mirror of
https://github.com/meshtastic/firmware.git
synced 2026-09-20 21:39:01 -04:00
create-pull-request/update-protobufs-develop-from-develop
28
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Thomas Göttgens
|
fa81b47ecb |
refactor(sensorlib): unify on 0.4.1 and move the PCF RTCs to PCF8xRTC (#11754)
* chore(deps): unify SensorLib on 0.4.1 and port the 0.4.x API changes The 19 SensorLib declarations were split across 0.3.1, 0.3.4 and 0.4.1. Pin all of them to 0.4.1 and fix the renovate datasource on ThinkNode-M9 (custom -> custom.pio). API changes in 0.4.x: - BMA423Sensor: the configAccelerometer/enableFeature/readIrqStatus surface is gone. SensorBMA423 now derives from SensorBMA4XX and dispatches tilt and tap through callbacks driven by update(). - BHI260APSensor: SensorRemap is a scoped enum in sensor/SensorDefs.hpp, and BoschSensorInfo members are protected, so read them through the accessors. - ExtensionIOXL9555 is renamed to IoExpanderXL9555 and the touch drivers moved under touch/. Point the includes at the current paths instead of the compatibility shims, which emit warnings on every build. Drop four lewisxhe/PCF8563_Library declarations. Nothing in the tree includes pcf8563.h; all RTC code goes through SensorLib. Drop the BMA423_INT block. No variant defines BMA423_INT (t-watch-s3 defines BMA4XX_INT), so it has never been compiled. Interrupt-driven wake on BMA423 is unimplemented rather than regressed by this change. Drop the T_WATCH_S3 branch in BHI260APSensor. That file requires HAS_BHI260AP, which T_WATCH_S3 does not define. SensorQMC6309.hpp does not exist in 0.3.4, so src/motion/QMC6309Sensor.cpp compiles for the first time on 0.4.1. * fix(motion): fail BMA423 init when the sensor rejects its configuration configAccelerometer, enableTiltDetector and enableTapDetector return false only on an I2C or driver-level failure, so treat them the way QMC6309Sensor treats configMagnetometer rather than initializing a sensor that never took its settings. Trim the t-watch-ultra placement comment to the two lines the coding guidelines allow. * refactor(rtc): drive the PCF clocks from PCF8xRTC instead of SensorLib SensorLib reaches its PCF8563 and PCF85063 drivers through a comm layer spanning Arduino, ESP-IDF, SPI and custom callbacks, which is a lot of code to link for four calls on an I2C RTC. Measured against develop, the boards that pull SensorLib grew about 10 KB moving from 0.3.4 to 0.4.1, while the nRF52 boards that do not pull it moved by 100-300 bytes. meshtastic/PCF8xRTC covers both parts in one class over Adafruit BusIO, which every board with a PCF part already links. Ten boards used SensorLib for nothing but the RTC and now drop it entirely; the remaining seven keep it for a BMA423, BHI260AP, QMI8658, XL9555 or touch controller and take the new driver for their RTC. Behaviour changes with it. Both parts latch an oscillator-stop flag on power loss, which the old path ignored: readFromRTC() now refuses a calendar the chip has marked invalid rather than feeding a plausible wrong date to BUILD_EPOCH, the result of begin() is checked, and a failed set is logged. The isBitSet workaround moves from configuration.h to MMC5983MASensor.h. It worked only because configuration.h pulled SensorLib.h in first, so the later include was a no-op and the macro stayed undefined; with the global include gone it has to sit where SensorLib and the SparkFun header actually meet. * fix(rtc): report a missing PCF chip separately from a stopped oscillator lostPower() reads a register, so it also returns true when the chip cannot be reached at all. Folding it into one warning meant a failed begin() reported "oscillator stopped", which is a different fault. * fix(t5s3): read GT911 touches through getTouchPoints 0.4.x dropped the default argument from getPoint(x, y, count) and marked it deprecated, so the two-argument call no longer resolves: variant.cpp:618:27: error: no matching function for call to 'TouchDrvGT911::getPoint(int16_t*, int16_t*)' Use getTouchPoints(), which is what the deprecation points at, rather than passing the count to a call that is on its way out. |
||
|
Jonathan BennettandClaude Fable 5
|
5baad2e2a8 |
logging: compile out LOG_TRACE by default, demote chatty DEBUG lines, drop redundant logs (#11391)
