mirror/OpenRGB
1
0
Fork 0
mirror of https://github.com/CalcProgrammer1/OpenRGB.git synced 2025-12-30 10:47:50 -05:00
Code Issues Packages Projects Releases Wiki Activity
Files
ene_zero_test
OpenRGB/Controllers/LianLiController/LianLiUniHub_AL10Controller.cpp

789 lines
31 KiB
C++
Raw Permalink Blame History

/*-----------------------------------------*\
| LianLiUniHub_AL10Controller.cpp |
| |
| Driver for Lian Li Uni Hub USB |
| lighting controller |
| |
| Oliver P 05/05/2022 |
| Credit to Luca Lovisa for original work. |
\*-----------------------------------------*/
#include "LianLiUniHub_AL10Controller.h"
#include <cstring>
using namespace std::chrono_literals;
/*----------------------------------------------------------------------------*\
| The Uni Hub is controlled by sending control transfers to various wIndex |
| addresses, allthough it announces some kind of hid interface. Hence it |
| requires libusb as hidapi provides no wIndex customization. |
\*----------------------------------------------------------------------------*/
LianLiUniHub_AL10Controller::LianLiUniHub_AL10Controller
(
libusb_device* device,
libusb_device_descriptor* descriptor
)
{
int ret;
/*--------------------------------------------------------------------*\
| Open the libusb device. |
\*--------------------------------------------------------------------*/
ret = libusb_open(device, &handle);
if(ret < 0)
{
return;
}
/*--------------------------------------------------------------------*\
| Fill in the location string from USB port numbers. |
\*--------------------------------------------------------------------*/
uint8_t ports[7];
ret = libusb_get_port_numbers(device, ports, sizeof(ports));
if(ret > 0)
{
location = "USB: ";
for (int i = 0; i < ret; i ++)
{
location += std::to_string(ports[i]);
location.push_back(':');
}
location.pop_back();
}
/*--------------------------------------------------------------------*\
| Fill in the serial string from the string descriptor |
\*--------------------------------------------------------------------*/
char serialStr[64];
ret = libusb_get_string_descriptor_ascii(handle, descriptor->iSerialNumber, reinterpret_cast<unsigned char*>(serialStr), sizeof(serialStr));
if(ret > 0)
{
serial = std::string(serialStr, ret);
}
/*--------------------------------------------------------------------*\
| Fill in the version string by reading version from device. |
\*--------------------------------------------------------------------*/
version = ReadVersion();
/*--------------------------------------------------------------------*\
| Create channels with their static configuration and "sane" defaults. |
\*--------------------------------------------------------------------*/
Channel channel1;
channel1.index = 0;
channel1.anyFanCountOffset = UNIHUB_AL10_ANY_C1_FAN_COUNT_OFFSET;
channel1.anyFanCount = UNIHUB_AL10_ANY_FAN_COUNT_001;
channel1.ledActionAddress = UNIHUB_AL10_LED_C1_ACTION_ADDRESS;
channel1.ledCommitAddress = UNIHUB_AL10_LED_C1_COMMIT_ADDRESS;
channel1.ledModeAddress = UNIHUB_AL10_LED_C1_MODE_ADDRESS;
channel1.ledSpeedAddress = UNIHUB_AL10_LED_C1_SPEED_ADDRESS;
channel1.ledDirectionAddress = UNIHUB_AL10_LED_C1_DIRECTION_ADDRESS;
channel1.ledBrightnessAddress = UNIHUB_AL10_LED_C1_BRIGHTNESS_ADDRESS;
channel1.ledMode = UNIHUB_AL10_LED_MODE_RAINBOW;
channel1.ledSpeed = UNIHUB_AL10_LED_SPEED_100;
