From 334a4f04cdd236214d1cd6cceb75a2c6b5a4bfd4 Mon Sep 17 00:00:00 2001 From: "Justin E. Mann" Date: Thu, 29 Jan 2026 05:29:15 -0700 Subject: [PATCH 01/14] Fix logic for rak12035 sensor default config and improve messaging (#9414) * better logic to check if the RAK12035 soil sensor is calibrated, better log messaging if either of the default values were used. * . * changes to how default calibration is done and a message it the default calibration is used pointing to the actual calibration sketch so the user can find it and use it to improve accuracy. --------- Co-authored-by: Ben Meadors --- .../Telemetry/Sensor/RAK12035Sensor.cpp | 42 +++++++++++-------- 1 file changed, 24 insertions(+), 18 deletions(-) diff --git a/src/modules/Telemetry/Sensor/RAK12035Sensor.cpp b/src/modules/Telemetry/Sensor/RAK12035Sensor.cpp index 626cc0e87..4f3150b25 100644 --- a/src/modules/Telemetry/Sensor/RAK12035Sensor.cpp +++ b/src/modules/Telemetry/Sensor/RAK12035Sensor.cpp @@ -26,7 +26,7 @@ bool RAK12035Sensor::initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev) sensor.get_sensor_version(&data); if (data != 0) { LOG_INFO("Init sensor: %s", sensorName); - LOG_INFO("RAK12035Sensor Init Succeed \nSensor1 Firmware version: %i, Sensor Name: %s", data, sensorName); + LOG_INFO("RAK12035Sensor Init Succeed \nSensor Firmware version: %i, Sensor Name: %s", data, sensorName); status = true; sensor.sensor_sleep(); RESTORE_3V3_POWER(); @@ -49,33 +49,39 @@ void RAK12035Sensor::setup() // TODO:: Check for and run calibration check for up to 2 additional sensors if present. uint16_t zero_val = 0; uint16_t hundred_val = 0; - uint16_t default_zero_val = 550; - uint16_t default_hundred_val = 420; + const uint16_t default_zero_val = 510; + const uint16_t default_hundred_val = 390; + sensor.sensor_on(); + sensor.begin(); delay(200); sensor.get_dry_cal(&zero_val); + delay(200); sensor.get_wet_cal(&hundred_val); delay(200); - if (zero_val == 0 || zero_val <= hundred_val) { - LOG_INFO("Dry calibration value is %d", zero_val); - LOG_INFO("Wet calibration value is %d", hundred_val); - LOG_INFO("This does not make sense. You can recalibrate this sensor using the calibration sketch included here: " - "https://github.com/RAKWireless/RAK12035_SoilMoisture."); - LOG_INFO("For now, setting default calibration value for Dry Calibration: %d", default_zero_val); + + bool calibrationReset = false; + + if (zero_val == 0) { + LOG_INFO("Dry calibration not set, using default: %d", default_zero_val); sensor.set_dry_cal(default_zero_val); - sensor.get_dry_cal(&zero_val); - LOG_INFO("Dry calibration reset complete. New value is %d", zero_val); + delay(200); + zero_val = default_zero_val; + calibrationReset = true; } if (hundred_val == 0 || hundred_val >= zero_val) { - LOG_INFO("Dry calibration value is %d", zero_val); - LOG_INFO("Wet calibration value is %d", hundred_val); - LOG_INFO("This does not make sense. You can recalibrate this sensor using the calibration sketch included here: " - "https://github.com/RAKWireless/RAK12035_SoilMoisture."); - LOG_INFO("For now, setting default calibration value for Wet Calibration: %d", default_hundred_val); + LOG_INFO("Wet calibration not set, using default: %d", default_hundred_val); sensor.set_wet_cal(default_hundred_val); - sensor.get_wet_cal(&hundred_val); - LOG_INFO("Wet calibration reset complete. New value is %d", hundred_val); + delay(200); + hundred_val = default_hundred_val; + calibrationReset = true; } + if (calibrationReset) { + LOG_INFO("Default calibration values applied. Consider running the calibration sketch for better accuracy: " + "https://github.com/RAKWireless/RAK12035_SoilMoisture"); + } + + LOG_INFO("Dry calibration value: %d, Wet calibration value: %d", zero_val, hundred_val); sensor.sensor_sleep(); RESTORE_3V3_POWER(); delay(200); From 31bf51b3f2c72627d67499b2d8b942cbe8372da2 Mon Sep 17 00:00:00 2001 From: treysis Date: Thu, 29 Jan 2026 13:38:49 +0100 Subject: [PATCH 02/14] Add support for the hardware buttons on Bluetooth Nugget device (#9468) Co-authored-by: Ben Meadors --- variants/esp32s3/nugget_s3_lora/variant.h | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/variants/esp32s3/nugget_s3_lora/variant.h b/variants/esp32s3/nugget_s3_lora/variant.h index 8e6057d5b..1354d0837 100644 --- a/variants/esp32s3/nugget_s3_lora/variant.h +++ b/variants/esp32s3/nugget_s3_lora/variant.h @@ -12,7 +12,7 @@ #define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use // Button A (44), B (43), R (12), U (13), L (11), D (18) -#define BUTTON_PIN 44 // If defined, this will be used for user button presses +#define BUTTON_PIN 43 // If defined, this will be used for user button presses #define BUTTON_NEED_PULLUP #define USE_RF95 @@ -20,8 +20,19 @@ #define LORA_MISO 7 #define LORA_MOSI 8 #define LORA_CS 9 -#define LORA_DIO0 16 // a No connect on the SX1262 module +#define LORA_DIO0 16 #define LORA_RESET 4 #define LORA_DIO1 RADIOLIB_NC -#define LORA_DIO2 RADIOLIB_NC \ No newline at end of file +#define LORA_DIO2 RADIOLIB_NC + +// jk, its not really a trackball but we're gonna pretend! +#define HAS_TRACKBALL 1 +#define TB_UP 13 +#define TB_DOWN 18 +#define TB_LEFT 11 +#define TB_RIGHT 12 +#define TB_PRESS 44 // BUTTON_PIN +#define TB_DIRECTION FALLING + +#define ENABLE_AMBIENTLIGHTING From 1f7ed6888a2cd7dcf058958c73ef2fc3d1eadccb Mon Sep 17 00:00:00 2001 From: Andrew Yong Date: Thu, 29 Jan 2026 20:43:48 +0800 Subject: [PATCH 03/14] feat(stm32): Add Milesight GS301 Bathroom Odor Detector (#9359) - STM32WLE5CCU6 - NFC (unsupported): NXP NT3H2211W0FTTJ (NTAG I2C plus: NFC Forum T2T with I2C interface, password protection and energy harvesting) - Sensor (unsupported): Analog ADuCM355 (SHTC3 is connected to ADuCM355 and not directly accessible) - Bicolor LED - User button (presently not functional in STM32 variants) The definitions for sensor voltage control are present but commented out to save power, due to lack of sensor support. Powered by 4x 4000mAh RAMWAY ER18505 Li-SOCl2 batteries. Flashing: 1. Power down device (remove batteries) 2. Connect USB-UART to J1 (USART2), pinout is below, do not connect +3V3 pin yet 3. Short BOOT pins next to J1 4. Connect +3V3 pin or insert batteries while BOOT pins are shorted 5. Use STM32CubeProgrammer, connect by UART mode 6. Load firmware .hex and download J1 (USART2); Molex Picoblade (P=1.25mm * 4) 1. +3V3 2. PA3_USART2_RX_J1 3. PA2_USART2_TX_J1 4. GND Signed-off-by: Andrew Yong Co-authored-by: Ben Meadors --- variants/stm32/milesight_gs301/platformio.ini | 21 ++++++++++ variants/stm32/milesight_gs301/rfswitch.h | 7 ++++ variants/stm32/milesight_gs301/variant.h | 41 +++++++++++++++++++ 3 files changed, 69 insertions(+) create mode 100644 variants/stm32/milesight_gs301/platformio.ini create mode 100644 variants/stm32/milesight_gs301/rfswitch.h create mode 100644 variants/stm32/milesight_gs301/variant.h diff --git a/variants/stm32/milesight_gs301/platformio.ini b/variants/stm32/milesight_gs301/platformio.ini new file mode 100644 index 000000000..a1d3fb34e --- /dev/null +++ b/variants/stm32/milesight_gs301/platformio.ini @@ -0,0 +1,21 @@ +; Milesight GS301 Bathroom Odor Detector +; https://www.milesight.com/iot/product/lorawan-sensor/gs301 +[env:milesight_gs301] +extends = stm32_base +board = wiscore_rak3172 ; Convenient choice as the same USART is used for programming/debug +board_level = extra +board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem +build_flags = + ${stm32_base.build_flags} + -Ivariants/stm32/milesight_gs301 + -DPRIVATE_HW + -DMESHTASTIC_EXCLUDE_GPS=1 + -DMESHTASTIC_EXCLUDE_I2C=1 # Analog ADuCM355 (unsupported) so no point building support for I2C in + -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1 + -DMESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR=1 +build_unflags = + -DDEBUG_MUTE # We have space for debug output until sensor support is added +lib_deps = + ${stm32_base.lib_deps} + +upload_port = stlink diff --git a/variants/stm32/milesight_gs301/rfswitch.h b/variants/stm32/milesight_gs301/rfswitch.h new file mode 100644 index 000000000..d9f60038a --- /dev/null +++ b/variants/stm32/milesight_gs301/rfswitch.h @@ -0,0 +1,7 @@ +// Seems to use the same RF switch pins as RAK3172… getting Tx/Rx SNR +11dB with a nearby node +// PB8, PC13 + +static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PB8, PC13, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC}; + +static const Module::RfSwitchMode_t rfswitch_table[4] = { + {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE}; diff --git a/variants/stm32/milesight_gs301/variant.h b/variants/stm32/milesight_gs301/variant.h new file mode 100644 index 000000000..e86e93fc4 --- /dev/null +++ b/variants/stm32/milesight_gs301/variant.h @@ -0,0 +1,41 @@ +#ifndef _VARIANT_MILESIGHT_GS301_ +#define _VARIANT_MILESIGHT_GS301_ + +#define USE_STM32WLx + +// I/O +#define LED_STATE_ON 1 +#define PIN_LED1 PA0 // Green LED +#define LED_PIN PIN_LED1 +#define PIN_LED2 PA0 // Red LED +#define USER_LED PIN_LED2 +#define BUTTON_PIN PC13 +#define BUTTON_ACTIVE_LOW true +#define BUTTON_ACTIVE_PULLUP false +#define PIN_BUZZER PA6 + +// EC Sense DGM10 Double Gas Module +// Analog ADuCM355 (unsupported); SHTC3 is connected to ADuCM355 and not directly accessible +#define PIN_WIRE_SDA PB7 +#define PIN_WIRE_SCL PB8 +// Commented out to keep sensor powered down due to lack of support +/* +#define VEXT_ENABLE PB12 // TI TPS61291DRV VSEL - set LOW before ENable for Vout = 3.3V +#define VEXT_ON_VALUE LOW +#define SENSOR_POWER_CTRL_PIN PB2 // TI TPS61291DRV EN pin +#define SENSOR_POWER_ON HIGH +#define HAS_SENSOR 1 +*/ + +#define ENABLE_HWSERIAL1 +#define PIN_SERIAL1_RX NC +#define PIN_SERIAL1_TX PB6 + +// LoRa +#define SX126X_DIO3_TCXO_VOLTAGE 3.0 + +// Required to avoid Serial1 conflicts due to board definition here: +// https://github.com/stm32duino/Arduino_Core_STM32/blob/main/variants/STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U/variant_RAK3172_MODULE.h +#define RAK3172 + +#endif From 8af9e7fbdc912ba5b423e4c7885c3380f5d73b88 Mon Sep 17 00:00:00 2001 From: Jorropo Date: Thu, 29 Jan 2026 13:44:17 +0100 Subject: [PATCH 04/14] enable long interleaving mode for LR11x0 and SX128x (#9399) Using long interleaving is not a breaking change, the receiver node is able to use the lora header to know if LI encoding is used or not and will decode LI packets correctly. However the problem is SX127x and other first generation LoRa IP which do not support LI at all, for theses it is a breaking change. HOWEVER due to the sync word bug the LR11x0 already can't talk with SX127x, so if we enable LI on theses no one would be able to tell. Same for SX128x altho this is because it works on 2.4Ghz which is incompatible with SX127x. Co-authored-by: Ben Meadors --- src/mesh/LR11x0Interface.cpp | 2 +- src/mesh/SX128xInterface.cpp | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/mesh/LR11x0Interface.cpp b/src/mesh/LR11x0Interface.cpp index a8a2780ed..7c73b56cd 100644 --- a/src/mesh/LR11x0Interface.cpp +++ b/src/mesh/LR11x0Interface.cpp @@ -170,7 +170,7 @@ template bool LR11x0Interface::reconfigure() if (err != RADIOLIB_ERR_NONE) RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING); - err = lora.setCodingRate(cr); + err = lora.setCodingRate(cr, cr != 7); // use long interleaving except if CR is 4/7 which doesn't support it if (err != RADIOLIB_ERR_NONE) RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING); diff --git a/src/mesh/SX128xInterface.cpp b/src/mesh/SX128xInterface.cpp index 3ab63df3d..9fcedfe49 100644 --- a/src/mesh/SX128xInterface.cpp +++ b/src/mesh/SX128xInterface.cpp @@ -126,7 +126,7 @@ template bool SX128xInterface::reconfigure() if (err != RADIOLIB_ERR_NONE) RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING); - err = lora.setCodingRate(cr); + err = lora.setCodingRate(cr, cr != 7); // use long interleaving except if CR is 4/7 which doesn't support it if (err != RADIOLIB_ERR_NONE) RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING); From 61b39acc7d1d2c15317b2100c960df1d5e69b3d6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Agust=C3=ADn=20Mista?= Date: Thu, 29 Jan 2026 17:06:58 +0100 Subject: [PATCH 05/14] Add initial Nix shell (#8530) * Add initial Nix shell * Update flake.nix Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- .envrc | 1 + .gitignore | 3 +++ flake.lock | 44 ++++++++++++++++++++++++++++++++++++ flake.nix | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ shell.nix | 12 ++++++++++ 5 files changed, 126 insertions(+) create mode 100644 .envrc create mode 100644 flake.lock create mode 100644 flake.nix create mode 100644 shell.nix diff --git a/.envrc b/.envrc new file mode 100644 index 000000000..65326bb6d --- /dev/null +++ b/.envrc @@ -0,0 +1 @@ +use nix \ No newline at end of file diff --git a/.gitignore b/.gitignore index 769603202..d6d97c6c4 100644 --- a/.gitignore +++ b/.gitignore @@ -50,3 +50,6 @@ idf_component.yml CMakeLists.txt /sdkconfig.* .dummy/* + +# PYTHONPATH used by the Nix shell +.python3 diff --git a/flake.lock b/flake.lock new file mode 100644 index 000000000..e7a4c7ff7 --- /dev/null +++ b/flake.lock @@ -0,0 +1,44 @@ +{ + "nodes": { + "flake-compat": { + "flake": false, + "locked": { + "lastModified": 1767039857, + "narHash": "sha256-vNpUSpF5Nuw8xvDLj2KCwwksIbjua2LZCqhV1LNRDns=", + "owner": "NixOS", + "repo": "flake-compat", + "rev": "5edf11c44bc78a0d334f6334cdaf7d60d732daab", + "type": "github" + }, + "original": { + "owner": "NixOS", + "repo": "flake-compat", + "type": "github" + } + }, + "nixpkgs": { + "locked": { + "lastModified": 1766314097, + "narHash": "sha256-laJftWbghBehazn/zxVJ8NdENVgjccsWAdAqKXhErrM=", + "owner": "NixOS", + "repo": "nixpkgs", + "rev": "306ea70f9eb0fb4e040f8540e2deab32ed7e2055", + "type": "github" + }, + "original": { + "owner": "NixOS", + "ref": "nixpkgs-unstable", + "repo": "nixpkgs", + "type": "github" + } + }, + "root": { + "inputs": { + "flake-compat": "flake-compat", + "nixpkgs": "nixpkgs" + } + } + }, + "root": "root", + "version": 7 +} diff --git a/flake.nix b/flake.nix new file mode 100644 index 000000000..1af493c6d --- /dev/null +++ b/flake.nix @@ -0,0 +1,66 @@ +{ + description = "Nix flake to compile Meshtastic firmware"; + + inputs = { + nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable"; + + # Shim to make flake.nix work with stable Nix. + flake-compat = { + url = "github:NixOS/flake-compat"; + flake = false; + }; + }; + + outputs = + inputs: + let + lib = inputs.nixpkgs.lib; + + forAllSystems = + fn: + lib.genAttrs lib.systems.flakeExposed ( + system: + fn { + pkgs = import inputs.nixpkgs { + inherit system; + }; + inherit system; + } + ); + in + { + devShells = forAllSystems ( + { pkgs, ... }: + let + python3 = pkgs.python312.withPackages ( + ps: with ps; [ + google + ] + ); + in + { + default = pkgs.mkShell { + buildInputs = with pkgs; [ + python3 + platformio + ]; + + shellHook = '' + # Set up PlatformIO to use a local core directory. + export PLATFORMIO_CORE_DIR=$PWD/.platformio + # Tell pip to put packages into $PIP_PREFIX instead of the usual + # location. This is especially necessary under NixOS to avoid having + # pip trying to write to the read-only Nix store. For more info, + # see https://wiki.nixos.org/wiki/Python + export PIP_PREFIX=$PWD/.python3 + export PYTHONPATH="$PIP_PREFIX/${python3.sitePackages}" + export PATH="$PIP_PREFIX/bin:$PATH" + # Avoids reproducibility issues with some Python packages + # See https://nixos.org/manual/nixpkgs/stable/#python-setup.py-bdist_wheel-cannot-create-.whl + unset SOURCE_DATE_EPOCH + ''; + }; + } + ); + }; +} diff --git a/shell.nix b/shell.nix new file mode 100644 index 000000000..692cd4df8 --- /dev/null +++ b/shell.nix @@ -0,0 +1,12 @@ +(import ( + let + lock = builtins.fromJSON (builtins.readFile ./flake.lock); + nodeName = lock.nodes.root.inputs.flake-compat; + in + fetchTarball { + url = + lock.nodes.${nodeName}.locked.url + or "https://github.com/NixOS/flake-compat/archive/${lock.nodes.${nodeName}.locked.rev}.tar.gz"; + sha256 = lock.nodes.${nodeName}.locked.narHash; + } +) { src = ./.; }).shellNix From 45fbc0f9d330bced8d23b1f97e9d3d8191f2538c Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Thu, 29 Jan 2026 10:58:06 -0600 Subject: [PATCH 06/14] Remove stale variant.h defines (#9470) * Remove noop CANNED_MESSAGE_MODULE_ENABLE define * Remove over-eager warning removal * Remove unused LED_CONN * Dead defines removal * Rename oddball LED pin name * Rename second oddball LED pin name * Remove another dead define --- src/input/SerialKeyboard.cpp | 1 - src/modules/CannedMessageModule.cpp | 3 +-- src/modules/CannedMessageModule.h | 4 ---- src/modules/StatusLEDModule.cpp | 1 - src/sleep.cpp | 1 - variants/esp32/chatter2/variant.h | 1 - variants/esp32/m5stack_core/platformio.ini | 1 - variants/esp32/tbeam/variant.h | 1 - variants/esp32/trackerd/variant.h | 1 - variants/esp32s3/hackaday-communicator/variant.h | 12 ------------ variants/esp32s3/picomputer-s3/variant.h | 2 -- variants/esp32s3/rak3312/variant.h | 1 - variants/esp32s3/rak_wismesh_tap_v2/variant.h | 3 --- variants/esp32s3/t-deck-pro/variant.h | 1 - variants/esp32s3/t-deck/variant.h | 1 - variants/esp32s3/tlora-pager/variant.h | 1 - variants/esp32s3/tracksenger/internal/variant.h | 1 - variants/esp32s3/tracksenger/lcd/variant.h | 1 - variants/esp32s3/tracksenger/oled/variant.h | 1 - variants/native/portduino-buildroot/variant.h | 1 - variants/native/portduino/variant.h | 1 - .../nrf52840/Dongle_nRF52840-pca10059-v1/variant.h | 2 -- variants/nrf52840/ELECROW-ThinkNode-M1/variant.h | 3 --- variants/nrf52840/ELECROW-ThinkNode-M3/variant.cpp | 12 ++++++------ variants/nrf52840/ELECROW-ThinkNode-M3/variant.h | 8 ++++---- variants/nrf52840/MakePython_nRF52840_eink/variant.h | 2 -- variants/nrf52840/MakePython_nRF52840_oled/variant.h | 2 -- variants/nrf52840/TWC_mesh_v4/variant.h | 2 -- variants/nrf52840/canaryone/variant.h | 2 -- .../diy/seeed-xiao-nrf52840-wio-sx1262/variant.h | 1 - .../nrf52840/gat562_mesh_trial_tracker/variant.h | 4 ---- .../nrf52840/heltec_mesh_node_t114-inkhud/variant.h | 2 -- variants/nrf52840/heltec_mesh_node_t114/variant.h | 2 -- variants/nrf52840/heltec_mesh_pocket/variant.h | 3 --- variants/nrf52840/heltec_mesh_solar/variant.h | 2 -- variants/nrf52840/meshtiny/variant.h | 4 ---- variants/nrf52840/monteops_hw1/variant.h | 4 ---- variants/nrf52840/nano-g2-ultra/variant.h | 4 ---- variants/nrf52840/r1-neo/variant.h | 2 -- variants/nrf52840/rak2560/variant.h | 4 ---- variants/nrf52840/rak3401_1watt/variant.h | 2 -- variants/nrf52840/rak4631/variant.h | 4 ---- variants/nrf52840/rak4631_epaper/variant.h | 4 ---- variants/nrf52840/rak4631_epaper_onrxtx/variant.h | 2 -- variants/nrf52840/rak4631_eth_gw/variant.h | 4 ---- .../nrf52840/rak4631_nomadstar_meteor_pro/variant.h | 4 ---- variants/nrf52840/rak_wismeshtag/variant.h | 4 ---- variants/nrf52840/rak_wismeshtap/variant.h | 6 ------ variants/nrf52840/seeed_solar_node/variant.h | 2 -- variants/nrf52840/seeed_wio_tracker_L1/variant.h | 4 ---- .../nrf52840/seeed_wio_tracker_L1_eink/variant.h | 3 --- variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h | 1 - variants/nrf52840/t-echo-lite/variant.h | 1 - variants/nrf52840/t-echo-plus/variant.h | 2 -- variants/nrf52840/t-echo/variant.h | 3 --- variants/rp2040/rak11310/variant.h | 1 - 56 files changed, 11 insertions(+), 141 deletions(-) diff --git a/src/input/SerialKeyboard.cpp b/src/input/SerialKeyboard.cpp index a5d2c614f..8037b0d57 100644 --- a/src/input/SerialKeyboard.cpp +++ b/src/input/SerialKeyboard.cpp @@ -5,7 +5,6 @@ SerialKeyboard *globalSerialKeyboard = nullptr; #ifdef INPUTBROKER_SERIAL_TYPE -#define CANNED_MESSAGE_MODULE_ENABLE 1 // in case it's not set in the variant file #if INPUTBROKER_SERIAL_TYPE == 1 // It's a Chatter // 3 SHIFT level (lower case, upper case, numbers), up to 4 repeated presses, button number diff --git a/src/modules/CannedMessageModule.cpp b/src/modules/CannedMessageModule.cpp index 8d1ba6346..7d7b3cdb1 100644 --- a/src/modules/CannedMessageModule.cpp +++ b/src/modules/CannedMessageModule.cpp @@ -130,8 +130,7 @@ CannedMessageModule::CannedMessageModule() : SinglePortModule("canned", meshtastic_PortNum_TEXT_MESSAGE_APP), concurrency::OSThread("CannedMessage") { this->loadProtoForModule(); - if ((this->splitConfiguredMessages() <= 0) && (cardkb_found.address == 0x00) && !INPUTBROKER_MATRIX_TYPE && - !CANNED_MESSAGE_MODULE_ENABLE) { + if ((this->splitConfiguredMessages() <= 0) && (cardkb_found.address == 0x00) && !INPUTBROKER_MATRIX_TYPE) { LOG_INFO("CannedMessageModule: No messages are configured. Module is disabled"); this->runState = CANNED_MESSAGE_RUN_STATE_DISABLED; disable(); diff --git a/src/modules/CannedMessageModule.h b/src/modules/CannedMessageModule.h index 3d7c09d87..65715dd22 100644 --- a/src/modules/CannedMessageModule.h +++ b/src/modules/CannedMessageModule.h @@ -27,10 +27,6 @@ enum CannedMessageModuleIconType { shift, backspace, space, enter }; #define CANNED_MESSAGE_MODULE_MESSAGE_MAX_COUNT 50 #define CANNED_MESSAGE_MODULE_MESSAGES_SIZE 800 -#ifndef CANNED_MESSAGE_MODULE_ENABLE -#define CANNED_MESSAGE_MODULE_ENABLE 0 -#endif - // ============================ // Data Structures // ============================ diff --git a/src/modules/StatusLEDModule.cpp b/src/modules/StatusLEDModule.cpp index fed035513..e7a405bdf 100644 --- a/src/modules/StatusLEDModule.cpp +++ b/src/modules/StatusLEDModule.cpp @@ -130,7 +130,6 @@ int32_t StatusLEDModule::runOnce() #ifdef LED_CHARGE digitalWrite(LED_CHARGE, CHARGE_LED_state); #endif - // digitalWrite(green_LED_PIN, LED_STATE_OFF); #ifdef LED_PAIRING digitalWrite(LED_PAIRING, PAIRING_LED_state); #endif diff --git a/src/sleep.cpp b/src/sleep.cpp index 756582c74..8b30a5352 100644 --- a/src/sleep.cpp +++ b/src/sleep.cpp @@ -241,7 +241,6 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN #ifdef PIN_POWER_EN digitalWrite(PIN_POWER_EN, LOW); pinMode(PIN_POWER_EN, INPUT); // power off peripherals - // pinMode(PIN_POWER_EN1, INPUT_PULLDOWN); #endif #ifdef RAK_WISMESH_TAP_V2 diff --git a/variants/esp32/chatter2/variant.h b/variants/esp32/chatter2/variant.h index abcb1ce4d..28ce64f91 100644 --- a/variants/esp32/chatter2/variant.h +++ b/variants/esp32/chatter2/variant.h @@ -98,7 +98,6 @@ #define KB_LOAD 21 // load values from the switch and store in shift register #define KB_CLK 22 // clock pin for serial data out #define KB_DATA 23 // data pin -#define CANNED_MESSAGE_MODULE_ENABLE 1 ///////////////////////////////////////////////////////////////////////////////// // // diff --git a/variants/esp32/m5stack_core/platformio.ini b/variants/esp32/m5stack_core/platformio.ini index 5e41d5f2b..8fbbae895 100644 --- a/variants/esp32/m5stack_core/platformio.ini +++ b/variants/esp32/m5stack_core/platformio.ini @@ -30,7 +30,6 @@ build_flags = -DTFT_BL=32 -DSPI_FREQUENCY=40000000 -DSPI_READ_FREQUENCY=16000000 - -DDISABLE_ALL_LIBRARY_WARNINGS lib_ignore = m5stack-core lib_deps = diff --git a/variants/esp32/tbeam/variant.h b/variants/esp32/tbeam/variant.h index 2d144a888..2c1e61c49 100644 --- a/variants/esp32/tbeam/variant.h +++ b/variants/esp32/tbeam/variant.h @@ -57,7 +57,6 @@ #ifndef TOUCH_IRQ #define TOUCH_IRQ -1 #endif -#define CANNED_MESSAGE_MODULE_ENABLE 1 #define USE_VIRTUAL_KEYBOARD 1 #define ST7796_NSS 25 diff --git a/variants/esp32/trackerd/variant.h b/variants/esp32/trackerd/variant.h index c4dfb9e93..0996e85ac 100644 --- a/variants/esp32/trackerd/variant.h +++ b/variants/esp32/trackerd/variant.h @@ -10,7 +10,6 @@ #define LED_PIN 13 // 13 red, 2 blue, 15 red -// #define HAS_BUTTON 0 #define BUTTON_PIN 0 #define BUTTON_NEED_PULLUP diff --git a/variants/esp32s3/hackaday-communicator/variant.h b/variants/esp32s3/hackaday-communicator/variant.h index a127f548f..7e048d72c 100644 --- a/variants/esp32s3/hackaday-communicator/variant.h +++ b/variants/esp32s3/hackaday-communicator/variant.h @@ -16,22 +16,12 @@ #define SLEEP_TIME 120 #define GPS_DEFAULT_NOT_PRESENT 1 -// #define GPS_RX_PIN 44 -// #define GPS_TX_PIN 43 - -// #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage -// ratio of voltage divider = 2.0 (RD2=100k, RD3=100k) -// #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage. -// #define ADC_CHANNEL ADC1_GPIO4_CHANNEL // keyboard #define I2C_SDA 47 // I2C pins for this board #define I2C_SCL 14 -// #define KB_POWERON -1 // must be set to HIGH -// #define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55 // #define KB_BL_PIN 46 // not used for now #define KB_INT 13 -#define CANNED_MESSAGE_MODULE_ENABLE 1 #define TFT_DC 39 #define TFT_CS 41 @@ -44,11 +34,9 @@ #define LORA_MOSI 3 #define LORA_CS 17 -// #define LORA_DIO0 -1 // a No connect on the SX1262 module #define LORA_RESET 18 #define LORA_DIO1 16 // SX1262 IRQ #define LORA_DIO2 15 // SX1262 BUSY -// #define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled #define SX126X_CS LORA_CS #define SX126X_DIO1 LORA_DIO1 diff --git a/variants/esp32s3/picomputer-s3/variant.h b/variants/esp32s3/picomputer-s3/variant.h index 275da1b61..7b6218f87 100644 --- a/variants/esp32s3/picomputer-s3/variant.h +++ b/variants/esp32s3/picomputer-s3/variant.h @@ -52,8 +52,6 @@ // Picomputer gets a white on black display #define TFT_MESH_OVERRIDE COLOR565(255, 255, 255) -#define CANNED_MESSAGE_MODULE_ENABLE 1 - #define INPUTBROKER_MATRIX_TYPE 1 #define KEYS_COLS \ diff --git a/variants/esp32s3/rak3312/variant.h b/variants/esp32s3/rak3312/variant.h index 1f8eb9e39..4d860e476 100644 --- a/variants/esp32s3/rak3312/variant.h +++ b/variants/esp32s3/rak3312/variant.h @@ -24,7 +24,6 @@ #define PIN_LED1 LED_GREEN #define PIN_LED2 LED_BLUE -#define LED_CONN LED_BLUE #define LED_PIN LED_GREEN #define ledOff(pin) pinMode(pin, INPUT) diff --git a/variants/esp32s3/rak_wismesh_tap_v2/variant.h b/variants/esp32s3/rak_wismesh_tap_v2/variant.h index 2fc056557..f94b7ca4e 100644 --- a/variants/esp32s3/rak_wismesh_tap_v2/variant.h +++ b/variants/esp32s3/rak_wismesh_tap_v2/variant.h @@ -32,7 +32,6 @@ #define PIN_LED1 LED_GREEN #define PIN_LED2 LED_BLUE -#define LED_CONN LED_BLUE #define LED_PIN LED_GREEN #define ledOff(pin) pinMode(pin, INPUT) @@ -47,10 +46,8 @@ #define SPI_MISO (10) #define SPI_CS (12) -#define HAS_BUTTON 1 #define BUTTON_PIN 0 -#define CANNED_MESSAGE_MODULE_ENABLE 1 #define USE_VIRTUAL_KEYBOARD 1 #define BATTERY_PIN 1 diff --git a/variants/esp32s3/t-deck-pro/variant.h b/variants/esp32s3/t-deck-pro/variant.h index 36a1310f1..d95f07f3a 100644 --- a/variants/esp32s3/t-deck-pro/variant.h +++ b/variants/esp32s3/t-deck-pro/variant.h @@ -43,7 +43,6 @@ // TCA8418 keyboard #define KB_BL_PIN 42 -#define CANNED_MESSAGE_MODULE_ENABLE 1 // microphone PCM5102A #define PCM5102A_SCK 47 diff --git a/variants/esp32s3/t-deck/variant.h b/variants/esp32s3/t-deck/variant.h index ab5b74870..5d885579a 100644 --- a/variants/esp32s3/t-deck/variant.h +++ b/variants/esp32s3/t-deck/variant.h @@ -61,7 +61,6 @@ #define KB_POWERON 10 // must be set to HIGH #define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55 #define KB_BL_PIN 46 // not used for now -#define CANNED_MESSAGE_MODULE_ENABLE 1 // trackball #define HAS_TRACKBALL 1 diff --git a/variants/esp32s3/tlora-pager/variant.h b/variants/esp32s3/tlora-pager/variant.h index 565f4f580..e2d4029be 100644 --- a/variants/esp32s3/tlora-pager/variant.h +++ b/variants/esp32s3/tlora-pager/variant.h @@ -61,7 +61,6 @@ #define I2C_NO_RESCAN #define KB_BL_PIN 46 #define KB_INT 6 -#define CANNED_MESSAGE_MODULE_ENABLE 1 // audio codec ES8311 #define HAS_I2S diff --git a/variants/esp32s3/tracksenger/internal/variant.h b/variants/esp32s3/tracksenger/internal/variant.h index 2287dfe0b..ba3e281c8 100644 --- a/variants/esp32s3/tracksenger/internal/variant.h +++ b/variants/esp32s3/tracksenger/internal/variant.h @@ -78,7 +78,6 @@ // keyboard changes #define PIN_BUZZER 43 -#define CANNED_MESSAGE_MODULE_ENABLE 1 #define INPUTBROKER_MATRIX_TYPE 1 diff --git a/variants/esp32s3/tracksenger/lcd/variant.h b/variants/esp32s3/tracksenger/lcd/variant.h index f42a5b19f..a9bb89d68 100644 --- a/variants/esp32s3/tracksenger/lcd/variant.h +++ b/variants/esp32s3/tracksenger/lcd/variant.h @@ -102,7 +102,6 @@ // keyboard changes #define PIN_BUZZER 43 -#define CANNED_MESSAGE_MODULE_ENABLE 1 #define INPUTBROKER_MATRIX_TYPE 1 diff --git a/variants/esp32s3/tracksenger/oled/variant.h b/variants/esp32s3/tracksenger/oled/variant.h index 85cc019c4..689864b32 100644 --- a/variants/esp32s3/tracksenger/oled/variant.h +++ b/variants/esp32s3/tracksenger/oled/variant.h @@ -79,7 +79,6 @@ // keyboard changes #define PIN_BUZZER 43 -#define CANNED_MESSAGE_MODULE_ENABLE 1 #define INPUTBROKER_MATRIX_TYPE 1 diff --git a/variants/native/portduino-buildroot/variant.h b/variants/native/portduino-buildroot/variant.h index affd83051..ac6421b14 100644 --- a/variants/native/portduino-buildroot/variant.h +++ b/variants/native/portduino-buildroot/variant.h @@ -1,6 +1,5 @@ #define HAS_SCREEN 1 #define USE_TFTDISPLAY 1 -#define CANNED_MESSAGE_MODULE_ENABLE 1 #define HAS_GPS 1 #define MAX_RX_TOPHONE portduino_config.maxtophone #define MAX_NUM_NODES portduino_config.MaxNodes diff --git a/variants/native/portduino/variant.h b/variants/native/portduino/variant.h index 972443450..cba4aaedd 100644 --- a/variants/native/portduino/variant.h +++ b/variants/native/portduino/variant.h @@ -2,7 +2,6 @@ #define HAS_SCREEN 1 #endif #define USE_TFTDISPLAY 1 -#define CANNED_MESSAGE_MODULE_ENABLE 1 #define HAS_GPS 1 #define MAX_RX_TOPHONE portduino_config.maxtophone #define MAX_NUM_NODES portduino_config.MaxNodes diff --git a/variants/nrf52840/Dongle_nRF52840-pca10059-v1/variant.h b/variants/nrf52840/Dongle_nRF52840-pca10059-v1/variant.h index d120e485c..8baf25e87 100644 --- a/variants/nrf52840/Dongle_nRF52840-pca10059-v1/variant.h +++ b/variants/nrf52840/Dongle_nRF52840-pca10059-v1/variant.h @@ -50,8 +50,6 @@ extern "C" { #define RGBLED_BLUE (0 + 12) // Blue of RGB P0.12 #define RGBLED_CA // comment out this line if you have a common cathode type, as defined use common anode logic -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 diff --git a/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h b/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h index c36211a63..a8c7b42b5 100644 --- a/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h +++ b/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h @@ -55,7 +55,6 @@ extern "C" { #define LED_RED PIN_LED3 #define LED_BLUE PIN_LED1 #define LED_GREEN PIN_LED2 -#define LED_CONN PIN_GREEN #define LED_STATE_ON 0 // State when LED is lit // LED灯亮时的状态 #define PIN_BUZZER (0 + 6) /* @@ -170,8 +169,6 @@ External serial flash WP25R1635FZUIL0 #define PIN_SPI_MOSI (0 + 22) #define PIN_SPI_SCK (0 + 19) -#define PIN_PWR_EN (0 + 6) - // To debug via the segger JLINK console rather than the CDC-ACM serial device // #define USE_SEGGER diff --git a/variants/nrf52840/ELECROW-ThinkNode-M3/variant.cpp b/variants/nrf52840/ELECROW-ThinkNode-M3/variant.cpp index 9769e3edd..45a64ad3b 100644 --- a/variants/nrf52840/ELECROW-ThinkNode-M3/variant.cpp +++ b/variants/nrf52840/ELECROW-ThinkNode-M3/variant.cpp @@ -37,8 +37,8 @@ void initVariant() digitalWrite(KEY_POWER, HIGH); pinMode(RGB_POWER, OUTPUT); digitalWrite(RGB_POWER, HIGH); - pinMode(green_LED_PIN, OUTPUT); - digitalWrite(green_LED_PIN, LED_STATE_OFF); + pinMode(LED_GREEN, OUTPUT); + digitalWrite(LED_GREEN, LED_STATE_OFF); pinMode(LED_BLUE, OUTPUT); pinMode(PIN_POWER_USB, INPUT); pinMode(PIN_POWER_DONE, INPUT); @@ -63,8 +63,8 @@ void initVariant() // called from main-nrf52.cpp during the cpuDeepSleep() function void variant_shutdown() { - digitalWrite(red_LED_PIN, HIGH); - digitalWrite(green_LED_PIN, HIGH); + digitalWrite(LED_RED, HIGH); + digitalWrite(LED_GREEN, HIGH); digitalWrite(LED_BLUE, HIGH); digitalWrite(PIN_EN1, LOW); @@ -81,8 +81,8 @@ void variant_shutdown() if (pin == PIN_POWER_USB || pin == BUTTON_PIN || pin == PIN_EN1 || pin == PIN_EN2 || pin == DHT_POWER || pin == ACC_POWER || pin == Battery_POWER || pin == GPS_POWER || pin == LR1110_SPI_MISO_PIN || pin == LR1110_SPI_MOSI_PIN || pin == LR1110_SPI_SCK_PIN || pin == LR1110_SPI_NSS_PIN || pin == LR1110_BUSY_PIN || - pin == LR1110_NRESET_PIN || pin == LR1110_IRQ_PIN || pin == GPS_TX_PIN || pin == GPS_RX_PIN || pin == green_LED_PIN || - pin == red_LED_PIN || pin == LED_BLUE) { + pin == LR1110_NRESET_PIN || pin == LR1110_IRQ_PIN || pin == GPS_TX_PIN || pin == GPS_RX_PIN || pin == LED_GREEN || + pin == LED_RED || pin == LED_BLUE) { continue; } pinMode(pin, OUTPUT); diff --git a/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h b/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h index acbcf6ae5..955a16a88 100644 --- a/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h +++ b/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h @@ -50,11 +50,11 @@ extern "C" { #define EEPROM_POWER 7 // LED -#define red_LED_PIN 33 -#define LED_POWER red_LED_PIN +#define LED_RED 33 +#define LED_POWER LED_RED #define LED_CHARGE LED_POWER // Signals the Status LED Module to handle this LED -#define green_LED_PIN 35 -#define PIN_LED2 green_LED_PIN +#define LED_GREEN 35 +#define PIN_LED2 LED_GREEN #define LED_BLUE 37 #define LED_PAIRING LED_BLUE // Signals the Status LED Module to handle this LED diff --git a/variants/nrf52840/MakePython_nRF52840_eink/variant.h b/variants/nrf52840/MakePython_nRF52840_eink/variant.h index 91ca39d1d..48256e65f 100644 --- a/variants/nrf52840/MakePython_nRF52840_eink/variant.h +++ b/variants/nrf52840/MakePython_nRF52840_eink/variant.h @@ -29,8 +29,6 @@ extern "C" { #define PIN_LED1 (32 + 10) // LED P1.15 #define PIN_LED2 (-1) // -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 diff --git a/variants/nrf52840/MakePython_nRF52840_oled/variant.h b/variants/nrf52840/MakePython_nRF52840_oled/variant.h index 286c5c251..025324037 100644 --- a/variants/nrf52840/MakePython_nRF52840_oled/variant.h +++ b/variants/nrf52840/MakePython_nRF52840_oled/variant.h @@ -29,8 +29,6 @@ extern "C" { #define PIN_LED1 (32 + 10) // LED P1.15 #define PIN_LED2 (-1) // -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 diff --git a/variants/nrf52840/TWC_mesh_v4/variant.h b/variants/nrf52840/TWC_mesh_v4/variant.h index 5b4623210..875040b5f 100644 --- a/variants/nrf52840/TWC_mesh_v4/variant.h +++ b/variants/nrf52840/TWC_mesh_v4/variant.h @@ -34,8 +34,6 @@ extern "C" { // #define PIN_LED1 (32 + 9) Green // #define PIN_LED1 (0 + 12) Blue -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 diff --git a/variants/nrf52840/canaryone/variant.h b/variants/nrf52840/canaryone/variant.h index 4d388c376..3f45b618a 100644 --- a/variants/nrf52840/canaryone/variant.h +++ b/variants/nrf52840/canaryone/variant.h @@ -52,8 +52,6 @@ extern "C" { #define LED_BLUE PIN_LED1 -#define LED_CONN PIN_LED3 - #define LED_STATE_ON 0 // State when LED is lit /* diff --git a/variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/variant.h b/variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/variant.h index 407bc1541..6927f1295 100644 --- a/variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/variant.h +++ b/variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/variant.h @@ -36,7 +36,6 @@ extern "C" { #define PIN_LED3 LED_RED #define PIN_LED PIN_LED1 -#define LED_PWR (PINS_COUNT) #define LED_STATE_ON 1 // State when LED is lit diff --git a/variants/nrf52840/gat562_mesh_trial_tracker/variant.h b/variants/nrf52840/gat562_mesh_trial_tracker/variant.h index 282953cd9..0e37eeeff 100644 --- a/variants/nrf52840/gat562_mesh_trial_tracker/variant.h +++ b/variants/nrf52840/gat562_mesh_trial_tracker/variant.h @@ -48,8 +48,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 @@ -62,8 +60,6 @@ extern "C" { #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion #define BUTTON_NEED_PULLUP #define PIN_BUTTON2 12 -#define PIN_BUTTON3 24 -#define PIN_BUTTON4 25 /* * Analog pins diff --git a/variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.h b/variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.h index 96fa35869..2802e4c1d 100644 --- a/variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.h +++ b/variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.h @@ -137,8 +137,6 @@ No longer populated on PCB #define PIN_SPI1_MOSI PIN_EINK_MOSI #define PIN_SPI1_SCK PIN_EINK_SCLK -// #define PIN_PWR_EN (0 + 6) - // To debug via the segger JLINK console rather than the CDC-ACM serial device // #define USE_SEGGER diff --git a/variants/nrf52840/heltec_mesh_node_t114/variant.h b/variants/nrf52840/heltec_mesh_node_t114/variant.h index b3aa942ff..fe825089e 100644 --- a/variants/nrf52840/heltec_mesh_node_t114/variant.h +++ b/variants/nrf52840/heltec_mesh_node_t114/variant.h @@ -192,8 +192,6 @@ No longer populated on PCB #define PIN_SPI_MOSI (0 + 22) #define PIN_SPI_SCK (0 + 19) -// #define PIN_PWR_EN (0 + 6) - // To debug via the segger JLINK console rather than the CDC-ACM serial device // #define USE_SEGGER diff --git a/variants/nrf52840/heltec_mesh_pocket/variant.h b/variants/nrf52840/heltec_mesh_pocket/variant.h index c80fefd58..a86faf575 100644 --- a/variants/nrf52840/heltec_mesh_pocket/variant.h +++ b/variants/nrf52840/heltec_mesh_pocket/variant.h @@ -26,7 +26,6 @@ extern "C" { #define LED_RED PIN_LED1 #define LED_BLUE PIN_LED1 #define LED_GREEN PIN_LED1 -#define LED_CONN LED_BLUE #define LED_STATE_ON 0 // State when LED is lit /* @@ -99,8 +98,6 @@ No longer populated on PCB #define PIN_SPI_MOSI (0 + 5) #define PIN_SPI_SCK (0 + 4) -// #define PIN_PWR_EN (0 + 6) - // To debug via the segger JLINK console rather than the CDC-ACM serial device // #define USE_SEGGER diff --git a/variants/nrf52840/heltec_mesh_solar/variant.h b/variants/nrf52840/heltec_mesh_solar/variant.h index 298475401..8d4db4bea 100644 --- a/variants/nrf52840/heltec_mesh_solar/variant.h +++ b/variants/nrf52840/heltec_mesh_solar/variant.h @@ -132,8 +132,6 @@ No longer populated on PCB #define PIN_SPI_MOSI (0 + 22) #define PIN_SPI_SCK (0 + 19) -// #define PIN_PWR_EN (0 + 6) - // To debug via the segger JLINK console rather than the CDC-ACM serial device // #define USE_SEGGER diff --git a/variants/nrf52840/meshtiny/variant.h b/variants/nrf52840/meshtiny/variant.h index d2cffd169..4a99def7d 100644 --- a/variants/nrf52840/meshtiny/variant.h +++ b/variants/nrf52840/meshtiny/variant.h @@ -49,8 +49,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 @@ -65,8 +63,6 @@ extern "C" { #define INPUTDRIVER_ENCODER_BTN 28 #define UPDOWN_LONG_PRESS_REPEAT_INTERVAL 150 -#define CANNED_MESSAGE_MODULE_ENABLE 1 - /* * Buzzer - PWM */ diff --git a/variants/nrf52840/monteops_hw1/variant.h b/variants/nrf52840/monteops_hw1/variant.h index e5896091b..9560d076b 100644 --- a/variants/nrf52840/monteops_hw1/variant.h +++ b/variants/nrf52840/monteops_hw1/variant.h @@ -52,8 +52,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) // Connected to WWAN host LED (if present) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 @@ -66,8 +64,6 @@ extern "C" { // #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion #define BUTTON_NEED_PULLUP #define PIN_BUTTON2 12 -#define PIN_BUTTON3 24 -#define PIN_BUTTON4 25 /* * Analog pins diff --git a/variants/nrf52840/nano-g2-ultra/variant.h b/variants/nrf52840/nano-g2-ultra/variant.h index 8c3451835..6e7cbdc45 100644 --- a/variants/nrf52840/nano-g2-ultra/variant.h +++ b/variants/nrf52840/nano-g2-ultra/variant.h @@ -50,8 +50,6 @@ extern "C" { #define LED_BLUE PIN_LED1 #define LED_GREEN PIN_LED2 -#define LED_CONN PIN_GREEN - #define LED_STATE_ON 0 // State when LED is lit /* @@ -152,8 +150,6 @@ External serial flash W25Q16JV_IQ #define PIN_SPI_MOSI (0 + 11) #define PIN_SPI_SCK (0 + 12) -// #define PIN_PWR_EN (0 + 6) - // To debug via the segger JLINK console rather than the CDC-ACM serial device // #define USE_SEGGER diff --git a/variants/nrf52840/r1-neo/variant.h b/variants/nrf52840/r1-neo/variant.h index 830126812..acad61a51 100644 --- a/variants/nrf52840/r1-neo/variant.h +++ b/variants/nrf52840/r1-neo/variant.h @@ -47,8 +47,6 @@ extern "C" { #define PIN_LED1 (32 + 4) // P1.04 Controls Green LED #define PIN_LED2 (28) // P0.28 Controls Blue LED -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 diff --git a/variants/nrf52840/rak2560/variant.h b/variants/nrf52840/rak2560/variant.h index 2fa0bd1e7..b6b8f0d6d 100644 --- a/variants/nrf52840/rak2560/variant.h +++ b/variants/nrf52840/rak2560/variant.h @@ -48,8 +48,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 @@ -62,8 +60,6 @@ extern "C" { #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion #define BUTTON_NEED_PULLUP #define PIN_BUTTON2 12 -#define PIN_BUTTON3 24 -#define PIN_BUTTON4 25 /* * Analog pins diff --git a/variants/nrf52840/rak3401_1watt/variant.h b/variants/nrf52840/rak3401_1watt/variant.h index 4cc565d98..f98f7c400 100644 --- a/variants/nrf52840/rak3401_1watt/variant.h +++ b/variants/nrf52840/rak3401_1watt/variant.h @@ -47,8 +47,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 diff --git a/variants/nrf52840/rak4631/variant.h b/variants/nrf52840/rak4631/variant.h index b0215ad28..fd1e7cc4b 100644 --- a/variants/nrf52840/rak4631/variant.h +++ b/variants/nrf52840/rak4631/variant.h @@ -47,8 +47,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 @@ -61,8 +59,6 @@ extern "C" { #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion #define BUTTON_NEED_PULLUP #define PIN_BUTTON2 12 -#define PIN_BUTTON3 24 -#define PIN_BUTTON4 25 /* * Analog pins diff --git a/variants/nrf52840/rak4631_epaper/variant.h b/variants/nrf52840/rak4631_epaper/variant.h index 574a0e68f..8029baf81 100644 --- a/variants/nrf52840/rak4631_epaper/variant.h +++ b/variants/nrf52840/rak4631_epaper/variant.h @@ -47,8 +47,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 @@ -61,8 +59,6 @@ extern "C" { #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion #define BUTTON_NEED_PULLUP #define PIN_BUTTON2 12 -#define PIN_BUTTON3 24 -#define PIN_BUTTON4 25 /* * Analog pins diff --git a/variants/nrf52840/rak4631_epaper_onrxtx/variant.h b/variants/nrf52840/rak4631_epaper_onrxtx/variant.h index 7f1a5d112..9e57f9503 100644 --- a/variants/nrf52840/rak4631_epaper_onrxtx/variant.h +++ b/variants/nrf52840/rak4631_epaper_onrxtx/variant.h @@ -29,8 +29,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 diff --git a/variants/nrf52840/rak4631_eth_gw/variant.h b/variants/nrf52840/rak4631_eth_gw/variant.h index 2e8ae129c..0fcffe5b6 100644 --- a/variants/nrf52840/rak4631_eth_gw/variant.h +++ b/variants/nrf52840/rak4631_eth_gw/variant.h @@ -47,8 +47,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 @@ -61,8 +59,6 @@ extern "C" { #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion #define BUTTON_NEED_PULLUP #define PIN_BUTTON2 12 -#define PIN_BUTTON3 24 -#define PIN_BUTTON4 25 /* * Analog pins diff --git a/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h b/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h index 84793bfb3..50c6ab573 100644 --- a/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h +++ b/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h @@ -47,8 +47,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 @@ -61,8 +59,6 @@ extern "C" { #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion #define BUTTON_NEED_PULLUP #define PIN_BUTTON2 12 -#define PIN_BUTTON3 24 -#define PIN_BUTTON4 25 /* * Analog pins diff --git a/variants/nrf52840/rak_wismeshtag/variant.h b/variants/nrf52840/rak_wismeshtag/variant.h index c31443371..354772e66 100644 --- a/variants/nrf52840/rak_wismeshtag/variant.h +++ b/variants/nrf52840/rak_wismeshtag/variant.h @@ -47,8 +47,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 @@ -61,8 +59,6 @@ extern "C" { #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion #define BUTTON_NEED_PULLUP #define PIN_BUTTON2 12 -#define PIN_BUTTON3 24 -#define PIN_BUTTON4 25 /* * Analog pins diff --git a/variants/nrf52840/rak_wismeshtap/variant.h b/variants/nrf52840/rak_wismeshtap/variant.h index a6eccc3c8..2cd7279f9 100644 --- a/variants/nrf52840/rak_wismeshtap/variant.h +++ b/variants/nrf52840/rak_wismeshtap/variant.h @@ -47,8 +47,6 @@ extern "C" { #define PIN_LED1 (35) #define PIN_LED2 (36) -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 @@ -61,8 +59,6 @@ extern "C" { #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion such as the RAK14014 or RAK14015 TFT modules #define BUTTON_NEED_PULLUP #define PIN_BUTTON2 12 -#define PIN_BUTTON3 24 -#define PIN_BUTTON4 25 /* * Analog pins @@ -282,7 +278,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG #define RAK14014 // Tell it we have a RAK14014 #define USER_SETUP_LOADED 1 -#define DISABLE_ALL_LIBRARY_WARNINGS 1 #define ST7789_DRIVER 1 #define TFT_WIDTH 240 #define TFT_HEIGHT 320 @@ -310,7 +305,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG #define USE_POWERSAVE #define SLEEP_TIME 120 -#define CANNED_MESSAGE_MODULE_ENABLE 1 #define USE_VIRTUAL_KEYBOARD 1 /*---------------------------------------------------------------------------- * Arduino objects - C++ only diff --git a/variants/nrf52840/seeed_solar_node/variant.h b/variants/nrf52840/seeed_solar_node/variant.h index 7473fd073..cbc8181a9 100644 --- a/variants/nrf52840/seeed_solar_node/variant.h +++ b/variants/nrf52840/seeed_solar_node/variant.h @@ -23,8 +23,6 @@ #define PIN_LED1 (12) // LED P1.15 #define PIN_LED2 (11) // -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 // #define LED_PIN PIN_LED2 diff --git a/variants/nrf52840/seeed_wio_tracker_L1/variant.h b/variants/nrf52840/seeed_wio_tracker_L1/variant.h index 70b35336b..2d0ff2020 100644 --- a/variants/nrf52840/seeed_wio_tracker_L1/variant.h +++ b/variants/nrf52840/seeed_wio_tracker_L1/variant.h @@ -23,8 +23,6 @@ #define PIN_LED1 (11) // LED P1.15 #define PIN_LED2 (12) // -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 // #define LED_PIN PIN_LED2 @@ -157,8 +155,6 @@ static const uint8_t SCL = PIN_WIRE_SCL; // joystick // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ -#define CANNED_MESSAGE_MODULE_ENABLE 1 - #define CANNED_MESSAGE_ADD_CONFIRMATION 1 // trackball diff --git a/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h b/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h index 87aa5bb80..3dd1ca21b 100644 --- a/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h +++ b/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h @@ -23,8 +23,6 @@ #define