* Package meshtasticd for Windows as an MSI
Adds a --service flag connecting meshtasticd to the Service Control
Manager, a WiX MSI installing it as an auto-start LocalSystem service with
config in %ProgramData%\Meshtastic, and a CI step attaching the MSI to
releases.
* Address review comments
Bind workflow expressions to env vars in run: bodies, and build the
service status per call with an atomic checkpoint.
* Fix service stop state and CI lint
Latch the stop under a mutex so a startup report cannot walk the state
back. Ignore the new workflows in semgrep and checkov, as main_matrix
already is.
* Drop the checkov ignore for the winget workflow
Resolve the newest release inside the job instead of taking
workflow_dispatch inputs, so CKV_GHA_7 no longer fires and checkov stays
active on the file.
* Carry the MSI architecture into the winget manifest
Parse it from the asset name instead of defaulting to x64, and fail on a
multi-arch release rather than validating one at random.
* Restore release/.gitignore
* Leave the main matrix alone
Release attachment moves to the matrix rework in #11151. The MSI is still
built and uploaded as a CI artifact.
---------
Co-authored-by: Austin <vidplace7@gmail.com>
* add LR 2021 to portduino, and allow Framebuffer devices to rotate the screen from config. Requires https://github.com/meshtastic/device-ui/pull/355 and supersedes https://github.com/meshtastic/firmware/pull/10567 and https://github.com/meshtastic/firmware/pull/11138
Many thanks to the original authors https://github.com/a-li3n and https://github.com/jessm33
* Build LR2021Interface.cpp in the wasm env
initLoRa() constructs LR2021Interface for Lora.Module: lr2021, so excluding
the file from the native-wasm source filter left the constructor undefined at
link time. LR20x0Interface.cpp stays excluded; it is template-only and comes in
via the InterfacesTemplates.cpp amalgamation.
Also replace the non-UTF-8 degree signs in the framebuffer rotation comment and
correct the rfswitch alias cleanup comment.
* Trim comments
* Report setenv failure for the framebuffer rotation
* Add explicit presence for MeshPacket.rx_time (arrival time)
rx_time is now proto3 optional with a has_rx_time presence bit, matching
the rx_rssi treatment. A node with no GPS and no phone connected yet has
no time source at all, so a bare 0 was indistinguishable from a genuine
1970-01-01 reading; downstream consumers (replay packets, JSON
serialization) now check has_rx_time instead of the value.
* Dedupe rx_time stamping into a shared helper; trim a debug log string
Extract the repeated haveTime/rx_time/has_rx_time stamp logic (5 call
sites across Router.cpp, MeshBeaconModule.cpp, MeshService.cpp) into
Router::computeRxTimeStamp()/stampRxTime(). Also shorten the new RTC.cpp
LOG_DEBUG string. Saves 48 bytes of flash on rak4631 (measured), no
behavior change.
* Fix has_rx_rssi presence carried unconditionally through StoreForward replay
preparePayload() set has_rx_rssi = true unconditionally on replay, regardless
of whether the packet's rx_rssi at store time was a genuine measurement (e.g.
MQTT-relayed packets carry no real RSSI). Store the presence bit alongside
rx_rssi in PacketHistoryStruct and restore it on replay instead.
Flagged by Copilot on #11271 (same root cause the has_rx_time explicit
presence work fixes) but never addressed before that PR merged.
* Trim comment blocks to the repo's 1-2 line guideline
.github/copilot-instructions.md:338 caps code comments at 1-2 lines; several
blocks added across the rx_time explicit-presence work ran well past that.
Also consolidates Time.cpp's file-level doc comment into Time.h, where the
rest of the Time:: API contract already lives.
No behavior change.
* Add rx_time explicit-presence test coverage
- test_meshpacket_serializer: has_rx_time=false fixture plus tests asserting
JsonSerialize/JsonSerializeEncrypted emit 0 rather than leaking the
millis() placeholder, alongside the has_rx_time=true baseline.
- test_stream_api: two tests driving a real PhoneAPI handshake (want_config_id
through STATE_SEND_PACKETS) that simulate a phone time-giving transaction
arriving before vs. after a queued packet is drained - covering both the
reconciled and the ships-with-placeholder-absent paths of
MeshService::reconcilePendingRxTimes().
* Fix three correctness issues flagged in review
- Time.h: drop the reserved-identifier include guard (_MT_TIME_H); pragma
once already covers it, matching convention elsewhere (e.g. RTC.h).
- Time.cpp: rebase getMillis64()'s wrap accumulator when the test seam
swaps clock sources, so a real<->injected clock jump isn't miscounted
as a genuine 32-bit wrap.
- NodeInfoModule: the 12h reply-suppression window is a local dedup
duration, not a wall-clock reading - switch it to Time::getMillis64()
so RTC-quality jumps and replayed packets' stale rx_time can't perturb
it.
- StoreForwardModule: has_rx_time was derived from *current* RTC quality
at replay time rather than stored at capture time, so a history entry
saved while time-blind could be misreported as a valid epoch once the
clock later improved. Persist the presence bit in PacketHistoryStruct
instead.