* logging: gate LOG_TRACE behind MESHTASTIC_TRACE_LOGGING, drop redundant reclock logs LOG_TRACE now compiles out by default so trace-level diagnostics cost no flash; enable with -DMESHTASTIC_TRACE_LOGGING. Portduino keeps it on for the traceFilename packet-trace feature. Remove the 66 caller-side I2C reclock/restore log lines in the telemetry sensors: ReClockI2C::setClock/restoreClock already log both frequencies internally (now at trace level, since they fire every sensor read). Also unify near-duplicate literals (colon/case/punctuation variants) so linker string dedup applies, and drop an information-free bare 'done'. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * logging: demote chatty per-packet/per-poll DEBUG lines to trace level With LOG_TRACE compiled out by default, per-iteration chatter (packet bookkeeping, sensor poll values, e-ink refresh reasons, GPS pin states, UI runState traces) now costs no flash on device builds while remaining one -DMESHTASTIC_TRACE_LOGGING away. 108 lines demoted, 4 information- free lines removed; failure paths, drop reasons, and one-time init logs all stay at debug level. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * logging: address CodeRabbit review on trace-gate PR - GPS: pass serial-derived buffers as %s args, never as format strings (untrusted bytes could contain % directives) - 0x%08x for packet id / NodeNum per convention (Router, CannedMessage, NeighborInfo); unsigned casts for size_t args; %u for uint32_t delta - EInk: async full-refresh begin/complete back to DEBUG (rare state transitions); per-frame SKIPPED lines stay trace Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * logging: gate trace on the flag's value, not its presence -DMESHTASTIC_TRACE_LOGGING=0 previously *enabled* trace logging because the gate tested definedness. The flag now defaults per-platform (portduino 1, else 0) and both backends test the value, so =0 disables, =1 or a bare -D enables. Also cast tx_after-millis() to uint32_t for %u (millis() is unsigned long on native). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * logging: clang-format rewrap after specifier widening Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * Even fewer bytes! * logging: keep compile-gated debug lines at debug level; fix native-suite-count Lines already inside default-off #ifdef blocks (GPS_DEBUG, DEBUG_LOOP_TIMING) cost no flash and should stay visible at debug level when their gate is enabled, rather than also requiring MESHTASTIC_TRACE_LOGGING. test/native-suite-count lags the two test_event_channel_* suites added by #11045 (develop's Native Suite Count check has the same mismatch); bump 46 -> 47. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * gps: route GPS_DEBUG diagnostics through a LOG_DEBUG_GPS() macro (#11414) Replaces 27 log-only #ifdef GPS_DEBUG blocks across GPS.cpp, PositionModule, MeshService, and GPSStatus.h with a single-line LOG_DEBUG_GPS() call (src/gps/GPSLog.h, modeled on LOG_MIGRATION: value-gated, ((void)0) when off). Blocks containing declarations, control flow, hexDump, or nested conditionals keep an explicit '#if GPS_DEBUG' guard. RTC.cpp's per-reading raw time dumps and per-candidate rejection chatter fold under the same gate; quality transitions and boot-time seeding stay at debug. Also fixes the '// define GPS_DEBUG' missing-# typo in two variant headers and updates all seven commented examples to the value form ('#define GPS_DEBUG 1') required by the value-based gate. Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 Co-authored-by: Claude <noreply@anthropic.com> * gps: declare RTC gmtime result as pointer to const (cppcheck) With the setTime debug dump gated behind GPS_DEBUG, all remaining uses of t are reads; cppcheck (constVariablePointer) now flags it. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
Austin
|
8d3ad2a146 |
Remove board_check (now using normal matrix) (#11312)
This was being misused / misunderstood (most were a no-op already). |
||
|
Austin
|
76f4340f3a |
Add explicit board_level = release (#11305)
Relying on board_level = <empty> was causing some inheritence footguns. Let's be explicit about what's being released. |
||
|
Jonathan Bennett
|
87bb149afb |
adds VARIANT_TOUCHSCREEN and ENABLE_TOUCH_INT (#10815)
* addsVARIANT_TOUCHSCREEN and ENABLE_TOUCH_INT * Remove a duplicated _getTouch function pointer |
||
|
Jonathan Bennett
|
fd8ba4fa4e |
Chop down tft-related loooong ifdefs chains (#10803)
* Chop down tft-related loooong ifdefs chains * Fix accidental sweep-up of portduino into screen #ifdef refactor |
||
|
|
a541957480 |
ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)
* Migrate esp32 families to pioarduino platform
* ESP32c6 align text.handler_execute same as C3
* Use pioarduino `develop`
The latest fixes and the latest bugs!
