mirror/OpenRGB
1
0 Fork 0
mirror of https://github.com/CalcProgrammer1/OpenRGB.git synced 2026-09-13 13:47:02 -04:00
Code Issues Packages Projects Releases Wiki Activity
Files
770e40596ec6b1c028be9a4138f6fdce4baf7bf2
OpenRGB/Controllers/LogitechController/LogitechHIDPP20Controller/LogitechHIDPP20Controller.cpp
T

7469 lines
279 KiB
C++
Raw Blame History

/*---------------------------------------------------------*\
| LogitechHIDPP20Controller.cpp |
| |
| Unified Logitech HID++ 2.0 controller implementation |
| |
| This file is part of the OpenRGB project |
| SPDX-License-Identifier: GPL-2.0-or-later |
\*---------------------------------------------------------*/
#include <cstring>
#include <thread>
#include <chrono>
#include <set>
#include <vector>
#include <map>
#include "LogitechHIDPP20Controller.h"
#include "LogitechHIDPP20ReceiverWatcher.h"
#include "RGBController_LogitechHIDPP20.h"
#include "LogManager.h"
#include "LogitechHIDPP20IdleSettings.h"
#define LOG_TAG log_tag.c_str()
/*---------------------------------------------------------*\
| Hard cap on per-call non-HID++ drains in the read loop. A |
| high-polling-rate mouse can put 50+ input reports in the |
| buffer between our reads; this cap prevents pathological |
| input-flood scenarios from locking up a single read call. |
| 64 is enough headroom for normal congestion at 1 kHz. |
\*---------------------------------------------------------*/
static const int HIDPP20_READ_DRAIN_BUDGET = 64;
/*---------------------------------------------------------*\
| Per-candidate read timeout (ms) for the Centurion 0x50 |
| device-address probe. USB round-trip is <1ms; 5ms gives |
| 5x margin. Worst case (no device responds) 256 x 5 = |
| ~1.3s; typical G522 at addr 0x23 is ~180ms. Matches |
| Solaar's probe_centurion_device_addr constant. |
\*---------------------------------------------------------*/
static const int CENTURION_PROBE_PER_ADDR_TIMEOUT_MS = 5;
/*---------------------------------------------------------*\
| Device-name helpers. A placeholder is empty or one of the |
| HIDPP20_NAME_PLACEHOLDER_* strings. A name "looks real" |
| when it is non-empty, printable ASCII, and a sane length. |
| This rejects 0x0101 firmware-data responses that are |
| not an actual name. |
\*---------------------------------------------------------*/
static bool HIDPP20NameIsPlaceholder(const std::string& n)
{
return n.empty()
|| n == HIDPP20_NAME_PLACEHOLDER_STD
|| n == HIDPP20_NAME_PLACEHOLDER_CENTURION;
}
bool LogitechHIDPP20Controller::NameLooksReal(const std::string& n)
{
if(n.empty() || n.size() > 64)
{
return false;
}
for(unsigned char c : n)
{
if(c < 0x20 || c > 0x7E)
{
return false;
}
}
return true;
}
/*---------------------------------------------------------*\
| Observed HID++ 2.0 feature versions. Each row is |
| a feature ID plus the versions we've empirically |
| verified working. When feature discovery reports |
| a version outside this set, we log a one-shot |
| INFO tripwire so a tester with new hardware |
| immediately surfaces unknown firmware revs. |
| |
| Purely observational, no behavior branches on |
| version. Solaar has effectively zero version |
| gating for the RGB features we implement, so we |
| don't either; the table is a "have we seen this |
| combination work" ledger, not a compatibility |
| matrix. Add versions as devices report them. |
| |
| A feature_id absent from this table is silent |
| (no tripwire). Only features we actually |
| exercise are worth flagging. |
\*---------------------------------------------------------*/
struct HIDPP20FeatureVersionSet
{
uint16_t feature_id;
uint8_t versions[8]; /* approved versions; first `count` valid */
uint8_t count;
};
static constexpr HIDPP20FeatureVersionSet HIDPP20_FEATURE_OBSERVED_VERSIONS[] =
{
{ 0x0620, { 1 }, 1 },
{ 0x1D4B, { 0 }, 1 },
{ 0x4540, { 0, 1 }, 2 },
{ 0x8070, { 0, 3, 5 }, 3 },
{ 0x8071, { 0, 4 }, 2 },
{ 0x8080, { 0 }, 1 },
{ 0x8081, { 0, 2 }, 2 },
};
/*---------------------------------------------------------*\
| Returns true if feature_id is not tracked (silent) or if |
| version appears in the tracked feature's approved set. |
\*---------------------------------------------------------*/
static bool FeatureVersionIsObserved(uint16_t feature_id, uint8_t version)
{
size_t table_len = sizeof(HIDPP20_FEATURE_OBSERVED_VERSIONS)
/ sizeof(HIDPP20_FEATURE_OBSERVED_VERSIONS[0]);
for(size_t r = 0; r < table_len; r++)
{
const HIDPP20FeatureVersionSet& row = HIDPP20_FEATURE_OBSERVED_VERSIONS[r];
if(row.feature_id != feature_id)
{
continue;
}
for(uint8_t i = 0; i < row.count; i++)
{
if(row.versions[i] == version)
{
return true;
}
}
return false; /* tracked feature, unknown version */
}
return true; /* feature not tracked, silent */
}
LogitechHIDPP20Controller::LogitechHIDPP20Controller
(
hid_device* dev,
const char* path,
uint8_t device_index,
bool wireless,
std::shared_ptr<std::mutex> mutex_ptr,
uint16_t usage_page,
hid_device* perkey_vl_dev
)
{
this->dev = dev;
this->dev_perkey_vl = perkey_vl_dev;
this->location = path;
this->device_index = device_index;
this->wireless = wireless;
this->mutex = mutex_ptr;
this->long_only = false;
this->teardown_pending = false;
this->initialized = false;
this->sw_control_claimed = false;
this->last_fap_error_ = 0;
this->pipelining_claim_ = false;
this->discovery_in_progress_.store(false);
this->sw_control_needs_upgrade_to_5 = false;
this->prep_applied = false;
this->frame_counter = 0;
this->retry_paint_deadline_.store(std::chrono::steady_clock::time_point{});
this->retry_paint_attempt_.store(0);
this->wake_full_repaint_pending_.store(false);
this->init_generation = 0;
this->log_tag = "[LogitechHID++ " + std::string(path) + "]";
this->reader_thread = nullptr;
this->reader_running = false;
this->power_thread = nullptr;
this->power_thread_running = false;
this->pending_activity = -1;
this->pending_connection = 0;
this->pending_power_check = false;
this->device_online = true;
this->consecutive_timeouts = 0;
this->power_state = HIDPP20_POWER_ACTIVE;
this->deep_sleep = false;
this->consecutive_frame_end_failures = 0;
this->dim_brightness_pct = 100;
this->dim_step = 0;
this->idle_timeout_s = 60;
this->sleep_timeout_s = 300;
caps = {};
/*-----------------------------------------------------*\
| Default to standard HID++ transport; |
| DiscoverTransport() may change this during |
| Probe() if Centurion is detected. |
\*-----------------------------------------------------*/
transport.type = HIDPP20_TRANSPORT_STANDARD;
transport.usage_page = usage_page;
transport.report_id = LOGITECH_LONG_MESSAGE;
transport.addressed = false;
transport.device_address = 0x00;
transport.bridge_feat_idx = 0;
transport.sub_device_id = 0;
transport.bridge_mtu = 0;
}
LogitechHIDPP20Controller::~LogitechHIDPP20Controller()
{
/*-----------------------------------------------------*\
| Waits, retries and backoff sleeps check this and |
| return rather than run their course, so teardown |
| takes milliseconds. |
\*-----------------------------------------------------*/
teardown_pending.store(true);
/*-----------------------------------------------------*\
| Deregister from the node watcher first, under its |
| lock: after this returns no nudge can reach this |
| controller. |
\*-----------------------------------------------------*/
LogitechHIDPP20ReceiverWatcher::UnregisterSubDevice(this);
if(initialized)
{
Shutdown();
}
/*-----------------------------------------------------*\
| Event-watcher controllers run reader/power |
| threads without ever initializing; |
| Shutdown() won't have stopped them. |
| Idempotent, so safe to call unconditionally. |
\*-----------------------------------------------------*/
StopSenderThread();
StopPowerManager();
if(dev)
{
hid_close(dev);
}
if(dev_perkey_vl && dev_perkey_vl != dev)
{
hid_close(dev_perkey_vl);
}
}
/*---------------------------------------------------------*\
| Transport-layer I/O |
| |
| SendMessage/ReadMessage dispatch to the appropriate |
| transport implementation based on transport.type. |
| SendAndReceive is a convenience wrapper. |
\*---------------------------------------------------------*/
int LogitechHIDPP20Controller::SendMessage
(
uint8_t feat_idx,
uint8_t function,
const uint8_t* data,
size_t len
)
{
switch(transport.type)
{
case HIDPP20_TRANSPORT_CENTURION:
return SendCenturion(feat_idx, function, data, len);
case HIDPP20_TRANSPORT_STANDARD:
default:
return SendStandard(feat_idx, function, data, len);
}
}
int LogitechHIDPP20Controller::ReadMessage
(
uint8_t* feat_idx_out,
uint8_t* function_out,
uint8_t* data_out,
size_t data_max,
int timeout_ms
)
{
/*-----------------------------------------------------*\
| When the reader thread is running, it is the sole |
| caller of hid_read_timeout. All other reads come from |
| the queue. Before the reader starts (during |
| Probe/Initialize), read directly from HID. |
\*-----------------------------------------------------*/
if(reader_running.load())
{
return ReadFromQueue(feat_idx_out, function_out, data_out, data_max, timeout_ms);
}
return ReadHIDDirect(feat_idx_out, function_out, data_out, data_max, timeout_ms);
}
int LogitechHIDPP20Controller::ReadHIDDirect
(
uint8_t* feat_idx_out,
uint8_t* function_out,
uint8_t* data_out,
size_t data_max,
int timeout_ms
)
{
switch(transport.type)
{
case HIDPP20_TRANSPORT_CENTURION:
return ReadCenturionDirect(feat_idx_out, function_out, data_out, data_max, timeout_ms);
case HIDPP20_TRANSPORT_STANDARD:
default:
return ReadStandardDirect(feat_idx_out, function_out, data_out, data_max, timeout_ms);
}
}
int LogitechHIDPP20Controller::ReadFromQueue
(
uint8_t* feat_idx_out,
uint8_t* function_out,
uint8_t* data_out,
size_t data_max,
int timeout_ms
)
{
std::unique_lock<std::mutex> lock(response_mutex);
std::chrono::steady_clock::time_point deadline = std::chrono::steady_clock::now()
+ std::chrono::milliseconds(timeout_ms);
while(response_queue.empty())
{
if(response_cv.wait_until(lock, deadline) == std::cv_status::timeout)
{
/*---------------------------------------------*\
| Offline detection lives at the |
| SendAcked layer now: one tick per |
| fully-failed call, not per per-attempt |
| read window. Streaming policies that |
| retry several times don't artificially |
| accelerate the offline declaration. |
\*---------------------------------------------*/
return 0;
}
if(!reader_running.load())
{
return 0;
}
/*-------------------------------------------------*\
| Teardown notifies this cv so blocked readers |
| return immediately instead of waiting out their |
| read windows on a device being torn down. |
\*-------------------------------------------------*/
if(teardown_pending.load())
{
return 0;
}
}
HIDPP20RawMessage msg = response_queue.front();
response_queue.pop_front();
if(feat_idx_out)
{
*feat_idx_out = msg.feat;
}
if(function_out)
{
*function_out = msg.func;
}
if(data_out && data_max > 0)
{
size_t copy_len = (data_max > sizeof(msg.data)) ? sizeof(msg.data) : data_max;
memcpy(data_out, msg.data, copy_len);
}
return msg.result;
}
/*---------------------------------------------------------*\
| Sleep delay_ms in slices, waking early when the link is |
| about to change or the device went offline. Returns false |
| when interrupted. |
\*---------------------------------------------------------*/
bool LogitechHIDPP20Controller::InterruptibleBackoff(uint16_t delay_ms)
{
std::chrono::steady_clock::time_point deadline =
std::chrono::steady_clock::now() + std::chrono::milliseconds(delay_ms);
while(true)
{
if(teardown_pending.load() || !device_online.load())
{
return false;
}
std::chrono::steady_clock::time_point now = std::chrono::steady_clock::now();
if(now >= deadline)
{
return true;
}
int remaining = (int)std::chrono::duration_cast<std::chrono::milliseconds>(
deadline - now).count();
std::this_thread::sleep_for(
std::chrono::milliseconds(remaining < 50 ? remaining : 50));
}
}
int LogitechHIDPP20Controller::SendAndReceive
(
uint8_t feat_idx,
uint8_t function,
const uint8_t* send_data,
size_t send_len,
uint8_t* recv_data,
size_t recv_max
)
{
/*-----------------------------------------------------*\
| Thin wrapper around SendAcked with the reliable |
| policy. Preserved as a named entry point so |
| existing call sites don't need to be touched. |
\*-----------------------------------------------------*/
return SendAcked(feat_idx, function,
send_data, send_len,
recv_data, recv_max,
HIDPP20_POLICY_RELIABLE);
}
int LogitechHIDPP20Controller::SendAcked
(
uint8_t feat_idx,
uint8_t function,
const uint8_t* send_data,
size_t send_len,
uint8_t* recv_data,
size_t recv_max,
const HIDPP20RetryPolicy& policy,
uint8_t* hidpp20_error_out
)
{
/*-----------------------------------------------------*\
| Send-and-ack with policy-driven retry: 7-attempt |
| exponential backoff for reliable one-shot |
| commands, tight 2-attempt for streaming frames. |
| Per attempt: sleep backoff_ms[i]; bail if |
| offline; send (wire errors retry); read within |
| read_window_ms: |
| matching response -> success |
| our error: BUSY and retry_on_busy -> resend |
| any other code -> fail (-1) |
| foreign error / non-matching frame -> discard |
| read timeout -> resend |
| |
| The flush below empties the shared response queue, |
| so this call must be the only transaction on the |
| wire while it runs. See TransactionMutex(). |
\*-----------------------------------------------------*/
std::lock_guard<std::recursive_mutex> transaction_guard(transaction_mutex);
if(hidpp20_error_out)
{
*hidpp20_error_out = 0;
}
if(policy.flush_before)
{
FlushResponseQueue();
}
int last_result = 0;
uint8_t last_error = 0;
for(uint8_t attempt = 0; attempt < policy.attempts; attempt++)
{
/*-------------------------------------------------*\
| Backoff before each attempt (0 on first). |
| Sliced so teardown interrupts the wait, the |
| checks below then end the call. |
\*-------------------------------------------------*/
uint16_t delay_ms = policy.backoff_ms[attempt];
if(delay_ms > 0)
{
InterruptibleBackoff(delay_ms);
}
/*-------------------------------------------------*\
| Bail early if device went offline mid-retry |
\*-------------------------------------------------*/
if(!device_online.load())
{
return 0;
}
/*-------------------------------------------------*\
| Bail if teardown started: reliable-policy |
| retries against a device being torn down delay |
| shutdown by seconds. |
\*-------------------------------------------------*/
if(teardown_pending.load())
{
LOG_TRACE("%s SendAcked[%s] abandoned, link change pending",
LOG_TAG, policy.name);
return 0;
}
int send_result = SendMessage(feat_idx, function, send_data, send_len);
if(send_result < 0)
{
LOG_DEBUG("%s SendAcked[%s] wire send failed (attempt %d, result=%d) "
"feat=0x%02X func=0x%02X",
LOG_TAG, policy.name, attempt, send_result, feat_idx, function);
last_result = -2;
continue;
}
/*-------------------------------------------------*\
| Read loop bounded by per-attempt window. |
| Drain non-matching HID++ frames within |
| this window; they are stale responses or |
| unrelated events from prior commands. Only |
| retry the send if the window expires with |
| no match (lost on wire) or we got BUSY. |
\*-------------------------------------------------*/
std::chrono::steady_clock::time_point window_deadline = std::chrono::steady_clock::now()
+ std::chrono::milliseconds(policy.read_window_ms);
bool need_resend = false;
while(!need_resend)
{
if(teardown_pending.load())
{
LOG_TRACE("%s SendAcked[%s] abandoned, link change pending",
LOG_TAG, policy.name);
return 0;
}
std::chrono::steady_clock::time_point now = std::chrono::steady_clock::now();
if(now >= window_deadline)
{
LOG_TRACE("%s SendAcked[%s] window expired (attempt %d)",
LOG_TAG, policy.name, attempt);
last_result = 0;
break;
}
int remaining = (int)std::chrono::duration_cast<std::chrono::milliseconds>(
window_deadline - now).count();
if(remaining <= 0)
{
last_result = 0;
break;
}
uint8_t resp_feat = 0;
uint8_t resp_func = 0;
uint8_t resp_data[60] = {};
int rd = ReadMessage(&resp_feat, &resp_func,
resp_data, sizeof(resp_data),
remaining);
if(rd < 0)
{
/* Wire error, propagate, don't retry */
return -2;
}
if(rd == 0)
{
/* Window drained with nothing matching, retry the send */
last_result = 0;
break;
}
/*---------------------------------------------*\
| HID++ error frame |
| feat=0xFF, func=err_feat, data[0]=err_func, |
| data[1]=err_code |
\*---------------------------------------------*/
if(resp_feat == 0xFF)
{
uint8_t err_feat = resp_func;
uint8_t err_func = resp_data[0];
uint8_t err_code = resp_data[1];
/*-----------------------------------------*\
| Match: either a direct error for our |
| request, or a Centurion bridge error |
| attributed to the bridge feature index |
| when we're routing through it. The bridge |
| swallows the sub-device feat in the error |
| response, so all bridge-routed failures |
| look like errors from the bridge. |
\*-----------------------------------------*/
bool is_our_error =
(err_feat == feat_idx &&
(err_func & 0xF0) == (function & 0xF0) &&
(err_func & 0x0F) == HIDPP20_SW_ID)
|| (transport.bridge_feat_idx != 0 &&
err_feat == transport.bridge_feat_idx);
if(is_our_error)
{
if(err_code == 0x08 && policy.retry_on_busy)
{
/* BUSY: retry the send after backoff */
LOG_TRACE("%s SendAcked[%s] BUSY (attempt %d) feat=0x%02X func=0x%02X",
LOG_TAG, policy.name, attempt, feat_idx, function);
last_error = 0x08;
last_result = 0;
need_resend = true;
continue;
}
/* Non-BUSY HID++ error: hard fail */
LOG_DEBUG("%s SendAcked[%s] LogitechHID++ error 0x%02X "
"feat=0x%02X func=0x%02X",
LOG_TAG, policy.name, err_code, feat_idx, function);
/*-------------------------------------*\
| Kept for the cache self-heal: |
| 0x06/0x07 is a stale restored index. |
\*-------------------------------------*/
last_fap_error_ = err_code;
if(hidpp20_error_out)
{
*hidpp20_error_out = err_code;
}
return -1;
}
/* Error for a different request, stale, discard and keep reading */
continue;
}
/*---------------------------------------------*\
| Match the software id too; it is the |
| only thing tying a HID++ reply to its |
| requester. Without it, replies to any |
| other program on this device (Solaar |
| cycles 0x02..0x0F) are accepted as |
| ours: same feature, same function. |
\*---------------------------------------------*/
if(resp_feat == feat_idx &&
(resp_func & 0xF0) == (function & 0xF0) &&
(resp_func & 0x0F) == HIDPP20_SW_ID)
{
if(recv_data && recv_max > 0)
{
size_t copy = (recv_max > sizeof(resp_data))
? sizeof(resp_data) : recv_max;
memcpy(recv_data, resp_data, copy);
}
if(attempt > 0)
{
LOG_DEBUG("%s SendAcked[%s] succeeded on attempt %d "
"feat=0x%02X func=0x%02X",
LOG_TAG, policy.name, attempt, feat_idx, function);
}
consecutive_timeouts.store(0);
return rd;
}
/* Non-matching, non-error: stale unrelated frame, keep reading */
}
}
LOG_DEBUG("%s SendAcked[%s] exhausted %d attempts feat=0x%02X func=0x%02X "
"(last_error=0x%02X)",
LOG_TAG, policy.name, (int)policy.attempts,
feat_idx, function, last_error);
if(hidpp20_error_out)
{
*hidpp20_error_out = last_error;
}
/*-----------------------------------------------------*\
| Offline detection: tick once per fully-failed call |
| (all retry attempts exhausted with no response). At a |
| threshold of 10 we declare the device gone. Reset to |
| 0 happens on any successful call (above), single |
| delayed responses don't push us toward offline. |
\*-----------------------------------------------------*/
if(last_result == 0)
{
int timeouts = ++consecutive_timeouts;
if(timeouts >= 10 && device_online.load())
{
LOG_DEBUG("%s Device appears offline (%d consecutive failed calls)",
LOG_TAG, timeouts);
device_online.store(false);
}
}
return last_result;
}
int LogitechHIDPP20Controller::SendAckedIntoFAP
(
uint8_t feat_idx,
uint8_t function,
const uint8_t* send_data,
size_t send_len,
blankFAPmessage& response,
const HIDPP20RetryPolicy& policy
)
{
/*-----------------------------------------------------*\
| Compatibility shim for callers that inherited |
| the SendLong+ReadResponse interface and |
| inspect response.data[] downstream. Calls |
| SendAcked into a local buffer, then |
| reconstructs a blankFAPmessage on success. |
\*-----------------------------------------------------*/
response.init();
/*-----------------------------------------------------*\
| Pipelined claim: fire the write, record it, don't |
| block. VerifyClaimPipeline reconciles and re-sends |
| any miss; claim commands ignore their response. |
\*-----------------------------------------------------*/
if(pipelining_claim_)
{
int wr = SendMessage(feat_idx, function, send_data, send_len);
if(wr > 0 && claim_pipeline_.size() < 16)
{
HIDPP20PendingClaimCmd cmd;
cmd.feat = feat_idx;
cmd.func = function;
cmd.len = (send_len > sizeof(cmd.data)) ? sizeof(cmd.data) : send_len;
if(send_data != nullptr && cmd.len > 0)
{
memcpy(cmd.data, send_data, cmd.len);
}
claim_pipeline_.push_back(cmd);
}
return wr;
}
uint8_t recv[60] = {};
int result = SendAcked(feat_idx, function,
send_data, send_len,
recv, sizeof(recv),
policy);
if(result > 0)
{
response.report_id = LOGITECH_LONG_MESSAGE;
response.device_index = device_index;
response.feature_index = feat_idx;
response.feature_command = function;
memcpy(response.data, recv, sizeof(response.data));
}
return result;
}
/*---------------------------------------------------------*\
| Standard HID++ transport (0xFF00 / 0xFF43) |
| Report IDs 0x10 (7 bytes) / 0x11 (20 bytes) |
\*---------------------------------------------------------*/
/*---------------------------------------------------------*\
| Outgoing frame as hex, for trace-level wire comparison. |
\*---------------------------------------------------------*/
static std::string hex_frame(const uint8_t* buf, size_t len)
{
std::string out;
char byte[4];
for(size_t i = 0; i < len; i++)
{
snprintf(byte, sizeof(byte), "%02X ", buf[i]);
out += byte;
}
return out;
}
int LogitechHIDPP20Controller::SendStandard
(
uint8_t feat_idx,
uint8_t function,
const uint8_t* data,
size_t len
)
{
/*-----------------------------------------------------*\
| Auto-select short (0x10, 7 bytes) vs long |
| (0x11, 20 bytes) based on data length. |
| Upper layers just provide data; transport |
| picks the smallest frame that fits. |
| |
| Windows exception: HIDClass splits the HID++ short |
| and long message Top-Level Collections into separate |
| virtual HID devices (page 0xFF00 usage 1 vs usage 2). |
| We open the long- message TLC, which rejects 7-byte |
| writes. Force long format on Windows so every |
| outgoing frame matches the collection we opened, |
| Linux hidraw and macOS IOHIDManager expose both TLCs |
| through one handle and keep the size-based heuristic. |
\*-----------------------------------------------------*/
uint8_t buf[LOGITECH_LONG_MESSAGE_LEN];
size_t msg_len;
#if defined(_WIN32)
const bool prefer_short = false;
#else
const bool prefer_short = (len <= 3) && !long_only.load();
#endif
if(prefer_short)
{
memset(buf, 0, LOGITECH_SHORT_MESSAGE_LEN);
buf[0] = LOGITECH_SHORT_MESSAGE;
buf[1] = device_index;
buf[2] = feat_idx;
buf[3] = function | HIDPP20_SW_ID;
if(data && len > 0)
{
memcpy(buf + 4, data, len);
}
msg_len = LOGITECH_SHORT_MESSAGE_LEN;
}
else
{
memset(buf, 0, LOGITECH_LONG_MESSAGE_LEN);
buf[0] = LOGITECH_LONG_MESSAGE;
buf[1] = device_index;
buf[2] = feat_idx;
buf[3] = function | HIDPP20_SW_ID;
if(data && len > 0)
{
size_t copy_len = (len > 16) ? 16 : len;
memcpy(buf + 4, data, copy_len);
}
msg_len = LOGITECH_LONG_MESSAGE_LEN;
}
int result;
if(mutex)
{
std::lock_guard<std::mutex> lock(*mutex);
result = hid_write(dev, buf, msg_len);
}
else
{
result = hid_write(dev, buf, msg_len);
}
if(LogManager::get()->GetLogLevel() >= LL_TRACE)
{
LOG_TRACE("%s TX %s(result=%d)", LOG_TAG, hex_frame(buf, msg_len).c_str(), result);
}
/*-----------------------------------------------------*\
| A collection with no short report rejects the 0x10 |
| write (G560, G933). Resend as long and stay long. |
\*-----------------------------------------------------*/
if(result < 0 && msg_len == LOGITECH_SHORT_MESSAGE_LEN)
{
memset(buf, 0, LOGITECH_LONG_MESSAGE_LEN);
buf[0] = LOGITECH_LONG_MESSAGE;
buf[1] = device_index;
buf[2] = feat_idx;
buf[3] = function | HIDPP20_SW_ID;
if(data && len > 0)
{
memcpy(buf + 4, data, len);
}
if(mutex)
{
std::lock_guard<std::mutex> lock(*mutex);
result = hid_write(dev, buf, LOGITECH_LONG_MESSAGE_LEN);
}
else
{
result = hid_write(dev, buf, LOGITECH_LONG_MESSAGE_LEN);
}
if(LogManager::get()->GetLogLevel() >= LL_TRACE)
{
LOG_TRACE("%s TX %s(result=%d)", LOG_TAG, hex_frame(buf, LOGITECH_LONG_MESSAGE_LEN).c_str(), result);
}
if(result >= 0)
{
LOG_DEBUG("%s Short report rejected, using long frames", LOG_TAG);
long_only.store(true);
}
}
return result;
}
/*---------------------------------------------------------*\
| Feature 0x8080 very-long (report 0x12) frame: fn3 |
| SetKeyColors rides a 64-byte report that Windows HIDClass |
| splits onto a second Top-Level-Collection (usage 0x0604); |
| that handle is dev_perkey_vl; everything else stays on |
| dev. Layout matches the long report, just wider. |
| Fire-and-forget: the ACK lands on dev. |
\*---------------------------------------------------------*/
int LogitechHIDPP20Controller::SendVeryLongFrame
(
uint8_t feat_idx,
uint8_t function,
const uint8_t* data,
size_t len
)
{
const size_t max_payload = LOGITECH_VERY_LONG_MESSAGE_LEN - 4;
if(dev_perkey_vl == nullptr)
{
return -1;
}
uint8_t buf[LOGITECH_VERY_LONG_MESSAGE_LEN];
memset(buf, 0, sizeof(buf));
buf[0] = LOGITECH_VERY_LONG_MESSAGE;
buf[1] = device_index;
buf[2] = feat_idx;
buf[3] = function | HIDPP20_SW_ID;
if(data && len > 0)
{
size_t copy_len = (len > max_payload) ? max_payload : len;
memcpy(buf + 4, data, copy_len);
}
int result;
if(mutex)
{
std::lock_guard<std::mutex> lock(*mutex);
result = hid_write(dev_perkey_vl, buf, sizeof(buf));
}
else
{
result = hid_write(dev_perkey_vl, buf, sizeof(buf));
}
if(result < 0)
{
LOG_DEBUG("%s 0x8080 very-long frame write failed (result=%d) "
"feat=0x%02X func=0x%02X", LOG_TAG, result, feat_idx, function);
}
return result;
}
int LogitechHIDPP20Controller::ReadStandardDirect
(
uint8_t* feat_idx_out,
uint8_t* function_out,
uint8_t* data_out,
size_t data_max,
int timeout_ms
)
{
/*-----------------------------------------------------*\
| No mutex needed for reads, when the reader thread |
| is running, it is the sole caller. Before the |
| reader starts, all access is single-threaded. |
| |
| Loop within the timeout window draining non- |
| HID++ reports (mouse motion, keystrokes, media |
| keys, DJ events) until we either find a HID++ |
| short/long frame or actually time out. A high- |
| polling-rate device can put 50+ input reports |
| in the hidraw buffer between our calls; without |
| the drain loop the synchronous probe path can |
