The admin host check compared r.Host against the allowed URL's Host
with byte-for-byte equality. url.Parse does not normalize host case,
so an allowed 'http://Example.com:2019' rejected a client Host of
'example.com:2019' with 'host not allowed', and the same happened for
an uppercase variant of a lowercase entry like localhost.
The Origin check got this treatment in 7973 already, the DNS rebinding
Host check right next to it did not. Both read the same allowedOrigins
list, so this applies the same strings.EqualFold treatment there.
Regression test covers both fold directions, the default localhost
entry and the negative case that must keep failing
The admin origin allow-list compared origin.Host against the allowed
URL's Host with byte-for-byte equality. url.Parse does not normalize
host case, so an allowed 'http://Example.com:8080' rejected a client
origin of 'http://example.com:8080' even though RFC 3986 §3.2.2 says
host names are case-insensitive. Use strings.EqualFold.
Signed-off-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* admin: normalize request path in remote admin access-control check
Co-authored-by: atlarix-agent <agent@atlarix.dev>
* admin: fix empty allowedPath regression and dead code in path normalization
path.Clean("") returns ".", so cleaning allowedPath unconditionally
silently broke the allow-all behavior when Paths: [""] is configured.
Short-circuit the empty case before cleaning to preserve that behavior.
Also remove the dead strings.HasSuffix(allowedPath, "/") branch —
after path.Clean the path never has a trailing slash, so the unified
reqPath == allowedPath || HasPrefix(reqPath, allowedPath+"/") form
covers exact match, subpath boundary, and trailing-slash requests.
Co-authored-by: atlarix-agent <agent@atlarix.dev>
Co-authored-by: iabdullah215 <muhammadabdullah8040@gmail.com>
* admin: validate non-canonical configured paths at provisioning
path.Clean(allowedPath) silently broadens misconfigured values like
// or /.. into /, which grants unintended access to all endpoints.
Reject non-canonical paths during provisioning in
replaceRemoteAdminServer so misconfigurations fail fast with a
clear error. The path.Clean in adminPathAllowed remains as
defense-in-depth but is now a safe no-op on validated inputs.
Co-authored-by: atlarix-agent <agent@atlarix.dev>
* admin: validate non-canonical configured paths at provisioning
path.Clean(allowedPath) silently broadens misconfigured values like
// or /.. into /, which grants unintended access to all endpoints.
Reject non-canonical paths during provisioning in
replaceRemoteAdminServer so misconfigurations fail fast with a
clear error. The path.Clean in adminPathAllowed remains as
defense-in-depth but is now a safe no-op on validated inputs.
Co-authored-by: atlarix-agent <agent@atlarix.dev>
* admin: fix TrimRight → TrimSuffix in provisioning path validation
strings.TrimRight strips all trailing slashes, so a configured path
like /foo// passed validation (both slashes trimmed to /foo matching
path.Clean output) but was silently broadened to /foo at runtime.
Use strings.TrimSuffix instead, which removes exactly one trailing
slash — the only form the exemption was meant to allow (users write
/pki/ca/prod/ meaning the /pki/ca/prod scope).
Also update the // test case: with TrimSuffix, // is just / + one
trailing slash, which is valid under the exemption. Add a new test
for /foo// (double trailing slashes → wantErr: true).
Co-authored-by: atlarix-agent <agent@atlarix.dev>
* admin: reject non-canonical root permission path
* admin: preserve trailing-slash permission semantics
---------
Co-authored-by: atlarix-agent <agent@atlarix.dev>
Co-authored-by: iabdullah215 <muhammadabdullah8040@gmail.com>
Co-authored-by: Zen Dodd <mail@steadytao.com>
* metrics: Add nil check for metricsHandler in AdminMetrics.serveHTTP
Prevents panic when the admin metrics endpoint is accessed before
the module is fully provisioned. Returns a proper API error instead
of crashing.
* admin: provision router modules before registering routes
Instead of adding a nil check for metricsHandler, address the root
cause by provisioning admin router modules before calling Routes().
This ensures all handler state is initialized before routes are
registered on the mux.