channel1.ledDirection = UNIHUB_AL10_LED_DIRECTION_LTR;
channel1.ledBrightness = UNIHUB_AL10_LED_BRIGHTNESS_100;
channel1.fanHubActionAddress = UNIHUB_AL10_FAN_C1_HUB_ACTION_ADDRESS;
channel1.fanHubCommitAddress = UNIHUB_AL10_FAN_C1_HUB_COMMIT_ADDRESS;
channel1.fanPwmActionAddress = UNIHUB_AL10_FAN_C1_PWM_ACTION_ADDRESS;
channel1.fanPwmCommitAddress = UNIHUB_AL10_FAN_C1_PWM_COMMIT_ADDRESS;
channel1.fanRpmActionAddress = UNIHUB_AL10_FAN_C1_RPM_ACTION_ADDRESS;
channel1.fanSpeed = UNIHUB_AL10_FAN_SPEED_QUIET;
channels[0] = channel1;
Channel channel2;
channel2.index = 1;
channel2.anyFanCountOffset = UNIHUB_AL10_ANY_C2_FAN_COUNT_OFFSET;
channel2.anyFanCount = UNIHUB_AL10_ANY_FAN_COUNT_001;
channel2.ledActionAddress = UNIHUB_AL10_LED_C2_ACTION_ADDRESS;
channel2.ledCommitAddress = UNIHUB_AL10_LED_C2_COMMIT_ADDRESS;
channel2.ledModeAddress = UNIHUB_AL10_LED_C2_MODE_ADDRESS;
channel2.ledSpeedAddress = UNIHUB_AL10_LED_C2_SPEED_ADDRESS;
channel2.ledDirectionAddress = UNIHUB_AL10_LED_C2_DIRECTION_ADDRESS;
channel2.ledBrightnessAddress = UNIHUB_AL10_LED_C2_BRIGHTNESS_ADDRESS;
channel2.ledMode = UNIHUB_AL10_LED_MODE_RAINBOW;
channel2.ledSpeed = UNIHUB_AL10_LED_SPEED_100;
channel2.ledDirection = UNIHUB_AL10_LED_DIRECTION_LTR;
channel2.ledBrightness = UNIHUB_AL10_LED_BRIGHTNESS_100;
channel2.fanHubActionAddress = UNIHUB_AL10_FAN_C2_HUB_ACTION_ADDRESS;
channel2.fanHubCommitAddress = UNIHUB_AL10_FAN_C2_HUB_COMMIT_ADDRESS;
channel2.fanPwmActionAddress = UNIHUB_AL10_FAN_C2_PWM_ACTION_ADDRESS;
channel2.fanPwmCommitAddress = UNIHUB_AL10_FAN_C2_PWM_COMMIT_ADDRESS;
channel2.fanRpmActionAddress = UNIHUB_AL10_FAN_C2_RPM_ACTION_ADDRESS;
channel2.fanSpeed = UNIHUB_AL10_FAN_SPEED_QUIET;
channels[1] = channel2;
Channel channel3;
channel3.index = 2;
channel3.anyFanCountOffset = UNIHUB_AL10_ANY_C3_FAN_COUNT_OFFSET;
channel3.anyFanCount = UNIHUB_AL10_ANY_FAN_COUNT_001;
channel3.ledActionAddress = UNIHUB_AL10_LED_C3_ACTION_ADDRESS;
channel3.ledCommitAddress = UNIHUB_AL10_LED_C3_COMMIT_ADDRESS;
channel3.ledModeAddress = UNIHUB_AL10_LED_C3_MODE_ADDRESS;
channel3.ledSpeedAddress = UNIHUB_AL10_LED_C3_SPEED_ADDRESS;
channel3.ledDirectionAddress = UNIHUB_AL10_LED_C3_DIRECTION_ADDRESS;
channel3.ledBrightnessAddress = UNIHUB_AL10_LED_C3_BRIGHTNESS_ADDRESS;
channel3.ledMode = UNIHUB_AL10_LED_MODE_RAINBOW;
channel3.ledSpeed = UNIHUB_AL10_LED_SPEED_100;
channel3.ledDirection = UNIHUB_AL10_LED_DIRECTION_LTR;
channel3.ledBrightness = UNIHUB_AL10_LED_BRIGHTNESS_100;
channel3.fanHubActionAddress = UNIHUB_AL10_FAN_C3_HUB_ACTION_ADDRESS;
channel3.fanHubCommitAddress = UNIHUB_AL10_FAN_C3_HUB_COMMIT_ADDRESS;
channel3.fanPwmActionAddress = UNIHUB_AL10_FAN_C3_PWM_ACTION_ADDRESS;
channel3.fanPwmCommitAddress = UNIHUB_AL10_FAN_C3_PWM_COMMIT_ADDRESS;
channel3.fanRpmActionAddress = UNIHUB_AL10_FAN_C3_RPM_ACTION_ADDRESS;
channel3.fanSpeed = UNIHUB_AL10_FAN_SPEED_QUIET;
channels[2] = channel3;
Channel channel4;
channel4.index = 3;
channel4.anyFanCountOffset = UNIHUB_AL10_ANY_C4_FAN_COUNT_OFFSET;
channel4.anyFanCount = UNIHUB_AL10_ANY_FAN_COUNT_001;
channel4.ledActionAddress = UNIHUB_AL10_LED_C4_ACTION_ADDRESS;
channel4.ledCommitAddress = UNIHUB_AL10_LED_C4_COMMIT_ADDRESS;
channel4.ledModeAddress = UNIHUB_AL10_LED_C4_MODE_ADDRESS;
channel4.ledSpeedAddress = UNIHUB_AL10_LED_C4_SPEED_ADDRESS;
channel4.ledDirectionAddress = UNIHUB_AL10_LED_C4_DIRECTION_ADDRESS;
