diff --git a/.github/pull_request_template.md b/.github/pull_request_template.md
index 0142c57a2..8f7670fa5 100644
--- a/.github/pull_request_template.md
+++ b/.github/pull_request_template.md
@@ -4,16 +4,16 @@
 
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
-  is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
+  is appreciated." This will allow other devs to potentially save you time by not accidentally duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the Linux version),
   because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
 - Please do not submit untested code.
-- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
+- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and community members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
 
 ## 🤝 Attestations
diff --git a/branding/README.md b/branding/README.md
index 3a558bf20..b59936140 100644
--- a/branding/README.md
+++ b/branding/README.md
@@ -12,6 +12,6 @@ Ex:
 - `logo_320x480.png`
 - `logo_320x240.png`
 
-This file is copied to `data/boot/logo.png` before filesytem image compilation.
+This file is copied to `data/boot/logo.png` before filesystem image compilation.
 
 For additional examples see the [`event/defcon33` branch](https://github.com/meshtastic/firmware/tree/event/defcon33).
diff --git a/src/graphics/niche/Drivers/EInk/README.md b/src/graphics/niche/Drivers/EInk/README.md
index eca91c6a8..33833f0cd 100644
--- a/src/graphics/niche/Drivers/EInk/README.md
+++ b/src/graphics/niche/Drivers/EInk/README.md
@@ -19,7 +19,7 @@ void setupNicheGraphics()
     SPIClass *hspi = new SPIClass(HSPI);
     hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS);
 
-    // Setup Enk driver
+    // Setup EInk driver
     Drivers::EInk *driver = new Drivers::DEPG0290BNS800;
     driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY);
 
diff --git a/src/graphics/niche/InkHUD/docs/README.md b/src/graphics/niche/InkHUD/docs/README.md
index 8c30aba58..7cd468d73 100644
--- a/src/graphics/niche/InkHUD/docs/README.md
+++ b/src/graphics/niche/InkHUD/docs/README.md
@@ -733,7 +733,7 @@ To add support for additional encodings, add to the `AppletFont::Encodings` enum
 
 #### Custom Line Height
 
-Some fonts may have a handful of especially tall characters, especially extended-ASCII fonts with diacritcs. Ideally, the font should be modified to help resolve this, but if the problem remains, manual offsets to the automatically determined line height can be specified in the constructor.
+Some fonts may have a handful of especially tall characters, especially extended-ASCII fonts with diacritics. Ideally, the font should be modified to help resolve this, but if the problem remains, manual offsets to the automatically determined line height can be specified in the constructor.
 
 ```cpp
 // -2 px of padding above, +1 px of padding below
diff --git a/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/readme.md b/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/readme.md
index 4ffe625cc..5d3d90c72 100644
--- a/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/readme.md
+++ b/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/readme.md
@@ -53,7 +53,7 @@ Making your own node based on this design is straightforward. There are various
 
 The E80 from CDEbyte is the most obtainable module at present, and has been selected as the default option.
 
-Naturally, CDEbyte have chosen to ignore the generic Semtech impelementation of the RF switching logic and have supplied confusing and contradictory documentation, which is explained below.
+Naturally, CDEbyte have chosen to ignore the generic Semtech implementation of the RF switching logic and have supplied confusing and contradictory documentation, which is explained below.
 
 tl;dr: The E80 is chosen as the default. **If you wish to use another module, the table in `rfswitch.h` must be adjusted accordingly.**
 
diff --git a/variants/nrf52840/diy/xiao_ble/README.md b/variants/nrf52840/diy/xiao_ble/README.md
index fe6dcba2d..efc1236a8 100644
--- a/variants/nrf52840/diy/xiao_ble/README.md
+++ b/variants/nrf52840/diy/xiao_ble/README.md
@@ -116,7 +116,7 @@ _(none)_
 1. Double press the XIAO nrf52840's `reset` button to put it in bootloader mode, and a USB volume named `XIAO SENSE` will appear
 2. Copy the `firmware.uf2` file to the `XIAO SENSE` volume (refer to the last step of [Build Meshtastic](#2-build-meshtastic))
 3. The XIAO nrf52840's red LED will flash for several seconds as the firmware is copied
-4. Once Meshtastic firmware succesfully boots, the:
+4. Once Meshtastic firmware successfully boots, the:
    1. Green LED will turn on
    2. Red LED will flash several times to indicate flash memory writes during initial settings file creation
    3. Green LED will blink every second once the firmware is running normally
@@ -135,7 +135,7 @@ _(none)_
   - If you don't see any specific error message, but the boot process is stuck or not proceeding as expected, this might also mean there is a conflict in `variant.h`. If you have made any changes to the pin mapping, ensure they do not result in a conflict. If all else fails, try reverting your changes and using the known-good configuration included here.
   - The above might also mean something is wired incorrectly. Try reverting to one of the known-good example wirings in section 4.
 - If the E22 gets hot to the touch:
-  - The power amplifier is likely running continually. Disconnect it and the XIAO from power immediately, and double check wiring and pin mapping. In my experimentation this occurred in cases where TXEN was inadvertenly high (usually due to a pin mapping conflict).
+  - The power amplifier is likely running continually. Disconnect it and the XIAO from power immediately, and double check wiring and pin mapping. In my experimentation this occurred in cases where TXEN was inadvertently high (usually due to a pin mapping conflict).
 
 ## 5. Notes