* preliminary esp32p4.ini
* pioarduino: Update LovyanGFX
Includes Manuel's recent commit
* pioarduino 3.3.6
* pioarduino 3.3.6 *release*
chasing the release
* pioarduino: Fix OG ESP32 duplicate libs
* pioarduino: T-Beam 1W CDC mode
* pioarduino: disable network provisioning (wifiprov)
* pioarduino: use legacy esptoolpy naming (forward-compatible)
* Update lovyangfx from `develop` commit to 1.2.19
* fix esp32p4.ini
* check for esp32 w/ wifi
* esp32-p4 specific adaptations
* Switch to meshtastic/esp32_https_server fork (idf5 branch)
* don't ignore esp_lcd
* config for MUI
* fix/workaround SDMMC
* revert
|
||
|
Jonathan Bennett
|
24c4162a75 |
Standardize PMU IRQ handling and enable power button cancel on tbeam-s3 (#10285)
* Standardize PMU IRQ handling and enable power button as cancel on tbeam s3 * Original T-beam, too |
||
|
Jonathan Bennett
|
3a87e746a8 | No longer need undefines, thanks to #10179 (#10180) | ||
|
Austin
|
0abd3cdde8 |
ESP32: Take away "tbeam" boards PSRAM to reclaim iram (#10036)
You read that right! Disable PSRAM on the ttgo-tbeam board to reclaim *iram*. ttgo-tbeam.json is a copy of https://github.com/platformio/platform-espressif32/blob/v6.13.0/boards/ttgo-t-beam.json with HAS_PSRAM removed. PSRAM support on OG-ESP32 involves a lot of iram usage thanks to iram-heavy workarounds that have been added to address hardware bugs. See https://docs.espressif.com/projects/esp-idf/en/v4.4/esp32/api-guides/performance/ram-usage.html#optimizing-iram-usage |
||
|
Austin
|
5a009889cc |
Deps: Cleanup LewisHe library references (#10007)
We cache and dedupe our dependencies, referring to them with multiple methods/urls is just noise. ``` lewisxhe/XPowersLib@0.3.3 lewisxhe/SensorLib@0.3.4 ``` This does *not* include any updates, just a cleanup. |
||
|
+19
|
4c91beeda9 |
Develop to master (#9618)
* Don't ever define PIN_LED or BLE_LED_INVERTED (#9494)
* Don't ever define PIN_LED
* Deprecate BLE_LED_INVERTED
* Add StatusMessage module and config overrides (#9351)
* Add StatusMessage module and config overrides
* Trunk
* Don't reboot node simply for a StatusMessage config update
* Missed in reviews - fixing send bubble (#9505)
* Prefer EXT_PWR_DETECT pin over chargingVolt to detect power unplugged (#9511)
* Make sure we always return a value in NodeDB::restorePreferences() (#9516)
In case FScom is not defined there is no return statement. This
moves the return outside of the ifdef to make sure a defined
value is returned.
* Inkhud battery icon improvements. (#9513)
* Inkhud battery icon improvements.
Fixes the battery icon draining from the flat side towards the bump, which is backwards from general design language seen on most devices
By request of kr0n05_ on discord, adds the ability to mirror the battery icon which fixes that issue in another way, and is also a common design seen on other devices.
