:</h2><p>Uma ou mais interfaces I2C ou SMBus falharam ao inicializar.</p><p><b>Módulos de RAM RGB, os de algumas placas-mãe, iluminação RGB integrada, e placas gráficas RGB não estarão disponíveis no OpenRGB</b> sem I2C ou SMBus.</p><h4>Como resolver isto:</h4><p>No Windows, isso normalmente ocorre por causa de uma falha ao carregar o driver do WinRing0.</p><p>Você deve executar o OpenRGB como administrador pelo menos uma vez para permitir que o WinRing0 seja configurado.</p><p>Visite <a href='https://help.openrgb.org/'>help.openrgb.org</a> para mais passos de solução do problema, caso você continue vendo esta mensagem.<br></p><h3>Se você não está usando o RGB interno de um computador, essa mensagem não é importante para você.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Alguns dispositivos internos podem não ser detectados:</h2><p>Uma ou mais interfaces I2C ou SMBus falharam ao inicializar.</p><p><b>Módulos de RAM RGB, os de algumas placas-mãe, iluminação RGB integrada, e placas gráficas RGB não estarão disponíveis no OpenRGB</b> sem I2C ou SMBus.</p><h4>Como resolver isto:</h4><p>No Linux, isso normalmente ocorre pois o módulo i2c-dev não está carregado.</p><p>Você deve carregar o módulo i2c-dev junto com o driver correto do i2c para a sua placa-mãe. Estes são normalmente i2c-piix4 para sistemas AMD e i2c-1801 para sistemas Intel.</p><p>Visite <a href='https://help.openrgb.org/'>help.openrgb.org</a> para mais passos de solução do problema, caso você continue vendo esta mensagem.<br></p><h3>Se você não está usando o RGB interno de um computador, essa mensagem não é importante para você.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>ALERTA:</h2><p>As regras udev do OpenRGB não estão instaladas.</p><p>A maioria dos dispositivos não estarão disponíveis a não ser que execute o OpenRGB como root.</p><p>Se você está usando versões AppImage, Flatpak, ou compiladas por você do OpenRGB, você precisa instalar as regras udev manualmente</p><p>Visite <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> para instalar as regras udev manualmente</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ALERTA:</h2><p>Várias regras udev do OpenRGB estão instaladas.</p><p>O arquivo de regras udev 60-openrgb.rules está instalado tanto em /etc/udev/rules.d como em /usr/lib/udev/rules.d.</p><p>Ter vários arquivos de regras udev pode causar conflitos, é recomendado remover um deles.</p> - - SerialSettingsEntry @@ -2510,7 +1884,7 @@ Porta: - + No serial ports found Nenhum porta serial encontrada @@ -2518,353 +1892,285 @@ Settings - + Load Window Geometry Carregar geometria da janela - 90000 - 90000 - - - + Run Zone Checks on Rescan Verificar zonas ao buscar dispositivos - Start Server - Iniciar servidor - - - + Start Minimized Iniciar minimizado - User Interface Settings: - Configurações da interface de usuário: - - - + Start at Login Iniciar com o usuário - + Minimize on Close Minimizar ao fechar - + Numerical Labels Rótulos Numéricos - + Display numerical labels for otherwise non-labeled LEDs in the LED view Exibir rótulos numéricos para LEDs não rotulados em visualização de LEDs - + Window Geometry Geometria da Janela - + Save on Exit Salvar a geometria ao fechar - Start Client - Iniciar cliente - - - Load Profile - Carregar perfil - - - Set Server Port - Definir porta do servidor - - - + HID Safe Mode Modo Seguro HID - + Use an alternate method for detecting HID devices Use um método alternativo para detectar dispositivos HID - + Initial Detection Delay (ms) Atraso Inicial de Detecção (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started Quantidade de tempo, em milissegundos, para esperar antes de detectar dispositivos ao iniciar - + Detection Detecção - + Enable Log Console Ativar o console de registros - + Log Level Nível de Log - + Log File Count Limit Limite do Número de Arquivos de Log - + Maximum number of log files to keep, 0 for no limit Número máximo de arquivos de log a serem mantidos, 0 para nenhum limite - + Log Manager Gerente de Log - + Serve All Controllers Atender Todos os Controladores - + Include controllers provided by client connections and plugins Incluir controladores fornecidos por conexões de cliente e plugins - + Default Host Host Padrão - + Default Port Porta Padrão - + Legacy Workaround Trabalho com Solução Alternativa - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Contorno para algumas implementações mais antigas do SDK que enviavam o tamanho incorreto do pacote para certos pacotes - + Server Servidor - + Custom Arguments Argumentos personalizados - Log Manager Settings: - Configurações do gerenciador de registros: - - - Start at Login Status - Estado do Iniciar com o usuário - - - Start at Login Settings: - Configurações do Iniciar com o usuário: - - - Open Settings Folder - Abrir a pasta das configurações - - - Drivers Settings - Configurações de drivers - - - + Monochrome Tray Icon Ícone da bandeja cinza - + Save window geometry on exit Salvar a geometria da janela ao sair - + X X - + Y Y - + Width Largura - + Height Altura - + User Interface Interface do Usuário - + SMBus Sleep Mode (restart required) Modo de Sono SMBus (reinício necessário) - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: Reduz o uso da CPU (reinício necessário) - Set Profile on Exit - Definir perfil ao sair - - - + Shared SMBus Access (restart required) Acesso ao SMBus compartilhado (reinício necessário) - Set Server Host - Definir host do servidor - - - + Language Idioma - + Disable Key Expansion Desativar expensão de chave na visualização de dispositivos - + Hex Format Formato hexadecimal - + Enable Start at Login Habilitar início ao fazer login - + Start OpenRGB on login Iniciar OpenRGB ao fazer login - + Start minimized to the system tray Iniciar minimizado na bandeja do sistema - + Additional command line arguments to pass to OpenRGB when starting on login Argumentos adicionais de linha de comando para passar ao OpenRGB ao iniciar no login - + Language for the user interface Idioma para a interface do usuário - + Keep OpenRGB active in the system tray when closing the main window Mantenha o OpenRGB ativo na bandeja do sistema ao fechar a janela principal - + Use a monochrome icon in the system tray instead of a full color icon Use um ícone em preto e branco na bandeja do sistema em vez de um ícone em cores completas - + Select #BBGGRR or #RRGGBB format for hex display and input Selecione o formato #BBGGRR ou #RRGGBB para exibição e entrada em hexadecimal - + Compact Tabs Abas Compactas - + Display sidebar tabs as icons only Exibir abas da barra lateral apenas como ícones - + Tabs on Top 'Abas no Topo' - + Display tabs on top instead of on the left Exibir abas na parte superior em vez da parte esquerda - + Show LED View by Default Mostrar visualização de LEDs por padrão - + Drivers Drivers - Set Profile on Suspend - Definir perfil ao suspender - - - Set Profile on Resume - Definir perfil ao retomar - - - + Enable Log File Ativar arquivo de registros - - A problem occurred enabling Start at Login. - Um problema ocorreu ao ativar o Iniciar com o usuário. - English - US Português - BR - - System Default - Padrão do sistema - Load Profile on Exit @@ -2897,16 +2203,36 @@ + Load Profile on Service Shutdown + Carregar Perfil ao Desligar o Serviço + + + + Profile to load when the OpenRGB background service shuts down + Perfil a carregar quando o serviço em segundo plano do OpenRGB for desligado + + + + Load Profile on Service Startup + Carregar Perfil no Início do Serviço + + + + Profile to load when the OpenRGB background service starts up + Perfil a carregar quando o serviço em segundo plano do OpenRGB iniciar + + + Load Profile on Suspend Carregar Perfil ao Suspender - + Profile to load before system enters sleep mode Perfil para carregar antes que o sistema entre no modo de suspensão - + Profile Manager Gerente de Perfil diff --git a/qt/i18n/OpenRGB_ru_RU.ts b/qt/i18n/OpenRGB_ru_RU.ts index 8cdc5c027..e8734031e 100644 --- a/qt/i18n/OpenRGB_ru_RU.ts +++ b/qt/i18n/OpenRGB_ru_RU.ts @@ -92,7 +92,7 @@ Порт: - + No serial ports found Не найдено последовательных портов @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Некоторые внутренние устройства могут не быть обнаружены:</h2><p>Один или несколько интерфейсов I2C или SMBus не удалось инициализировать.</p><p><b>Модули RGB DRAM, встроенное RGB-освещение некоторых материнских плат и RGB-видеокарты не будут доступны в OpenRGB</b> без I2C или SMBus.</p><h4>Как это исправить:</h4><p>На Windows это обычно вызвано неудачей загрузки драйвера PawnIO.</p><p>Сначала вы должны установить <a href='https://pawnio.eu/'>PawnIO</a>, затем вы должны запустить OpenRGB от имени администратора, чтобы получить доступ к этим устройствам.</p><p>См. <a href='https://help.openrgb.org/'>help.openrgb.org</a> для дополнительных шагов устранения неполадок, если вы продолжаете видеть это сообщение.<br></p><h3>Если вы не используете встроенное RGB на настольном компьютере, это сообщение для вас не важно.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Часть встроенного оборудования ПК могла быть не обнаружена:</h2><p>Некоторые интерфейсы I2C или SMBus не инициализировались.</p><p>Для доступа к <b>модулям RGB DRAM, встроенной подсветке некоторых материнских плат и видеокарт</b>, OpenRGB требуется доступ к I2C и SMBus.</p><h4>Как это исправить:</h4>На системах с ОС Linux, это обычно связано с тем, что модуль i2c-dev не загружен.</p><p>Вам нужно загрузить модуль i2c-dev вместе с модулем i2c, соответствующим вашей материнской плате. Для систем на AMD это обычно i2c-piix4, а для систем Intel - i2c-i801.</p<p>Если данное сообщение продолжает появляться - см. <a href='https://help.openrgb.org/'>help.openrgb.org</a>.<br></p><h3>Если вы не используете встроенную RGB подсветку на стационарном ПК, это сообщение можно проигнорировать.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>ВНИМАНИЕ:</h2><p>Файл с правилами udev для OpenRGB не установлен.</p><p>Большинство устройств не будут доступны, если только OpenRGB не запущен от имени root.</p><p>Вам нужно установить правила udev самостоятельно, если вы установили OpenRGB в формате AppImage, Flatpak, или скомпилировали из исходного кода самостоятельно.</p><p>См. инструкцию по установке правил udev на <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a></p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ВНИМАНИЕ:</h2><p>Обнаружено несколько файлов с правилами udev для OpenRGB.</p><p>Файл 60-openrgb.rules установлен как в /etc/udev/rules.d, так и в /usr/lib/udev/rules.d.</p><p>Несколько наборов правил могут конфликтовать между собой, рекомендуется удалить один из них.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Предупреждение:</h2><p>Один или несколько интерфейсов I2C/SMBus не удалось инициализировать.</p><p>В зависимости от того, какие интерфейсы не удалось инициализировать, некоторые модули RGB DRAM, встроенное освещение RGB на некоторых материнских платах и графические карты RGB могут быть недоступны в OpenRGB.</p><p>На Windows это обычно вызвано неудачей загрузки драйвера PawnIO.</p><p>Чтобы OpenRGB мог получить доступ к этим устройствам, необходимо установить PawnIO с <a href='https://pawnio.eu/'>https://pawnio.eu</a> и запустить OpenRGB от имени администратора или как службу системы.</p><p>Если вы не используете ни одно из перечисленных выше устройств, вы можете безопасно игнорировать это сообщение.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Предупреждение:</h2><p>Один или несколько интерфейсов I2C/SMBus не удалось инициализировать.</p><p>В зависимости от того, какие интерфейсы не удалось инициализировать, некоторые модули RGB DRAM, встроенное освещение RGB на некоторых материнских платах и графические карты RGB могут быть недоступны в OpenRGB.</p><p>На Linux это обычно происходит из-за того, что модуль i2c-dev не загружен.</p><p>Чтобы OpenRGB мог получить доступ к этим устройствам, необходимо загрузить модуль i2c-dev вместе с правильным модулем драйвера I2C для вашей материнской платы. Обычно это i2c-piix4 для систем на базе AMD и i2c-i801 для систем на базе Intel.</p><p>Если вы не используете ни одно из перечисленных выше устройств, вы можете безопасно игнорировать это сообщение.</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Предупреждение:</h2><p>Правила udev для OpenRGB не установлены.</p><p>Большинство устройств не будут доступны, если запускать OpenRGB не от имени root.</p><p>Если вы используете AppImage, Flatpak или собранные вручную версии OpenRGB, вам необходимо вручную установить правила udev.</p><p>См. <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>, чтобы вручную установить правила udev.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Предупреждение:</h2><p>Правила udev для OpenRGB не установлены.</p><p>Большинство устройств не будут доступны, если не запускать OpenRGB как системный служебный процесс или с правами root.