mirror/OpenRGB
1
0
Fork 0
mirror of https://github.com/CalcProgrammer1/OpenRGB.git synced 2025-12-26 16:57:51 -05:00
Code Issues Packages Projects Releases Wiki Activity
Files
ene_read_byte_data
OpenRGB/Controllers/ZalmanZSyncController/ZalmanZSyncController.cpp
Adam Honse be15e5a1cf Re-enable Zalman Z-Sync
2022-02-13 20:17:22 +00:00

485 lines
17 KiB
C++
Raw Permalink Blame History

/*-----------------------------------------*\
| ZalmanZSyncController.cpp |
| |
| Definitions and types for Zalman Z Sync |
| lighting controller |
| |
| The Zalman Z Sync device uses the same |
| protocol as the Corsair Lighting Node |
| devices except supports 8 channels. |
| |
| This code copied from the |
| CorsairLightingNodeController files |
| |
| Adam Honse (CalcProgrammer1) 1/30/2021 |
\*-----------------------------------------*/
#include "ZalmanZSyncController.h"
#include <fstream>
#include <iostream>
#include <string>
#include <cstring>
using namespace std::chrono_literals;
ZalmanZSyncController::ZalmanZSyncController(hid_device* dev_handle, const char* path)
{
dev = dev_handle;
location = path;
SendFirmwareRequest();
/*-----------------------------------------------------*\
| The Corsair Lighting Node Pro requires a packet within|
| 20 seconds of sending the lighting change in order |
| to not revert back into rainbow mode. Start a thread |
| to continuously send a keepalive packet every 5s |
\*-----------------------------------------------------*/
keepalive_thread_run = 1;
keepalive_thread = new std::thread(&ZalmanZSyncController::KeepaliveThread, this);
}
ZalmanZSyncController::~ZalmanZSyncController()
{
keepalive_thread_run = 0;
keepalive_thread->join();
delete keepalive_thread;
hid_close(dev);
}
void ZalmanZSyncController::KeepaliveThread()
{
while(keepalive_thread_run.load())
{
if((std::chrono::steady_clock::now() - last_commit_time) > std::chrono::seconds(1))
{
SendCommit();
}
std::this_thread::sleep_for(1s);
}
}
std::string ZalmanZSyncController::GetFirmwareString()
{
return(firmware_version);
}
std::string ZalmanZSyncController::GetLocationString()
{
return("HID: " + location);
}
std::string ZalmanZSyncController::GetSerialString()
{
wchar_t serial_string[128];
int ret = hid_get_serial_number_string(dev, serial_string, 128);
if(ret != 0)
{
return("");
}
std::wstring return_wstring = serial_string;
std::string return_string(return_wstring.begin(), return_wstring.end());
return(return_string);
}
void ZalmanZSyncController::SetChannelEffect(unsigned char channel,
unsigned char num_leds,
unsigned char mode,
unsigned char speed,
unsigned char direction,
bool random,
unsigned char red1,
unsigned char grn1,
unsigned char blu1,
unsigned char red2,
unsigned char grn2,
unsigned char blu2,
unsigned char red3,
unsigned char grn3,
unsigned char blu3
)
{
/*-----------------------------------------------------*\
| Send Reset packet |
\*-----------------------------------------------------*/
SendReset(channel);
/*-----------------------------------------------------*\
| Send Begin packet |
\*-----------------------------------------------------*/
SendBegin(channel);
/*-----------------------------------------------------*\
| Set Port State packet |
\*-----------------------------------------------------*/
SendPortState(channel, ZALMAN_Z_SYNC_PORT_STATE_HARDWARE);
/*-----------------------------------------------------*\
| Set Effect Configuration packet |
\*-----------------------------------------------------*/
SendEffectConfig
(
channel,
0,
num_leds,
mode,
speed,
direction,
random,
red1,
grn1,
blu1,
red2,
grn2,
blu2,
red3,
grn3,
blu3,
0,
0,
0
);
/*-----------------------------------------------------*\
| Send Commit packet |
\*-----------------------------------------------------*/
SendCommit();
}
void ZalmanZSyncController::SetChannelLEDs(unsigned char channel, RGBColor * colors, unsigned int num_colors)
{
unsigned char red_color_data[50];
unsigned char grn_color_data[50];
unsigned char blu_color_data[50];
unsigned char pkt_offset = 0;
unsigned char pkt_size = 0;
unsigned int colors_remaining = num_colors;
/*-----------------------------------------------------*\
| Send Port State packet |
\*-----------------------------------------------------*/
SendPortState(channel, ZALMAN_Z_SYNC_PORT_STATE_SOFTWARE);
/*-----------------------------------------------------*\
| Loop through colors and send 50 at a time |
\*-----------------------------------------------------*/
while(colors_remaining > 0)
{
if(colors_remaining < 50)
{
pkt_size = colors_remaining;
}
else
{
pkt_size = 50;
}
for(int color_idx = 0; color_idx < pkt_size; color_idx++)
{
red_color_data[color_idx] = RGBGetRValue(colors[pkt_offset + color_idx]);
grn_color_data[color_idx] = RGBGetGValue(colors[pkt_offset + color_idx]);
blu_color_data[color_idx] = RGBGetBValue(colors[pkt_offset + color_idx]);
}
SendDirect(channel, pkt_offset, pkt_size, ZALMAN_Z_SYNC_DIRECT_CHANNEL_RED, red_color_data);
SendDirect(channel, pkt_offset, pkt_size, ZALMAN_Z_SYNC_DIRECT_CHANNEL_GREEN, grn_color_data);
SendDirect(channel, pkt_offset, pkt_size, ZALMAN_Z_SYNC_DIRECT_CHANNEL_BLUE, blu_color_data);
colors_remaining -= pkt_size;
pkt_offset += pkt_size;
}
/*-----------------------------------------------------*\
| Send Commit packet |
\*-----------------------------------------------------*/
