We cache and dedupe our dependencies, referring to them with multiple methods/urls is just noise.
```
lewisxhe/XPowersLib@0.3.3
lewisxhe/SensorLib@0.3.4
```
This does *not* include any updates, just a cleanup.
Problem:
- Inserting a µSD card causes RadioLib to hit a critical error and reboot
- Device enters a boot loop as the SD card remains inserted
Reproduction:
- Insert a µSD card and power on
- RadioLib reports a critical error on boot
- Device reboots, repeating indefinitely
Root cause:
- On T-Lora Pager, SX1262 and the µSD slot share the same physical SPI bus
(same SCK/MOSI/MISO pins, differentiated only by CS)
- SDCARD_USE_SPI1 is intended for boards where SD is on a separate SPI bus;
it initializes a second ESP32 SPI peripheral (SPI3) for SD
- SPI2 is already driving those same pins for LoRa, so both controllers
simultaneously drive the same GPIO lines, causing bus contention
Fix:
- Remove SDCARD_USE_SPI1 so both devices share a single SPI peripheral (SPI2),
with CS pins providing device selection as intended
- Tested on a custom fork of device-ui; LoRa and SD card map tiles both work
correctly with an SD card inserted
Signed-off-by: Andrew Yong <me@ndoo.sg>
The Seeed Xiao S3 Kit's default GPS is an L76K which operates at 9600 baud, so when this variant was defined that baud rate was specified.
However, this is a development board and it is expected that users can attach their own devices. This includes GPS, which may operate at a different baud rate. The current fixed baud rate prevents this, so this patch removes that setting.
This will revert to the regular automatic probe method. This will successfully detect the L76K as before (the same speed as before since 9600 baud is the first baud rate checked), but also allow other GPSes at other baud rates to be detected.
Thanks to @ScarpMarc for the report
Fixes https://github.com/meshtastic/firmware/issues/9373#issuecomment-3774802763
Fixes this build error:
<command-line>: error: expected unqualified-id before '-' token
/home/<snip>/.platformio/packages/framework-arduinoespressif32/variants/esp32s3/pins_arduino.h:15:22: note: in expansion of macro 'LED_BUILTIN'
15 | static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT + PIN_RGB_LED;
| ^~~~~~~~~~~
More info: https://github.com/meshtastic/firmware/pull/9122#issuecomment-4028263894
The fix is consistent with variants/esp32s3/heltec_v3/platformio.ini
This commit is intentionally on the develop branch, because it's harmless to
develop branch, and makes us more ready for pioarduino when the time comes.
Heltec v4 introduced in: https://github.com/meshtastic/firmware/pull/7845
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add C++17 support
* Add C++17 runtime probes and update build configurations for STM32 and Portduino
* Remove unflags
* Update C++ standard flags across the platforms
* Convert a couple of instances to structured bindings
* NRF52 platform.txt to add C++17 support
* Still need the unflags apparently
* Remove C++17 runtime probe tests from test_main.cpp
* Reconfigured doesnt need a nodiscard
* Remove nodiscard attribute from init() method in RadioInterface
* Remove mbedtls/error.h from build flags
Removed include directive for mbedtls/error.h from build flags.
* Fix IRAM overflow
* Fix IRAM overflow
* Add build flag to exclude MQTT from rak11200
* Update C++ standard from gnu17 to gnu++17
* Update ESP8266Audio dependency to Meshtastic fork for compatibility
* Update ESP8266Audio dependency to Meshtastic fork for compatibility across multiple platformio.ini files
* Update Heltec Tracker v2 to version KCT8103L.
* Fixed the issue of inaccurate comments.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
P0.04 is a digital power-enable pin for the NTC/LUX sensors, not an ADC
input. The old code was calling analogRead() on a floating GPIO that
happened to read ~mid-rail, coincidentally producing reasonable
temperature values.