| never get past them to find its response. |
\*-----------------------------------------------------*/
std::chrono::steady_clock::time_point deadline = std::chrono::steady_clock::now()
+ std::chrono::milliseconds(timeout_ms);
int drained = 0;
while(true)
{
std::chrono::steady_clock::time_point now = std::chrono::steady_clock::now();
if(now >= deadline)
{
return 0;
}
int remaining_ms = (int)std::chrono::duration_cast<std::chrono::milliseconds>(
deadline - now).count();
if(remaining_ms <= 0)
{
return 0;
}
blankFAPmessage response;
response.init();
int result = hid_read_timeout(dev, response.buffer, response.size(), remaining_ms);
if(result < 0)
{
/* Real wire error (e.g. device removed). */
return result;
}
if(result == 0)
{
/* hidapi timeout, window expired with nothing pending. */
return 0;
}
/*-------------------------------------------------*\
| The hidraw also carries HID input reports. |
| Drop anything that is not a HID++ short (0x10), |
| long (0x11) or very-long (0x12) frame, or |
| keystrokes/motion get parsed as HID++ events. |
| Very-long matters: 0x8080 fn2 GetKeyColors |
| answers a long request with a 64-byte 0x12 |
| response (14 entries do not fit a long frame). |
| |
| Drop frames for a different device index: |
| receiver slots share one node, so sibling |
| replies and the receiver's own notifications |
| (index 0xFF) land here too, and SendAcked |
| matches only feature+function, so a foreign |
| frame would be accepted as our reply. |
\*-------------------------------------------------*/
if(response.buffer[0] == LOGITECH_SHORT_MESSAGE ||
response.buffer[0] == LOGITECH_LONG_MESSAGE ||
response.buffer[0] == LOGITECH_VERY_LONG_MESSAGE)
{
if(response.device_index != device_index)
{
LOG_TRACE("%s ReadStandardDirect: dropping frame for index 0x%02X (ours 0x%02X)",
LOG_TAG, response.device_index, device_index);
if(++drained > HIDPP20_READ_DRAIN_BUDGET)
{
LOG_DEBUG("%s ReadStandardDirect: drain budget (%d) exceeded",
LOG_TAG, HIDPP20_READ_DRAIN_BUDGET);
return 0;
}
continue;
}
}
if(response.buffer[0] != LOGITECH_SHORT_MESSAGE &&
response.buffer[0] != LOGITECH_LONG_MESSAGE &&
response.buffer[0] != LOGITECH_VERY_LONG_MESSAGE)
{
if(++drained > HIDPP20_READ_DRAIN_BUDGET)
{
LOG_DEBUG("%s ReadStandardDirect: drain budget (%d) exceeded",
LOG_TAG, HIDPP20_READ_DRAIN_BUDGET);
return 0;
}
continue;
}
if(feat_idx_out)
{
*feat_idx_out = response.feature_index;
}
if(function_out)
{
*function_out = response.feature_command;
}
if(data_out && data_max > 0)
{
size_t copy_len = (data_max > sizeof(response.data)) ? sizeof(response.data) : data_max;
memcpy(data_out, response.data, copy_len);
}
return result;
}
}
/*---------------------------------------------------------*\
| Centurion transport (0xFFA0) |
| |
| Wire format per protocol doc: |
| 0x51 (direct): [reportId] [cplLen] [flags] [featIdx] |
| [func|swid] [params...] |
| 0x50 (addressed): [reportId] [devAddr] [cplLen] [flags] |
| [featIdx] [func|swid] [params...] |
| |
| For sub-device access, the parent CentPPBridge wraps |
| sub-device messages: |
| params = [devId<<4|lenHi, lenLo, subCPL, subFeatIdx, |
| subFunc|swid, subParams...] |
| |
| Selects direct (0x50/0x51) or bridge-wrapped framing |
| based on transport; routes sub-devices via CentPPBridge. |
\*---------------------------------------------------------*/
int LogitechHIDPP20Controller::SendCenturion
(
uint8_t feat_idx,
uint8_t function,
const uint8_t* data,
size_t len
)
{
uint8_t buf[64];
memset(buf, 0, sizeof(buf));
if(transport.bridge_feat_idx != 0)
{
/*-------------------------------------------------*\
| Sub-device message routed through |
| CentPPBridge Parent message: feat=bridge, |
| func=sendFragment(0x10) Payload: |
| [devId<<4|lenHi, lenLo, subCPL=0x00, |
| subFeatIdx, subFunc|swid, subParams...] |
\*-------------------------------------------------*/
uint16_t sub_msg_len = 3 + (uint16_t)len; // subCPL + featIdx + func + data
if(transport.addressed)
{
buf[0] = transport.report_id;
buf[1] = transport.device_address;
buf[2] = 5 + sub_msg_len; // cplLen
buf[3] = 0x00; // flags (single fragment)
buf[4] = transport.bridge_feat_idx;
buf[5] = 0x10 | HIDPP20_SW_ID; // sendFragment (func 1)
buf[6] = (transport.sub_device_id << 4) | ((sub_msg_len >> 8) & 0x0F);
buf[7] = sub_msg_len & 0xFF;
buf[8] = 0x00; // sub-CPL (single fragment)
buf[9] = feat_idx;
buf[10] = function | HIDPP20_SW_ID;
if(data && len > 0)
{
memcpy(buf + 11, data, len);
}
}
else
{
buf[0] = transport.report_id;
buf[1] = 5 + sub_msg_len; // cplLen: flags(1) + feat(1) + func(1) + hdr(2) + sub
buf[2] = 0x00; // flags
buf[3] = transport.bridge_feat_idx;
buf[4] = 0x10 | HIDPP20_SW_ID; // sendFragment (func 1)
buf[5] = (transport.sub_device_id << 4) | ((sub_msg_len >> 8) & 0x0F);
buf[6] = sub_msg_len & 0xFF;
buf[7] = 0x00; // sub-CPL
buf[8] = feat_idx;
buf[9] = function | HIDPP20_SW_ID;
if(data && len > 0)
{
memcpy(buf + 10, data, len);
}
}
}
else
{
/*-------------------------------------------------*\
| Direct parent device message (no bridge) |
\*-------------------------------------------------*/
if(transport.addressed)
{
buf[0] = transport.report_id;
buf[1] = transport.device_address;
buf[2] = 3 + (uint8_t)len; // cplLen
buf[3] = 0x00; // flags
buf[4] = feat_idx;
buf[5] = function | HIDPP20_SW_ID;
if(data && len > 0)
{
memcpy(buf + 6, data, len);
}
}
else
{
buf[0] = transport.report_id;
buf[1] = 3 + (uint8_t)len; // cplLen: flags(1) + feat(1) + func(1) + data
buf[2] = 0x00; // flags
buf[3] = feat_idx;
buf[4] = function | HIDPP20_SW_ID;
if(data && len > 0)
{
memcpy(buf + 5, data, len);
}
}
}
int result;
if(mutex)
{
std::lock_guard<std::mutex> lock(*mutex);
result = hid_write(dev, buf, 64);
}
else
{
result = hid_write(dev, buf, 64);
}
return result;
}
int LogitechHIDPP20Controller::ReadCenturionDirect
(
uint8_t* feat_idx_out,
uint8_t* function_out,
uint8_t* data_out,
size_t data_max,
int timeout_ms
)
{
uint8_t buf[64];
memset(buf, 0, sizeof(buf));
/*-----------------------------------------------------*\
| Track an overall deadline so the bridge ACK + |
| MessageEvent two-read sequence stays within |
| timeout_ms total, without this each read could eat |
| the full budget independently. Drain non-Centurion |
| report IDs within the remaining window rather than |
| bailing on the first non-matching frame. |
\*-----------------------------------------------------*/
std::chrono::steady_clock::time_point deadline = std::chrono::steady_clock::now()
+ std::chrono::milliseconds(timeout_ms);
int drained = 0;
int result = 0;
while(true)
{
std::chrono::steady_clock::time_point now = std::chrono::steady_clock::now();
if(now >= deadline)
{
return 0;
}
int remaining_ms = (int)std::chrono::duration_cast<std::chrono::milliseconds>(
deadline - now).count();
if(remaining_ms <= 0)
{
return 0;
}
result = hid_read_timeout(dev, buf, sizeof(buf), remaining_ms);
if(result < 0)
{
return result;
}
if(result == 0)
{
return 0;
}
if(buf[0] == transport.report_id)
{
break;
}
if(++drained > HIDPP20_READ_DRAIN_BUDGET)
{
LOG_DEBUG("%s ReadCenturionDirect: drain budget (%d) exceeded",
LOG_TAG, HIDPP20_READ_DRAIN_BUDGET);
return 0;
}
}
/*-----------------------------------------------------*\
| Parse based on transport variant |
\*-----------------------------------------------------*/
int hdr_offset = transport.addressed ? 1 : 0; // skip device address byte
uint8_t cpl_len = buf[1 + hdr_offset];
// uint8_t cpl_flags = buf[2 + hdr_offset]; // for fragmentation support
uint8_t resp_feat = buf[3 + hdr_offset];
uint8_t resp_func = buf[4 + hdr_offset];
if(transport.bridge_feat_idx != 0 && resp_feat == transport.bridge_feat_idx)
{
/*-------------------------------------------------*\
| CentPPBridge: distinguish events from responses |
| |
| Bridge events (e.g. ConnectionStateChangedEvent) |
| have func high nibble = 0x00 (event index 0) and |
| swid = 0. These are NOT wrapped sub-device |
| responses; they are bridge-level notifications. |
| Return as-is so the reader thread detects them. |
| |
| Command responses use a two-response pattern: |
| 1. ACK: bridge echoes feat+func with our swid |
| 2. MessageEvent: func=1x, swid=0, wrapped |
| sub-device response |
\*-------------------------------------------------*/
if((resp_func & 0xF0) == 0x00 && (resp_func & 0x0F) != HIDPP20_SW_ID)
{
/*---------------------------------------------*\
| Bridge event, return feat/func/data as-is |
\*---------------------------------------------*/
if(feat_idx_out) *feat_idx_out = resp_feat;
if(function_out) *function_out = resp_func;
if(data_out && data_max > 0)
{
size_t avail = (size_t)(cpl_len > 2 ? cpl_len - 2 : 0);
size_t copy = (avail < data_max) ? avail : data_max;
memcpy(data_out, buf + 5 + hdr_offset, copy);
}
return result;
}
if((resp_func & 0x0F) == HIDPP20_SW_ID)
{
/*---------------------------------------------*\
| This is the ACK, discard and read the |
| MessageEvent Use the *remaining* window |
| from the overall deadline so the two- |
| read sequence stays bounded, and drain |
| non-Centurion frames within that window. |
\*---------------------------------------------*/
while(true)
{
std::chrono::steady_clock::time_point now = std::chrono::steady_clock::now();
if(now >= deadline)
{
return 0;
}
int remaining_ms = (int)std::chrono::duration_cast<std::chrono::milliseconds>(
deadline - now).count();
if(remaining_ms <= 0)
{
return 0;
}
memset(buf, 0, sizeof(buf));
result = hid_read_timeout(dev, buf, sizeof(buf), remaining_ms);
if(result < 0)
{
return result;
}
if(result == 0)
{
return 0;
}
if(buf[0] == transport.report_id)
{
break;
}
if(++drained > HIDPP20_READ_DRAIN_BUDGET)
{
LOG_DEBUG("%s ReadCenturionDirect: drain budget (%d) exceeded on bridge MessageEvent",
LOG_TAG, HIDPP20_READ_DRAIN_BUDGET);
return 0;
}
}
resp_feat = buf[3 + hdr_offset];
resp_func = buf[4 + hdr_offset];
if(resp_feat != transport.bridge_feat_idx)
{
/*-----------------------------------------*\
| Not a bridge response, return as-is |
\*-----------------------------------------*/
if(feat_idx_out) *feat_idx_out = resp_feat;
if(function_out) *function_out = resp_func;
if(data_out && data_max > 0)
{
size_t avail = (size_t)(buf[1 + hdr_offset] > 2 ? buf[1 + hdr_offset] - 2 : 0);
size_t copy = (avail < data_max) ? avail : data_max;
memcpy(data_out, buf + 5 + hdr_offset, copy);
}
return result;
}
}
/*-------------------------------------------------*\
| MessageEvent: unwrap sub-device response. |
| Bridge params: [devId<<4|lenHi, lenLo, subCPL, |
| subFeatIdx, subFunc|swid, subData...] |
\*-------------------------------------------------*/
int sub_offset = 5 + hdr_offset + 3; // past bridge header
resp_feat = buf[sub_offset];
resp_func = buf[sub_offset + 1];
if(feat_idx_out) *feat_idx_out = resp_feat;
if(function_out) *function_out = resp_func;
if(data_out && data_max > 0)
{
size_t avail = (size_t)(result - sub_offset - 2);
size_t copy = (avail < data_max) ? avail : data_max;
memcpy(data_out, buf + sub_offset + 2, copy);
}
}
else
{
/*-------------------------------------------------*\
| Direct response |
\*-------------------------------------------------*/
if(feat_idx_out) *feat_idx_out = resp_feat;
if(function_out) *function_out = resp_func;
if(data_out && data_max > 0)
{
size_t avail = (size_t)(cpl_len > 2 ? cpl_len - 2 : 0);
size_t copy = (avail < data_max) ? avail : data_max;
memcpy(data_out, buf + 5 + hdr_offset, copy);
}
}
(void)cpl_len;
return result;
}
/*---------------------------------------------------------*\
| Feature Discovery |
\*---------------------------------------------------------*/
uint8_t LogitechHIDPP20Controller::GetFeatureIndex(uint16_t feature_page,
const HIDPP20RetryPolicy& policy)
{
/*-----------------------------------------------------*\
| Check cache first, both Centurion bulk and |
| HID++ on-demand lookups store results here. |
\*-----------------------------------------------------*/
std::map<uint16_t, uint8_t>::const_iterator it = caps.feature_map.find(feature_page);
if(it != caps.feature_map.end())
{
return it->second;
}
/*-----------------------------------------------------*\
| Centurion bulk enumeration is complete, so a |
| feature not in the map does not exist. No wire |
| query is needed. |
\*-----------------------------------------------------*/
if(caps.feature_map_complete)
{
return 0;
}
/*-----------------------------------------------------*\
| Standard HID++: on-demand IRoot query, result cached. |
\*-----------------------------------------------------*/
uint8_t send_data[2];
send_data[0] = (feature_page >> 8) & 0xFF;
send_data[1] = feature_page & 0xFF;
uint8_t recv_data[16] = {};
int result = SendAcked(LOGITECH_HIDPP_PAGE_ROOT_IDX, FN_8071_GET_INFO,
send_data, 2, recv_data, sizeof(recv_data),
policy);
if(result > 0)
{
uint8_t index = recv_data[0];
uint8_t version = recv_data[2];
if(index != 0)
{
caps.feature_map[feature_page] = index;
caps.feature_versions[feature_page] = version;
}
if(index != 0)
{
LOG_DEBUG("%s Feature 0x%04X V%u -> index 0x%02X",
LOG_TAG, feature_page, version, index);
if(!FeatureVersionIsObserved(feature_page, version))
{
LOG_INFO("%s Feature 0x%04X V%u not previously observed, "
"tripwire for version-gated behavior",
LOG_TAG, feature_page, version);
}
}
else
{
/*---------------------------------------------*\
| The device answered: absent is an answer, |
| cache it. |
\*---------------------------------------------*/
caps.feature_map[feature_page] = 0;
LOG_DEBUG("%s Feature 0x%04X not present", LOG_TAG, feature_page);
}
return index;
}
/*-----------------------------------------------------*\
| No answer describes the link, not the feature: do not |
| cache it, or retries would answer from the map. |
\*-----------------------------------------------------*/
LOG_DEBUG("%s Feature 0x%04X did not answer", LOG_TAG, feature_page);
return 0;
}
/*---------------------------------------------------------*\
| Return the protocol version byte for a feature, or 0 if |
| the feature isn't present in this device's feature set. |
| Populated alongside feature_map during EnumerateFeatures |
| (Centurion bulk) or GetFeatureIndex (standard HID++ |
| on-demand IRoot.GetFeature). |
\*---------------------------------------------------------*/
uint8_t LogitechHIDPP20Controller::GetFeatureVersion(uint16_t feature_page) const
{
std::map<uint16_t, uint8_t>::const_iterator it = caps.feature_versions.find(feature_page);
if(it != caps.feature_versions.end())
{
return it->second;
}
return 0;
}
/*---------------------------------------------------------*\
| Feature/version summary in `solaar show` style, scoped |
| to the features this controller uses, so firmware that |
| moved or re-versioned one can be identified from the |
| log alone. GetFeatureIndex also logs a tripwire for |
| versions not seen before. Most entries are already |
| cached; this adds at most a few IRoot queries. |
\*---------------------------------------------------------*/
void LogitechHIDPP20Controller::LogFeatureSummary()
{
static const struct
{
uint16_t page;
const char* name;
} relevant_features[] =
{
{ HIDPP20_FEAT_FEATURE_SET, "FEATURE_SET" },
{ HIDPP20_FEAT_FIRMWARE_INFO, "FIRMWARE_INFO/BRIDGE" },
{ HIDPP20_FEAT_DISABLE_KEYS_BY_USAGE, "DISABLE_KEYS_BY_USAGE" },
{ HIDPP20_FEAT_COLOR_LED_EFFECTS, "COLOR_LED_EFFECTS" },
{ HIDPP20_FEAT_RGB_EFFECTS, "RGB_EFFECTS" },
{ HIDPP20_FEAT_PER_KEY_LIGHTING_V1, "PER_KEY_LIGHTING_V1" },
{ HIDPP20_FEAT_PER_KEY_LIGHTING_V2, "PER_KEY_LIGHTING_V2" },
{ HIDPP20_FEAT_KEYBOARD_LAYOUT, "KEYBOARD_LAYOUT" },
{ HIDPP20_FEAT_ONBOARD_PROFILES, "ONBOARD_PROFILES" },
{ HIDPP20_FEAT_PROFILE_MANAGEMENT, "PROFILE_MANAGEMENT" },
{ HIDPP20_FEAT_CENTURION_RGB, "CENTURION_RGB_0x0600" },
{ HIDPP20_FEAT_HEADSET_RGB_HOSTMODE, "HEADSET_RGB_HOSTMODE" },
{ HIDPP20_FEAT_WIRELESS_STATUS, "WIRELESS_STATUS" },
};
LOG_DEBUG("%s ===== HID++ 2.0 feature summary (features OpenRGB uses) =====", LOG_TAG);
for(size_t i = 0; i < sizeof(relevant_features) / sizeof(relevant_features[0]); i++)
{
uint16_t page = relevant_features[i].page;
uint8_t idx = GetFeatureIndex(page);
if(idx != 0)
{
LOG_DEBUG("%s feature 0x%04X %-22s present idx=0x%02X V%u",
LOG_TAG, page, relevant_features[i].name, idx, GetFeatureVersion(page));
}
else
{
LOG_DEBUG("%s feature 0x%04X %-22s absent",
LOG_TAG, page, relevant_features[i].name);
}
}
LOG_DEBUG("%s ============================================================", LOG_TAG);
}
/*---------------------------------------------------------*\
| Read a Centurion sub-device's name via DeviceName |
| 0x0101 (bridge-routed). Handles both response |
| shapes Solaar does: inline [len, name...] in the |
| fn0 reply, or chunked [len] then fn1 fragments. |
| Returns false if 0x0101 is absent or yields |
| nothing. Mirrors Solaar get_name_centurion. |
\*---------------------------------------------------------*/
bool LogitechHIDPP20Controller::ReadCenturionDeviceName0101(std::string& out)
{
out.clear();
uint8_t idx = GetFeatureIndex(HIDPP20_FEAT_CENTURION_DEVICE_NAME);
if(idx == 0)
{
return false;
}
/*-----------------------------------------------------*\
| fn0 getName -> recv[0] = name length (+ inline bytes |
| on devices that return the whole name in one reply). |
\*-----------------------------------------------------*/
uint8_t recv[64] = {};
int rd = SendAcked(idx, 0x00, nullptr, 0, recv, sizeof(recv));
if(rd <= 0)
{
return false;
}
unsigned int name_length = recv[0];
LOG_DEBUG("%s 0x0101 getName: len=%u rd=%d raw=[%02X %02X %02X %02X %02X %02X %02X %02X]",
LOG_TAG, name_length, rd,
recv[0], recv[1], recv[2], recv[3], recv[4], recv[5], recv[6], recv[7]);
if(name_length == 0 || name_length > 64)
{
return false;
}
/*-----------------------------------------------------*\
| Use the fn0 reply inline when it already carries |
| the whole name (length covered and the byte after |
| it printable; rejects a chunked fn0 that returned |
| only length + zeros); else fetch in chunks via fn1. |
\*-----------------------------------------------------*/
if((unsigned int)rd >= 1u + name_length
&& name_length <= sizeof(recv) - 1
&& recv[1] >= 0x20 && recv[1] <= 0x7E)
{
out.assign((char*)recv + 1, name_length);
}
else
{
for(unsigned int offset = 0; offset < name_length; offset += 16)
{
uint8_t send_data[1] = { (uint8_t)offset };
uint8_t chunk[20] = {};
int cr = SendAcked(idx, 0x10, send_data, 1, chunk, sizeof(chunk));
if(cr <= 0)
{
break;
}
unsigned int chunk_len = name_length - offset;
if(chunk_len > 16)
{
chunk_len = 16;
}
out.append((char*)chunk, chunk_len);
}
}
while(!out.empty() && out.back() == '\0')
{
out.pop_back();
}
return !out.empty();
}
void LogitechHIDPP20Controller::DiscoverDeviceName()
{
/*-----------------------------------------------------*\
| Centurion sub-devices use 0x0101 (DeviceName). |
| Standard HID++ uses 0x0005 (DeviceNameType). |
\*-----------------------------------------------------*/
if(transport.type == HIDPP20_TRANSPORT_CENTURION)
{
/*-------------------------------------------------*\
| Try the HID++ name (0x0101) first so a |
| spec-compliant sub-device self-names; |
| fall back to the OS/USB name for hardware |
| that doesn't return a usable name there. |
\*-------------------------------------------------*/
std::string hidpp_name;
if(ReadCenturionDeviceName0101(hidpp_name) && LogitechHIDPP20Controller::NameLooksReal(hidpp_name))
{
caps.device_name = hidpp_name;
}
else
{
std::string friendly = GetCenturionSubDeviceName(location);
caps.device_name = friendly.empty() ? HIDPP20_NAME_PLACEHOLDER_CENTURION
: friendly;
}
LOG_VERBOSE("%s Device name (Centurion): %s", LOG_TAG, caps.device_name.c_str());
return;
}
uint8_t feat_idx = GetFeatureIndex(HIDPP20_FEAT_DEVICE_NAME_TYPE);
if(feat_idx == 0)
{
/*-------------------------------------------------*\
| No name feature, or the lookup for it failed. |
| Either way the receiver has already told us what |
| this device is called, use that before falling |
| back to a name that tells the user nothing. |
\*-------------------------------------------------*/
caps.device_name = LogitechHIDPP20Controller::NameLooksReal(pairing_name) ? pairing_name
: HIDPP20_NAME_PLACEHOLDER_STD;
LOG_WARNING("%s DeviceNameType (0x0005) not available, using '%s'",
LOG_TAG, caps.device_name.c_str());
return;
}
/*-----------------------------------------------------*\
| Rescan churn (notification bursts from the previous |
| session's teardown) can garble or time out the first |
| reads, so validate the length and retry the whole |
| discovery. Never leave the name blank, a failed read |
| falls back to the placeholder. |
\*-----------------------------------------------------*/
for(int attempt = 0; attempt < 3; attempt++)
{
uint8_t recv[16] = {};
int result = SendAcked(feat_idx, LOTITECH_CMD_DEVICE_NAME_TYPE_GET_COUNT,
nullptr, 0, recv, sizeof(recv));
if(result <= 0)
{
continue;
}
unsigned int name_length = recv[0];
if(name_length == 0 || name_length > 64)
{
LOG_DEBUG("%s GetCount returned implausible name length %u (attempt %d)",
LOG_TAG, name_length, attempt);
continue;
}
std::string name;
bool complete = true;
for(unsigned int offset = 0; offset < name_length; offset += 16)
{
uint8_t send_data[1] = { (uint8_t)offset };
result = SendAcked(feat_idx, LOGITECH_CMD_DEVICE_NAME_TYPE_GET_DEVICE_NAME,
send_data, 1, recv, sizeof(recv));
if(result <= 0)
{
complete = false;
break;
}
unsigned int chunk_len = name_length - offset;
if(chunk_len > 16)
{
chunk_len = 16;
}
name.append((char*)recv, chunk_len);
}
while(!name.empty() && name.back() == '\0')
{
name.pop_back();
}
/*-------------------------------------------------*\
| A garbled read can return the right |
| length but junk bytes. Require printable |
| ASCII, otherwise the device registers |
| under an unprintable name that reads as |
| blank and never matches a saved profile. |
\*-------------------------------------------------*/
if(!complete || !LogitechHIDPP20Controller::NameLooksReal(name))
{
LOG_DEBUG("%s Device name read attempt %d unusable (len=%zu), retrying",
LOG_TAG, attempt, name.size());
continue;
}
caps.device_name = name;
LOG_VERBOSE("%s Device name: %s", LOG_TAG, caps.device_name.c_str());
return;
}
/*-----------------------------------------------------*\
| Use the receiver-stored pairing codename, not the |
| generic placeholder, when the FAP name read fails. |
\*-----------------------------------------------------*/
caps.device_name = LogitechHIDPP20Controller::NameLooksReal(pairing_name) ? pairing_name
: HIDPP20_NAME_PLACEHOLDER_STD;
LOG_WARNING("%s Device name discovery failed after retries, using '%s'",
LOG_TAG, caps.device_name.c_str());
}
void LogitechHIDPP20Controller::DiscoverDeviceType()
{
/*-----------------------------------------------------*\
| Centurion sub-devices don't have 0x0005 |
| (DeviceNameType). Default to unknown, don't |
| assume device type from transport, as |
| Centurion may be used for future devices. |
\*-----------------------------------------------------*/
if(transport.type == HIDPP20_TRANSPORT_CENTURION)
{
caps.device_type = 0;
return;
}
uint8_t feat_idx = GetFeatureIndex(HIDPP20_FEAT_DEVICE_NAME_TYPE);
if(feat_idx == 0)
{
caps.device_type = LOGITECH_DEVICE_TYPE_MOUSE;
return;
}
/*-----------------------------------------------------*\
| Retry like the name read: a timed-out type read under |
| rescan churn would register a keyboard with a mouse |
| layout. |
\*-----------------------------------------------------*/
for(int attempt = 0; attempt < 3; attempt++)
{
uint8_t recv[16] = {};
int result = SendAcked(feat_idx, LOGITECH_CMD_DEVICE_NAME_TYPE_GET_TYPE,
nullptr, 0, recv, sizeof(recv));
if(result > 0)
{
caps.device_type = recv[0];
LOG_VERBOSE("%s Device type: %d", LOG_TAG, caps.device_type);
return;
}
}
caps.device_type = LOGITECH_DEVICE_TYPE_MOUSE;
LOG_WARNING("%s Device type discovery failed after retries, assuming mouse",
LOG_TAG);
}
void LogitechHIDPP20Controller::DiscoverTransport()
{
/*-----------------------------------------------------*\
| Detect transport type from usage page. |
| 0xFF00/0xFF43: Standard HID++ (0x10/0x11 reports) |
| 0xFFA0+: Centurion (64-byte CPL framing) |
\*-----------------------------------------------------*/
if(transport.usage_page == 0xFF00 || transport.usage_page == 0xFF43)
{
transport.type = HIDPP20_TRANSPORT_STANDARD;
return;
}
/*-----------------------------------------------------*\
| Centurion transport, determine variant by probing. |
| 0x51 = direct (PRO X 2), 0x50 = addressed (G522). The |
| report descriptor would tell us which report IDs |
| exist, but hid_get_report_descriptor is hidapi |
| 0.14.0+ only, so we probe instead: try 0x51 direct |
| first, then fall back to the robust 0x50 device- |
| address sweep. |
\*-----------------------------------------------------*/
transport.type = HIDPP20_TRANSPORT_CENTURION;
/*-----------------------------------------------------*\
| Probe 0x51 (direct). If the device answers a 0x51 |
| frame it speaks the direct variant, no device |
| address needed. |
\*-----------------------------------------------------*/
transport.report_id = 0x51;
transport.addressed = false;
uint8_t probe_buf[64] = {};
probe_buf[0] = 0x51;
probe_buf[1] = 3;
probe_buf[2] = 0x00;
probe_buf[3] = 0x00;
probe_buf[4] = 0x00 | HIDPP20_SW_ID;
int wr = hid_write(dev, probe_buf, 64);
if(wr > 0)
{
uint8_t resp_buf[64] = {};
int rd = hid_read_timeout(dev, resp_buf, sizeof(resp_buf), 500);
if(rd > 0 && resp_buf[0] == 0x51)
{
LOG_DEBUG("%s Centurion 0x51 (direct) from probe", LOG_TAG);
return;
}
}
/*-----------------------------------------------------*\
| No 0x51 reply: assume 0x50 (addressed) and find the |
| device address. |
\*-----------------------------------------------------*/
transport.report_id = 0x50;
transport.addressed = true;
transport.device_address = 0x00;
/*-----------------------------------------------------*\
| Device-address sweep. 0x50 frames carry a device |
| address byte; the device silently drops frames |
| addressed to the wrong ID, so we brute-force probe |
| every candidate with an IRoot fn1 GetProtocolVersion |
| ping. The first address to respond is taken, and the |
| real address is in resp_buf[1] of the reply. Mirrors |
| Solaar's probe_centurion_device_addr; see |
| CENTURION_PROBE_PER_ADDR_TIMEOUT_MS above for timing. |
| |
| Wire format per candidate: |
| [0x50, addr, 0x06, 0x00, 0x00, 0x10, 0x00, 0x00, |
| 0x00, zero-pad to 64] |
| where 0x06 = cpl_length (flags+payload), 0x10 = fn1 |
| GetProtocolVersion with sw_id=0. |
\*-----------------------------------------------------*/
bool addr_found = false;
unsigned probe_count = 0;
unsigned write_errors = 0;
for(unsigned addr = 0; addr < 256; addr++)
{
uint8_t sweep_buf[64] = {};
sweep_buf[0] = 0x50;
sweep_buf[1] = (uint8_t)addr;
sweep_buf[2] = 0x06;
sweep_buf[3] = 0x00;
sweep_buf[4] = 0x00;
sweep_buf[5] = 0x10;
int swr = hid_write(dev, sweep_buf, 64);