</p><p>Если вы используете AppImage, Flatpak или собранные вручную версии OpenRGB, вам необходимо вручную установить правила udev.</p><p>См. <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>, чтобы вручную установить правила udev.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Предупреждение:</h2><p>Установлены несколько udev правил OpenRGB.</p><p>Файл правил udev 60-openrgb.rules установлен в обеих папках /etc/udev/rules.d и /usr/lib/udev/rules.d.</p><p>Наличие нескольких файлов правил udev может вызвать конфликты, рекомендуется удалить один из них.</p> @@ -234,22 +218,6 @@ Name: Название: - - Matrix Order: - Порядок матрицы: - - - Matrix Height: - Высота матрицы: - - - Matrix Width: - Ширина матрицы: - - - Type: - Тип: - IP (Unicast): @@ -265,54 +233,6 @@ Keepalive Time: Таймаут: - - RGB Order: - Порядок RGB: - - - Single - Однородная область - - - Linear - Линейная область - - - Matrix - Матрица - - - Horizontal Top Left - Горизонтально, слева направо и сверху вниз - - - Horizontal Top Right - Горизонтально, справа налево и сверху вниз - - - Horizontal Bottom Left - Горизонтально, слева направо и снизу вверх - - - Horizontal Bottom Right - Горизонтально, справа налево и снизу вверх - - - Vertical Top Left - Вертикально, сверху вниз и слева направо - - - Vertical Top Right - Вертикально, сверху вниз и справа налево - - - Vertical Bottom Left - Вертикально, снизу вверх и слева направо - - - Vertical Bottom Right - Вертикально, снизу вверх и справа налево - ElgatoKeyLightSettingsEntry @@ -402,15 +322,7 @@ ManualDevice - E1.31 (including WLED) - E1.31 (включая WLED) - - - QMK (built with ORGB support) - QMK (собранное с поддержкой ORGB) - - - + Serial Device Устройство последовательного порта (Arduino) @@ -571,15 +483,20 @@ Сохранить подключение - + Rescan Devices Обновить список устройств - + Disconnect Разъединить + + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB работает в режиме локального клиента. Локальное соединение может не быть разорвано. + OpenRGBDeviceEditorDialog @@ -590,44 +507,64 @@ + Device Configuration + Настройка устройства + + + + Device Name: + Название устройства: + + + Device-Specific Configuration Настройка, специфичная для устройства + + + Reset Device Configuration + Сброс настроек устройства + OpenRGBDeviceInfoPage - + Name: Название: - + Vendor: Изготовитель: - + Type: Тип: - + + Display Name: + Имя устройства: + + + Description: Описание: - + Version: Версия: - + Location: Расположение: - + Serial: Серийный номер: @@ -736,7 +673,7 @@ V: - + Edit Zone Редактировать зону @@ -757,118 +694,138 @@ - + Save To Device Сохранить на устройстве - + Set individual LEDs to static colors. Safe for use with software-driven effects. Устанавливает статичный цвет для каждого светодиода. Безопасен для использования с программными эффектами. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Устанавливает статичный цвет для каждого светодиода. Небезопасен для использования с программными эффектами. - + Sets the entire device or a zone to a single color. Задаёт один цвет для всего устройства или области. - + Gradually fades between fully off and fully on. Плавно включается и выключается. - + Abruptly changes between fully off and fully on. Резко включается и выключается. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Плавно меняет цвет по радуге. Все светодиоды устройства одного цвета. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Плавно меняет цвет. Создаёт движущуюся радугу. - + Flashes lights when keys or buttons are pressed. Вспыхивает при нажатии клавишей или кнопок. - - + + Entire Device Устройство целиком - + Edit Device - + Редактировать устройство - + Entire Zone Область целиком - + Entire Segment Сегмент целиком - + Left Влево - + Right Вправо - + Up Вверх - + Down Вниз - + Horizontal Горизонтально - + Vertical Вертикально - - Saved To Device - Сохранено на устройстве + + Up-Left + - + + Up-Right + Вверх-влево + + + + Down-Left + Вверх-вправо + + + + Down-Right + Вниз-влево + + + + Saved To Device + Вниз-вправо + + + Saving Not Supported Сохранение не поддерживается - + All Zones Все области - + Mode Specific Задаётся режимом @@ -907,7 +864,8 @@ - + + Rescan Devices Обновить список устройств @@ -920,14 +878,10 @@ - + Delete Profile Удалить профиль - - Load Profile - Применить профиль - OpenRGB is detecting devices... @@ -949,112 +903,124 @@ Сохранить профиль с другим названием - + + Show/Hide Показать/скрыть - + + Profiles Профили - + + Quick Colors Палитра - + + Red Красный - + + Yellow Жёлтый - + + Green Зелёный - + + Cyan Бирюзовый - + + Blue Синий - + + Magenta Лиловый - + + White Белый - + + Lights Off Цвета выкл. - + + Exit Выход - + Plugins Подключаемые модули - + Supported Devices Поддерживаемые устройства - + General Settings Общие настройки - + SMBus Tools Инструменты SMBus - + SDK Client Клиент SDK - + SDK Server Сервер SDK - + Do you really want to delete this profile? Вы действительно хотите удалить этот профиль? - + Log Console Консоль журналирования - + About OpenRGB О программе OpenRGB - + Manually Added Devices Добавляемые вручную устройства @@ -1158,10 +1124,6 @@ API Version: Версия API: - - API Version Value - Значение версии API - URL: @@ -1192,7 +1154,7 @@ - + Remove Plugin Удалить подключаемый модуль @@ -1202,37 +1164,37 @@ <html><head/><body>Посмотрите список подключаемых модулей на официальном сайте <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Установить подключаемый модуль OpenRGB - + Plugin files (*.dll *.dylib *.so *.so.*) Файлы подключаемых модулей (*.dll *.dylib *.so; *.so.*) - + Replace Plugin Заменить подключаемый модуль - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Подключаемый модуль с таким названием уже существует. Заменить установленный подключаемый модуль? - + Are you sure you want to remove this plugin? Удалить подключаемый модуль? - + Restart Needed Требуется перезапуск - + The plugin will be fully removed after restarting OpenRGB. Плагин будет полностью удалён после перезапуска OpenRGB. @@ -1299,14 +1261,6 @@ OpenRGBProfileListDialog - - Profile Name - Название профиля - - - Save to an existing profile: - Перезаписать существующий профиль: - Profile Selection @@ -1576,10 +1530,6 @@ Address: Адрес: - - Read Device - Считать устройство - SMBus Dumper: @@ -1632,10 +1582,6 @@ Dump Device Получить дамп устройства - - SMBus Reader: - Считыватель SMBus: - Addr: @@ -1654,10 +1600,6 @@ OpenRGBZoneEditorDialog - - Resize Zone - Изменить размер области - Add Segment @@ -1741,14 +1683,6 @@ OpenRGBZoneInitializationDialog - - Zones Resizer - Изменение размера зон - - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>Найдена не настроенная зона изменяемого размера. Зоны изменяемого размера обычно используются для разъёмов адресной ленты, где размер подключенной ленты не может быть определён автоматически.</p><p>Пожалуйста, введите количество светодиодов для каждой такой зоны.</p><p>Подробнее о расчёте правильного размера см. <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">здесь.</span></a></p></body></html> - @@ -1775,10 +1709,6 @@ Ignore Игнорировать - - Resize the zones - Изменение размера областей - Controller @@ -1922,27 +1852,6 @@ USB VID: - - ResourceManager - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the WinRing0 driver.</p><p>You must run OpenRGB as administrator at least once to allow WinRing0 to set up.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - The sentences were rearranged a bit to improve readability - <h2>Часть встроенного оборудования ПК могла быть не обнаружена:</h2><p>Некоторые интерфейсы I2C или SMBus не инициализировались.</p><p>Для доступа к <b>модулям RGB DRAM, встроенной подсветке некоторых материнских плат и видеокарт</b>, OpenRGB требуется доступ к I2C и SMBus.</p><h4>Как это исправить:</h4><p>На системах с ОС Windows, это обычно связано с ошибкой загрузки драйвера WinRing0.</p><p>Вам нужно запустить OpenRGB от имени Администратора хотя бы один раз, чтобы WinRing0 смог установиться.</p><p>Если данное сообщение продолжает появляться - см. <a href='https://help.openrgb.org/'>help.openrgb.org</a>.<br></p><h3>Если вы не используете встроенную RGB подсветку на стационарном ПК, это сообщение можно проигнорировать.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - The sentences were rearranged a bit to improve readability - <h2>Часть встроенного оборудования ПК могла быть не обнаружена:</h2><p>Некоторые интерфейсы I2C или SMBus не инициализировались.</p><p>Для доступа к <b>модулям RGB DRAM, встроенной подсветке некоторых материнских плат и видеокарт</b>, OpenRGB требуется доступ к I2C и SMBus.</p><h4>Как это исправить:</h4>На системах с ОС Linux, это обычно связано с тем, что модуль i2c-dev не загружен.</p><p>Вам нужно загрузить модуль i2c-dev вместе с модулем i2c, соответствующим вашей материнской плате. Для систем на AMD это обычно i2c-piix4, а для систем Intel - i2c-i801.</p<p>Если данное сообщение продолжает появляться - см. <a href='https://help.openrgb.org/'>help.openrgb.org</a>.<br></p><h3>Если вы не используете встроенную RGB подсветку на стационарном ПК, это сообщение можно проигнорировать.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>ВНИМАНИЕ:</h2><p>Файл с правилами udev для OpenRGB не установлен.</p><p>Большинство устройств не будут доступны, если только OpenRGB не запущен от имени root.</p><p>Вам нужно установить правила udev самостоятельно, если вы установили OpenRGB в формате AppImage, Flatpak, или скомпилировали из исходного кода самостоятельно.</p><p>См. инструкцию по установке правил udev на <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a></p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ВНИМАНИЕ:</h2><p>Обнаружено несколько файлов с правилами udev для OpenRGB.</p><p>Файл 60-openrgb.rules установлен как в /etc/udev/rules.d, так и в /usr/lib/udev/rules.d.</p><p>Несколько наборов правил могут конфликтовать между собой, рекомендуется удалить один из них.</p> - - SerialSettingsEntry @@ -1976,7 +1885,7 @@ Протокол: - + No serial ports found Не найдено последовательных портов @@ -1984,350 +1893,285 @@ Settings - + Load Window Geometry Загружать геометрию окна - + Run Zone Checks on Rescan Проверять области при повторном сканировании - Start Server - Запускать сервер - - - + Show LED View by Default Показывать LED View при запуске - Set Profile on Suspend - Установить профиль при входе в спящий режим - - - + Start Minimized Запускать в свёрнутом виде - User Interface Settings: - Настройка параметров интерфейса: - - - Set Profile on Resume - Установить профиль при пробуждении - - - + Start at Login Запускать при входе в систему - + HID Safe Mode Режим безопасного использования HID - + Use an alternate method for detecting HID devices Использовать альтернативный метод для обнаружения устройств HID - + Initial Detection Delay (ms) Задержка первоначального обнаружения (мс) - + Amount of time, in milliseconds, to wait before detecting devices when started Количество времени в миллисекундах, которое нужно подождать перед обнаружением устройств при запуске - + Detection Обнаружение - + Enable Log File Включить ведение лога - + Log Level Уровень журналирования - + Log File Count Limit Ограничение количества файлов журнала - + Maximum number of log files to keep, 0 for no limit Максимальное количество файлов журналов для сохранения, 0 для отсутствия ограничения - + Log Manager Менеджер журналов - + Serve All Controllers Сервировать все контроллеры - + Include controllers provided by client connections and plugins Включать контроллеры, предоставляемые клиентскими соединениями и плагинами - + Default Host Значение по умолчанию - + Default Port Рабочий порт по умолчанию - + Legacy Workaround Устаревший обходной путь - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Обходной путь для некоторых более старых реализаций SDK, которые отправляли неправильный размер пакета для определенных пакетов - + Server Сервер - + Minimize on Close Сворачивать вместо закрытия - + Select #BBGGRR or #RRGGBB format for hex display and input Выберите формат #BBGGRR или #RRGGBB для отображения и ввода шестнадцатеричных чисел - + Compact Tabs Компактные вкладки - + Display sidebar tabs as icons only Отображать вкладки боковой панели только как значки - + Tabs on Top Вкладки сверху - + Display tabs on top instead of on the left Отображать вкладки сверху вместо слева - + Numerical Labels Цифровые метки - + Display numerical labels for otherwise non-labeled LEDs in the LED view Отображать числовые метки для светодиодов, которые иначе не имеют меток, в представлении светодиодов - + Window Geometry Геометрия окна - + Save on Exit Сохранять размеры окна при закрытии - + Drivers Драйверы - Start Client - Запускать клиент - - - Load Profile - Установить профиль при запуске - - - Set Server Port - Задать порт для сервера - - - + Enable Log Console Включить консоль журналирования - + Custom Arguments Параметры командной строки при автоматическом запуске - Log Manager Settings: - Настройка параметров журналирования: - - - Start at Login Status - Состояние автоматического запуска при входе в систему - - - Start at Login Settings: - Настройки запуска при входе в систему: - - - Open Settings Folder - Открыть папку настроек - - - Drivers Settings - Параметры драйверов - - - + Monochrome Tray Icon Отображение значка в системном лотке в оттенках серого - + Save window geometry on exit Сохранять геометрию окна при выходе - + X X - + Y Y - + Width Ширина - + Height Высота - + User Interface Пользовательский интерфейс - + SMBus Sleep Mode (restart required) Режим сна SMBus (требуется перезагрузка) - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: уменьшить загрузку ЦП (потребуется перезапуск) - + Disable Key Expansion Отключить расширение клавиш в LED View - + Enable Start at Login Включить запуск при входе - + Start OpenRGB on login Запускать OpenRGB при входе в систему - + Start minimized to the system tray Запускать minimized в системный tray - + Additional command line arguments to pass to OpenRGB when starting on login Дополнительные аргументы командной строки, которые следует передать OpenRGB при запуске при входе в систему - + Language for the user interface Язык для пользовательского интерфейса - + Keep OpenRGB active in the system tray when closing the main window Оставлять OpenRGB активным в системном лотке при закрытии основного окна - + Use a monochrome icon in the system tray instead of a full color icon Использовать монохромный значок в системном трее вместо полноцветного значка - + Hex Format Формат шестнадцатеричных чисел (HEX) - Set Profile on Exit - Установить профиль при закрытии программы - - - + Shared SMBus Access (restart required) Общий доступ к SMBus (потребуется перезапуск) - Set Server Host - The server will only accept connections that are targeting this one specific IP - the machine may have more than one, but all others will be rejected - Принимать подключения к серверу только на заданном IP - - - + Language Язык - - A problem occurred enabling Start at Login. - Проблема при включении автозапуска. - English - US Русский - - System Default - Определяется ОС - Load Profile on Exit @@ -2360,16 +2204,36 @@ + Load Profile on Service Shutdown + Загружать профиль при отключении службы + + + + Profile to load when the OpenRGB background service shuts down + Профиль, который будет загружен при закрытии фонового сервиса OpenRGB + + + + Load Profile on Service Startup + Загружать профиль при запуске службы + + + + Profile to load when the OpenRGB background service starts up + Профиль, который будет загружен при запуске фонового сервиса OpenRGB + + + Load Profile on Suspend Загружать профиль при приостановке - + Profile to load before system enters sleep mode Профиль для загрузки перед тем, как система перейдет в режим сна - + Profile Manager Менеджер профилей diff --git a/qt/i18n/OpenRGB_tr_TR.ts b/qt/i18n/OpenRGB_tr_TR.ts index 947e023ae..a476f739e 100644 --- a/qt/i18n/OpenRGB_tr_TR.ts +++ b/qt/i18n/OpenRGB_tr_TR.ts @@ -92,7 +92,7 @@ Bağlantı Noktası: - + No serial ports found Hiçbir seri port bulunamadı @@ -158,22 +158,22 @@ DetectionManager - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Uyarı:</h2><p>Bir veya daha fazla I2C/SMBus arayüzü başlatılamadı.</p><p>Başlatılamayan arayüzlerin hangileri olduğuna bağlı olarak, OpenRGB'de bazı RGB DRAM modülleri, bazı anakartların entegre RGB aydınlatması ve RGB grafik kartları kullanılabilir olmayabilir.</p><p>Windows üzerinde bu, genellikle PawnIO sürücüsünün yüklenememesi nedeniyle oluşur.</p><p>OpenRGB'nin bu cihazlara erişebilmesi için, <a href='https://pawnio.eu/'>https://pawnio.eu</a>'den PawnIO'yu yüklemeniz ve OpenRGB'yi yönetici olarak veya sistem hizmeti olarak çalıştırmanız gerekir.</p><p>Yukarıda listelenen cihazlardan hiçbiri kullanmıyorsanız, bu mesajı güvenle ihmal edebilirsiniz. - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Uyarı:</h2><p>Bir veya daha fazla I2C/SMBus arayüzü başlatılamadı.</p><p>Başlatılamayan arayüzlerin hangileri olduğuna bağlı olarak, OpenRGB'de bazı RGB DRAM modülleri, bazı anakartların entegre RGB aydınlatması ve RGB grafik kartları kullanılabilir olmayabilir.</p><p>Linux'ta bu genellikle i2c-dev modülü yüklü değilse olur.</p><p>OpenRGB'ın bu cihazlara erişebilmesi için, anakartınız için doğru I2C sürücü modülü ile birlikte i2c-dev modülünü yüklemeniz gerekir. Bu genellikle AMD sistemler için i2c-piix4 ve Intel sistemler için i2c-i801'dir.</p><p>Eğer yukarıda listelenen cihazlardan hiçbiri kullanmıyorsanız, bu mesajı güvenle ihmal edebilirsiniz.</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Uyarı:</h2><p>OpenRGB udev kuralları yüklü değil.</p><p>OpenRGB'yi kök kullanıcı olarak çalıştırmadan önce çoğu cihaz kullanılamayacaktır.</p><p>AppImage, Flatpak veya kendi derlenmiş OpenRGB sürümlerini kullanıyorsanız, udev kurallarını el ile yüklemeniz gerekir.</p><p>Kuralları el ile yüklemek için <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>'ye bakın.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Uyarı:</h2><p>OpenRGB udev kuralları yüklü değil.</p><p>OpenRGB sistem hizmeti olarak veya root olarak çalışmadığı sürece çoğu cihaz kullanılamayacaktır.</p><p>AppImage, Flatpak veya kendi derlenmiş OpenRGB sürümlerini kullanıyorsanız, udev kurallarını el ile yüklemeniz gerekir.</p><p>Kuralları el ile yüklemek için <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> adresine bakın.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Uyarı:</h2><p>Birden fazla OpenRGB udev kuralı yüklüdür.</p><p>udev kuralları dosyası 60-openrgb.rules hem /etc/udev/rules.d hem de /usr/lib/udev/rules.d içinde yüklenmiştir.</p><p>Birden fazla udev kuralları dosyası çakışabilir, bunlardan birinin kaldırılması önerilir. @@ -218,22 +218,6 @@ Name: İsim: - - Matrix Order: - Matris Sırası: - - - Matrix Height: - Matris Yüksekliği: - - - Matrix Width: - Matris Genişliği: - - - Type: - Tür: - IP (Unicast): @@ -249,54 +233,6 @@ Keepalive Time: Bağlantı Koruma Süresi: - - RGB Order: - RGB Sırası: - - - Single - Basit - - - Linear - Doğrusal - - - Matrix - Matris - - - Horizontal Top Left - Yatay Sol Üst - - - Horizontal Top Right - Yatay Sağ Üst - - - Horizontal Bottom Left - Yatay Sol Alt - - - Horizontal Bottom Right - Yatay Sağ Salt - - - Vertical Top Left - Dikey Sol Üst - - - Vertical Top Right - Dikey Sağ Üst - - - Vertical Bottom Left - Dikey Sol Alt - - - Vertical Bottom Right - Dikey Sağ Alt - ElgatoKeyLightSettingsEntry @@ -386,15 +322,7 @@ ManualDevice - E1.31 (including WLED) - E1.31 (WLED dahil) - - - QMK (built with ORGB support) - QMK (ORGB desteğiyle oluşturulmuştur) - - - + Serial Device Seri Cihaz @@ -555,15 +483,20 @@ Bağlantıyı Kaydet - + Rescan Devices Cihazları Yeniden Tara - + Disconnect Bağlantıyı Kes + + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB yerel istemci modundadır. Yerel bağlantı kesilemez. + OpenRGBDeviceEditorDialog @@ -574,44 +507,64 @@ + Device Configuration + Cihaz Yapılandırması + + + + Device Name: + Cihaz Adı: + + + Device-Specific Configuration Cihaz Özelliğine Göre Yapılandırma + + + Reset Device Configuration + Cihaz Yapılandırmasını Sıfırla + OpenRGBDeviceInfoPage - + Name: İsim: - + Vendor: Üretici: - + Type: Tür: - + + Display Name: + Gösterim Adı: + + + Description: Açıklama: - + Version: Sürüm: - + Location: Konum: - + Serial: Seri: @@ -709,7 +662,7 @@ V: - + Edit Zone Alanı Düzenle @@ -730,7 +683,7 @@ - + Save To Device Cihaza Kaydet @@ -740,112 +693,138 @@ Hex: + Edit - Düzenle + Düzenle - + Set individual LEDs to static colors. Safe for use with software-driven effects. LED'leri tek tek sabit renklere ayarlayın. Yazılım tabanlı efektlerle kullanım için güvenlidir. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. LED'leri tek tek statik renklere ayarlayın. Yazılım tabanlı efektlerle kullanım için güvenli değildir. - + Sets the entire device or a zone to a single color. Cihazın tamamını veya belirlenen bir bölgeyii tek bir renge ayarlar. - + Gradually fades between fully off and fully on. Yavaş yavaş tamamen kapalı ve tamamen açık arasında geçiş yapar. - + Abruptly changes between fully off and fully on. Tamamen kapalı ve tamamen açık durumlar arasında ani geçiş yapar. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Renk spektrumunun tamamını kademeli olarak dolaşır. Cihazdaki tüm ışıklar aynı renktedir. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Renk spektrumunun tamamını kademeli olarak dolaşır. Hareketli bir gökkuşağı deseni oluşturur. - + Flashes lights when keys or buttons are pressed. Tuşlara veya düğmelere basıldığında ışıklar yanıp söner. - - + + Entire Device Tüm Cihaz - + + Edit Device + Cihazı Düzenle + + + Entire Zone Tüm Bölge - + Left Sol - + Right Sağ - + Up Yukarı - + Down Aşağı - + Horizontal Yatay - + Vertical Dikey - + + Up-Left + Yukarı-Sol + + + + Up-Right + Sağ-Yukarı + + + + Down-Left + Aşağı-Sol + + + + Down-Right + Aşağı-Sağ + + + Saved To Device Saved To Device - + Saving Not Supported Kaydetme Desteklenmiyor - + All Zones Tüm Bölgeler - + Mode Specific Özel Mod - + Entire Segment Tüm Bölüm @@ -884,7 +863,8 @@ - + + Rescan Devices Cihazları Yeniden Tara @@ -897,14 +877,10 @@ - + Delete Profile Profili Sil - - Load Profile - Profil Yükle - OpenRGB is detecting devices... @@ -926,112 +902,124 @@ Profili özel adla kaydet - + + Show/Hide Göster/Gizle - + + Profiles Profiller - + + Quick Colors Hızlı Renkler - + + Red Kırmızı - + + Yellow Sarı - + + Green Yeşil - + + Cyan Camgöbeği - + + Blue Mavi - + + Magenta Fuşya - + + White Beyaz - + + Lights Off Işıklar Kapalı - + + Exit Çık - + Plugins Eklentiler - + General Settings Genel Ayarlar - + SMBus Tools SMBus Araçları - + SDK Client SDK İstemcisi - + SDK Server SDK Sunucusu - + Do you really want to delete this profile? Bu profili gerçekten silmek istiyor musunuz? - + Log Console Günlük Konsolu - + Supported Devices Supported Devices - + About OpenRGB OpenRGB Hakkında - + Manually Added Devices Elle Eklenen Cihazlar @@ -1155,10 +1143,6 @@ API Version: API Sürümü: - - API Version Value - APU Sürümü Değeri - OpenRGBPluginsPage @@ -1169,7 +1153,7 @@ - + Remove Plugin Eklentiyi Kaldır @@ -1179,37 +1163,37 @@ <html><head/><body>Eklenti mi arıyorsunuz? Resmî listeye <a href="https://openrgb.org/plugins.html">OpenRGB.org</a> üzerinden ulaşabilirsiniz.</body></html> - + Install OpenRGB Plugin OpenRGB Eklentisini Yükle - + Plugin files (*.dll *.dylib *.so *.so.*) Eklenti dosyaları (*.dll *.dylib *.so *.so.*) - + Replace Plugin Eklentiyi Değiştir - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Bu dosya adına sahip bir eklenti zaten yüklü. Bu eklentiyi değiştirmek istediğinizden emin misiniz? - + Are you sure you want to remove this plugin? Bu eklentiyi kaldırmak istediğinizden emin misiniz? - + Restart Needed Yeniden Başlatılması Gerekiyor - + The plugin will be fully removed after restarting OpenRGB. OpenRGB yeniden başlatıldıktan sonra eklenti tamamen kaldırılacaktır. @@ -1276,14 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - Profil Adı - - - Save to an existing profile: - Mevcut bir profile kaydet: - Profile Selection @@ -1447,14 +1423,6 @@ Website: Web Sayfası: - - <a href="https://openrgb.org">https://openrgb.org</a> - <a href="https://openrgb.org">https://openrgb.org</a> - - - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - SDK Version: @@ -1465,10 +1433,6 @@ Plugin API Version: Eklenti API Sürümü: - - Qt Version Value - Qt Sürüm Değeri - Qt Version: @@ -1479,10 +1443,6 @@ OS Version: İşletim Sistemi Sürümü: - - OS Version Value - İşletim Sistemi Değeri - GNU General Public License, version 2 @@ -1569,10 +1529,6 @@ Address: Adres: - - Read Device - Cihazı Oku - SMBus Dumper: @@ -1625,10 +1581,6 @@ Dump Device Cihaz Dökümü - - SMBus Reader: - SMBus Okuyucusu: - Addr: @@ -1647,10 +1599,6 @@ OpenRGBZoneEditorDialog - - Resize Zone - Bölgeyi Yeniden Boyutlandır - Add Segment @@ -1760,18 +1708,6 @@ Ignore Yoksay - - Zones Resizer - Bölge Boyutlandırıcı - - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>Bir veya daha fazla yeniden boyutlandırılabilir bölge yapılandırılmamış. Yeniden boyutlandırılabilir bölgeler genellikle bağlı cihazın boyutu otomatik olarak algılanamayan adreslenebilir RGB başlıkları için kullanılır.</p><p>Lütfen her bölgedeki LED sayısını aşağıya girin.</p><p>Doğru boyutu hesaplamak hakkında daha fazla bilgi için lütfen <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">bu bağlantıya</span></a> göz atın.</p></body></html> - - - Resize the zones - Bölgeleri yeniden boyutlandır - Controller @@ -1871,10 +1807,6 @@ QMKORGBSettingsEntry - - QMK Device - QMK Cihazı - QMK OpenRGB Device @@ -1919,25 +1851,6 @@ USB VID: - - ResourceManager - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the WinRing0 driver.