- Rename T1000X_VCC_PIN to T1000X_SENSOR_EN_PIN and drive it HIGH in
initVariant() for both T1000-E and T1000-S variants
- Read BATTERY_PIN (with ADC_MULTIPLIER) instead, clamped to the 3.0V
LDO output (NTC_REF_VCC) for the NTC resistance calculation
* Cardputer Kit
BMI270 WIP
* BMI270 support
* verify that the number of bytes read matches the requested length
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* trunk'd
* remove excessive logging
* Kick the screen when unsleeping
* Update the st7789 library, and enable displayon and displayoff
* Battery detection
* Default to arrow keys and enter, while in menus.
* Enable Backlight control
* Update src/detect/ScanI2CTwoWire.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* updateState method now accepts shouldRequestFocus parameter for better maintainability
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
This fixes builds in very clean environment with default build target (e.g.
-t buildfs *not* explicitly specified).
Tested: pio run -e heltec-v3
Fixes#9035
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Don't ever define PIN_LED or BLE_LED_INVERTED (#9494)
* Don't ever define PIN_LED
* Deprecate BLE_LED_INVERTED
* Add StatusMessage module and config overrides (#9351)
* Add StatusMessage module and config overrides
* Trunk
* Don't reboot node simply for a StatusMessage config update
* Missed in reviews - fixing send bubble (#9505)
* Prefer EXT_PWR_DETECT pin over chargingVolt to detect power unplugged (#9511)
* Make sure we always return a value in NodeDB::restorePreferences() (#9516)
In case FScom is not defined there is no return statement. This
moves the return outside of the ifdef to make sure a defined
value is returned.
* Inkhud battery icon improvements. (#9513)
* Inkhud battery icon improvements.
Fixes the battery icon draining from the flat side towards the bump, which is backwards from general design language seen on most devices
By request of kr0n05_ on discord, adds the ability to mirror the battery icon which fixes that issue in another way, and is also a common design seen on other devices.
* Remove option for icon mirroring
* Add border + dither to battery to prevent font overlap
* Fix trunk format
* Code cleanup, courtesy of Xaositek.
* Add reply bot module with DM-only responses and rate limiting (#9456)
* Implement Meshtastic reply bot module with ping and status features
Adds a reply bot module that listens for /ping, /hello, and /test commands received via direct messages or broadcasts on the primary channel. The module always replies via direct message to the sender only, reporting hop count, RSSI, and SNR. Per-sender cooldowns are enforced to reduce network spam, and the module can be excluded at build time via a compile flag. Updates include the new module source files and required build configuration changes.
* Update ReplyBotModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/ReplyBotModule.h
Match the existing MESHTASTIC_EXCLUDE_* guard pattern so the module is excluded by default.
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/ReplyBotModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Tidying up
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* HotFix for ReplyBot - Modules.cpp included and moved configuration.h (#9532)
* Undefine LED_BUILTIN (#9531)
Keep variant in sync with
https://github.com/meshtastic/firmware/commit/df40085
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add agc reset attempt (#8163)
* Add agc reset attempt
* Add radioLibInterface include
* Trunk
* AGC reset don't crash, don't naively call
* Update src/main.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Use Throttle function
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Remove unused hmx variable (#9529)
The variable is not used at all in the function, remove it to
silence the compiler warning.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Rename LED_PIN to LED_POWER, move handling out of main to dedicated module (#9512)
* Rename LED_PIN to LED_POWER, move handling out of main to dedicated module
* Misc
* Remove errant endif
* Fix hop_limit upgrade detection (#9550)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* meshtasticd: Fix install on Fedora 43 (#9556)
* RPM: Include meshtasticd-start.sh (#9561)
* Add Slash Key to VirtualKeyboard (#9563)
Addition of ? and / to the virtual Keyboard via short and long press
* Add support for CW2015 LiPo battery fuel gauge (#9564)
* Add support for CW2015 LiPo battery fuel gauge
* Address Copilot's concerns, minor fixups
* Make LED_POWER blip even in critical battery (#9545)
* Enable FORTIFY and SP for native builds (#9537)
* Enable FORITFY and NX for native builds
meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack.
This gives the following improvements on Debian Trixie:
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd
Tested with --sim mode I do not get any crashes or similar.
* Enable FORTIFY and NX for native builds
meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack.