probe_count++;
if(swr <= 0)
{
write_errors++;
if(write_errors > 3)
{
LOG_DEBUG("%s Centurion 0x50 probe: too many write failures, aborting", LOG_TAG);
break;
}
continue;
}
uint8_t resp_buf[64] = {};
int rd = hid_read_timeout(dev, resp_buf, sizeof(resp_buf),
CENTURION_PROBE_PER_ADDR_TIMEOUT_MS);
if(rd >= 2 && resp_buf[0] == 0x50)
{
transport.device_address = resp_buf[1];
addr_found = true;
break;
}
}
if(addr_found)
{
LOG_INFO("%s Centurion 0x50 device_addr=0x%02X (after %u candidates)",
LOG_TAG, transport.device_address, probe_count);
}
else
{
LOG_DEBUG("%s Centurion 0x50 probe: no response from any of 256 candidates",
LOG_TAG);
}
}
void LogitechHIDPP20Controller::EnumerateFeatures(uint8_t feature_set_idx)
{
caps.feature_map.clear();
caps.feature_map_complete = false;
/*-----------------------------------------------------*\
| Root (0x0000) is always at index 0 |
\*-----------------------------------------------------*/
caps.feature_map[0x0000] = 0;
if(transport.type == HIDPP20_TRANSPORT_CENTURION)
{
/*-------------------------------------------------*\
| Centurion sub-device: CenturionFeatureSet fn1 |
| returns ALL features in one bulk response. |
| [count, (feat_hi, feat_lo, type, version) x N] |
\*-------------------------------------------------*/
uint8_t send_data[1] = { 0x00 };
uint8_t recv_data[60] = {};
int result = SendAcked(feature_set_idx, 0x10,
send_data, 1, recv_data, sizeof(recv_data));
if(result > 0)
{
uint8_t count = recv_data[0];
LOG_DEBUG("%s CenturionFeatureSet: %d features", LOG_TAG, count);
for(uint8_t i = 0; i < count && (1 + i * 4 + 3) < (int)sizeof(recv_data); i++)
{
int offset = 1 + i * 4;
uint16_t feat_id = ((uint16_t)recv_data[offset] << 8) | recv_data[offset + 1];
uint8_t feat_type = recv_data[offset + 2];
uint8_t feat_version = recv_data[offset + 3];
uint8_t feat_idx = i; // 0-based: bulk includes root at 0
caps.feature_map[feat_id] = feat_idx;
caps.feature_versions[feat_id] = feat_version;
LOG_DEBUG("%s [%2d] Feature 0x%04X V%u type=0x%02X",
LOG_TAG, feat_idx, feat_id, feat_version, feat_type);
if(!FeatureVersionIsObserved(feat_id, feat_version))
{
LOG_INFO("%s Feature 0x%04X V%u not previously observed, "
"tripwire for version-gated behavior",
LOG_TAG, feat_id, feat_version);
}
}
caps.feature_map_complete = true;
}
}
else
{
/*-------------------------------------------------*\
| Standard HID++: no bulk query available. |
| Features are looked up on-demand via |
| GetFeatureIndex (IRoot) and cached in |
| the feature map. Nothing to do here. |
\*-------------------------------------------------*/
return;
}
}
void LogitechHIDPP20Controller::DiscoverFirmwareInfo()
{
/*-----------------------------------------------------*\
| Centurion sub-devices use 0x0100 (DeviceInfo) |
| for firmware version and serial. Standard |
| HID++ uses 0x0003 (FirmwareInfo). |
\*-----------------------------------------------------*/
if(transport.type == HIDPP20_TRANSPORT_CENTURION)
{
uint8_t dev_info_idx = GetFeatureIndex(HIDPP20_FEAT_CENTURION_DEVICE_INFO);
if(dev_info_idx == 0)
{
return;
}
/*-------------------------------------------------*\
| fn1 getFirmwareVersion(entityIndex=0): |
| main firmware Response: [fwType, |
| additional, version_hi, version_lo] |
\*-------------------------------------------------*/
{
uint8_t send_data[1] = { 0x00 };
uint8_t recv_data[16] = {};
int result = SendAcked(dev_info_idx, 0x10,
send_data, 1, recv_data, sizeof(recv_data));
if(result > 0)
{
uint16_t version = ((uint16_t)recv_data[2] << 8) | recv_data[3];
char ver_str[32];
snprintf(ver_str, sizeof(ver_str), "%d.%d",
(version >> 8) & 0xFF, version & 0xFF);
caps.firmware_version = ver_str;
LOG_DEBUG("%s Firmware (Centurion): %s", LOG_TAG, caps.firmware_version.c_str());
}
}
/*-------------------------------------------------*\
| fn2 getSerialNumber on 0x0100 (DeviceInfo) |
| Response: [stringLen, serial...] |
\*-------------------------------------------------*/
{
uint8_t recv_data[16] = {};
int result = SendAcked(dev_info_idx, 0x20,
nullptr, 0, recv_data, sizeof(recv_data));
if(result > 0)
{
uint8_t slen = recv_data[0];
if(slen > 15) slen = 15;
char serial[16] = {};
memcpy(serial, &recv_data[1], slen);
/*-----------------------------------------*\
| A dongle with no stored serial reports a |
| length over zeroed bytes, stop at the |
| first non-printable so those stay empty. |
\*-----------------------------------------*/
for(uint8_t i = 0; i < slen; i++)
{
if(serial[i] < 0x21 || serial[i] > 0x7E)
{
serial[i] = '\0';
break;
}
}
caps.serial_number = serial;
LOG_DEBUG("%s Serial (Centurion): %s", LOG_TAG, caps.serial_number.c_str());
}
}
return;
}
uint8_t fw_idx = GetFeatureIndex(HIDPP20_FEAT_FIRMWARE_INFO);
if(fw_idx == 0)
{
return;
}
/*-----------------------------------------------------*\
| fn0 GetEntityCount: entity count, unitId, |
| transport PIDs Response: [count, |
| unitId(4), transport(2), PID1(2), PID2(2)] |
\*-----------------------------------------------------*/
uint8_t entity_count = 1;
{
uint8_t recv_data[16] = {};
int result = SendAcked(fw_idx, 0x00,
nullptr, 0, recv_data, sizeof(recv_data));
if(result > 0)
{
entity_count = recv_data[0];
/*---------------------------------------------*\
| Extract unitId, the stable hardware identity |
| across all paths (USB, wireless, dongle). |
\*---------------------------------------------*/
char uid[16];
snprintf(uid, sizeof(uid), "%02X%02X%02X%02X",
recv_data[1], recv_data[2], recv_data[3], recv_data[4]);
caps.unit_id = uid;
caps.pid_wireless = ((uint16_t)recv_data[7] << 8) | recv_data[8];
caps.pid_wired = ((uint16_t)recv_data[9] << 8) | recv_data[10];
caps.pid_third = ((uint16_t)recv_data[11] << 8) | recv_data[12];
/*---------------------------------------------*\
| Use unitId as serial if none is reported |
\*---------------------------------------------*/
if(caps.serial_number.empty() && caps.unit_id != "00000000")
{
caps.serial_number = caps.unit_id;
}
LOG_DEBUG("%s unitId=%s PID1=0x%04X PID2=0x%04X PID3=0x%04X",
LOG_TAG, caps.unit_id.c_str(), caps.pid_wireless, caps.pid_wired, caps.pid_third);
/*---------------------------------------------*\
| Resolve per-model quirks. The modelId |
| slots shift with the device's transports, |
| so match an entry against any slot. |
\*---------------------------------------------*/
caps.quirks = 0;
uint16_t device_pids[3] = { caps.pid_wireless, caps.pid_wired, caps.pid_third };
size_t quirk_table_len = sizeof(HIDPP20_DEVICE_QUIRK_TABLE)
/ sizeof(HIDPP20_DEVICE_QUIRK_TABLE[0]);
for(size_t q = 0; q < quirk_table_len; q++)
{
const HIDPP20DeviceQuirkEntry& entry = HIDPP20_DEVICE_QUIRK_TABLE[q];
for(size_t p = 0; p < 3; p++)
{
if(device_pids[p] != 0 &&
(entry.pid_wireless == device_pids[p] || entry.pid_wired == device_pids[p]))
{
caps.quirks |= entry.quirks;
break;
}
}
}
if(caps.quirks & HIDPP20_QUIRK_KEEP_ONBOARD_MODE)
{
LogitechHIDPP20IdleSettings::instance()->load();
if(LogitechHIDPP20IdleSettings::instance()->forceHostMode())
{
caps.quirks &= ~HIDPP20_QUIRK_KEEP_ONBOARD_MODE;
LOG_INFO("%s force_host_mode set: KEEP_ONBOARD_MODE quirk disabled",
LOG_TAG);
}
}
if(caps.quirks != 0)
{
LOG_DEBUG("%s Device quirks: 0x%08X", LOG_TAG, caps.quirks);
}
}
}
/*-----------------------------------------------------*\
| fn1 GetFwInfo: iterate entities to find main FW |
| (type 0) fwType lower nibble: 0=main, |
| 1=bootloader, 2=HW rev Response: fwType(1), |
| prefix(3), bcdVersion(2), bcdBuild(2) |
\*-----------------------------------------------------*/
for(uint8_t entity = 0; entity < entity_count && entity < 8; entity++)
{
uint8_t send_data[1] = { entity };
uint8_t recv_data[16] = {};
int result = SendAcked(fw_idx, 0x10,
send_data, 1, recv_data, sizeof(recv_data));
if(result <= 0)
{
continue;
}
uint8_t fw_type = recv_data[0] & 0x0F;
char prefix[4] = { (char)recv_data[1], (char)recv_data[2], (char)recv_data[3], '\0' };
uint8_t ver_major = recv_data[4];
uint8_t ver_minor = recv_data[5];
uint16_t build = ((uint16_t)recv_data[6] << 8) | recv_data[7];
char ver_str[64];
snprintf(ver_str, sizeof(ver_str), "%s %d.%d.%05u",
prefix, ver_major, ver_minor, build);
LOG_DEBUG("%s Firmware entity %d: type=%d %s", LOG_TAG, entity, fw_type, ver_str);
if(fw_type == 0)
{
caps.firmware_version = ver_str;
}
}
if(caps.firmware_version.empty())
{
LOG_DEBUG("%s No main firmware entity found", LOG_TAG);
}
/*-----------------------------------------------------*\
| fn2 GetDeviceSerialNumber: ASCII, up to 16 bytes |
\*-----------------------------------------------------*/
{
uint8_t recv_data[16] = {};
int result = SendAcked(fw_idx, 0x20,
nullptr, 0, recv_data, sizeof(recv_data));
if(result > 0)
{
char serial[17] = {};
memcpy(serial, recv_data, 16);
serial[16] = '\0';
/*---------------------------------------------*\
| Trim trailing nulls/spaces |
\*---------------------------------------------*/
for(int i = 15; i >= 0; i--)
{
if(serial[i] == '\0' || serial[i] == ' ')
{
serial[i] = '\0';
}
else
{
break;
}
}
if(serial[0] != '\0')
{
caps.serial_number = serial;
}
LOG_DEBUG("%s Serial: %s", LOG_TAG, caps.serial_number.c_str());
}
}
}
void LogitechHIDPP20Controller::DiscoverRGBEffects()
{
/*-----------------------------------------------------*\
| Try 0x8071, then 0x0600 (Centurion), then 0x8070 |
\*-----------------------------------------------------*/
caps.idx_rgb_effects = GetFeatureIndex(HIDPP20_FEAT_RGB_EFFECTS);
caps.rgb_feature_page = HIDPP20_FEAT_RGB_EFFECTS;
if(caps.idx_rgb_effects == 0)
{
caps.idx_rgb_effects = GetFeatureIndex(HIDPP20_FEAT_CENTURION_RGB);
caps.rgb_feature_page = HIDPP20_FEAT_CENTURION_RGB;
}
if(caps.idx_rgb_effects == 0)
{
caps.idx_rgb_effects = GetFeatureIndex(HIDPP20_FEAT_COLOR_LED_EFFECTS);
caps.rgb_feature_page = HIDPP20_FEAT_COLOR_LED_EFFECTS;
}
if(caps.idx_rgb_effects == 0)
{
caps.has_zone_effects = false;
return;
}
/*-----------------------------------------------------*\
| Resolve function IDs based on which feature |
| was found. 0x8071 and 0x0600 share the same |
| function layout. 0x8070 has different |
| function numbers and SW control format. |
\*-----------------------------------------------------*/
if(caps.rgb_feature_page == HIDPP20_FEAT_COLOR_LED_EFFECTS)
{
caps.fn_set_effect = 0x30;
caps.fn_sw_control = 0x80;
caps.fn_pwr_config = 0;
caps.fn_pwr_mode = 0;
caps.has_power_mgmt = false;
caps.sw_control_simple = true;
}
else
{
caps.fn_set_effect = 0x10;
caps.fn_sw_control = 0x50;
caps.fn_pwr_config = 0x70;
caps.fn_pwr_mode = 0x80;
caps.has_power_mgmt = true;
caps.sw_control_simple = false;
}
/*-----------------------------------------------------*\
| GetInfo: discover cluster count |
| 0x8071: data = [0xFF, 0xFF, 0x00] |
| 0x8070: data = [] (empty) |
\*-----------------------------------------------------*/
uint8_t data[3] = { 0xFF, 0xFF, 0x00 };
size_t data_len = (caps.rgb_feature_page == HIDPP20_FEAT_RGB_EFFECTS) ? 3 : 0;
blankFAPmessage response;
int result = SendAckedIntoFAP(caps.idx_rgb_effects, FN_8071_GET_INFO,
data, data_len, response);
if(result <= 0)
{
caps.has_zone_effects = false;
return;
}
unsigned int cluster_count;
if(caps.rgb_feature_page == HIDPP20_FEAT_RGB_EFFECTS)
{
cluster_count = response.data[2];
/*-----------------------------------------------------*\
| 0x8071 GetInfo response layout: |
| byte 2 numRgbZones |
| bytes 3-4 extendedCapabilities (BE16) |
| bytes 5-6 effectBlockCount (BE16) |
| byte 7 supportedClusterIndex |
| Logging the extra fields makes it easy to spot a |
| device whose enumerated effect list looks too short |
| relative to what it claims it can do. |
\*-----------------------------------------------------*/
uint16_t ext_caps = ((uint16_t)response.data[3] << 8) | response.data[4];
uint16_t effect_blocks = ((uint16_t)response.data[5] << 8) | response.data[6];
uint8_t supported_idx = response.data[7];
LOG_INFO("%s RGBEffects 0x8071 V%u GetInfo: zones=%u extCaps=0x%04X effectBlocks=%u supportedClusterIdx=%u",
LOG_TAG, GetFeatureVersion(caps.rgb_feature_page),
cluster_count, ext_caps, effect_blocks, supported_idx);
}
else
{
cluster_count = response.data[0];
LOG_INFO("%s RGB feature page=0x%04X V%u cluster_count=%u",
LOG_TAG, caps.rgb_feature_page,
GetFeatureVersion(caps.rgb_feature_page), cluster_count);
}
/*-----------------------------------------------------*\
| GetRgbClusterInfo for each cluster |
\*-----------------------------------------------------*/
for(unsigned int i = 0; i < cluster_count; i++)
{
HIDPP20ZoneCluster cluster;
cluster.index = i;
if(caps.rgb_feature_page == HIDPP20_FEAT_RGB_EFFECTS)
{
uint8_t query[2] = { (uint8_t)i, 0xFF };
result = SendAckedIntoFAP(caps.idx_rgb_effects, FN_8071_GET_INFO,
query, 2, response);
}
else
{
uint8_t query[2] = { (uint8_t)i, 0x00 };
result = SendAckedIntoFAP(caps.idx_rgb_effects, LOGITECH_CMD_RGB_EFFECTS_GET_INFO,
query, 2, response);
}
if(result <= 0)
{
continue;
}
if(caps.rgb_feature_page == HIDPP20_FEAT_RGB_EFFECTS)
{
cluster.location = (response.data[2] << 8) | response.data[3];
cluster.effect_count = response.data[4];
}
else
{
cluster.location = (response.data[1] << 8) | response.data[2];
cluster.effect_count = response.data[3];
}
LOG_INFO("%s Cluster %d: location=0x%04X effects=%d",
LOG_TAG, i, cluster.location, cluster.effect_count);
/*-------------------------------------------------*\
| GetEffectInfo for each effect in this cluster |
\*-------------------------------------------------*/
for(unsigned int j = 0; j < cluster.effect_count; j++)
{
HIDPP20Effect effect;
effect.index = j;
uint8_t eff_query[4] = { (uint8_t)i, (uint8_t)j, 0x00, 0x00 };
uint8_t eff_fn = (caps.rgb_feature_page == HIDPP20_FEAT_RGB_EFFECTS)
? FN_8071_GET_INFO : LOGITECH_FP8070_EFFECT_INFO;
result = SendAckedIntoFAP(caps.idx_rgb_effects, eff_fn,
eff_query, 4, response);
if(result <= 0)
{
continue;
}
/*---------------------------------------------*\
| 0x8070 GetZoneEffectInfo and 0x8071/0x0600 |
| GetEffectInfo share one response shape: |
| [0..1] echo (zone/cluster << 8 | effect |
| index) [2..3] effect type id [4..5] |
| capability bitmask [6..7] default period |
| (ms) G810-confirmed. The prior 0x8070 |
| layout read the echo at [0..1] as the id; |
| it only matched on zone 0. |
\*---------------------------------------------*/
effect.effect_id = (response.data[2] << 8) | response.data[3];
effect.capabilities = (response.data[4] << 8) | response.data[5];
effect.default_period = (response.data[6] << 8) | response.data[7];
LOG_INFO("%s Effect %d: id=0x%04X caps=0x%04X default_period=%dms "
"[raw %02X %02X %02X %02X %02X %02X %02X %02X]",
LOG_TAG, j, effect.effect_id, effect.capabilities, effect.default_period,
response.data[0], response.data[1], response.data[2], response.data[3],
response.data[4], response.data[5], response.data[6], response.data[7]);
cluster.effects.push_back(effect);
}
caps.zone_clusters.push_back(cluster);
}
/*-----------------------------------------------------*\
| 0x8070, trace level: read back each zone's |
| live effect before anything is claimed, the |
| onboard default is still running, so this |
| dumps real firmware effect settings (param |
| layouts for effects the docs don't cover). |
\*-----------------------------------------------------*/
if(caps.rgb_feature_page == HIDPP20_FEAT_COLOR_LED_EFFECTS
&& LogManager::get()->GetLogLevel() >= LL_TRACE)
{
for(const HIDPP20ZoneCluster& zc : caps.zone_clusters)
{
uint8_t zone = zc.index;
uint8_t fns[2] = { LOGITECH_FP8070_GET_EFFECT, LOGITECH_FP8070_GET_COLOUR };
for(int f = 0; f < 2; f++)
{
result = SendAckedIntoFAP(caps.idx_rgb_effects, fns[f], &zone, 1, response);
LOG_TRACE("%s zone %u fn 0x%02X readback (result=%d): "
"%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X",
LOG_TAG, zone, fns[f], result,
response.data[0], response.data[1], response.data[2], response.data[3],
response.data[4], response.data[5], response.data[6], response.data[7],
response.data[8], response.data[9], response.data[10], response.data[11],
response.data[12], response.data[13], response.data[14], response.data[15]);
}
}
}
caps.has_zone_effects = !caps.zone_clusters.empty();
/*-----------------------------------------------------*\
| Probe for device-firmware effect cards. Only defined |
| on the 0x8071 RGBEffects path: 0x8070 and 0x0600 |
| don't expose GetEffectSpecificInfo in the same form. |
\*-----------------------------------------------------*/
DiscoverEffectCards();
}
void LogitechHIDPP20Controller::DiscoverEffectCards()
{
/*---------------------------------------------------------*\
| Probes the device for the presence of firmware-resident |
| effect cards via 0x8071 fn0 GetEffectSpecificInfo. On |
| devices that have them (observed on G502 X PLUS), every |
| valid card returns a device-wide template byte pair at a |
| fixed position in page 1 of the response, the vendor app |
| reads those bytes and echoes them into the per-key prep |
| call's `SetEffectByIndex` params[6..7]. Our |
| implementation does the same. |
| |
| Request format for GetEffectSpecificInfo (0x8071 fn0): |
| [0xFF, effectIdHi, 0x01, effectIdLo, pageIndex] |
| |
| Response layout in blankFAPmessage::data[] terms (i.e. |
| starting AFTER the 4-byte HID++ header |
| report_id/dev_idx/feat_idx/func_byte): |
| |
| data[0..4] 5-byte prefix |
| [0] 0xFF echo of subfn marker |
| [1] echo of effectIdHi |
| [2] 0x01 echo of static constant |
| [3] 0x00 static zero (NOT an echo of effectIdLo) |
| [4] 0x00 static zero (NOT an echo of pageIndex) |
| data[5..15] 11-byte page payload |
| [5..6] header (0x00 0x00) |
| [7..8] firmware card ID (BE16; differs per card) |
| [9] pad |
| [10..11] device-wide template bytes (our target) |
| [12..15] trailing zeros |
| |
| Devices without effect cards return InvalidArgument for |
| any effectIdLo; we detect that as a non-positive result |
| and leave caps.has_effect_cards = false so the per-key |
| prep falls back to the Static-pass-through path. |
\*---------------------------------------------------------*/
caps.has_effect_cards = false;
caps.effect_card_template[0] = 0;
caps.effect_card_template[1] = 0;
if(caps.idx_rgb_effects == 0 ||
caps.rgb_feature_page != HIDPP20_FEAT_RGB_EFFECTS ||
!device_online.load())
{
return;
}
/*-----------------------------------------------------*\
| Query card at effectIdLo=0, page 1. Any |
| valid card works; the template bytes are |
| device-wide and identical across every card |
| on the device, so using card 0 is simplest. |
\*-----------------------------------------------------*/
uint8_t query[5] = { 0xFF, 0x00, 0x01, 0x00, 0x01 };
blankFAPmessage response;
int result = SendAckedIntoFAP(
caps.idx_rgb_effects,
FN_8071_GET_INFO,
query, sizeof(query),
response,
HIDPP20_POLICY_PROBE);
if(result <= 0)
{
LOG_DEBUG("%s DiscoverEffectCards: no effect cards on this device "
"(result=%d)", LOG_TAG, result);
return;
}
caps.has_effect_cards = true;
caps.effect_card_template[0] = response.data[10];
caps.effect_card_template[1] = response.data[11];
LOG_INFO("%s Effect cards present: template bytes = 0x%02X 0x%02X "
"(card firmware_id=0x%02X%02X, full data[0..15] = "
"%02X %02X %02X %02X %02X %02X %02X %02X "
"%02X %02X %02X %02X %02X %02X %02X %02X)",
LOG_TAG,
caps.effect_card_template[0], caps.effect_card_template[1],
response.data[7], response.data[8],
response.data[0], response.data[1], response.data[2],
response.data[3], response.data[4], response.data[5],
response.data[6], response.data[7], response.data[8],
response.data[9], response.data[10], response.data[11],
response.data[12], response.data[13], response.data[14],
response.data[15]);
}
/*---------------------------------------------------------*\
| Feature 0x0620 Headset RGB Hostmode (Centurion G522 / |
| PRO X 2). Separate feature from 0x8071/0x0600/0x8070; |
| no effect cards, no SetSWControl, no power management. |
| |
| Zone enumeration is best-effort from fn1 GetRGBZoneInfo. |
| Falls back to {0x00, 0x01} (two earcups) if decode fails. |
\*---------------------------------------------------------*/
void LogitechHIDPP20Controller::DiscoverHeadsetRGBHostmode()
{
caps.idx_headset_rgb_hostmode = GetFeatureIndex(HIDPP20_FEAT_HEADSET_RGB_HOSTMODE);
if(caps.idx_headset_rgb_hostmode == 0)
{
return;
}
LOG_INFO("%s 0x0620 V%u Headset RGB Hostmode present at feature index %u",
LOG_TAG,
GetFeatureVersion(HIDPP20_FEAT_HEADSET_RGB_HOSTMODE),
caps.idx_headset_rgb_hostmode);
/*-----------------------------------------------------*\
| Claim host mode (fn8) before reading zone info, |
| under firmware control GetRGBZoneInfo returns |
| count=0 (matches Solaar's discover_zones). Read |
| the prior mode (fn7) first and only claim if it |
| wasn't already host-controlled, so the restore |
| below puts it back exactly as we found it. |
\*-----------------------------------------------------*/
blankFAPmessage hm_prior_resp;
int prior_result = SendAckedIntoFAP(caps.idx_headset_rgb_hostmode,
FN_0620_GET_HOST_MODE_STATE,
nullptr, 0, hm_prior_resp);
int prior_mode = (prior_result > 0) ? hm_prior_resp.data[0] : -1;
bool claimed = false;
if(prior_mode != 0x01)
{
uint8_t hostmode_on = 0x01;
blankFAPmessage hm_claim_resp;
if(SendAckedIntoFAP(caps.idx_headset_rgb_hostmode,
FN_0620_SET_HOST_MODE_STATE,
&hostmode_on, 1, hm_claim_resp) > 0)
{
claimed = true;
}
}
/*-----------------------------------------------------*\
| fn1 GetRGBZoneInfo: empty request, returns a zone |
| list. Packing not pinned, log the raw response. |
\*-----------------------------------------------------*/
blankFAPmessage response;
int result = SendAckedIntoFAP(caps.idx_headset_rgb_hostmode,
FN_0620_GET_RGB_ZONE_INFO,
nullptr, 0, response);
caps.headset_rgb_hostmode_zone_ids.clear();
if(result > 0)
{
LOG_INFO("%s 0x0620 fn1 GetRGBZoneInfo raw: "
"%02X %02X %02X %02X %02X %02X %02X %02X "
"%02X %02X %02X %02X %02X %02X %02X %02X",
LOG_TAG,
response.data[0], response.data[1], response.data[2],
response.data[3], response.data[4], response.data[5],
response.data[6], response.data[7], response.data[8],
response.data[9], response.data[10], response.data[11],
response.data[12], response.data[13], response.data[14],
response.data[15]);
/*-------------------------------------------------*\
| First-pass decode: byte 0 = zone count, bytes |
| 1..N = zone IDs. Bounds-check against the 16-byte |
| data window. Refine once we see real G522 output. |
\*-------------------------------------------------*/
uint8_t zone_count = response.data[0];
if(zone_count > 0 && zone_count <= 15)
{
for(uint8_t i = 0; i < zone_count; i++)
{
caps.headset_rgb_hostmode_zone_ids.push_back(response.data[1 + i]);
}
}
}
else
{
LOG_DEBUG("%s 0x0620 fn1 GetRGBZoneInfo failed (result=%d)",
LOG_TAG, result);
}
/*-----------------------------------------------------*\
| Restore the prior host mode if we changed |
| it (Solaar's discover_zones finally- |
| block). The apply path re-claims host mode |
| on first paint via ClaimSWControlIfNeeded. |
\*-----------------------------------------------------*/
if(claimed && prior_mode >= 0)
{
uint8_t restore_mode = (uint8_t)prior_mode;
blankFAPmessage hm_restore_resp;
SendAckedIntoFAP(caps.idx_headset_rgb_hostmode,
FN_0620_SET_HOST_MODE_STATE, &restore_mode, 1,
hm_restore_resp);
}
if(caps.headset_rgb_hostmode_zone_ids.empty())
{
LOG_INFO("%s 0x0620 zone decode produced 0 zones, falling back to "
"{0x00, 0x01} (two-earcup layout)", LOG_TAG);
caps.headset_rgb_hostmode_zone_ids.push_back(0x00);
caps.headset_rgb_hostmode_zone_ids.push_back(0x01);
}
/*-----------------------------------------------------*\
| Synthesize a single zone cluster so the |
| existing RGBController zone UI lights up with |
| no special-casing. The 0x0620 path is static- |
| color-only; no effect cards, no per-key. One |
| cluster, one LED per discovered zone. |
\*-----------------------------------------------------*/
HIDPP20ZoneCluster cluster;
cluster.index = 0;
cluster.location = 0;
cluster.effect_count = 0;
caps.zone_clusters.clear();
caps.zone_clusters.push_back(cluster);
caps.is_headset_rgb_hostmode = true;
caps.has_zone_effects = true;
caps.rgb_feature_page = HIDPP20_FEAT_HEADSET_RGB_HOSTMODE;
/*-----------------------------------------------------*\
| Pin device type to HEADSET. 0x0620 presence is a |
| headset signal and Centurion sub-devices |
| otherwise show type=0. DiscoverDeviceType ran |
| earlier in the probe sequence, so pin it here |
| where we have the evidence. |
\*-----------------------------------------------------*/
caps.device_type = LOGITECH_DEVICE_TYPE_HEADSET;
LOG_INFO("%s 0x0620 ready: %zu zone(s), transient (FrameEnd 0x01) mode",
LOG_TAG, caps.headset_rgb_hostmode_zone_ids.size());
}
void LogitechHIDPP20Controller::DiscoverPerKeyZones()
{
/*-----------------------------------------------------*\
| 0x8081 (V2) only: 0x8080 (V1) is a separate |
| feature (DiscoverPerKey8080). Probing it with |
| 0x8081 functions misreads its GetInfo as a |
| zone bitmap, sets has_perkey, and fires the |
| 0x8081 FrameEnd path at a device without it. |
\*-----------------------------------------------------*/
caps.idx_perkey_v2 = GetFeatureIndex(HIDPP20_FEAT_PER_KEY_LIGHTING_V2);
uint8_t perkey_idx = caps.idx_perkey_v2;
if(perkey_idx == 0)
{
caps.has_perkey = false;
return;
}
/*-----------------------------------------------------*\
| Paginated GetInfo enumeration. |
| |
| typeOfInfo is a page index, not a redundant probe. |
| Per the 0x8081 spec the device's zone space is up to |
| 336 IDs organized as three pages of 112 bits each: |
| |
| zone_id = (page * 112) + (byte * 8) + bit |
| |
| An earlier version of this code only queried page 0 |
| on the assumption that all pages echoed the same |
| data. That was wrong, G515 TKL happened to |
| concentrate its zones in page 0 so the bug was |
| invisible, but devices with G-keys, lightbars, |
| media, or logo LEDs report those zones in pages 1 |
| and 2 and were being silently dropped. |
\*-----------------------------------------------------*/
caps.perkey_zone_ids.clear();
size_t page_counts[3] = { 0, 0, 0 };
for(uint8_t page = 0; page < 3; page++)
{
/*-------------------------------------------------*\
| Request body: uint16 BE typeOfInfo + 1 pad |
| byte. Short report carries the 3 bytes at |
| buf[4..6], so { 0x00, page, 0x00 } places |
| page in the low byte of the BE field. |
\*-------------------------------------------------*/
uint8_t query[3] = { 0x00, page, 0x00 };
blankFAPmessage response;
int result = SendAckedIntoFAP(perkey_idx, FN_8081_GET_INFO,
query, 3, response);
if(result <= 0)
{
continue;
}
/*-------------------------------------------------*\
| Parse 14-byte bitmap (bytes 2..15 of the |
| response). LSB-first bit order within |
| each byte. Skip zone 0 on page 0 (matches |
| prior behavior; zone 0 is not used). |
\*-------------------------------------------------*/
const uint8_t* bitmap = response.data + 2;
int start_bit = (page == 0) ? 1 : 0;