</p><p>You must run OpenRGB as administrator at least once to allow WinRing0 to set up.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Bazı dahili cihazlar algılanamayabilir:</h2><p>Bir veya daha fazla I2C veya SMBus arabirimi başlatılamadı.</p><p><b>I2C veya SMBus olmadan; RGB DRAM modülleri, bazı anakartların dahili RGB aydınlatmaları ve RGB ekran kartları OpenRGB’de kullanılamaz.</b></p><h4>Bu sorunu nasıl düzeltebilirsiniz:</h4><p>Windows’ta bu durum genellikle WinRing0 sürücüsünün yüklenememesinden kaynaklanır.</p><p>WinRing0’ın kurulabilmesi için OpenRGB’yi en az bir kez yönetici olarak çalıştırmanız gerekir.</p><p>Bu mesajı görmeye devam ederseniz, ek sorun giderme adımları için <a href='https://help.openrgb.org/'>help.openrgb.org</a> adresini ziyaret edin.<br></p><h3>Masaüstü bilgisayarınızda dahili RGB kullanmıyorsanız, bu mesaj sizin için önemli değildir.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Bazı dahili cihazlar algılanamayabilir:</h2><p>Bir veya daha fazla I2C veya SMBus arabirimi başlatılamadı.</p><p><b>I2C veya SMBus olmadan; RGB DRAM modülleri, bazı anakartların dahili RGB aydınlatmaları ve RGB ekran kartları OpenRGB’de kullanılamaz.</b></p><h4>Bu sorunu nasıl düzeltebilirsiniz:</h4><p>Linux’ta bu durum genellikle i2c-dev modülünün yüklü olmamasından kaynaklanır.</p><p>Anakartınız için doğru I2C sürücüsüyle birlikte i2c-dev modülünü yüklemeniz gerekir. Bu genellikle AMD sistemlerde <b>i2c-piix4</b>, Intel sistemlerde ise <b>i2c-i801</b> modülüdür.</p><p>Bu mesajı görmeye devam ederseniz, ek sorun giderme adımları için <a href='https://help.openrgb.org/'>help.openrgb.org</a> adresini ziyaret edin.</p><h3>Masaüstü bilgisayarda dahili RGB kullanmıyorsanız bu mesaj sizin için önemli değildir.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>UYARI:</h2><p>OpenRGB udev kuralları yüklü değil.</p><p>OpenRGB root olarak çalıştırılmadığı sürece çoğu cihaz kullanılamayacaktır.</p><p>AppImage, Flatpak veya kendiniz derlediğiniz OpenRGB sürümlerini kullanıyorsanız udev kurallarını manuel olarak yüklemeniz gerekir.</p><p>udev kurallarını manuel olarak yüklemek için <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> adresini ziyaret edin.</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>UYARI:</h2><p>Birden fazla OpenRGB udev kuralı yüklü.</p><p>60-openrgb.rules udev kural dosyası hem /etc/udev/rules.d hem de /usr/lib/udev/rules.d dizinlerinde bulunuyor.</p><p>Birden fazla udev kural dosyası çakışmaya neden olabilir, bunlardan birinin kaldırılması önerilir.</p> - - SerialSettingsEntry @@ -1971,7 +1884,7 @@ Protokol: - + No serial ports found Seri port bulunamadı @@ -1979,349 +1892,285 @@ Settings - + Load Window Geometry Pencere Geometrisini Yükle - + Run Zone Checks on Rescan Yeniden Taramada Bölge Kontrollerini Çalıştır - Start Server - Sunucuyu Başlat - - - + Start Minimized Başlangıçta Simge Durumuna Küçült - User Interface Settings: - Kullanıcı Arayüzü Ayarları: - - - + Start at Login Oturum Açıldığında Başlat - + Minimize on Close Kapatıldığında Simge Durumuna Küçült - + Numerical Labels Sayısal Etiketler - + Display numerical labels for otherwise non-labeled LEDs in the LED view LED görünümünde etiketsiz olan LED'ler için sayısal etiketler görüntüleyin - + Window Geometry Pencere Geometrisi - + Save on Exit Kapatırken Geometriyi Kaydet - Start Client - İstemciyi Başlat - - - Load Profile - Profili Yükle - - - Set Server Port - Sunucu Bağlantı Noktasını Ayarla - - - + HID Safe Mode HID Güvenli Mod - + Use an alternate method for detecting HID devices HID cihazlarını tespit etmek için alternatif bir yöntem kullan - + Initial Detection Delay (ms) İlk Tespit Gecikmesi (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started Başlatıldığında cihazları tespit etmeden beklemek için geçen zaman (milisaniye cinsinden) - + Detection Tespit - + Enable Log Console Kayıt Konsolunu Etkinleştir - + Log Level Günlük Seviyesi - + Log File Count Limit Günlük Dosya Sayısı Sınırı - + Maximum number of log files to keep, 0 for no limit Korumak için tutulacak en fazla günlük dosyası sayısı, sınırsız için 0 - + Log Manager Günlük Yöneticisi - + Serve All Controllers Tüm Kontrolcüleri Sun - + Include controllers provided by client connections and plugins İstemci bağlantıları ve eklentiler tarafından sağlanan denetleyicileri dahil et - + Default Host Varsayılan Sunucu - + Default Port Varsayılan Port - + Legacy Workaround Geleneksel Çözüm - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Bazı daha eski SDK uygulamaları için, belirli paketler için yanlış paket boyutu gönderen bir geçici çözüm - + Server Sunucu - + Custom Arguments Özel Argümanlar - Log Manager Settings: - Kayıt Yöneticisi Ayarları: - - - Start at Login Status - Oturum Açıldığında Başlatma Durumu - - - Start at Login Settings: - Oturum Açıldığında Başlatma Ayarları: - - - Open Settings Folder - Ayarlar Klasörünü Aç - - - Drivers Settings - Sürücü Ayarları - - - + Monochrome Tray Icon Gri Tonlu Sistem Tepsisi Simgesi - + Save window geometry on exit Çıkışta pencere geometrisini kaydet - + X - + X - + Y - + Width Genişlik - + Height Yükseklik - + User Interface Kullanıcı Arayüzü - + SMBus Sleep Mode (restart required) SMBus Uyku Modu (yeniden başlatma gerekli) - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: CPU Kullanımını Azalt (yeniden başlatma gerekli) - Set Profile on Exit - Çıkışta Profili Ayarla - - - + Shared SMBus Access (restart required) Paylaşılan SMBus Erişimi (yeniden başlatma gerekli) - Set Server Host - Sunucu Ana Bilgisayarını Ayarla - - - + Language Dil - + Disable Key Expansion Cihaz Görünümünde Tuş Genişletmeyi Devre Dışı Bırak - + Hex Format Hex Formatı - + Enable Start at Login Girişte Başlatı - + Start OpenRGB on login Giriş yaparken OpenRGB'i başlat - + Start minimized to the system tray Sisteme en az gösterilmesi için sistem sepetine başla - + Additional command line arguments to pass to OpenRGB when starting on login Kullanıcı girişi sırasında OpenRGB başlatıldığında geçirilecek ek komut satırı argümanları - + Language for the user interface Kullanıcı arayüzü için dil - + Keep OpenRGB active in the system tray when closing the main window Ana pencere kapatıldığında OpenRGB'i sistem çantasında aktif tut - + Use a monochrome icon in the system tray instead of a full color icon Sistem sehpesinde tam renkli bir ikon yerine monokrom bir ikon kullan - + Select #BBGGRR or #RRGGBB format for hex display and input #BBGGRR veya #RRGGBB formatını ondalık ve girdi için onaltılık olarak seçin - + Compact Tabs Kompakt Sekmeler - + Display sidebar tabs as icons only Yan çubuk sekmesini yalnızca simgeler olarak göster - + Tabs on Top Üstte Sekmeler - + Display tabs on top instead of on the left Sol tarafta yerine sekme çubuklarını üstte görüntüle - + Show LED View by Default Varsayılan olarak LED görünümünü göster - + Drivers Sürücüler - Set Profile on Suspend - Askıya alındığında profili ayarla - - - Set Profile on Resume - Devam edildiğinde profil ayarla - - - + Enable Log File Kayıt dosyasını etkinleştir - - A problem occurred enabling Start at Login. - Oturum açarken Başlat özelliği etkinleştirilirken bir sorun oluştu. - English - US Türkçe - TR - - System Default - Sistem Varsayılanı - Load Profile on Exit @@ -2354,16 +2203,36 @@ + Load Profile on Service Shutdown + Hizmet Kapatıldığında Profil Yükle + + + + Profile to load when the OpenRGB background service shuts down + Açılışta OpenRGB arka plan hizmeti kapatıldığında yüklenecek profil + + + + Load Profile on Service Startup + Hizmet Başlangıçında Profil Yükle + + + + Profile to load when the OpenRGB background service starts up + OpenRGB arka plan hizmeti başlatıldığında yüklenecek profil + + + Load Profile on Suspend Suspend durumunda profil yükle - + Profile to load before system enters sleep mode Uyku moduna girmeden önce yüklenecek profil - + Profile Manager Profil Yöneticisi diff --git a/qt/i18n/OpenRGB_uk_UA.ts b/qt/i18n/OpenRGB_uk_UA.ts index 4bdec0644..ec32dab35 100644 --- a/qt/i18n/OpenRGB_uk_UA.ts +++ b/qt/i18n/OpenRGB_uk_UA.ts @@ -92,7 +92,7 @@ Порт: - + No serial ports found Не знайдено послідовних портів @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Некоторі внутрішні пристрої можуть не бути виявлені:</h2><p>Один або кілька інтерфейсів I2C або SMBus не вдалося ініціалізувати.</p><p><b>Модулі RGB DRAM, RGB-освітлення на деяких материнських платах та RGB-відеокарти не будуть доступні в OpenRGB</b> без I2C або SMBus.</p><h4>Як це виправити:</h4><p>У Windows це зазвичай викликається не вдалою завантаження драйвера PawnIO.</p><p>Спочатку встановіть <a href='https://pawnio.eu/'>PawnIO</a>, потім відкрийте OpenRGB з правами адміністратора, щоб отримати доступ до цих пристроїв.</p><p>Дивіться <a href='https://help.openrgb.org/'>help.openrgb.org</a> для додаткових кроків усунення неполадок, якщо ви продовжуватимете бачити це повідомлення.<br></p><h3>Якщо ви не використовуєте внутрішнє RGB на робочому столі, це повідомлення не є важливим для вас.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Деякі вбудовані пристрої можуть не бути виявлені:</h2><p>Один або декілька інтерфейсів I2C або SMBus не вдалося ініціалізувати.</p><p><b>Модулі RGB DRAM, вбудоване RGB підсвічування деяких материнських плат та RGB відеокарти</b> не будуть доступні в OpenRGB без I2C або SMBus.</p><h4>Як це виправити:</h4><p>На Linux це зазвичай пов’язано з тим, що модуль i2c-dev не завантажено.</p><p>Вам потрібно завантажити модуль i2c-dev разом із відповідним драйвером i2c для вашої материнської плати. Зазвичай це i2c-piix4 для систем AMD та i2c-i801 для систем Intel.</p><p>Дивіться <a href='https://help.openrgb.org/'>help.openrgb.org</a> для додаткових кроків усунення неполадок, якщо це повідомлення з’являється повторно.<br></p><h3>Якщо ви не використовуєте вбудоване RGB на десктопі, це повідомлення для вас не є важливим.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>ПОПЕРЕДЖЕННЯ:</h2><p>Правила udev для OpenRGB не встановлено.</p><p>Більшість пристроїв не будуть доступні, якщо OpenRGB не запущено від імені root.</p><p>Якщо ви використовуєте AppImage, Flatpak або скомпільовану версію OpenRGB, вам потрібно встановити правила udev вручну.</p><p>Дивіться <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> для установки правил udev вручну.</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ПОПЕРЕДЖЕННЯ:</h2><p>Встановлено декілька файлів правил udev для OpenRGB.</p><p>Файл правил 60-openrgb.rules знаходиться як у /etc/udev/rules.d, так і в /usr/lib/udev/rules.d.</p><p>Наявність декількох файлів може спричиняти конфлікти, тому рекомендовано видалити один з них.</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Попередження:</h2><p>Один або кілька інтерфейсів I2C/SMBus не вдалося ініціалізувати.</p><p>Залежно від того, які інтерфейси не вдалося ініціалізувати, деякі модулі RGB DRAM, деяке RGB-освітлення на материнських платах та RGB-відеокарти можуть бути недоступні в OpenRGB.</p><p>У Windows це зазвичай викликається невдалим завантаженням драйвера PawnIO.</p><p>Щоб OpenRGB міг отримувати доступ до цих пристроїв, ви повинні встановити PawnIO з <a href='https://pawnio.eu/'>https://pawnio.eu</a> і запустити OpenRGB як адміністратора або як системний сервіс.</p><p>Якщо ви не використовуєте жоден з перелічених вище пристроїв, ви можете безпечно ігнорувати це повідомлення.</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>Попередження:</h2><p>Один або кілька інтерфейсів I2C/SMBus не вдалося ініціалізувати.</p><p>Залежно від того, які інтерфейси не вдалося ініціалізувати, деякі модулі RGB DRAM, деяке RGB-освітлення на материнських платах і графічні карти RGB можуть бути недоступні в OpenRGB.</p><p>У Linux це зазвичай відбувається тому, що модуль i2c-dev не завантажений.</p><p>Щоб OpenRGB міг отримати доступ до цих пристроїв, ви повинні завантажити модуль i2c-dev разом із відповідним модулем драйвера I2C для вашої материнської плати. Це зазвичай i2c-piix4 для систем на базі AMD і i2c-i801 для систем на базі Intel.</p><p>Якщо ви не використовуєте жоден з перелічених вище пристроїв, ви можете безпечно ігнорувати це повідомлення. - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>Попередження:</h2><p>Правила udev для OpenRGB не встановлено.</p><p>Більшість пристроїв не будуть доступні, якщо запускати OpenRGB не як користувача root.</p><p>Якщо використовуєте AppImage, Flatpak або самостійно скомпільовані версії OpenRGB, ви повинні встановити правила udev вручну.</p><p>Див. <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> для встановлення правил udev вручну.</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>Попередження:</h2><p>Правила udev для OpenRGB не встановлено.</p><p>Більшість пристроїв не будуть доступні, якщо не запускати OpenRGB як системний сервіс або як користувача root.