* tryfix CI
* post review fixes
* more test fixes
* Snake!
* Add spiLock to snake score saving
* Check fixes
* More careful locking
* WIP: Big Display Node
* Update src/graphics/HUB75Display.cpp
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* Add HUB75 Native
* Add Tetris game module with core logic and UI integration
- Implement TetrisGame class for game logic, including piece movement, rotation, and line clearing.
- Create TetrisModule class to manage game state, input handling, and rendering on OLED display.
- Introduce high score tracking with persistence and optional mesh broadcasting.
- Define UI states for title, playing, paused, game over, and high scores.
- Implement input handling for game controls and state transitions.
- Add rendering functions for the game board, high scores, and title screen.
* feat(snake): add snake graphics and update display logic in SnakeModule
* Prompt for Initials for Tetris, too
* refactor games module
* Games refactor
* hub75 native double buffer
* Games tuning
* Make joystick repeat events on held button
* Add clouds and colors
* Fix breakout and more color
* difficulty tuning
* trunk
* refactor game announcements, etc
* Scale chirpy gravity as game speed increases
* Portduino, check for hub75 display before reading in hub75 options
* Final(?) games tuning
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Properly ignore input when games screen not shown
* Fail gracefully when HUB75 is selected but not supported.
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
Co-authored-by: Ixitxachitl <kramerfm@gmail.com>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Add MemAudit: per-subsystem heap accounting in the boot log
The 2.8.0 nRF52840 heap-exhaustion field reports had to be diagnosed by
hand, reconstructing each subsystem's heap footprint from source and
build flags one report at a time. This makes every future report
self-diagnosing from the serial log: a tiny fixed-size registry
(src/memory/MemAudit.*) that big long-lived allocations report into,
printed as one line at the end of setup() and alongside the periodic
"Heap free:" log:
MemAudit[boot]: tmm=2500 warm=4000 pkthist=5824 nodedb=13440
msgstore=2200 pktpool(live)=3270 total=31234
Instrumented: NodeDB hot vector (nodedb) + satellite maps (satmaps,
rb-tree overhead estimated), WarmNodeStore (warm), PacketHistory records
and hash index (pkthist), TrafficManagement caches (tmm/tmm_ni),
MessageStore text pool (msgstore), TFT line/repaint buffers (display),
and live in-flight packets (pktpool(live)) via an optional audit tag on
the packet pool allocator - the one hot path, counted with a relaxed
32-bit atomic add (single instructions on Cortex-M, no locks).
Cost: 128 B RAM for the 16-tag table, well under 1 KB flash on rak4631.
MESHTASTIC_MEM_AUDIT=0 compiles it out to inline no-op stubs (call
sites need no ifdefs); STM32WL, the tightest flash target, defaults off.
New native suite test_mem_audit covers add/set/snapshot arithmetic, tag
reuse (pointer and cross-TU strcmp fallback), null/unknown tags, and
table-full behavior; test/native-suite-count bumped to 28.
* native-wasm: add src/memory/ to the curated source filter
The wasm env denies all sources and adds an explicit file list; MemAudit
callers (main, MeshService, NodeDB, PacketHistory) are in that list but
src/memory/MemAudit.cpp was not, so wasm-ld failed on undefined
memaudit:: symbols.
Audit of the XEdDSA packet-signing implementation (#10478) surfaced several
issues in when unsigned packets are accepted on receive or emitted on send.
This fixes them and adds regression coverage.
- Unicast NodeInfo exchange no longer breaks against signer nodes: the
NodeInfoModule downgrade drop is gated to broadcasts, since senders never
sign unicast (want_response replies, directed exchanges).
- Replace the payload-size sign heuristic with an exact encoded-size gate
(signedDataFits) and mirror it on the receive side, removing a dead band
where 167-168 B broadcasts were signed then failed TOO_LARGE.
- Extract the receive policy into checkXeddsaReceivePolicy() and apply it to
plaintext-MQTT decoded downlink, which previously skipped signature
verification and downgrade protection entirely.
- Reject signatures whose length is neither 0 nor 64 as malformed, so a
crafted partial signature can't inflate the size estimate and dodge the
unsigned-downgrade drop.
- Hold cryptLock on the MQTT verify path (shared Ed25519 key cache).
- Clear any client-preset signature on packets we originate, on all builds.
- Randomized (hedged) signing per the Signal XEdDSA spec: bump the
meshtastic/Crypto pin to the build where XEdDSA::sign mixes 32 bytes of
caller randomness into the nonce as Z (meshtastic/Crypto#3), and seed those
bytes in xeddsa_sign from HardwareRNG (checked, with a seeded-CSPRNG
fallback). test_crypto pins that repeated signs differ and both verify.
Adds test coverage: test_packet_signing groups A-E (receive matrix, send
policy, NodeInfo backstop, encoding invariants, decoded-ingress policy),
test_mqtt end-to-end downlink cases, and a test_crypto randomization check.
* Add ARCH_PORTDUINO_WASM build: meshtasticd in WebAssembly over WebUSB
Compile the full portduino firmware to WebAssembly (Emscripten) so a real node runs in a browser tab or headless Node, driving a LoRa radio over WebUSB through a CH341 — the desktop Ch341Hal path with its libusb backend swapped for a WebUSB one. The native/desktop portduino build is unchanged.