for(int bit_in_page = start_bit; bit_in_page < 112; bit_in_page++)
{
int byte_idx = bit_in_page / 8;
int bit_idx = bit_in_page % 8;
if(bitmap[byte_idx] & (1 << bit_idx))
{
uint16_t zone_id = (uint16_t)(page * 112 + bit_in_page);
/*-----------------------------------------*\
| Wire protocol 0x8081 Set* functions |
| take a uint8_t zone ID. Zones >255 |
| from the bitmap formula can't |
| actually be addressed, drop them so |
| we don't expose phantom LEDs. |
\*-----------------------------------------*/
if(zone_id > 255)
{
LOG_WARNING("%s Per-key GetInfo page %u reported "
"unreachable zone %u (wire protocol "
"caps zones at 255); ignoring",
LOG_TAG, page, zone_id);
continue;
}
caps.perkey_zone_ids.push_back(zone_id);
page_counts[page]++;
}
}
}
caps.has_perkey = !caps.perkey_zone_ids.empty();
/*-----------------------------------------------------*\
| Detect numpad presence from zone bitmask. Numpad |
| zones are 80-96 in Solaar's KEYCODES numbering. |
\*-----------------------------------------------------*/
caps.has_numpad = false;
for(uint16_t zid : caps.perkey_zone_ids)
{
if(zid >= 80 && zid <= 96)
{
caps.has_numpad = true;
break;
}
}
LOG_VERBOSE("%s Per-key zones discovered: %zu total "
"(page0=%zu, page1=%zu, page2=%zu, numpad=%s)",
LOG_TAG, caps.perkey_zone_ids.size(),
page_counts[0], page_counts[1], page_counts[2],
caps.has_numpad ? "yes" : "no");
}
/*---------------------------------------------------------*\
| fn2 GetKeyColors readback for one keyType, paginated in |
| 14-entry frames. expected_key_count > 0 (fn1 keyCount) |
| reads exactly ceil(count/14) pages, matching the official |
| app's walk. 0 is probe mode for the fn1-failure fallback: |
| page until a frame yields no live keyId, bounded by fn0 |
| maxKeyCount with a floor because maxKeyCount can be |
| misreported as 0 (seen on the G810). Skips the 4-byte |
| header, drops keyId==0 padding, appends live keyIds to |
| out_ids, returns the count. |
\*---------------------------------------------------------*/
size_t LogitechHIDPP20Controller::ReadPerKey8080Colors
(
uint8_t feat_idx,
uint16_t key_type,
uint16_t expected_key_count,
std::vector<uint8_t>& out_ids,
bool log_colors
)
{
size_t start_index = 0;
size_t guard_pages;
if(expected_key_count > 0)
{
guard_pages = ((size_t)expected_key_count + HIDPP20_8080_KEYS_PER_FRAME - 1)
/ HIDPP20_8080_KEYS_PER_FRAME;
}
else
{
/*-------------------------------------------------*\
| Probe mode: the found==0 break is the real |
| terminator, guard_pages only bounds the loop. |
\*-------------------------------------------------*/
guard_pages = (caps.perkey_8080_max_key_count / HIDPP20_8080_KEYS_PER_FRAME) + 4;
if(guard_pages < 16)
{
guard_pages = 16;
}
}
for(size_t page = 0; page < guard_pages; page++)
{
uint8_t query[5] =
{
(uint8_t)(key_type >> 8), (uint8_t)(key_type & 0xFF),
(uint8_t)(start_index >> 8), (uint8_t)(start_index & 0xFF),
0x00 /* persistenceOptions: default volatile */
};
uint8_t recv[60] = {};
int result = SendAcked(feat_idx, FN_8080_GET_KEY_COLORS, query, 5,
recv, sizeof(recv), HIDPP20_POLICY_PROBE);
if(result <= 8)
{
break; /* headers only / error / empty */
}
/*-------------------------------------------------*\
| result is the raw report length. Subtract the |
| 4-byte HID++ header, cap to the copied payload, |
| then skip fn2's own 4-byte response header. A |
| 64-byte 0x12 response carries exactly 14 |
| entries; the old result-based math read one |
| entry past the buffer. |
\*-------------------------------------------------*/
size_t payload = (size_t)result - 4;
if(payload > sizeof(recv))
{
payload = sizeof(recv);
}
size_t entries = (payload - 4) / 4;
size_t found = 0;
for(size_t e = 0; e < entries; e++)
{
const uint8_t* entry = recv + 4 + e * 4;
uint8_t key_id = entry[0];
if(key_id == 0)
{
continue; /* padding / empty slot */
}
out_ids.push_back(key_id);
found++;
if(log_colors)
{
LOG_DEBUG("%s keyType 0x%04X keyId 0x%02X = RGB(%02X,%02X,%02X)",
LOG_TAG, key_type, key_id, entry[1], entry[2], entry[3]);
}
}
if(found == 0)
{
break; /* exhausted this keyType */
}
start_index += HIDPP20_8080_KEYS_PER_FRAME;
}
return out_ids.size();
}
/*---------------------------------------------------------*\
| Feature 0x8080 (Per Key Lighting) discovery. Separate |
| from 0x8081: keys are (keyType u16 BE, keyId u8 = USB |
| HID usage on the keyboard keyType); SetKeyColors rides |
| the 0x12 very-long report. Walks the feature the way the |
| official app does: fn0 typeFlags is a bitmask of single- |
| bit keyTypes, fn1 GetKeyTypeInfo returns that keyType's |
| keyCount (u16 BE at byte 0; NOT a keyType echo), and fn2 |
| GetKeyColors pages the keyIds 14 per frame only where |
| keyCount >= 1. keyCount == 0 is a valid empty success. |
| One deviation: on an fn1 failure we probe fn2 directly, |
| because unlike the official app we have no out-of-band |
| key list to fall back on. Read-only: fn0/fn1/fn2, all |
| on dev. |
\*---------------------------------------------------------*/
void LogitechHIDPP20Controller::DiscoverPerKey8080()
{
caps.idx_perkey_8080 = 0;
caps.has_perkey_8080 = false;
caps.perkey_8080_type_flags = 0;
caps.perkey_8080_type_count = 0;
caps.perkey_8080_max_key_count = 0;
caps.perkey_8080_types.clear();
/*-----------------------------------------------------*\
| Discovery via IRoot, any version, no hardcoded index |
| fallback. If the device doesn't advertise 0x8080 the |
| path simply doesn't engage. |
\*-----------------------------------------------------*/
uint8_t idx = GetFeatureIndex(HIDPP20_FEAT_PER_KEY_LIGHTING_V1);
if(idx == 0)
{
LOG_DEBUG("%s 0x8080 Per Key Lighting not advertised by this device", LOG_TAG);
return;
}
caps.idx_perkey_8080 = idx;
/*-----------------------------------------------------*\
| fn0 GetInfo: typeFlags(u16 BE)@0, reserved@2, |
| keyTypeCount(u16 BE)@3, maxKeyCount(u16 BE)@5. |
\*-----------------------------------------------------*/
uint8_t info[20] = {};
int r0 = SendAcked(idx, FN_8080_GET_INFO, nullptr, 0,
info, sizeof(info), HIDPP20_POLICY_RELIABLE);
if(r0 <= 0)
{
LOG_DEBUG("%s 0x8080 idx=0x%02X fn0 GetInfo failed (r=%d), "
"feature advertised but unreadable", LOG_TAG, idx, r0);
return;
}
uint16_t raw_type_flags = (uint16_t)((info[0] << 8) | info[1]);
uint16_t key_type_count = (uint16_t)((info[3] << 8) | info[4]);
uint16_t max_key_count = (uint16_t)((info[5] << 8) | info[6]);
uint16_t type_flags = raw_type_flags;
/*-----------------------------------------------------*\
| G910 over-reports typeFlags bit 0x2; mask the logged |
| / oracle value only. The walk still visits the raw |
| bit and lets fn1/fn2 decide, so a real media keyType |
| is never dropped by the mask. |
\*-----------------------------------------------------*/
if(caps.quirks & HIDPP20_QUIRK_8080_OVERREPORTS_MEDIA)
{
type_flags &= ~0x0002;
}
caps.perkey_8080_type_flags = type_flags;
caps.perkey_8080_type_count = key_type_count;
caps.perkey_8080_max_key_count = max_key_count;
LOG_DEBUG("%s ===== 0x8080 Per Key Lighting structure dump =====", LOG_TAG);
LOG_DEBUG("%s idx=0x%02X typeFlags=0x%04X keyTypeCount=%u maxKeyCount=%u",
LOG_TAG, idx, type_flags, key_type_count, max_key_count);
/*-----------------------------------------------------*\
| Walk the set bits of typeFlags across the known |
| single-bit keyTypes (0x01 keyboard, 0x02 consumer/ |
| media, 0x04 G-keys, 0x08 buttons, 0x10 logo, 0x40 |
| indicators). Set bits outside the known six are |
| logged, never probed: the official app has no legend |
| for them either. |
\*-----------------------------------------------------*/
static const uint16_t known_key_types[] =
{
0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0040
};
uint16_t known_mask = 0;
for(uint16_t kt : known_key_types)
{
known_mask |= kt;
}
if(raw_type_flags & ~known_mask)
{
LOG_DEBUG("%s typeFlags sets unknown bit(s) 0x%04X; not probed",
LOG_TAG, (uint16_t)(raw_type_flags & ~known_mask));
}
for(uint16_t key_type : known_key_types)
{
if(!(raw_type_flags & key_type))
{
continue;
}
/*-------------------------------------------------*\
| fn1 GetKeyTypeInfo: keyCount(u16 BE)@0, param |
| bytes @2. keyCount == 0 is a valid empty success |
| (an advertised keyType with no keys), skip it |
| without treating it as an error. |
\*-------------------------------------------------*/
uint8_t q1[2] = { (uint8_t)(key_type >> 8), (uint8_t)(key_type & 0xFF) };
uint8_t resp1[16] = {};
int r1 = SendAcked(idx, FN_8080_GET_KEY_TYPE_INFO, q1, 2,
resp1, sizeof(resp1), HIDPP20_POLICY_PROBE);
bool fn1_ok = (r1 >= 2);
uint16_t key_count = fn1_ok ? (uint16_t)((resp1[0] << 8) | resp1[1]) : 0;
if(fn1_ok && key_count == 0)
{
LOG_DEBUG("%s keyType 0x%04X: fn1 keyCount=0, skipped",
LOG_TAG, key_type);
continue;
}
std::vector<uint8_t> key_ids;
size_t live;
if(fn1_ok)
{
live = ReadPerKey8080Colors(idx, key_type, key_count, key_ids, true);
}
else
{
/*---------------------------------------------*\
| Deviation from the official app: it has an |
| out-of-band key list and can drop a keyType |
| whose fn1 fails, we cannot, so probe fn2 |
| directly, bounded by fn0 maxKeyCount. |
\*---------------------------------------------*/
LOG_DEBUG("%s keyType 0x%04X: fn1 failed (r=%d), probing fn2 directly",
LOG_TAG, key_type, r1);
live = ReadPerKey8080Colors(idx, key_type, 0, key_ids, true);
}
if(live == 0)
{
LOG_DEBUG("%s keyType 0x%04X: advertised but no live keyIds%s",
LOG_TAG, key_type,
fn1_ok ? " (fn2 disagrees with fn1 keyCount)" : "");
continue;
}
HIDPP20PerKey8080Type entry;
entry.key_type = key_type;
entry.param[0] = fn1_ok ? resp1[2] : 0;
entry.param[1] = fn1_ok ? resp1[3] : 0;
entry.param[2] = fn1_ok ? resp1[4] : 0;
entry.key_ids = key_ids;
caps.perkey_8080_types.push_back(entry);
LOG_DEBUG("%s CONFIRMED keyType 0x%04X with %zu keyId(s)%s",
LOG_TAG, key_type, key_ids.size(),
fn1_ok ? "" : " (fn1 unavailable; fn2-probed)");
}
caps.has_perkey_8080 = !caps.perkey_8080_types.empty();
/*-----------------------------------------------------*\
| Numpad presence: full-size if any standard numpad HID |
| usage (0x53 NumLock .. 0x63 Keypad .) was enumerated; |
| drives FULL vs TKL matrix sizing in SetupZones8080. |
\*-----------------------------------------------------*/
for(size_t t = 0; t < caps.perkey_8080_types.size() && !caps.has_numpad; t++)
{
for(uint8_t key_id : caps.perkey_8080_types[t].key_ids)
{
if(key_id >= 0x53 && key_id <= 0x63)
{
caps.has_numpad = true;
break;
}
}
}
/*-----------------------------------------------------*\
| Diagnostic only: count advertised vs confirmed |
| keyTypes. The per-keyType lines above localise any |
| gap (empty keyCount, fn1 failure, fn2 disagreement). |
| Compared against the quirk-masked oracle value so |
| known over-reporters don't warn every scan. |
\*-----------------------------------------------------*/
unsigned int flag_count = 0;
for(int bit = 0; bit < 16; bit++)
{
if(type_flags & (1u << bit))
{
flag_count++;
}
}
if(caps.perkey_8080_types.size() != flag_count)
{
LOG_DEBUG("%s 0x8080 confirmed %zu keyType(s); typeFlags=0x%04X "
"advertises %u; see the per-keyType lines above for "
"which advertised keyType(s) yielded no keys.",
LOG_TAG, caps.perkey_8080_types.size(), type_flags, flag_count);
}
LOG_DEBUG("%s 0x8080 enumeration: %zu keyType(s) confirmed, has_perkey_8080=%s%s",
LOG_TAG, caps.perkey_8080_types.size(),
caps.has_perkey_8080 ? "yes" : "no",
(dev_perkey_vl == nullptr)
? " (NOTE: no 0x12 very-long handle, read-only, cannot paint)" : "");
}
void LogitechHIDPP20Controller::DiscoverKeyboardLayout()
{
uint8_t idx = GetFeatureIndex(HIDPP20_FEAT_KEYBOARD_LAYOUT);
if(idx == 0)
{
caps.keyboard_layout_code = 0;
return;
}
uint8_t recv_data[16] = {};
int result = SendAcked(idx, 0x00, nullptr, 0, recv_data, sizeof(recv_data));
if(result > 0)
{
caps.keyboard_layout_code = recv_data[0];
LOG_DEBUG("%s Keyboard layout code: %d", LOG_TAG, caps.keyboard_layout_code);
}
else
{
caps.keyboard_layout_code = 0;
}
}
/*---------------------------------------------------------*\
| Probe / Initialize / Shutdown |
\*---------------------------------------------------------*/
bool LogitechHIDPP20Controller::Probe()
{
LOG_DEBUG("%s Probing device at %s (index=0x%02X)",
LOG_TAG, location.c_str(), device_index);
/*-----------------------------------------------------*\
| Detect transport type from usage page |
| before anything else. Centurion devices |
| need different framing for all commands. |
\*-----------------------------------------------------*/
DiscoverTransport();
/*-----------------------------------------------------*\
| Flush any queued HID reports before probing. The |
| device may have unsolicited notifications (battery, |
| button events, etc.) sitting in the read buffer. |
\*-----------------------------------------------------*/
{
uint8_t flush_buf[64];
int flushed = 0;
while(flushed < 20)
{
int r = hid_read_timeout(dev, flush_buf, sizeof(flush_buf), 0);
if(r <= 0)
{
break;
}
flushed++;
}
if(flushed > 0)
{
LOG_DEBUG("%s Flushed %d queued reports", LOG_TAG, flushed);
}
}
/*-----------------------------------------------------*\
| Test IRoot by looking up a known feature. |
| |
| Standard HID++: look up FeatureSet (0x0001), must |
| exist. Centurion dongle: look up CentPPBridge |
| (0x0003), the dongle doesn't have FeatureSet, but |
| must have the bridge to reach the sub-device. |
| |
| Retry up to 3 times, wireless devices behind |
| a shared receiver can return stale responses. |
\*-----------------------------------------------------*/
uint8_t test_idx = 0;
/*-----------------------------------------------------*\
| A receiver-paired device is known to speak HID++, so |
| it gets the wider first-contact budget; an unknown |
| node keeps the tight probe and fails fast. |
\*-----------------------------------------------------*/
const HIDPP20RetryPolicy& first_contact = wireless
? HIDPP20_POLICY_FIRST_CONTACT
: HIDPP20_POLICY_PROBE;
if(transport.type == HIDPP20_TRANSPORT_CENTURION)
{
/*-------------------------------------------------*\
| Centurion: try CentPPBridge (0x0003) first |
| for dongle. If not found, try FeatureSet |
| (0x0001) for wired/direct connection where |
| the device IS the endpoint. |
| |
| This is the "is anyone there?" check, use the |
| fast- fail probe policy so non-Centurion or |
| unreachable devices bail in ~500ms instead of |
| ~6s. Once we have a positive response, |
| subsequent discovery uses reliable. |
\*-------------------------------------------------*/
test_idx = GetFeatureIndex(HIDPP20_FEAT_CENTPPBRIDGE, HIDPP20_POLICY_PROBE);
if(test_idx != 0)
{
transport.bridge_feat_idx = test_idx;
transport.sub_device_id = 0;
LOG_DEBUG("%s CentPPBridge at index %d: routing to sub-device",
LOG_TAG, test_idx);
/*---------------------------------------------*\
| Pre-check sub-device availability via |
| getConnectionInfo (CentPPBridge fn0). |
| The vendor app does this and refuses |
| to call sendFragment when MTU=0. |
| |
| Response format (from protocol doc |
| line 910-917): Byte 0: high nibble = |
| connection type/state low nibble + |
| Byte 1 = sub-device data length / |
| MTU Bytes 2+: sub-device descriptors |
| |
| If MTU == 0, no sub-device is connected. |
| Calling sendFragment in that state triggers |
| an undocumented error code 0x0B and wastes |
| the full retry budget. Skip enumeration and |
| let the dongle-watcher path take over until |
| ConnectionStateChangedEvent fires. |
| |
| Bridge is confirmed responsive at this point; |
| use reliable policy for the MTU check. |
\*---------------------------------------------*/
uint8_t mtu_recv[16] = {};
int mtu_result = SendAcked(test_idx, 0x00,
nullptr, 0,
mtu_recv, sizeof(mtu_recv));
if(mtu_result > 0)
{
transport.bridge_mtu =
((uint16_t)(mtu_recv[0] & 0x0F) << 8) | mtu_recv[1];
LOG_DEBUG("%s CentPPBridge MTU=%u (%s)",
LOG_TAG, transport.bridge_mtu,
transport.bridge_mtu > 0 ? "sub-device present"
: "no sub-device");
if(transport.bridge_mtu == 0)
{
/*-------------------------------------*\
| No sub-device, skip enumeration. |
| Mark the feature map complete so |
| on-demand lookups don't hit the |
| wire. The dongle will be |
| registered as a watcher and the |
| sub-device will be probed when |
| ConnectionStateChangedEvent fires. |
\*-------------------------------------*/
caps.feature_map_complete = true;
DiscoverDeviceName();
return true;
}
}
else
{
LOG_DEBUG("%s CentPPBridge getConnectionInfo failed (result=%d)",
LOG_TAG, mtu_result);
}
}
else
{
LOG_DEBUG("%s No CentPPBridge: Centurion direct connection", LOG_TAG);
test_idx = GetFeatureIndex(HIDPP20_FEAT_FEATURE_SET, first_contact);
}
}
else
{
/*-------------------------------------------------*\
| Standard HID++: probe FeatureSet (0x0001). The |
| policy retries on the wire; the outer loop adds a |
| buffer flush between bursts to clear stale |
| queued responses. |
\*-------------------------------------------------*/
for(int attempt = 0; attempt < 3 && test_idx == 0; attempt++)
{
if(attempt > 0)
{
uint8_t retry_buf[64];
while(hid_read_timeout(dev, retry_buf, sizeof(retry_buf), 10) > 0)
{
}
LOG_DEBUG("%s IRoot retry %d at %s", LOG_TAG, attempt + 1, location.c_str());
}
test_idx = GetFeatureIndex(HIDPP20_FEAT_FEATURE_SET, first_contact);
}
}
if(test_idx == 0)
{
LOG_DEBUG("%s IRoot probe failed at %s, device does not respond",
LOG_TAG, location.c_str());
return false;
}
/*-----------------------------------------------------*\
| If retries were needed, flush delayed responses from |
| failed attempts before continuing with discovery. |
\*-----------------------------------------------------*/
{
uint8_t post_buf[64];
while(hid_read_timeout(dev, post_buf, sizeof(post_buf), 10) > 0)
{
}
}
/*-----------------------------------------------------*\
| Enumerate all features in bulk. For standard |
| HID++, uses FeatureSet GetCount + GetFeatureId |
| loop. For Centurion sub-devices, uses bulk |
| GetFeatureId (single response). After this, |
| GetFeatureIndex uses the map, no wire traffic. |
\*-----------------------------------------------------*/
{
/*-------------------------------------------------*\
| For Centurion bridged, FeatureSet is at index 1 |
| on the sub-device. For standard HID++, test_idx |
| is the FeatureSet index from the IRoot probe. |
\*-------------------------------------------------*/
uint8_t fs_idx = (transport.type == HIDPP20_TRANSPORT_CENTURION &&
transport.bridge_feat_idx != 0)
? 1 // CenturionFeatureSet always at index 1 on sub-device
: test_idx;
EnumerateFeatures(fs_idx);
/*-------------------------------------------------*\
| If bridged and bulk enumeration failed, the |
| sub-device isn't reachable (e.g., headset off |
| or on USB cable). Mark map as complete so |
| lookups don't hit the wire. The device will be |
| discovered with no features; it can be re- |
| probed when the sub-device comes online. |
\*-------------------------------------------------*/
if(transport.bridge_feat_idx != 0 && !caps.feature_map_complete)
{
LOG_DEBUG("%s Sub-device not reachable through bridge, dongle only",
LOG_TAG);
caps.feature_map_complete = true;
}
}
/*-----------------------------------------------------*\
| Discover device identity. On Centurion with |
| bridge, this now queries the sub-device |
| (headset) through the bridge, not the dongle. |
\*-----------------------------------------------------*/
DiscoverDeviceName();
log_tag = "[LogitechHID++ " + caps.device_name + "]";
DiscoverDeviceType();
DiscoverFirmwareInfo();
/*-----------------------------------------------------*\
| Discover profile management features |
\*-----------------------------------------------------*/
caps.idx_profile_management = GetFeatureIndex(HIDPP20_FEAT_PROFILE_MANAGEMENT);
caps.idx_onboard_profiles = GetFeatureIndex(HIDPP20_FEAT_ONBOARD_PROFILES);
caps.idx_disable_keys_by_usage = GetFeatureIndex(HIDPP20_FEAT_DISABLE_KEYS_BY_USAGE);
/*-----------------------------------------------------*\
| Discover RGB capabilities |
\*-----------------------------------------------------*/
DiscoverRGBEffects();
if(caps.idx_rgb_effects == 0)
{
DiscoverHeadsetRGBHostmode();
}
DiscoverPerKeyZones();
DiscoverPerKey8080();
DiscoverKeyboardLayout();
/*-----------------------------------------------------*\
| Probe WirelessStatus (0x1D4B) for reconnect |
| detection. Lightspeed devices behind kernel- |
| managed receivers send WirelessStatus events |
| when they reconnect after power cycle. Cache |
| the feature index so the reader thread can |
| detect these events without sending commands. |
\*-----------------------------------------------------*/
caps.idx_wireless_status = GetFeatureIndex(HIDPP20_FEAT_WIRELESS_STATUS);
/*-----------------------------------------------------*\
| Diagnostic: log the OpenRGB-relevant |
| feature/version map (solaar-show-style) |
| for firmware-mismatch identification. |
\*-----------------------------------------------------*/
LogFeatureSummary();
if(!caps.has_zone_effects && !caps.has_perkey && !caps.has_perkey_8080)
{
LOG_DEBUG("%s %s: no RGB features found", LOG_TAG, caps.device_name.c_str());
/*-------------------------------------------------*\
| Centurion dongles with a bridge stay alive |
| to watch for sub-device connection events, |
| even without RGB. |
\*-------------------------------------------------*/
if(transport.bridge_feat_idx != 0)
{
return true;
}
return false;
}
LOG_VERBOSE("%s %s: zones=%zu perkey=%zu",
LOG_TAG, caps.device_name.c_str(),
caps.zone_clusters.size(), caps.perkey_zone_ids.size());
return true;
}
std::string LogitechHIDPP20Controller::ProbeIdentity()
{
LOG_DEBUG("%s Identifying device at %s (index=0x%02X)", LOG_TAG, location.c_str(), device_index);
DiscoverTransport();
FlushResponseQueue();
/*-----------------------------------------------------*\
| Nothing else is worth asking until IRoot answers. |
\*-----------------------------------------------------*/
if(GetFeatureIndex(HIDPP20_FEAT_FEATURE_SET, HIDPP20_POLICY_PROBE) == 0)
{
return "";
}
DiscoverFirmwareInfo();
/*-----------------------------------------------------*\
| Centurion nodes have no FirmwareInfo unitId; |
| they identify by their DeviceInfo serial. A |
| node that answers but stores no serial (PRO |
| X 2 dongle) books under its path, so it |
| cannot be recognized over a second link. |
\*-----------------------------------------------------*/
if(caps.unit_id.empty())
{
if(!caps.serial_number.empty())
{
return caps.serial_number;
}
if(transport.type == HIDPP20_TRANSPORT_CENTURION)
{
LOG_DEBUG("%s No stored serial; booking by node path", LOG_TAG);
return location + "#node";
}
}
return caps.unit_id;
}
std::string LogitechHIDPP20Controller::ProbeName()
{
DiscoverDeviceName();
/*-----------------------------------------------------*\
| DiscoverDeviceName falls back to a placeholder |
| when the device has nothing to say. Placeholders |
| are for the device list, where they are replaced |
| the moment a real name turns up. They are not |
| identities: a caller writing one into settings |
| would leave behind an entry naming nothing. |
\*-----------------------------------------------------*/
if(caps.device_name == HIDPP20_NAME_PLACEHOLDER_STD
|| caps.device_name == HIDPP20_NAME_PLACEHOLDER_CENTURION
|| !LogitechHIDPP20Controller::NameLooksReal(caps.device_name))
{
return "";
}
return caps.device_name;
}
void LogitechHIDPP20Controller::Initialize()
{
/*-----------------------------------------------------*\
| No device state changes here, let firmware effects |
| keep running until DeviceUpdateMode claims control |
| with real colors ready via ClaimSWControlIfNeeded(). |
\*-----------------------------------------------------*/
init_generation++;
initialized = true;
}
void LogitechHIDPP20Controller::Shutdown()
{
if(!initialized)
{
return;
}
/*-----------------------------------------------------*\
| Sender first: no frame may be mid-flight |
| while SW control is released below. |
\*-----------------------------------------------------*/
StopSenderThread();
StopPowerManager();
/*-----------------------------------------------------*\
| Release SW control |
\*-----------------------------------------------------*/
if(caps.idx_rgb_effects != 0)
{
SetSWControl(0, 0);
}
/*-----------------------------------------------------*\
| Restore firmware mode (skip if we never left onboard) |
\*-----------------------------------------------------*/
if(!(caps.quirks & HIDPP20_QUIRK_KEEP_ONBOARD_MODE))
{
if(caps.idx_profile_management != 0)
{
uint8_t data[1] = { 0x03 };
blankFAPmessage response;
SendAckedIntoFAP(caps.idx_profile_management, FN_8101_GET_SET_MODE,
data, 1, response);
}
else if(caps.idx_onboard_profiles != 0)
{
uint8_t data[1] = { 0x01 };
blankFAPmessage response;
SendAckedIntoFAP(caps.idx_onboard_profiles, FN_8100_SET_ONBOARD_MODE,
data, 1, response);
}
}
/*-----------------------------------------------------*\
| Release 0x0620 Headset RGB hostmode claim. |
| Best-effort; pairs with the SetHostModeState(1) |
| claim in ClaimSWControlIfNeeded. |
\*-----------------------------------------------------*/
if(caps.idx_headset_rgb_hostmode != 0)
{
uint8_t off = 0x00;
blankFAPmessage release_response;
SendAckedIntoFAP(caps.idx_headset_rgb_hostmode,
FN_0620_SET_HOST_MODE_STATE,
&off, 1, release_response);
}
initialized = false;
}
/*---------------------------------------------------------*\
| Accessors |
\*---------------------------------------------------------*/
const HIDPP20DeviceCapabilities& LogitechHIDPP20Controller::GetCapabilities() const
{
return caps;
}
std::string LogitechHIDPP20Controller::GetDeviceLocation()
{
return "HID: " + location;
}
std::string LogitechHIDPP20Controller::GetSerialString()
{
return caps.serial_number;
}
uint32_t LogitechHIDPP20Controller::GetInitGeneration() const
{
return init_generation;
}
/*---------------------------------------------------------*\
| SW Control and Power |
\*---------------------------------------------------------*/
int LogitechHIDPP20Controller::SetSWControl(uint8_t mode, uint8_t flags)
{
if(caps.idx_rgb_effects == 0)
{
return 0;
}
blankFAPmessage response;
int result;
if(caps.sw_control_simple)
{
/*-------------------------------------------------*\
| 0x8070: simple [enabled, persist]. the |
| official app/legacy send [1,1] to claim and |
| [0,0] to release, persist mirrors enabled. |
\*-------------------------------------------------*/
uint8_t en = (uint8_t)(mode > 0 ? 0x01 : 0x00);
uint8_t data[2] = { en, en };
result = SendAckedIntoFAP(caps.idx_rgb_effects, caps.fn_sw_control,
data, 2, response);
}
else
{
/*-------------------------------------------------*\
| 0x8071/0x0600: [0x01(set), mode, flags] |
\*-------------------------------------------------*/
uint8_t data[3] = { 0x01, mode, flags };
result = SendAckedIntoFAP(caps.idx_rgb_effects, caps.fn_sw_control,
data, 3, response);
}
LOG_DEBUG("%s SetSWControl mode=%d flags=0x%02X result=%d",