This gives the following improvements on Debian Trixie:
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd
Tested with --sim mode I do not get any crashes or similar.
* Enable FORTIFY and SP for native builds
meshtasticd does have a stack canaries and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and stack canaries.
This gives the following improvements on Debian Trixie:
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd
Tested with --sim mode I do not get any crashes or similar.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update built-in documentation for current method of implementation (#9592)
* Refactor logging in ProtobufModule to ensure message details are logged after successful decoding (#9536)
* Automated version bumps (#9604)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Add missing openocd_target to custom nrf52 boards (#9603)
This stops platformio complaining about `Missing target configuration for me25ls01-4y10td` etc when trying to flash with nrfutil.
* Add sdl libs for native builds (#9595)
* Add sdl libs for native builds
* Alpine try again
* fix some random compiler warnings (#9596)
* Modify the dependency library of v4-tft (#9507)
* BaseUI: Favorite Screen Signal Quality improvement (#9566)
* Favorite Signal Quality improvement
* Show Voltage if node shares it.
* Trunk Fix
* Change Favorite tittle to encase name with Asterisks
* Add Pluggin In condition for Battery Line
* Adjust getUptimeStr Prefixes
* Create isAPIConnected for SharedCommon usage
* Correct leftSideSpacing to account for isAPIConnected
---------
Co-authored-by: Jason P <applewiz@mac.com>
* ExternalNotification and StatusLED now call AmbientLighting to update… (#9554)
* ExternalNotification and StatusLED now call AmbientLighting to update RGB LEDs. Add optional heartbeat
* Don't overwrite RGB state if heartbeat is disabled.
* Use the right define
* Remove another .h and make rgb static
* move rgb objects into AmbientLighting class
* Straighten out AmbientLighting Thread object
* Use %f for floats
* Fixes on SCD4X admin comands (#9607)
* Fixes on SCD4X admin comands
* Minor fix in logs for SEN5X
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* feat/add sfa30 (#9372)
* Move PMSA003I to separate class and update AQ telemetry
* AirQualityTelemetry module not depend on PM sensor presence
* Remove commented line
* Fixes on PMS class
* Add missing warmup period to wakeUp function
* Fixes on compilation for different variants
* Add functions to check for I2C bus speed and set it
* Initial implementation for SFA30Sensor
* Move PMSA003I to separate class and update AQ telemetry
* AirQualityTelemetry module not depend on PM sensor presence
* Remove commented line
* Fixes on PMS class
* Add missing warmup period to wakeUp function
* Fixes on compilation for different variants
* Add functions to check for I2C bus speed and set it
* Add ScreenFonts.h
Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>
* PMSA003I 1st round test
* Fix I2C scan speed
* Fix minor issues and bring back I2C SPEED def
* Remove PMSA003I library as its no longer needed
* Add functional SCD4X
* Fix screen frame for CO2
* Add admin commands to SCD4X class
* Add further admin commands and fixes.
* Remove unused I2C speed functions and cleanup
* Cleanup of SEN5X specific code added from switching branches
* Remove SCAN_I2C_CLOCK_SPEED block as its not needed
* Remove associated functions for setting I2C speed
* Unify build epoch to add flag in platformio-custom.py (#7917)
* Unify build_epoch replacement logic in platformio-custom
* Missed one
* Fix build error in rak_wismesh_tap_v2 (#7905)
In the logs was:
"No screen resolution defined in build_flags. Please define DISPLAY_SIZE."
set according to similar devices.
* Put guards in place around debug heap operations (#7955)
* Put guards in place around debug heap operations
* Add macros to clean up code
* Add pointer as well
* Cleanup
* Fix memory leak in NextHopRouter: always free packet copy when removing from pending
* Formatting
* Only queue 2 client notification
* Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak
Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap
* Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak
Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap
* Update protobufs (#7973)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* T-Lora Pager: Support LR1121 and SX1280 models (#7956)
* T-Lora Pager: Support LR1121 and SX1280 models
* Remove ifdefs
* Trunk
* Trunk
* Static memory pool allocation (#7966)
* Static memory pool
* Initializer
* T-Lora Pager: Support LR1121 and SX1280 models (#7956)
* T-Lora Pager: Support LR1121 and SX1280 models
* Remove ifdefs
---------
Co-authored-by: WillyJL <me@willyjl.dev>
* Portduino dynamic alloc
* Missed
* Drop the limit
* Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Fix json report crashes on esp32 (#7978)
* Tweak maximums
* Fix DRAM overflow on old esp32 targets
* Guard bad time warning logs using GPS_DEBUG (#7897)
In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy.