* Remove option for icon mirroring
* Add border + dither to battery to prevent font overlap
* Fix trunk format
* Code cleanup, courtesy of Xaositek.
* Add reply bot module with DM-only responses and rate limiting (#9456)
* Implement Meshtastic reply bot module with ping and status features
Adds a reply bot module that listens for /ping, /hello, and /test commands received via direct messages or broadcasts on the primary channel. The module always replies via direct message to the sender only, reporting hop count, RSSI, and SNR. Per-sender cooldowns are enforced to reduce network spam, and the module can be excluded at build time via a compile flag. Updates include the new module source files and required build configuration changes.
* Update ReplyBotModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/ReplyBotModule.h
Match the existing MESHTASTIC_EXCLUDE_* guard pattern so the module is excluded by default.
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/ReplyBotModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Tidying up
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* HotFix for ReplyBot - Modules.cpp included and moved configuration.h (#9532)
* Undefine LED_BUILTIN (#9531)
Keep variant in sync with
https://github.com/meshtastic/firmware/commit/df40085
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add agc reset attempt (#8163)
* Add agc reset attempt
* Add radioLibInterface include
* Trunk
* AGC reset don't crash, don't naively call
* Update src/main.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Use Throttle function
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Remove unused hmx variable (#9529)
The variable is not used at all in the function, remove it to
silence the compiler warning.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Rename LED_PIN to LED_POWER, move handling out of main to dedicated module (#9512)
* Rename LED_PIN to LED_POWER, move handling out of main to dedicated module
* Misc
* Remove errant endif
* Fix hop_limit upgrade detection (#9550)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* meshtasticd: Fix install on Fedora 43 (#9556)
* RPM: Include meshtasticd-start.sh (#9561)
* Add Slash Key to VirtualKeyboard (#9563)
Addition of ? and / to the virtual Keyboard via short and long press
* Add support for CW2015 LiPo battery fuel gauge (#9564)
* Add support for CW2015 LiPo battery fuel gauge
* Address Copilot's concerns, minor fixups
* Make LED_POWER blip even in critical battery (#9545)
* Enable FORTIFY and SP for native builds (#9537)
* Enable FORITFY and NX for native builds
meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack.
This gives the following improvements on Debian Trixie:
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd
Tested with --sim mode I do not get any crashes or similar.
* Enable FORTIFY and NX for native builds
meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack.
This gives the following improvements on Debian Trixie:
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd
Tested with --sim mode I do not get any crashes or similar.
* Enable FORTIFY and SP for native builds
meshtasticd does have a stack canaries and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and stack canaries.
This gives the following improvements on Debian Trixie:
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd
Tested with --sim mode I do not get any crashes or similar.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update built-in documentation for current method of implementation (#9592)
* Refactor logging in ProtobufModule to ensure message details are logged after successful decoding (#9536)
* Automated version bumps (#9604)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Add missing openocd_target to custom nrf52 boards (#9603)
This stops platformio complaining about `Missing target configuration for me25ls01-4y10td` etc when trying to flash with nrfutil.
* Add sdl libs for native builds (#9595)
* Add sdl libs for native builds
* Alpine try again
* fix some random compiler warnings (#9596)
* Modify the dependency library of v4-tft (#9507)
* BaseUI: Favorite Screen Signal Quality improvement (#9566)
* Favorite Signal Quality improvement
* Show Voltage if node shares it.
* Trunk Fix
* Change Favorite tittle to encase name with Asterisks
* Add Pluggin In condition for Battery Line
* Adjust getUptimeStr Prefixes
* Create isAPIConnected for SharedCommon usage
* Correct leftSideSpacing to account for isAPIConnected
---------
Co-authored-by: Jason P <applewiz@mac.com>
* ExternalNotification and StatusLED now call AmbientLighting to update… (#9554)
* ExternalNotification and StatusLED now call AmbientLighting to update RGB LEDs. Add optional heartbeat
* Don't overwrite RGB state if heartbeat is disabled.