LOG_TAG, mode, flags, result);
return result;
}
void LogitechHIDPP20Controller::SetRGBPowerMode(uint8_t mode)
{
if(caps.idx_rgb_effects == 0 || !caps.has_power_mgmt)
{
return;
}
uint8_t data[2] = { 0x01, mode };
blankFAPmessage response;
SendAckedIntoFAP(caps.idx_rgb_effects, caps.fn_pwr_mode,
data, 2, response);
LOG_DEBUG("%s SetRGBPowerMode mode=%d", LOG_TAG, mode);
}
void LogitechHIDPP20Controller::SetHostMode()
{
if(caps.idx_profile_management != 0)
{
uint8_t data[1] = { 0x05 };
blankFAPmessage response;
SendAckedIntoFAP(caps.idx_profile_management, FN_8101_GET_SET_MODE,
data, 1, response);
LOG_DEBUG("%s ProfileManagement set to host mode", LOG_TAG);
}
else if(caps.idx_onboard_profiles != 0)
{
uint8_t set_data[1] = { 0x02 };
blankFAPmessage set_response;
SendAckedIntoFAP(caps.idx_onboard_profiles, FN_8100_SET_ONBOARD_MODE,
set_data, 1, set_response);
LOG_DEBUG("%s OnboardProfiles set to host mode", LOG_TAG);
}
}
bool LogitechHIDPP20Controller::ClaimSWControlIfNeeded()
{
if(sw_control_claimed)
{
return true;
}
/*-----------------------------------------------------*\
| 0x0620 headset (G522/G321/G315): the claim is |
| a single SetHostModeState(1); none of the |
| 0x8070/0x8071/0x0600 paths apply. Sticky; wake |
| resets the flag so first paint re-claims. |
| Released by SetHostModeState(0) in Shutdown. |
\*-----------------------------------------------------*/
if(caps.idx_headset_rgb_hostmode != 0)
{
if(!device_online.load())
{
return false;
}
uint8_t on = 0x01;
blankFAPmessage resp;
int result = SendAckedIntoFAP(caps.idx_headset_rgb_hostmode,
FN_0620_SET_HOST_MODE_STATE, &on, 1, resp);
if(result <= 0)
{
LOG_DEBUG("%s 0x0620 SetHostModeState(1) claim failed (result=%d)",
LOG_TAG, result);
return false;
}
sw_control_claimed = true;
LOG_DEBUG("%s 0x0620 host mode claimed", LOG_TAG);
return true;
}
/*-----------------------------------------------------*\
| 0x8070 per-key keyboards (those exposing 0x8080: G810 |
| family) write per-key directly with NO claim, like |
| the legacy controllers. FIXME: a partial SetSWControl |
| claim breaks per-key on the G810; the full sequence |
| is host-mode -> SetSWControl(1,1) -> SetZoneEffect |
| off per zone -> per-key. Test on real hardware which |
| parts each model supports before claiming here. |
\*-----------------------------------------------------*/
if(caps.rgb_feature_page == HIDPP20_FEAT_COLOR_LED_EFFECTS
&& caps.idx_perkey_8080 != 0)
{
return true;
}
if(caps.idx_rgb_effects == 0 || !device_online.load())
{
return false;
}
/*-----------------------------------------------------*\
| 0x8070 ZONE-ONLY devices (no 0x8080: G560/G933, |
| 0x8070 mice): the claim is just SetSWControl(1,1), |
| the official app and Solaar both do exactly this, |
| with no power/host-mode tail. No per-key layer to |
| conflict, so the zone layer is not suppressed. |
\*-----------------------------------------------------*/
if(caps.rgb_feature_page == HIDPP20_FEAT_COLOR_LED_EFFECTS)
{
int sw_result = SetSWControl(1, 1);
if(sw_result <= 0)
{
LOG_DEBUG("%s 0x8070 SetSWControl(1,1) claim failed (result=%d)",
LOG_TAG, sw_result);
return false;
}
sw_control_claimed = true;
return true;
}
/*-----------------------------------------------------*\
| Two-phase claim to avoid the visible |
| onboard->host flash. |
| |
| SW Control flags bits (from a wire capture, the |
| doc's overview mislabels them): bit 0 = effect |
| control, bit 1 = power management, bit 2 = NV |
| config. Setting the effect bit suspends the firmware |
| effect engine, and anything not painted since |
| renders as a firmware default (the 0xFFFFFF per-key |
| buffer, or the saved effect card on bad input). |
| |
| So claim with flags=6: the firmware engine keeps |
| rendering until we replace its output. We cannot |
| stay there, the idle/wake machine needs flags=5/3 |
| as its active/idle signals, so after the first |
| complete per-key frame, when per-key masks zone |
| output anyway, upgrade 6->5 invisibly. |
| |
| No power-timer writes at claim: our |
| StartSleep trigger fires SetRgbPowerMode(3) |
| explicitly when a fade is wanted. |
| |
| Fire the whole claim back-to-back, no per-command ACK |
| wait; VerifyClaimPipeline reconciles it. |
\*-----------------------------------------------------*/
claim_pipeline_.clear();
pipelining_claim_ = true;
int claim_result = SetSWControl(3, 6);
if(claim_result <= 0)
{
pipelining_claim_ = false;
claim_pipeline_.clear();
LOG_DEBUG("%s SW control claim failed (SetSWControl(3,6) result=%d)",
LOG_TAG, claim_result);
return false;
}
/*-----------------------------------------------------*\
| Keyboard-family handshake on feature 0x4522 |
| (DisableKeysByUsage). G815 / G915 / G Pro send |
| this fn3 + fn1 empty-payload pair between |
| SetSWControl and the first mode write. |
| Feature-gated inside, no-op on G502 / G515. |
\*-----------------------------------------------------*/
DoDisableKeysByUsageHandshake();
SetRGBPowerMode(1);
WritePowerConfig(idle_timeout_s, sleep_timeout_s);
/*-----------------------------------------------------*\
| KEEP_ONBOARD_MODE (G915 TKL): host mode breaks the |
| F-row (onboard-profile-mapped G-keys); per-key |
| works onboard. |
\*-----------------------------------------------------*/
if(caps.quirks & HIDPP20_QUIRK_KEEP_ONBOARD_MODE)
{
LOG_INFO("%s KEEP_ONBOARD_MODE quirk: skipping onboard->host switch",
LOG_TAG);
}
else
{
SetHostMode();
}
/*-----------------------------------------------------*\
| Reconcile the batch's ACKs; blocking-retry any miss. |
\*-----------------------------------------------------*/
pipelining_claim_ = false;
VerifyClaimPipeline();
written_idle_s = idle_timeout_s;
written_sleep_s = sleep_timeout_s;
sw_control_claimed = true;
sw_control_needs_upgrade_to_5 = true;
prep_applied = false;
LOG_DEBUG("%s Claimed SW control at flags=6 "
"(effect engine still autonomous until first per-key frame)",
LOG_TAG);
return true;
}
void LogitechHIDPP20Controller::VerifyClaimPipeline()
{
/*-----------------------------------------------------*\
| Reconcile the pipelined claim's ACKs. Acks arrive |
| interleaved across features, so match each echoed |
| (feat, func, sw_id) to any outstanding pending, not |
| in send order; re-send an unmatched one blocking. |
\*-----------------------------------------------------*/
std::vector<bool> acked(claim_pipeline_.size(), false);
size_t need = claim_pipeline_.size();
size_t got = 0;
size_t max_read = claim_pipeline_.size() + 4; /* slack for stray frames */
for(size_t r = 0; r < max_read && got < need; r++)
{
uint8_t rfeat = 0;
uint8_t rfunc = 0;
uint8_t rdata[60] = {};
int rd = ReadMessage(&rfeat, &rfunc, rdata, sizeof(rdata), 60);
if(rd <= 0)
{
break; /* no more responses within the window */
}
if((rfunc & 0x0F) != HIDPP20_SW_ID)
{
continue; /* not one of our acks */
}
for(size_t i = 0; i < claim_pipeline_.size(); i++)
{
if(!acked[i]
&& rfeat == claim_pipeline_[i].feat
&& (rfunc & 0xF0) == (claim_pipeline_[i].func & 0xF0))
{
acked[i] = true;
got++;
break;
}
}
}
for(size_t i = 0; i < claim_pipeline_.size(); i++)
{
if(!acked[i])
{
LOG_DEBUG("%s claim pipeline: re-sending feat=0x%02X func=0x%02X blocking",
LOG_TAG, claim_pipeline_[i].feat, claim_pipeline_[i].func);
blankFAPmessage response;
SendAckedIntoFAP(claim_pipeline_[i].feat, claim_pipeline_[i].func,
claim_pipeline_[i].data, claim_pipeline_[i].len, response);
}
}
claim_pipeline_.clear();
}
void LogitechHIDPP20Controller::UpgradeSwControlAfterFirstPaint()
{
/*-----------------------------------------------------*\
| Called by |
| RGBController_LogitechHIDPP20::DeviceUpdateLEDs |
| immediately after the first successful PerKeyFrameEnd |
| of a newly-claimed session. At this point the per-key |
| buffer is populated with real host colors, so the |
| per-key layer masks the zone layer, so the 6->5 |
| transition does not expose the firmware's default |
| LED buffer. Upgrading to flags=5 puts the device into |
| the "active steady state" that OnUserActivity expects |
| for idle detection events. |
\*-----------------------------------------------------*/
if(!sw_control_needs_upgrade_to_5)
{
return;
}
if(caps.idx_rgb_effects == 0 || !device_online.load())
{
sw_control_needs_upgrade_to_5 = false;
return;
}
int result = SetSWControl(3, 5);
if(result > 0)
{
sw_control_needs_upgrade_to_5 = false;
LOG_DEBUG("%s Upgraded SW control to flags=5 "
"(per-key layer now masks zone layer)", LOG_TAG);
}
else
{
LOG_DEBUG("%s SW control upgrade to flags=5 failed (result=%d)",
LOG_TAG, result);
/* Leave the flag set so the next frame will retry. */
}
}
void LogitechHIDPP20Controller::DoDisableKeysByUsageHandshake()
{
/*-----------------------------------------------------*\
| G815 / G915 / G Pro keyboards send this two-call |
| handshake on feature 0x4522 (DisableKeysByUsage) |
| before any mode change or per-key write. The |
| original OpenRGB G815 + G915 controllers both do it |
| in their BeginModeSet and InitializeDirect paths. |
| Both payloads are empty; bare function calls, |
| suggesting they're state reads used as a firmware |
| sync point, not actual disable-keys writes (those |
| would require a keyset in the payload). |
| |
| Feature-gated: caps.idx_disable_keys_by_usage |
| is only non-zero on devices that enumerate |
| 0x4522. G502 and G515 do not enumerate it, so |
| this is a no-op on those. |
\*-----------------------------------------------------*/
if(caps.idx_disable_keys_by_usage == 0 || !device_online.load())
{
return;
}
blankFAPmessage response;
SendAckedIntoFAP(caps.idx_disable_keys_by_usage, 0x30,
nullptr, 0, response, HIDPP20_POLICY_PROBE);
SendAckedIntoFAP(caps.idx_disable_keys_by_usage, 0x10,
nullptr, 0, response, HIDPP20_POLICY_PROBE);
LOG_DEBUG("%s 0x4522 DisableKeysByUsage handshake sent (fn3 + fn1)", LOG_TAG);
}
/*---------------------------------------------------------*\
| Observed per-key prep sequence |
| |
| Two SetEffectByIndex calls cloned byte-for-byte from a |
| wire capture of the vendor app talking to a G502 X PLUS |
| (wired-ish connection via Lightspeed receiver). The two |
| frames are: |
| |
| First, ~260ms after SetOnboardMode(02): |
| 1101091a ff 02 00 00 00 00 00 00 20 64 00 00 01 ... |
| RgbEffects.SetEffectByIndex |
| cluster=0xFF (all clusters) |
| effectIdx=0x02 (Breathing on G502's enumerated set) |
| params=[00 00 00 00 00 00 20 64 00 00] (10 bytes) |
| positions [6]=0x20, [7]=0x64 are non-zero. The |
| Breathing effect parameter layout documented in |
| the protocol reference has period/brightness in |
| those slots, but the exact meaning of these two |
| values in this context is NOT understood. The |
| vendor app sends them verbatim on every claim; we |
| mirror. |
| persist=0x01 |
| |
| Second, ~95ms after the first: |
| 1101091a ff 04 00 00 00 00 00 00 00 00 00 00 01 ... |
| RgbEffects.SetEffectByIndex |
| cluster=0xFF |
| effectIdx=0x04: OUT OF RANGE on G502 X PLUS (the |
| device only enumerates effects 0..3 via |
| GetEffectInfo). Likely a "custom / direct mode" |
| slot the firmware accepts but does not advertise |
| through the normal enumeration. |
| params=[00 x 10] |
| persist=0x01 |
| |
| The function we call is caps.fn_set_effect (0x10 on |
| 0x8071, 0x30 on 0x8070, same as SetZoneEffect uses). |
| |
| The values are not derived from the effect param layout |
| tables: they are observed-working bytes, and that is the |
| contract. DeviceUpdateLEDs gates which devices run this. |
\*---------------------------------------------------------*/
void LogitechHIDPP20Controller::DoObservedPerKeyPrep()
{
if(caps.idx_rgb_effects == 0 || !device_online.load())
{
return;
}
/*-----------------------------------------------------*\
| Prep1: SetEffectByIndex(cluster=0xFF, |
| effectIdx=2, params) with the device-wide |
| template bytes at params[6..7]. |
| |
| The template bytes are discovered at feature- |
| discovery time via GetEffectSpecificInfo on any |
| firmware effect card; the vendor app does the same |
| read-then-echo pattern, and on a G502 X PLUS the |
| read value is 0x20 0x64 across every card. We |
| don't know what those bytes mean semantically, |
| just that the device expects to see them echoed |
| back verbatim in this position when priming the |
| firmware effect engine for per-key takeover. |
\*-----------------------------------------------------*/
uint8_t prep1[16] =
{
0xFF, 0x02, /* cluster, effectIdx */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* params[0..5] */
caps.effect_card_template[0], /* params[6], device */
caps.effect_card_template[1], /* params[7], device */
0x00, 0x00, /* params[8..9] */
0x01, /* persist */
0x00, 0x00, 0x00 /* padding */
};
blankFAPmessage prep1_resp;
SendAckedIntoFAP(caps.idx_rgb_effects, caps.fn_set_effect,
prep1, 16, prep1_resp);
/*-----------------------------------------------------*\
| Prep2: SetEffectByIndex at the first out-of-range |
| slot above the last enumerated effect, all params |
| zero (G502: effectIdx=4, matching the capture). |
| Best understanding: an unadvertised custom/direct- |
| mode slot, without writing it the per-key pipeline |
| does not engage and the firmware renders the saved |
| effect card during the claim->paint window. |
\*-----------------------------------------------------*/
uint8_t num_effects = 0;
if(!caps.zone_clusters.empty())
{
size_t count = caps.zone_clusters[0].effects.size();
num_effects = (count > 0xFFu) ? 0xFFu : (uint8_t)count;
}
uint8_t prep2[16] =
{
0xFF, num_effects, /* cluster, first OOR slot */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* params[0..5] */
0x00, 0x00, 0x00, 0x00, /* params[6..9] */
0x01, /* persist */
0x00, 0x00, 0x00 /* padding */
};
blankFAPmessage prep2_resp;
SendAckedIntoFAP(caps.idx_rgb_effects, caps.fn_set_effect,
prep2, 16, prep2_resp);
LOG_DEBUG("%s DoObservedPerKeyPrep: prep1 template=0x%02X%02X "
"prep2 idx=%u (OOR slot above %u enumerated effects)",
LOG_TAG,
caps.effect_card_template[0], caps.effect_card_template[1],
num_effects, num_effects);
}
void LogitechHIDPP20Controller::DoKeyboardFamilyPerKeyPrep()
{
/*-----------------------------------------------------*\
| G815 / G915 / G Pro per-key takeover prep, cloned |
| from the InitializeDirect sequence in their legacy |
| OpenRGB controllers. Three steps after the |
| claim-time 0x4522 handshake (which fires from |
| ClaimSWControlIfNeeded): |
| |
| 1. For each enumerated cluster, SetEffectByIndex |
| with effectIdx=0 (Off) and persist=1. This |
| deactivates the firmware effect engine per |
| cluster, unlike the G515 static-black fallback |
| which leaves the engine running with a black |
| static color. |
| |
| 2. Send a primer SetIndividualRgbZones write |
| covering one zone (the first enumerated) at |
| black. G915 uses Escape specifically; we use |
| the first enumerated zone for portability. |
| |
| 3. FrameEnd, so the primer write commits and the |
| per-key layer becomes the visible output. |
| |
| Gate (caller's responsibility): feature 0x4522 |
| present AND per-key V2 present. G502 / G515 fail |
| the 0x4522 side; older keyboards without 0x8081 |
| fail the per-key side. |
\*-----------------------------------------------------*/
if(caps.idx_rgb_effects == 0 || caps.idx_perkey_v2 == 0 || !device_online.load())
{
return;
}
for(size_t i = 0; i < caps.zone_clusters.size(); i++)
{
uint8_t cluster_off[16] =
{
caps.zone_clusters[i].index, 0x00, /* cluster, effectIdx=0 (Off) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x01, /* persist */
0x00, 0x00, 0x00
};
blankFAPmessage cluster_resp;
SendAckedIntoFAP(caps.idx_rgb_effects, caps.fn_set_effect,
cluster_off, 16, cluster_resp);
}
if(caps.perkey_zone_ids.empty())
{
LOG_DEBUG("%s DoKeyboardFamilyPerKeyPrep: no per-key zones enumerated, "
"skipping primer key", LOG_TAG);
return;
}
uint8_t primer_zone = (uint8_t)(caps.perkey_zone_ids[0] & 0xFF);
uint8_t primer[4] = { primer_zone, 0x00, 0x00, 0x00 };
std::vector<uint8_t> primer_zones;
primer_zones.push_back(primer_zone);
SendPerKeyData(caps.idx_perkey_v2, FN_8081_SET_INDIVIDUAL,
primer, 4, primer_zones);
PerKeyFrameEnd();
LOG_DEBUG("%s DoKeyboardFamilyPerKeyPrep: %zu clusters -> Off, "
"primer zone=0x%02X, FrameEnd committed",
LOG_TAG, caps.zone_clusters.size(), primer_zone);
}
/*---------------------------------------------------------*\
| Retry-paint scheduling |
| |
| Called by RGBController_LogitechHIDPP20::DeviceUpdateLEDs |
| when a full pass completes with `acked_zones.size() != |
| attempted_zones.size()` (partial commit). The retry |
| re-runs a whole DeviceUpdateLEDs cycle from the power |
| thread so the uncommitted zones (marked |
| HIDPP20_UNCOMMITTED in sent_colors) get another shot. |
| |
| Streaming animation frames also call ScheduleRetryPaint |
| on partial commit, but the next animation frame almost |
| always CancelRetryPaint()s before the deadline fires, |
| so the retry is a free no-op in the streaming path. |
| The retry only actually fires when no follow-up frame |
| arrives, which matches our two problem cases: |
| 1. First frame after a reconnect-transient claim |
| (Direct mode, no animation timer). |
| 2. Last frame of an animation that then stops. |
\*---------------------------------------------------------*/
bool LogitechHIDPP20Controller::ScheduleRetryPaint()
{
size_t max_attempts =
sizeof(HIDPP20_REPAINT_RETRY_BACKOFF_MS) / sizeof(uint16_t);
uint8_t attempt = retry_paint_attempt_.load();
if(attempt >= max_attempts)
{
/*-------------------------------------------------*\
| Retry budget exhausted. Give up for |
| this sequence; the next fresh failure |
| (after a full_commit clears the attempt |
| counter) will start from attempt 0. |
\*-------------------------------------------------*/
retry_paint_deadline_.store(std::chrono::steady_clock::time_point{});
LOG_DEBUG("%s retry paint budget exhausted (%zu attempts)",
LOG_TAG, max_attempts);
return false;
}
uint16_t delay_ms = HIDPP20_REPAINT_RETRY_BACKOFF_MS[attempt];
std::chrono::steady_clock::time_point deadline = std::chrono::steady_clock::now()
+ std::chrono::milliseconds(delay_ms);
retry_paint_deadline_.store(deadline);
LOG_DEBUG("%s retry paint scheduled attempt=%u delay=%ums",
LOG_TAG, attempt, delay_ms);
return true;
}
void LogitechHIDPP20Controller::CancelRetryPaint()
{
retry_paint_deadline_.store(std::chrono::steady_clock::time_point{});
retry_paint_attempt_.store(0);
}
void LogitechHIDPP20Controller::TickRetryPaintIfPending()
{
/*-----------------------------------------------------*\
| Called from the power thread's main loop |
| each tick. Checks the retry deadline and |
| fires the repaint callback when it expires. |
| The callback runs DeviceUpdateLEDs on the |
| power thread's context, not recursively |
| from inside another DeviceUpdateLEDs call. |
\*-----------------------------------------------------*/
std::chrono::steady_clock::time_point deadline = retry_paint_deadline_.load();
if(deadline == std::chrono::steady_clock::time_point{})
{
return;
}
if(std::chrono::steady_clock::now() < deadline)
{
return;
}
/*-----------------------------------------------------*\
| Clear the deadline before firing so a concurrent |
| ScheduleRetryPaint (from a different thread) doesn't |
| double-fire on the same tick. Advance the attempt |
| counter so the next ScheduleRetryPaint (if this |
| retry also fails) picks the next backoff slot. |
\*-----------------------------------------------------*/
retry_paint_deadline_.store(std::chrono::steady_clock::time_point{});
retry_paint_attempt_.fetch_add(1);
LOG_DEBUG("%s retry paint firing", LOG_TAG);
if(request_repaint_fn)
{
request_repaint_fn();
}
}
/*---------------------------------------------------------*\
| Per-key lighting (0x8081) |
\*---------------------------------------------------------*/
void LogitechHIDPP20Controller::SetPerKeyColors
(
const std::vector<std::pair<uint16_t, RGBColor>>& zone_colors
)
{
if(!device_online.load()) return;
uint8_t perkey_idx = (caps.idx_perkey_v2 != 0) ? caps.idx_perkey_v2 : caps.idx_perkey_v1;
if(perkey_idx == 0)
{
return;
}
/*-----------------------------------------------------*\
| Batch into SetIndividualRgbZones (fn1): 4 |
| entries/packet Each entry = [zone_id, R, |
| G, B]. Track the zones in each batch so |
| PerKeyFrameEnd can report which committed. |
\*-----------------------------------------------------*/
uint8_t data[16];
std::vector<uint8_t> batch_zones;
int count = 0;
for(size_t i = 0; i < zone_colors.size(); i++)
{
int offset = count * 4;
data[offset + 0] = (uint8_t)zone_colors[i].first;
data[offset + 1] = RGBGetRValue(zone_colors[i].second);
data[offset + 2] = RGBGetGValue(zone_colors[i].second);
data[offset + 3] = RGBGetBValue(zone_colors[i].second);
batch_zones.push_back((uint8_t)zone_colors[i].first);
count++;
if(count == 4 || i == zone_colors.size() - 1)
{
SendPerKeyData(perkey_idx, FN_8081_SET_INDIVIDUAL,
data, count * 4, batch_zones);
memset(data, 0, sizeof(data));
batch_zones.clear();
count = 0;
}
}
}
void LogitechHIDPP20Controller::SetAllPerKeyColor(RGBColor color)
{
if(!device_online.load()) return;
uint8_t perkey_idx = (caps.idx_perkey_v2 != 0) ? caps.idx_perkey_v2 : caps.idx_perkey_v1;
if(perkey_idx == 0)
{
return;
}
uint8_t r = RGBGetRValue(color);
uint8_t g = RGBGetGValue(color);
uint8_t b = RGBGetBValue(color);
/*-----------------------------------------------------*\
| Use SetRangeRgbZones (fn5): [start, end, R, |
| G, B] x 3 per packet. Sets all zones in a |
| contiguous range to one color. Gaps in zone |
| IDs are silently ignored by firmware. For |
| uniform color this is far more efficient than |
| fn6: 1-2 packets vs 8 packets for 94 zones. |
\*-----------------------------------------------------*/
uint8_t min_zone = 255, max_zone = 0;
for(uint16_t zid : caps.perkey_zone_ids)
{
if(zid > 0 && zid <= 255)
{
if((uint8_t)zid < min_zone) min_zone = (uint8_t)zid;
if((uint8_t)zid > max_zone) max_zone = (uint8_t)zid;
}
}
if(min_zone <= max_zone)
{
uint8_t data[5] = { min_zone, max_zone, r, g, b };
std::vector<uint8_t> batch_zones;
for(uint16_t zid : caps.perkey_zone_ids)
{
if(zid >= min_zone && zid <= max_zone)
{
batch_zones.push_back((uint8_t)zid);
}
}
SendPerKeyData(perkey_idx, FN_8081_SET_RANGE, data, 5, batch_zones);
}
}
void LogitechHIDPP20Controller::SendPerKeyData
(
uint8_t perkey_idx,
uint8_t function,
const uint8_t* data,
size_t len,
const std::vector<uint8_t>& zone_ids
)
{
/*-----------------------------------------------------*\
| Pipelined within the frame, paced by the device's ACK |
| stream: at most HIDPP20_PERKEY_WINDOW packets in |
| flight unacked, on USB this is what stops the |
| firmware dropping responses. A stalled stream aborts |
| the frame; unacked zones ride the next delta. |
\*-----------------------------------------------------*/
if(frame_attempted_zones.empty() && frame_packets.empty())
{
frame_first_write = std::chrono::steady_clock::now();
}
frame_attempted_zones.insert(frame_attempted_zones.end(),
zone_ids.begin(), zone_ids.end());
if(frame_aborted)
{
return;
}
while(frame_packets.size() - frame_responses_seen >= perkey_window)
{
if(ProcessOnePerKeyResponse(HIDPP20_PERKEY_ACK_WAIT_MS, perkey_idx) <= 0)
{
LOG_DEBUG("%s per-key ACK stream stalled (%zu in flight), aborting frame",
LOG_TAG, frame_packets.size() - frame_responses_seen);
frame_aborted = true;
return;
}
}
int send_result = SendMessage(perkey_idx, function, data, len);
if(send_result < 0)
{
/*-------------------------------------------------*\
| Never left the host, no ACK will come. Not |
| recorded as a packet, so its zones simply |
| never ack and ride the next frame's delta. |
\*-------------------------------------------------*/
LOG_DEBUG("%s per-key write wire send failed (result=%d) func=0x%02X",
LOG_TAG, send_result, function);
return;
}
PerKeyPacket packet;
packet.function = function;
packet.len = (len > sizeof(packet.payload)) ? sizeof(packet.payload) : len;
packet.zone_ids = zone_ids;
packet.acked = false;
memset(packet.payload, 0, sizeof(packet.payload));
memcpy(packet.payload, data, packet.len);
frame_packets.push_back(std::move(packet));
fe_staged_zones += zone_ids.size();
}
int LogitechHIDPP20Controller::ProcessOnePerKeyResponse(int timeout_ms, uint8_t perkey_idx)
{
uint8_t resp_feat = 0;
uint8_t resp_func = 0;
uint8_t resp_data[60] = {};
int rd = ReadMessage(&resp_feat, &resp_func, resp_data, sizeof(resp_data), timeout_ms);
if(rd <= 0)
{
return rd;
}
/*-----------------------------------------------------*\
| HID++ error frame: feat=0xFF, func=err_feat, |
| data[0]=err_func, data[1]=err_code. |
\*-----------------------------------------------------*/
if(resp_feat == 0xFF)
{
uint8_t err_feat = resp_func;
uint8_t err_func = resp_data[0];
uint8_t err_code = resp_data[1];
if(err_feat == perkey_idx && (err_func & 0x0F) == HIDPP20_SW_ID &&
(err_func & 0xF0) != FN_8081_FRAME_END)
{
/*---------------------------------------------*\
| A write was rejected outright. It answered, |
| but nothing it carried committed. |
\*---------------------------------------------*/
LOG_DEBUG("%s per-key write error 0x%02X func=0x%02X",
LOG_TAG, err_code, err_func);
frame_responses_seen++;
}
return 1;
}
if(resp_feat != perkey_idx || (resp_func & 0x0F) != HIDPP20_SW_ID ||
(resp_func & 0xF0) == FN_8081_FRAME_END)
{
return 1;
}
frame_responses_seen++;
if(MatchPerKeyAck(resp_func & 0xF0, resp_data, frame_acked_zones) >= 0)
{
frame_exact_acks++;
}
else
{
/*-------------------------------------------------*\
| Echo format unknown for this function, count |
| it toward the group, and log the payload so a |
| real run teaches us what the firmware echoes. |
\*-------------------------------------------------*/
frame_unmatched_acks[resp_func & 0xF0]++;
char hex[16 * 3 + 1];
for(int b = 0; b < 16; b++)
{
snprintf(&hex[b * 3], 4, "%02X ", resp_data[b]);
}
LOG_TRACE("%s per-key ACK echo unmatched func=0x%02X data=[%s]",
LOG_TAG, resp_func, hex);
}
return 1;
}
void LogitechHIDPP20Controller::ResetPerKeyFrameState()
{
frame_attempted_zones.clear();
frame_packets.clear();
frame_acked_zones.clear();
frame_unmatched_acks.clear();
frame_responses_seen = 0;
frame_exact_acks = 0;
frame_aborted = false;
}
void LogitechHIDPP20Controller::DrainStaleResponses()
{
std::chrono::steady_clock::time_point deadline =
std::chrono::steady_clock::now() + std::chrono::milliseconds(150);
while(std::chrono::steady_clock::now() < deadline)
{
uint8_t resp_data[60];
if(ReadMessage(nullptr, nullptr, resp_data, sizeof(resp_data), 25) <= 0)
{
return;
}
}
}
/*---------------------------------------------------------*\
| Per-key frame sender thread: the effect engine |
| submits snapshots at whatever rate it likes; |
| the sender pushes the newest at the pace the |
| link sustains and skips the rest. Wire time is |
| paid here, never on the animating thread. |
\*---------------------------------------------------------*/