In combination, these result in a spamming of the logs when a bad time is found
When the GPS is active, we're calling the GPS thread every 0.2secs.
So this log could be printed 4,500 times in a no-lock scenario :)
Reserve this experience for developers using GPS_DEBUG.
Fixes https://github.com/meshtastic/firmware/issues/7896
* Scale probe buffer size based on current baud rate (#7975)
* Scale probe buffer size based on current baud rate
* Throttle bad time validation logging and fix time comparison logic
* Remove comment
* Missed the other instances
* Copy pasta
* Fix GPS gm_mktime memory leak (#7981)
* Fix overflow of time value (#7984)
* Fix overflow of time value
* Revert "Fix overflow of time value"
This reverts commit 0847969201.
* That got boogered up
* Remove PMSA003 include from modules
* Add flag to exclude air quality module
* Rework PMSA003I to align with new I2C scanner
* Reworks AQ telemetry to match new dynamic allocation method
* Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements
* Reworks PMSA003I
* Move add sensor template to separate file
* Split telemetry on screen options
* Add variable I2C clock compile flag
* Added to Seeed Xiao S3 as demo
* Fix drawFrame in AQ module
* Module settings override to i2cScan module function
* Move to CAN_RECLOCK_I2C per architecture
* Add reclock function in TelemetrySensor.cpp
* Add flag in ESP32 common
* Minor fix
* Move I2C reclock function to src/detect
* Fix uninitMemberVar errors and compile issue
* Make sleep, wakeUp functions generic
* Fix STM32 builds
* Add exclude AQ sensor to builds that have environmental sensor excludes
* Add includes to AddI2CSensorTemplate.h
* SEN5X first pass
* WIP Sen5X functions
* Further (non-working) progress in SEN5X
* WIP Sen5X functions
* Changes on SEN5X library - removing pm_env as well
* Small cleanup of SEN5X sensors
* Minor change for SEN5X detection
* Remove dup code
* Enable PM sensor before sending telemetry.
This enables the PM sensor for a predefined period to allow for warmup.
Once telemetry is sent, the sensor shuts down again.
* Small cleanups in SEN5X sensor
* Add dynamic measurement interval for SEN5X
* Only disable SEN5X if enough time after reading.
* Idle for SEN5X on communication error
* Cleanup of logs and remove unnecessary delays
* Small TODO
* Settle on uint16_t for SEN5X PM data
* Make AQTelemetry sensors non-exclusive
* Implementation of cleaning in FS prefs and cleanup
* Remove unnecessary LOGS
* Add cleaning date storage in FS
* Report non-cumulative PN
* Bring back detection code for SEN5X after branch rebase
* Add placeholder for admin message
* Add VOC measurements and persistence (WIP)
* Adds VOC measurements and state
* Still not working on VOC Index persistence
* Should it stay in continuous mode?
* Add one-shot mode config flag to SEN5X
* Add nan checks on sensor data from SEN5X
* Working implementation on VOCState
* Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h)
* Adds conditions for stability and sensor state
* Fixes on VOC state and mode swtiching
* Adds a new RHT/Gas only mode, with 3600s stabilization time
* Fixes the VOCState buffer mismatch
* Fixes SEN50/54/55 model mistake
* Adapt SEN5X to new sensor list structure. Improve reclock.