</p><p>Якщо використовуєте AppImage, Flatpak або самостійно скомпільовані версії OpenRGB, ви повинні встановити правила udev вручну.</p><p>Див. <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a>, щоб встановити правила udev вручну.</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>Попередження:</h2><p>Встановлено кілька правил udev для OpenRGB.</p><p>Файл правил udev 60-openrgb.rules встановлено в обох /etc/udev/rules.d і /usr/lib/udev/rules.d.</p><p>Кілька файлів правил udev можуть конфлікувати, рекомендується видалити один з них.</p> @@ -363,7 +347,7 @@ QMK (VialRGB протокол) - + Serial Device Послідовний пристрій @@ -499,60 +483,19 @@ Зберегти підключення - + Rescan Devices Оновити список пристроїв - + Disconnect Роз'єднати - - - OpenRGBDMXSettingsEntry - Brightness Channel: - Канал яскравості: - - - Blue Channel: - Канал синього кольору: - - - Name: - Назва: - - - Green Channel: - Канал зеленого кольору: - - - Red Channel: - Канал червоного кольору: - - - Keepalive Time: - Таймаут: - - - Port: - Порт: - - - - OpenRGBDMXSettingsPage - - Add - Додати - - - Remove - Видалити - - - Save - Зберегти + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB працює в локальному режимі клієнта. Локальне з'єднання може не відключатися. @@ -564,44 +507,64 @@ + Device Configuration + Налаштування пристрою + + + + Device Name: + Назва пристрою: + + + Device-Specific Configuration Конфігурація, специфічна для пристрою + + + Reset Device Configuration + Скинути налаштування пристрою + OpenRGBDeviceInfoPage - + Name: Назва: - + Vendor: Виробник: - + Type: Тип: - + + Display Name: + Назва пристрою: + + + Description: Опис: - + Version: Версія: - + Location: Розташування: - + Serial: Серійний номер: @@ -709,7 +672,7 @@ V: - + Edit Zone Редагувати зону @@ -730,118 +693,138 @@ - + Save To Device Зберегти на пристрої - + Set individual LEDs to static colors. Safe for use with software-driven effects. Встановлює статичний колір для кожного світлодіода. Безпечний для використання з програмними ефектами. - + Set individual LEDs to static colors. Not safe for use with software-driven effects. Встановлює статичний колір для кожного світлодіода. Небезпечний для використання з програмними ефектами. - + Sets the entire device or a zone to a single color. Задає один колір для всього пристрою чи зони. - + Gradually fades between fully off and fully on. Поступово переходить між повним вимкненням та увімкненням. - + Abruptly changes between fully off and fully on. Різко змінює стан між повним вимкненням та увімкненням. - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. Повільно змінює кольори у всьому спектрі. Усі світлодіоди пристрою мають однаковий колір. - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. Повільно змінює кольори у всьому спектрі. Створює рухому веселку. - + Flashes lights when keys or buttons are pressed. Світлодіоди блимуть при натисканні клавіш чи кнопок. - - + + Entire Device Весь пристрій - + Edit Device - + Редагувати пристрій - + Entire Zone Вся зона - + Entire Segment Весь сегмент - + Left Вліво - + Right Вправо - + Up Вгору - + Down Донизу - + Horizontal Горизонтально - + Vertical Вертикально - - Saved To Device - Збережено на пристрої + + Up-Left + - + + Up-Right + Вгору-вліво + + + + Down-Left + Праворуч-вгору + + + + Down-Right + Вниз-Ліво + + + + Saved To Device + Право-вниз + + + Saving Not Supported Збереження не підтримується - + All Zones Всі зони - + Mode Specific Специфічно для режиму @@ -880,7 +863,8 @@ - + + Rescan Devices Оновити список пристроїв @@ -893,14 +877,10 @@ - + Delete Profile Видалити профіль - - Load Profile - Завантажити профіль - OpenRGB is detecting devices... @@ -922,167 +902,127 @@ Зберегти профіль з іншим ім'ям - + + Show/Hide Показати/Сховати - + + Profiles Профілі - + + Quick Colors Палітра - + + Red Червоний - + + Yellow Жовтий - + + Green Зелений - + + Cyan Бірюзовий - + + Blue Синій - + + Magenta Ліловий - + + White Білий - + + Lights Off Вимкнути - + + Exit Вихід - + Plugins Плагіни - + About OpenRGB Про OpenRGB - + Manually Added Devices Пристрої, додані вручну - Software - Програма - - - + Supported Devices Підтримувані пристрої - + General Settings Загальні налаштування - DMX Devices - DMX пристрої - - - E1.31 Devices - Пристрої E1.31 - - - Kasa Smart Devices - Пристрої Kasa Smart - - - Philips Hue Devices - Пристрої Philips Hue - - - Philips Wiz Devices - Пристрої Philips Wiz - - - OpenRGB QMK Protocol - Протокол OpenRGB QMK - - - Serial Devices - Пристрої послідовного порту - - - Yeelight Devices - Пристрої Yeelight - - - + SMBus Tools Інструменти SMBus - + SDK Client SDK клієнт - + SDK Server SDK сервер - + Do you really want to delete this profile? Ви дійсно хочете видалити цей профіль? - + Log Console Консоль логів - - LIFX Devices - Пристрої LIFX - - - Nanoleaf Devices - Пристрої Nanoleaf - - - Elgato KeyLight Devices - Пристрої Elgato KeyLight - - - Elgato LightStrip Devices - Пристрої Elgato LightStrip - OpenRGBDynamicSettingsWidget @@ -1097,182 +1037,6 @@ Визначається ОС - - OpenRGBE131SettingsEntry - - Start Channel: - Початковий канал: - - - Number of LEDs: - Кількість світлодіодів: - - - Start Universe: - Початкова всесвіт: - - - Name: - Назва: - - - Matrix Order: - Порядок матриці: - - - Matrix Height: - Висота матриці: - - - Matrix Width: - Ширина матриці: - - - Type: - Тип: - - - IP (Unicast): - IP (одноадресний): - - - Universe Size: - Розмір всесвіту: - - - Keepalive Time: - Таймаут: - - - RGB Order: - Порядок RGB: - - - Single - Однорідна область - - - Linear - Лінійна область - - - Matrix - Матриця - - - Horizontal Top Left - Горизонтально, зверху зліва направо - - - Horizontal Top Right - Горизонтально, зверху справа наліво - - - Horizontal Bottom Left - Горизонтально, знизу зліва направо - - - Horizontal Bottom Right - Горизонтально, знизу справа наліво - - - Vertical Top Left - Вертикально, зверху зліва направо - - - Vertical Top Right - Вертикально, зверху справа наліво - - - Vertical Bottom Left - Вертикально, знизу зліва направо - - - Vertical Bottom Right - Вертикально, знизу справа наліво - - - - OpenRGBE131SettingsPage - - Add - Додати - - - Remove - Видалити - - - Save - Зберегти - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - Додати - - - Remove - Видалити - - - Save - Зберегти - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP: - - - - OpenRGBElgatoLightStripSettingsPage - - Add - Додати - - - Remove - Видалити - - - Save - Зберегти - - - - OpenRGBGoveeSettingsEntry - - IP: - IP: - - - - OpenRGBGoveeSettingsPage - - Add - Додати - - - Remove - Видалити - - - Save - Зберегти - - OpenRGBHardwareIDsDialog @@ -1301,58 +1065,6 @@ Виробник - - OpenRGBKasaSmartSettingsEntry - - IP: - IP: - - - Name - Назва - - - - OpenRGBKasaSmartSettingsPage - - Add - Додати - - - Remove - Видалити - - - Save - Зберегти - - - - OpenRGBLIFXSettingsEntry - - IP: - IP: - - - Name - Назва - - - - OpenRGBLIFXSettingsPage - - Add - Додати - - - Remove - Видалити - - - Save - Зберегти - - OpenRGBLogConsolePage @@ -1389,155 +1101,6 @@ Ширина: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - Додати пристрій Nanoleaf - - - IP address: - IP: - - - Port: - Порт: - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP: - - - Port: - Порт: - - - Auth Key: - Ключ авторизації: - - - Unpair - Роз'єднати - - - Pair - Пов'язати - - - - OpenRGBNanoleafSettingsPage - - Add - Додати - - - Remove - Видалити - - - Scan - Сканувати - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - Для виконання сполучення, утримуйте кнопку включення/вимикання протягом 5-7 секунд, поки світлодіод не почне блимати, а потім протягом 30 секунд натисніть кнопку «Пов'язати». - - - - OpenRGBPhilipsHueSettingsEntry - - IP: - IP: - - - Entertainment Mode: - Розважальний режим: - - - Username: - Ім’я користувача: - - - Client Key: - Ключ клієнта: - - - Unpair Bridge - Розірвати міст - - - MAC: - MAC: - - - Auto Connect Group: - Автоматично підключатися до цієї групи: - - - - OpenRGBPhilipsHueSettingsPage - - Remove - Видалити - - - Add - Додати - - - Save - Зберегти - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - Після додавання пристроїв Hue та збереження, перезапустіть OpenRGB, а потім натисніть кнопку Sync на мосту Hue для встановлення зв’язку. - - - - OpenRGBPhilipsWizSettingsEntry - - Use Cool White - Холодний білий - - - Use Warm White - Теплий білий - - - IP: - IP: - - - White Strategy: - Розрахунок білого: - - - Average - За середнім - - - Minimum - За мінімальним - - - - OpenRGBPhilipsWizSettingsPage - - Add - Додати - - - Remove - Видалити - - - Save - Зберегти - - OpenRGBPluginsEntry @@ -1560,10 +1123,6 @@ API Version: Версія API: - - API Version Value - API Version Value - URL: @@ -1594,7 +1153,7 @@ - + Remove Plugin Видалити плагін @@ -1604,37 +1163,37 @@ <html><head/><body>Шукаєте плагіни? Перегляньте офіційний список на <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin Встановити плагін OpenRGB - + Plugin files (*.dll *.dylib *.so *.so.*) Файли плагінів (*.dll *.dylib *.so *.so.*) - + Replace Plugin Замінити плагін - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? Плагін з такою назвою вже встановлено. Ви впевнені, що хочете його замінити? - + Are you sure you want to remove this plugin? Видалити цей плагін? - + Restart Needed Потрібен перезапуск - + The plugin will be fully removed after restarting OpenRGB. Плагін буде повністю видалено після перезапуску OpenRGB. @@ -1701,14 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - Назва профілю - - - Save to an existing profile: - Записати в існуючий профіль: - Profile Selection @@ -1725,36 +1276,6 @@ Створити новий профіль: - - OpenRGBQMKORGBSettingsEntry - - Name: - Назва: - - - USB PID: - USB PID: - - - USB VID: - USB VID: - - - - OpenRGBQMKORGBSettingsPage - - Add - Додати - - - Remove - Видалити - - - Save - Зберегти - - OpenRGBSegmentExportDialog @@ -1783,44 +1304,6 @@ Назва пристрою (необов'язково): - - OpenRGBSerialSettingsEntry - - Baud: - Бод: - - - Name: - Назва: - - - Number of LEDs: - Кількість світлодіодів: - - - Port: - Порт: - - - Protocol: - Протокол: - - - - OpenRGBSerialSettingsPage - - Add - Додати - - - Remove - Видалити - - - Save - Зберегти - - OpenRGBServerInfoPage @@ -1950,14 +1433,6 @@ Website: Веб-сайт: - - <a href="https://openrgb.org">https://openrgb.org</a> - <a href="https://openrgb.org">https://openrgb.org</a> - - - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - <a href="https://gitlab.com/CalcProgrammer1/OpenRGB">https://gitlab.com/CalcProgrammer1/OpenRGB</a> - Qt Version: @@ -2054,10 +1529,6 @@ Address: Адреса: - - Read Device - Зчитати пристрій - SMBus Dumper: @@ -2110,10 +1581,6 @@ Dump Device Отримати дамп пристрою - - SMBus Reader: - Зчитувач SMBus: - Addr: @@ -2130,58 +1597,8 @@ Розмір: - - OpenRGBYeelightSettingsEntry - - IP: - IP: - - - ? - ? - - - Music Mode: - Режим захоплення звуку: - - - Override host IP: - Вказати IP-адрес хоста: - - - Left blank for auto discovering host ip - Залиште порожнім для автоматичного визначення IP хоста - - - Choose an IP... - Обрати IP... - - - Choose the correct IP for the host - Обрати правильний IP для хоста - - - - OpenRGBYeelightSettingsPage - - Add - Додати - - - Remove - Видалити - - - Save - Зберегти - - OpenRGBZoneEditorDialog - - Resize Zone - Змінити розмір зони - Add Segment @@ -2265,14 +1682,6 @@ OpenRGBZoneInitializationDialog - - Zones Resizer - Зміна розміру зон - - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>Одна або декілька зон, що можуть змінювати розмір, не налаштовані. Зони для адресних RGB роз'ємів, розмір яких не може бути визначений автоматично, потребують ручного вводу кількості світлодіодів.</p><p>Будь ласка, введіть кількість світлодіодів для кожної зони нижче.</p><p>Для детальнішої інформації про правильний розрахунок розміру, перегляньте <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">це посилання</span></a></p></body></html> - @@ -2299,10 +1708,6 @@ Ignore Ігнорувати - - Resize the zones - Змінити розмір зон - Controller @@ -2446,25 +1851,6 @@ USB VID: - - ResourceManager - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the WinRing0 driver.</p><p>You must run OpenRGB as administrator at least once to allow WinRing0 to set up.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Деякі вбудовані пристрої можуть не бути виявлені:</h2><p>Один або декілька інтерфейсів I2C або SMBus не вдалося ініціалізувати.</p><p><b>Модулі RGB DRAM, вбудоване RGB підсвічування деяких материнських плат та RGB відеокарти</b> не будуть доступні в OpenRGB без I2C або SMBus.</p><h4>Як це виправити:</h4><p>На Windows це зазвичай спричинено помилкою завантаження драйвера WinRing0.</p><p>Вам потрібно запустити OpenRGB від імені адміністратора хоча б один раз, аби WinRing0 налаштувався.</p><p>Дивіться <a href='https://help.openrgb.org/'>help.openrgb.org</a> для додаткових кроків усунення неполадок, якщо це повідомлення з’являється повторно.