* Use the right define
* Remove another .h and make rgb static
* move rgb objects into AmbientLighting class
* Straighten out AmbientLighting Thread object
* Use %f for floats
* Fixes on SCD4X admin comands (#9607)
* Fixes on SCD4X admin comands
* Minor fix in logs for SEN5X
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* feat/add sfa30 (#9372)
* Move PMSA003I to separate class and update AQ telemetry
* AirQualityTelemetry module not depend on PM sensor presence
* Remove commented line
* Fixes on PMS class
* Add missing warmup period to wakeUp function
* Fixes on compilation for different variants
* Add functions to check for I2C bus speed and set it
* Initial implementation for SFA30Sensor
* Move PMSA003I to separate class and update AQ telemetry
* AirQualityTelemetry module not depend on PM sensor presence
* Remove commented line
* Fixes on PMS class
* Add missing warmup period to wakeUp function
* Fixes on compilation for different variants
* Add functions to check for I2C bus speed and set it
* Add ScreenFonts.h
Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>
* PMSA003I 1st round test
* Fix I2C scan speed
* Fix minor issues and bring back I2C SPEED def
* Remove PMSA003I library as its no longer needed
* Add functional SCD4X
* Fix screen frame for CO2
* Add admin commands to SCD4X class
* Add further admin commands and fixes.
* Remove unused I2C speed functions and cleanup
* Cleanup of SEN5X specific code added from switching branches
* Remove SCAN_I2C_CLOCK_SPEED block as its not needed
* Remove associated functions for setting I2C speed
* Unify build epoch to add flag in platformio-custom.py (#7917)
* Unify build_epoch replacement logic in platformio-custom
* Missed one
* Fix build error in rak_wismesh_tap_v2 (#7905)
In the logs was:
"No screen resolution defined in build_flags. Please define DISPLAY_SIZE."
set according to similar devices.
* Put guards in place around debug heap operations (#7955)
* Put guards in place around debug heap operations
* Add macros to clean up code
* Add pointer as well
* Cleanup
* Fix memory leak in NextHopRouter: always free packet copy when removing from pending
* Formatting
* Only queue 2 client notification
* Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak
Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap
* Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak
Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap
* Update protobufs (#7973)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* T-Lora Pager: Support LR1121 and SX1280 models (#7956)
* T-Lora Pager: Support LR1121 and SX1280 models
* Remove ifdefs
* Trunk
* Trunk
* Static memory pool allocation (#7966)
* Static memory pool
* Initializer
* T-Lora Pager: Support LR1121 and SX1280 models (#7956)
* T-Lora Pager: Support LR1121 and SX1280 models
* Remove ifdefs
---------
Co-authored-by: WillyJL <me@willyjl.dev>
* Portduino dynamic alloc
* Missed
* Drop the limit
* Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Fix json report crashes on esp32 (#7978)
* Tweak maximums
* Fix DRAM overflow on old esp32 targets
* Guard bad time warning logs using GPS_DEBUG (#7897)
In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy.
In combination, these result in a spamming of the logs when a bad time is found
When the GPS is active, we're calling the GPS thread every 0.2secs.
So this log could be printed 4,500 times in a no-lock scenario :)
Reserve this experience for developers using GPS_DEBUG.