* Improve reClockI2C conditions for different variants
* Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery
* Add SEN5X
* Fix merge errors
* Small reordering in PMS class for consistency
* If one sensor fails, AQ telemetry still reports data
* Small formatting fix
* Add SEN5X to AQI in ScanI2C
* SCD4X now part of AQ module with template list
* Fixes difference between idle and sleep
* In LowPower, sleep is disabled
* Requires testing for I2C clock comms for commands
* Remove unnecessary import
* Add co2 to serialized AQ metrics
* Add SFA30 with new sensor template in AQ module
* Update library dependencies in platformio.ini
* Fix unitialized variables in SEN5X constructor
* Fix missing import
* Fix uninitMemberVars
* Fix import error for SCD4X
* Fix I2CClock logic
* Fix not reclocking back to 700000Hz
* Fix multiple sensors being read simultaneously
* The logic in AQ module is different to the one in EnvironmentTelemetryModule. In Env module, if any sensor fails to getMetrics, no valid flag for the module. This prevents other sensors to report data.
* Fix pending clock change in PMSA003
* Cleanup of SEN5X class
* Exclude AQ sensor from wio-e5 due to flash limitations
* Fix I2C clock change logic
* Make sure clock is always set to needed value
* Fix returns
* Fix trunk
* Fix on condition in reclock
* Fix trunk
* Final SFA30 class implementation
* Add HCHO to screen and improve logs
* Add metrics to mesh packet serializer
* Minor fixes in logs
* OCD tidy up of logs
* Fix sleep function
* Remove old I2C_CLOCK_SPEED code
---------
Co-authored-by: nikl <nikl174@mailbox.org>
Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>
Co-authored-by: Nashui-Yan <yannashui10@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: WillyJL <me@willyjl.dev>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Log rxBad PacketHeaders with more info (id, relay_node) like printPacket, so we can try to match RX errors to other packets in the logs. (#9614)
* Exclude status message module
* fix: zero entire public key array instead of only first byte (#9619)
* Update protobufs (#9621)
* Xiao NRF - define suitable i2c pins for the sub-variants (#8866)
Co-authored-by: Christian Walther <cwalther@gmx.ch>
* Update src/detect/ScanI2C.cpp
Co-authored-by: Wessel <wessel@weebl.me>
* Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp
Co-authored-by: Wessel <wessel@weebl.me>
* Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp
Co-authored-by: Wessel <wessel@weebl.me>
* Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp
Co-authored-by: Wessel <wessel@weebl.me>
* Update src/mesh/NodeDB.cpp
Co-authored-by: Wessel <wessel@weebl.me>
* convert GPS global and some new in gps.cpp to unique_ptr (#9628)
Trying this to see if anything bad happen if I were to replace most raw pointers with unique_ptr.
I didn't used std::make_unique since it is only supported in C++14 and onwards but until we update esp32 to arduino 3.x the ESP32 xtensa chips use a C++11 std.
* replace delete in RedirectablePrint.cpp with std::unique_ptr (#9642)
Is part of the unique_ptr modernization effort.
* replace delete in EInkDynamicDisplay.{cpp,h} with std::unique_ptr (#9643)
Is part of the unique_ptr modernization effort.
* Undefine LED_BUILTIN for Heltec v2 variant (#9647)
* Undefine LED_BUILTIN for Heltec v2 variant
* Undefine LED_BUILTIN for Heltec v2.1 variant
---------
Co-authored-by: Jorropo <jorropo.pgm@gmail.com>
* replace delete in RadioInterface.cpp with std::unique_ptr (#9645)
Is part of the unique_ptr modernization effort.
* fix typo in PIN_GPS_SWITCH (#9648)
Wasn't caught by CI.
* replace delete in CryptoEngine.{cpp,h} with std::unique_ptr (#9649)
Is part of the unique_ptr modernization effort.
* workaround NCP5623 and LP5562 I2C builds (#9652)
Theses two appear to be buggy on r1-neo and nomadstar meteor pro, they rely on Wire.h being included previously to their import.
Idk why other platforms using the same smart LEDs are working while theses ones don't.
This should make CI green on the dev branch.
* replace delete in AudioThread.h with std::unique_ptr (#9651)
Is part of the unique_ptr modernization effort.
* Add USB_MODE=1 for Station G2 (#9660)
* InkHUD: Favorite Map Applet (#9654)
* fix a lot of low level cppcheck warnings (#9623)
* simplify the observer pattern, since all the called functions are const getters.