PIN_LED1 (11) // LED P1.15 #define PIN_LED2 (12) // -#define LED_CONN PIN_LED2 - #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 // #define LED_PIN PIN_LED2 @@ -176,7 +174,6 @@ static const uint8_t SCL = PIN_WIRE_SCL; #define TB_PRESS 29 #define TB_DIRECTION FALLING -#define CANNED_MESSAGE_MODULE_ENABLE 1 #define CANNED_MESSAGE_ADD_CONFIRMATION 1 // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ diff --git a/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h b/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h index e4305a57a..a9ccb2aae 100644 --- a/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h +++ b/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h @@ -69,7 +69,6 @@ static const uint8_t A5 = PIN_A5; #define PIN_LED2 LED_BLUE #define PIN_LED3 LED_RED -#define LED_PWR LED_RED #define USER_LED LED_BLUE /* diff --git a/variants/nrf52840/t-echo-lite/variant.h b/variants/nrf52840/t-echo-lite/variant.h index de93b10f4..7dc1a3ef5 100644 --- a/variants/nrf52840/t-echo-lite/variant.h +++ b/variants/nrf52840/t-echo-lite/variant.h @@ -52,7 +52,6 @@ extern "C" { #define BLE_LED LED_BLUE #define BLE_LED_INVERTED 1 -#define LED_CONN LED_GREEN #define LED_STATE_ON 0 // State when LED is lit // Buttons diff --git a/variants/nrf52840/t-echo-plus/variant.h b/variants/nrf52840/t-echo-plus/variant.h index 7e5235902..4038ce6ef 100644 --- a/variants/nrf52840/t-echo-plus/variant.h +++ b/variants/nrf52840/t-echo-plus/variant.h @@ -25,8 +25,6 @@ extern "C" { #define LED_BLUE PIN_LED1 #define LED_GREEN PIN_LED2 -#define LED_CONN LED_GREEN - #define LED_STATE_ON 0 // Buttons / touch diff --git a/variants/nrf52840/t-echo/variant.h b/variants/nrf52840/t-echo/variant.h index 7714f5ce3..f6f650315 100644 --- a/variants/nrf52840/t-echo/variant.h +++ b/variants/nrf52840/t-echo/variant.h @@ -52,8 +52,6 @@ extern "C" { #define LED_BLUE PIN_LED1 #define LED_GREEN PIN_LED2 -#define LED_CONN PIN_GREEN - #define LED_STATE_ON 0 // State when LED is lit /* @@ -163,7 +161,6 @@ External serial flash WP25R1635FZUIL0 // Controls power for all peripherals (eink + GPS + LoRa + Sensor) #define PIN_POWER_EN (0 + 12) -// #define PIN_POWER_EN1 (0 + 13) #define PIN_SPI1_MISO \ (32 + 7) // FIXME not really needed, but for now the SPI code requires something to be defined, pick an used GPIO diff --git a/variants/rp2040/rak11310/variant.h b/variants/rp2040/rak11310/variant.h index 36c77d209..4d2b9ca3a 100644 --- a/variants/rp2040/rak11310/variant.h +++ b/variants/rp2040/rak11310/variant.h @@ -10,7 +10,6 @@ #define I2C_SDA1 2 #define I2C_SCL1 3 -#define LED_CONN PIN_LED2 #define LED_PIN PIN_LED #define ledOff(pin) pinMode(pin, INPUT) From dbded86dcb6647b06e6a19a2a9656472f1488989 Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Thu, 29 Jan 2026 12:51:48 -0600 Subject: [PATCH 07/14] More variant.h cleanup. LED_NOTIFICATION, remove dead code, etc (#9477) --- src/Power.cpp | 3 +++ src/configuration.h | 6 +++--- src/main.cpp | 6 +++--- src/mesh/NodeDB.cpp | 21 +++---------------- .../9m2ibr_aprs_lora_tracker/platformio.ini | 3 +++ .../diy/9m2ibr_aprs_lora_tracker/variant.cpp | 8 +++++++ .../esp32s3/hackaday-communicator/variant.h | 3 ++- variants/esp32s3/rak3312/variant.h | 2 +- variants/esp32s3/rak_wismesh_tap_v2/variant.h | 2 +- .../nrf52840/ELECROW-ThinkNode-M1/variant.cpp | 7 ------- .../nrf52840/ELECROW-ThinkNode-M1/variant.h | 7 +------ .../nrf52840/ELECROW-ThinkNode-M3/variant.h | 2 +- .../nrf52840/ELECROW-ThinkNode-M4/variant.cpp | 3 --- .../nrf52840/ELECROW-ThinkNode-M4/variant.h | 2 +- .../nrf52840/ELECROW-ThinkNode-M6/variant.h | 2 +- .../MakePython_nRF52840_eink/variant.cpp | 3 --- .../MakePython_nRF52840_eink/variant.h | 4 +--- .../MakePython_nRF52840_oled/variant.cpp | 3 --- .../MakePython_nRF52840_oled/variant.h | 4 +--- variants/nrf52840/feather_diy/variant.h | 2 +- .../gat562_mesh_trial_tracker/variant.cpp | 3 --- .../gat562_mesh_trial_tracker/variant.h | 4 ++-- variants/nrf52840/meshtiny/variant.cpp | 6 +++--- variants/nrf52840/meshtiny/variant.h | 3 +-- variants/nrf52840/monteops_hw1/variant.cpp | 3 --- variants/nrf52840/monteops_hw1/variant.h | 4 ++-- variants/nrf52840/muzi_base/variant.cpp | 4 ++-- variants/nrf52840/muzi_base/variant.h | 4 ++-- variants/nrf52840/nano-g2-ultra/variant.h | 9 -------- variants/nrf52840/nrf52.ini | 2 +- variants/nrf52840/r1-neo/variant.cpp | 3 --- variants/nrf52840/r1-neo/variant.h | 4 ++-- variants/nrf52840/rak2560/variant.cpp | 3 --- variants/nrf52840/rak2560/variant.h | 4 ++-- variants/nrf52840/rak3401_1watt/variant.cpp | 3 --- variants/nrf52840/rak3401_1watt/variant.h | 4 ++-- variants/nrf52840/rak4631/variant.cpp | 3 --- variants/nrf52840/rak4631/variant.h | 4 ++-- variants/nrf52840/rak4631_epaper/variant.cpp | 3 --- variants/nrf52840/rak4631_epaper/variant.h | 4 ++-- .../rak4631_epaper_onrxtx/variant.cpp | 3 --- .../nrf52840/rak4631_epaper_onrxtx/variant.h | 4 ++-- variants/nrf52840/rak4631_eth_gw/variant.cpp | 3 --- variants/nrf52840/rak4631_eth_gw/variant.h | 4 ++-- .../rak4631_nomadstar_meteor_pro/variant.cpp | 3 --- .../rak4631_nomadstar_meteor_pro/variant.h | 4 ++-- variants/nrf52840/rak_wismeshtag/variant.cpp | 3 --- variants/nrf52840/rak_wismeshtag/variant.h | 4 ++-- variants/nrf52840/rak_wismeshtap/variant.cpp | 3 --- variants/nrf52840/rak_wismeshtap/variant.h | 4 ++-- variants/nrf52840/seeed_solar_node/variant.h | 1 - .../nrf52840/seeed_wio_tracker_L1/variant.h | 3 +-- .../seeed_wio_tracker_L1_eink/variant.h | 3 +-- .../seeed_xiao_nrf52840_kit/variant.h | 2 -- .../nrf52840/wio-tracker-wm1110/variant.cpp | 3 --- .../nrf52840/wio-tracker-wm1110/variant.h | 5 +---- variants/rp2040/rak11310/pins_arduino.h | 2 +- variants/stm32/milesight_gs301/platformio.ini | 3 +++ variants/stm32/milesight_gs301/variant.cpp | 8 +++++++ 59 files changed, 82 insertions(+), 153 deletions(-) create mode 100644 variants/esp32/diy/9m2ibr_aprs_lora_tracker/variant.cpp create mode 100644 variants/stm32/milesight_gs301/variant.cpp diff --git a/src/Power.cpp b/src/Power.cpp index b2a4ddaaf..b211d760e 100644 --- a/src/Power.cpp +++ b/src/Power.cpp @@ -816,6 +816,9 @@ void Power::shutdown() #endif #ifdef PIN_LED3 ledOff(PIN_LED3); +#endif +#ifdef LED_NOTIFICATION + ledOff(LED_NOTIFICATION); #endif doDeepSleep(DELAY_FOREVER, true, true); #elif defined(ARCH_PORTDUINO) diff --git a/src/configuration.h b/src/configuration.h index f7b438272..0a0525fe5 100644 --- a/src/configuration.h +++ b/src/configuration.h @@ -428,12 +428,12 @@ along with this program. If not, see . #define HAS_RGB_LED #endif -#ifndef LED_STATE_OFF -#define LED_STATE_OFF 0 -#endif #ifndef LED_STATE_ON #define LED_STATE_ON 1 #endif +#ifndef LED_STATE_OFF +#define LED_STATE_OFF (LED_STATE_ON ^ 1) +#endif // default mapping of pins #if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN) diff --git a/src/main.cpp b/src/main.cpp index 68eda2d0d..d9773dfb9 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -354,9 +354,9 @@ void setup() digitalWrite(LED_POWER, LED_STATE_ON); #endif -#ifdef USER_LED - pinMode(USER_LED, OUTPUT); - digitalWrite(USER_LED, HIGH ^ LED_STATE_ON); +#ifdef LED_NOTIFICATION + pinMode(LED_NOTIFICATION, OUTPUT); + digitalWrite(LED_NOTIFICATION, HIGH ^ LED_STATE_ON); #endif #ifdef WIFI_LED diff --git a/src/mesh/NodeDB.cpp b/src/mesh/NodeDB.cpp index 30d1633d5..0ba60f1e2 100644 --- a/src/mesh/NodeDB.cpp +++ b/src/mesh/NodeDB.cpp @@ -824,16 +824,10 @@ void NodeDB::installDefaultModuleConfig() moduleConfig.external_notification.output_ms = 500; moduleConfig.external_notification.nag_timeout = 2; #endif -#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE) || defined(ELECROW_ThinkNode_M3) || \ - defined(ELECROW_ThinkNode_M4) || defined(ELECROW_ThinkNode_M6) - // Default to PIN_LED2 for external notification output (LED color depends on device variant) +#if defined(LED_NOTIFICATION) moduleConfig.external_notification.enabled = true; - moduleConfig.external_notification.output = PIN_LED2; -#if defined(MUZI_BASE) || defined(ELECROW_ThinkNode_M3) - moduleConfig.external_notification.active = false; -#else - moduleConfig.external_notification.active = true; -#endif + moduleConfig.external_notification.output = LED_NOTIFICATION; + moduleConfig.external_notification.active = LED_STATE_ON; moduleConfig.external_notification.alert_message = true; moduleConfig.external_notification.output_ms = 1000; moduleConfig.external_notification.nag_timeout = default_ringtone_nag_secs; @@ -857,15 +851,6 @@ void NodeDB::installDefaultModuleConfig() moduleConfig.external_notification.output_ms = 100; moduleConfig.external_notification.active = true; #endif -#ifdef ELECROW_ThinkNode_M1 - // Default to Elecrow USER_LED (blue) - moduleConfig.external_notification.enabled = true; - moduleConfig.external_notification.output = USER_LED; - moduleConfig.external_notification.active = true; - moduleConfig.external_notification.alert_message = true; - moduleConfig.external_notification.output_ms = 1000; - moduleConfig.external_notification.nag_timeout = 60; -#endif #ifdef T_LORA_PAGER moduleConfig.canned_message.updown1_enabled = true; moduleConfig.canned_message.inputbroker_pin_a = ROTARY_A; diff --git a/variants/esp32/diy/9m2ibr_aprs_lora_tracker/platformio.ini b/variants/esp32/diy/9m2ibr_aprs_lora_tracker/platformio.ini index 809599212..2ddc5a2db 100644 --- a/variants/esp32/diy/9m2ibr_aprs_lora_tracker/platformio.ini +++ b/variants/esp32/diy/9m2ibr_aprs_lora_tracker/platformio.ini @@ -10,3 +10,6 @@ build_flags = -D EBYTE_E22 -D EBYTE_E22_900M30S ; Assume Tx power curve is identical to 900M30S as there is no documentation -I variants/esp32/diy/9m2ibr_aprs_lora_tracker +build_src_filter = + ${esp32_base.build_src_filter} + +<../variants/esp32/diy/9m2ibr_aprs_lora_tracker> \ No newline at end of file diff --git a/variants/esp32/diy/9m2ibr_aprs_lora_tracker/variant.cpp b/variants/esp32/diy/9m2ibr_aprs_lora_tracker/variant.cpp new file mode 100644 index 000000000..ef90d5a54 --- /dev/null +++ b/variants/esp32/diy/9m2ibr_aprs_lora_tracker/variant.cpp @@ -0,0 +1,8 @@ +#include "variant.h" +#include "Arduino.h" + +void earlyInitVariant() +{ + pinMode(USER_LED, OUTPUT); + digitalWrite(USER_LED, HIGH ^ LED_STATE_ON); +} \ No newline at end of file diff --git a/variants/esp32s3/hackaday-communicator/variant.h b/variants/esp32s3/hackaday-communicator/variant.h index 7e048d72c..cca408622 100644 --- a/variants/esp32s3/hackaday-communicator/variant.h +++ b/variants/esp32s3/hackaday-communicator/variant.h @@ -46,4 +46,5 @@ #define SX126X_DIO2_AS_RF_SWITCH #define SX126X_DIO3_TCXO_VOLTAGE 1.8 -// #define LED_PIN 1 \ No newline at end of file +#define LED_NOTIFICATION 1 +#define LED_STATE_ON 0 diff --git a/variants/esp32s3/rak3312/variant.h b/variants/esp32s3/rak3312/variant.h index 4d860e476..6431f1fd0 100644 --- a/variants/esp32s3/rak3312/variant.h +++ b/variants/esp32s3/rak3312/variant.h @@ -22,7 +22,7 @@ #define LED_BLUE 45 #define PIN_LED1 LED_GREEN -#define PIN_LED2 LED_BLUE +#define LED_NOTIFICATION LED_BLUE #define LED_PIN LED_GREEN #define ledOff(pin) pinMode(pin, INPUT) diff --git a/variants/esp32s3/rak_wismesh_tap_v2/variant.h b/variants/esp32s3/rak_wismesh_tap_v2/variant.h index f94b7ca4e..7d263165c 100644 --- a/variants/esp32s3/rak_wismesh_tap_v2/variant.h +++ b/variants/esp32s3/rak_wismesh_tap_v2/variant.h @@ -30,7 +30,7 @@ #define LED_BLUE 45 #define PIN_LED1 LED_GREEN -#define PIN_LED2 LED_BLUE +#define LED_NOTIFICATION LED_BLUE #define LED_PIN LED_GREEN #define ledOff(pin) pinMode(pin, INPUT) diff --git a/variants/nrf52840/ELECROW-ThinkNode-M1/variant.cpp b/variants/nrf52840/ELECROW-ThinkNode-M1/variant.cpp index 1560cde73..04f86e2d4 100644 --- a/variants/nrf52840/ELECROW-ThinkNode-M1/variant.cpp +++ b/variants/nrf52840/ELECROW-ThinkNode-M1/variant.cpp @@ -32,15 +32,8 @@ const uint32_t g_ADigitalPinMap[] = { void initVariant() { - // LED1 & LED2 pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - - pinMode(PIN_LED3, OUTPUT); - ledOff(PIN_LED3); } void variant_shutdown() diff --git a/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h b/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h index a8c7b42b5..e00e56785 100644 --- a/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h +++ b/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h @@ -41,20 +41,15 @@ extern "C" { #define NUM_ANALOG_INPUTS (1) #define NUM_ANALOG_OUTPUTS (0) -#define PIN_LED2 -1 -#define PIN_LED3 -1 - // LED #define PIN_LED1 (32 + 6) // red #define LED_POWER (32 + 4) -#define USER_LED (0 + 13) // green +#define LED_NOTIFICATION (0 + 13) // green // USB_CHECK #define EXT_PWR_DETECT (32 + 3) #define ADC_V (0 + 8) -#define LED_RED PIN_LED3 #define LED_BLUE PIN_LED1 -#define LED_GREEN PIN_LED2 #define LED_STATE_ON 0 // State when LED is lit // LED灯亮时的状态 #define PIN_BUZZER (0 + 6) /* diff --git a/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h b/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h index 955a16a88..197b72cc9 100644 --- a/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h +++ b/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h @@ -54,7 +54,7 @@ extern "C" { #define LED_POWER LED_RED #define LED_CHARGE LED_POWER // Signals the Status LED Module to handle this LED #define LED_GREEN 35 -#define PIN_LED2 LED_GREEN +#define LED_NOTIFICATION LED_GREEN #define LED_BLUE 37 #define LED_PAIRING LED_BLUE // Signals the Status LED Module to handle this LED diff --git a/variants/nrf52840/ELECROW-ThinkNode-M4/variant.cpp b/variants/nrf52840/ELECROW-ThinkNode-M4/variant.cpp index 5c4b6215b..999f326db 100644 --- a/variants/nrf52840/ELECROW-ThinkNode-M4/variant.cpp +++ b/variants/nrf52840/ELECROW-ThinkNode-M4/variant.cpp @@ -32,9 +32,6 @@ const uint32_t g_ADigitalPinMap[] = { void initVariant() { - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - pinMode(LED_PAIRING, OUTPUT); ledOff(LED_PAIRING); diff --git a/variants/nrf52840/ELECROW-ThinkNode-M4/variant.h b/variants/nrf52840/ELECROW-ThinkNode-M4/variant.h index 0d905c2c1..2cfe948e3 100644 --- a/variants/nrf52840/ELECROW-ThinkNode-M4/variant.h +++ b/variants/nrf52840/ELECROW-ThinkNode-M4/variant.h @@ -41,7 +41,7 @@ extern "C" { // LEDs #define LED_BLUE -1 -#define PIN_LED2 (32 + 9) +#define LED_NOTIFICATION (32 + 9) #define LED_PAIRING (13) #define Battery_LED_1 (15) diff --git a/variants/nrf52840/ELECROW-ThinkNode-M6/variant.h b/variants/nrf52840/ELECROW-ThinkNode-M6/variant.h index 2461d73d2..387f4122b 100644 --- a/variants/nrf52840/ELECROW-ThinkNode-M6/variant.h +++ b/variants/nrf52840/ELECROW-ThinkNode-M6/variant.h @@ -43,7 +43,7 @@ extern "C" { #define LED_BLUE -1 #define LED_CHARGE (12) #define LED_PAIRING (7) -#define PIN_LED2 LED_PAIRING +#define LED_NOTIFICATION LED_PAIRING #define LED_STATE_ON HIGH #define LED_STATE_OFF LOW diff --git a/variants/nrf52840/MakePython_nRF52840_eink/variant.cpp b/variants/nrf52840/MakePython_nRF52840_eink/variant.cpp index 8c6bf039c..04cda84ac 100644 --- a/variants/nrf52840/MakePython_nRF52840_eink/variant.cpp +++ b/variants/nrf52840/MakePython_nRF52840_eink/variant.cpp @@ -32,7 +32,4 @@ void initVariant() // LED1 & LED2 pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); } diff --git a/variants/nrf52840/MakePython_nRF52840_eink/variant.h b/variants/nrf52840/MakePython_nRF52840_eink/variant.h index 48256e65f..64cca4916 100644 --- a/variants/nrf52840/MakePython_nRF52840_eink/variant.h +++ b/variants/nrf52840/MakePython_nRF52840_eink/variant.h @@ -27,12 +27,10 @@ extern "C" { // LEDs #define PIN_LED1 (32 + 10) // LED P1.15 -#define PIN_LED2 (-1) // #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 -#define LED_STATE_ON 0 // State when LED is litted +#define LED_STATE_ON 0 // State when LED is lit /* * Buttons diff --git a/variants/nrf52840/MakePython_nRF52840_oled/variant.cpp b/variants/nrf52840/MakePython_nRF52840_oled/variant.cpp index 8c6bf039c..04cda84ac 100644 --- a/variants/nrf52840/MakePython_nRF52840_oled/variant.cpp +++ b/variants/nrf52840/MakePython_nRF52840_oled/variant.cpp @@ -32,7 +32,4 @@ void initVariant() // LED1 & LED2 pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); } diff --git a/variants/nrf52840/MakePython_nRF52840_oled/variant.h b/variants/nrf52840/MakePython_nRF52840_oled/variant.h index 025324037..2f035e7da 100644 --- a/variants/nrf52840/MakePython_nRF52840_oled/variant.h +++ b/variants/nrf52840/MakePython_nRF52840_oled/variant.h @@ -27,12 +27,10 @@ extern "C" { // LEDs #define PIN_LED1 (32 + 10) // LED P1.15 -#define PIN_LED2 (-1) // #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 -#define LED_STATE_ON 0 // State when LED is litted +#define LED_STATE_ON 0 // State when LED is lit /* * Buttons diff --git a/variants/nrf52840/feather_diy/variant.h b/variants/nrf52840/feather_diy/variant.h index a9782a8ee..a816e7867 100644 --- a/variants/nrf52840/feather_diy/variant.h +++ b/variants/nrf52840/feather_diy/variant.h @@ -52,7 +52,7 @@ extern "C" { #define LED_GREEN PIN_LED2 // Actually red #define LED_BLUE PIN_LED1 -#define LED_STATE_ON 1 // State when LED is litted +#define LED_STATE_ON 1 // State when LED is lit #define BUTTON_PIN (32 + 2) // P1.02 7 diff --git a/variants/nrf52840/gat562_mesh_trial_tracker/variant.cpp b/variants/nrf52840/gat562_mesh_trial_tracker/variant.cpp index e84b60b3b..a035fbaf0 100644 --- a/variants/nrf52840/gat562_mesh_trial_tracker/variant.cpp +++ b/variants/nrf52840/gat562_mesh_trial_tracker/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/gat562_mesh_trial_tracker/variant.h b/variants/nrf52840/gat562_mesh_trial_tracker/variant.h index 0e37eeeff..2795a6141 100644 --- a/variants/nrf52840/gat562_mesh_trial_tracker/variant.h +++ b/variants/nrf52840/gat562_mesh_trial_tracker/variant.h @@ -46,10 +46,10 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) +#define LED_BLUE (36) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/meshtiny/variant.cpp b/variants/nrf52840/meshtiny/variant.cpp index 2e8b00e4b..aae3da9f2 100644 --- a/variants/nrf52840/meshtiny/variant.cpp +++ b/variants/nrf52840/meshtiny/variant.cpp @@ -32,12 +32,12 @@ const uint32_t g_ADigitalPinMap[] = { void initVariant() { - // LED1 & LED2 + // LED1 & LED_BLUE pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); + pinMode(LED_BLUE, OUTPUT); + ledOff(LED_BLUE); // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); diff --git a/variants/nrf52840/meshtiny/variant.h b/variants/nrf52840/meshtiny/variant.h index 4a99def7d..4289fef4c 100644 --- a/variants/nrf52840/meshtiny/variant.h +++ b/variants/nrf52840/meshtiny/variant.h @@ -47,10 +47,9 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) +#define LED_BLUE (36) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/monteops_hw1/variant.cpp b/variants/nrf52840/monteops_hw1/variant.cpp index 75cca1dc3..81ae9f482 100644 --- a/variants/nrf52840/monteops_hw1/variant.cpp +++ b/variants/nrf52840/monteops_hw1/variant.cpp @@ -35,7 +35,4 @@ void initVariant() // LED1 & LED2 pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); } diff --git a/variants/nrf52840/monteops_hw1/variant.h b/variants/nrf52840/monteops_hw1/variant.h index 9560d076b..b5411bf04 100644 --- a/variants/nrf52840/monteops_hw1/variant.h +++ b/variants/nrf52840/monteops_hw1/variant.h @@ -50,10 +50,10 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) // Connected to WWAN host LED (if present) +#define LED_BLUE (36) // Connected to WWAN host LED (if present) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/muzi_base/variant.cpp b/variants/nrf52840/muzi_base/variant.cpp index da01de974..e6178a968 100644 --- a/variants/nrf52840/muzi_base/variant.cpp +++ b/variants/nrf52840/muzi_base/variant.cpp @@ -63,8 +63,8 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); digitalWrite(PIN_LED1, HIGH); - pinMode(PIN_LED2, OUTPUT); - digitalWrite(PIN_LED2, HIGH); + pinMode(LED_BLUE, OUTPUT); + digitalWrite(LED_BLUE, HIGH); // Initialize LoRa pins pinMode(SX126X_RESET, OUTPUT); diff --git a/variants/nrf52840/muzi_base/variant.h b/variants/nrf52840/muzi_base/variant.h index 1ac8d9c27..b82382314 100644 --- a/variants/nrf52840/muzi_base/variant.h +++ b/variants/nrf52840/muzi_base/variant.h @@ -43,9 +43,9 @@ extern "C" { // LEDs #define PIN_LED1 (32 + 3) // P1.03, Green -#define PIN_LED2 (32 + 4) // P1.04, Blue +#define LED_BLUE (32 + 4) // P1.04, Blue -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 0 // State when LED is lit // Buttons diff --git a/variants/nrf52840/nano-g2-ultra/variant.h b/variants/nrf52840/nano-g2-ultra/variant.h index 6e7cbdc45..5fa6ed9dd 100644 --- a/variants/nrf52840/nano-g2-ultra/variant.h +++ b/variants/nrf52840/nano-g2-ultra/variant.h @@ -41,15 +41,6 @@ extern "C" { #define NUM_ANALOG_INPUTS (1) #define NUM_ANALOG_OUTPUTS (0) -// LEDs -#define PIN_LED1 (-1) -#define PIN_LED2 (-1) -#define PIN_LED3 (-1) - -#define LED_RED PIN_LED3 -#define LED_BLUE PIN_LED1 -#define LED_GREEN PIN_LED2 - #define LED_STATE_ON 0 // State when LED is lit /* diff --git a/variants/nrf52840/nrf52.ini b/variants/nrf52840/nrf52.ini index a07fefb2f..727d2c741 100644 --- a/variants/nrf52840/nrf52.ini +++ b/variants/nrf52840/nrf52.ini @@ -7,7 +7,7 @@ extends = arduino_base platform_packages = ; our custom Git version until they merge our PR # TODO renovate - platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#c770c8a16a351b55b86e347a3d9d7b74ad0bbf39 + platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#74096746e5f167a2ff22e483d8e79bb1aef00591 ; Don't renovate toolchain-gccarmnoneeabi platformio/toolchain-gccarmnoneeabi@~1.90301.0 diff --git a/variants/nrf52840/r1-neo/variant.cpp b/variants/nrf52840/r1-neo/variant.cpp index d87b88c85..c36e88602 100644 --- a/variants/nrf52840/r1-neo/variant.cpp +++ b/variants/nrf52840/r1-neo/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail // pinMode(PIN_3V3_EN, OUTPUT); // digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/r1-neo/variant.h b/variants/nrf52840/r1-neo/variant.h index acad61a51..1d2bc9bab 100644 --- a/variants/nrf52840/r1-neo/variant.h +++ b/variants/nrf52840/r1-neo/variant.h @@ -45,10 +45,10 @@ extern "C" { // LEDs #define PIN_LED1 (32 + 4) // P1.04 Controls Green LED -#define PIN_LED2 (28) // P0.28 Controls Blue LED +#define LED_BLUE (28) // P0.28 Controls Blue LED #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/rak2560/variant.cpp b/variants/nrf52840/rak2560/variant.cpp index e84b60b3b..a035fbaf0 100644 --- a/variants/nrf52840/rak2560/variant.cpp +++ b/variants/nrf52840/rak2560/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/rak2560/variant.h b/variants/nrf52840/rak2560/variant.h index b6b8f0d6d..0038f295d 100644 --- a/variants/nrf52840/rak2560/variant.h +++ b/variants/nrf52840/rak2560/variant.h @@ -46,10 +46,10 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) +#define LED_BLUE (36) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/rak3401_1watt/variant.cpp b/variants/nrf52840/rak3401_1watt/variant.cpp index e84b60b3b..a035fbaf0 100644 --- a/variants/nrf52840/rak3401_1watt/variant.cpp +++ b/variants/nrf52840/rak3401_1watt/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/rak3401_1watt/variant.h b/variants/nrf52840/rak3401_1watt/variant.h index f98f7c400..8df0faccb 100644 --- a/variants/nrf52840/rak3401_1watt/variant.h +++ b/variants/nrf52840/rak3401_1watt/variant.h @@ -45,10 +45,10 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) +#define LED_BLUE (36) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/rak4631/variant.cpp b/variants/nrf52840/rak4631/variant.cpp index e84b60b3b..a035fbaf0 100644 --- a/variants/nrf52840/rak4631/variant.cpp +++ b/variants/nrf52840/rak4631/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/rak4631/variant.h b/variants/nrf52840/rak4631/variant.h index fd1e7cc4b..edf4205f7 100644 --- a/variants/nrf52840/rak4631/variant.h +++ b/variants/nrf52840/rak4631/variant.h @@ -45,10 +45,10 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) +#define LED_BLUE (36) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/rak4631_epaper/variant.cpp b/variants/nrf52840/rak4631_epaper/variant.cpp index e84b60b3b..a035fbaf0 100644 --- a/variants/nrf52840/rak4631_epaper/variant.cpp +++ b/variants/nrf52840/rak4631_epaper/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/rak4631_epaper/variant.h b/variants/nrf52840/rak4631_epaper/variant.h index 8029baf81..19a2615f9 100644 --- a/variants/nrf52840/rak4631_epaper/variant.h +++ b/variants/nrf52840/rak4631_epaper/variant.h @@ -45,10 +45,10 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) +#define LED_BLUE (36) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/rak4631_epaper_onrxtx/variant.cpp b/variants/nrf52840/rak4631_epaper_onrxtx/variant.cpp index e84b60b3b..a035fbaf0 100644 --- a/variants/nrf52840/rak4631_epaper_onrxtx/variant.cpp +++ b/variants/nrf52840/rak4631_epaper_onrxtx/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/rak4631_epaper_onrxtx/variant.h b/variants/nrf52840/rak4631_epaper_onrxtx/variant.h index 9e57f9503..f1a1c58eb 100644 --- a/variants/nrf52840/rak4631_epaper_onrxtx/variant.h +++ b/variants/nrf52840/rak4631_epaper_onrxtx/variant.h @@ -27,10 +27,10 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) +#define LED_BLUE (36) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/rak4631_eth_gw/variant.cpp b/variants/nrf52840/rak4631_eth_gw/variant.cpp index e84b60b3b..a035fbaf0 100644 --- a/variants/nrf52840/rak4631_eth_gw/variant.cpp +++ b/variants/nrf52840/rak4631_eth_gw/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/rak4631_eth_gw/variant.h b/variants/nrf52840/rak4631_eth_gw/variant.h index 0fcffe5b6..24e0c0cd3 100644 --- a/variants/nrf52840/rak4631_eth_gw/variant.h +++ b/variants/nrf52840/rak4631_eth_gw/variant.h @@ -45,10 +45,10 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) +#define LED_BLUE (36) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.cpp b/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.cpp index e84b60b3b..a035fbaf0 100644 --- a/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.cpp +++ b/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h b/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h index 50c6ab573..655cea6e4 100644 --- a/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h +++ b/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h @@ -45,10 +45,10 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) +#define LED_BLUE (36) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/rak_wismeshtag/variant.cpp b/variants/nrf52840/rak_wismeshtag/variant.cpp index e84b60b3b..a035fbaf0 100644 --- a/variants/nrf52840/rak_wismeshtag/variant.cpp +++ b/variants/nrf52840/rak_wismeshtag/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/rak_wismeshtag/variant.h b/variants/nrf52840/rak_wismeshtag/variant.h index 354772e66..5b20e4d93 100644 --- a/variants/nrf52840/rak_wismeshtag/variant.h +++ b/variants/nrf52840/rak_wismeshtag/variant.h @@ -45,10 +45,10 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) +#define LED_BLUE (36) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/rak_wismeshtap/variant.cpp b/variants/nrf52840/rak_wismeshtap/variant.cpp index 36572b074..73d2fac04 100644 --- a/variants/nrf52840/rak_wismeshtap/variant.cpp +++ b/variants/nrf52840/rak_wismeshtap/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/rak_wismeshtap/variant.h b/variants/nrf52840/rak_wismeshtap/variant.h index 2cd7279f9..a31bc7b15 100644 --- a/variants/nrf52840/rak_wismeshtap/variant.h +++ b/variants/nrf52840/rak_wismeshtap/variant.h @@ -45,10 +45,10 @@ extern "C" { // LEDs #define PIN_LED1 (35) -#define PIN_LED2 (36) +#define LED_BLUE (36) #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 +#define LED_NOTIFICATION LED_BLUE #define LED_STATE_ON 1 // State when LED is litted diff --git a/variants/nrf52840/seeed_solar_node/variant.h b/variants/nrf52840/seeed_solar_node/variant.h index cbc8181a9..69736a9e0 100644 --- a/variants/nrf52840/seeed_solar_node/variant.h +++ b/variants/nrf52840/seeed_solar_node/variant.h @@ -25,7 +25,6 @@ #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 -// #define LED_PIN PIN_LED2 #define LED_STATE_ON 1 // State when LED is litted // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // Button Configuration diff --git a/variants/nrf52840/seeed_wio_tracker_L1/variant.h b/variants/nrf52840/seeed_wio_tracker_L1/variant.h index 2d0ff2020..a1ec2508a 100644 --- a/variants/nrf52840/seeed_wio_tracker_L1/variant.h +++ b/variants/nrf52840/seeed_wio_tracker_L1/variant.h @@ -25,8 +25,7 @@ #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 -// #define LED_PIN PIN_LED2 -#define LED_STATE_ON 1 // State when LED is litted +#define LED_STATE_ON 1 // State when LED is lit // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // Button Configuration // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ diff --git a/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h b/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h index 3dd1ca21b..495c4ace8 100644 --- a/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h +++ b/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h @@ -25,8 +25,7 @@ #define LED_GREEN PIN_LED1 #define LED_BLUE PIN_LED2 -// #define LED_PIN PIN_LED2 -#define LED_STATE_ON 1 // State when LED is litted +#define LED_STATE_ON 1 // State when LED is lit // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // Button Configuration // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ diff --git a/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h b/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h index a9ccb2aae..0d599d313 100644 --- a/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h +++ b/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h @@ -69,8 +69,6 @@ static const uint8_t A5 = PIN_A5; #define PIN_LED2 LED_BLUE #define PIN_LED3 LED_RED -#define USER_LED LED_BLUE - /* * Buttons */ diff --git a/variants/nrf52840/wio-tracker-wm1110/variant.cpp b/variants/nrf52840/wio-tracker-wm1110/variant.cpp index 5a3587982..0d0856773 100644 --- a/variants/nrf52840/wio-tracker-wm1110/variant.cpp +++ b/variants/nrf52840/wio-tracker-wm1110/variant.cpp @@ -36,9 +36,6 @@ void initVariant() pinMode(PIN_LED1, OUTPUT); ledOff(PIN_LED1); - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - // 3V3 Power Rail pinMode(PIN_3V3_EN, OUTPUT); digitalWrite(PIN_3V3_EN, HIGH); diff --git a/variants/nrf52840/wio-tracker-wm1110/variant.h b/variants/nrf52840/wio-tracker-wm1110/variant.h index 145750da5..647bd47d8 100644 --- a/variants/nrf52840/wio-tracker-wm1110/variant.h +++ b/variants/nrf52840/wio-tracker-wm1110/variant.h @@ -51,11 +51,8 @@ extern "C" { #define PIN_WIRE_SDA (0 + 5) // P0.05 #define PIN_WIRE_SCL (0 + 4) // P0.04 -#define PIN_LED1 (0 + 6) // P0.06 -#define PIN_LED2 (PINS_COUNT) // P0.14 - +#define PIN_LED1 (0 + 6) // P0.06 #define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 #define LED_STATE_ON 0 diff --git a/variants/rp2040/rak11310/pins_arduino.h b/variants/rp2040/rak11310/pins_arduino.h index 95ee308bc..56214a947 100644 --- a/variants/rp2040/rak11310/pins_arduino.h +++ b/variants/rp2040/rak11310/pins_arduino.h @@ -25,7 +25,7 @@ static const uint8_t A3 = PIN_A3; // LEDs #define PIN_LED (23u) #define PIN_LED1 PIN_LED -#define PIN_LED2 (24u) +#define LED_NOTIFICATION (24u) #define ADC_RESOLUTION 12 diff --git a/variants/stm32/milesight_gs301/platformio.ini b/variants/stm32/milesight_gs301/platformio.ini index a1d3fb34e..73b9cf7ea 100644 --- a/variants/stm32/milesight_gs301/platformio.ini +++ b/variants/stm32/milesight_gs301/platformio.ini @@ -15,6 +15,9 @@ build_flags = -DMESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR=1 build_unflags = -DDEBUG_MUTE # We have space for debug output until sensor support is added +build_src_filter = + ${stm32_base.build_src_filter} + +<../variants/stm32/milesight_gs301> lib_deps = ${stm32_base.lib_deps} diff --git a/variants/stm32/milesight_gs301/variant.cpp b/variants/stm32/milesight_gs301/variant.cpp new file mode 100644 index 000000000..ef90d5a54 --- /dev/null +++ b/variants/stm32/milesight_gs301/variant.cpp @@ -0,0 +1,8 @@ +#include "variant.h" +#include "Arduino.h" + +void earlyInitVariant() +{ + pinMode(USER_LED, OUTPUT); + digitalWrite(USER_LED, HIGH ^ LED_STATE_ON); +} \ No newline at end of file From eeb7373043f748d67a37ed54a91628413b02c3b3 Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Thu, 29 Jan 2026 13:23:49 -0600 Subject: [PATCH 08/14] Remove errant symbol --- src/mesh/RadioInterface.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/mesh/RadioInterface.cpp b/src/mesh/RadioInterface.cpp index 2a9b4e8f3..bbd766329 100644 --- a/src/mesh/RadioInterface.cpp +++ b/src/mesh/RadioInterface.cpp @@ -27,7 +27,7 @@ #include "platform/portduino/USBHal.h" #endif -#ifdef ARCH_STM32WL> +#ifdef ARCH_STM32WL #include "STM32WLE5JCInterface.h" #endif From 5dd06edd007b870744e4da930d6c953be0e5a538 Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Thu, 29 Jan 2026 13:24:10 -0600 Subject: [PATCH 09/14] Add ledOff if not defined --- src/configuration.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/src/configuration.h b/src/configuration.h index 0a0525fe5..45054e421 100644 --- a/src/configuration.h +++ b/src/configuration.h @@ -435,6 +435,10 @@ along with this program. If not, see . #define LED_STATE_OFF (LED_STATE_ON ^ 1) #endif +#ifndef ledOff +#define ledOff(pin) pinMode(pin, INPUT) +#endif + // default mapping of pins #if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN) #define ALT_BUTTON_PIN PIN_BUTTON2 From 200e79e80065d34a3a63abc8848b242ee559ab3b Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Fri, 30 Jan 2026 11:54:49 -0600 Subject: [PATCH 10/14] You get an RTC, and you get an RTC! (delete HAS_RTC as it wasn't actually doing much) (#9493) --- src/configuration.h | 3 --- src/gps/RTC.cpp | 3 --- src/platform/esp32/architecture.h | 3 --- src/platform/portduino/architecture.h | 3 --- variants/esp32/m5stack_coreink/variant.h | 1 - variants/esp32s3/t-watch-s3/variant.h | 1 - variants/esp32s3/tbeam-s3-core/variant.h | 1 - variants/esp32s3/tlora-pager/variant.h | 1 - variants/nrf52840/gat562_mesh_trial_tracker/variant.h | 2 -- variants/nrf52840/heltec_mesh_node_t114/variant.h | 1 - variants/nrf52840/monteops_hw1/variant.h | 2 -- variants/nrf52840/muzi_base/variant.h | 1 - variants/nrf52840/nano-g2-ultra/variant.h | 1 - variants/nrf52840/r1-neo/variant.h | 2 -- variants/nrf52840/rak2560/variant.h | 2 -- variants/nrf52840/rak3401_1watt/variant.h | 2 -- variants/nrf52840/rak4631/variant.h | 2 -- variants/nrf52840/rak4631_epaper/variant.h | 2 -- variants/nrf52840/rak4631_epaper_onrxtx/variant.h | 2 -- variants/nrf52840/rak4631_eth_gw/variant.h | 2 -- variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h | 2 -- variants/nrf52840/rak_wismeshtap/variant.h | 2 -- variants/nrf52840/t-echo/variant.h | 1 - 23 files changed, 42 deletions(-) diff --git a/src/configuration.h b/src/configuration.h index 45054e421..66fa4492d 100644 --- a/src/configuration.h +++ b/src/configuration.h @@ -390,9 +390,6 @@ along with this program. If not, see . #ifndef HAS_RADIO #define HAS_RADIO 0 #endif -#ifndef HAS_RTC -#define HAS_RTC 0 -#endif #ifndef HAS_CPU_SHUTDOWN #define HAS_CPU_SHUTDOWN 0 #endif diff --git a/src/gps/RTC.cpp b/src/gps/RTC.cpp index b13406e96..3bca6f6ec 100644 --- a/src/gps/RTC.cpp +++ b/src/gps/RTC.cpp @@ -276,10 +276,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd settimeofday(tv, NULL); #endif -#if HAS_RTC readFromRTC(); -#endif - return RTCSetResultSuccess; } else { return RTCSetResultNotSet; // RTC was already set with a higher quality time diff --git a/src/platform/esp32/architecture.h b/src/platform/esp32/architecture.h index f34f1fc65..7aee45f81 100644 --- a/src/platform/esp32/architecture.h +++ b/src/platform/esp32/architecture.h @@ -33,9 +33,6 @@ #ifndef HAS_RADIO #define HAS_RADIO 1 #endif -#ifndef HAS_RTC -#define HAS_RTC 1 -#endif #ifndef HAS_CPU_SHUTDOWN #define HAS_CPU_SHUTDOWN 1 #endif diff --git a/src/platform/portduino/architecture.h b/src/platform/portduino/architecture.h index 9ee8ad366..b1698a4eb 100644 --- a/src/platform/portduino/architecture.h +++ b/src/platform/portduino/architecture.h @@ -17,9 +17,6 @@ #ifndef HAS_RADIO #define HAS_RADIO 1 #endif -#ifndef HAS_RTC -#define HAS_RTC 1 -#endif #ifndef HAS_TELEMETRY #define HAS_TELEMETRY 1 #endif diff --git a/variants/esp32/m5stack_coreink/variant.h b/variants/esp32/m5stack_coreink/variant.h index b1708352b..9bf45f2ff 100644 --- a/variants/esp32/m5stack_coreink/variant.h +++ b/variants/esp32/m5stack_coreink/variant.h @@ -15,7 +15,6 @@ // PCF8563 RTC Module #define PCF8563_RTC 0x51 -#define HAS_RTC 1 // Wheel // Down 37 diff --git a/variants/esp32s3/t-watch-s3/variant.h b/variants/esp32s3/t-watch-s3/variant.h index 216dda589..df275c31d 100644 --- a/variants/esp32s3/t-watch-s3/variant.h +++ b/variants/esp32s3/t-watch-s3/variant.h @@ -45,7 +45,6 @@ // PCF8563 RTC Module #define PCF8563_RTC 0x51 -#define HAS_RTC 1 #define I2C_SDA 10 // For QMC6310 sensors and screens #define I2C_SCL 11 // For QMC6310 sensors and screens diff --git a/variants/esp32s3/tbeam-s3-core/variant.h b/variants/esp32s3/tbeam-s3-core/variant.h index 1f900fcae..9ce4aade9 100644 --- a/variants/esp32s3/tbeam-s3-core/variant.h +++ b/variants/esp32s3/tbeam-s3-core/variant.h @@ -55,7 +55,6 @@ // PCF8563 RTC Module #define PCF8563_RTC 0x51 -#define HAS_RTC 1 // Specify the PMU as Wire1. In the t-beam-s3 core, PCF8563 and PMU share the bus #define PMU_USE_WIRE1 diff --git a/variants/esp32s3/tlora-pager/variant.h b/variants/esp32s3/tlora-pager/variant.h index e2d4029be..d97f864c3 100644 --- a/variants/esp32s3/tlora-pager/variant.h +++ b/variants/esp32s3/tlora-pager/variant.h @@ -40,7 +40,6 @@ // PCF85063 RTC Module #define PCF85063_RTC 0x51 -#define HAS_RTC 1 // Rotary #define ROTARY_A (40) diff --git a/variants/nrf52840/gat562_mesh_trial_tracker/variant.h b/variants/nrf52840/gat562_mesh_trial_tracker/variant.h index 2795a6141..b5632a7fb 100644 --- a/variants/nrf52840/gat562_mesh_trial_tracker/variant.h +++ b/variants/nrf52840/gat562_mesh_trial_tracker/variant.h @@ -259,8 +259,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG #define VBAT_AR_INTERNAL AR_INTERNAL_3_0 #define ADC_MULTIPLIER 1.73 -// #define HAS_RTC 1 - // #define HAS_ETHERNET 1 // #define RAK_4631 1 diff --git a/variants/nrf52840/heltec_mesh_node_t114/variant.h b/variants/nrf52840/heltec_mesh_node_t114/variant.h index fe825089e..e7385c4bb 100644 --- a/variants/nrf52840/heltec_mesh_node_t114/variant.h +++ b/variants/nrf52840/heltec_mesh_node_t114/variant.h @@ -223,7 +223,6 @@ No longer populated on PCB // VBAT=4.04V #define BATTERY_LPCOMP_THRESHOLD NRF_LPCOMP_REF_SUPPLY_2_8 -#define HAS_RTC 0 #ifdef __cplusplus } #endif diff --git a/variants/nrf52840/monteops_hw1/variant.h b/variants/nrf52840/monteops_hw1/variant.h index b5411bf04..a7fa7125b 100644 --- a/variants/nrf52840/monteops_hw1/variant.h +++ b/variants/nrf52840/monteops_hw1/variant.h @@ -208,8 +208,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG #define VBAT_AR_INTERNAL AR_INTERNAL_3_0 #define ADC_MULTIPLIER (1.73F) -// #define HAS_RTC 1 - #define HAS_ETHERNET 1 #define PIN_ETHERNET_RESET 21 diff --git a/variants/nrf52840/muzi_base/variant.h b/variants/nrf52840/muzi_base/variant.h index b82382314..0cbd0e3ef 100644 --- a/variants/nrf52840/muzi_base/variant.h +++ b/variants/nrf52840/muzi_base/variant.h @@ -38,7 +38,6 @@ extern "C" { #define COMPASS_ORIENTATION meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270 #define HAS_ICM20948 // forces the i2c address to be seen as this sensor -#define HAS_RTC 1 #define RX8130CE_RTC 0x32 // LEDs diff --git a/variants/nrf52840/nano-g2-ultra/variant.h b/variants/nrf52840/nano-g2-ultra/variant.h index 5fa6ed9dd..631af72d8 100644 --- a/variants/nrf52840/nano-g2-ultra/variant.h +++ b/variants/nrf52840/nano-g2-ultra/variant.h @@ -129,7 +129,6 @@ External serial flash W25Q16JV_IQ // PCF8563 RTC Module #define PIN_RTC_INT (0 + 14) // Interrupt from the PCF8563 RTC #define PCF8563_RTC 0x51 -#define HAS_RTC 1 /* * SPI Interfaces diff --git a/variants/nrf52840/r1-neo/variant.h b/variants/nrf52840/r1-neo/variant.h index 1d2bc9bab..42d44d673 100644 --- a/variants/nrf52840/r1-neo/variant.h +++ b/variants/nrf52840/r1-neo/variant.h @@ -132,8 +132,6 @@ static const uint8_t SCK = PIN_SPI_SCK; #define ADC_MULTIPLIER 1.667 #define OCV_ARRAY 4120, 4020, 4000, 3940, 3870, 3820, 3750, 3630, 3550, 3450, 3100 -#define HAS_RTC 1 - #define RX8130CE_RTC 0x32 #ifdef __cplusplus diff --git a/variants/nrf52840/rak2560/variant.h b/variants/nrf52840/rak2560/variant.h index 0038f295d..acd1ae60e 100644 --- a/variants/nrf52840/rak2560/variant.h +++ b/variants/nrf52840/rak2560/variant.h @@ -244,8 +244,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG #define VBAT_AR_INTERNAL AR_INTERNAL_3_0 #define ADC_MULTIPLIER 1.73 -#define HAS_RTC 1 - #define RAK_4631 1 #define HALF_UART_PIN PIN_SERIAL1_RX diff --git a/variants/nrf52840/rak3401_1watt/variant.h b/variants/nrf52840/rak3401_1watt/variant.h index 8df0faccb..80b09cf69 100644 --- a/variants/nrf52840/rak3401_1watt/variant.h +++ b/variants/nrf52840/rak3401_1watt/variant.h @@ -208,8 +208,6 @@ static const uint8_t SCK = PIN_SPI_SCK; #define VBAT_AR_INTERNAL AR_INTERNAL_3_0 #define ADC_MULTIPLIER 1.73 -#define HAS_RTC 1 - #define RAK_4631 1 #ifdef __cplusplus diff --git a/variants/nrf52840/rak4631/variant.h b/variants/nrf52840/rak4631/variant.h index 37ae0f12a..6a6b32f27 100644 --- a/variants/nrf52840/rak4631/variant.h +++ b/variants/nrf52840/rak4631/variant.h @@ -280,8 +280,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG // VDD=3.3V AIN3=6/8*VDD=2.47V VBAT=1.66*AIN3=4.1V #define BATTERY_LPCOMP_THRESHOLD NRF_LPCOMP_REF_SUPPLY_11_16 -#define HAS_RTC 1 - #define HAS_ETHERNET 1 #define RAK_4631 1 diff --git a/variants/nrf52840/rak4631_epaper/variant.h b/variants/nrf52840/rak4631_epaper/variant.h index 19a2615f9..82c26af7b 100644 --- a/variants/nrf52840/rak4631_epaper/variant.h +++ b/variants/nrf52840/rak4631_epaper/variant.h @@ -217,8 +217,6 @@ static const uint8_t SCK = PIN_SPI_SCK; #define VBAT_AR_INTERNAL AR_INTERNAL_3_0 #define ADC_MULTIPLIER 1.73 -#define HAS_RTC 1 - #define RAK_4631 1 #ifdef __cplusplus diff --git a/variants/nrf52840/rak4631_epaper_onrxtx/variant.h b/variants/nrf52840/rak4631_epaper_onrxtx/variant.h index f1a1c58eb..2d34ab84c 100644 --- a/variants/nrf52840/rak4631_epaper_onrxtx/variant.h +++ b/variants/nrf52840/rak4631_epaper_onrxtx/variant.h @@ -192,8 +192,6 @@ static const uint8_t SCK = PIN_SPI_SCK; // #define VBAT_AR_INTERNAL AR_INTERNAL_3_0 // #define ADC_MULTIPLIER 1.73 -// #define HAS_RTC 1 - #ifdef __cplusplus } #endif diff --git a/variants/nrf52840/rak4631_eth_gw/variant.h b/variants/nrf52840/rak4631_eth_gw/variant.h index 24e0c0cd3..eb1d558ea 100644 --- a/variants/nrf52840/rak4631_eth_gw/variant.h +++ b/variants/nrf52840/rak4631_eth_gw/variant.h @@ -249,8 +249,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG #define VBAT_AR_INTERNAL AR_INTERNAL_3_0 #define ADC_MULTIPLIER 1.73 -#define HAS_RTC 1 - #define HAS_ETHERNET 1 #define RAK_4631 1 diff --git a/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h b/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h index 655cea6e4..aea497305 100644 --- a/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h +++ b/variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h @@ -244,8 +244,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG #define VBAT_AR_INTERNAL AR_INTERNAL_3_0 #define ADC_MULTIPLIER 1.73 -#define HAS_RTC 0 - #define HAS_ETHERNET 0 #define RAK_4631 1 diff --git a/variants/nrf52840/rak_wismeshtap/variant.h b/variants/nrf52840/rak_wismeshtap/variant.h index a31bc7b15..358117cd5 100644 --- a/variants/nrf52840/rak_wismeshtap/variant.h +++ b/variants/nrf52840/rak_wismeshtap/variant.h @@ -266,8 +266,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG #define VBAT_AR_INTERNAL AR_INTERNAL_3_0 #define ADC_MULTIPLIER (1.73F) -#define HAS_RTC 1 - #define RAK_4631 1 #define AQ_SET_PIN 10 diff --git a/variants/nrf52840/t-echo/variant.h b/variants/nrf52840/t-echo/variant.h index f6f650315..f4644c6de 100644 --- a/variants/nrf52840/t-echo/variant.h +++ b/variants/nrf52840/t-echo/variant.h @@ -188,7 +188,6 @@ External serial flash WP25R1635FZUIL0 // PCF8563 RTC Module #define PIN_RTC_INT (0 + 16) // Interrupt from the PCF8563 RTC #define PCF8563_RTC 0x51 -#define HAS_RTC 1 /* * SPI Interfaces From caae6bc5970a8fe30c2802c58565c6cefea63566 Mon Sep 17 00:00:00 2001 From: scobert969 Date: Fri, 30 Jan 2026 10:31:26 -0800 Subject: [PATCH 11/14] Change canned message recipient's previous page to send page (#9227) * Change canned message recipient's previous page to send page * Set previousPage for new menu pages Set nextPage in back MenuPages to previousPage Removed back MenuAction --------- Co-authored-by: zeropt Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> --- .../InkHUD/Applets/System/Menu/MenuAction.h | 1 - .../InkHUD/Applets/System/Menu/MenuApplet.cpp | 80 +++++++++++-------- 2 files changed, 46 insertions(+), 35 deletions(-) diff --git a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuAction.h b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuAction.h index 74ad5c85f..7cfb33e9d 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuAction.h +++ b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuAction.h @@ -22,7 +22,6 @@ enum MenuAction { STORE_CANNEDMESSAGE_SELECTION, SEND_CANNEDMESSAGE, SHUTDOWN, - BACK, NEXT_TILE, TOGGLE_BACKLIGHT, TOGGLE_GPS, diff --git a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp index 93d2c6b83..b69e31e9a 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp @@ -325,10 +325,6 @@ void InkHUD::MenuApplet::execute(MenuItem item) } break; - case BACK: - showPage(item.nextPage); - return; - case NEXT_TILE: inkhud->nextTile(); // Unselect menu item after tile change @@ -868,6 +864,7 @@ void InkHUD::MenuApplet::showPage(MenuPage page) switch (page) { case ROOT: + previousPage = MenuPage::EXIT; // Optional: next applet if (settings->optionalMenuItems.nextTile && settings->userTiles.count > 1) items.push_back(MenuItem("Next Tile", MenuAction::NEXT_TILE, MenuPage::ROOT)); // Only if multiple applets shown @@ -878,7 +875,6 @@ void InkHUD::MenuApplet::showPage(MenuPage page) items.push_back(MenuItem("Node