logging: compile out LOG_TRACE by default, demote chatty DEBUG lines, drop redundant logs (#11391)

* logging: gate LOG_TRACE behind MESHTASTIC_TRACE_LOGGING, drop redundant reclock logs

LOG_TRACE now compiles out by default so trace-level diagnostics cost no
flash; enable with -DMESHTASTIC_TRACE_LOGGING. Portduino keeps it on for
the traceFilename packet-trace feature.

Remove the 66 caller-side I2C reclock/restore log lines in the telemetry
sensors: ReClockI2C::setClock/restoreClock already log both frequencies
internally (now at trace level, since they fire every sensor read).

Also unify near-duplicate literals (colon/case/punctuation variants) so
linker string dedup applies, and drop an information-free bare 'done'.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: demote chatty per-packet/per-poll DEBUG lines to trace level

With LOG_TRACE compiled out by default, per-iteration chatter (packet
bookkeeping, sensor poll values, e-ink refresh reasons, GPS pin states,
UI runState traces) now costs no flash on device builds while remaining
one -DMESHTASTIC_TRACE_LOGGING away. 108 lines demoted, 4 information-
free lines removed; failure paths, drop reasons, and one-time init logs
all stay at debug level.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: address CodeRabbit review on trace-gate PR

- GPS: pass serial-derived buffers as %s args, never as format strings
  (untrusted bytes could contain % directives)
- 0x%08x for packet id / NodeNum per convention (Router, CannedMessage,
  NeighborInfo); unsigned casts for size_t args; %u for uint32_t delta
- EInk: async full-refresh begin/complete back to DEBUG (rare state
  transitions); per-frame SKIPPED lines stay trace

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: gate trace on the flag's value, not its presence

-DMESHTASTIC_TRACE_LOGGING=0 previously *enabled* trace logging because
the gate tested definedness. The flag now defaults per-platform
(portduino 1, else 0) and both backends test the value, so =0 disables,
=1 or a bare -D enables. Also cast tx_after-millis() to uint32_t for %u
(millis() is unsigned long on native).

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: clang-format rewrap after specifier widening

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* Even fewer bytes!

* logging: keep compile-gated debug lines at debug level; fix native-suite-count

Lines already inside default-off #ifdef blocks (GPS_DEBUG,
DEBUG_LOOP_TIMING) cost no flash and should stay visible at debug level
when their gate is enabled, rather than also requiring
MESHTASTIC_TRACE_LOGGING.

test/native-suite-count lags the two test_event_channel_* suites added
by #11045 (develop's Native Suite Count check has the same mismatch);
bump 46 -> 47.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* gps: route GPS_DEBUG diagnostics through a LOG_DEBUG_GPS() macro (#11414)

Replaces 27 log-only #ifdef GPS_DEBUG blocks across GPS.cpp,
PositionModule, MeshService, and GPSStatus.h with a single-line
LOG_DEBUG_GPS() call (src/gps/GPSLog.h, modeled on LOG_MIGRATION:
value-gated, ((void)0) when off). Blocks containing declarations,
control flow, hexDump, or nested conditionals keep an explicit
'#if GPS_DEBUG' guard. RTC.cpp's per-reading raw time dumps and
per-candidate rejection chatter fold under the same gate; quality
transitions and boot-time seeding stay at debug.

Also fixes the '// define GPS_DEBUG' missing-# typo in two variant
headers and updates all seven commented examples to the value form
('#define GPS_DEBUG 1') required by the value-based gate.


Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

Co-authored-by: Claude <noreply@anthropic.com>

* gps: declare RTC gmtime result as pointer to const (cppcheck)

With the setTime debug dump gated behind GPS_DEBUG, all remaining uses
of t are reads; cppcheck (constVariablePointer) now flags it.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

---------

Co-authored-by: Claude <noreply@anthropic.com>

src/modules/AdminModule.cpp

@@ -151,7 +151,7 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
             LOG_INFO("Ignore admin response from 0x%08x, no outstanding request", mp.from);
             return handled;
         }
-        LOG_DEBUG("Allow admin response message");
+        LOG_TRACE("Allow admin response message");
     } else if (mp.from == 0) {
         // Local admin from a BLE/USB/TCP client. from == 0 cannot arrive from the
         // mesh: RF drops packets without a sender (RadioLibInterface) and MQTT treats
@@ -2168,7 +2168,7 @@ bool AdminModule::messageIsRequest(const meshtastic_AdminMessage *r)
 
 void AdminModule::handleSendInputEvent(const meshtastic_AdminMessage_InputEvent &inputEvent)
 {
-    LOG_DEBUG("Processing input event: event_code=%u, kb_char=%u, touch_x=%u, touch_y=%u", inputEvent.event_code,
+    LOG_TRACE("Processing input event: event_code=%u, kb_char=%u, touch_x=%u, touch_y=%u", inputEvent.event_code,
               inputEvent.kb_char, inputEvent.touch_x, inputEvent.touch_y);
 
     // Create InputEvent for injection.