<br></p><h3>Якщо ви не використовуєте вбудоване RGB на десктопі, це повідомлення для вас не є важливим.</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>Деякі вбудовані пристрої можуть не бути виявлені:</h2><p>Один або декілька інтерфейсів I2C або SMBus не вдалося ініціалізувати.</p><p><b>Модулі RGB DRAM, вбудоване RGB підсвічування деяких материнських плат та RGB відеокарти</b> не будуть доступні в OpenRGB без I2C або SMBus.</p><h4>Як це виправити:</h4><p>На Linux це зазвичай пов’язано з тим, що модуль i2c-dev не завантажено.</p><p>Вам потрібно завантажити модуль i2c-dev разом із відповідним драйвером i2c для вашої материнської плати. Зазвичай це i2c-piix4 для систем AMD та i2c-i801 для систем Intel.</p><p>Дивіться <a href='https://help.openrgb.org/'>help.openrgb.org</a> для додаткових кроків усунення неполадок, якщо це повідомлення з’являється повторно.<br></p><h3>Якщо ви не використовуєте вбудоване RGB на десктопі, це повідомлення для вас не є важливим.</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>ПОПЕРЕДЖЕННЯ:</h2><p>Правила udev для OpenRGB не встановлено.</p><p>Більшість пристроїв не будуть доступні, якщо OpenRGB не запущено від імені root.</p><p>Якщо ви використовуєте AppImage, Flatpak або скомпільовану версію OpenRGB, вам потрібно встановити правила udev вручну.</p><p>Дивіться <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> для установки правил udev вручну.</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>ПОПЕРЕДЖЕННЯ:</h2><p>Встановлено декілька файлів правил udev для OpenRGB.</p><p>Файл правил 60-openrgb.rules знаходиться як у /etc/udev/rules.d, так і в /usr/lib/udev/rules.d.</p><p>Наявність декількох файлів може спричиняти конфлікти, тому рекомендовано видалити один з них.</p> - - SerialSettingsEntry @@ -2498,7 +1884,7 @@ Порт: - + No serial ports found Не знайдено послідовних портів @@ -2506,353 +1892,285 @@ Settings - + Load Window Geometry Завантажувати геометрію вікна - 90000 - 90000 - - - + Run Zone Checks on Rescan Перевіряти зони при повторному скануванні - Start Server - Запускати сервер - - - + Show LED View by Default Показувати перегляд LED за замовчуванням - Set Profile on Suspend - Встановити профіль при переході в режим сну - - - + Start Minimized Запускати у згорнутому вигляді - User Interface Settings: - Налаштування параметрів інтерфейсу: - - - Set Profile on Resume - Встановити профіль при пробудженні - - - + Start at Login Запускати при вході в систему - + HID Safe Mode Режим безпеки HID - + Use an alternate method for detecting HID devices Використовувати альтернативний метод для виявлення пристроїв HID - + Initial Detection Delay (ms) Затримка початкового виявлення (мс) - + Amount of time, in milliseconds, to wait before detecting devices when started Кількість часу в мілісекундах, яку потрібно чекати перед виявленням пристроїв після запуску - + Detection Виявлення - + Enable Log File Увімкнути логування - + Log Level Рівень логування - + Log File Count Limit Обмеження кількості файлів журналу - + Maximum number of log files to keep, 0 for no limit Максимальна кількість файлів журналу, які потрібно зберігати, 0 для відсутності обмеження - + Log Manager Менеджер журналів - + Serve All Controllers Служити всім контролерам - + Include controllers provided by client connections and plugins Включати контролери, надані клієнтськими з'єднаннями та плагінами - + Default Host Звичайний хост - + Default Port Загальний порт - + Legacy Workaround Застарілий обхід - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets Обхідний шлях для деяких старих реалізацій SDK, які відправляли неправильний розмір пакета для певних пакетів - + Server Сервер - + Minimize on Close Згортати замість закриття - + Select #BBGGRR or #RRGGBB format for hex display and input Виберіть формат #BBGGRR або #RRGGBB для шістнадцяткового відображення та введення - + Compact Tabs Компактні вкладки - + Display sidebar tabs as icons only Відображати вкладки бічної панелі лише як іконки - + Tabs on Top Вкладки зверху - + Display tabs on top instead of on the left Відображати вкладки зверху замість зліва - + Numerical Labels Числові мітки - + Display numerical labels for otherwise non-labeled LEDs in the LED view Показувати числові мітки для LED-ів, які інакше не мають міток, у перегляді LED - + Window Geometry Геометрія вікна - + Save on Exit Зберігати розміри вікна при закритті - + Drivers Драйвери - Start Client - Запускати клієнт - - - Load Profile - Встановити профіль при запуску - - - Set Server Port - Встановити порт для сервера - - - + Enable Log Console Увімкнути консоль логів - + Custom Arguments Параметри командного рядка при автоматичному запуску - Log Manager Settings: - Налаштування параметрів логів: - - - Start at Login Status - Статус автозапуску при вході в систему - - - Start at Login Settings: - Налаштування запуску при вході в систему: - - - Open Settings Folder - Відкрити папку налаштувань - - - Drivers Settings - Налаштування драйверів - - - + Monochrome Tray Icon Відображення значка у системному лотку в відтінках сірого - + Save window geometry on exit Зберігати геометрію вікна при виході - + X X - + Y Y - + Width Ширина - + Height Висота - + User Interface Інтерфейс користувача - + SMBus Sleep Mode (restart required) Режим сну SMBus (потрібно перезавантаження) - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus: зменшити навантаження на ЦП (потрібен перезапуск) - + Disable Key Expansion Відключити розширення клавіш у перегляді пристроїв - + Enable Start at Login Увімкнути запуск при вході - + Start OpenRGB on login Запускати OpenRGB при вході - + Start minimized to the system tray Запускати у мінімізованому вигляді у панель завдань системи - + Additional command line arguments to pass to OpenRGB when starting on login Додаткові аргументи командного рядка, які слід передати OpenRGB при запуску під час входу - + Language for the user interface Мова для користувальницького інтерфейсу - + Keep OpenRGB active in the system tray when closing the main window Зберігати OpenRGB активним у системному лотку при закритті головного вікна - + Use a monochrome icon in the system tray instead of a full color icon Використовувати монохромну іконку в системному лотку замість повнокольорової іконки - + Hex Format Формат шістнадцяткових чисел (HEX) - Set Profile on Exit - Встановити профіль при закритті програми - - - + Shared SMBus Access (restart required) Спільний доступ до SMBus (потрібен перезапуск) - Set Server Host - Приймати підключення до сервера лише на заданій IP-адресі - - - + Language Мова - - A problem occurred enabling Start at Login. - Сталася помилка при увімкненні автозапуску. - English - US Українська - - System Default - Визначається ОС - Load Profile on Exit @@ -2885,16 +2203,36 @@ + Load Profile on Service Shutdown + Завантажити профіль при вимкненні служби + + + + Profile to load when the OpenRGB background service shuts down + Профіль, який завантажувати, коли фоновий сервіс OpenRGB вимикається + + + + Load Profile on Service Startup + Завантажити профіль при запуску служби + + + + Profile to load when the OpenRGB background service starts up + Профіль, який завантажувати, коли сервіс фону OpenRGB запускається + + + Load Profile on Suspend Завантажити профіль при призупиненні - + Profile to load before system enters sleep mode Профіль, який завантажити перед тим, як система ввійде в режим сну - + Profile Manager Менеджер профілів diff --git a/qt/i18n/OpenRGB_zh_CN.ts b/qt/i18n/OpenRGB_zh_CN.ts index bd084fd49..c5a289209 100644 --- a/qt/i18n/OpenRGB_zh_CN.ts +++ b/qt/i18n/OpenRGB_zh_CN.ts @@ -92,7 +92,7 @@ 端口： - + No serial ports found 未找到串行端口 @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>某些内部设备可能无法被检测到：</h2><p>一个或多个I2C或SMBus接口未能初始化。</p><p><b>如果没有I2C或SMBus，RGB DRAM模块、某些主板的板载RGB照明以及RGB显卡将无法在OpenRGB中使用。</b></p><h4>如何解决此问题：</h4><p>在Windows上，这通常是由无法加载PawnIO驱动程序引起的。</p><p>您必须首先安装 <a href='https://pawnio.eu/'>PawnIO</a>，然后以管理员身份运行OpenRGB，以便访问这些设备。</p><p>如果您继续看到此消息，请参阅 <a href='https://help.openrgb.org/'>help.openrgb.org</a> 以获取更多故障排除步骤。<br></p><h3>如果您在台式机上不使用内部RGB，此消息对您不重要。</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>部分内部设备可能未被检测到：</h2><p>一个或多个 I2C 或 SMBus 接口未能成功初始化。</p><p><b>RGB 内存模块、部分主板的内置 RGB 灯珠及 RGB 显卡</b>在没有 I2C 或 SMBus 支持的情况下，将无法在 OpenRGB 中使用</p><h4>解决方法：</h4><p>在 Linux 系统中，此问题通常由 i2c-dev 模块未被加载引起。</p><p>您必须加载 i2c-dev 模块，并确保加载了适用于您的主板的正确 I2C 驱动程序。对于 AMD 系统，通常为 i2c-piix4；而对于 Intel 系统，则为 i2c-i801。</p><p>如果您持续遇到此提示，请参考 <a href='https://help.openrgb.org/'>help.openrgb.org</a> 提供的其他故障排除步骤。<br></p><h3>如果您未使用台式机中内置的 RGB，那么本提示对您来说并不重要。</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>警告：</h2><p>OpenRGB 的 udev 规则未安装。</p><p>除非以 root 身份运行 OpenRGB，否则大多数设备将不可用。</p><p>如果使用 AppImage、Flatpak 或自行编译的 OpenRGB 版本，必须手动安装 udev 规则。</p><p>请参阅 <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> 手动安装 udev 规则。</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>警告：</h2><p>多个 OpenRGB udev 规则已被安装。</p><p>udev 规则文件 60-openrgb.rules 同时存在于 /etc/udev/rules.d 和 /usr/lib/udev/rules.d 目录中。</p><p>多个 udev 规则文件可能会发生冲突，建议您删除其中一个以避免潜在问题。</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>警告：</h2><p>一个或多个 I2C/SMBus 接口未能初始化。</p><p>根据哪些接口未能初始化，OpenRGB 中可能无法使用某些 RGB DRAM 模块、某些主板上的 RGB 灯光以及 RGB 显卡。</p><p>在 Windows 上，这通常是由于无法加载 PawnIO 驱动程序导致的。</p><p>为了让 OpenRGB 访问这些设备，您必须从 <a href='https://pawnio.eu/'>https://pawnio.eu</a> 安装 PawnIO，并以管理员身份或作为系统服务运行 OpenRGB。</p><p>如果您没有使用上述列出的任何设备，可以安全地忽略此消息。</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>警告：</h2><p>一个或多个 I2C/SMBus 接口未能初始化。</p><p>根据哪些接口未能初始化，OpenRGB 中可能无法使用部分 RGB DRAM 模块、部分主板的板载 RGB 灯光以及 RGB 显卡。</p><p>在 Linux 系统中，这通常是因为未加载 i2c-dev 模块。</p><p>为了让 OpenRGB 访问这些设备，您必须加载 i2c-dev 模块以及主板对应的正确 I2C 驱动模块。通常，AMD 系统使用 i2c-piix4，Intel 系统使用 i2c-i801。</p><p>如果您没有使用上述列出的任何设备，可以安全地忽略此消息。</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>警告：</h2><p>OpenRGB 的 udev 规则未安装。</p><p>除非以 root 身份运行 OpenRGB，否则大多数设备将不可用。</p><p>如果使用 AppImage、Flatpak 或自行编译的 OpenRGB 版本，必须手动安装 udev 规则。</p><p>请参阅 <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> 手动安装 udev 规则。</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>警告：</h2><p>OpenRGB 的 udev 规则未安装。</p><p>除非以系统服务或 root 身份运行 OpenRGB，否则大多数设备将不可用。</p><p>如果使用 AppImage、Flatpak 或自行编译的 OpenRGB 版本，必须手动安装 udev 规则。</p><p>请参阅 <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> 手动安装 udev 规则。</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>警告：</h2><p>已安装多个 OpenRGB udev 规则。</p><p>udev 规则文件 60-openrgb.rules 同时安装在 /etc/udev/rules.d 和 /usr/lib/udev/rules.d 中。</p><p>多个 udev 规则文件可能会发生冲突，建议删除其中一个。</p> @@ -363,7 +347,7 @@ QMK（VialRGB协议） - + Serial Device 串行设备 @@ -499,60 +483,19 @@ 保存连接 - + Rescan Devices 重新扫描设备 - + Disconnect 断开 - - - OpenRGBDMXSettingsEntry - Brightness Channel: - 亮度通道： - - - Blue Channel: - 蓝色通道： - - - Name: - 名称： - - - Green Channel: - 绿色通道： - - - Red Channel: - 红色通道： - - - Keepalive Time: - 保持活动时间： - - - Port: - 端口： - - - - OpenRGBDMXSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB处于本地客户端模式。本地连接可能无法断开。 @@ -564,44 +507,64 @@ + Device Configuration + 设备配置 + + + + Device Name: + 设备名称： + + + Device-Specific Configuration + + + Reset Device Configuration + 重置设备配置 + OpenRGBDeviceInfoPage - + Name: 名称： - + Vendor: 厂商： - + Type: 类型： - + + Display Name: + 显示名称： + + + Description: 描述： - + Version: 版本： - + Location: 位置： - + Serial: 序列号： @@ -699,7 +662,7 @@ 明度（V）： - + Edit Zone 编辑区域 @@ -720,7 +683,7 @@ - + Save To Device 保存到设备 @@ -735,113 +698,133 @@ 编辑 - + Set individual LEDs to static colors. Safe for use with software-driven effects. 将单个 LED 设置为静态颜色。 可安全地与软件驱动的效果一起使用。 - + Set individual LEDs to static colors. Not safe for use with software-driven effects. 将单个 LED 设置为静态颜色。 与软件驱动的效果一起使用不安全。 - + Sets the entire device or a zone to a single color. 将整个设备或区域设置为单一颜色。 - + Gradually fades between fully off and fully on. 在完全关闭和完全打开之间逐渐淡出。 - + Abruptly changes between fully off and fully on. 在完全关闭和完全打开之间突然变化。 - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. 在整个色谱中逐渐循环。 设备上的所有指示灯都是相同的颜色。 - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. 在整个色谱中逐渐循环。 生成移动的彩虹图案。 - + Flashes lights when keys or buttons are pressed. 按下按键或按钮时闪烁。 - - + + Entire Device 整个设备 - + Edit Device - + 编辑设备 - + Entire Zone 整个区域 - + Left 左 - + Right 右 - + Up 上 - + Down 下 - + Horizontal 水平 - + Vertical 垂直 - + + Up-Left + 左上 + + + + Up-Right + 右上 + + + + Down-Left + 左下 + + + + Down-Right + 右下 + + + Saved To Device 已保存到设备 - + Saving Not Supported 不支持保存 - + All Zones 所有区域 - + Mode Specific 特定模式 - + Entire Segment 整个区段 @@ -880,7 +863,8 @@ - + + Rescan Devices 重新扫描设备 @@ -893,14 +877,10 @@ - + Delete Profile 删除配置文件 - - Load Profile - 加载配置文件 - OpenRGB is detecting devices... @@ -922,167 +902,127 @@ 使用自定义名称保存配置文件 - + + Show/Hide 显示/隐藏 - + + Profiles 配置文件 - + + Quick Colors 快速着色 - + + Red 红色 - + + Yellow 黄色 - + + Green 绿色 - + + Cyan 青色 - + + Blue 蓝色 - + + Magenta 品红 - + + White 白色 - + + Lights Off 关灯 - + + Exit 退出 - + Plugins 插件 - + About OpenRGB 关于 OpenRGB - + Manually Added Devices 手动添加的设备 - Software - 软件 - - - + Supported Devices 兼容设备 - + General Settings 常规设置 - E1.31 Devices - E1.31 设备 - - - LIFX Devices - LIFX 设备 - - - Philips Hue Devices - 飞利浦 Hue 设备 - - - Philips Wiz Devices - 飞利浦 Wiz 设备 - - - OpenRGB QMK Protocol - OpenRGB QMK 协议 - - - Serial Devices - 串行设备 - - - Yeelight Devices - Yeelight 设备 - - - Nanoleaf Devices - Nanoleaf 设备 - - - Elgato KeyLight Devices - Elgato KeyLight 设备 - - - Elgato LightStrip Devices - Elgato LightStrip 设备 - - - + SMBus Tools SMBus 工具 - + SDK Client SDK 客户端 - + SDK Server SDK 服务器 - + Do you really want to delete this profile? 