Fixes https://github.com/meshtastic/firmware/issues/7896
* Scale probe buffer size based on current baud rate (#7975)
* Scale probe buffer size based on current baud rate
* Throttle bad time validation logging and fix time comparison logic
* Remove comment
* Missed the other instances
* Copy pasta
* Fix GPS gm_mktime memory leak (#7981)
* Fix overflow of time value (#7984)
* Fix overflow of time value
* Revert "Fix overflow of time value"
This reverts commit
|
||
|
Jonathan Bennett
|
45fbc0f9d3 |
Remove stale variant.h defines (#9470)
* Remove noop CANNED_MESSAGE_MODULE_ENABLE define * Remove over-eager warning removal * Remove unused LED_CONN * Dead defines removal * Rename oddball LED pin name * Rename second oddball LED pin name * Remove another dead define |
||
|
Jonathan Bennett
|
4fd0a8276b |
Just set LED_BUILTIN universally to -1, as we don't use it. (#8830)
* Just set LED_BUILTIN universally to -1, as we don't use it. * LUD_BUILTIN workarounds * Squash the LED_BUILTINs that sneaked in * Don't kill valid pin derfine |
||
|
renovate[bot]
|
5838b26d90 |
Update lewisxhe-SensorLib to v0.3.4 (#9395)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> |
||
|
Ben Meadors
|
1a6cbb5caa |
Migrate all of the Meshtastic API attributes into the ini as a source of truth (#9214)
* Migrate all of the Meshtastic API attributes into the ini as a source of truth * Cleanup garbage coalescing * Another spot * We already account for inkhud and mui * Consolidate * Removed them * Boogers * Infer * Copying manifest should always succeed * Remove portduino guards * Rename * None |
||
|
Jorropo
|
beb268ff25 |
Revert "add a .clang-format file (#9154)" (#9172)
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit
|
||
|
Jorropo
|
0d11331d18 | add a .clang-format file (#9154) | ||
|
Ben Meadors
|
27b522b55a | Merge branch 'master' into develop | ||
|
Ben Meadors
|
7fb95841e4 | Apparently I marked board level extra on the wrong tbeam target | ||
|
Austin
|
3b968c1d58 | Update lewisxhe/SensorLib to 0.3.3 (#9061) | ||
|
Austin
|
96c42229b0 | Renovate all the things (#8994) | ||
|
Austin
|
917794ebab |
PIO: Remove useless inheritence (references extends env) (#8987)
Remove lib_deps section for all PlatformIO envs which are unneeded (only references the `extends` lib_deps, thus pointless) This makes the configs more concise and make future PIO variants/ libdeps audits easier. |
||
|
Ben Meadors
|
3b2a1547de | More board_level extras | ||
|
+15
|
1523368c53 |
adding support for the ST7796 + creating a new variant of the T-beam (#6575)
* remove duplicate HAS_LP5562 introduced by #6422
* add ST7796
* changes to get display centered+lib update
* seperated from tbeam
* forgot the simple scan case
* lowered speeds to 1/4
* added SPI Speed to constructor+ cleaned up variant.h
* even slower speeds....
* add ST7796
* changes to get display centered+lib update
* seperated from tbeam
* forgot the simple scan case
* lowered speeds to 1/4
* added SPI Speed to constructor+ cleaned up variant.h
* even slower speeds....
* changed variant name to tbeam-displayshield
* modified variant.h and merged ini file+testing on lower spi frequency for the lora module, display shield pumps out EMI?
* try higher speeds + HSPI
* cleanup of redundant code
* refelct changes?
* trunk fmt
* testing touchscreen code
* further testing
* changed to sensorlib 0.3.1
* i broke it , dont know how to fix at the moment will investigate
* add -1 functionality for touch IRQ
* revert to working example?
* it works.... is pressed was not working properly
* working touchscreen but gestures not moving display
* swap XY+ mirror X
* cleanup + addition of defines for on screen keyboard and canned message module
* removed debug lines, disabled bluetooth for now because of stack smashing protect failure
* reverted the revert #6640 + increased speed, bleutooth is stable now on reconnection cold booth etc , GPS is still not working though
* remove debug + add fixed baudrate for gps
* fmt
* revert NIMble
* changed display library to meshtastic org
* removed baudrate of 115200 and some commented out code
* Correct spelling
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Typo
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* display speed x10
* resolve conflicts
* undo
* revert speed increase CPU
* add SCREEN_TRANSITION_FRAMERATE 5
* spi speed increase of the display
* using the original touchscreen implementation
* removal of H file line
* add USE_ST7796 to missing places
* removed is pressed + interrupt
* revert changes of settings.json
* update to screen.cpp
* test identification of CST226 and CST328
* Update src/configuration.h
typo
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* made changes to detection because it was completely wrong, CST226SE has 2 posible adresses
* add merge queue
* try vars
* kerning in yaml.