void LogitechHIDPP20Controller::SetPerKeyFrameSender(std::function<void(std::vector<RGBColor>&)> fn)
{
perkey_frame_fn = fn;
sender_running.store(true);
sender_thread = new std::thread(&LogitechHIDPP20Controller::SenderThreadFunc, this);
}
bool LogitechHIDPP20Controller::HasPerKeyFrameSender() const
{
return sender_running.load();
}
void LogitechHIDPP20Controller::SubmitPerKeyFrame(const std::vector<RGBColor>& frame)
{
if(!sender_running.load())
{
return;
}
{
std::lock_guard<std::mutex> lock(pending_frame_mutex);
if(pending_frame_valid)
{
pending_frames_skipped++;
}
pending_frame = frame;
pending_frame_valid = true;
}
pending_frame_cv.notify_one();
}
void LogitechHIDPP20Controller::SenderThreadFunc()
{
while(sender_running.load())
{
std::vector<RGBColor> frame;
uint32_t skipped = 0;
{
std::unique_lock<std::mutex> lock(pending_frame_mutex);
pending_frame_cv.wait(lock, [this]
{
return pending_frame_valid || !sender_running.load();
});
if(!sender_running.load())
{
return;
}
frame = std::move(pending_frame);
pending_frame_valid = false;
skipped = pending_frames_skipped;
pending_frames_skipped = 0;
}
if(skipped > 0)
{
LOG_TRACE("%s sender skipped %u stale frame(s)", LOG_TAG, skipped);
}
/*-------------------------------------------------*\
| Teardown started. The frame cannot land and |
| would hold the transaction mutex that stopping |
| the threads needs, so keep it and let the loop |
| exit. |
\*-------------------------------------------------*/
if(teardown_pending.load())
{
{
std::lock_guard<std::mutex> lock(pending_frame_mutex);
if(!pending_frame_valid)
{
pending_frame = std::move(frame);
pending_frame_valid = true;
}
}
std::this_thread::sleep_for(std::chrono::milliseconds(10));
continue;
}
if(perkey_frame_fn)
{
perkey_frame_fn(frame);
}
}
}
void LogitechHIDPP20Controller::StopSenderThread()
{
sender_running.store(false);
pending_frame_cv.notify_all();
if(sender_thread && sender_thread->joinable())
{
sender_thread->join();
}
delete sender_thread;
sender_thread = nullptr;
}
/*---------------------------------------------------------*\
| Attribute one write ACK to one outstanding packet by |
| payload echo (decoded from captures, G515/G502): |
| fn1 SetIndividualRgbZones: resp[i] = zone of entry i, |
| packed contiguously; 0xFF = that zone rejected |
| fn5 SetRangeRgbZones: resp[k] = start zone of |
| range entry k |
| fn6 SetRgbZonesSingleValue: resp = [R, G, B, zone] |
| Anything else falls back to per-function count |
| matching in the caller. Returns the matched |
| packet index or -1, appending zones the echo |
| proves to acked_zones_out. |
\*---------------------------------------------------------*/
int LogitechHIDPP20Controller::MatchPerKeyAck
(
uint8_t resp_func_hi,
const uint8_t* resp_data,
std::vector<uint8_t>& acked_zones_out
)
{
for(size_t p = 0; p < frame_packets.size(); p++)
{
PerKeyPacket& packet = frame_packets[p];
if(packet.acked || packet.function != resp_func_hi)
{
continue;
}
if(packet.function == FN_8081_SET_INDIVIDUAL)
{
size_t entries = packet.len / 4;
bool matches = true;
size_t echoed = 0;
for(size_t j = 0; j < entries; j++)
{
uint8_t req_zone = packet.payload[j * 4];
uint8_t resp_zone = resp_data[j];
if(resp_zone == req_zone)
{
echoed++;
}
else if(resp_zone != 0xFF)
{
matches = false;
break;
}
}
if(!matches || echoed == 0)
{
continue;
}
for(size_t j = 0; j < entries; j++)
{
if(resp_data[j] == packet.payload[j * 4])
{
acked_zones_out.push_back(packet.payload[j * 4]);
}
else
{
LOG_DEBUG("%s per-key zone 0x%02X rejected by firmware",
LOG_TAG, packet.payload[j * 4]);
}
}
packet.acked = true;
return (int)p;
}
if(packet.function == FN_8081_SET_RANGE)
{
size_t entries = packet.len / 5;
bool matches = (entries > 0);
for(size_t k = 0; k < entries; k++)
{
if(resp_data[k] != packet.payload[k * 5])
{
matches = false;
break;
}
}
if(!matches)
{
continue;
}
acked_zones_out.insert(acked_zones_out.end(),
packet.zone_ids.begin(), packet.zone_ids.end());
packet.acked = true;
return (int)p;
}
if(packet.function == FN_8081_SET_SINGLE_VALUE)
{
if(memcmp(resp_data, packet.payload, 3) != 0)
{
continue;
}
bool zone_in_packet = false;
for(uint8_t z : packet.zone_ids)
{
if(z == resp_data[3])
{
zone_in_packet = true;
break;
}
}
if(!zone_in_packet)
{
continue;
}
acked_zones_out.insert(acked_zones_out.end(),
packet.zone_ids.begin(), packet.zone_ids.end());
packet.acked = true;
return (int)p;
}
/*-------------------------------------------------*\
| Unknown function, echo the request verbatim. |
\*-------------------------------------------------*/
if(memcmp(resp_data, packet.payload, packet.len) == 0)
{
acked_zones_out.insert(acked_zones_out.end(),
packet.zone_ids.begin(), packet.zone_ids.end());
packet.acked = true;
return (int)p;
}
}
return -1;
}
PerKeyFrameResult LogitechHIDPP20Controller::PerKeyFrameEnd()
{
PerKeyFrameResult result;
result.frame_end_acked = false;
result.attempted_zones = std::move(frame_attempted_zones);
uint8_t perkey_idx = (caps.idx_perkey_v2 != 0) ? caps.idx_perkey_v2 : caps.idx_perkey_v1;
if(!device_online.load() || perkey_idx == 0)
{
result.acked_zones = std::move(frame_acked_zones);
ResetPerKeyFrameState();
return result;
}
std::chrono::steady_clock::time_point send_done = std::chrono::steady_clock::now();
if(!frame_aborted)
{
/*-------------------------------------------------*\
| Phase A: collect the remaining write ACKs, a |
| short tail, the window kept the outstanding |
| count small. The per-read timeout is a quiet |
| guard: a dropped ACK is never coming. |
\*-------------------------------------------------*/
std::chrono::steady_clock::time_point ack_deadline =
send_done + std::chrono::milliseconds(250);
while(frame_responses_seen < frame_packets.size())
{
int remaining = (int)std::chrono::duration_cast<std::chrono::milliseconds>(
ack_deadline - std::chrono::steady_clock::now()).count();
if(remaining <= 0)
{
break;
}
if(remaining > (int)HIDPP20_PERKEY_ACK_TAIL_MS)
{
remaining = (int)HIDPP20_PERKEY_ACK_TAIL_MS;
}
if(ProcessOnePerKeyResponse(remaining, perkey_idx) <= 0)
{
break;
}
}
}
std::chrono::steady_clock::time_point acks_done = std::chrono::steady_clock::now();
int busy_polls = 0;
uint16_t predicted_ms = 0;
bool fe_probe = false;
/*-----------------------------------------------------*\
| Phase B: commit. LONG message (0x11), 16 |
| zero bytes; short-format hits intermittent |
| BUSY. Skipped when the frame aborted (landed |
| writes latch with the next FrameEnd). |
| |
| BUSY here is frame-rate backpressure, not |
| failure: the not-ready window scales with keys |
| written. Sleep the learned prediction first (the |
| link stays free for input), then poll the |
| remainder. The wait is the frame cadence and |
| paces the sender, never the effect engine. |
\*-----------------------------------------------------*/
size_t commit_zones = fe_staged_zones;
if(!frame_aborted)
{
float predicted = fe_busy_us_per_zone * (float)commit_zones / 1000.0f;
if(predicted > 100.0f)
{
predicted = 100.0f;
}
predicted_ms = (uint16_t)predicted;
/*-------------------------------------------------*\
| Probe: every so often, sleep deliberately |
| short to test whether the device got faster. A |
| miss costs a few ms (ready is within the |
| shaved step, the NEAR poll picks it up); a |
| clean accept adopts the shorter window. |
\*-------------------------------------------------*/
if(predicted_ms > HIDPP20_FE_PROBE_STEP_MS &&
++fe_frames_since_probe >= HIDPP20_FE_PROBE_INTERVAL)
{
fe_frames_since_probe = 0;
predicted_ms -= HIDPP20_FE_PROBE_STEP_MS;
fe_probe = true;
}
if(predicted_ms > 0)
{
std::this_thread::sleep_for(std::chrono::milliseconds(predicted_ms));
}
uint8_t data[16] = {};
int send_result = SendMessage(perkey_idx, FN_8081_FRAME_END, data, sizeof(data));
if(send_result < 0)
{
LOG_DEBUG("%s FrameEnd wire send failed (result=%d)", LOG_TAG, send_result);
}
else
{
std::chrono::steady_clock::time_point fe_deadline =
std::chrono::steady_clock::now() + std::chrono::milliseconds(250);
while(!result.frame_end_acked)
{
int remaining = (int)std::chrono::duration_cast<std::chrono::milliseconds>(
fe_deadline - std::chrono::steady_clock::now()).count();
if(remaining <= 0)
{
LOG_DEBUG("%s FrameEnd timed out waiting for ACK", LOG_TAG);
break;
}
uint8_t resp_feat = 0;
uint8_t resp_func = 0;
uint8_t resp_data[60] = {};
int rd = ReadMessage(&resp_feat, &resp_func,
resp_data, sizeof(resp_data), remaining);
if(rd < 0)
{
LOG_DEBUG("%s FrameEnd read error (result=%d)", LOG_TAG, rd);
break;
}
if(rd == 0)
{
LOG_DEBUG("%s FrameEnd timed out waiting for ACK", LOG_TAG);
break;
}
if(resp_feat == 0xFF)
{
uint8_t err_feat = resp_func;
uint8_t err_func = resp_data[0];
uint8_t err_code = resp_data[1];
if(err_feat != perkey_idx || (err_func & 0x0F) != HIDPP20_SW_ID)
{
continue;
}
if((err_func & 0xF0) != FN_8081_FRAME_END)
{
LOG_DEBUG("%s per-key write error 0x%02X func=0x%02X",
LOG_TAG, err_code, err_func);
frame_responses_seen++;
continue;
}
if(err_code == 0x08)
{
busy_polls++;
std::this_thread::sleep_for(std::chrono::milliseconds(
(predicted_ms > 0) ? HIDPP20_FRAME_END_BUSY_POLL_NEAR_MS
: HIDPP20_FRAME_END_BUSY_POLL_MS));
SendMessage(perkey_idx, FN_8081_FRAME_END, data, sizeof(data));
continue;
}
LOG_DEBUG("%s FrameEnd error 0x%02X (polls=%d)",
LOG_TAG, err_code, busy_polls);
break;
}
if(resp_feat != perkey_idx || (resp_func & 0x0F) != HIDPP20_SW_ID)
{
continue;
}
if((resp_func & 0xF0) == FN_8081_FRAME_END)
{
result.frame_end_acked = true;
break;
}
/*-----------------------------------------*\
| A straggler write ACK: attribute it. |
\*-----------------------------------------*/
frame_responses_seen++;
if(MatchPerKeyAck(resp_func & 0xF0, resp_data, frame_acked_zones) >= 0)
{
frame_exact_acks++;
}
else
{
frame_unmatched_acks[(uint8_t)(resp_func & 0xF0)]++;
}
}
}
}
/*-----------------------------------------------------*\
| Learn the busy window from what happened, last |
| write ACK to accepted FrameEnd. |
| probe frame, clean accept -> adopt shorter window |
| probe frame, BUSY -> deliberate miss |
| normal frame, BUSY -> ran short, pull |
| toward measurement |
\*-----------------------------------------------------*/
if(result.frame_end_acked)
{
/*-------------------------------------------------*\
| Committed; the staging is latched and |
| the next commit starts from empty. |
\*-------------------------------------------------*/
fe_staged_zones = 0;
}
if(result.frame_end_acked && commit_zones > 0)
{
float zones = (float)commit_zones;
if(fe_probe)
{
if(busy_polls == 0)
{
fe_busy_us_per_zone = 0.7f * fe_busy_us_per_zone
+ 0.3f * ((float)predicted_ms * 1000.0f / zones);
}
}
else if(busy_polls > 0)
{
int ready_ms = (int)std::chrono::duration_cast<std::chrono::milliseconds>(
std::chrono::steady_clock::now() - acks_done).count();
fe_busy_us_per_zone = 0.7f * fe_busy_us_per_zone
+ 0.3f * ((float)ready_ms * 1000.0f / zones);
if(fe_busy_us_per_zone > 2000.0f)
{
fe_busy_us_per_zone = 2000.0f;
}
}
}
/*-----------------------------------------------------*\
| Settle the fallback groups: for each |
| function whose ACKs failed the echo compare, |
| commit the group's unacked packets only if |
| the response count covers all of them. |
\*-----------------------------------------------------*/
for(std::pair<const uint8_t, size_t>& group : frame_unmatched_acks)
{
size_t unacked = 0;
for(const PerKeyPacket& packet : frame_packets)
{
if(!packet.acked && packet.function == group.first)
{
unacked++;
}
}
if(group.second == unacked)
{
for(PerKeyPacket& packet : frame_packets)
{
if(!packet.acked && packet.function == group.first)
{
packet.acked = true;
frame_acked_zones.insert(frame_acked_zones.end(),
packet.zone_ids.begin(),
packet.zone_ids.end());
}
}
}
}
result.acked_zones = std::move(frame_acked_zones);
/*-----------------------------------------------------*\
| Adapt the write window. ACK loss is backpressure |
| too: a sent packet that never answered means |
| this link outran the device's response |
| generation, halve the window. A run of loss-free |
| frames earns it back one step at a time. |
\*-----------------------------------------------------*/
if(!frame_packets.empty())
{
size_t lost = 0;
for(const PerKeyPacket& packet : frame_packets)
{
if(!packet.acked)
{
lost++;
}
}
if(lost > 0)
{
perkey_clean_frames = 0;
if(perkey_window > HIDPP20_PERKEY_WINDOW_MIN)
{
perkey_window /= 2;
if(perkey_window < HIDPP20_PERKEY_WINDOW_MIN)
{
perkey_window = HIDPP20_PERKEY_WINDOW_MIN;
}
LOG_DEBUG("%s %zu write ACK(s) lost, write window now %zu",
LOG_TAG, lost, perkey_window);
}
}
else if(perkey_window < HIDPP20_PERKEY_WINDOW_MAX &&
++perkey_clean_frames >= HIDPP20_PERKEY_WINDOW_GROW_AFTER)
{
perkey_clean_frames = 0;
perkey_window++;
}
}
bool complete = result.frame_end_acked &&
(result.acked_zones.size() == result.attempted_zones.size());
if(!complete)
{
/*-------------------------------------------------*\
| Late ACKs from this frame may still be in |
| flight. Consume them so the next frame's |
| matching starts clean. |
\*-------------------------------------------------*/
DrainStaleResponses();
}
if(!result.attempted_zones.empty())
{
std::chrono::steady_clock::time_point frame_done = std::chrono::steady_clock::now();
int send_ms = (int)std::chrono::duration_cast<std::chrono::milliseconds>(
send_done - frame_first_write).count();
int ack_ms = (int)std::chrono::duration_cast<std::chrono::milliseconds>(
acks_done - send_done).count();
int fe_ms = (int)std::chrono::duration_cast<std::chrono::milliseconds>(
frame_done - acks_done).count();
if(complete)
{
LOG_TRACE("%s frame committed: %zu zones, %zu packets (%zu echo-matched) "
"send=%dms ack=%dms fe=%dms pred=%ums busy=%d win=%zu",
LOG_TAG, result.attempted_zones.size(), frame_packets.size(),
frame_exact_acks, send_ms, ack_ms, fe_ms, predicted_ms, busy_polls,
perkey_window);
}
else
{
LOG_DEBUG("%s frame %s: %zu/%zu zones acked (%zu packets, %zu echo-matched), "
"frame_end=%d, send=%dms ack=%dms fe=%dms pred=%ums busy=%d win=%zu",
LOG_TAG, frame_aborted ? "aborted" : "partial",
result.acked_zones.size(), result.attempted_zones.size(),
frame_packets.size(), frame_exact_acks,
(int)result.frame_end_acked, send_ms, ack_ms, fe_ms, predicted_ms,
busy_polls, perkey_window);
}
}
ResetPerKeyFrameState();
/*-----------------------------------------------------*\
| Deep-sleep detection: FrameEnd failures while |
| SLEEPING may mean the firmware fade finished. |
| Count consecutive failures (an aborted frame |
| counts, a stalled stream and a sleeping device |
| look alike); at the threshold, suppress sends |
| until Wake(). Any ACK resets the count. |
\*-----------------------------------------------------*/
if(result.frame_end_acked)
{
consecutive_frame_end_failures.store(0);
}
else if(power_state == HIDPP20_POWER_SLEEPING)
{
int failures = consecutive_frame_end_failures.fetch_add(1) + 1;
if(failures >= HIDPP20_DEEP_SLEEP_FAILURE_THRESHOLD && !deep_sleep.load())
{
deep_sleep.store(true);
LOG_DEBUG("%s Device entered deep sleep (%d consecutive FrameEnd failures)",
LOG_TAG, failures);
}
}
return result;
}
/*---------------------------------------------------------*\
| Feature 0x8080 set + commit: fn3 SetKeyColors on the |
| 0x12 very-long report via dev_perkey_vl, payload |
| [keyType u16 BE, count u16 BE, (keyId,R,G,B) x |
| count], <=14 tuples per packet (larger groups |
| split). Colors appear only after fn5 FlushLEDS. |
\*---------------------------------------------------------*/
void LogitechHIDPP20Controller::SetPerKey8080
(
const std::vector<std::pair<uint16_t, std::vector<std::pair<uint8_t, RGBColor>>>>& by_type
)
{
if(caps.idx_perkey_8080 == 0 || dev_perkey_vl == nullptr)
{
return;
}
bool kt40_id12_only = (caps.quirks & HIDPP20_QUIRK_8080_KEYTYPE40_ID12_ONLY) != 0;
for(size_t t = 0; t < by_type.size(); t++)
{
uint16_t key_type = by_type[t].first;
const std::vector<std::pair<uint8_t, RGBColor>>& src_keys = by_type[t].second;
/*-------------------------------------------------*\
| G410 keyType 0x40 accepts only keyId 1 |
| and 2; drop any others before encoding. |
\*-------------------------------------------------*/
std::vector<std::pair<uint8_t, RGBColor>> filtered;
const std::vector<std::pair<uint8_t, RGBColor>>* keys = &src_keys;
if(kt40_id12_only && key_type == 0x40)
{
for(size_t k = 0; k < src_keys.size(); k++)
{
if(src_keys[k].first == 1 || src_keys[k].first == 2)
{
filtered.push_back(src_keys[k]);
}
}
keys = &filtered;
}
for(size_t off = 0; off < keys->size(); off += HIDPP20_8080_KEYS_PER_FRAME)
{
size_t count = keys->size() - off;
if(count > HIDPP20_8080_KEYS_PER_FRAME)
{
count = HIDPP20_8080_KEYS_PER_FRAME;
}
/*---------------------------------------------*\
| Payload: keyType(u16 BE) + count(u16 BE) + |
| count x (keyId, R, G, B). SendVeryLongFrame |
| prepends the 4-byte HID++ header. |
\*---------------------------------------------*/
uint8_t payload[LOGITECH_VERY_LONG_MESSAGE_LEN - 4];
memset(payload, 0, sizeof(payload));
payload[0] = (uint8_t)(key_type >> 8);
payload[1] = (uint8_t)(key_type & 0xFF);
payload[2] = (uint8_t)(count >> 8);
payload[3] = (uint8_t)(count & 0xFF);
size_t pos = 4;
for(size_t k = 0; k < count; k++)
{
RGBColor color = (*keys)[off + k].second;
payload[pos++] = (*keys)[off + k].first; /* keyId (USB HID usage) */
payload[pos++] = RGBGetRValue(color);
payload[pos++] = RGBGetGValue(color);
payload[pos++] = RGBGetBValue(color);
}
SendVeryLongFrame(caps.idx_perkey_8080, FN_8080_SET_KEY_COLORS,
payload, pos);
}
}
}
/*---------------------------------------------------------*\
| fn5 FlushLEDS: commit. Empty body (persist = default), |
| sent on the 0x11 long report via dev. |
\*---------------------------------------------------------*/
void LogitechHIDPP20Controller::PerKeyCommit8080()
{
if(caps.idx_perkey_8080 == 0)
{
return;
}
uint8_t recv[20] = {};
int result = SendAcked(caps.idx_perkey_8080, FN_8080_FLUSH_LEDS, nullptr, 0,
recv, sizeof(recv), HIDPP20_POLICY_RELIABLE);
if(result <= 0)
{
LOG_DEBUG("%s 0x8080 FlushLEDS commit not acked (result=%d), "
"colors may not have latched", LOG_TAG, result);
}
}
/*---------------------------------------------------------*\
| Zone effects (0x8071 / 0x8070) |
\*---------------------------------------------------------*/
void LogitechHIDPP20Controller::SetZoneEffect
(
uint8_t cluster_idx,
uint8_t effect_idx,
uint16_t effect_id,
unsigned char r,
unsigned char g,
unsigned char b,
uint16_t period,
unsigned char brightness,
unsigned char direction,
bool persist
)
{
if(caps.idx_rgb_effects == 0 || !device_online.load())
{
return;
}
/*-----------------------------------------------------*\
| SetEffectByIndex (fn1 on 0x8071, fn3 on 0x8070) |
| 0x8071/0x0600: [cluster, effect_idx, 10-byte params, |
| persist at [12]] |
| 0x8070: [zone, effect_idx, 10-byte params, |
| persist at [12] (Bit 2-3 Power, |
| Bit 1-0 Persistence)] |
\*-----------------------------------------------------*/
uint8_t data[16];
memset(data, 0, sizeof(data));
data[0] = cluster_idx;
data[1] = effect_idx;
/*-----------------------------------------------------*\
| Build 10-byte params (data[2..11]) per effect type |
| Layouts from protocol docs and observed wire captures |
\*-----------------------------------------------------*/
switch(effect_id)
{
case 0x0001: // Static
data[2] = r;
data[3] = g;
data[4] = b;
/*---------------------------------------------*\
| "Fixed color" marker, only set when there's |
| an actual color. All-black means "Off / |
| pass-through to per-key buffer", which uses |
| byte 5 = 0x00 instead. Shared across pages: |
| 0x8070's func-3 Static tail is R, G, B, |
| 0x02 at byte 5, same position as 0x8071. |
\*---------------------------------------------*/
if(r != 0 || g != 0 || b != 0)
{
data[5] = 0x02;
}
break;
case 0x000A: // Breathing
/*-----------------------------------------------------*\
| Effect param layout (10 bytes, indices into data[]): |
| data[2..4] = R, G, B |
| data[5..6] = periodHi, periodLo (BE16 milliseconds)|
| data[7] = 0 |
| data[8] = brightness 0..100 |
\*-----------------------------------------------------*/
data[2] = r;
data[3] = g;
data[4] = b;
data[5] = (period >> 8) & 0xFF;
data[6] = period & 0xFF;
data[8] = brightness;
break;
case 0x0003: // Color Cycle / Spectrum
/*------------------------------------------------------*\
| Effect param layout (10 bytes, indices into data[]): |
| data[7..8] = periodHi, periodLo (BE16 milliseconds) |
| data[9] = brightness 0..100 |
\*------------------------------------------------------*/
data[7] = (period >> 8) & 0xFF;
data[8] = period & 0xFF;
data[9] = brightness;
break;
case 0x0007: // Audio visualizer
/*------------------------------------------------------*\
| Effect param layout (10 bytes, indices into data[]): |
| data[2] = control: 0 = fixed color, 1 = cycle |
| colors (factory default); >=2 stops |
| the audio pulse |
| data[3..5] = R, G, B (fixed-color pulse) |
| data[7..8] = periodHi, periodLo (BE16 milliseconds) |
\*------------------------------------------------------*/
if(r != 0 || g != 0 || b != 0)
{
data[2] = 0x00;
data[3] = r;
data[4] = g;
data[5] = b;
}
else
{
data[2] = 0x01;
}
data[7] = (period >> 8) & 0xFF;
data[8] = period & 0xFF;
break;
case 0x0004: // Color Wave
/*---------------------------------------------*\
| Plain (non-saturation) wave: the period is |
| split NON-contiguously and there is no |
| saturation byte: |
| data[8] period low |
| data[9] direction (1..8) |
| data[10] brightness 1..100 |
| data[11] period high |
| Distinct from the 0x0016 saturation-wave |
| layout below (saturation@3, period BE@8..9, |
| direction@11); mixing them gets |
| InvalidArgument. |
\*---------------------------------------------*/
data[8] = period & 0xFF;
data[9] = direction;
data[10] = brightness ? brightness : 1;
data[11] = (period >> 8) & 0xFF;
break;
case 0x000B: // Ripple
data[2] = r;
data[3] = g;
data[4] = b;
data[6] = (period >> 8) & 0xFF;
data[7] = period & 0xFF;
break;
case 0x000E: // Decomposition: no color; period BE@8-9, intensity@10
data[8] = (period >> 8) & 0xFF;
data[9] = period & 0xFF;
data[10] = brightness;
break;
case 0x000F: // Signature1: no color; period BE@7-8, intensity@9
case 0x0010: // Signature2: same layout
data[7] = (period >> 8) & 0xFF;
data[8] = period & 0xFF;
data[9] = brightness;
break;
case 0x0015: // Cycle (saturation variant)
/*------------------------------------------------------*\
| Saturation-bearing variant of 0x0003. Param block |
| (10 bytes, indices into data[]): |
| data[3] = saturation 0..255 (hardcoded full) |
| data[8..9] = periodHi, periodLo (BE16 milliseconds) |
| data[10] = intensity 0..100 |
| Layout from Solaar LEDEffects 0x15 (saturation@1, |
| period@6, intensity@8 in the param block). |
\*------------------------------------------------------*/
data[3] = 0xFF;
data[8] = (period >> 8) & 0xFF;
data[9] = period & 0xFF;
data[10] = brightness;
break;
case 0x0016: // Wave (saturation variant)
/*------------------------------------------------------*\
| Saturation-bearing variant of 0x0004. Param block: |
| data[3] = saturation 0..255 (hardcoded full) |
| data[8..9] = periodHi, periodLo (BE16 milliseconds) |
| data[10] = intensity 0..100 |
| data[11] = direction (Logitech wire value) |
| Layout from Solaar LEDEffects 0x16 (saturation@1, |
| period@6, intensity@8, direction@9). The caller maps |
| OpenRGB's 6 direction slots to the wire values. |
\*------------------------------------------------------*/
data[3] = 0xFF;
data[8] = (period >> 8) & 0xFF;
data[9] = period & 0xFF;
data[10] = brightness;
data[11] = direction;
break;
case 0x0017: // Ripple (saturation variant)
/*------------------------------------------------------*\
| Saturation-bearing variant of 0x000B. Param block: |
| data[2..4] = R, G, B |
| data[5] = saturation 0..255 (hardcoded full) |
| data[8..9] = periodHi, periodLo (BE16 milliseconds) |
| Layout from Solaar LEDEffects 0x17 (color@0, |
| saturation@3, period@6). No intensity param. |
\*------------------------------------------------------*/
data[2] = r;
data[3] = g;
data[4] = b;
data[5] = 0xFF;
data[8] = (period >> 8) & 0xFF;
data[9] = period & 0xFF;
break;
default: // Unknown: best-effort
data[2] = r;
data[3] = g;
data[4] = b;
data[5] = (period >> 8) & 0xFF;
data[6] = period & 0xFF;
break;
}
/*-----------------------------------------------------*\
| Inline persist byte at [12]: Persistence bits 1-0, |
| Power bits 2-3. Only a Save sets it, so live painting |
| stays volatile. |
\*-----------------------------------------------------*/
data[12] = persist ? 0x01 : 0x00;
LOG_DEBUG("%s SetEffect cluster=%u idx=%u id=0x%04X "
"data=[%02X %02X %02X %02X %02X %02X %02X %02X "
"%02X %02X %02X %02X %02X %02X %02X %02X]",
LOG_TAG, cluster_idx, effect_idx, effect_id,
data[0], data[1], data[2], data[3],
data[4], data[5], data[6], data[7],
data[8], data[9], data[10], data[11],
data[12], data[13], data[14], data[15]);
blankFAPmessage response;
SendAckedIntoFAP(caps.idx_rgb_effects, caps.fn_set_effect,
data, 16, response);
}
/*---------------------------------------------------------*\
| Feature 0x0620 Headset RGB Hostmode: static color write. |
| |
| Claim is sticky from SetHostMode(); this function |
| only writes colors + FrameEnd. Picks fn5 |
| SetRgbZonesSingleValue when all zones share a |
| color, else fn2 SetIndividualRgbZones. FrameEnd |
| byte 0 is always 0x01 (transient), 0x02 was |
| tested and does not work on G522 firmware. |
\*---------------------------------------------------------*/
void LogitechHIDPP20Controller::SetHeadsetRGBHostmodeColors
(
const std::vector<RGBColor>& zone_colors
)
{
if(caps.idx_headset_rgb_hostmode == 0 || !device_online.load())
{
return;
}
const std::vector<uint8_t>& zones = caps.headset_rgb_hostmode_zone_ids;
if(zones.empty())
{
return;
}
if(zone_colors.empty())
{
return;
}
/*-----------------------------------------------------*\
| Group zones by color, one fn5 per distinct color, |
| then one FrameEnd: Solaar's write_zone_map byte-for- |
| byte. Host mode is already claimed (sticky); the |
| frame is data + FrameEnd only. Zone i takes |
| zone_colors[i], the last color filling any shortfall. |
\*-----------------------------------------------------*/
std::map<RGBColor, std::vector<uint8_t>> groups;
for(size_t i = 0; i < zones.size(); i++)
{
RGBColor c = (i < zone_colors.size()) ? zone_colors[i] : zone_colors.back();
groups[c].push_back(zones[i]);
}
blankFAPmessage response;
for(const std::pair<const RGBColor, std::vector<uint8_t>>& group : groups)
{
RGBColor color = group.first;
const std::vector<uint8_t>& ids = group.second;
/*-------------------------------------------------*\
| fn5 SetRgbZonesSingleValue: |
| [R, G, B, count, zones...] |
\*-------------------------------------------------*/
uint8_t payload[16];
payload[0] = RGBGetRValue(color);
payload[1] = RGBGetGValue(color);