是否确定删除此配置文件？ - + Log Console 日志控制台 - - DMX Devices - DMX 设备 - - - Kasa Smart Devices - Kasa 智能设备 - OpenRGBDynamicSettingsWidget @@ -1097,182 +1037,6 @@ 系统默认 - - OpenRGBE131SettingsEntry - - Start Channel: - 启动 Channel： - - - Number of LEDs: - LED 数量： - - - Start Universe: - 启动 Universe： - - - Name: - 名称： - - - Matrix Order: - 矩阵顺序： - - - Matrix Height: - 矩阵高度： - - - Matrix Width: - 矩阵宽度： - - - Type: - 类型： - - - IP (Unicast): - IP（Unicast）： - - - Universe Size: - Universe 大小： - - - Keepalive Time: - 保持活动时间： - - - RGB Order: - RGB 顺序： - - - Single - 点 - - - Linear - 线 - - - Matrix - 面 - - - Horizontal Top Left - 水平左上角 - - - Horizontal Top Right - 水平右上角 - - - Horizontal Bottom Left - 水平左下角 - - - Horizontal Bottom Right - 水平右下角 - - - Vertical Top Left - 竖直左上角 - - - Vertical Top Right - 竖直右上角 - - - Vertical Bottom Left - 竖直左下角 - - - Vertical Bottom Right - 竖直右下角 - - - - OpenRGBE131SettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - - - OpenRGBElgatoKeyLightSettingsEntry - - IP: - IP： - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - - - OpenRGBElgatoLightStripSettingsEntry - - IP: - IP： - - - - OpenRGBElgatoLightStripSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - - - OpenRGBGoveeSettingsEntry - - IP: - IP： - - - - OpenRGBGoveeSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBHardwareIDsDialog @@ -1301,58 +1065,6 @@ 厂商 - - OpenRGBKasaSmartSettingsEntry - - IP: - IP： - - - Name - 名称 - - - - OpenRGBKasaSmartSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - - - OpenRGBLIFXSettingsEntry - - IP: - IP： - - - Name - 名称 - - - - OpenRGBLIFXSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBLogConsolePage @@ -1389,155 +1101,6 @@ 宽度: - - OpenRGBNanoleafNewDeviceDialog - - New Nanoleaf device - 新 Nanoleaf 设备 - - - IP address: - IP 地址： - - - Port: - 端口： - - - - OpenRGBNanoleafSettingsEntry - - IP: - IP： - - - Port: - 端口： - - - Auth Key: - 身份验证密钥： - - - Unpair - 取消配对 - - - Pair - 配对 - - - - OpenRGBNanoleafSettingsPage - - Scan - 扫描 - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - 配对时，请按住开关按钮 5-7 秒钟，直到 LED 开始以某种模式闪烁，然后在 30 秒内点按“配对”按钮。 - - - Add - 添加 - - - Remove - 移除 - - - - OpenRGBPhilipsHueSettingsEntry - - Entertainment Mode: - 娱乐模式： - - - Auto Connect Group: - 自动连接： - - - IP: - IP： - - - Client Key: - 客户端密钥： - - - Username: - 用户名： - - - MAC: - MAC： - - - Unpair Bridge - 未配对桥 - - - - OpenRGBPhilipsHueSettingsPage - - Remove - 移除 - - - Add - 添加 - - - Save - 保存 - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - 添加 Hue 条目并保存后，重新启动 OpenRGB，然后按 Hue 网桥上的“同步”按钮进行配对。 - - - - OpenRGBPhilipsWizSettingsEntry - - IP: - IP： - - - Use Cool White - 使用冷白色 - - - Use Warm White - 使用暖白色 - - - White Strategy: - 白色方案： - - - Average - 平均 - - - Minimum - 最小 - - - - OpenRGBPhilipsWizSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBPluginsEntry @@ -1580,10 +1143,6 @@ API Version: API 版本： - - API Version Value - API 版本值 - OpenRGBPluginsPage @@ -1594,7 +1153,7 @@ - + Remove Plugin 移除插件 @@ -1604,37 +1163,37 @@ <html><head/><body>寻找插件？请参阅官方列表 <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin 安装 OpenRGB 插件 - + Plugin files (*.dll *.dylib *.so *.so.*) 插件文件 (*.dll *.dylib *.so *.so.*) - + Replace Plugin 替换插件 - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? 已安装具有此文件名的插件。 您确定要替换此插件吗？ - + Are you sure you want to remove this plugin? 是否确定删除此插件？ - + Restart Needed 需要重新启动 - + The plugin will be fully removed after restarting OpenRGB. 重新启动 OpenRGB 后，该插件将被完全删除。 @@ -1701,14 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - 配置文件名称 - - - Save to an existing profile: - 保存到已有配置文件： - Profile Selection @@ -1725,36 +1276,6 @@ 创建新配置文件： - - OpenRGBQMKORGBSettingsEntry - - Name: - 名称： - - - USB PID: - USB PID： - - - USB VID: - USB VID： - - - - OpenRGBQMKORGBSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBSegmentExportDialog @@ -1783,44 +1304,6 @@ 设备名称（可选）： - - OpenRGBSerialSettingsEntry - - Baud: - 波特率： - - - Name: - 名称： - - - Number of LEDs: - LED数量： - - - Port: - 端口： - - - Protocol: - 协议： - - - - OpenRGBSerialSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBServerInfoPage @@ -2046,10 +1529,6 @@ Address: 地址： - - Read Device - 读取设备 - SMBus Dumper: @@ -2102,10 +1581,6 @@ Dump Device 转储设备 - - SMBus Reader: - SMBus 读卡器： - Addr: @@ -2122,58 +1597,8 @@ 大小： - - OpenRGBYeelightSettingsEntry - - IP: - IP： - - - ? - ？ - - - Music Mode: - 音乐模式： - - - Override host IP: - 覆盖主机 IP： - - - Left blank for auto discovering host ip - 留空用于自动发现主机 IP - - - Choose an IP... - 选择一个 IP... - - - Choose the correct IP for the host - 为主机选择正确的 IP - - - - OpenRGBYeelightSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBZoneEditorDialog - - Resize Zone - 调整区域大小 - Add Segment @@ -2283,18 +1708,6 @@ Ignore 忽略 - - Zones Resizer - 区域大小调整器 - - - <html><head/><body><p>One or more resizable zones have not been configured. Resizable zones are most commonly used for addressable RGB headers where the size of the connected device cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html> - <html><head/><body><p>一个或多个可调整大小的区域尚未配置。 可调整大小的区域通常用于连接设备大小无法自动检测的可寻址 RGB 接口。</p><p>请在下方输入每个区域中的 LED 数量。</p><p>有关计算正确大小的详细信息，请参考链接 <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;"> 。</span></a></p></body></html> - - - Resize the zones - 调整区域大小 - Controller @@ -2438,25 +1851,6 @@ USB VID： - - ResourceManager - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the WinRing0 driver.</p><p>You must run OpenRGB as administrator at least once to allow WinRing0 to set up.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>部分内部设备可能未被检测到：</h2><p>一个或多个 I2C 或 SMBus 接口未能成功初始化。</p><p><b>RGB 内存模块、部分主板的内置 RGB 灯珠及 RGB 显卡</b>在没有 I2C 或 SMBus 支持的情况下，将无法在 OpenRGB 中使用</p><h4>解决方法：</h4><p>在 Windows 系统中，此问题通常由 WinRing0 驱动程序未能加载引起。</p><p>您必须以管理员身份运行一次 OpenRGB，以允许 WinRing0 驱动程序进行安装配置。</p><p>如果您持续遇到此提示，请参考 <a href='https://help.openrgb.org/'>help.openrgb.org</a> 提供的其他故障排除步骤。<br></p><h3>如果您未使用台式机中内置的 RGB，那么本提示对您来说并不重要。</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>部分内部设备可能未被检测到：</h2><p>一个或多个 I2C 或 SMBus 接口未能成功初始化。</p><p><b>RGB 内存模块、部分主板的内置 RGB 灯珠及 RGB 显卡</b>在没有 I2C 或 SMBus 支持的情况下，将无法在 OpenRGB 中使用</p><h4>解决方法：</h4><p>在 Linux 系统中，此问题通常由 i2c-dev 模块未被加载引起。</p><p>您必须加载 i2c-dev 模块，并确保加载了适用于您的主板的正确 I2C 驱动程序。对于 AMD 系统，通常为 i2c-piix4；而对于 Intel 系统，则为 i2c-i801。</p><p>如果您持续遇到此提示，请参考 <a href='https://help.openrgb.org/'>help.openrgb.org</a> 提供的其他故障排除步骤。<br></p><h3>如果您未使用台式机中内置的 RGB，那么本提示对您来说并不重要。</h3> - - - <h2>WARNING:</h2><p>OpenRGB udev 规则尚未安装。</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>警告：</h2><p>The OpenRGB udev rules are not installed.</p><p>除非以 root 身份运行 OpenRGB，否则大多数设备将无法正常使用。</p><p>如果您使用的是 AppImage、Flatpak 或自行编译的 OpenRGB 版本，请务必手动安装 udev 规则。</p><p>请访问 <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> 并按照指引手动安装 udev 规则</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>警告：</h2><p>多个 OpenRGB udev 规则已被安装。</p><p>udev 规则文件 60-openrgb.rules 同时存在于 /etc/udev/rules.d 和 /usr/lib/udev/rules.d 目录中。</p><p>多个 udev 规则文件可能会发生冲突，建议您删除其中一个以避免潜在问题。</p> - - SerialSettingsEntry @@ -2490,7 +1884,7 @@ 端口： - + No serial ports found 未找到串行端口 @@ -2498,337 +1892,277 @@ Settings - + Minimize on Close 关闭窗口时最小化 - 90000 - 90000 - - - Start Server - 启动服务器 - - - + HID Safe Mode HID 安全模式 - + Use an alternate method for detecting HID devices 使用另一种方法检测HID设备 - + Initial Detection Delay (ms) 初始检测延迟 (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started 启动时等待检测设备的时间（以毫秒为单位） - + Detection 检测 - + Enable Log Console 启用日志控制台（需要重新启动） - + Log Level 日志级别 - + Log File Count Limit 日志文件数量限制 - + Maximum number of log files to keep, 0 for no limit 保留的日志文件最大数量，0 表示无限制 - + Log Manager 日志管理器 - + Serve All Controllers 为所有控制器提供服务 - + Include controllers provided by client connections and plugins 包含由客户端连接和插件提供的控制器 - + Default Host 默认主机 - + Default Port 默认端口 - + Legacy Workaround 旧版变通方法 - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets 针对某些较旧的SDK实现的变通方法，这些实现对某些数据包发送了不正确的数据包大小 - + Server 服务器 - + Custom Arguments 自定义参数 - + Numerical Labels 数字标签 - + Display numerical labels for otherwise non-labeled LEDs in the LED view 在LED视图中，为未标记的LED显示数字标签 - + Window Geometry 窗口几何 - + Save on Exit 关闭时保存窗口大小及位置 - + Load Window Geometry 加载窗口大小及位置 - Start Client - 启动客户端 - - - Start at Login Settings: - 登录启动设置： - - - Log Manager Settings: - 日志管理器设置： - - - Start at Login Status - 登录启动状态 - - - Set Profile on Exit - 退出时设置配置文件 - - - + Shared SMBus Access (restart required) 共享 SMBus 访问（需要重新启动） - Set Server Host - 设置服务器主机 - - - Set Server Port - 设置服务器端口 - - - + Language 语言 - Load Profile - 加载配置文件 - - - Drivers Settings - 驱动程序设置 - - - + Run Zone Checks on Rescan 重新扫描时运行区域检查 - User Interface Settings: - 用户界面设置： - - - + Start at Login 登录时启动 - + Start Minimized 启动时最小化 - + Save window geometry on exit 退出时保存窗口布局 - + X X - + Y Y - + Width 宽度 - + Height 高度 - + User Interface 用户界面 - + SMBus Sleep Mode (restart required) SMBus睡眠模式（需要重启） - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus：降低 CPU 使用率（需要重新启动） - + Monochrome Tray Icon 灰度托盘图标 - Open Settings Folder - 打开设置文件夹 - - - + Disable Key Expansion 在设备视图中禁用快捷键扩展 - + Hex Format HEX 格式 - + Enable Start at Login 启用登录时启动 - + Start OpenRGB on login 登录时启动 OpenRGB - + Start minimized to the system tray 启动时最小化到系统托盘 - + Additional command line arguments to pass to OpenRGB when starting on login 登录时启动 OpenRGB 时传递的附加命令行参数 - + Language for the user interface 用户界面的语言 - + Keep OpenRGB active in the system tray when closing the main window 关闭主窗口时在系统托盘中保持 OpenRGB 活动 - + Use a monochrome icon in the system tray instead of a full color icon 在系统托盘中使用单色图标，而不是全彩色图标 - + Select #BBGGRR or #RRGGBB format for hex display and input 选择 #BBGGRR 或 #RRGGBB 格式用于十六进制显示和输入 - + Compact Tabs 紧凑标签页 - + Display sidebar tabs as icons only 仅以图标形式显示侧边栏标签 - + Tabs on Top 标签在顶部 - + Display tabs on top instead of on the left 将标签页显示在顶部而不是左侧 - + Show LED View by Default 默认显示 LED 视图 - + Drivers 驱动程序 - Set Profile on Suspend - 睡眠时设置配置文件 - - - Set Profile on Resume - 唤醒时设置配置文件 - - - + Enable Log File 启用日志文件（需要重新启动） @@ -2837,14 +2171,6 @@ English - US 简体中文 - - System Default - 系统默认 - - - A problem occurred enabling Start at Login. - 启用“登录时启动”时出现问题。 - Load Profile on Exit @@ -2877,16 +2203,36 @@ + Load Profile on Service Shutdown + 服务关闭时加载配置文件 + + + + Profile to load when the OpenRGB background service shuts down + 关闭 OpenRGB 后台服务时加载的配置文件 + + + + Load Profile on Service Startup + 服务启动时加载配置文件 + + + + Profile to load when the OpenRGB background service starts up + 启动 OpenRGB 后台服务时加载的配置文件 + + + Load Profile on Suspend 在挂起时加载配置文件 - + Profile to load before system enters sleep mode 在系统进入睡眠模式之前加载的配置文件 - + Profile Manager 配置文件管理器 diff --git a/qt/i18n/OpenRGB_zh_TW.ts b/qt/i18n/OpenRGB_zh_TW.ts index 0a431ad28..24e92646f 100644 --- a/qt/i18n/OpenRGB_zh_TW.ts +++ b/qt/i18n/OpenRGB_zh_TW.ts @@ -92,7 +92,7 @@ 埠： - + No serial ports found 未找到串行端口 @@ -158,38 +158,22 @@ DetectionManager - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>You must first install <a href='https://pawnio.eu/'>PawnIO</a>, then you must OpenRGB as administrator in order to access these devices.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>某些内部设备可能无法被检测到：</h2><p>一个或多个I2C或SMBus接口未能初始化。</p><p><b>如果没有I2C或SMBus，RGB DRAM模块、某些主板的板载RGB照明以及RGB显卡将无法在OpenRGB中使用。</b></p><h4>如何解决此问题：</h4><p>在Windows上，这通常是由无法加载PawnIO驱动程序引起的。</p><p>您必须首先安装 <a href='https://pawnio.eu/'>PawnIO</a>，然后以管理员身份运行OpenRGB，以便访问这些设备。</p><p>如果您继续看到此消息，请参阅 <a href='https://help.openrgb.org/'>help.openrgb.org</a> 以获取更多故障排除步骤。<br></p><h3>如果您在台式机上不使用内部RGB，此消息对您不重要。</h3> - - - <h2>Some internal devices may not be detected:</h2><p>One or more I2C or SMBus interfaces failed to initialize.</p><p><b>RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB Graphics Cards, will not be available in OpenRGB</b> without I2C or SMBus.</p><h4>How to fix this:</h4><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p><h3>If you are not using internal RGB on a desktop this message is not important to you.</h3> - <h2>某些内部设备可能无法被检测到：</h2><p>一个或多个I2C或SMBus接口初始化失败。</p><p><b>如果没有I2C或SMBus，RGB DRAM模块、某些主板的板载RGB照明以及RGB显卡将无法在OpenRGB中使用。</b></p><h4>如何解决此问题：</h4><p>在Linux系统上，这通常是因为未加载i2c-dev模块。</p><p>您必须加载i2c-dev模块，并加载主板对应的正确I2C驱动程序。通常，AMD系统使用i2c-piix4，Intel系统使用i2c-i801。</p><p>如果您持续看到此消息，请访问<a href='https://help.openrgb.org/'>help.openrgb.org</a>查看额外的故障排除步骤。