* update comment
* lint etc
* touching to check grandfathering
* explicit ignores
* add WIP for Unit C6L (#7433)
* add WIP for Unit C6L
* adapt to new config structure
* Add c6l BLE and screen support (#7991)
* Minor c6l fix
* Move out of PRIVATE_HW
---------
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <Xaositek@users.noreply.github.com>
Co-authored-by: Markus <Links2004@users.noreply.github.com>
* Update Adafruit BusIO to v1.17.3 (#8018)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Update actions/checkout action to v5 (#8020)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Update actions/setup-python action to v6 (#8023)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Upgrade trunk (#8025)
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
* Update actions/download-artifact action to v5 (#8021)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Fix init for InputEvent (#8015)
* Automated version bumps (#8028)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Allow Left / Right Events for selection and improve encoder responsives (#8016)
* Allow Left / Right Events for selection and improve encoder responsives
* add define for ROTARY_DELAY
* T-Lora Pager: Support LR1121 and SX1280 models (#7956)
* T-Lora Pager: Support LR1121 and SX1280 models
* Remove ifdefs
* (resubmission) Manual GitHub actions to allow building one target or arch (#7997)
* Reset the modified files
* Fix some changes
* Fix some changes
* Trunk. That is all.
---------
Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>
* BaseUI Show/Hide Frame Functionality (#7382)
* Rename System Frame (from Memory) in code base
* Create menu options to Show/Hide frames: Node Lists, Bearings, Position, LoRa, Clock and Favorites frames
* Move Region Picker into submenu
* Tweak wording for Send Position vs Node Info if the device has GPS
* Update actions/checkout action to v5 (#8031)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Update actions/download-artifact action to v5 (#8032)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Update actions/setup-python action to v6 (#8033)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Phone GPS display on Position Screen for BaseUI (#7875)
* Phone GPS display on Position Screen
This is a PR to show when a phone shares GPS location with the node so you can reliably know what coordinate is being shared with the Mesh.
* Merge pull request #8004 from compumike/compumike/debug-heap-add-free-heap-debugging-to-all-log-lines
When `DEBUG_HEAP` is defined, add free heap bytes to every log line in `RedirectablePrint::log_to_serial`
* Feature: Seamless Cross-Preset Communication via UDP Multicast Bridging (#7753)
* Added compatibility between nodes on different Presets through `Mesh via UDP`
* Optimize multicast handling and channel mapping
- FloodingRouter: remove redundant UDP-encrypted rebroadcast suppression.
- Router: guard multicast fallback with HAS_UDP_MULTICAST and map fallback-decoded packets
to the local default channel via isDefaultChannel()
- UdpMulticastHandler: set transport_mechanism only after successful decode
* trunk fmt
* Move setting transport mechanism.
---------
Co-authored-by: GUVWAF <thijs@havinga.eu>
* Auto-favorite remote admin node
* Merge pull request #7873 from compumike/compumike/client-base-role
Add `CLIENT_BASE` role: `ROUTER` for favorites, `CLIENT` otherwise (for attic/roof nodes!)
* Fixes
* BaseUI Updates (#7787)
* Account for low resolution wide screen OLEDs
* Allow picking of Device Role and new Display Formatter for Device Role
* Add remainder of client roles to display formatter
* Don't update the role unless you pick a value
* Mascots are fun
* Fix warnings during compile time
* Improve some menus
* Mascots need to work everywhere
* Update Chirpy image
* Fix Trunk
* Update protobufs
* Add date to Clock screen
* Analog clocks love dates too
* Finalize date moves for analog clock
* Added Last Coordinate counter to Position screen (#7865)
Adding a counter to show the last time a GPS coordinate was detected to ensure the user is aware how long since the coordinate updated or to identify any errors.
* Fix
* Portduino config refactor (#7796)
* Start portduino_config refactor
* refactor GPIOs to new portduino_config
* More portduino_config work
* More conversion to portduino_config
* Finish portduino_config transition
* trunk
* yaml output work
* Simplify the GPIO config
* Trunk
* updated shebang to use a more standard path for bash (#7922)
Signed-off-by: Trenton VanderWert <trenton.vanderwert@gmail.com>
* Show GPS Date properly in drawCommonHeader (#7887)
* Commit good code that is sustainable
* Fix new build errors
* BaseUI Updates (#7787)
* Account for low resolution wide screen OLEDs
* Allow picking of Device Role and new Display Formatter for Device Role
* Add remainder of client roles to display formatter
* Don't update the role unless you pick a value
* Mascots are fun
* Fix warnings during compile time
* Improve some menus
* Mascots need to work everywhere
* Update Chirpy image
* Fix Trunk
* Update protobufs
* Add date to Clock screen
* Analog clocks love dates too
* Finalize date moves for analog clock
* Add formatting and menu picking for other GPS format options (#7974)
* Add back options for other GPS format options
* Rename variables and don't overlap elements
* Fix default value
* Should probably add a menu while I'm here!