SendCommit();
}
/*-------------------------------------------------------------------------------------------------*\
| Private packet sending functions. |
\*-------------------------------------------------------------------------------------------------*/
void ZalmanZSyncController::SendFirmwareRequest()
{
int actual;
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Firmware Version Request packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x00;
usb_buf[0x01] = ZALMAN_Z_SYNC_PACKET_ID_FIRMWARE;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
actual = hid_read(dev, usb_buf, 17);
if(actual > 0)
{
if(usb_buf[0x03] < 112)
{
firmware_version = "0.7.1";
}
else
{
firmware_version = std::to_string(usb_buf[0x02]) + "." + std::to_string(usb_buf[0x03] >> 4) + "." + std::to_string(usb_buf[0x03] & 0x0F);
}
}
}
void ZalmanZSyncController::SendDirect
(
unsigned char channel,
unsigned char start,
unsigned char count,
unsigned char color_channel,
unsigned char* color_data
)
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Direct packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x00;
usb_buf[0x01] = ZALMAN_Z_SYNC_PACKET_ID_DIRECT;
usb_buf[0x02] = channel;
usb_buf[0x03] = start;
usb_buf[0x04] = count;
usb_buf[0x05] = color_channel;
/*-----------------------------------------------------*\
| Copy in color data bytes |
\*-----------------------------------------------------*/
memcpy(&usb_buf[0x06], color_data, count);
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
hid_read(dev, usb_buf, 17);
}
void ZalmanZSyncController::SendCommit()
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Update last commit time |
\*-----------------------------------------------------*/
last_commit_time = std::chrono::steady_clock::now();
/*-----------------------------------------------------*\
| Set up Commit packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x00;
usb_buf[0x01] = ZALMAN_Z_SYNC_PACKET_ID_COMMIT;
usb_buf[0x02] = 0xFF;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
hid_read(dev, usb_buf, 17);
}
void ZalmanZSyncController::SendBegin
(
unsigned char channel
)
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Begin packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x00;
usb_buf[0x01] = ZALMAN_Z_SYNC_PACKET_ID_BEGIN;
usb_buf[0x02] = channel;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
hid_read(dev, usb_buf, 17);
}
void ZalmanZSyncController::SendEffectConfig
(
unsigned char channel,
unsigned char count,
unsigned char led_type,
unsigned char mode,
unsigned char speed,
unsigned char direction,
unsigned char change_style,
unsigned char color_0_red,
unsigned char color_0_green,
unsigned char color_0_blue,
unsigned char color_1_red,
unsigned char color_1_green,
unsigned char color_1_blue,
unsigned char color_2_red,
unsigned char color_2_green,
unsigned char color_2_blue,
unsigned short temperature_0,
unsigned short temperature_1,
unsigned short temperature_2
)
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Effect Config packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x00;
usb_buf[0x01] = ZALMAN_Z_SYNC_PACKET_ID_EFFECT_CONFIG;
usb_buf[0x02] = channel;
usb_buf[0x03] = count;
usb_buf[0x04] = led_type;
/*-----------------------------------------------------*\
| Set up mode parameters |
\*-----------------------------------------------------*/
usb_buf[0x05] = mode;
usb_buf[0x06] = speed;
usb_buf[0x07] = direction;
usb_buf[0x08] = change_style;
usb_buf[0x09] = 0;
/*-----------------------------------------------------*\
| Set up mode colors |
\*-----------------------------------------------------*/
usb_buf[0x0A] = color_0_red;
usb_buf[0x0B] = color_0_green;
usb_buf[0x0C] = color_0_blue;
usb_buf[0x0D] = color_1_red;
usb_buf[0x0E] = color_1_green;
usb_buf[0x0F] = color_1_blue;
usb_buf[0x10] = color_2_red;
usb_buf[0x11] = color_2_green;
usb_buf[0x12] = color_2_blue;
/*-----------------------------------------------------*\
| Set up temperatures |
\*-----------------------------------------------------*/
usb_buf[0x13] = (temperature_0 >> 8);
usb_buf[0x14] = (temperature_0 & 0xFF);
usb_buf[0x15] = (temperature_1 >> 8);
usb_buf[0x16] = (temperature_1 & 0xFF);
usb_buf[0x17] = (temperature_2 >> 8);
usb_buf[0x18] = (temperature_2 & 0xFF);
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
hid_read(dev, usb_buf, 17);
}
void ZalmanZSyncController::SendTemperature()
{
}
void ZalmanZSyncController::SendReset
(
unsigned char channel
)
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Reset packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x00;
usb_buf[0x01] = ZALMAN_Z_SYNC_PACKET_ID_RESET;
usb_buf[0x02] = channel;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
hid_read(dev, usb_buf, 17);
}
void ZalmanZSyncController::SendPortState
(
unsigned char channel,
unsigned char state
)
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Port State packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x00;
usb_buf[0x01] = ZALMAN_Z_SYNC_PACKET_ID_PORT_STATE;
usb_buf[0x02] = channel;
usb_buf[0x03] = state;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
hid_read(dev, usb_buf, 17);
}
void ZalmanZSyncController::SendBrightness()
{
}
void ZalmanZSyncController::SendLEDCount()
{
}
void ZalmanZSyncController::SendProtocol()
{
}
Reference in New Issue View Git Blame Copy Permalink