channel4.ledBrightnessAddress = UNIHUB_AL10_LED_C4_BRIGHTNESS_ADDRESS;
channel4.ledMode = UNIHUB_AL10_LED_MODE_RAINBOW;
channel4.ledSpeed = UNIHUB_AL10_LED_SPEED_100;
channel4.ledDirection = UNIHUB_AL10_LED_DIRECTION_LTR;
channel4.ledBrightness = UNIHUB_AL10_LED_BRIGHTNESS_100;
channel4.fanHubActionAddress = UNIHUB_AL10_FAN_C4_HUB_ACTION_ADDRESS;
channel4.fanHubCommitAddress = UNIHUB_AL10_FAN_C4_HUB_COMMIT_ADDRESS;
channel4.fanPwmActionAddress = UNIHUB_AL10_FAN_C4_PWM_ACTION_ADDRESS;
channel4.fanPwmCommitAddress = UNIHUB_AL10_FAN_C4_PWM_COMMIT_ADDRESS;
channel4.fanRpmActionAddress = UNIHUB_AL10_FAN_C4_RPM_ACTION_ADDRESS;
channel4.fanSpeed = UNIHUB_AL10_FAN_SPEED_QUIET;
channels[3] = channel4;
}
LianLiUniHub_AL10Controller::~LianLiUniHub_AL10Controller()
{
CloseLibusb();
}
std::string LianLiUniHub_AL10Controller::GetVersion()
{
return version;
}
std::string LianLiUniHub_AL10Controller::GetLocation()
{
return location;
}
std::string LianLiUniHub_AL10Controller::GetSerial()
{
return serial;
}
void LianLiUniHub_AL10Controller::SetAnyFanCount(size_t channel, uint8_t count)
{
/*-------------------------------------*\
| Check for invalid channel |
\*-------------------------------------*/
if(channel >= UNIHUB_AL10_CHANNEL_COUNT)
{
return;
}
channels[channel].anyFanCount = count;
}
void LianLiUniHub_AL10Controller::SetLedColors(size_t channel, RGBColor* colors, size_t count)
{
/*-------------------------------------*\
| Check for invalid channel |
\*-------------------------------------*/
if(channel >= UNIHUB_AL10_CHANNEL_COUNT)
{
return;
}
/*-------------------------------------*\
| Check for invalid count |
\*-------------------------------------*/
if(count > UNIHUB_AL10_CHANLED_COUNT)
{
count = UNIHUB_AL10_CHANLED_COUNT;
}
/*-------------------------------------*\
| Check for mode colors |
\*-------------------------------------*/
size_t i = 0;
switch(channels[channel].ledMode)
{
case UNIHUB_AL10_LED_MODE_RAINBOW:
channels[channel].colors[0].r = 0xFC;
channels[channel].colors[0].b = 0xFC;
channels[channel].colors[0].g = 0xFC;
i = 1;
break;
case UNIHUB_AL10_LED_MODE_BREATHING:
for(unsigned int color_idx = 0; color_idx < count; color_idx++)
{
for(unsigned int led_idx = 0; led_idx < 20; led_idx++)
{
channels[channel].colors[led_idx + (color_idx * 20)].r = RGBGetRValue(colors[color_idx]);
channels[channel].colors[led_idx + (color_idx * 20)].b = RGBGetBValue(colors[color_idx]);
channels[channel].colors[led_idx + (color_idx * 20)].g = RGBGetGValue(colors[color_idx]);
i++;
}
}
break;
case UNIHUB_AL10_LED_MODE_SCAN:
for(; i < 20; i++)
{
channels[channel].colors[i].r = 0x00;
channels[channel].colors[i].b = 0x00;
channels[channel].colors[i].g = 0x00;
}
channels[channel].colors[0x00].r = RGBGetRValue(colors[0]);
channels[channel].colors[0x00].b = RGBGetBValue(colors[0]);
channels[channel].colors[0x00].g = RGBGetGValue(colors[0]);
channels[channel].colors[0x08].r = RGBGetRValue(colors[1]);
channels[channel].colors[0x08].b = RGBGetBValue(colors[1]);
channels[channel].colors[0x08].g = RGBGetGValue(colors[1]);
break;
default:
for(; i < count; i++)
{
channels[channel].colors[i].r = (RGBGetRValue(colors[i]));
channels[channel].colors[i].b = (RGBGetBValue(colors[i]));
channels[channel].colors[i].g = (RGBGetGValue(colors[i]));
// Limiter to protect LEDs