Config", MenuPage::NODE_CONFIG)); items.push_back(MenuItem("Save & Shut Down", MenuAction::SHUTDOWN)); items.push_back(MenuItem("Exit", MenuPage::EXIT)); - previousPage = MenuPage::EXIT; break; case SEND: @@ -888,11 +884,12 @@ void InkHUD::MenuApplet::showPage(MenuPage page) case CANNEDMESSAGE_RECIPIENT: populateRecipientPage(); - previousPage = MenuPage::OPTIONS; + previousPage = MenuPage::SEND; break; case OPTIONS: - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::ROOT)); + previousPage = MenuPage::ROOT; + items.push_back(MenuItem("Back", previousPage)); // Optional: backlight if (settings->optionalMenuItems.backlight) items.push_back(MenuItem(backlight->isLatched() ? "Backlight Off" : "Keep Backlight On", // Label @@ -916,31 +913,32 @@ void InkHUD::MenuApplet::showPage(MenuPage page) invertedColors = (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_INVERTED); items.push_back(MenuItem("Invert Color", MenuAction::TOGGLE_INVERT_COLOR, MenuPage::OPTIONS, &invertedColors)); items.push_back(MenuItem("Exit", MenuPage::EXIT)); - previousPage = MenuPage::ROOT; break; case APPLETS: - populateAppletPage(); // must be first - items.insert(items.begin(), MenuItem("Back", MenuAction::BACK, MenuPage::OPTIONS)); - items.push_back(MenuItem("Exit", MenuPage::EXIT)); previousPage = MenuPage::OPTIONS; + populateAppletPage(); // must be first + items.insert(items.begin(), MenuItem("Back", previousPage)); + items.push_back(MenuItem("Exit", MenuPage::EXIT)); break; case AUTOSHOW: - populateAutoshowPage(); // must be first - items.insert(items.begin(), MenuItem("Back", MenuAction::BACK, MenuPage::OPTIONS)); - items.push_back(MenuItem("Exit", MenuPage::EXIT)); previousPage = MenuPage::OPTIONS; + populateAutoshowPage(); // must be first + items.insert(items.begin(), MenuItem("Back", previousPage)); + items.push_back(MenuItem("Exit", MenuPage::EXIT)); break; case RECENTS: + previousPage = MenuPage::OPTIONS; populateRecentsPage(); // builds only the options - items.insert(items.begin(), MenuItem("Back", MenuAction::BACK, MenuPage::OPTIONS)); + items.insert(items.begin(), MenuItem("Back", previousPage)); items.push_back(MenuItem("Exit", MenuPage::EXIT)); break; case NODE_CONFIG: - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::ROOT)); + previousPage = MenuPage::ROOT; + items.push_back(MenuItem("Back", previousPage)); // Radio Config Section items.push_back(MenuItem::Header("Radio Config")); items.push_back(MenuItem("LoRa", MenuPage::NODE_CONFIG_LORA)); @@ -965,8 +963,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) break; case NODE_CONFIG_DEVICE: { - - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG)); + previousPage = MenuPage::NODE_CONFIG; + items.push_back(MenuItem("Back", previousPage)); const char *role = DisplayFormatters::getDeviceRole(config.device.role); nodeConfigLabels.emplace_back("Role: " + std::string(role)); @@ -981,7 +979,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case NODE_CONFIG_POSITION: { - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG)); + previousPage = MenuPage::NODE_CONFIG; + items.push_back(MenuItem("Back", previousPage)); #if !MESHTASTIC_EXCLUDE_GPS && HAS_GPS const auto mode = config.position.gps_mode; if (mode == meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT) { @@ -996,7 +995,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case NODE_CONFIG_POWER: { - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG)); + previousPage = MenuPage::NODE_CONFIG; + items.push_back(MenuItem("Back", previousPage)); #if defined(ARCH_ESP32) items.push_back(MenuItem("Powersave", MenuAction::TOGGLE_POWER_SAVE, MenuPage::EXIT, &config.power.is_power_saving)); #endif @@ -1029,7 +1029,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case NODE_CONFIG_POWER_ADC_CAL: { - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG_POWER)); + previousPage = MenuPage::NODE_CONFIG_POWER; + items.push_back(MenuItem("Back", previousPage)); // Instruction text (header-style, non-selectable) items.push_back(MenuItem::Header("Run on full charge Only")); @@ -1042,7 +1043,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case NODE_CONFIG_NETWORK: { - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG)); + previousPage = MenuPage::NODE_CONFIG; + items.push_back(MenuItem("Back", previousPage)); const char *wifiLabel = config.network.wifi_enabled ? "WiFi: On" : "WiFi: Off"; @@ -1099,7 +1101,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case NODE_CONFIG_DISPLAY: { - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG)); + previousPage = MenuPage::NODE_CONFIG; + items.push_back(MenuItem("Back", previousPage)); items.push_back(MenuItem("12-Hour Clock", MenuAction::TOGGLE_12H_CLOCK, MenuPage::NODE_CONFIG_DISPLAY, &config.display.use_12h_clock)); @@ -1114,7 +1117,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case NODE_CONFIG_BLUETOOTH: { - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG)); + previousPage = MenuPage::NODE_CONFIG; + items.push_back(MenuItem("Back", previousPage)); const char *btLabel = config.bluetooth.enabled ? "Bluetooth: On" : "Bluetooth: Off"; items.push_back(MenuItem(btLabel, MenuAction::TOGGLE_BLUETOOTH, MenuPage::EXIT)); @@ -1127,8 +1131,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case NODE_CONFIG_LORA: { - - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG)); + previousPage = MenuPage::NODE_CONFIG; + items.push_back(MenuItem("Back", previousPage)); const char *region = myRegion ? myRegion->name : "Unset"; nodeConfigLabels.emplace_back("Region: " + std::string(region)); @@ -1150,7 +1154,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case NODE_CONFIG_CHANNELS: { - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG)); + previousPage = MenuPage::NODE_CONFIG; + items.push_back(MenuItem("Back", previousPage)); for (uint8_t i = 0; i < MAX_NUM_CHANNELS; i++) { meshtastic_Channel &ch = channels.getByIndex(i); @@ -1181,7 +1186,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case NODE_CONFIG_CHANNEL_DETAIL: { - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG_CHANNELS)); + previousPage = MenuPage::NODE_CONFIG_CHANNELS; + items.push_back(MenuItem("Back", previousPage)); meshtastic_Channel &ch = channels.getByIndex(selectedChannelIndex); @@ -1226,7 +1232,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case NODE_CONFIG_CHANNEL_PRECISION: { - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG_CHANNEL_DETAIL)); + previousPage = MenuPage::NODE_CONFIG_CHANNEL_DETAIL; + items.push_back(MenuItem("Back", previousPage)); meshtastic_Channel &ch = channels.getByIndex(selectedChannelIndex); if (!ch.settings.has_module_settings || ch.settings.module_settings.position_precision == 0) { items.push_back(MenuItem("Position is Off", MenuPage::NODE_CONFIG_CHANNEL_DETAIL)); @@ -1247,7 +1254,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case NODE_CONFIG_DEVICE_ROLE: { - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG_DEVICE)); + previousPage = MenuPage::NODE_CONFIG_DEVICE; + items.push_back(MenuItem("Back", previousPage)); items.push_back(MenuItem("Client", MenuAction::SET_ROLE_CLIENT, MenuPage::EXIT)); items.push_back(MenuItem("Client Mute", MenuAction::SET_ROLE_CLIENT_MUTE, MenuPage::EXIT)); items.push_back(MenuItem("Router", MenuAction::SET_ROLE_ROUTER, MenuPage::EXIT)); @@ -1257,7 +1265,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } case TIMEZONE: - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG_DEVICE)); + previousPage = MenuPage::NODE_CONFIG_DEVICE; + items.push_back(MenuItem("Back", previousPage)); items.push_back(MenuItem("US/Hawaii", SET_TZ_US_HAWAII, MenuPage::NODE_CONFIG_DEVICE)); items.push_back(MenuItem("US/Alaska", SET_TZ_US_ALASKA, MenuPage::NODE_CONFIG_DEVICE)); items.push_back(MenuItem("US/Pacific", SET_TZ_US_PACIFIC, MenuPage::NODE_CONFIG_DEVICE)); @@ -1279,7 +1288,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) break; case REGION: - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG_LORA)); + previousPage = MenuPage::NODE_CONFIG_LORA; + items.push_back(MenuItem("Back", previousPage)); items.push_back(MenuItem("US", MenuAction::SET_REGION_US, MenuPage::EXIT)); items.push_back(MenuItem("EU 868", MenuAction::SET_REGION_EU_868, MenuPage::EXIT)); items.push_back(MenuItem("EU 433", MenuAction::SET_REGION_EU_433, MenuPage::EXIT)); @@ -1310,7 +1320,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) break; case NODE_CONFIG_PRESET: { - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG_LORA)); + previousPage = MenuPage::NODE_CONFIG_LORA; + items.push_back(MenuItem("Back", previousPage)); items.push_back(MenuItem("Long Moderate", MenuAction::SET_PRESET_LONG_MODERATE, MenuPage::EXIT)); items.push_back(MenuItem("Long Fast", MenuAction::SET_PRESET_LONG_FAST, MenuPage::EXIT)); items.push_back(MenuItem("Medium Slow", MenuAction::SET_PRESET_MEDIUM_SLOW, MenuPage::EXIT)); @@ -1323,7 +1334,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page) } // Administration Section case NODE_CONFIG_ADMIN_RESET: - items.push_back(MenuItem("Back", MenuAction::BACK, MenuPage::NODE_CONFIG)); + previousPage = MenuPage::NODE_CONFIG; + items.push_back(MenuItem("Back", previousPage)); items.push_back(MenuItem("Reset All", MenuAction::RESET_NODEDB_ALL, MenuPage::EXIT)); items.push_back(MenuItem("Keep Favorites Only", MenuAction::RESET_NODEDB_KEEP_FAVORITES, MenuPage::EXIT)); items.push_back(MenuItem("Exit", MenuPage::EXIT)); From 7bbfe99fbef6d2f9302462662518295fe151a9fd Mon Sep 17 00:00:00 2001 From: scobert969 Date: Fri, 30 Jan 2026 10:35:10 -0800 Subject: [PATCH 12/14] Add on-screen keyboard to InkHUD (#9445) * Added keyboard option to menu. Shows a keyboard layout but does not type. * Keyboard types into text box and wraps. * send FreeText messages from the send submenu - renamed `KEYBOARD` action to `FREE_TEXT` and moved its menu location to the send submenu - opening the FreeText applet from the menu keeps the menu open and disabled the timeout - the FreeText applet writes to inkhud->freetext - the sending a canned message checks inkhud->freetext and if it isn't empty, sends and clears the inkhud->freetext * Text scrolls along with input * handle free text message completion as an event implements `handleFreeText` and `OnFreeText()` for system applets to interface with the FreeText Applet The FreeText Applet generates an `OnFreeText` event when completing a message which is handled by the first system applet with the `handleFreeText` flag set to true. The Menu Applet now handles this event. * call `onFreeText` whenever the FreeText Applet exits allows the menu to consistently restart its auto-close timeout * Add text cursor * Change UI to remove the header and make text box longer Keyboard displays captial letters for legibility Keyboard types captial letters with long press * center FreeText keys and draw symbolic buttons Move input field and keyboard drawing to their own functions: - `drawInputField()` - `drawKeyboard()` Store the keys in a 1-dimensional array Implement a matching array, `keyWidths`, to set key widths relative to the font size * Add character limit and counter * Fix softlock when hitting character limit * Move text box as its own menu page * rework FreeTextApplet into KeyboardApplet - The Keyboard Applet renders an on-screen keyboard at the lower portion of the screen. - Calling `inkhud->openKeyboard()` sends all the user applets to the background and resizes the first system applet with `handleFreeText` set to True to fit above the on-screen keyboard - `inkhud->closeKeyboard()` reverses this layout change * Fix input box rendering and add character limit to menu free text * remove FREE_TEXT menu page and use the FREE_TEXT menu action solely * force update when changing the free text message * reorganize KeyboardApplet - add comments after each row of `key[]` and `keyWidths[]` to preserve formatting - The selected key is now set using the key index directly - rowWidths are pre-calculated in the KeyboardApplet constructor - removed `drawKeyboard()` and implemented `drawKeyLabel()` * implement `Renderer::clearTile()` to clear the region below a tile * add parameter to forceUpdate() for re-rendering the full screen setting the `all` parameter to true in `inkhud->forceUpdate()` now causes the full screen buffer to clear an re-render. This is helpful for when sending applets to the background and the UI needs a clean canvas. System Applets can now set the `alwaysRender` flag true which causes it to re-render on every screen update. This is set to true in the Battery Icon Applet. * clean up tile clearing loops * implement dirty rendering to let applets draw over their previous render - `Applet::requestUpdate()` now has an optional flag to keep the old canvas - If honored, the renderer calls `render(true)` which runs `onDirtyRender()` instead of `onRender()` for said applet - The renderer will not call a dirty render if the full screen is getting re-rendered * simplify arithmetic in clearTile for better understanding * combine Applet::onRender() and Applet::onDirtyRender() into Applet::onRender(bool full) - add new `full` parameter to onRender() in every applet. This parameter can be ignored by most applets. - `Applet::requestUpdate()` has an optional flag that requests a full render by default * implement tile and partial rendering in KeyboardApplet * add comment for drawKeyLabel() * improve clarity of byte operations in clearTile() * remove typo and commented code * fix inaccurate comments * add null check to openKeyboard() and closeKeyboard() --------- Co-authored-by: zeropt Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> --- src/graphics/niche/InkHUD/Applet.cpp | 13 +- src/graphics/niche/InkHUD/Applet.h | 14 +- .../InkHUD/Applets/Bases/Map/MapApplet.cpp | 2 +- .../InkHUD/Applets/Bases/Map/MapApplet.h | 2 +- .../Applets/Bases/NodeList/NodeListApplet.cpp | 2 +- .../Applets/Bases/NodeList/NodeListApplet.h | 2 +- .../BasicExample/BasicExampleApplet.cpp | 2 +- .../BasicExample/BasicExampleApplet.h | 2 +- .../NewMsgExample/NewMsgExampleApplet.cpp | 2 +- .../NewMsgExample/NewMsgExampleApplet.h | 2 +- .../System/AlignStick/AlignStickApplet.cpp | 10 +- .../System/AlignStick/AlignStickApplet.h | 2 +- .../System/BatteryIcon/BatteryIconApplet.cpp | 4 +- .../System/BatteryIcon/BatteryIconApplet.h | 2 +- .../System/Keyboard/KeyboardApplet.cpp | 257 ++++++++++++++++++ .../Applets/System/Keyboard/KeyboardApplet.h | 66 +++++ .../InkHUD/Applets/System/Logo/LogoApplet.cpp | 10 +- .../InkHUD/Applets/System/Logo/LogoApplet.h | 2 +- .../InkHUD/Applets/System/Menu/MenuAction.h | 1 + .../InkHUD/Applets/System/Menu/MenuApplet.cpp | 253 ++++++++++++----- .../InkHUD/Applets/System/Menu/MenuApplet.h | 12 +- .../Notification/NotificationApplet.cpp | 11 +- .../System/Notification/NotificationApplet.h | 2 +- .../Applets/System/Pairing/PairingApplet.cpp | 4 +- .../Applets/System/Pairing/PairingApplet.h | 2 +- .../System/Placeholder/PlaceholderApplet.cpp | 2 +- .../System/Placeholder/PlaceholderApplet.h | 2 +- .../InkHUD/Applets/System/Tips/TipsApplet.cpp | 9 +- .../InkHUD/Applets/System/Tips/TipsApplet.h | 2 +- .../User/AllMessage/AllMessageApplet.cpp | 2 +- .../User/AllMessage/AllMessageApplet.h | 2 +- .../niche/InkHUD/Applets/User/DM/DMApplet.cpp | 2 +- .../niche/InkHUD/Applets/User/DM/DMApplet.h | 2 +- .../User/Positions/PositionsApplet.cpp | 4 +- .../Applets/User/Positions/PositionsApplet.h | 2 +- .../ThreadedMessage/ThreadedMessageApplet.cpp | 2 +- .../ThreadedMessage/ThreadedMessageApplet.h | 2 +- src/graphics/niche/InkHUD/Events.cpp | 35 ++- src/graphics/niche/InkHUD/Events.h | 5 + src/graphics/niche/InkHUD/InkHUD.cpp | 36 ++- src/graphics/niche/InkHUD/InkHUD.h | 10 +- src/graphics/niche/InkHUD/Renderer.cpp | 113 +++++++- src/graphics/niche/InkHUD/Renderer.h | 6 +- src/graphics/niche/InkHUD/SystemApplet.h | 10 +- src/graphics/niche/InkHUD/Tile.cpp | 16 +- src/graphics/niche/InkHUD/Tile.h | 2 + src/graphics/niche/InkHUD/WindowManager.cpp | 56 +++- src/graphics/niche/InkHUD/WindowManager.h | 3 + src/graphics/niche/InkHUD/docs/README.md | 4 +- 49 files changed, 852 insertions(+), 158 deletions(-) create mode 100644 src/graphics/niche/InkHUD/Applets/System/Keyboard/KeyboardApplet.cpp create mode 100644 src/graphics/niche/InkHUD/Applets/System/Keyboard/KeyboardApplet.h diff --git a/src/graphics/niche/InkHUD/Applet.cpp b/src/graphics/niche/InkHUD/Applet.cpp index 1e89ebe1b..ccdd76f97 100644 --- a/src/graphics/niche/InkHUD/Applet.cpp +++ b/src/graphics/niche/InkHUD/Applet.cpp @@ -55,7 +55,7 @@ InkHUD::Tile *InkHUD::Applet::getTile() } // Draw the applet -void InkHUD::Applet::render() +void InkHUD::Applet::render(bool full) { assert(assignedTile); // Ensure that we have a tile assert(assignedTile->getAssignedApplet() == this); // Ensure that we have a reciprocal link with the tile @@ -65,10 +65,11 @@ void InkHUD::Applet::render() wantRender = false; // Flag set by requestUpdate wantAutoshow = false; // Flag set by requestAutoShow. May or may not have been honored. wantUpdateType = Drivers::EInk::UpdateTypes::UNSPECIFIED; // Update type we wanted. May on may not have been granted. + wantFullRender = true; // Default to a full render updateDimensions(); resetDrawingSpace(); - onRender(); // Derived applet's drawing takes place here + onRender(full); // Draw the applet // Handle "Tile Highlighting" // Some devices may use an auxiliary button to switch between tiles @@ -115,6 +116,11 @@ Drivers::EInk::UpdateTypes InkHUD::Applet::wantsUpdateType() return wantUpdateType; } +bool InkHUD::Applet::wantsFullRender() +{ + return wantFullRender; +} + // Get size of the applet's drawing space from its tile // Performed immediately before derived applet's drawing code runs void InkHUD::Applet::updateDimensions() @@ -142,10 +148,11 @@ void InkHUD::Applet::resetDrawingSpace() // Once the renderer has given other applets a chance to process whatever event we just detected, // it will run Applet::render(), which may draw our applet to screen, if it is shown (foreground) // We should requestUpdate even if our applet is currently background, because this might be changed by autoshow -void InkHUD::Applet::requestUpdate(Drivers::EInk::UpdateTypes type) +void InkHUD::Applet::requestUpdate(Drivers::EInk::UpdateTypes type, bool full) { wantRender = true; wantUpdateType = type; + wantFullRender = full; inkhud->requestUpdate(); } diff --git a/src/graphics/niche/InkHUD/Applet.h b/src/graphics/niche/InkHUD/Applet.h index b35ca5cc0..69d35a234 100644 --- a/src/graphics/niche/InkHUD/Applet.h +++ b/src/graphics/niche/InkHUD/Applet.h @@ -64,10 +64,11 @@ class Applet : public GFX // Rendering - void render(); // Draw the applet + void render(bool full); // Draw the applet bool wantsToRender(); // Check whether applet wants to render bool wantsToAutoshow(); // Check whether applet wants to become foreground Drivers::EInk::UpdateTypes wantsUpdateType(); // Check which display update type the applet would prefer + bool wantsFullRender(); // Check whether applet wants to render over its previous render void updateDimensions(); // Get current size from tile void resetDrawingSpace(); // Makes sure every render starts with same parameters @@ -82,7 +83,7 @@ class Applet : public GFX // Event handlers - virtual void onRender() = 0; // All drawing happens here + virtual void onRender(bool full) = 0; // For drawing the applet virtual void onActivate() {} virtual void onDeactivate() {} virtual void onForeground() {} @@ -96,6 +97,9 @@ class Applet : public GFX virtual void onNavDown() {} virtual void onNavLeft() {} virtual void onNavRight() {} + virtual void onFreeText(char c) {} + virtual void onFreeTextDone() {} + virtual void onFreeTextCancel() {} virtual bool approveNotification(Notification &n); // Allow an applet to veto a notification @@ -108,8 +112,9 @@ class Applet : public GFX protected: void drawPixel(int16_t x, int16_t y, uint16_t color) override; // Place a single pixel. All drawing output passes through here - void requestUpdate(EInk::UpdateTypes type = EInk::UpdateTypes::UNSPECIFIED); // Ask WindowManager to schedule a display update - void requestAutoshow(); // Ask for applet to be moved to foreground + void requestUpdate(EInk::UpdateTypes type = EInk::UpdateTypes::UNSPECIFIED, + bool full = true); // Ask WindowManager to schedule a display update + void requestAutoshow(); // Ask for applet to be moved to foreground uint16_t X(float f); // Map applet width, mapped from 0 to 1.0 uint16_t Y(float f); // Map applet height, mapped from 0 to 1.0 @@ -164,6 +169,7 @@ class Applet : public GFX bool wantAutoshow = false; // Does the applet have new data it would like to display in foreground? NicheGraphics::Drivers::EInk::UpdateTypes wantUpdateType = NicheGraphics::Drivers::EInk::UpdateTypes::UNSPECIFIED; // Which update method we'd prefer when redrawing the display + bool wantFullRender = true; // Render with a fresh canvas using GFX::setFont; // Make sure derived classes use AppletFont instead of AdafruitGFX fonts directly using GFX::setRotation; // Block setRotation calls. Rotation is handled globally by WindowManager. diff --git a/src/graphics/niche/InkHUD/Applets/Bases/Map/MapApplet.cpp b/src/graphics/niche/InkHUD/Applets/Bases/Map/MapApplet.cpp index d383a11e4..4cf83966b 100644 --- a/src/graphics/niche/InkHUD/Applets/Bases/Map/MapApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/Bases/Map/MapApplet.cpp @@ -4,7 +4,7 @@ using namespace NicheGraphics; -void InkHUD::MapApplet::onRender() +void InkHUD::MapApplet::onRender(bool full) { // Abort if no markers to render if (!enoughMarkers()) { diff --git a/src/graphics/niche/InkHUD/Applets/Bases/Map/MapApplet.h b/src/graphics/niche/InkHUD/Applets/Bases/Map/MapApplet.h index f45a36071..11dfb39d9 100644 --- a/src/graphics/niche/InkHUD/Applets/Bases/Map/MapApplet.h +++ b/src/graphics/niche/InkHUD/Applets/Bases/Map/MapApplet.h @@ -27,7 +27,7 @@ namespace NicheGraphics::InkHUD class MapApplet : public Applet { public: - void onRender() override; + void onRender(bool full) override; protected: virtual bool shouldDrawNode(meshtastic_NodeInfoLite *node) { return true; } // Allow derived applets to filter the nodes diff --git a/src/graphics/niche/InkHUD/Applets/Bases/NodeList/NodeListApplet.cpp b/src/graphics/niche/InkHUD/Applets/Bases/NodeList/NodeListApplet.cpp index 5c9906fba..9794c3efb 100644 --- a/src/graphics/niche/InkHUD/Applets/Bases/NodeList/NodeListApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/Bases/NodeList/NodeListApplet.cpp @@ -103,7 +103,7 @@ uint8_t InkHUD::NodeListApplet::maxCards() } // Draw, using info which derived applet placed into NodeListApplet::cards for us -void InkHUD::NodeListApplet::onRender() +void InkHUD::NodeListApplet::onRender(bool full) { // ================================ diff --git a/src/graphics/niche/InkHUD/Applets/Bases/NodeList/NodeListApplet.h b/src/graphics/niche/InkHUD/Applets/Bases/NodeList/NodeListApplet.h index c2340027b..8babdba03 100644 --- a/src/graphics/niche/InkHUD/Applets/Bases/NodeList/NodeListApplet.h +++ b/src/graphics/niche/InkHUD/Applets/Bases/NodeList/NodeListApplet.h @@ -46,7 +46,7 @@ class NodeListApplet : public Applet, public MeshModule public: NodeListApplet(const char *name); - void onRender() override; + void onRender(bool full) override; bool wantPacket(const meshtastic_MeshPacket *p) override; ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) override; diff --git a/src/graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.cpp b/src/graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.cpp index c52719e55..71b6d9a7a 100644 --- a/src/graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.cpp @@ -6,7 +6,7 @@ using namespace NicheGraphics; // All drawing happens here // Our basic example doesn't do anything useful. It just passively prints some text. -void InkHUD::BasicExampleApplet::onRender() +void InkHUD::BasicExampleApplet::onRender(bool full) { printAt(0, 0, "Hello, World!"); diff --git a/src/graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.h b/src/graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.h index aed63cdc8..a36f6e8d5 100644 --- a/src/graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.h +++ b/src/graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.h @@ -28,7 +28,7 @@ class BasicExampleApplet : public Applet // You must have an onRender() method // All drawing happens here - void onRender() override; + void onRender(bool full) override; }; } // namespace NicheGraphics::InkHUD diff --git a/src/graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.cpp b/src/graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.cpp index 6b02f4c92..cf3fd7714 100644 --- a/src/graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.cpp @@ -35,7 +35,7 @@ ProcessMessage InkHUD::NewMsgExampleApplet::handleReceived(const meshtastic_Mesh // We can trigger a render by calling requestUpdate() // Render might be called by some external source // We should always be ready to draw -void InkHUD::NewMsgExampleApplet::onRender() +void InkHUD::NewMsgExampleApplet::onRender(bool full) { printAt(0, 0, "Example: NewMsg", LEFT, TOP); // Print top-left corner of text at (0,0) diff --git a/src/graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.h b/src/graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.h index 22670a0f0..599f08a7a 100644 --- a/src/graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.h +++ b/src/graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.h @@ -34,7 +34,7 @@ class NewMsgExampleApplet : public Applet, public SinglePortModule NewMsgExampleApplet() : SinglePortModule("NewMsgExampleApplet", meshtastic_PortNum_TEXT_MESSAGE_APP) {} // All drawing happens here - void onRender() override; + void onRender(bool full) override; // Your applet might also want to use some of these // Useful for setting up or tidying up diff --git a/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.cpp b/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.cpp index 67ef87f41..3afa80149 100644 --- a/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.cpp @@ -10,7 +10,7 @@ InkHUD::AlignStickApplet::AlignStickApplet() bringToForeground(); } -void InkHUD::AlignStickApplet::onRender() +void InkHUD::AlignStickApplet::onRender(bool full) { setFont(fontMedium); printAt(0, 0, "Align Joystick:"); @@ -152,19 +152,17 @@ void InkHUD::AlignStickApplet::onBackground() // Need to force an update, as a polite request wouldn't be honored, seeing how we are now in the background // Usually, onBackground is followed by another applet's onForeground (which requests update), but not in this case - inkhud->forceUpdate(EInk::UpdateTypes::FULL); + inkhud->forceUpdate(EInk::UpdateTypes::FULL, true); } void InkHUD::AlignStickApplet::onButtonLongPress() { sendToBackground(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::AlignStickApplet::onExitLong() { sendToBackground(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::AlignStickApplet::onNavUp() @@ -172,7 +170,6 @@ void InkHUD::AlignStickApplet::onNavUp() settings->joystick.aligned = true; sendToBackground(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::AlignStickApplet::onNavDown() @@ -181,7 +178,6 @@ void InkHUD::AlignStickApplet::onNavDown() settings->joystick.aligned = true; sendToBackground(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::AlignStickApplet::onNavLeft() @@ -190,7 +186,6 @@ void InkHUD::AlignStickApplet::onNavLeft() settings->joystick.aligned = true; sendToBackground(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::AlignStickApplet::onNavRight() @@ -199,7 +194,6 @@ void InkHUD::AlignStickApplet::onNavRight() settings->joystick.aligned = true; sendToBackground(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } #endif \ No newline at end of file diff --git a/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.h b/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.h index 8dba33165..7c8d00155 100644 --- a/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.h +++ b/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.h @@ -23,7 +23,7 @@ class AlignStickApplet : public SystemApplet public: AlignStickApplet(); - void onRender() override; + void onRender(bool full) override; void onForeground() override; void onBackground() override; void onButtonLongPress() override; diff --git a/src/graphics/niche/InkHUD/Applets/System/BatteryIcon/BatteryIconApplet.cpp b/src/graphics/niche/InkHUD/Applets/System/BatteryIcon/BatteryIconApplet.cpp index 4f99d99ee..0cc6f50ed 100644 --- a/src/graphics/niche/InkHUD/Applets/System/BatteryIcon/BatteryIconApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/System/BatteryIcon/BatteryIconApplet.cpp @@ -6,6 +6,8 @@ using namespace NicheGraphics; InkHUD::BatteryIconApplet::BatteryIconApplet() { + alwaysRender = true; // render everytime the screen is updated + // Show at boot, if user has previously enabled the feature if (settings->optionalFeatures.batteryIcon) bringToForeground(); @@ -44,7 +46,7 @@ int InkHUD::BatteryIconApplet::onPowerStatusUpdate(const meshtastic::Status *sta return 0; // Tell Observable to continue informing other observers } -void InkHUD::BatteryIconApplet::onRender() +void InkHUD::BatteryIconApplet::onRender(bool full) { // Fill entire tile // - size of icon controlled by size of tile diff --git a/src/graphics/niche/InkHUD/Applets/System/BatteryIcon/BatteryIconApplet.h b/src/graphics/niche/InkHUD/Applets/System/BatteryIcon/BatteryIconApplet.h index e5b4172be..ceaf88d7f 100644 --- a/src/graphics/niche/InkHUD/Applets/System/BatteryIcon/BatteryIconApplet.h +++ b/src/graphics/niche/InkHUD/Applets/System/BatteryIcon/BatteryIconApplet.h @@ -23,7 +23,7 @@ class BatteryIconApplet : public SystemApplet public: BatteryIconApplet(); - void onRender() override; + void onRender(bool full) override; int onPowerStatusUpdate(const meshtastic::Status *status); // Called when new info about battery is available private: diff --git a/src/graphics/niche/InkHUD/Applets/System/Keyboard/KeyboardApplet.cpp b/src/graphics/niche/InkHUD/Applets/System/Keyboard/KeyboardApplet.cpp new file mode 100644 index 000000000..57581d56b --- /dev/null +++ b/src/graphics/niche/InkHUD/Applets/System/Keyboard/KeyboardApplet.cpp @@ -0,0 +1,257 @@ +#ifdef MESHTASTIC_INCLUDE_INKHUD +#include "./KeyboardApplet.h" + +using namespace NicheGraphics; + +InkHUD::KeyboardApplet::KeyboardApplet() +{ + // Calculate row widths + for (uint8_t row = 0; row < KBD_ROWS; row++) { + rowWidths[row] = 0; + for (uint8_t col = 0; col < KBD_COLS; col++) + rowWidths[row] += keyWidths[row * KBD_COLS + col]; + } +} + +void InkHUD::KeyboardApplet::onRender(bool full) +{ + uint16_t em = fontSmall.lineHeight(); // 16 pt + uint16_t keyH = Y(1.0) / KBD_ROWS; + int16_t keyTopPadding = (keyH - fontSmall.lineHeight()) / 2; + + if (full) { // Draw full keyboard + for (uint8_t row = 0; row < KBD_ROWS; row++) { + + // Calculate the remaining space to be used as padding + int16_t keyXPadding = X(1.0) - ((rowWidths[row] * em) >> 4); + + // Draw keys + uint16_t xPos = 0; + for (uint8_t col = 0; col < KBD_COLS; col++) { + Color fgcolor = BLACK; + uint8_t index = row * KBD_COLS + col; + uint16_t keyX = ((xPos * em) >> 4) + ((col * keyXPadding) / (KBD_COLS - 1)); + uint16_t keyY = row * keyH; + uint16_t keyW = (keyWidths[index] * em) >> 4; + if (index == selectedKey) { + fgcolor = WHITE; + fillRect(keyX, keyY, keyW, keyH, BLACK); + } + drawKeyLabel(keyX, keyY + keyTopPadding, keyW, keys[index], fgcolor); + xPos += keyWidths[index]; + } + } + } else { // Only draw the difference + if (selectedKey != prevSelectedKey) { + // Draw previously selected key + uint8_t row = prevSelectedKey / KBD_COLS; + int16_t keyXPadding = X(1.0) - ((rowWidths[row] * em) >> 4); + uint16_t xPos = 0; + for (uint8_t i = prevSelectedKey - (prevSelectedKey % KBD_COLS); i < prevSelectedKey; i++) + xPos += keyWidths[i]; + uint16_t keyX = ((xPos * em) >> 4) + (((prevSelectedKey % KBD_COLS) * keyXPadding) / (KBD_COLS - 1)); + uint16_t keyY = row * keyH; + uint16_t keyW = (keyWidths[prevSelectedKey] * em) >> 4; + fillRect(keyX, keyY, keyW, keyH, WHITE); + drawKeyLabel(keyX, keyY + keyTopPadding, keyW, keys[prevSelectedKey], BLACK); + + // Draw newly selected key + row = selectedKey / KBD_COLS; + keyXPadding = X(1.0) - ((rowWidths[row] * em) >> 4); + xPos = 0; + for (uint8_t i = selectedKey - (selectedKey % KBD_COLS); i < selectedKey; i++) + xPos += keyWidths[i]; + keyX = ((xPos * em) >> 4) + (((selectedKey % KBD_COLS) * keyXPadding) / (KBD_COLS - 1)); + keyY = row * keyH; + keyW = (keyWidths[selectedKey] * em) >> 4; + fillRect(keyX, keyY, keyW, keyH, BLACK); + drawKeyLabel(keyX, keyY + keyTopPadding, keyW, keys[selectedKey], WHITE); + } + } + + prevSelectedKey = selectedKey; +} + +// Draw the key label corresponding to the char +// for most keys it draws the character itself +// for ['\b', '\n', ' ', '\x1b'] it draws special glyphs +void InkHUD::KeyboardApplet::drawKeyLabel(uint16_t left, uint16_t top, uint16_t width, char key, Color color) +{ + if (key == '\b') { + // Draw backspace glyph: 13 x 9 px + /** + * [][][][][][][][][] + * [][] [] + * [][] [] [] [] + * [][] [] [] [] + * [][] [] [] + * [][] [] [] [] + * [][] [] [] [] + * [][] [] + * [][][][][][][][][] + */ + const uint8_t bsBitmap[] = {0x0f, 0xf8, 0x18, 0x08, 0x32, 0x28, 0x61, 0x48, 0xc0, + 0x88, 0x61, 0x48, 0x32, 0x28, 0x18, 0x08, 0x0f, 0xf8}; + uint16_t leftPadding = (width - 13) >> 1; + drawBitmap(left + leftPadding, top + 1, bsBitmap, 13, 9, color); + } else if (key == '\n') { + // Draw done glyph: 12 x 9 px + /** + * [][] + * [][] + * [][] + * [][] + * [][] + * [][] [][] + * [][] [][] + * [][][] + * [] + */ + const uint8_t doneBitmap[] = {0x00, 0x30, 0x00, 0x60, 0x00, 0xc0, 0x01, 0x80, 0x03, + 0x00, 0xc6, 0x00, 0x6c, 0x00, 0x38, 0x00, 0x10, 0x00}; + uint16_t leftPadding = (width - 12) >> 1; + drawBitmap(left + leftPadding, top + 1, doneBitmap, 12, 9, color); + } else if (key == ' ') { + // Draw space glyph: 13 x 9 px + /** + * + * + * + * + * [] [] + * [] [] + * [][][][][][][][][][][][][] + * + * + */ + const uint8_t spaceBitmap[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0x08, 0x80, 0x08, 0xff, 0xf8, 0x00, 0x00, 0x00, 0x00}; + uint16_t leftPadding = (width - 13) >> 1; + drawBitmap(left + leftPadding, top + 1, spaceBitmap, 13, 9, color); + } else if (key == '\x1b') { + setTextColor(color); + std::string keyText = "ESC"; + uint16_t leftPadding = (width - getTextWidth(keyText)) >> 1; + printAt(left + leftPadding, top, keyText); + } else { + setTextColor(color); + if (key >= 0x61) + key -= 32; // capitalize + std::string keyText = std::string(1, key); + uint16_t leftPadding = (width - getTextWidth(keyText)) >> 1; + printAt(left + leftPadding, top, keyText); + } +} + +void InkHUD::KeyboardApplet::onForeground() +{ + handleInput = true; // Intercept the button input for our applet + + // Select the first key + selectedKey = 0; + prevSelectedKey = 0; +} + +void InkHUD::KeyboardApplet::onBackground() +{ + handleInput = false; +} + +void InkHUD::KeyboardApplet::onButtonShortPress() +{ + char key = keys[selectedKey]; + if (key == '\n') { + inkhud->freeTextDone(); + inkhud->closeKeyboard(); + } else if (key == '\x1b') { + inkhud->freeTextCancel(); + inkhud->closeKeyboard(); + } else { + inkhud->freeText(key); + } +} + +void InkHUD::KeyboardApplet::onButtonLongPress() +{ + char key = keys[selectedKey]; + if (key == '\n') { + inkhud->freeTextDone(); + inkhud->closeKeyboard(); + } else if (key == '\x1b') { + inkhud->freeTextCancel(); + inkhud->closeKeyboard(); + } else { + if (key >= 0x61) + key -= 32; // capitalize + inkhud->freeText(key); + } +} + +void InkHUD::KeyboardApplet::onExitShort() +{ + inkhud->freeTextCancel(); + inkhud->closeKeyboard(); +} + +void InkHUD::KeyboardApplet::onExitLong() +{ + inkhud->freeTextCancel(); + inkhud->closeKeyboard(); +} + +void InkHUD::KeyboardApplet::onNavUp() +{ + if (selectedKey < KBD_COLS) // wrap + selectedKey += KBD_COLS * (KBD_ROWS - 1); + else // move 1 row back + selectedKey -= KBD_COLS; + + // Request rendering over the previously drawn render + requestUpdate(EInk::UpdateTypes::FAST, false); + // Force an update to bypass lockRequests + inkhud->forceUpdate(EInk::UpdateTypes::FAST); +} + +void InkHUD::KeyboardApplet::onNavDown() +{ + selectedKey += KBD_COLS; + selectedKey %= (KBD_COLS * KBD_ROWS); + + // Request rendering over the previously drawn render + requestUpdate(EInk::UpdateTypes::FAST, false); + // Force an update to bypass lockRequests + inkhud->forceUpdate(EInk::UpdateTypes::FAST); +} + +void InkHUD::KeyboardApplet::onNavLeft() +{ + if (selectedKey % KBD_COLS == 0) // wrap + selectedKey += KBD_COLS - 1; + else // move 1 column back + selectedKey--; + + // Request rendering over the previously drawn render + requestUpdate(EInk::UpdateTypes::FAST, false); + // Force an update to bypass lockRequests + inkhud->forceUpdate(EInk::UpdateTypes::FAST); +} + +void InkHUD::KeyboardApplet::onNavRight() +{ + if (selectedKey % KBD_COLS == KBD_COLS - 1) // wrap + selectedKey -= KBD_COLS - 1; + else // move 1 column forward + selectedKey++; + + // Request rendering over the previously drawn render + requestUpdate(EInk::UpdateTypes::FAST, false); + // Force an update to bypass lockRequests + inkhud->forceUpdate(EInk::UpdateTypes::FAST); +} + +uint16_t InkHUD::KeyboardApplet::getKeyboardHeight() +{ + const uint16_t keyH = fontSmall.lineHeight() * 1.2; + return keyH * KBD_ROWS; +} +#endif diff --git a/src/graphics/niche/InkHUD/Applets/System/Keyboard/KeyboardApplet.h b/src/graphics/niche/InkHUD/Applets/System/Keyboard/KeyboardApplet.h new file mode 100644 index 000000000..306a8d8e3 --- /dev/null +++ b/src/graphics/niche/InkHUD/Applets/System/Keyboard/KeyboardApplet.h @@ -0,0 +1,66 @@ +#ifdef MESHTASTIC_INCLUDE_INKHUD + +/* + +System Applet to render an on-screeen keyboard + +*/ + +#pragma once + +#include "configuration.h" +#include "graphics/niche/InkHUD/InkHUD.h" +#include "graphics/niche/InkHUD/SystemApplet.h" +#include +namespace NicheGraphics::InkHUD +{ + +class KeyboardApplet : public SystemApplet +{ + public: + KeyboardApplet(); + + void onRender(bool full) override; + void onForeground() override; + void onBackground() override; + void onButtonShortPress() override; + void onButtonLongPress() override; + void onExitShort() override; + void onExitLong() override; + void onNavUp() override; + void onNavDown() override; + void onNavLeft() override; + void onNavRight() override; + + static uint16_t getKeyboardHeight(); // used to set the keyboard tile height + + private: + void drawKeyLabel(uint16_t left, uint16_t top, uint16_t width, char key, Color color); + + static const uint8_t KBD_COLS = 11; + static const uint8_t KBD_ROWS = 4; + + const char keys[KBD_COLS * KBD_ROWS] = { + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '\b', // row 0 + 'q', 'w', 'e', 'r', 't', 'y', 'u', 'i', 'o', 'p', '\n', // row 1 + 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', '!', ' ', // row 2 + 'z', 'x', 'c', 'v', 'b', 'n', 'm', ',', '.', '?', '\x1b' // row 3 + }; + + // This array represents the widths of each key in points + // 16 pt = line height of the text + const uint16_t keyWidths[KBD_COLS * KBD_ROWS] = { + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 24, // row 0 + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 24, // row 1 + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 24, // row 2 + 16, 16, 16, 16, 16, 16, 16, 10, 10, 12, 40 // row 3 + }; + + uint16_t rowWidths[KBD_ROWS]; + uint8_t selectedKey = 0; // selected key index + uint8_t prevSelectedKey = 0; +}; + +} // namespace NicheGraphics::InkHUD + +#endif diff --git a/src/graphics/niche/InkHUD/Applets/System/Logo/LogoApplet.cpp b/src/graphics/niche/InkHUD/Applets/System/Logo/LogoApplet.cpp index 4b55529bb..b2c58fc60 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Logo/LogoApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/System/Logo/LogoApplet.cpp @@ -30,7 +30,7 @@ InkHUD::LogoApplet::LogoApplet() : concurrency::OSThread("LogoApplet") // This is then drawn with a FULL refresh by Renderer::begin } -void InkHUD::LogoApplet::onRender() +void InkHUD::LogoApplet::onRender(bool full) { // Size of the region which the logo should "scale to fit" uint16_t logoWLimit = X(0.8); @@ -120,7 +120,7 @@ void InkHUD::LogoApplet::onBackground() // Need to force an update, as a polite request wouldn't be honored, seeing how we are now in the background // Usually, onBackground is followed by another applet's onForeground (which requests update), but not in this case - inkhud->forceUpdate(EInk::UpdateTypes::FULL); + inkhud->forceUpdate(EInk::UpdateTypes::FULL, true); } // Begin displaying the screen which is shown at shutdown @@ -138,10 +138,10 @@ void InkHUD::LogoApplet::onShutdown() // Intention is to restore display health. inverted = true; - inkhud->forceUpdate(Drivers::EInk::FULL, false); + inkhud->forceUpdate(Drivers::EInk::FULL, true, false); delay(1000); // Cooldown. Back to back updates aren't great for health. inverted = false; - inkhud->forceUpdate(Drivers::EInk::FULL, false); + inkhud->forceUpdate(Drivers::EInk::FULL, true, false); delay(1000); // Cooldown // Prepare for the powered-off screen now @@ -176,7 +176,7 @@ void InkHUD::LogoApplet::onReboot() textTitle = "Rebooting..."; fontTitle = fontSmall; - inkhud->forceUpdate(Drivers::EInk::FULL, false); + inkhud->forceUpdate(Drivers::EInk::FULL, true, false); // Perform the update right now, waiting here until complete } diff --git a/src/graphics/niche/InkHUD/Applets/System/Logo/LogoApplet.h b/src/graphics/niche/InkHUD/Applets/System/Logo/LogoApplet.h index 37f940453..d70dcc7b2 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Logo/LogoApplet.h +++ b/src/graphics/niche/InkHUD/Applets/System/Logo/LogoApplet.h @@ -21,7 +21,7 @@ class LogoApplet : public SystemApplet, public concurrency::OSThread { public: LogoApplet(); - void onRender() override; + void onRender(bool full) override; void onForeground() override; void onBackground() override; void onShutdown() override; diff --git a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuAction.h b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuAction.h index 7cfb33e9d..7ec76292b 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuAction.h +++ b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuAction.h @@ -19,6 +19,7 @@ namespace NicheGraphics::InkHUD enum MenuAction { NO_ACTION, SEND_PING, + FREE_TEXT, STORE_CANNEDMESSAGE_SELECTION, SEND_CANNEDMESSAGE, SHUTDOWN, diff --git a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp index b69e31e9a..6a141f73e 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp @@ -90,6 +90,8 @@ void InkHUD::MenuApplet::onForeground() OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); OSThread::enabled = true; + freeTextMode = false; + // Upgrade the refresh to FAST, for guaranteed responsiveness inkhud->forceUpdate(EInk::UpdateTypes::FAST); } @@ -116,6 +118,8 @@ void InkHUD::MenuApplet::onBackground() SystemApplet::lockRequests = false; SystemApplet::handleInput = false; + handleFreeText = false; + // Restore the user applet whose tile we borrowed if (borrowedTileOwner) borrowedTileOwner->bringToForeground(); @@ -340,12 +344,26 @@ void InkHUD::MenuApplet::execute(MenuItem item) inkhud->forceUpdate(Drivers::EInk::UpdateTypes::FULL); break; + case FREE_TEXT: + OSThread::enabled = false; + handleFreeText = true; + cm.freeTextItem.rawText.erase(); // clear the previous freetext message + freeTextMode = true; // render input field instead of normal menu + // Open the on-screen keyboard if the joystick is enabled + if (settings->joystick.enabled) + inkhud->openKeyboard(); + break; + case STORE_CANNEDMESSAGE_SELECTION: - cm.selectedMessageItem = &cm.messageItems.at(cursor - 1); // Minus one: offset for the initial "Send Ping" entry + if (!settings->joystick.enabled) + cm.selectedMessageItem = &cm.messageItems.at(cursor - 1); // Minus one: offset for the initial "Send Ping" entry + else + cm.selectedMessageItem = &cm.messageItems.at(cursor - 2); // Minus two: offset for the "Send Ping" and free text entry break; case SEND_CANNEDMESSAGE: cm.selectedRecipientItem = &cm.recipientItems.at(cursor); + // send selected message sendText(cm.selectedRecipientItem->dest, cm.selectedRecipientItem->channelIndex, cm.selectedMessageItem->rawText.c_str()); inkhud->forceUpdate(Drivers::EInk::UpdateTypes::FULL); // Next refresh should be FULL. Lots of button pressing to get here break; @@ -1373,8 +1391,14 @@ void InkHUD::MenuApplet::showPage(MenuPage page) currentPage = page; } -void InkHUD::MenuApplet::onRender() +void InkHUD::MenuApplet::onRender(bool full) { + // Free text mode draws a text input field and skips the normal rendering + if (freeTextMode) { + drawInputField(0, fontSmall.lineHeight(), X(1.0), Y(1.0) - fontSmall.lineHeight() - 1, cm.freeTextItem.rawText); + return; + } + if (items.size() == 0) LOG_ERROR("Empty Menu"); @@ -1493,44 +1517,48 @@ void InkHUD::MenuApplet::onRender() void InkHUD::MenuApplet::onButtonShortPress() { - // Push the auto-close timer back - OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); + if (!freeTextMode) { + // Push the auto-close timer back + OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); - if (!settings->joystick.enabled) { - if (!cursorShown) { - cursorShown = true; - cursor = 0; - } else { - do { - cursor = (cursor + 1) % items.size(); - } while (items.at(cursor).isHeader); - } - requestUpdate(Drivers::EInk::UpdateTypes::FAST); - } else { - if (cursorShown) - execute(items.at(cursor)); - else - showPage(MenuPage::EXIT); - if (!wantsToRender()) + if (!settings->joystick.enabled) { + if (!cursorShown) { + cursorShown = true; + cursor = 0; + } else { + do { + cursor = (cursor + 1) % items.size(); + } while (items.at(cursor).isHeader); + } requestUpdate(Drivers::EInk::UpdateTypes::FAST); + } else { + if (cursorShown) + execute(items.at(cursor)); + else + showPage(MenuPage::EXIT); + if (!wantsToRender()) + requestUpdate(Drivers::EInk::UpdateTypes::FAST); + } } } void InkHUD::MenuApplet::onButtonLongPress() { - // Push the auto-close timer back - OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); + if (!freeTextMode) { + // Push the auto-close timer back + OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); - if (cursorShown) - execute(items.at(cursor)); - else - showPage(MenuPage::EXIT); // Special case: Peek at root-menu; longpress again to close + if (cursorShown) + execute(items.at(cursor)); + else + showPage(MenuPage::EXIT); // Special case: Peek at root-menu; longpress again to close - // If we didn't already request a specialized update, when handling a menu action, - // then perform the usual fast update. - // FAST keeps things responsive: important because we're dealing with user input - if (!wantsToRender()) - requestUpdate(Drivers::EInk::UpdateTypes::FAST); + // If we didn't already request a specialized update, when handling a menu action, + // then perform the usual fast update. + // FAST keeps things responsive: important because we're dealing with user input + if (!wantsToRender()) + requestUpdate(Drivers::EInk::UpdateTypes::FAST); + } } void InkHUD::MenuApplet::onExitShort() @@ -1543,56 +1571,107 @@ void InkHUD::MenuApplet::onExitShort() void InkHUD::MenuApplet::onNavUp() { - OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); + if (!freeTextMode) { + OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); - if (!cursorShown) { - cursorShown = true; - cursor = 0; - } else { - do { - if (cursor == 0) - cursor = items.size() - 1; - else - cursor--; - } while (items.at(cursor).isHeader); + if (!cursorShown) { + cursorShown = true; + cursor = 0; + } else { + do { + if (cursor == 0) + cursor = items.size() - 1; + else + cursor--; + } while (items.at(cursor).isHeader); + } + + requestUpdate(Drivers::EInk::UpdateTypes::FAST); } - - requestUpdate(Drivers::EInk::UpdateTypes::FAST); } void InkHUD::MenuApplet::onNavDown() { - OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); + if (!freeTextMode) { + OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); - if (!cursorShown) { - cursorShown = true; - cursor = 0; - } else { - do { - cursor = (cursor + 1) % items.size(); - } while (items.at(cursor).isHeader); + if (!cursorShown) { + cursorShown = true; + cursor = 0; + } else { + do { + cursor = (cursor + 1) % items.size(); + } while (items.at(cursor).isHeader); + } + + requestUpdate(Drivers::EInk::UpdateTypes::FAST); } - - requestUpdate(Drivers::EInk::UpdateTypes::FAST); } void InkHUD::MenuApplet::onNavLeft() { - OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); + if (!freeTextMode) { + OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); - // Go to the previous menu page - showPage(previousPage); - requestUpdate(Drivers::EInk::UpdateTypes::FAST); + // Go to the previous menu page + showPage(previousPage); + requestUpdate(Drivers::EInk::UpdateTypes::FAST); + } } void InkHUD::MenuApplet::onNavRight() { - OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); + if (!freeTextMode) { + OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); + if (cursorShown) + execute(items.at(cursor)); + if (!wantsToRender()) + requestUpdate(Drivers::EInk::UpdateTypes::FAST); + } +} - if (cursorShown) - execute(items.at(cursor)); - if (!wantsToRender()) - requestUpdate(Drivers::EInk::UpdateTypes::FAST); +void InkHUD::MenuApplet::onFreeText(char c) +{ + if (cm.freeTextItem.rawText.length() >= menuTextLimit && c != '\b') + return; + if (c == '\b') { + if (!cm.freeTextItem.rawText.empty()) + cm.freeTextItem.rawText.pop_back(); + } else { + cm.freeTextItem.rawText += c; + } + requestUpdate(Drivers::EInk::UpdateTypes::FAST); +} + +void InkHUD::MenuApplet::onFreeTextDone() +{ + // Restart the auto-close timeout + OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); + OSThread::enabled = true; + + handleFreeText = false; + freeTextMode = false; + + if (!cm.freeTextItem.rawText.empty()) { + cm.selectedMessageItem = &cm.freeTextItem; + showPage(MenuPage::CANNEDMESSAGE_RECIPIENT); + } + requestUpdate(Drivers::EInk::UpdateTypes::FAST); +} + +void InkHUD::MenuApplet::onFreeTextCancel() +{ + // Restart the auto-close timeout + OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL); + OSThread::enabled = true; + + handleFreeText = false; + freeTextMode = false; + + // Clear the free text message + cm.freeTextItem.rawText.erase(); + + requestUpdate(Drivers::EInk::UpdateTypes::FAST); } // Dynamically create MenuItem entries for activating / deactivating Applets, for the "Applet Selection" submenu @@ -1647,6 +1726,10 @@ void InkHUD::MenuApplet::populateSendPage() // Position / NodeInfo packet items.push_back(MenuItem("Ping", MenuAction::SEND_PING, MenuPage::EXIT)); + // If joystick is available, include the Free Text option + if (settings->joystick.enabled) + items.push_back(MenuItem("Free Text", MenuAction::FREE_TEXT, MenuPage::SEND)); + // One menu item for each canned message uint8_t count = cm.store->size(); for (uint8_t i = 0; i < count; i++) { @@ -1746,6 +1829,48 @@ void InkHUD::MenuApplet::populateRecipientPage() items.push_back(MenuItem("Exit", MenuPage::EXIT)); } +void InkHUD::MenuApplet::drawInputField(uint16_t left, uint16_t top, uint16_t width, uint16_t height, std::string text) +{ + setFont(fontSmall); + uint16_t wrapMaxH = 0; + + // Draw the text, input box, and cursor + // Adjusting the box for screen height + while (wrapMaxH < height - fontSmall.lineHeight()) { + wrapMaxH += fontSmall.lineHeight(); + } + + // If the text is so long that it goes outside of the input box, the text is actually rendered off screen. + uint32_t textHeight = getWrappedTextHeight(0, width - 5, text); + if (!text.empty()) { + uint16_t textPadding = X(1.0) > Y(1.0) ? wrapMaxH - textHeight : wrapMaxH - textHeight + 1; + if (textHeight > wrapMaxH) + printWrapped(2, textPadding, width - 5, text); + else + printWrapped(2, top + 2, width - 5, text); + } + + uint16_t textCursorX = text.empty() ? 1 : getCursorX(); + uint16_t textCursorY = text.empty() ? fontSmall.lineHeight() + 2 : getCursorY() - fontSmall.lineHeight() + 3; + + if (textCursorX + 1 > width - 5) { + textCursorX = getCursorX() - width + 5; + textCursorY += fontSmall.lineHeight(); + } + + fillRect(textCursorX + 1, textCursorY, 1, fontSmall.lineHeight(), BLACK); + + // A white rectangle clears the top part of the screen for any text that's printed beyond the input box + fillRect(0, 0, X(1.0), top, WHITE); + + // Draw character limit + std::string ftlen = std::to_string(text.length()) + "/" + to_string(menuTextLimit); + uint16_t textLen = getTextWidth(ftlen); + printAt(X(1.0) - textLen - 2, 0, ftlen); + + // Draw the border + drawRect(0, top, width, wrapMaxH + 5, BLACK); +} // Renders the panel shown at the top of the root menu. // Displays the clock, and several other pieces of instantaneous system info, // which we'd prefer not to have displayed in a normal applet, as they update too frequently. @@ -1887,4 +2012,4 @@ void InkHUD::MenuApplet::freeCannedMessageResources() cm.messageItems.clear(); cm.recipientItems.clear(); } -#endif // MESHTASTIC_INCLUDE_INKHUD \ No newline at end of file +#endif // MESHTASTIC_INCLUDE_INKHUD diff --git a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.h b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.h index 82ccc8f45..7b092153b 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.h +++ b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.h @@ -32,7 +32,10 @@ class MenuApplet : public SystemApplet, public concurrency::OSThread void onNavDown() override; void onNavLeft() override; void onNavRight() override; - void onRender() override; + void onFreeText(char c) override; + void onFreeTextDone() override; + void onFreeTextCancel() override; + void onRender(bool full) override; void show(Tile *t); // Open the menu, onto a user tile void setStartPage(MenuPage page); @@ -51,6 +54,8 @@ class MenuApplet : public SystemApplet, public concurrency::OSThread void populateAutoshowPage(); // Dynamically create MenuItems for selecting which applets can autoshow void populateRecentsPage(); // Create menu items: a choice of values for settings.recentlyActiveSeconds + void drawInputField(uint16_t left, uint16_t top, uint16_t width, uint16_t height, + std::string text); // Draw input field for free text uint16_t getSystemInfoPanelHeight(); void drawSystemInfoPanel(int16_t left, int16_t top, uint16_t width, uint16_t *height = nullptr); // Info panel at top of root menu @@ -62,8 +67,9 @@ class MenuApplet : public SystemApplet, public concurrency::OSThread MenuPage previousPage = MenuPage::EXIT; uint8_t cursor = 0; // Which menu item is currently highlighted bool cursorShown = false; // Is *any* item highlighted? (Root menu: no initial selection) - + bool freeTextMode = false; uint16_t systemInfoPanelHeight = 0; // Need to know before we render + uint16_t menuTextLimit = 200; std::vector items; // MenuItems for the current page. Filled by ShowPage std::vector nodeConfigLabels; // Persistent labels for Node Config pages @@ -104,6 +110,8 @@ class MenuApplet : public SystemApplet, public concurrency::OSThread // Cleared onBackground (when MenuApplet closes) std::vector messageItems; std::vector recipientItems; + + MessageItem freeTextItem; } cm; Applet *borrowedTileOwner = nullptr; // Which applet we have temporarily replaced while displaying menu diff --git a/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.cpp b/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.cpp index 2ea9c7fe0..19cef4fbd 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.cpp @@ -65,7 +65,7 @@ int InkHUD::NotificationApplet::onReceiveTextMessage(const meshtastic_MeshPacket return 0; } -void InkHUD::NotificationApplet::onRender() +void InkHUD::NotificationApplet::onRender(bool full) { // Clear the region beneath the tile // Most applets are drawing onto an empty frame buffer and don't need to do this @@ -139,54 +139,47 @@ void InkHUD::NotificationApplet::onForeground() void InkHUD::NotificationApplet::onBackground() { handleInput = false; + inkhud->forceUpdate(EInk::UpdateTypes::FULL, true); } void InkHUD::NotificationApplet::onButtonShortPress() { dismiss(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::NotificationApplet::onButtonLongPress() { dismiss(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::NotificationApplet::onExitShort() { dismiss(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::NotificationApplet::onExitLong() { dismiss(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::NotificationApplet::onNavUp() { dismiss(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::NotificationApplet::onNavDown() { dismiss(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::NotificationApplet::onNavLeft() { dismiss(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } void InkHUD::NotificationApplet::onNavRight() { dismiss(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } // Ask the WindowManager to check whether any displayed applets are already displaying the info from this notification diff --git a/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.h b/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.h index 16ea13407..d398a36f3 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.h +++ b/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.h @@ -26,7 +26,7 @@ class NotificationApplet : public SystemApplet public: NotificationApplet(); - void onRender() override; + void onRender(bool full) override; void onForeground() override; void onBackground() override; void onButtonShortPress() override; diff --git a/src/graphics/niche/InkHUD/Applets/System/Pairing/PairingApplet.cpp b/src/graphics/niche/InkHUD/Applets/System/Pairing/PairingApplet.cpp index 09931f109..a09ff55d5 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Pairing/PairingApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/System/Pairing/PairingApplet.cpp @@ -9,7 +9,7 @@ InkHUD::PairingApplet::PairingApplet() bluetoothStatusObserver.observe(&bluetoothStatus->onNewStatus); } -void InkHUD::PairingApplet::onRender() +void InkHUD::PairingApplet::onRender(bool full) { // Header setFont(fontMedium); @@ -45,7 +45,7 @@ void InkHUD::PairingApplet::onBackground() // Need to force an update, as a polite request wouldn't be honored, seeing how we are now in the background // Usually, onBackground is followed by another applet's onForeground (which requests update), but not in this case - inkhud->forceUpdate(EInk::UpdateTypes::FULL); + inkhud->forceUpdate(EInk::UpdateTypes::FULL, true); } int InkHUD::PairingApplet::onBluetoothStatusUpdate(const meshtastic::Status *status) diff --git a/src/graphics/niche/InkHUD/Applets/System/Pairing/PairingApplet.h b/src/graphics/niche/InkHUD/Applets/System/Pairing/PairingApplet.h index b89783a25..4c2e95321 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Pairing/PairingApplet.h +++ b/src/graphics/niche/InkHUD/Applets/System/Pairing/PairingApplet.h @@ -22,7 +22,7 @@ class PairingApplet : public SystemApplet public: PairingApplet(); - void onRender() override; + void onRender(bool full) override; void onForeground() override; void onBackground() override; diff --git a/src/graphics/niche/InkHUD/Applets/System/Placeholder/PlaceholderApplet.cpp b/src/graphics/niche/InkHUD/Applets/System/Placeholder/PlaceholderApplet.cpp index 99cdeb0ac..228c8b2ca 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Placeholder/PlaceholderApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/System/Placeholder/PlaceholderApplet.cpp @@ -4,7 +4,7 @@ using namespace NicheGraphics; -void InkHUD::PlaceholderApplet::onRender() +void InkHUD::PlaceholderApplet::onRender(bool full) { // This placeholder applet fills its area with sparse diagonal lines hatchRegion(0, 0, width(), height(), 8, BLACK); diff --git a/src/graphics/niche/InkHUD/Applets/System/Placeholder/PlaceholderApplet.h b/src/graphics/niche/InkHUD/Applets/System/Placeholder/PlaceholderApplet.h index 78ba5cd89..fa40913e0 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Placeholder/PlaceholderApplet.h +++ b/src/graphics/niche/InkHUD/Applets/System/Placeholder/PlaceholderApplet.h @@ -17,7 +17,7 @@ namespace NicheGraphics::InkHUD class PlaceholderApplet : public SystemApplet { public: - void onRender() override; + void onRender(bool full) override; // Note: onForeground, onBackground, and wantsToRender are not meaningful for this applet. // The window manager decides when and where it should be rendered diff --git a/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.cpp b/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.cpp index 7869319fe..6cac2644b 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.cpp @@ -45,7 +45,7 @@ InkHUD::TipsApplet::TipsApplet() bringToForeground(); } -void InkHUD::TipsApplet::onRender() +void InkHUD::TipsApplet::onRender(bool full) { switch (tipQueue.front()) { case Tip::WELCOME: @@ -261,7 +261,7 @@ void InkHUD::TipsApplet::onBackground() // Need to force an update, as a polite request wouldn't be honored, seeing how we are now in the background // Usually, onBackground is followed by another applet's onForeground (which requests update), but not in this case - inkhud->forceUpdate(EInk::UpdateTypes::FULL); + inkhud->forceUpdate(EInk::UpdateTypes::FULL, true); } // While our SystemApplet::handleInput flag is true @@ -292,9 +292,8 @@ void InkHUD::TipsApplet::onButtonShortPress() inkhud->persistence->saveSettings(); } - // Close applet and clean the screen + // Close applet sendToBackground(); - inkhud->forceUpdate(EInk::UpdateTypes::FULL); } else { requestUpdate(); } @@ -306,4 +305,4 @@ void InkHUD::TipsApplet::onExitShort() onButtonShortPress(); } -#endif \ No newline at end of file +#endif diff --git a/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.h b/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.h index ff7eea046..2e81d678b 100644 --- a/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.h +++ b/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.h @@ -33,7 +33,7 @@ class TipsApplet : public SystemApplet public: TipsApplet(); - void onRender() override; + void onRender(bool full) override; void onForeground() override; void onBackground() override; void onButtonShortPress() override; diff --git a/src/graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.cpp b/src/graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.cpp index 7c6232f3b..96c519599 100644 --- a/src/graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.cpp @@ -34,7 +34,7 @@ int InkHUD::AllMessageApplet::onReceiveTextMessage(const meshtastic_MeshPacket * return 0; } -void InkHUD::AllMessageApplet::onRender() +void InkHUD::AllMessageApplet::onRender(bool full) { // Find newest message, regardless of whether DM or broadcast MessageStore::Message *message; diff --git a/src/graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h b/src/graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h index c74e16196..4aa97e4f1 100644 --- a/src/graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h +++ b/src/graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h @@ -30,7 +30,7 @@ class Applet; class AllMessageApplet : public Applet { public: - void onRender() override; + void onRender(bool full) override; void onActivate() override; void onDeactivate() override; diff --git a/src/graphics/niche/InkHUD/Applets/User/DM/DMApplet.cpp b/src/graphics/niche/InkHUD/Applets/User/DM/DMApplet.cpp index a3b9615a5..189a56cab 100644 --- a/src/graphics/niche/InkHUD/Applets/User/DM/DMApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/User/DM/DMApplet.cpp @@ -37,7 +37,7 @@ int InkHUD::DMApplet::onReceiveTextMessage(const meshtastic_MeshPacket *p) return 0; } -void InkHUD::DMApplet::onRender() +void InkHUD::DMApplet::onRender(bool full) { // Abort if no text message if (!latestMessage->dm.sender) { diff --git a/src/graphics/niche/InkHUD/Applets/User/DM/DMApplet.h b/src/graphics/niche/InkHUD/Applets/User/DM/DMApplet.h index b3dc36e66..4eb0ec704 100644 --- a/src/graphics/niche/InkHUD/Applets/User/DM/DMApplet.h +++ b/src/graphics/niche/InkHUD/Applets/User/DM/DMApplet.h @@ -30,7 +30,7 @@ class Applet; class DMApplet : public Applet { public: - void onRender() override; + void onRender(bool full) override; void onActivate() override; void onDeactivate() override; diff --git a/src/graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.cpp b/src/graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.cpp index ad0f9fc47..ae7679962 100644 --- a/src/graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.cpp @@ -5,10 +5,10 @@ using namespace NicheGraphics; -void InkHUD::PositionsApplet::onRender() +void InkHUD::PositionsApplet::onRender(bool full) { // Draw the usual map applet first - MapApplet::onRender(); + MapApplet::onRender(full); // Draw our latest "node of interest" as a special marker // ------------------------------------------------------- diff --git a/src/graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h b/src/graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h index 28a53cb0f..d0d3e5f07 100644 --- a/src/graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h +++ b/src/graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h @@ -24,7 +24,7 @@ class PositionsApplet : public MapApplet, public SinglePortModule { public: PositionsApplet() : SinglePortModule("PositionsApplet", meshtastic_PortNum_POSITION_APP) {} - void onRender() override; + void onRender(bool full) override; protected: ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) override; diff --git a/src/graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.cpp b/src/graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.cpp index fdb5a168d..f16721357 100644 --- a/src/graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.cpp +++ b/src/graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.cpp @@ -22,7 +22,7 @@ InkHUD::ThreadedMessageApplet::ThreadedMessageApplet(uint8_t channelIndex) store = new MessageStore("ch" + to_string(channelIndex)); } -void InkHUD::ThreadedMessageApplet::onRender() +void InkHUD::ThreadedMessageApplet::onRender(bool full) { // ============= // Draw a header diff --git a/src/graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h b/src/graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h index c986539b3..045e2a6fc 100644 --- a/src/graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h +++ b/src/graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h @@ -36,7 +36,7 @@ class ThreadedMessageApplet : public Applet, public SinglePortModule explicit ThreadedMessageApplet(uint8_t channelIndex); ThreadedMessageApplet() = delete; - void onRender() override; + void onRender(bool full) override; void onActivate() override; void onDeactivate() override; diff --git a/src/graphics/niche/InkHUD/Events.cpp b/src/graphics/niche/InkHUD/Events.cpp index fa45a49ed..e6c16d350 100644 --- a/src/graphics/niche/InkHUD/Events.cpp +++ b/src/graphics/niche/InkHUD/Events.cpp @@ -238,6 +238,39 @@ void InkHUD::Events::onNavRight() } } +void InkHUD::Events::onFreeText(char c) +{ + // Trigger the first system applet that wants to handle the new character + for (SystemApplet *sa : inkhud->systemApplets) { + if (sa->handleFreeText) { + sa->onFreeText(c); + break; + } + } +} + +void InkHUD::Events::onFreeTextDone() +{ + // Trigger the first system applet that wants to handle it + for (SystemApplet *sa : inkhud->systemApplets) { + if (sa->handleFreeText) { + sa->onFreeTextDone(); + break; + } + } +} + +void InkHUD::Events::onFreeTextCancel() +{ + // Trigger the first system applet that wants to handle it + for (SystemApplet *sa : inkhud->systemApplets) { + if (sa->handleFreeText) { + sa->onFreeTextCancel(); + break; + } + } +} + // Callback for deepSleepObserver // Returns 0 to signal that we agree to sleep now int InkHUD::Events::beforeDeepSleep(void *unused) @@ -266,7 +299,7 @@ int InkHUD::Events::beforeDeepSleep(void *unused) // then prepared a final powered-off screen for us, which shows device shortname. // We're updating to show that one now. - inkhud->forceUpdate(Drivers::EInk::UpdateTypes::FULL, false); + inkhud->forceUpdate(Drivers::EInk::UpdateTypes::FULL, true, false); delay(1000); // Cooldown, before potentially yanking display power // InkHUD shutdown complete diff --git a/src/graphics/niche/InkHUD/Events.h b/src/graphics/niche/InkHUD/Events.h index 1916cf78e..873f53fd5 100644 --- a/src/graphics/niche/InkHUD/Events.h +++ b/src/graphics/niche/InkHUD/Events.h @@ -37,6 +37,11 @@ class Events void onNavLeft(); // Navigate left void onNavRight(); // Navigate right + // Free text typing events + void onFreeText(char c); // New freetext character input + void onFreeTextDone(); + void onFreeTextCancel(); + int beforeDeepSleep(void *unused); // Prepare for shutdown int beforeReboot(void *unused); // Prepare for reboot int onReceiveTextMessage(const meshtastic_MeshPacket *packet); // Store most recent text message diff --git a/src/graphics/niche/InkHUD/InkHUD.cpp b/src/graphics/niche/InkHUD/InkHUD.cpp index 13b15b7e8..5fab67639 100644 --- a/src/graphics/niche/InkHUD/InkHUD.cpp +++ b/src/graphics/niche/InkHUD/InkHUD.cpp @@ -175,6 +175,25 @@ void InkHUD::InkHUD::navRight() } } +// Call this for keyboard input +// The Keyboard Applet also calls this +void InkHUD::InkHUD::freeText(char c) +{ + events->onFreeText(c); +} + +// Call this to complete a freetext input +void InkHUD::InkHUD::freeTextDone() +{ + events->onFreeTextDone(); +} + +// Call this to cancel a freetext input +void InkHUD::InkHUD::freeTextCancel() +{ + events->onFreeTextCancel(); +} + // Cycle the next user applet to the foreground // Only activated applets are cycled // If user has a multi-applet layout, the applets will cycle on the "focused tile" @@ -204,6 +223,18 @@ void InkHUD::InkHUD::openAlignStick() windowManager->openAlignStick(); } +// Open the on-screen keyboard +void InkHUD::InkHUD::openKeyboard() +{ + windowManager->openKeyboard(); +} + +// Close the on-screen keyboard +void InkHUD::InkHUD::closeKeyboard() +{ + windowManager->closeKeyboard(); +} + // In layouts where multiple applets are shown at once, change which tile is focused // The focused tile in the one which cycles applets on button short press, and displays menu on long press void InkHUD::InkHUD::nextTile() @@ -252,10 +283,11 @@ void InkHUD::InkHUD::requestUpdate() // Ignores all diplomacy: // - the display *will* update // - the specified update type *will* be used +// If the all parameter is true, the whole screen buffer is cleared and re-rendered // If the async parameter is false, code flow is blocked while the update takes place -void InkHUD::InkHUD::forceUpdate(EInk::UpdateTypes type, bool async) +void InkHUD::InkHUD::forceUpdate(EInk::UpdateTypes type, bool all, bool async) { - renderer->forceUpdate(type, async); + renderer->forceUpdate(type, all, async); } // Wait for any in-progress display update to complete before continuing diff --git a/src/graphics/niche/InkHUD/InkHUD.h b/src/graphics/niche/InkHUD/InkHUD.h index 5280d9ac7..ae029137e 100644 --- a/src/graphics/niche/InkHUD/InkHUD.h +++ b/src/graphics/niche/InkHUD/InkHUD.h @@ -63,6 +63,11 @@ class InkHUD void navLeft(); void navRight(); + // Freetext handlers + void freeText(char c); + void freeTextDone(); + void freeTextCancel(); + // Trigger UI changes // - called by various InkHUD components // - suitable(?) for use by aux button, connected in variant nicheGraphics.h @@ -71,6 +76,8 @@ class InkHUD void prevApplet(); void openMenu(); void openAlignStick(); + void openKeyboard(); + void closeKeyboard(); void nextTile(); void prevTile(); void rotate(); @@ -84,7 +91,8 @@ class InkHUD // - called by various InkHUD components void requestUpdate(); - void forceUpdate(Drivers::EInk::UpdateTypes type = Drivers::EInk::UpdateTypes::UNSPECIFIED, bool async = true); + void forceUpdate(Drivers::EInk::UpdateTypes type = Drivers::EInk::UpdateTypes::UNSPECIFIED, bool all = false, + bool async = true); void awaitUpdate(); // (Re)configuring WindowManager diff --git a/src/graphics/niche/InkHUD/Renderer.cpp b/src/graphics/niche/InkHUD/Renderer.cpp index 072e9dbd6..89a83c932 100644 --- a/src/graphics/niche/InkHUD/Renderer.cpp +++ b/src/graphics/niche/InkHUD/Renderer.cpp @@ -56,15 +56,16 @@ void InkHUD::Renderer::setDisplayResilience(uint8_t fastPerFull, float stressMul void InkHUD::Renderer::begin() { - forceUpdate(Drivers::EInk::UpdateTypes::FULL, false); + forceUpdate(Drivers::EInk::UpdateTypes::FULL, true, false); } // Set a flag, which will be picked up by runOnce, ASAP. // Quite likely, multiple applets will all want to respond to one event (Observable, etc) // Each affected applet can independently call requestUpdate(), and all share the one opportunity to render, at next runOnce -void InkHUD::Renderer::requestUpdate() +void InkHUD::Renderer::requestUpdate(bool all) { requested = true; + renderAll |= all; // We will run the thread as soon as we loop(), // after all Applets have had a chance to observe whatever event set this off @@ -79,10 +80,11 @@ void InkHUD::Renderer::requestUpdate() // Sometimes, however, we will want to trigger a display update manually, in the absence of any sort of applet event // Display health, for example. // In these situations, we use forceUpdate -void InkHUD::Renderer::forceUpdate(Drivers::EInk::UpdateTypes type, bool async) +void InkHUD::Renderer::forceUpdate(Drivers::EInk::UpdateTypes type, bool all, bool async) { requested = true; forced = true; + renderAll |= all; displayHealth.forceUpdateType(type); // Normally, we need to start the timer, in case the display is busy and we briefly defer the update @@ -219,7 +221,8 @@ void InkHUD::Renderer::render(bool async) Drivers::EInk::UpdateTypes updateType = decideUpdateType(); // Render the new image - clearBuffer(); + if (renderAll) + clearBuffer(); renderUserApplets(); renderPlaceholders(); renderSystemApplets(); @@ -247,6 +250,7 @@ void InkHUD::Renderer::render(bool async) // Tidy up, ready for a new request requested = false; forced = false; + renderAll = false; } // Manually fill the image buffer with WHITE @@ -259,6 +263,76 @@ void InkHUD::Renderer::clearBuffer() memset(imageBuffer, 0xFF, imageBufferHeight * imageBufferWidth); } +// Manually clear the pixels below a tile +void InkHUD::Renderer::clearTile(Tile *t) +{ + // Rotate the tile dimensions + int16_t left = 0; + int16_t top = 0; + uint16_t width = 0; + uint16_t height = 0; + switch (settings->rotation) { + case 0: + left = t->getLeft(); + top = t->getTop(); + width = t->getWidth(); + height = t->getHeight(); + break; + case 1: + left = driver->width - (t->getTop() + t->getHeight()); + top = t->getLeft(); + width = t->getHeight(); + height = t->getWidth(); + break; + case 2: + left = driver->width - (t->getLeft() + t->getWidth()); + top = driver->height - (t->getTop() + t->getHeight()); + width = t->getWidth(); + height = t->getHeight(); + break; + case 3: + left = t->getTop(); + top = driver->height - (t->getLeft() + t->getWidth()); + width = t->getHeight(); + height = t->getWidth(); + break; + } + + // Calculate the bounds to clear + uint16_t xStart = (left < 0) ? 0 : left; + uint16_t yStart = (top < 0) ? 0 : top; + if (xStart >= driver->width || yStart >= driver->height || left + width < 0 || top + height < 0) + return; // the box is completely off the screen + uint16_t xEnd = left + width; + uint16_t yEnd = top + height; + if (xEnd > driver->width) + xEnd = driver->width; + if (yEnd > driver->height) + yEnd = driver->height; + + // Clear the pixels + if (xStart == 0 && xEnd == driver->width) { // full width box is easier to clear + memset(imageBuffer + (yStart * imageBufferWidth), 0xFF, (yEnd - yStart) * imageBufferWidth); + } else { + const uint16_t byteStart = (xStart / 8) + 1; + const uint16_t byteEnd = xEnd / 8; + const uint8_t leadingByte = 0xFF >> (xStart - ((byteStart - 1) * 8)); + const uint8_t trailingByte = (0xFF00 >> (xEnd - (byteEnd * 8))) & 0xFF; + for (uint16_t i = yStart * imageBufferWidth; i < yEnd * imageBufferWidth; i += imageBufferWidth) { + // Set the leading byte + imageBuffer[i + byteStart - 1] |= leadingByte; + + // Set the continuous bytes + if (byteStart < byteEnd) + memset(imageBuffer + i + byteStart, 0xFF, byteEnd - byteStart); + + // Set the trailing byte + if (byteEnd != imageBufferWidth) + imageBuffer[i + byteEnd] |= trailingByte; + } + } +} + void InkHUD::Renderer::checkLocks() { lockRendering = nullptr; @@ -323,12 +397,12 @@ Drivers::EInk::UpdateTypes InkHUD::Renderer::decideUpdateType() if (!forced) { // User applets for (Applet *ua : inkhud->userApplets) { - if (ua && ua->isForeground()) + if (ua && ua->isForeground() && (ua->wantsToRender() || renderAll)) displayHealth.requestUpdateType(ua->wantsUpdateType()); } // System Applets for (SystemApplet *sa : inkhud->systemApplets) { - if (sa && sa->isForeground()) + if (sa && sa->isForeground() && (sa->wantsToRender() || sa->alwaysRender || renderAll)) displayHealth.requestUpdateType(sa->wantsUpdateType()); } } @@ -346,9 +420,16 @@ void InkHUD::Renderer::renderUserApplets() // Render any user applets which are currently visible for (Applet *ua : inkhud->userApplets) { - if (ua && ua->isActive() && ua->isForeground()) { + if (ua && ua->isActive() && ua->isForeground() && (ua->wantsToRender() || renderAll)) { + + // Clear the tile unless the applet wants to draw over its previous render + // or everything is getting re-rendered anyways + if (ua->wantsFullRender() && !renderAll) + clearTile(ua->getTile()); + uint32_t start = millis(); - ua->render(); // Draw! + bool full = ua->wantsFullRender() || renderAll; + ua->render(full); // Draw! uint32_t stop = millis(); LOG_DEBUG("%s took %dms to render", ua->name, stop - start); } @@ -370,6 +451,9 @@ void InkHUD::Renderer::renderSystemApplets() if (!sa->isForeground()) continue; + if (!sa->wantsToRender() && !sa->alwaysRender && !renderAll) + continue; + // Skip if locked by another applet if (lockRendering && lockRendering != sa) continue; @@ -381,8 +465,14 @@ void InkHUD::Renderer::renderSystemApplets() assert(sa->getTile()); + // Clear the tile unless the applet wants to draw over its previous render + // or everything is getting re-rendered anyways + if (sa->wantsFullRender() && !renderAll) + clearTile(sa->getTile()); + // uint32_t start = millis(); - sa->render(); // Draw! + bool full = sa->wantsFullRender() || renderAll; + sa->render(full); // Draw! // uint32_t stop = millis(); // LOG_DEBUG("%s took %dms to render", sa->name, stop - start); } @@ -409,7 +499,10 @@ void InkHUD::Renderer::renderPlaceholders() // uint32_t start = millis(); for (Tile *t : emptyTiles) { t->assignApplet(placeholder); - placeholder->render(); + // Clear the tile unless everything is getting re-rendered + if (!renderAll) + clearTile(t); + placeholder->render(true); // full render t->assignApplet(nullptr); } // uint32_t stop = millis(); diff --git a/src/graphics/niche/InkHUD/Renderer.h b/src/graphics/niche/InkHUD/Renderer.h index b6cf9e215..5cfb79277 100644 --- a/src/graphics/niche/InkHUD/Renderer.h +++ b/src/graphics/niche/InkHUD/Renderer.h @@ -37,8 +37,8 @@ class Renderer : protected concurrency::OSThread // Call these to make the image change - void requestUpdate(); // Update display, if a foreground applet has info it wants to show - void forceUpdate(Drivers::EInk::UpdateTypes type = Drivers::EInk::UpdateTypes::UNSPECIFIED, + void requestUpdate(bool all = false); // Update display, if a foreground applet has info it wants to show + void forceUpdate(Drivers::EInk::UpdateTypes type = Drivers::EInk::UpdateTypes::UNSPECIFIED, bool all = false, bool async = true); // Update display, regardless of whether any applets requested this // Wait for an update to complete @@ -65,6 +65,7 @@ class Renderer : protected concurrency::OSThread // Steps of the rendering process void clearBuffer(); + void clearTile(Tile *t); void checkLocks(); bool shouldUpdate(); Drivers::EInk::UpdateTypes decideUpdateType(); @@ -85,6 +86,7 @@ class Renderer : protected concurrency::OSThread bool requested = false; bool forced = false; + bool renderAll = false; // For convenience InkHUD *inkhud = nullptr; diff --git a/src/graphics/niche/InkHUD/SystemApplet.h b/src/graphics/niche/InkHUD/SystemApplet.h index fb5b06e51..32e0e58bb 100644 --- a/src/graphics/niche/InkHUD/SystemApplet.h +++ b/src/graphics/niche/InkHUD/SystemApplet.h @@ -22,9 +22,11 @@ class SystemApplet : public Applet public: // System applets have the right to: - bool handleInput = false; // - respond to input from the user button - bool lockRendering = false; // - prevent other applets from being rendered during an update - bool lockRequests = false; // - prevent other applets from triggering display updates + bool handleInput = false; // - respond to input from the user button + bool handleFreeText = false; // - respond to free text input + bool lockRendering = false; // - prevent other applets from being rendered during an update + bool lockRequests = false; // - prevent other applets from triggering display updates + bool alwaysRender = false; // - render every time the screen is updated virtual void onReboot() { onShutdown(); } // - handle reboot specially virtual void onApplyingChanges() {} @@ -41,4 +43,4 @@ class SystemApplet : public Applet }; // namespace NicheGraphics::InkHUD -#endif \ No newline at end of file +#endif diff --git a/src/graphics/niche/InkHUD/Tile.cpp b/src/graphics/niche/InkHUD/Tile.cpp index 5e548de74..8beb25f39 100644 --- a/src/graphics/niche/InkHUD/Tile.cpp +++ b/src/graphics/niche/InkHUD/Tile.cpp @@ -18,7 +18,7 @@ static int32_t runtaskHighlight() LOG_DEBUG("Dismissing Highlight"); InkHUD::Tile::highlightShown = false; InkHUD::Tile::highlightTarget = nullptr; - InkHUD::InkHUD::getInstance()->forceUpdate(Drivers::EInk::UpdateTypes::FAST); // Re-render, clearing the highlighting + InkHUD::InkHUD::getInstance()->forceUpdate(Drivers::EInk::UpdateTypes::FAST, true); // Re-render, clearing the highlighting return taskHighlight->disable(); } static void inittaskHighlight() @@ -190,6 +190,18 @@ void InkHUD::Tile::handleAppletPixel(int16_t x, int16_t y, Color c) } } +// Used in Renderer for clearing the tile +int16_t InkHUD::Tile::getLeft() +{ + return left; +} + +// Used in Renderer for clearing the tile +int16_t InkHUD::Tile::getTop() +{ + return top; +} + // Called by Applet base class, when setting applet dimensions, immediately before render uint16_t InkHUD::Tile::getWidth() { @@ -220,7 +232,7 @@ void InkHUD::Tile::requestHighlight() { Tile::highlightTarget = this; Tile::highlightShown = false; - inkhud->forceUpdate(Drivers::EInk::UpdateTypes::FAST); + inkhud->forceUpdate(Drivers::EInk::UpdateTypes::FAST, true); } // Starts the timer which will automatically dismiss the highlighting, if the tile doesn't organically redraw first diff --git a/src/graphics/niche/InkHUD/Tile.h b/src/graphics/niche/InkHUD/Tile.h index 0f5444f17..0c09e4704 100644 --- a/src/graphics/niche/InkHUD/Tile.h +++ b/src/graphics/niche/InkHUD/Tile.h @@ -29,6 +29,8 @@ class Tile void setRegion(uint8_t layoutSize, uint8_t tileIndex); // Assign region automatically, based on layout void setRegion(int16_t left, int16_t top, uint16_t width, uint16_t height); // Assign region manually void handleAppletPixel(int16_t x, int16_t y, Color c); // Receive px output from assigned applet + int16_t getLeft(); + int16_t getTop(); uint16_t getWidth(); uint16_t getHeight(); static uint16_t maxDisplayDimension(); // Largest possible width / height any tile may ever encounter diff --git a/src/graphics/niche/InkHUD/WindowManager.cpp b/src/graphics/niche/InkHUD/WindowManager.cpp index 0548de1eb..9c18fbd48 100644 --- a/src/graphics/niche/InkHUD/WindowManager.cpp +++ b/src/graphics/niche/InkHUD/WindowManager.cpp @@ -4,6 +4,7 @@ #include "./Applets/System/AlignStick/AlignStickApplet.h" #include "./Applets/System/BatteryIcon/BatteryIconApplet.h" +#include "./Applets/System/Keyboard/KeyboardApplet.h" #include "./Applets/System/Logo/LogoApplet.h" #include "./Applets/System/Menu/MenuApplet.h" #include "./Applets/System/Notification/NotificationApplet.h" @@ -148,6 +149,28 @@ void InkHUD::WindowManager::openAlignStick() } } +void InkHUD::WindowManager::openKeyboard() +{ + KeyboardApplet *keyboard = (KeyboardApplet *)inkhud->getSystemApplet("Keyboard"); + + if (keyboard) { + keyboard->bringToForeground(); + keyboardOpen = true; + changeLayout(); + } +} + +void InkHUD::WindowManager::closeKeyboard() +{ + KeyboardApplet *keyboard = (KeyboardApplet *)inkhud->getSystemApplet("Keyboard"); + + if (keyboard) { + keyboard->sendToBackground(); + keyboardOpen = false; + changeLayout(); + } +} + // On the currently focussed tile: cycle to the next available user applet // Applets available for this must be activated, and not already displayed on another tile void InkHUD::WindowManager::nextApplet() @@ -272,7 +295,6 @@ void InkHUD::WindowManager::toggleBatteryIcon() batteryIcon->sendToBackground(); // Force-render - // - redraw all applets inkhud->forceUpdate(EInk::UpdateTypes::FAST); } @@ -311,9 +333,25 @@ void InkHUD::WindowManager::changeLayout() menu->show(ft); } + // Resize for the on-screen keyboard + if (keyboardOpen) { + // Send all user applets to the background + // User applets currently don't handle free text input + for (uint8_t i = 0; i < inkhud->userApplets.size(); i++) + inkhud->userApplets.at(i)->sendToBackground(); + // Find the first system applet that can handle freetext and resize it + for (SystemApplet *sa : inkhud->systemApplets) { + if (sa->handleFreeText) { + const uint16_t keyboardHeight = KeyboardApplet::getKeyboardHeight(); + sa->getTile()->setRegion(0, 0, inkhud->width(), inkhud->height() - keyboardHeight - 1); + break; + } + } + } + // Force-render // - redraw all applets - inkhud->forceUpdate(EInk::UpdateTypes::FAST); + inkhud->forceUpdate(EInk::UpdateTypes::FAST, true); } // Perform necessary reconfiguration when user activates or deactivates applets at run-time @@ -347,7 +385,7 @@ void InkHUD::WindowManager::changeActivatedApplets() // Force-render // - redraw all applets - inkhud->forceUpdate(EInk::UpdateTypes::FAST); + inkhud->forceUpdate(EInk::UpdateTypes::FAST, true); } // Some applets may be permitted to bring themselves to foreground, to show new data @@ -433,8 +471,10 @@ void InkHUD::WindowManager::createSystemApplets() addSystemApplet("Logo", new LogoApplet, new Tile); addSystemApplet("Pairing", new PairingApplet, new Tile); addSystemApplet("Tips", new TipsApplet, new Tile); - if (settings->joystick.enabled) + if (settings->joystick.enabled) { addSystemApplet("AlignStick", new AlignStickApplet, new Tile); + addSystemApplet("Keyboard", new KeyboardApplet, new Tile); + } addSystemApplet("Menu", new MenuApplet, nullptr); @@ -457,9 +497,13 @@ void InkHUD::WindowManager::placeSystemTiles() inkhud->getSystemApplet("Logo")->getTile()->setRegion(0, 0, inkhud->width(), inkhud->height()); inkhud->getSystemApplet("Pairing")->getTile()->setRegion(0, 0, inkhud->width(), inkhud->height()); inkhud->getSystemApplet("Tips")->getTile()->setRegion(0, 0, inkhud->width(), inkhud->height()); - if (settings->joystick.enabled) + if (settings->joystick.enabled) { inkhud->getSystemApplet("AlignStick")->getTile()->setRegion(0, 0, inkhud->width(), inkhud->height()); - + const uint16_t keyboardHeight = KeyboardApplet::getKeyboardHeight(); + inkhud->getSystemApplet("Keyboard") + ->getTile() + ->setRegion(0, inkhud->height() - keyboardHeight, inkhud->width(), keyboardHeight); + } inkhud->getSystemApplet("Notification")->getTile()->setRegion(0, 0, inkhud->width(), 20); const uint16_t batteryIconHeight = Applet::getHeaderHeight() - 2 - 2; diff --git a/src/graphics/niche/InkHUD/WindowManager.h b/src/graphics/niche/InkHUD/WindowManager.h index 5def48f8c..948ef6131 100644 --- a/src/graphics/niche/InkHUD/WindowManager.h +++ b/src/graphics/niche/InkHUD/WindowManager.h @@ -31,6 +31,8 @@ class WindowManager void prevTile(); void openMenu(); void openAlignStick(); + void openKeyboard(); + void closeKeyboard(); void nextApplet(); void prevApplet(); void rotate(); @@ -64,6 +66,7 @@ class WindowManager void findOrphanApplets(); // Find any applets left-behind when layout changes std::vector userTiles; // Tiles which can host user applets + bool keyboardOpen = false; // For convenience InkHUD *inkhud = nullptr; diff --git a/src/graphics/niche/InkHUD/docs/README.md b/src/graphics/niche/InkHUD/docs/README.md index aa23f065f..8c30aba58 100644 --- a/src/graphics/niche/InkHUD/docs/README.md +++ b/src/graphics/niche/InkHUD/docs/README.md @@ -174,7 +174,7 @@ class BasicExampleApplet : public Applet // You must have an onRender() method // All drawing happens here - void onRender() override; + void onRender(bool full) override; }; ``` @@ -183,7 +183,7 @@ The `onRender` method is called when the display image is redrawn. This can happ ```cpp // All drawing happens here // Our basic example doesn't do anything useful. It just passively prints some text. -void InkHUD::BasicExampleApplet::onRender() +void InkHUD::BasicExampleApplet::onRender(bool full) { printAt(0, 0, "Hello, world!"); } From 8f630bfcf3f38fdc1e13a2c6f36f1331c4feabfa Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Fri, 30 Jan 2026 12:52:17 -0600 Subject: [PATCH 13/14] Fix typo in LED state comment And removed unused define --- variants/nrf52840/meshlink/variant.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/variants/nrf52840/meshlink/variant.h b/variants/nrf52840/meshlink/variant.h index 9075d0467..00107ac34 100644 --- a/variants/nrf52840/meshlink/variant.h +++ b/variants/nrf52840/meshlink/variant.h @@ -32,8 +32,7 @@ extern "C" { #define PIN_LED1 (24) // Built in white led for status #define LED_BLUE PIN_LED1 -#define LED_STATE_ON 0 // State when LED is litted -#define LED_INVERTED 1 +#define LED_STATE_ON 0 // State when LED is lit // Testing USB detection // #define NRF_APM @@ -150,4 +149,4 @@ static const uint8_t SCK = PIN_SPI_SCK; /*---------------------------------------------------------------------------- * Arduino objects - C++ only *----------------------------------------------------------------------------*/ -#endif \ No newline at end of file +#endif From 7b03980e0a02f55aaf041159eb6d7649ffc8e967 Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Fri, 30 Jan 2026 13:46:24 -0600 Subject: [PATCH 14/14] Refuse to send legacy DMs simply because the remote public key is unknown (#9485) * Refuse to send legacy DMs simply because the remote public key is unknown * Update src/mesh/Router.cpp - use more specific error Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/mesh/Router.cpp - more detail in warning message Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- src/mesh/Router.cpp | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/src/mesh/Router.cpp b/src/mesh/Router.cpp index 287fbcf60..32544a051 100644 --- a/src/mesh/Router.cpp +++ b/src/mesh/Router.cpp @@ -620,15 +620,19 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p) !(p->pki_encrypted != true && (strcasecmp(channels.getName(chIndex), Channels::serialChannel) == 0 || strcasecmp(channels.getName(chIndex), Channels::gpioChannel) == 0)) && // Check for valid keys and single node destination - config.security.private_key.size == 32 && !isBroadcast(p->to) && node != nullptr && - // Check for a known public key for the destination - (node->user.public_key.size == 32) && + config.security.private_key.size == 32 && !isBroadcast(p->to) && // Some portnums either make no sense to send with PKC p->decoded.portnum != meshtastic_PortNum_TRACEROUTE_APP && p->decoded.portnum != meshtastic_PortNum_NODEINFO_APP && p->decoded.portnum != meshtastic_PortNum_ROUTING_APP && p->decoded.portnum != meshtastic_PortNum_POSITION_APP) { LOG_DEBUG("Use PKI!"); if (numbytes + MESHTASTIC_HEADER_LENGTH + MESHTASTIC_PKC_OVERHEAD > MAX_LORA_PAYLOAD_LEN) return meshtastic_Routing_Error_TOO_LARGE; + // Check for a known public key for the destination + if (node == nullptr || node->user.public_key.size != 32) { + LOG_WARN("Unknown public key for destination node 0x%08x (portnum %d), refusing to send legacy DM", p->to, + p->decoded.portnum); + return meshtastic_Routing_Error_PKI_SEND_FAIL_PUBLIC_KEY; + } if (p->pki_encrypted && !memfll(p->public_key.bytes, 0, 32) && memcmp(p->public_key.bytes, node->user.public_key.bytes, 32) != 0) { LOG_WARN("Client public key differs from requested: 0x%02x, stored key begins 0x%02x", *p->public_key.bytes,