payload[2] = RGBGetBValue(color);
size_t n = ids.size();
if(n > sizeof(payload) - 4) n = sizeof(payload) - 4;
payload[3] = (uint8_t)n;
for(size_t i = 0; i < n; i++)
{
payload[4 + i] = ids[i];
}
SendAckedIntoFAP(caps.idx_headset_rgb_hostmode,
FN_0620_SET_RGB_ZONES_SINGLE_VALUE,
payload, 4 + n, response);
}
/*-----------------------------------------------------*\
| fn6 FrameEnd: byte 0 = 0x01 (transient |
| commit). Never 0x00 (silently discarded) and |
| never 0x02 (tested broken on G522 firmware). |
\*-----------------------------------------------------*/
uint8_t frame_end[4] = { 0x01, 0x00, 0x00, 0x00 };
SendAckedIntoFAP(caps.idx_headset_rgb_hostmode, FN_0620_FRAME_END,
frame_end, sizeof(frame_end), response);
LOG_TRACE("%s 0x0620 wrote %zu zone(s) in %zu color group(s), FrameEnd[0x01]",
LOG_TAG, zones.size(), groups.size());
}
/*---------------------------------------------------------*\
| Power management (idle/dim/sleep/wake) |
| |
| Matches Solaar's RGBPowerManager state machine: |
| ACTIVE -> DIMMING -> IDLE -> SLEEPING |
| |
| Uses firmware onUserActivity events from 0x8071 for |
| idle/active detection. SW control flags cycle: |
| 7 (init) -> 5 (active, monitor idle) -> |
| 3 (idle, monitor active) -> 5 (wake) |
\*---------------------------------------------------------*/
void LogitechHIDPP20Controller::SetRepaintCallback(std::function<void()> repaint)
{
request_repaint_fn = repaint;
}
void LogitechHIDPP20Controller::SetReapplyActiveModeCallback(std::function<bool()> cb)
{
reapply_active_mode_fn = cb;
}
void LogitechHIDPP20Controller::SetPairingName(const std::string& name)
{
if(!LogitechHIDPP20Controller::NameLooksReal(name))
{
return;
}
pairing_name = name;
/*-----------------------------------------------------*\
| Label the controller while the device is asleep. |
| The real 0x0005 name read replaces this once the |
| device answers. |
\*-----------------------------------------------------*/
if(caps.device_name.empty())
{
caps.device_name = name;
log_tag = "[LogitechHID++ " + name + "]";
}
}
HIDPP20PowerState LogitechHIDPP20Controller::GetPowerState() const
{
return power_state;
}
int LogitechHIDPP20Controller::GetDimBrightness() const
{
return dim_brightness_pct.load();
}
bool LogitechHIDPP20Controller::HasBridge() const
{
return transport.bridge_feat_idx != 0;
}
bool LogitechHIDPP20Controller::IsOnline() const
{
return device_online.load();
}
bool LogitechHIDPP20Controller::IsDeepSleep() const
{
return deep_sleep.load();
}
void LogitechHIDPP20Controller::ReprobeSubDevice()
{
/*-----------------------------------------------------*\
| Called by the power thread when a sub-device |
| connects through the Centurion bridge. The reader |
| thread is running, so all commands go through |
| SendAndRead -> ReadFromQueue. |
| |
| We clear the sub-device feature cache and |
| re-discover everything. The bridge_feat_idx and |
| dongle name are kept. |
\*-----------------------------------------------------*/
LOG_DEBUG("%s Re-probing sub-device through bridge", LOG_TAG);
/*-----------------------------------------------------*\
| Let the sub-device settle after connection before |
| sending commands through the bridge. |
\*-----------------------------------------------------*/
std::this_thread::sleep_for(std::chrono::milliseconds(500));
FlushResponseQueue();
/*-----------------------------------------------------*\
| Clear sub-device feature map but keep bridge index. |
| This forces fresh lookups through the bridge. |
\*-----------------------------------------------------*/
caps.feature_map.clear();
caps.feature_map_complete = false;
caps.has_zone_effects = false;
caps.has_perkey = false;
caps.has_effect_cards = false;
caps.effect_card_template[0] = 0;
caps.effect_card_template[1] = 0;
caps.zone_clusters.clear();
caps.perkey_zone_ids.clear();
caps.idx_rgb_effects = 0;
caps.idx_perkey_v2 = 0;
caps.idx_perkey_v1 = 0;
caps.idx_profile_management = 0;
caps.idx_onboard_profiles = 0;
caps.idx_disable_keys_by_usage = 0;
caps.fn_set_effect = 0;
caps.fn_sw_control = 0;
caps.fn_pwr_config = 0;
caps.fn_pwr_mode = 0;
caps.has_power_mgmt = false;
caps.sw_control_simple = false;
caps.nv_sleep_ramp_known = false;
caps.nv_sleep_ramp_enabled = false;
caps.nv_sleep_ramp_seconds = 0;
/*-----------------------------------------------------*\
| Re-populate feature map. CenturionFeatureSet |
| is always at index 1 on the sub-device. |
\*-----------------------------------------------------*/
EnumerateFeatures(1);
if(!caps.feature_map_complete)
{
LOG_DEBUG("%s Sub-device not reachable after connect event", LOG_TAG);
caps.feature_map_complete = true;
return;
}
/*-----------------------------------------------------*\
| The sub-device's real name only becomes |
| readable now that it's reachable, so always re- |
| discover, but never let a failed re-read |
| downgrade a good name to a placeholder. |
\*-----------------------------------------------------*/
std::string old_name = caps.device_name;
DiscoverDeviceName();
if(HIDPP20NameIsPlaceholder(caps.device_name) && !HIDPP20NameIsPlaceholder(old_name))
{
caps.device_name = old_name;
}
if(caps.device_name != old_name)
{
log_tag = "[LogitechHID++ " + caps.device_name + "]";
}
DiscoverDeviceType();
DiscoverFirmwareInfo();
/*-----------------------------------------------------*\
| Discover RGB features |
\*-----------------------------------------------------*/
caps.idx_profile_management = GetFeatureIndex(HIDPP20_FEAT_PROFILE_MANAGEMENT);
caps.idx_onboard_profiles = GetFeatureIndex(HIDPP20_FEAT_ONBOARD_PROFILES);
caps.idx_disable_keys_by_usage = GetFeatureIndex(HIDPP20_FEAT_DISABLE_KEYS_BY_USAGE);
DiscoverRGBEffects();
if(caps.idx_rgb_effects == 0)
{
DiscoverHeadsetRGBHostmode();
}
DiscoverPerKeyZones();
DiscoverPerKey8080();
DiscoverKeyboardLayout();
if(!caps.has_zone_effects && !caps.has_perkey && !caps.has_perkey_8080)
{
LOG_DEBUG("%s Sub-device has no RGB features", LOG_TAG);
return;
}
LOG_INFO("%s Sub-device probed: zones=%zu perkey=%zu",
LOG_TAG, caps.zone_clusters.size(), caps.perkey_zone_ids.size());
/*-----------------------------------------------------*\
| Bring the sub-device back up on the existing |
| controller. A dongle with no sub-device at |
| detection never got a controller, so |
| DetectionManager re-probes until one answers. |
\*-----------------------------------------------------*/
Initialize();
}
/*---------------------------------------------------------*\
| Take software control and retry until it sticks: a |
| device that just came back is booting its onboard |
| profile, and a claim in that window is dropped silently; |
| we would paint at a device that is not listening. Retry |
| on a fast backoff until ReapplyActiveMode reports the |
| claim ACKed (~50ms in practice). |
\*---------------------------------------------------------*/
bool LogitechHIDPP20Controller::ReclaimSWControl(const char* reason, bool force)
{
/*-----------------------------------------------------*\
| force (reconnect): the device just rebooted its |
| onboard profile, so any claim flag is stale, tear |
| it down so every attempt runs the whole sequence |
| instead of believing it already holds control. |
| |
| !force: a set flag means the effect engine's own |
| repaint re-claimed here first. Leave it: redoing the |
| flags 6->5 claim re-exposes the firmware's onboard |
| colors for ~50ms, a visible flash. The reapply below |
| still runs DeviceUpdateMode (per-key prep lands |
| either way); the ClaimSWControlIfNeeded inside it |
| no-ops while claimed. |
\*-----------------------------------------------------*/
if(force || !sw_control_claimed)
{
sw_control_claimed = false;
sw_control_needs_upgrade_to_5 = false;
prep_applied = false;
retry_paint_deadline_.store(std::chrono::steady_clock::time_point{});
retry_paint_attempt_.store(0);
}
size_t attempt_count = sizeof(HIDPP20_RECLAIM_BACKOFF_MS) / sizeof(uint16_t);
for(size_t i = 0; i < attempt_count; i++)
{
if(HIDPP20_RECLAIM_BACKOFF_MS[i] > 0)
{
InterruptibleBackoff(HIDPP20_RECLAIM_BACKOFF_MS[i]);
}
if(!device_online.load())
{
return false;
}
if(teardown_pending.load())
{
LOG_DEBUG("%s SW control claim abandoned, link change pending", LOG_TAG);
return false;
}
if(reapply_active_mode_fn && reapply_active_mode_fn())
{
LOG_INFO("%s SW control claimed after %s (attempt %zu/%zu)",
LOG_TAG, reason, i + 1, attempt_count);
return true;
}
}
LOG_WARNING("%s SW control claim failed after %s (%zu attempts); the device is still "
"showing its onboard profile", LOG_TAG, reason, attempt_count);
return false;
}
void LogitechHIDPP20Controller::ReconnectDevice()
{
/*-----------------------------------------------------*\
| Called by power thread when a WirelessStatus |
| reconnect event arrives. Race the firmware |
| boot animation: hammer the SW-control claim |
| + per-key push on a fast-backoff schedule |
| until the claim ACKs (matches the vendor |
| app, which lands control in ~50ms). |
| |
| Both firmware events (reconnect=1/config_needed=1 |
| then config_needed=0) drive the same retry loop. One |
| push per event is not enough: it either races the |
| boot animation or lands after it, and an unretried |
| claim lets the 10s firmware watchdog drop the device |
| back to onboard mode. |
\*-----------------------------------------------------*/
LOG_DEBUG("%s Reconnecting device", LOG_TAG);
FlushResponseQueue();
bool first_event = !device_online.load();
if(first_event)
{
device_online.store(true);
consecutive_timeouts.store(0);
frame_counter = 0;
{
std::lock_guard<std::mutex> lock(power_mutex);
dim_brightness_pct.store(100);
power_state = HIDPP20_POWER_ACTIVE;
}
}
last_fap_error_ = 0;
ReclaimSWControl("reconnect", true);
/*-----------------------------------------------------*\
| Catch a stale restored map whose reclaim raced the |
| radio and didn't surface the mismatch. |
\*-----------------------------------------------------*/
HealStaleMapIfNeeded("reconnect (post-heal)");
if(first_event && caps.has_power_mgmt)
{
ReadFirmwareTimers();
ReadNvSleepRampConfig();
}
}
bool LogitechHIDPP20Controller::DiscoveryInProgress() const
{
return discovery_in_progress_.load();
}
void LogitechHIDPP20Controller::RediscoverFeatures()
{
/*-----------------------------------------------------*\
| Clear the cached feature map and its derivations, |
| then re-run discovery on the current handle. Each |
| link assigns different indices to the same |
| features (G515: RGBEffects at 0x09 wireless, |
| elsewhere on USB); a stale map turns every cached |
| lookup into error 0x07. Caller owns state outside |
| the map (claim flag, counters, threads). |
| |
| Fence the effect engine out during discovery: |
| has_perkey and the zone/effect data flap false, so a |
| paint/claim landing here would reach flags=5 with an |
| empty per-key layer. DeviceUpdateLEDs gates on this. |
\*-----------------------------------------------------*/
discovery_in_progress_.store(true);
caps.feature_map.clear();
caps.feature_map_complete = false;
caps.has_zone_effects = false;
caps.has_perkey = false;
caps.has_effect_cards = false;
caps.effect_card_template[0] = 0;
caps.effect_card_template[1] = 0;
caps.zone_clusters.clear();
caps.perkey_zone_ids.clear();
caps.idx_rgb_effects = 0;
caps.idx_perkey_v2 = 0;
caps.idx_perkey_v1 = 0;
caps.idx_wireless_status = 0;
caps.idx_profile_management = 0;
caps.idx_onboard_profiles = 0;
caps.idx_disable_keys_by_usage = 0;
caps.fn_set_effect = 0;
caps.fn_sw_control = 0;
caps.fn_pwr_config = 0;
caps.fn_pwr_mode = 0;
caps.has_power_mgmt = false;
caps.sw_control_simple = false;
caps.nv_sleep_ramp_known = false;
caps.nv_sleep_ramp_enabled = false;
caps.nv_sleep_ramp_seconds = 0;
/*-----------------------------------------------------*\
| idx_unified_battery lives outside caps |
| (discovered lazily by QueryExternalPower on first |
| use) so it isn't cleared by the caps reset above. |
| Clear it here too so the next QueryExternalPower |
| call re-probes on the new path, the old path's |
| feature index may not exist, or may map to a |
| different feature entirely, on the new map. |
\*-----------------------------------------------------*/
idx_unified_battery = 0;
last_power_raw = 0xFFFF;
/*-----------------------------------------------------*\
| Clearing the index disarms the broadcast match until |
| a read resolves it again, and the source often |
| changed with the link. |
\*-----------------------------------------------------*/
pending_power_check.store(true);
/*-----------------------------------------------------*\
| Force ApplyPowerSavingProfile's dedup to |
| re-emit its "Idle management: ..." line on |
| the next call so a path transition always |
| produces a full state confirmation in the |
| log, symmetric with the QueryExternalPower |
| re-log. Inverting ps_last_logged_external |
| guarantees the boolean comparison trips |
| regardless of the current power state. |
\*-----------------------------------------------------*/
ps_last_logged_pct = -1;
ps_last_logged_idle = -1;
ps_last_logged_sleep = -1;
ps_last_logged_external = !ps_on_external_power;
/*-----------------------------------------------------*\
| Standard HID++ features are looked up on-demand, no |
| bulk enumeration needed. Just re-discover everything. |
\*-----------------------------------------------------*/
DiscoverDeviceName();
log_tag = "[LogitechHID++ " + caps.device_name + "]";
DiscoverDeviceType();
DiscoverFirmwareInfo();
caps.idx_profile_management = GetFeatureIndex(HIDPP20_FEAT_PROFILE_MANAGEMENT);
caps.idx_onboard_profiles = GetFeatureIndex(HIDPP20_FEAT_ONBOARD_PROFILES);
caps.idx_wireless_status = GetFeatureIndex(HIDPP20_FEAT_WIRELESS_STATUS);
caps.idx_disable_keys_by_usage = GetFeatureIndex(HIDPP20_FEAT_DISABLE_KEYS_BY_USAGE);
DiscoverRGBEffects();
if(caps.idx_rgb_effects == 0)
{
DiscoverHeadsetRGBHostmode();
}
DiscoverPerKeyZones();
DiscoverPerKey8080();
DiscoverKeyboardLayout();
/*-----------------------------------------------------*\
| Discovery done and the map is whole, so let the |
| effect engine paint again and cache this link |
| for a switch-back. |
\*-----------------------------------------------------*/
discovery_in_progress_.store(false);
CacheCurrentLinkIndexMap();
}
/*---------------------------------------------------------*\
| Per-link feature-index cache: indices are assigned per |
| transport, so a switch-back restores instead of |
| rediscovering. |
\*---------------------------------------------------------*/
std::string LogitechHIDPP20Controller::CurrentLinkKey() const
{
/*-----------------------------------------------------*\
| Key the link: rx#slot over the dongle, usb#idx |
| direct. hidraw paths are reused by the kernel so |
| aren't used. A slot collision across dongles is |
| caught by the reclaim self-heal. |
\*-----------------------------------------------------*/
return std::string(wireless ? "rx#" : "usb#") + std::to_string((int)device_index);
}
HIDPP20LinkIndexMap LogitechHIDPP20Controller::SnapshotLinkIndexMap() const
{
/*-----------------------------------------------------*\
| Snapshot all of caps, not just indices: the effect- |
| card template, zone clusters and per-key data are |
| cleared and rediscovered per link too, so a partial- |
| index restore would run prep with an empty template. |
\*-----------------------------------------------------*/
HIDPP20LinkIndexMap m;
m.caps = caps;
m.idx_unified_battery = idx_unified_battery;
m.valid = true;
return m;
}
void LogitechHIDPP20Controller::RestoreLinkIndexMap(const HIDPP20LinkIndexMap& m)
{
caps = m.caps;
idx_unified_battery = m.idx_unified_battery;
}
void LogitechHIDPP20Controller::CacheCurrentLinkIndexMap()
{
/*-----------------------------------------------------*\
| Skip an empty map and Centurion bridge sub-devices |
| (their indices route through the bridge). |
\*-----------------------------------------------------*/
if(caps.idx_rgb_effects == 0 || transport.bridge_feat_idx != 0)
{
return;
}
/*-----------------------------------------------------*\
| Don't cache a partial discovery over a good |
| entry: a flaky link can find RGB effects but |
| read back an empty effect-card template. |
\*-----------------------------------------------------*/
if(caps.has_effect_cards
&& caps.effect_card_template[0] == 0
&& caps.effect_card_template[1] == 0)
{
return;
}
link_index_cache_[CurrentLinkKey()] = SnapshotLinkIndexMap();
}
void LogitechHIDPP20Controller::HealStaleMapIfNeeded(const char* reclaim_reason)
{
/*-----------------------------------------------------*\
| A reclaim hitting 0x06/0x07 means the loaded map is |
| wrong (re-paired slot). Drop the entry, rediscover, |
| reclaim once. No re-check, so it can't loop. A |
| no-response failure leaves last_fap_error_ 0, so this |
| only fires on a real index mismatch. |
\*-----------------------------------------------------*/
if(last_fap_error_ != 0x06 && last_fap_error_ != 0x07)
{
return;
}
LOG_WARNING("%s Feature map for %s rejected (err 0x%02X), rediscovering",
LOG_TAG, CurrentLinkKey().c_str(), last_fap_error_);
link_index_cache_.erase(CurrentLinkKey());
RediscoverFeatures();
last_fap_error_ = 0;
ReclaimSWControl(reclaim_reason, false);
}
void LogitechHIDPP20Controller::StartEventWatcher()
{
/*-----------------------------------------------------*\
| Reader and power threads without power management, |
| for devices whose only events are WirelessStatus, |
| and for receiver-slot devices with no events of |
| their own, so the node watcher's connection nudge |
| lands on a power thread. |
\*-----------------------------------------------------*/
if(reader_running)
{
return;
}
pending_connection = 0;
reader_running = true;
reader_thread = new std::thread(&LogitechHIDPP20Controller::ReaderThreadFunc, this);
power_thread_running = true;
power_thread = new std::thread(&LogitechHIDPP20Controller::PowerThreadFunc, this);
LOG_DEBUG("%s Event watcher started", LOG_TAG);
}
void LogitechHIDPP20Controller::StartPowerManager()
{
if(caps.idx_rgb_effects == 0 || !caps.has_power_mgmt)
{
return;
}
if(reader_running)
{
return;
}
/*-----------------------------------------------------*\
| Cache the boot link's index map (initial |
| discovery ran via Initialize, not |
| RediscoverFeatures) so the first switch away and |
| back restores instead of rediscovering. |
\*-----------------------------------------------------*/
CacheCurrentLinkIndexMap();
ReadFirmwareTimers();
ReadNvSleepRampConfig();
ReadActiveProfileSector();
LogitechHIDPP20IdleSettings::instance()->load();
QueryExternalPower();
ApplyPowerSavingProfile();
/*-----------------------------------------------------*\
| Seed the periodic idle-settings poll clock |
| so the first tick of the power thread's |
| 500ms re-read happens one interval from now, |
| not immediately (we just applied above). |
\*-----------------------------------------------------*/
last_idle_poll = std::chrono::steady_clock::now();
last_power_poll = last_idle_poll;
pending_power_check.store(false);
/*-----------------------------------------------------*\
| Don't claim SW control here. The device runs its |
| firmware effect (or saved hardware profile) until |
| DeviceUpdateLEDs is called for the first time, at |
| which point claim + push happen atomically. |
| |
| Reader and power threads still start so we can detect |
| migration events (USB plug-in) and process activity |
| events once SW control is eventually claimed. |
\*-----------------------------------------------------*/
power_state = HIDPP20_POWER_ACTIVE;
pending_activity = -1;
reader_running = true;
reader_thread = new std::thread(&LogitechHIDPP20Controller::ReaderThreadFunc, this);
power_thread_running = true;
power_thread = new std::thread(&LogitechHIDPP20Controller::PowerThreadFunc, this);
LOG_DEBUG("%s Power manager started (idle=%us sleep=%us)",
LOG_TAG, idle_timeout_s, sleep_timeout_s);
}
void LogitechHIDPP20Controller::StopPowerManager()
{
if(!reader_running && !power_thread_running)
{
return;
}
/*-----------------------------------------------------*\
| Stop the power thread first (it may be waiting |
| on the queue). |
\*-----------------------------------------------------*/
power_thread_running = false;
response_cv.notify_all();
if(power_thread && power_thread->joinable())
{
power_thread->join();
}
delete power_thread;
power_thread = nullptr;
/*-----------------------------------------------------*\
| Then stop reader thread |
\*-----------------------------------------------------*/
reader_running = false;
if(reader_thread && reader_thread->joinable())
{
reader_thread->join();
}
delete reader_thread;
reader_thread = nullptr;
/*-----------------------------------------------------*\
| Wake if we were dimmed/sleeping so Shutdown() can |
| cleanly release SW control. |
\*-----------------------------------------------------*/
if(power_state != HIDPP20_POWER_ACTIVE)
{
Wake();
}
LOG_DEBUG("%s Power manager stopped", LOG_TAG);
}
void LogitechHIDPP20Controller::ReaderThreadFunc()
{
/*-----------------------------------------------------*\
| Sole HID reader. NEVER sends commands; |
| that would deadlock (we'd wait on our own |
| queue for the response). Events are |
| flagged via atomic for the power thread. |
\*-----------------------------------------------------*/
while(reader_running.load())
{
uint8_t feat = 0, func = 0;
uint8_t data[60] = {};
int result = ReadHIDDirect(&feat, &func, data, sizeof(data), 50);
if(result < 0)
{
/*---------------------------------------------*\
| HID read error: device handle is invalid |
| (device physically removed). Mark |
| offline and sleep to avoid spinning. |
\*---------------------------------------------*/
if(device_online.load())
{
LOG_DEBUG("%s HID read error: device removed", LOG_TAG);
device_online.store(false);
}
std::this_thread::sleep_for(std::chrono::milliseconds(100));
continue;
}
if(result > 0)
{
/*---------------------------------------------*\
| Check for firmware events first. Events are |
| flagged for the power thread and NOT added to |
| the response queue; they aren't command |
| responses and would pollute the queue. |
\*---------------------------------------------*/
if(caps.idx_rgb_effects != 0 &&
feat == caps.idx_rgb_effects &&
(func & 0xF0) == 0x10 &&
(func & 0x0F) != HIDPP20_SW_ID)
{
pending_activity.store((int)data[0]);
continue;
}
/*---------------------------------------------*\
| Feature 0x1D4B event 0: WirelessStatus |
| Device reconnected after power cycle. Use |
| cached map lookup only, reader thread |
| must never send commands (deadlock risk). |
\*---------------------------------------------*/
{
std::map<uint16_t, uint8_t>::const_iterator it = caps.feature_map.find(0x1D4B);
uint8_t ws_idx = (it != caps.feature_map.end()) ? it->second : 0;
if(ws_idx != 0 && feat == ws_idx &&
(func & 0xF0) == 0x00 &&
(func & 0x0F) != HIDPP20_SW_ID)
{
uint8_t reconnect = data[0];
uint8_t config_needed = data[1];
LOG_DEBUG("%s WirelessStatus event: reconnect=%d config_needed=%d",
LOG_TAG, reconnect, config_needed);
/*-------------------------------------*\
| Forward both events to the power |
| thread. Each call into |
| ReconnectDevice runs the fast- |
| backoff reclaim loop, so the |
| second event acts as a belt-and- |
| suspenders re-claim once the |
| firmware boot fully settles. |
\*-------------------------------------*/
pending_connection.store(1);
continue;
}
}
/*---------------------------------------------*\
| Feature 0x1004 broadcast: the power source |
| changed. Flag a re-read rather than decode |
| the event, so GetStatus stays the only |
| reader of the layout. Cached index only, |
| this thread must never send commands. |
\*---------------------------------------------*/
if(idx_unified_battery != 0 && feat == idx_unified_battery &&
(func & 0x0F) != HIDPP20_SW_ID)
{
pending_power_check.store(true);
continue;
}
/*---------------------------------------------*\
| Only queue responses to OUR commands. Our |
| commands use HIDPP20_SW_ID (0x0A) in the |
| low nibble. Firmware-generated messages |
| (battery, sync, etc.) use SW_ID 0, drop |
| those silently. Error responses |
| (feat=0xFF) are always queued. |
\*---------------------------------------------*/
if(feat != 0xFF && (func & 0x0F) != HIDPP20_SW_ID)
{
continue;
}
{
std::lock_guard<std::mutex> lock(response_mutex);
HIDPP20RawMessage msg;
msg.feat = feat;
msg.func = func;
msg.result = result;
memcpy(msg.data, data, sizeof(msg.data));
response_queue.push_back(msg);
}
response_cv.notify_all();
}
}
}
void LogitechHIDPP20Controller::PowerThreadFunc()
{
/*-----------------------------------------------------*\
| Handles power state machine and sends commands. Reads |
| responses from the queue (filled by reader thread). |
\*-----------------------------------------------------*/
while(power_thread_running.load())
{
/*-------------------------------------------------*\
| 1. Check for pending firmware events |
\*-------------------------------------------------*/
int activity = pending_activity.exchange(-1);
if(activity >= 0)
{
std::lock_guard<std::mutex> lock(power_mutex);
OnUserActivity((uint8_t)activity);
}
/*-------------------------------------------------*\
| 1b. Check for connection state changes |
\*-------------------------------------------------*/
int connection = pending_connection.exchange(0);
if(connection > 0)
{
if(HasBridge())
{
ReprobeSubDevice();
}
else
{
ReconnectDevice();
}
}
else if(connection < 0)
{
LOG_DEBUG("%s Device disconnected", LOG_TAG);
device_online.store(false);
}
/*-------------------------------------------------*\
| 2. Power management timing |
\*-------------------------------------------------*/
{
std::lock_guard<std::mutex> lock(power_mutex);
switch(power_state)
{
case HIDPP20_POWER_DIMMING:
{
std::chrono::steady_clock::time_point now = std::chrono::steady_clock::now();
if(now >= next_dim_time)
{
DimRampStep();
next_dim_time = now + std::chrono::milliseconds(DIM_INTERVAL_MS);
}
break;
}
case HIDPP20_POWER_IDLE:
/*-------------------------------------*\
| Poll dim brightness target, if the |
| user is dragging the slider, |
| ps_dim_target_pct updates in- |
| memory and we pick it up here on |
| the next 50ms tick without any |
| callback/repaint chain. |
| |
| Gated on ps_dim_enabled: a profile |
| (or the default unconfigured |
| fallback) can enter IDLE state via |
| the skip-dim path in OnUserActivity, |
| and we must not dim in that case: |
| only sleep when the deadline hits. |
\*-------------------------------------*/
if(ps_dim_enabled &&
dim_brightness_pct.load() != ps_dim_target_pct)
{
dim_brightness_pct.store(ps_dim_target_pct);
if(request_repaint_fn)
{
request_repaint_fn();
}
}
if(sleep_timeout_s > 0 && ps_sleep_enabled &&
std::chrono::steady_clock::now() >= sleep_deadline)
{
StartSleep();
}
break;
default:
break;
}
}