if(UNIHUB_AL10_LED_LIMITER && (channels[channel].colors[i].r > 153) && (channels[channel].colors[i].r == channels[channel].colors[i].b) && (channels[channel].colors[i].r == channels[channel].colors[i].g))
{
channels[channel].colors[i].r = 153;
channels[channel].colors[i].b = 153;
channels[channel].colors[i].g = 153;
}
}
}
/* Set all remaining leds to black */
for(; i < UNIHUB_AL10_CHANLED_COUNT; i++)
{
channels[channel].colors[i].r = 0x00;
channels[channel].colors[i].b = 0x00;
channels[channel].colors[i].g = 0x00;
}
}
void LianLiUniHub_AL10Controller::SetLedMode(size_t channel, uint8_t mode)
{
/*-------------------------------------*\
| Check for invalid channel |
\*-------------------------------------*/
if(channel >= UNIHUB_AL10_CHANNEL_COUNT)
{
return;
}
channels[channel].ledMode = mode;
}
void LianLiUniHub_AL10Controller::SetLedSpeed(size_t channel, uint8_t speed)
{
/*-------------------------------------*\
| Check for invalid channel |
\*-------------------------------------*/
if(channel >= UNIHUB_AL10_CHANNEL_COUNT)
{
return;
}
channels[channel].ledSpeed = speed;
}
void LianLiUniHub_AL10Controller::SetLedDirection(size_t channel, uint8_t direction)
{
/*-------------------------------------*\
| Check for invalid channel |
\*-------------------------------------*/
if(channel >= UNIHUB_AL10_CHANNEL_COUNT)
{
return;
}
channels[channel].ledDirection = direction;
}
void LianLiUniHub_AL10Controller::SetLedBrightness(size_t channel, uint8_t brightness)
{
/*-------------------------------------*\
| Check for invalid channel |
\*-------------------------------------*/
if(channel >= UNIHUB_AL10_CHANNEL_COUNT)
{
return;
}
channels[channel].ledBrightness = brightness;
}
uint16_t LianLiUniHub_AL10Controller::GetFanSpeed(size_t channel)
{
/*-------------------------------------*\
| Check for invalid channel |
\*-------------------------------------*/
if(channel >= UNIHUB_AL10_CHANNEL_COUNT)
{
return 0;
}
return channels[channel].fanSpeed;
}
void LianLiUniHub_AL10Controller::SetFanSpeed(size_t channel, uint16_t speed)
{
/*-------------------------------------*\
| Check for invalid channel |
\*-------------------------------------*/
if(channel >= UNIHUB_AL10_CHANNEL_COUNT)
{
return;
}
channels[channel].fanSpeed = speed;
}
void LianLiUniHub_AL10Controller::EnableRgbhMode()
{
rgbhModeEnabled = true;
}
void LianLiUniHub_AL10Controller::DisableRgbhMode()
{
rgbhModeEnabled = false;
}
void LianLiUniHub_AL10Controller::EnableSyncMode()
{
syncModeEnabled = true;
}
void LianLiUniHub_AL10Controller::DisableSyncMode()
{
syncModeEnabled = false;
}
/*----------------------------------------------------------------------------*\
| The Uni Hub is a PWM and LED controller designed specifically for the Lian |
| Li Uni Fans. It can control them by itself using the built-in effect engine |
| can also be connected to the mainboard via 4-pin PWM and 3-pin RGB cables |
| and forward these signals. The protocol implementation below was build as |
| close a possible to the Lian Li L-Connect software. |
| |
| The commands to control the fan speeds and to switch between controller and |
| mainboard control is already included, but currently deactivated as OpenRGB |
| had no fan control module or controller specific configuration at the time |
| of writing. |
\*----------------------------------------------------------------------------*/
void LianLiUniHub_AL10Controller::Synchronize()
{
