logging: audit log strings for terseness, reclaiming ~6.8 KB of string data (#11374)

* logging: strip redundant punctuation, level prefixes, and 'successfully' from log strings

The logger already appends a newline and prints the level tag, so
trailing '.', '!', '...', literal \n, and 'Error:'/'Warning:' prefixes
inside format strings are wasted flash bytes. Same for 'successfully'
(the affirmative form already implies it).

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: tighten verbose log strings in modules, radio, platform, and system code

Rewrite wordy log messages to terser equivalents - drop filler words
(articles, 'attempting', 'due to', 'please'), use 'Can't X'/'X failed'
phrasing, and abbreviate where the codebase already does (config, init,
msg, BT). Format specifiers and argument lists are unchanged; distinctive
greppable tokens are preserved.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: tighten verbose log strings in telemetry sensors and GPS

Same terseness pass: drop filler, 'Can't X'/'X failed' phrasing, common
abbreviations (temp, msg). Specifiers, arguments, and sensor-name
prefixes unchanged.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: tighten verbose log strings in mesh core

Same terseness pass over NodeDB, Router, MeshService, PhoneAPI,
RadioInterface, NextHopRouter, and PacketHistory: 'X failed'/'Can't X'
phrasing, imperative verbs, dropped filler. Specifiers and arguments
unchanged; duplicate literals kept identical to preserve linker string
dedup.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: 'Unable to/Could not/Cannot' -> "Can't" in log strings

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: clang-format rewrap after string shortening

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: restore boot-logo trailing newline and progress-dot strings

The terseness pass over-trimmed: the Meshtastic ASCII boot logo kept its
blank line via a trailing \n, and three bare "." progress ticks were
reduced to empty strings.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* Update src/mesh/wifi/WiFiAPClient.cpp

Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>

* logging: address review feedback on the terseness audit

- Node/packet IDs use the repo's 0x%08x convention in NextHopRouter,
  NodeDB, AdminModule and CannedMessageModule. The sibling log in each
  if/else pair is converted too, so a pair isn't split across two formats.
  next_hop stays 0x%x - it's the last-byte relay hint, not a NodeNum.
- RTC: the read-path and set-path "not found" warnings were byte-identical,
  so the linker deduped them and the log couldn't say which one fired.
  Split into "RTC read:" / "RTC set:". (The four sites live in mutually
  exclusive #ifdef branches, so the RTC family was never ambiguous.)
- SCD4X getAmbientPressure()/setAmbientPressure() logged "altitude", and
  SCD30 getASC() logged "Can't send command" for a read. Both now name the
  operation they actually perform.
- LOG_ERROR already carries the level: ". Error: %u" -> ", rc=%u" (matching
  the existing rc=%d house style) and "Error executing X()" -> "X() failed".
- Typos and wording: "OTA partiton.  (Reason" -> "OTA partition (reason",
  "CST3530 not response ~" -> "CST3530 no response", "Packet received with
  to: of 0" -> "to=0", HostMetrics "Error decoding" -> "Can't decode", and
  the dangling ": " on the NextHopRouter retransmission line.

Printf specifier sequences are byte-identical on all 37 touched lines apart
from the 6 deliberate %x/%u -> %08x node-ID widenings, all on uint32_t args.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

src/Power.cpp

@@ -171,7 +171,7 @@ static bool initAdcCalibration()
     }
 #endif
 
-    LOG_INFO("ADC calibration not supported; using approximate scaling");
+    LOG_INFO("ADC calibration unsupported; use approx scaling");
     return false;
 }
 
@@ -879,14 +879,14 @@ void Power::reboot()
     if (screen) {
         screen = nullptr;
     }
-    LOG_DEBUG("final reboot!");
+    LOG_DEBUG("final reboot");
     ::reboot();
 #elif defined(ARCH_STM32)
     HAL_NVIC_SystemReset();
 #else
     rebootAtMsec = -1;
-    LOG_WARN("FIXME implement reboot for this platform. Note that some settings "
-             "require a restart to be applied");
+    LOG_WARN("FIXME implement reboot for this platform; some settings "
+             "need restart to apply");
 #endif
 }
 
@@ -1926,7 +1926,7 @@ meshSolarBatteryLevel meshSolarLevel;
 bool Power::meshSolarInit()
 {
     bool result = meshSolarLevel.runOnce();
-    LOG_DEBUG("Power::meshSolarInit mesh solar sensor is %s", result ? "ready" : "not ready yet");
+    LOG_DEBUG("Power::meshSolarInit sensor is %s", result ? "ready" : "not ready yet");
     if (!result)
         return false;
     batteryLevel = &meshSolarLevel;
@@ -2059,7 +2059,7 @@ bool Power::serialBatteryInit()
 #endif
 
     bool result = serialBatteryLevel.runOnce();
-    LOG_DEBUG("Power::serialBatteryInit serial battery sensor is %s", result ? "ready" : "not ready yet");
+    LOG_DEBUG("Power::serialBatteryInit sensor is %s", result ? "ready" : "not ready yet");
     if (!result)
         return false;
     batteryLevel = &serialBatteryLevel;