/*-------------------------------------------------*\
| Read the power source on the device's broadcast. |
| Each read is a 0x1004 GetStatus on the link that |
| also carries paint, so the interval is only the |
| backstop for devices that do not broadcast and |
| for changes made while asleep. |
| |
| The idle-settings reload keeps its own fast tick: |
| it is an in-memory lookup and only reaches the |
| wire when a timer value changes. |
\*-------------------------------------------------*/
if(caps.has_power_mgmt)
{
std::chrono::steady_clock::time_point now = std::chrono::steady_clock::now();
if(pending_power_check.exchange(false)
|| now - last_power_poll >= std::chrono::milliseconds(POWER_POLL_INTERVAL_MS))
{
last_power_poll = now;
QueryExternalPower();
}
if(now - last_idle_poll >= std::chrono::milliseconds(500))
{
last_idle_poll = now;
ApplyPowerSavingProfile();
}
}
/*-------------------------------------------------*\
| Fire any pending retry-paint whose |
| deadline has come due. The callback runs |
| DeviceUpdateLEDs on this thread's context, |
| not recursively inside another call. |
\*-------------------------------------------------*/
TickRetryPaintIfPending();
std::this_thread::sleep_for(std::chrono::milliseconds(50));
}
}
bool LogitechHIDPP20Controller::IsCurrentlyWireless() const
{
return wireless;
}
bool LogitechHIDPP20Controller::QueryExternalPower()
{
/*-----------------------------------------------------*\
| Query HID++ 2.0 feature 0x1004 |
| (UnifiedBattery) fn1 GetStatus and determine |
| whether the device is drawing external power. |
| |
| Response layout: byte 2: Charging Status 0 = |
| Discharging 1 = Charging (wired) 2 = Charging |
| (slow) 3 = Complete 4 = Error 5 = Wireless |
| Charging byte 3: External Power Status 0 = no |
| external power non-zero = external power present |
| |
| We consider the device externally powered if |
| EITHER byte is non-zero: some devices leave byte 3 |
| at 0 whenever they are actively charging and rely |
| on byte 2 alone to signal the wired state. The |
| pre-refactor QueryOnBattery used the same OR |
| semantic (expressed from the on-battery side) and |
| was known to work across the Logitech lineup. |
| |
| Updates ps_on_external_power and returns |
| the new value. On failure returns the |
| cached value without touching it. |
\*-----------------------------------------------------*/
if(caps.idx_rgb_effects == 0 || !caps.has_power_mgmt)
{
return ps_on_external_power;
}
if(idx_unified_battery == 0)
{
idx_unified_battery = GetFeatureIndex(HIDPP20_FEAT_UNIFIED_BATTERY,
HIDPP20_POLICY_PROBE);
if(idx_unified_battery == 0)
{
/*---------------------------------------------*\
| Device doesn't expose UnifiedBattery. |
| Wired-only devices (no battery) report the |
| feature absent; we treat them as |
| permanently externally powered. |
\*---------------------------------------------*/
ps_on_external_power = true;
return ps_on_external_power;
}
}
uint8_t send_data[1] = {0};
uint8_t recv_data[16] = {};
int result = SendAcked(idx_unified_battery, 0x10,
send_data, 0, recv_data, sizeof(recv_data),
HIDPP20_POLICY_PROBE);
if(result <= 0)
{
LOG_TRACE("%s QueryExternalPower: GetStatus failed (result=%d): using cached",
LOG_TAG, result);
return ps_on_external_power;
}
uint8_t charge_status = recv_data[2];
uint8_t external_power = recv_data[3];
ps_on_external_power = (charge_status != 0) || (external_power != 0);
uint16_t raw = ((uint16_t)charge_status << 8) | external_power;
if(raw != last_power_raw)
{
last_power_raw = raw;
LOG_TRACE("%s QueryExternalPower: charge_status=%u external_power=%u -> %s",
LOG_TAG, charge_status, external_power,
ps_on_external_power ? "external" : "battery");
}
return ps_on_external_power;
}
void LogitechHIDPP20Controller::ApplyPowerSavingProfile()
{
/*-----------------------------------------------------*\
| Re-read the JSON every invocation. This is a cheap |
| in-memory SettingsManager hash lookup + a handful |
| of field copies, safe to do on every 500ms power- |
| thread tick. Any write from the plugin (or a manual |
| JSON edit) therefore applies within one poll |
| interval without any cross-boundary signalling. |
\*-----------------------------------------------------*/
LogitechHIDPP20IdleSettings* settings = LogitechHIDPP20IdleSettings::instance();
settings->load();
bool prev_dim = ps_dim_enabled;
bool prev_sleep = ps_sleep_enabled;
/*-----------------------------------------------------*\
| Start from the firmware-timer baseline. Both the |
| configured and unconfigured paths return to these if |
| they don't explicitly override, so a profile that |
| sets idle_timeout_s does not leave a stale value |
| behind after the user resets to an empty config. |
\*-----------------------------------------------------*/
idle_timeout_s = fw_idle_timeout_s;
sleep_timeout_s = fw_sleep_timeout_s;
if(!settings->isConfigured())
{
/*-------------------------------------------------*\
| Unconfigured: no plugin in use. We still hold SW |
| control so firmware will NOT dim or sleep |
| autonomously; it only emits idle events and |
| expects the host to act. Run a basic default |
| profile ourselves: no dim on idle (OpenRGB users |
| generally expect lights to stay on), but still go |
| to sleep at the firmware-configured timeout. |
\*-------------------------------------------------*/
ps_dim_enabled = false;
ps_dim_target_pct = DIM_TARGET_PCT;
ps_sleep_enabled = true;
/*-------------------------------------------------*\
| Restore firmware defaults if we previously wrote |
| custom values from a plugin profile. |
\*-------------------------------------------------*/
if(written_idle_s != fw_idle_timeout_s || written_sleep_s != fw_sleep_timeout_s)
{
WritePowerConfig(fw_idle_timeout_s, fw_sleep_timeout_s);
written_idle_s = fw_idle_timeout_s;
written_sleep_s = fw_sleep_timeout_s;
}
if(prev_dim != ps_dim_enabled || prev_sleep != ps_sleep_enabled ||
ps_last_logged_pct != ps_dim_target_pct ||
ps_last_logged_idle != (int)idle_timeout_s ||
ps_last_logged_sleep != (int)sleep_timeout_s ||
ps_last_logged_external != ps_on_external_power)
{
ps_last_logged_pct = ps_dim_target_pct;
ps_last_logged_idle = idle_timeout_s;
ps_last_logged_sleep = sleep_timeout_s;
ps_last_logged_external = ps_on_external_power;
LOG_DEBUG("%s Idle management: defaults (dim=off, firmware sleep=%us)",
LOG_TAG, sleep_timeout_s);
}
return;
}
/*-----------------------------------------------------*\
| Configured: pick the active profile based on |
| whether the device is currently externally |
| powered. ps_on_external_power is refreshed by |
| QueryExternalPower() when the device broadcasts a |
| change, and on the backstop interval. |
\*-----------------------------------------------------*/
const LogitechHIDPP20IdleProfile& profile = ps_on_external_power
? settings->pluggedIn()
: settings->onBattery();
ps_dim_enabled = profile.dim_when_idle;
ps_dim_target_pct = profile.dim_when_idle ? profile.dim_brightness : DIM_TARGET_PCT;
ps_sleep_enabled = profile.allow_sleep;
if(profile.dim_when_idle)
{
idle_timeout_s = (uint16_t)profile.idle_timeout_s;
}
/* else: idle_timeout_s stays at fw_idle_timeout_s from above */
if(profile.allow_sleep)
{
sleep_timeout_s = (uint16_t)profile.sleep_timeout_s;
}
else
{
/*-------------------------------------------------*\
| Signal "don't sleep" to the state machine. |
| The IDLE branch of PowerThreadFunc gates |
| on sleep_timeout_s>0. |
\*-------------------------------------------------*/
sleep_timeout_s = 0;
}
/*-----------------------------------------------------*\
| Write our timer values to the device RAM so |
| the firmware's idle detection aligns with |
| our host-side state machine. Only writes |
| when values actually change to avoid |
| spamming the bus on every 500ms poll tick. |
\*-----------------------------------------------------*/
if(idle_timeout_s != written_idle_s || sleep_timeout_s != written_sleep_s)
{
WritePowerConfig(idle_timeout_s, sleep_timeout_s);
written_idle_s = idle_timeout_s;
written_sleep_s = sleep_timeout_s;
}
if(prev_dim != ps_dim_enabled || prev_sleep != ps_sleep_enabled ||
ps_last_logged_pct != ps_dim_target_pct ||
ps_last_logged_idle != (int)idle_timeout_s ||
ps_last_logged_sleep != (int)sleep_timeout_s ||
ps_last_logged_external != ps_on_external_power)
{
ps_last_logged_pct = ps_dim_target_pct;
ps_last_logged_idle = idle_timeout_s;
ps_last_logged_sleep = sleep_timeout_s;
ps_last_logged_external = ps_on_external_power;
LOG_DEBUG("%s Idle management: power=%s dim=%s(%d%%) idle=%us sleep=%s(%us)",
LOG_TAG,
ps_on_external_power ? "external" : "battery",
ps_dim_enabled ? "on" : "off", ps_dim_target_pct,
idle_timeout_s,
ps_sleep_enabled ? "on" : "off", sleep_timeout_s);
}
}
void LogitechHIDPP20Controller::FlushResponseQueue()
{
{
std::lock_guard<std::mutex> lock(response_mutex);
response_queue.clear();
}
/*-----------------------------------------------------*\
| Before the reader thread exists, stale frames sit in |
| the hidraw fd buffer. A HID++ reply carries nothing |
| tying it to its request, every IRoot answer has the |
| same 0x00/0x00 header, so a late reply from a timed- |
| out call is accepted as the next call's answer and |
| every lookup after it is off by one. Drain first. |
\*-----------------------------------------------------*/
if(reader_running.load() || dev == nullptr)
{
return;
}
uint8_t scratch[64];
for(int drained = 0; drained < 64; drained++)
{
if(hid_read_timeout(dev, scratch, sizeof(scratch), 0) <= 0)
{
break;
}
}
}
void LogitechHIDPP20Controller::DispatchEvent
(
uint8_t feat,
uint8_t func,
const uint8_t* data
)
{
if(caps.idx_rgb_effects == 0 || data == nullptr)
{
return;
}
/*-----------------------------------------------------*\
| onUserActivity = event 1 on RGB Effects (0x8071) |
| Event function byte: (1 << 4) | fw_swid Our |
| commands use HIDPP20_SW_ID (0x0A); firmware |
| events use a different sw_id (typically 0). |
\*-----------------------------------------------------*/
if(feat == caps.idx_rgb_effects &&
(func & 0xF0) == 0x10 &&
(func & 0x0F) != HIDPP20_SW_ID)
{
OnUserActivity(data[0]);
}
}
void LogitechHIDPP20Controller::OnUserActivity(uint8_t activity_type)
{
/*-----------------------------------------------------*\
| power_mutex must already be held by the caller. |
\*-----------------------------------------------------*/
if(activity_type == 0)
{
/*-------------------------------------------------*\
| IDLE event: firmware detected inactivity. |
| Only act if we're currently ACTIVE. Firmware |
| sends a burst of ~8 events; ignore repeats. |
\*-------------------------------------------------*/
if(power_state != HIDPP20_POWER_ACTIVE)
{
return;
}
if(!ps_dim_enabled && !ps_sleep_enabled)
{
return;
}
LOG_DEBUG("%s onUserActivity: IDLE: starting dim", LOG_TAG);
/*-------------------------------------------------*\
| Flush stale per-key ACKs before sending commands |
\*-------------------------------------------------*/
FlushResponseQueue();
/*-------------------------------------------------*\
| flags=3 (EFFECT|POWER): keep effect control |
| and monitor for user activity. TODO: Solaar |
| uses 0x02 idle / 0x04 active and still gets |
| onUserActivity, our EFFECT bit may be |
| unneeded. Test on hardware before changing. |
\*-------------------------------------------------*/
SetSWControl(3, 3);
if(!ps_dim_enabled)
{
power_state = HIDPP20_POWER_IDLE;
uint16_t sleep_delay = (sleep_timeout_s > idle_timeout_s)
? (sleep_timeout_s - idle_timeout_s) : 0;
sleep_deadline = std::chrono::steady_clock::now()
+ std::chrono::seconds(sleep_delay);
LOG_DEBUG("%s Dim disabled, skipping to IDLE (sleep in %us)",
LOG_TAG, sleep_delay);
}
else
{
StartDimRamp();
}
}
else
{
/*-------------------------------------------------*\
| ACTIVE event: user resumed typing. |
| Only act if we're NOT already active. |
\*-------------------------------------------------*/
if(power_state == HIDPP20_POWER_ACTIVE)
{
return;
}
LOG_DEBUG("%s onUserActivity: ACTIVE: waking", LOG_TAG);
Wake();
}
}
void LogitechHIDPP20Controller::StartDimRamp()
{
/*-----------------------------------------------------*\
| Start the brightness ramp from 100% to |
| DIM_TARGET_PCT. The actual dimming happens in |
| DeviceUpdateLEDs; it reads dim_brightness_pct |
| and scales the color buffer output. This is |
| our own host-side animation, independent of |
| the firmware's sleep-ramp timer. |
\*-----------------------------------------------------*/
dim_step = 0;
next_dim_time = std::chrono::steady_clock::now();
power_state = HIDPP20_POWER_DIMMING;
LOG_DEBUG("%s Dim ramp started (100%% -> %d%%)", LOG_TAG, ps_dim_target_pct);
}
void LogitechHIDPP20Controller::DimRampStep()
{
/*-----------------------------------------------------*\
| power_mutex must already be held by the caller. |
| Adjusts brightness and requests a repaint so |
| DeviceUpdateLEDs pushes the dimmed colors. |
\*-----------------------------------------------------*/
if(power_state != HIDPP20_POWER_DIMMING)
{
return;
}
dim_step++;
int target = ps_dim_target_pct;
int brightness = 100 - ((100 - target) * dim_step / DIM_STEPS);
if(brightness < target)
{
brightness = target;
}
dim_brightness_pct.store(brightness);
/*-----------------------------------------------------*\
| Request repaint so DeviceUpdateLEDs applies |
| the new brightness. For animations this is |
| redundant (the animation loop already calls |
| it), but for static colors this is the only |
| way to push the dimmed output. |
| |
| Do NOT bump init_generation here; that would clear |
| sent_colors and make the next DeviceUpdateLEDs treat |
| the frame as a first-push, firing the |
| SetZoneEffect(0xFF, static black, persist=true) prep |
| call. On mice that flash as a brief black-out per dim |
| step. Delta tracking already handles the changed |
| brightness correctly: snapshot is the scaled output, |
| sent_colors holds the previously scaled frame, and |
| the diff catches every pixel that moved. |
\*-----------------------------------------------------*/
if(request_repaint_fn)
{
request_repaint_fn();
}
/*-----------------------------------------------------*\
| Check if dim ramp is complete |
\*-----------------------------------------------------*/
if(dim_step >= DIM_STEPS)
{
power_state = HIDPP20_POWER_IDLE;
/*-------------------------------------------------*\
| Pull the sleep deadline forward by the |
| firmware's off-ramp duration so the |
| firmware fade *ends* at the user-configured |
| sleep_timeout_s. Without this we'd be late |
| by nv_sleep_ramp_seconds (30s on G515). |
\*-------------------------------------------------*/
uint16_t effective_sleep = sleep_timeout_s;
if(caps.nv_sleep_ramp_known && caps.nv_sleep_ramp_enabled
&& caps.nv_sleep_ramp_seconds < sleep_timeout_s)
{
effective_sleep -= caps.nv_sleep_ramp_seconds;
}
uint16_t sleep_delay = (effective_sleep > idle_timeout_s)
? (effective_sleep - idle_timeout_s) : 0;
sleep_deadline = std::chrono::steady_clock::now()
+ std::chrono::seconds(sleep_delay);
LOG_DEBUG("%s Dim complete, IDLE (sleep in %us, effective_sleep=%us)",
LOG_TAG, sleep_delay, effective_sleep);
}
}
void LogitechHIDPP20Controller::StartSleep()
{
/*-----------------------------------------------------*\
| SetRgbPowerMode(3) = firmware-managed fade to |
| off. The firmware handles the fade internally. |
| |
| Set power_state BEFORE sending the command so that |
| DeviceUpdateLEDs sees SLEEPING and stops pushing |
| frames before the sleep command hits the wire. |
| Suppression is the safe default: a write arriving |
| after SetRgbPowerMode (3) can otherwise wake the |
| device and cancel the sleep. Devices carrying |
| FADE_ACCEPTS_WRITES opt out of suppression, their |
| firmware tolerates writes during the fade. |
\*-----------------------------------------------------*/
LOG_DEBUG("%s Entering sleep (SetRgbPowerMode 3)", LOG_TAG);
power_state = HIDPP20_POWER_SLEEPING;
uint8_t data[3] = { 0x01, 0x03, 0x00 };
blankFAPmessage response;
int result = SendAckedIntoFAP(caps.idx_rgb_effects, caps.fn_pwr_mode,
data, 3, response);
if(result <= 0)
{
LOG_DEBUG("%s SetRgbPowerMode(3) failed after retries (result=%d), "
"reverting to IDLE", LOG_TAG, result);
power_state = HIDPP20_POWER_IDLE;
}
}
void LogitechHIDPP20Controller::Wake()
{
/*-----------------------------------------------------*\
| Called from OnUserActivity(1) when the firmware |
| reports user input. Works for DIMMING, IDLE and |
| SLEEPING uniformly; the only wrinkle is that |
| SLEEPING means we previously sent |
| SetRgbPowerMode(3) to start the fade, so we must |
| cancel it with SetRgbPowerMode(1) first. |
| |
| Per the 0x8071 lifecycle a proper wake is power |
| mode 1 (if we were sleeping), then |
| SetSWControl(3,5) to re-claim rendering from the |
| firmware's idle-monitor mode, then re-push the |
| current lighting state at full brightness. |
| |
| The re-push uses request_repaint_fn |
| (DeviceUpdateLEDs) NOT reapply_active_mode_fn, |
| which re-runs the full claim and per-key prep. |
| Wake is NOT a reconnect: the device handle, |
| feature map, SW control claim and per-key prep |
| are all still intact. Re-running the claim would |
| briefly reset the zone effect layer and flash the |
| firmware default colors for ~50ms before per-key |
| takes back over. |
| |
| power_mutex must already be held by the caller. |
\*-----------------------------------------------------*/
HIDPP20PowerState prev = power_state;
FlushResponseQueue();
if(prev == HIDPP20_POWER_SLEEPING)
{
/*-------------------------------------------------*\
| Cancel the firmware's fade-to-off. SW |
| control is still ours; this is not a |
| reconnect. The device stays on the same |
| hidraw handle, same feature map, same claim. |
\*-------------------------------------------------*/
SetRGBPowerMode(1);
}
SetSWControl(3, 5);
dim_brightness_pct.store(100);
deep_sleep.store(false);
consecutive_frame_end_failures.store(0);
power_state = HIDPP20_POWER_ACTIVE;
LOG_DEBUG("%s Woke from state %d", LOG_TAG, prev);
/*-----------------------------------------------------*\
| Re-push the current lighting state at full |
| brightness. |
| |
| We use request_repaint_fn (lightweight: just calls |
| DeviceUpdateLEDs) NOT reapply_active_mode_fn |
| (heavyweight: reruns ClaimSWControlIfNeeded -> |
| SetOnboardMode -> per-key prep sequence -> |
| DeviceUpdateMode). On wake-from-dim/idle the device |
| is still in host mode, SW control is still claimed, |
| and the per-key prep has already been established so |
| all we need is a fresh paint at restored brightness. |
| |
| The brightness was restored to 100% above |
| (dim_brightness_pct.store(100)), so DeviceUpdateLEDs |
| will apply the full-brightness multiplier to the |
| snapshot. Since sent_colors was recorded at the |
| previous (dimmed) brightness, the delta detects a |
| change on every zone and pushes a full frame |
| naturally, no sent_colors.clear() needed. |
| |
| ReapplyActiveMode (the heavyweight path) is |
| reserved for reconnects where the device was |
| fully re-enumerated and needs the complete |
| claim + prep + mode re-establishment. |
\*-----------------------------------------------------*/
wake_full_repaint_pending_.store(true);
if(request_repaint_fn)
{
request_repaint_fn();
}
}
bool LogitechHIDPP20Controller::ConsumeWakeFullRepaint()
{
return wake_full_repaint_pending_.exchange(false);
}
void LogitechHIDPP20Controller::ReadFirmwareTimers()
{
if(caps.idx_rgb_effects == 0 || !caps.has_power_mgmt)
{
return;
}
/*-----------------------------------------------------*\
| GetRgbPowerModeConfig (fn7, sub-function 0x00 = get) |
| Response: [echo], idle_hi/lo, sleep_hi/lo |
\*-----------------------------------------------------*/
uint8_t send_data[1] = { 0x00 };
uint8_t recv_data[16] = {};
int result = SendAndReceive(caps.idx_rgb_effects, caps.fn_pwr_config,
send_data, 1, recv_data, sizeof(recv_data));
if(result > 0)
{
uint16_t idle = ((uint16_t)recv_data[3] << 8) | recv_data[4];
uint16_t sleep = ((uint16_t)recv_data[5] << 8) | recv_data[6];
if(idle > 0)
{
idle_timeout_s = idle;
fw_idle_timeout_s = idle;
}
if(sleep > 0)
{
sleep_timeout_s = sleep;
fw_sleep_timeout_s = sleep;
}
written_idle_s = idle;
written_sleep_s = sleep;
LOG_TRACE("%s Firmware timers: idle=%us sleep=%us", LOG_TAG, idle_timeout_s, sleep_timeout_s);
}
else
{
written_idle_s = idle_timeout_s;
written_sleep_s = sleep_timeout_s;
LOG_DEBUG("%s Failed to read firmware timers, using defaults (idle=%us sleep=%us)",
LOG_TAG, idle_timeout_s, sleep_timeout_s);
}
}
void LogitechHIDPP20Controller::ReadNvSleepRampConfig()
{
/*----------------------------------------------------------*\
| RGBEffects fn3 NV_CONFIG (0x30) read of capability 0x0020 |
| (Off Ramp / Sleep Transition). |
| |
| Wire format (matches observed wire capture): |
| request: short msg, data = [0x00, cap_hi, cap_lo] |
| where 0x00 = sub-function GET |
| response: long msg, data = [echo (3 bytes), enabled, |
| ramp_seconds, ...] |
| |
| G515 default observed from vendor app: enabled=0x01, |
| seconds=0x1E (= 30 seconds dim ramp before sleep). |
\*----------------------------------------------------------*/
if(caps.idx_rgb_effects == 0 || !caps.has_power_mgmt)
{
return;
}
uint8_t send_data[3] = { 0x00, 0x00, 0x20 };
uint8_t recv_data[16] = {};
int result = SendAndReceive(caps.idx_rgb_effects, FN_8071_NV_CONFIG,
send_data, sizeof(send_data),
recv_data, sizeof(recv_data));
if(result <= 0)
{
LOG_DEBUG("%s NvConfig 0x0020 read failed (result=%d)", LOG_TAG, result);
return;
}
if(recv_data[0] != 0x00 || recv_data[1] != 0x00 || recv_data[2] != 0x20)
{
LOG_DEBUG("%s NvConfig 0x0020 read: unexpected echo %02X %02X %02X",
LOG_TAG, recv_data[0], recv_data[1], recv_data[2]);
return;
}
caps.nv_sleep_ramp_enabled = (recv_data[3] != 0);
caps.nv_sleep_ramp_seconds = recv_data[4];
caps.nv_sleep_ramp_known = true;
LOG_DEBUG("%s NvConfig 0x0020 (sleep ramp): enabled=%d ramp=%us "
"raw=[%02X %02X %02X %02X %02X %02X %02X %02X]",
LOG_TAG,
(int)caps.nv_sleep_ramp_enabled,
(unsigned)caps.nv_sleep_ramp_seconds,
recv_data[3], recv_data[4], recv_data[5], recv_data[6],
recv_data[7], recv_data[8], recv_data[9], recv_data[10]);
}
void LogitechHIDPP20Controller::WritePowerConfig(uint16_t idle_s, uint16_t sleep_s)
{
/*-----------------------------------------------------*\
| SetRgbPowerModeConfig (fn7, sub-function 0x01 = set) |
| Wire format (long message, 16 bytes payload, matches |
| the GET response layout at the same offsets): [0x01, |
| 0x00, 0x00, idle_hi, idle_lo, sleep_hi, sleep_lo, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00] |
| |
| These are the firmware's *runtime* power timers, |
| the values reset on power cycle but persist |
| across SW control release/reclaim, so we need to |
| write them ourselves on every claim to be safe. |
\*-----------------------------------------------------*/
if(caps.idx_rgb_effects == 0 || !caps.has_power_mgmt)
{
return;
}
uint8_t data[16] = {};
data[0] = 0x01; // sub-function: SET
data[3] = (uint8_t)((idle_s >> 8) & 0xFF);
data[4] = (uint8_t)( idle_s & 0xFF);
data[5] = (uint8_t)((sleep_s >> 8) & 0xFF);
data[6] = (uint8_t)( sleep_s & 0xFF);
blankFAPmessage response;
SendAckedIntoFAP(caps.idx_rgb_effects, caps.fn_pwr_config,
data, sizeof(data), response);
LOG_DEBUG("%s WritePowerConfig: idle=%us sleep=%us", LOG_TAG, idle_s, sleep_s);
}
void LogitechHIDPP20Controller::ReadActiveProfileSector()
{
/*----------------------------------------------------------*\
| Diagnostic-only read of the active profile sector via |
| ProfileManagement (0x8101) load + paged readBuffer. |
| |
| This sector is the canonical storage for persisted device |
| state on G-series devices: idle/sleep timers, baseline |
| RGB effect, FKC enable, and more. The HID++ feature |
| endpoints (0x8071, 0x8081, 0x1B05, ...) are mostly status |
| hooks; the configuration database lives here. We don't |
| act on the contents, just log them so we can see what |
| the device thinks its persisted state is. |
| |
| Wire format mirrors observed wire capture (load followed |
| by 7x readBuffer): |
| load: long msg, [partition=0x01, sector=0x01, |
| size_hi=0x00, size_lo=0x63, |
| padding to 16 bytes] |
| readBuffer: short msg, [offset_hi, offset_lo, 0] |
| returns long msg with 16 bytes of data |
| |
| Sector size 0x63 = 99 bytes is what the vendor app |
| requested for the G515 active profile. Other devices may |
| differ; it is hardcoded because this path is diagnostic. |
\*----------------------------------------------------------*/
if(caps.idx_profile_management == 0)
{
return;
}
constexpr uint16_t SECTOR_SIZE = 0x63; // 99 bytes
constexpr uint16_t PAGE_SIZE = 16;
/*-----------------------------------------------------*\
| Step 1: load the sector into the device's read buffer |
\*-----------------------------------------------------*/
uint8_t load_data[16] = {};
load_data[0] = 0x01; // partition: NVS/flash
load_data[1] = 0x01; // sector: active profile
load_data[2] = (uint8_t)((SECTOR_SIZE >> 8) & 0xFF); // size hi
load_data[3] = (uint8_t)( SECTOR_SIZE & 0xFF); // size lo
blankFAPmessage load_resp;
int load_result = SendAckedIntoFAP(caps.idx_profile_management, FN_8101_LOAD,
load_data, sizeof(load_data), load_resp);
if(load_result <= 0)
{
LOG_DEBUG("%s ProfileSector load failed (result=%d)", LOG_TAG, load_result);
return;
}
/*-----------------------------------------------------*\
| Step 2: page the sector out 16 bytes at a time |
\*-----------------------------------------------------*/
uint8_t sector_buf[SECTOR_SIZE] = {};
for(uint16_t offset = 0; offset < SECTOR_SIZE; offset += PAGE_SIZE)
{
uint8_t read_req[3] = {
(uint8_t)((offset >> 8) & 0xFF),
(uint8_t)( offset & 0xFF),
0x00
};
uint8_t page_resp[20] = {};
int result = SendAndReceive(caps.idx_profile_management, FN_8101_READBUFFER,
read_req, sizeof(read_req),
page_resp, sizeof(page_resp));
if(result <= 0)
{
LOG_DEBUG("%s ProfileSector readBuffer offset=0x%04X failed (result=%d)",
LOG_TAG, (unsigned)offset, result);
return;
}
size_t copy_len = (offset + PAGE_SIZE > SECTOR_SIZE)
? (size_t)(SECTOR_SIZE - offset)
: PAGE_SIZE;
memcpy(sector_buf + offset, page_resp, copy_len);
}
/*-----------------------------------------------------*\
| Step 3: log as a hexdump, one row per 16 bytes |
\*-----------------------------------------------------*/
LOG_DEBUG("%s ProfileSector partition=NVS sector=1 size=%u bytes:",
LOG_TAG, (unsigned)SECTOR_SIZE);
for(uint16_t row = 0; row < SECTOR_SIZE; row += PAGE_SIZE)
{
size_t row_len = (row + PAGE_SIZE > SECTOR_SIZE)
? (size_t)(SECTOR_SIZE - row)
: PAGE_SIZE;
char hex[64] = {};
char* p = hex;
for(size_t i = 0; i < row_len; i++)
{
snprintf(p, 4, "%02X ", sector_buf[row + i]);
p += 3;
}
LOG_DEBUG("%s %04X: %s", LOG_TAG, (unsigned)row, hex);
}
}
Reference in new issue View Git Blame Copy Permalink