/*---------------------------------------------------------------------*\
| Configure common settings. |
\*---------------------------------------------------------------------*/
/*---------------------------------------------------------------------*\
| Still unsure about this. Probably some sort of configuration |
| initialization |
\*---------------------------------------------------------------------*/
uint8_t config_initialization[16];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(config_initialization, 0x00, sizeof(config_initialization));
config_initialization[0x0F] = 0x43; // Control data
config_initialization[0x0F] = 0x01; // Ending data
SendConfig(UNIHUB_AL10_ACTION_ADDRESS, config_initialization, sizeof(config_initialization));
for(const Channel& channel : channels)
{
/*-------------------------------------*\
| The Uni Hub doesn't know zero fans |
\*-------------------------------------*/
uint8_t anyFanCount = channel.anyFanCount;
if(anyFanCount == UNIHUB_AL10_ANY_FAN_COUNT_000)
{
anyFanCount = UNIHUB_AL10_ANY_FAN_COUNT_001;
}
/*-------------------------------------*\
| Configure the physical fan count |
\*-------------------------------------*/
uint8_t config_fan_count[16];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(config_fan_count, 0x00, sizeof(config_fan_count));
config_fan_count[0x01] = 0x40; // Control data
config_fan_count[0x02] = channel.index + 1; // Channel
config_fan_count[0x03] = anyFanCount + 1; // Number of fans
config_fan_count[0x0F] = 0x01; // Ending data
SendConfig(UNIHUB_AL10_ACTION_ADDRESS, config_fan_count, sizeof(config_fan_count));
//SendCommit(UNIHUB_AL10_COMMIT_ADDRESS);
}
/*--------------------------------------------------------------------*\
| Configure channels for sync effects |
\*--------------------------------------------------------------------*/
/*
if(syncModeEnabled)
{
uint8_t config_sync[6];
uint8_t config_sync_index = 0;
config_sync[config_sync_index++] = 0x33;
for(const Channel& channel : channels)
{
if(channel.anyFanCount != UNIHUB_AL10_ANY_FAN_COUNT_000)
{
config_sync[config_sync_index++] = channel.index;
}
}
config_sync[config_sync_index++] = 0x08;
SendConfig(UNIHUB_AL10_ACTION_ADDRESS, config_sync, config_sync_index);
SendCommit(UNIHUB_AL10_COMMIT_ADDRESS);
}
*/
/*--------------------------------------------------------------------*\
| Configure led settings. |
\*--------------------------------------------------------------------*/
for(const Channel& channel : channels)
{
if(channel.anyFanCount != UNIHUB_AL10_ANY_FAN_COUNT_000)
{
for(unsigned int fan_idx = 0; fan_idx <= UNIHUB_AL10_ANY_FAN_COUNT_004; fan_idx++)
{
/*-----------------------------*\
| Configure fan colors |
\*-----------------------------*/
uint8_t fan_config_colors[24];
memcpy(fan_config_colors, channel.colors + (fan_idx * 20), sizeof(fan_config_colors));
SendConfig(channel.ledActionAddress + (60 * fan_idx), fan_config_colors, sizeof(fan_config_colors));
}
/*-----------------------------*\
| Configure led mode |
\*-----------------------------*/
uint8_t led_config[16];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(led_config, 0x00, sizeof(led_config));
led_config[0x01] = channel.ledMode; // Effect
led_config[0x02] = channel.ledSpeed; // Speed
led_config[0x03] = channel.ledDirection; // Direction
led_config[0x09] = channel.ledBrightness; // Brightness?