<br></p><h3>如果您在台式机上不使用内部RGB，此消息对您不重要。</h3> - - - <h2>WARNING:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>警告：</h2><p>OpenRGB 的 udev 规则未安装。</p><p>除非以 root 身份运行 OpenRGB，否则大多数设备将不可用。</p><p>如果使用 AppImage、Flatpak 或自行编译的 OpenRGB 版本，必须手动安装 udev 规则。</p><p>请参阅 <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> 手动安装 udev 规则。</p> - - - <h2>WARNING:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> - <h2>警告：</h2><p>已安装多个 OpenRGB udev 规则。</p><p>udev 规则文件 60-openrgb.rules 同时安装在 /etc/udev/rules.d 和 /usr/lib/udev/rules.d 中。</p><p>多个 udev 规则文件可能会发生冲突，建议删除其中一个。</p> - - - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>警告：</h2><p>一个或多个 I2C/SMBus 接口未能初始化。</p><p>根据未能初始化的接口，OpenRGB 中可能无法使用某些 RGB DRAM 模块、某些主板上的 RGB 灯光以及 RGB 显卡。</p><p>在 Windows 上，这通常是由于无法加载 PawnIO 驱动程序导致的。</p><p>为了使 OpenRGB 能够访问这些设备，您必须从 <a href='https://pawnio.eu/'>https://pawnio.eu</a> 安装 PawnIO，并以管理员身份或作为系统服务运行 OpenRGB。</p><p>如果您没有使用上述列出的任何设备，可以安全地忽略此消息。</p> - + <h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p> <h2>警告：</h2><p>一个或多个 I2C/SMBus 接口未能初始化。</p><p>根据哪些接口未能初始化，OpenRGB 中可能无法使用部分 RGB DRAM 模块、部分主板的板载 RGB 灯光以及 RGB 显卡。</p><p>在 Linux 系统中，这通常是因为未加载 i2c-dev 模块。</p><p>为了让 OpenRGB 访问这些设备，您必须加载 i2c-dev 模块以及主板对应的正确 I2C 驱动模块。通常，AMD 系统使用 i2c-piix4，Intel 系统使用 i2c-i801。</p><p>如果您没有使用上述列出的任何设备，可以安全地忽略此消息。</p> - - <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> - <h2>警告：</h2><p>OpenRGB 的 udev 规则未安装。</p><p>除非以 root 身份运行 OpenRGB，否则大多数设备将不可用。</p><p>如果使用 AppImage、Flatpak 或自行编译的 OpenRGB 版本，必须手动安装 udev 规则。</p><p>请参阅 <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> 手动安装 udev 规则。</p> + + <h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p> + <h2>警告：</h2><p>OpenRGB 的 udev 规则未安装。</p><p>除非以系统服务或 root 身份运行 OpenRGB，否则大多数设备将不可用。</p><p>如果使用 AppImage、Flatpak 或自行编译的 OpenRGB 版本，必须手动安装 udev 规则。</p><p>请参阅 <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> 手动安装 udev 规则。</p> - + <h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p> <h2>警告：</h2><p>已安装多个 OpenRGB udev 规则。</p><p>udev 规则文件 60-openrgb.rules 同时安装在 /etc/udev/rules.d 和 /usr/lib/udev/rules.d 中。</p><p>多个 udev 规则文件可能会发生冲突，建议删除其中一个。</p> @@ -363,7 +347,7 @@ QMK（VialRGB协议） - + Serial Device 串行设备 @@ -499,44 +483,19 @@ 保存連接 - + Rescan Devices 重新掃描設備 - + Disconnect 斷開 - - - OpenRGBDMXSettingsEntry - Name: - 名稱： - - - Keepalive Time: - 保持活動時間： - - - Port: - 埠： - - - - OpenRGBDMXSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 + + OpenRGB is in local client mode. The local connection may not be disconnected. + OpenRGB处于本地客户端模式。本地连接可能无法断开。 @@ -548,44 +507,64 @@ + Device Configuration + 设备配置 + + + + Device Name: + 设备名称： + + + Device-Specific Configuration + + + Reset Device Configuration + 重置设备配置 + OpenRGBDeviceInfoPage - + Name: 名稱： - + Vendor: 供應商： - + Type: 類型： - + + Display Name: + 显示名称： + + + Description: 描述： - + Version: 版本： - + Location: 位置： - + Serial: 序號： @@ -660,12 +639,12 @@ Edit - + Zone: - 區域： + 编辑 @@ -688,7 +667,7 @@ 明度（V）： - + Edit Zone 编辑区域 @@ -709,7 +688,7 @@ - + Save To Device 保存到設備 @@ -719,113 +698,133 @@ 十六进制： - + Set individual LEDs to static colors. Safe for use with software-driven effects. 將單個 LED 設置為靜態顏色。 可安全使用軟體驅動效果。 - + Set individual LEDs to static colors. Not safe for use with software-driven effects. 將單個 LED 設置為靜態顏色。 與軟體驅動的效果一起使用不安全。 - + Sets the entire device or a zone to a single color. 將整個設備或區域設置為單一顏色。 - + Gradually fades between fully off and fully on. 在完全關閉和完全打開之間逐漸淡出。 - + Abruptly changes between fully off and fully on. 在完全關閉和完全打開之間突然變化。 - + Gradually cycles through the entire color spectrum. All lights on the device are the same color. 在整個色譜中逐漸循環。 設備上的所有指示燈都是相同的顏色。 - + Gradually cycles through the entire color spectrum. Produces a rainbow pattern that moves. 在整個色譜中逐漸循環。 生成移動的彩虹圖案。 - + Flashes lights when keys or buttons are pressed. 按下按鍵或按鈕時閃爍。 - - + + Entire Device 整個設備 - + Edit Device - + 编辑设备 - + Entire Zone 整個區域 - + Left 左 - + Right 右 - + Up 上 - + Down 下 - + Horizontal 水平 - + Vertical 垂直 - + + Up-Left + 左上 + + + + Up-Right + 右上 + + + + Down-Left + 左下 + + + + Down-Right + 右下 + + + Saved To Device 保存到設備 - + Saving Not Supported 不支持保存 - + All Zones 所有區域 - + Mode Specific 特定模式 - + Entire Segment 整个段 @@ -864,7 +863,8 @@ - + + Rescan Devices 重新掃描設備 @@ -877,14 +877,10 @@ - + Delete Profile 刪除配置文件 - - Load Profile - 載入配置文件 - OpenRGB is detecting devices... @@ -906,156 +902,124 @@ 使用自訂名稱保存配置文件 - + + Show/Hide 顯示/隱藏 - + + Profiles 配置文件 - + + Quick Colors 快速著色 - + + Red 紅色 - + + Yellow 黃色 - + + Green 綠色 - + + Cyan 青色 - + + Blue 藍色 - + + Magenta 品紅 - + + White 白 - + + Lights Off 關燈 - + + Exit 退出 - + Plugins 插件 - + About OpenRGB 关于 OpenRGB - + Manually Added Devices 手动添加的设备 - Software - 軟體 - - - + Supported Devices 相容設備選擇 - + General Settings 常規設置 - E1.31 Devices - E1.31 設備 - - - LIFX Devices - LIFX 設備 - - - Philips Hue Devices - 飛利浦 Hue 設備 - - - Philips Wiz Devices - 飛利浦 Wiz 設備 - - - OpenRGB QMK Protocol - OpenRGB QMK 協議 - - - Serial Devices - 串列設備 - - - Yeelight Devices - Yeelight 設備 - - - Nanoleaf Devices - 綠諾設備 - - - Elgato KeyLight Devices - Elgato KeyLight 設備 - - - Elgato LightStrip Devices - Elgato 燈條設備 - - - + SMBus Tools SMBus 工具 - + SDK Client SDK 用戶端 - + SDK Server SDK 伺服器 - + Do you really want to delete this profile? 是否確定刪除此配置文件？ - + Log Console 日誌控制台 @@ -1073,157 +1037,6 @@ 系統默認 - - OpenRGBE131SettingsEntry - - Start Channel: - 啟動頻道： - - - Number of LEDs: - LED數量： - - - Start Universe: - 開啟Universe: - - - Name: - 名稱： - - - Matrix Order: - 矩陣順序： - - - Matrix Height: - 矩陣高度： - - - Matrix Width: - 矩陣寬度： - - - Type: - 類型： - - - Universe Size: - Universe大小: - - - Keepalive Time: - 保持活動時間： - - - RGB Order: - RGB順序: - - - Single - 點 - - - Linear - 線 - - - Matrix - 面 - - - Horizontal Top Left - 水平左上角 - - - Horizontal Top Right - 水平右上角 - - - Horizontal Bottom Left - 水平左下角 - - - Horizontal Bottom Right - 水平右下角 - - - Vertical Top Left - 豎直左上角 - - - Vertical Top Right - 豎直右上角 - - - Vertical Bottom Left - 豎直左下角 - - - Vertical Bottom Right - 豎直右下角 - - - - OpenRGBE131SettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - - - OpenRGBElgatoKeyLightSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - - - OpenRGBElgatoLightStripSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - - - OpenRGBGoveeSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBHardwareIDsDialog @@ -1252,50 +1065,6 @@ 厂商 - - OpenRGBKasaSmartSettingsEntry - - Name - 名稱 - - - - OpenRGBKasaSmartSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - - - OpenRGBLIFXSettingsEntry - - Name - 名稱 - - - - OpenRGBLIFXSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBLogConsolePage @@ -1332,108 +1101,6 @@ 宽度: - - OpenRGBNanoleafNewDeviceDialog - - Port: - 埠： - - - - OpenRGBNanoleafSettingsEntry - - Port: - 埠： - - - Auth Key: - 身份驗證金鑰： - - - Unpair - 取消配對 - - - Pair - 配對 - - - - OpenRGBNanoleafSettingsPage - - Scan - 掃描 - - - To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, then click the "Pair" button within 30 seconds. - 配對時，請按住開關按鈕 5-7 秒鐘，直到 LED 開始以某種模式閃爍，然後在 30 秒內點按“配對”按鈕。 - - - Add - 添加 - - - Remove - 移除 - - - - OpenRGBPhilipsHueSettingsEntry - - Entertainment Mode: - 娛樂模式： - - - Auto Connect Group: - 自動連接： - - - Client Key: - 用戶端金鑰： - - - Username: - 使用者名稱： - - - Unpair Bridge - 未配對橋 - - - - OpenRGBPhilipsHueSettingsPage - - Remove - 移除 - - - Add - 添加 - - - Save - 保存 - - - After adding a Hue entry and saving, restart OpenRGB and press the Sync button on your Hue bridge to pair it. - 添加 Hue 條目並保存後，重新啟動 OpenRGB，然後按 Hue 網橋上的“同步”按鈕進行配對。 - - - - OpenRGBPhilipsWizSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBPluginsEntry @@ -1486,7 +1153,7 @@ - + Remove Plugin 移除插件 @@ -1496,37 +1163,37 @@ <html><head/><body>正在尋找插件？請參閱官方列表 <a href="https://openrgb.org/plugins.html">OpenRGB.org</a></body></html> - + Install OpenRGB Plugin 安裝 OpenRGB 插件 - + Plugin files (*.dll *.dylib *.so *.so.*) 插件文件 (*.dll *.dylib *.so *.so.*) - + Replace Plugin 替換插件 - + A plugin with this filename is already installed. Are you sure you want to replace this plugin? 已安裝具有此檔案名的插件。 您確定要替換此插件嗎？ - + Are you sure you want to remove this plugin? 是否確定刪除此插件？ - + Restart Needed 需要重新启动 - + The plugin will be fully removed after restarting OpenRGB. 插件在重新启动 OpenRGB 后将被完全移除。 @@ -1593,10 +1260,6 @@ OpenRGBProfileListDialog - - Profile Name - 配置檔案名稱 - Profile Selection @@ -1613,28 +1276,6 @@ 创建新配置文件： - - OpenRGBQMKORGBSettingsEntry - - Name: - 名稱： - - - - OpenRGBQMKORGBSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBSegmentExportDialog @@ -1663,44 +1304,6 @@ 设备名称（可选）： - - OpenRGBSerialSettingsEntry - - Baud: - Baud: - - - Name: - 名稱： - - - Number of LEDs: - LED數量： - - - Port: - 埠： - - - Protocol: - 協議： - - - - OpenRGBSerialSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBServerInfoPage @@ -1926,10 +1529,6 @@ Address: 地址： - - Read Device - 讀取設備 - SMBus Dumper: @@ -1982,10 +1581,6 @@ Dump Device 轉儲設備 - - SMBus Reader: - SMBus 讀卡器： - Addr: @@ -2002,50 +1597,8 @@ 大小： - - OpenRGBYeelightSettingsEntry - - Music Mode: - 音樂模式： - - - Override host IP: - 覆蓋主機 IP： - - - Left blank for auto discovering host ip - 留空用於自動發現主機 IP - - - Choose an IP... - 選擇一個 IP... - - - Choose the correct IP for the host - 為主機選擇正確的 IP - - - - OpenRGBYeelightSettingsPage - - Add - 添加 - - - Remove - 移除 - - - Save - 保存 - - OpenRGBZoneEditorDialog - - Resize Zone - 調整區域大小 - Add Segment @@ -2155,10 +1708,6 @@ Ignore 忽視 - - Resize the zones - 調整區域大小 - Controller @@ -2335,7 +1884,7 @@ 埠： - + No serial ports found 未找到串行端口 @@ -2343,325 +1892,277 @@ Settings - + Minimize on Close 關閉窗口時最小化 - Start Server - 啟動伺服器 - - - + HID Safe Mode HID 安全模式 - + Use an alternate method for detecting HID devices 使用另一种方法检测HID设备 - + Initial Detection Delay (ms) 初始检测延迟 (ms) - + Amount of time, in milliseconds, to wait before detecting devices when started 启动时等待检测设备的时间（以毫秒为单位） - + Detection 检测 - + Enable Log Console 啟用日誌控制台（需要重新啟動） - + Log Level 日志级别 - + Log File Count Limit 日志文件数量限制 - + Maximum number of log files to keep, 0 for no limit 保留的日志文件最大数量，0 表示无限制 - + Log Manager 日志管理器 - + Serve All Controllers 为所有控制器提供服务 - + Include controllers provided by client connections and plugins 包含由客户端连接和插件提供的控制器 - + Default Host 默认主机 - + Default Port 默认端口 - + Legacy Workaround 旧版变通方法 - + Workaround for some older SDK implementations that sent incorrect packet size for certain packets 针对某些较旧的SDK实现的变通方法，这些实现对某些数据包发送了不正确的数据包大小 - + Server 服务器 - + Custom Arguments 自訂參數 - + Numerical Labels 数字标签 - + Display numerical labels for otherwise non-labeled LEDs in the LED view 在LED视图中，为未标记的LED显示数字标签 - + Window Geometry 窗口几何 - + Save on Exit 關閉時保存幾何圖形 - + Load Window Geometry 載入窗口幾何圖形 - Start Client - 啟動用戶端 - - - Start at Login Settings: - 從登錄設置開始： - - - Log Manager Settings: - 日誌管理器設置： - - - Start at Login Status - 從登錄狀態開始 - - - Set Profile on Exit - 退出配置文件 - - - + Shared SMBus Access (restart required) 共享 SMBus 存取（需要重新啟動） - Set Server Host - 設定伺服器主機 - - - Set Server Port - 設置伺服器埠 - - - + Language 語言 - Load Profile - 載入配置文件 - - - Drivers Settings - 驅動程序設定 - - - + Run Zone Checks on Rescan 重新掃描時運行區域檢查 - User Interface Settings: - 用戶界面設置： - - - + Start at Login 登錄時開啟 - + Start Minimized 開啟時最小化 - + Save window geometry on exit 退出时保存窗口布局 - + X X - + Y Y - + Width 宽度 - + Height 高度 - + User Interface 用户界面 - + SMBus Sleep Mode (restart required) SMBus睡眠模式（需要重启） - + AMD SMBus: Reduce CPU Usage (restart required) AMD SMBus：降低 CPU 使用率（需要重新啟動） - + Monochrome Tray Icon 灰度托盤圖示 - Open Settings Folder - 打開設置文件夾 - - - + Disable Key Expansion 禁用密钥扩展 - + Hex Format 十六进制格式 - + Enable Start at Login 启用登录时启动 - + Start OpenRGB on login 登录时启动 OpenRGB - + Start minimized to the system tray 启动时最小化到系统托盘 - + Additional command line arguments to pass to OpenRGB when starting on login 登录时启动 OpenRGB 时传递的附加命令行参数 - + Language for the user interface 用户界面的语言 - + Keep OpenRGB active in the system tray when closing the main window 关闭主窗口时在系统托盘中保持 OpenRGB 活动 - + Use a monochrome icon in the system tray instead of a full color icon 在系统托盘中使用单色图标而不是全彩色图标 - + Select #BBGGRR or #RRGGBB format for hex display and input 选择 #BBGGRR 或 #RRGGBB 格式用于十六进制显示和输入 - + Compact Tabs 紧凑标签页 - + Display sidebar tabs as icons only 仅以图标形式显示侧边栏标签 - + Tabs on Top 标签在顶部 - + Display tabs on top instead of on the left 将标签页显示在顶部而不是左侧 - + Show LED View by Default 默认显示LED视图 - + Drivers 驱动程序 - + Enable Log File 启用日志文件 @@ -2670,14 +2171,6 @@ English - US 繁體中文 - - System Default - 系統默認 - - - A problem occurred enabling Start At Login. - 啟用“登錄時啟動”時出現問題。 - Load Profile on Exit @@ -2710,16 +2203,36 @@ + Load Profile on Service Shutdown + 服务关闭时加载配置文件 + + + + Profile to load when the OpenRGB background service shuts down + 关闭 OpenRGB 后台服务时加载的配置文件 + + + + Load Profile on Service Startup + 服务启动时加载配置文件 + + + + Profile to load when the OpenRGB background service starts up + 启动 OpenRGB 后台服务时加载的配置文件 + + + Load Profile on Suspend 在挂起时加载配置文件 - + Profile to load before system enters sleep mode 在系统进入睡眠模式之前加载的配置文件 - + Profile Manager 配置文件管理器