* use arduino macro over std: for numerical values and refactor local variables in drawScrollbar()
* oh, so Cppcheck actually complained about const pointers not being const.
* slowly getting out of ifdef hell
* fix inkHUD warnings as well
* last 2 check warnings
* git checks should fail on low defects from now on
* Feat/add scd30 (#9609)
* Merge develop into SCD30
* Add SCD30 class
* Fix logging and admin commands
* Minor cleanup and logging improvements
* Minor formatting issue
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Improvements on setTemperature
* Fix casting float-uint16_t
* Pass 100 for resetting temperature offset
* Fix issues pointed out by copilot
* Add quick reboot to set interval quicker on scd30
* Change saveState to only happen after boot and minor log changes
* Fix missing semicolon in one shot mode log
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* fix: respect DontMqttMeBro flag regardless of channel PSK (#9626)
The previous PSK check was broken from its introduction in #4643 —
memcmp was used in boolean context without comparing to 0, inverting
the condition. Since no one noticed for over a year, the PSK-based
filtering provided no practical value. Simplifying to always respect
the sender's preference is both more correct and easier to reason about.
* our firmware action is too clever
Update pio_target and add pio_opts for checks.
* fix detection of SCD30 by checking if the size of the return from a 2 byte register read is correct (#9664)
* fix detection of SCD30 by checking if thee size of the return from a 2 byte register read is correct
fix signedness warning in PMSA003 sensor code.
* Add alternate path for LPS22HB
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* check EndTransmission for errors and compare returned length to expected value
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* #9623 resolved a local shadow of next_key by converting it to int. (#9665)
* zip a few gitrefs down (#9672)
* InkHUD: Allow non-system applets to subscribe to input events (#9514)
* Allow inkhud user applets to consume inputs with opt-in system
Adds a way for applets to subscribe to input events while keeping it off
by default to preserve compatibility and expected behaviours. Adds
example for use as well.
* Add check for nullptr on getActiveApplet uses
* Remove redundant includes
* Move subscribedInputs to protected
* More consistent naming scheme
* Fake IAQ values on Non-BSEC2 platforms like Platformio and the original ESP32 (#9663)
* BSEC2 Replacement
- add approximation for IAQ to non-BSEC2 platforms.
- Re-add this sensor to ESP32 targets, and refactor env_extra includes.
- Fix C++ 11 compatibility
* Check for gas resistance 0
* ULED_BUILTIN for 9m2ibr_aprs_lora_tracker (#9685)
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de>
Co-authored-by: Vortetty <33466216+Vortetty@users.noreply.github.com>
Co-authored-by: Mattatat25 <108779801+mattatat25@users.noreply.github.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Max <rekin.m@gmail.com>
Co-authored-by: Colby Dillion <colby.dillion@pacshealth.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom <116762865+NomDeTom@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Chloe Bethel <chloe@9net.org>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: oscgonfer <oscgonfer@users.noreply.github.com>
Co-authored-by: nikl <nikl174@mailbox.org>
Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>
Co-authored-by: Nashui-Yan <yannashui10@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu>
Co-authored-by: WillyJL <me@willyjl.dev>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Wessel <wessel@weebl.me>
Co-authored-by: Christian Walther <cwalther@gmx.ch>
Co-authored-by: Jorropo <jorropo.pgm@gmail.com>
Co-authored-by: Eric Barch <ericb@ericbarch.com>
Co-authored-by: Clive Blackledge <clive@ansible.org>
* Allow inkhud user applets to consume inputs with opt-in system
Adds a way for applets to subscribe to input events while keeping it off
by default to preserve compatibility and expected behaviours. Adds
example for use as well.
* Add check for nullptr on getActiveApplet uses
* Remove redundant includes
* Move subscribedInputs to protected
* More consistent naming scheme
* simplify the observer pattern, since all the called functions are const getters.
* use arduino macro over std: for numerical values and refactor local variables in drawScrollbar()
* oh, so Cppcheck actually complained about const pointers not being const.
* slowly getting out of ifdef hell
* fix inkHUD warnings as well
* last 2 check warnings
* git checks should fail on low defects from now on