led_config[0x0F] = 0x01; // Ending data
SendConfig(UNIHUB_AL10_ACTION_ADDRESS + (channel.index * 32 ), led_config, sizeof(led_config));
for(unsigned int fan_idx = 0; fan_idx <= UNIHUB_AL10_ANY_FAN_COUNT_004; fan_idx++)
{
/*-----------------------------*\
| Configure rim colors |
\*-----------------------------*/
uint8_t rim_config_colors[36];
memcpy(rim_config_colors, channel.colors + (fan_idx * 20) + 8, sizeof(rim_config_colors));
SendConfig(channel.ledActionAddress + 24 + (60 * fan_idx), rim_config_colors, sizeof(rim_config_colors));
}
SendConfig(UNIHUB_AL10_ACTION_ADDRESS + 16 + (channel.index * 32 ), led_config, sizeof(led_config));
}
/*-----------------------------------------------------------------*\
| The Uni Hub doesn't know zero fans so we set them to black |
\*-----------------------------------------------------------------*/
else
{
for(unsigned int fan_idx = 0; fan_idx <= UNIHUB_AL10_ANY_FAN_COUNT_004; fan_idx++)
{
/*-----------------------------*\
| Configure fan colors |
\*-----------------------------*/
uint8_t fan_config_colors[24];
memset(fan_config_colors, 0x00, sizeof(fan_config_colors));
SendConfig(channel.ledActionAddress + (60 * fan_idx), fan_config_colors, sizeof(fan_config_colors));
}
/*-----------------------------*\
| Configure led mode |
\*-----------------------------*/
uint8_t led_config[16];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(led_config, 0x00, sizeof(led_config));
led_config[0x01] = UNIHUB_AL10_LED_MODE_STATIC_COLOR; // Effect
led_config[0x02] = channel.ledSpeed; // Speed?
led_config[0x03] = channel.ledDirection; // direction
led_config[0x0F] = 0x01; // Ending data
SendConfig(UNIHUB_AL10_ACTION_ADDRESS + (channel.index * 32 ), led_config, sizeof(led_config));
for(unsigned int fan_idx = 0; fan_idx <= UNIHUB_AL10_ANY_FAN_COUNT_004; fan_idx++)
{
/*-----------------------------*\
| Configure rim colors |
\*-----------------------------*/
uint8_t rim_config_colors[36];
memset(rim_config_colors, 0x00, sizeof(rim_config_colors));
SendConfig(channel.ledActionAddress + 24 + (60 * fan_idx), rim_config_colors, sizeof(rim_config_colors));
}
SendConfig(UNIHUB_AL10_ACTION_ADDRESS + 16 + (channel.index * 32 ), led_config, sizeof(led_config));
}
}
/*--------------------------------------------------------------------*\
| Configure fan settings. Comment out until enabling fan control |
\*--------------------------------------------------------------------*/
// uint8_t control = 0;
// /*-------------------------------------*\
// | Configure fan settings |
// \*-------------------------------------*/
// for(const Channel& channel : channels)
// {
// if(channel.fanSpeed == UNIHUB_AL10_FAN_SPEED_PWM)
// {
// /*-----------------------------*\
// | Configure the fan to pwm |
// | control |
// \*-----------------------------*/
// uint8_t config_pwm[1] = { 0x00 };
// control |= (0x01 << channel.index);
// SendConfig(channel.fanPwmActionAddress, config_pwm, sizeof(config_pwm));
// SendCommit(channel.fanPwmCommitAddress);
// }
// else
// {
// /*-----------------------------*\
// | Configure the fan to hub |
// | control and set speed |
// \*-----------------------------*/
// uint8_t config_hub[2] = { (uint8_t)(channel.fanSpeed >> 0x08), (uint8_t)(channel.fanSpeed & 0xFF) };
// SendConfig(channel.fanHubActionAddress, config_hub, sizeof(config_hub));
// SendCommit(channel.fanHubCommitAddress);
// }
// }
// /*-------------------------------------*\
// | Configure fan control modes |
// \*-------------------------------------*/
// uint8_t config_fan_mode[2] = { 0x31, (uint8_t)(0xF0 | control) };
// SendConfig(UNIHUB_AL10_ACTION_ADDRESS, config_fan_mode, sizeof(config_fan_mode));
// SendCommit(UNIHUB_AL10_COMMIT_ADDRESS);
/*--------------------------------------------------------------------*\
| Configure led settings. |
\*--------------------------------------------------------------------*/
// if(rgbhModeEnabled)