* Shorten names just a bit to fit on screens
* Fix off by one
* Labels try to make things better
* Missed a label
* Update protobufs (#8038)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Add formatting and menu picking for other GPS format options (#7974)
* Add back options for other GPS format options
* Rename variables and don't overlap elements
* Fix default value
* Should probably add a menu while I'm here!
* Shorten names just a bit to fit on screens
* Fix off by one
* Labels try to make things better
* Missed a label
* Add a new GPS model CM121. (#7852)
* Add a new GPS model CM121.
* Add CM121 to Unicore.
* Trunk fixes, remove unneded NMEA lines
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* (resubmission) Manual GitHub actions to allow building one target or arch (#7997)
* Reset the modified files
* Fix some changes
* Fix some changes
* Trunk. That is all.
---------
Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>
* PPA: Enable Ubuntu 25.10 (questing) (#7940)
* Update Protobuf usage, add MLS, fix clock (#8041)
* Update protobufs (#8045)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Fix icon
* C6l fixes (#8047)
* fix build with HAS_TELEMETRY 0 (#8051)
* Make sure to ACK ACKs/replies if next-hop routing is used (#8052)
* Make sure to ACK ACKs/replies if next-hop routing is used
To stop their retransmissions; hop limit of 0 is enough
* Update src/mesh/ReliableRouter.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* move HTTP contentTypes to Flash - saves 768 Bytes of RAM (#8055)
* Use `lora.use_preset` config to get name (#8057)
* Update RadioLib to v7.3.0 (#8065)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Fix Rotary Encoder Button (#8001)
this fixes the Rotary Encoder Button, currenlty its not working at all.
Currently the action `ROTARY_ACTION_PRESSED` is only triggerd with a IRQ on RISING, which results in nothing since the function detects the "not longer" pressed button --> no action.
the `ROTARY_ACTION_PRESSED` implementation needs to be called on both edges (on press and release of the button)
changing the interupt setting to `CHANGE` fixes the problem.
* Add another seeed_xiao_nrf52840_kit build environment for I2C pinout (#8036)
* Update platformio.ini
* Remove some more extraneous lines
* Add heltec_v4 board. (#7845)
* add heltec_v4 board.
* Update variants/esp32s3/heltec_v4/platformio.ini
Co-authored-by: Austin <vidplace7@gmail.com>
* Limit the maximum output power.
* Trunk fixes
Fixes formatting to match meshtastic trunk linter.
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Upgrade trunk (#8078)
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
* portduino bump to fix gpiod bug (#8083)
An earlier portduino causes problems with initializing gpiod lines. This pulls in the fix.
* Handle ext. notification module things even if not enabled (#8089)
* tlora-pager wake on button, and kb backlight toggling (#8090)
* Try-fix: Unstick that PhoneAPI state (#8091)
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Also pull a deviceID from esp32c6 devices (#8092)
* Remove line from BLE pin screen, to make pin readible on tiny screens
* Fix build errors (#8067)
* Heltec V4 is 16mb
* Clear lasttoradio on BLE disconnect (#8095)
* On disconnect, clear the lastToRadio buffer
* Move it, bucko!
* Revert "Fix build errors (#8067)"
This reverts commit
|
||
|
Jonathan Bennett
|
464663b496 | GPS_POWER_TOGGLE no longer has a function, so purge (#8312) | ||
|
Austin
|
4f895f744b | Take control of our PRs! (#7445) | ||
|
Austin
|
974741a366 | ESP32: Initial sort variants by platform (#7340) |