Merge newAdminHandler and provisionAdminRouters into a single step,
removing the two-phase setup where routes were registered first and
modules provisioned later. The AdminConfig.routers field is no longer
needed since provisioning happens inline.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* fix: go fmt admin.go
---------
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* admin: Redact sensitive request headers in API logs
* Fix govulncheck and typed atomic lint failures
* Sync Go module metadata after dependency downgrade
* admin: Fix tests locally, properly isolate storage
* Fix flaky pki_test
* Drop testdata dir logic
* Safer temp dir
* Test handlers without a full server
* admin: Make sure that any admin routers are provisioned when local/remote admin servers are replaced at runtime.
* admin: check for provisioning errors during admin server replacements
The consensus is that host enforcement on unix sockets is ineffective, frustrating, and confusing. (Unix sockets have their own OS-level permissions system.)
* Add per host config
* Pass host label when option is enabled
* Test per host enabled
* metrics: scope metrics per loaded config
* doc and linter
Signed-off-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* inject the custom registry into the admin handler
Co-Authored-By: Dave Henderson <dhenderson@gmail.com>
* remove `TODO` comment
* fixes
Signed-off-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* refactor to delay metrics admin handler provision
Signed-off-by: Mohammed Al Sahaf <msaa1990@gmail.com>
---------
Signed-off-by: Mohammed Al Sahaf <msaa1990@gmail.com>
Co-authored-by: Hussam Almarzooq <me@hussam.io>
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* caddy adapt for listen_protocols
* adapt listen_socket
* allow multiple listen sockets for port ranges and readd socket fd listen logic
* readd logic to start servers according to listener protocols
* gofmt
* adapt caddytest
* gosec
* fmt and rename listen to listenWithSocket
* fmt and rename listen to listenWithSocket
* more consistent error msg
* non unix listenReusableWithSocketFile
* remove unused func
* doc comment typo
* nonosec
* commit
* doc comments
* more doc comments
* comment was misleading, cardinality did not change
* addressesWithProtocols
* update test
* fd/ and fdgram/
* rm addr
* actually write...
* i guess we doin' "skip": now
* wrong var in placeholder
* wrong var in placeholder II
* update param name in comment
* dont save nil file pointers
* windows
* key -> parsedKey
* osx
* multiple default_bind with protocols
* check for h1 and h2 listener netw
* Making eTags a header not a trailer
* Checked the write
* Fixed typo
* Corrected comment
* Added sync Pool
* Changed control flow of buffer reset / putting and changed error code
* Switched from interface{} to any in bufferPool
certmagic.New takes a template and returns pointer to the new config.
GetConfigForCert later must return a pointer to the new config not the
template.
fixes#5162
* core: Refactor, improve listener logic
Deprecate:
- caddy.Listen
- caddy.ListenTimeout
- caddy.ListenPacket
Prefer caddy.NetworkAddress.Listen() instead.
Change:
- caddy.ListenQUIC (hopefully to remove later)
- caddy.ListenerFunc signature (add context and ListenConfig)
- Don't emit Alt-Svc header advertising h3 over HTTP/3
- Use quic.ListenEarly instead of quic.ListenEarlyAddr; this gives us
more flexibility (e.g. possibility of HTTP/3 over UDS) but also
introduces a new issue:
https://github.com/lucas-clemente/quic-go/issues/3560#issuecomment-1258959608
- Unlink unix socket before and after use
* Appease the linter
* Keep ListenAll
Includes several breaking changes; code base updated accordingly.
- Added lots of context arguments
- Use fs.ErrNotExist
- Rename ACMEManager -> ACMEIssuer; CertificateManager -> Manager
* admin: Implement /pki/certificates/<id> API
* pki: Lower "skip_install_trust" log level to INFO
See https://github.com/caddyserver/caddy/issues/4058#issuecomment-976132935
It's not necessary to warn about this, because this was an option explicitly configured by the user. Still useful to log, but we don't need to be so loud about it.
* cmd: Export functions needed for PKI app, return API response to caller
* pki: Rewrite `caddy trust` command to use new admin endpoint instead
* pki: Rewrite `caddy untrust` command to support using admin endpoint
* Refactor cmd and pki packages for determining admin API endpoint