// {
/*-------------------------------------*\
| Configure the leds to hdr control. |
\*-------------------------------------*/
// uint8_t config_hdr[2] = { 0x30, 0x01 };
// SendConfig(UNIHUB_AL10_ACTION_ADDRESS, config_hdr, sizeof(config_hdr));
// SendCommit(UNIHUB_AL10_COMMIT_ADDRESS);
// }
// else
// {
/*-------------------------------------*\
| Configure the leds to hub control |
\*-------------------------------------*/
// uint8_t config_hub[2] = { 0x30, 0x00 };
// SendConfig(UNIHUB_AL10_ACTION_ADDRESS, config_hub, sizeof(config_hub));
// SendCommit(UNIHUB_AL10_COMMIT_ADDRESS);
// }
}
uint16_t LianLiUniHub_AL10Controller::ReadFanSpeed(size_t channel)
{
/*-------------------------------------*\
| Check for invalid handle |
\*-------------------------------------*/
if(handle == nullptr)
{
return(0);
}
/*-------------------------------------*\
| Check for invalid channel |
\*-------------------------------------*/
if(channel > UNIHUB_AL10_CHANNEL_COUNT)
{
return(0);
}
uint8_t buffer[2];
uint8_t length = sizeof(buffer);
uint16_t wIndex = channels[channel].fanRpmActionAddress;
/*-------------------------------------*\
| Send packet |
\*-------------------------------------*/
size_t ret = libusb_control_transfer(handle, /* dev_handle */
0xC0, /* bmRequestType */
0x81, /* bRequest */
0x00, /* wValue */
wIndex, /* wIndex */
buffer, /* data */
length, /* wLength */
1000); /* timeout */
/*-------------------------------------*\
| Check for communication error |
\*-------------------------------------*/
if(ret != length)
{
return(0);
}
return(*(uint16_t*)buffer);
}
void LianLiUniHub_AL10Controller::CloseLibusb()
{
if (handle != nullptr)
{
libusb_close(handle);
handle = nullptr;
}
}
std::string LianLiUniHub_AL10Controller::ReadVersion()
{
/*-------------------------------------*\
| Check for invalid handle |
\*-------------------------------------*/
if(handle == nullptr)
{
return("");
}
uint8_t buffer[5];
uint8_t length = sizeof(buffer);
/*-------------------------------------*\
| Send packet |
\*-------------------------------------*/
size_t ret = libusb_control_transfer(handle, /* dev_handle */
0xC0, /* bmRequestType */
0x81, /* bRequest */
0x00, /* wValue */
0xB500, /* wIndex */
buffer, /* data */
length, /* wLength */
1000); /* timeout */
/*-------------------------------------*\
| Check for communication error |
\*-------------------------------------*/
if(ret != length)
{
return("");
}
/*-------------------------------------*\
| Format version string |
\*-------------------------------------*/
char version[15];
int vlength = std::snprintf(version, sizeof(version), "%x.%x.%x.%x.%x", buffer[0], buffer[1], buffer[2], buffer[3], buffer[4]);
return(std::string(version, vlength));
}
void LianLiUniHub_AL10Controller::SendConfig(uint16_t wIndex, uint8_t *config, size_t length)
{
/*-------------------------------------*\
| Check for invalid handle |
\*-------------------------------------*/
if(handle == nullptr)
{
return;
}
/*-------------------------------------*\
| Send packet |
\*-------------------------------------*/
size_t ret = libusb_control_transfer(handle, /* dev_handle */
0x40, /* bmRequestType */
0x80, /* bRequest */
0x00, /* wValue */
wIndex, /* wIndex */
config, /* data */
length, /* wLength */
1000); /* timeout */
std::this_thread::sleep_for(5ms);
/*-------------------------------------*\
| Check for communication error |
\*-------------------------------------*/
if(ret != length)
{
return;
}
}
void LianLiUniHub_AL10Controller::SendCommit(uint16_t wIndex)
{
/*-------------------------------------*\
| Set up config packet |
\*-------------------------------------*/
uint8_t config[1] = { 0x01 };
/*-------------------------------------*\
| Send packet |
\*-------------------------------------*/
SendConfig(wIndex, config, sizeof(config));
std::this_thread::sleep_for(5ms);
}
Reference in New Issue View Git Blame Copy Permalink