New build env under src/platform/portduino/wasm/ (excluded from the native build_src_filter): WebUSB libpinedio backend, config/FS/region/MAC/PhoneAPI glue, wasm setup/loop, JS WebUSB runtime, and build stubs. bin/build-portduino-wasm.sh runs a standalone cached emcc build to build/wasm/meshnode.{mjs,wasm}.
Six firmware sources gain #ifdef ARCH_PORTDUINO_WASM guards (single-threaded cooperative emscripten_sleep loop, continuous RX, US region default, std RNG, no-popen exec); none affect non-wasm builds.
* PortDuino WASM: CI build job, cross-platform libdeps, configurable adapter
bin/build-portduino-wasm.sh: auto-detect native-macos (macOS) vs native (Linux/CI) libdeps with a NATIVE_ENV override, and use the SAME env's Crypto with an XEdDSA-present guard. Drops the heltec-v3/Crypto borrow — the meshtastic/Crypto pin already ships XEdDSA; the native libdeps cache was just stale. No env pin change.
Add .github/workflows/build_portduino_wasm.yml: build the ARCH_PORTDUINO_WASM target in CI (ubuntu + emsdk, native libdeps) so it can't silently bit-rot; asserts build/wasm/meshnode.{mjs,wasm}.
src/platform/portduino/wasm: add wasm_set_lora_* setters so the JS host can configure any CH341 LoRa adapter (module, USB ids, DIO/TCXO, SPI speed, pins); wasm_config_apply falls back to the MeshToad defaults when unset.
* WASM: build as a first-class [env:wasm] via platform-wasm (retire emcc script)
Replace the standalone emcc build (bin/build-portduino-wasm.sh) with a normal
PlatformIO env, `pio run -e wasm`, using the new meshtastic/platform-wasm
platform (emcc/em++ + Asyncify, the WASM sibling of platform-native). The
portduino WebAssembly node is now built the same way as every other target.
- variants/native/portduino/platformio.ini: add [env:wasm] (platform pinned to
platform-wasm, board wasm). Translates the script's source set into a curated
build_src_filter, the ~30 EXCLUDE_* defines, and the lib set; defines
ARCH_PORTDUINO_WASM in-repo so correctness doesn't hinge on the platform's
board.json.
- extra_scripts/wasm_link_flags.py: the firmware-specific emcc *link* settings
(EXPORT_NAME, EXPORTED_RUNTIME_METHODS, EXPORTED_FUNCTIONS, ASYNCIFY_IMPORTS).
PlatformIO feeds build_flags to compile only, so these must ride LINKFLAGS;
without it the WebUSB Asyncify seam and the JS host's runtime methods are
dropped (the _wasm_* exports survive only via EMSCRIPTEN_KEEPALIVE).
- PortduinoGlue.{h,cpp}: guard the yaml-cpp dependency out of the WASM build
(#ifndef ARCH_PORTDUINO_WASM around the include, emit_yaml/loadConfig/
readGPIOFromYaml). The browser node configures via the wasm_set_lora_* setters
and dead-strips the YAML path; this drops the host yaml-cpp build dependency
entirely. Native is unchanged (guards are inert there).
- portduino_glue_wasm.cpp / portduino_main_wasm.cpp: repair EM_ASM JS that a
formatter had mangled (!== -> != =, regex split) in the prior landing; the
emcc link succeeds regardless, so CI now runs `node --check meshnode.mjs`.
- .github/workflows/build_portduino_wasm.yml: build via `pio run -e wasm`
(artifacts under .pio/build/wasm/), trigger on the shared inputs the env
inherits (root platformio.ini, bin/platformio-*.py).
- NodeDB.cpp: drop the dead ARCH_PORTDUINO_WASM region-default branch (region
now defaults the same as native).
- Crypto renovate pins: add the missing gitBranch so they track upstream.
Output: .pio/build/wasm/meshnode.{mjs,wasm} (ES module, factory createMeshNode).
Verified: pio run -e wasm (against the published platform archive), node --check,
module instantiates in Node with all exports; native-macos + Docker native unit
tests (450/450) still pass.
* Fix name on the Piggystick
* wasm: pin platform-wasm at the GPL-3.0-relicensed commit
platform-wasm's LICENSE was always GPLv3 (matching this firmware), but its
platform.json/README still declared Apache-2.0 (mis-copied from platform-native).
That's fixed upstream in b83fa5b; bump the [env:wasm] pin to it. Build output is
unchanged (license metadata only). Verified: pio run -e wasm against b83fa5b.
* wasm: make reboot() actually restart the node (was a no-op)
In wasm the reboot path is live (main.cpp -> Power::powerCommandsCheck ->
Power::reboot), but Power::reboot's ARCH_PORTDUINO arm tore down SPI/Wire/Serial
and then called the no-op ::reboot() stub — leaving the node running with a dead
radio until the tab was manually reloaded. Triggers include an admin/phone
reboot, factory reset, the "reconfigure failed" path, and the 60 s stuck-TX
hardware watchdog (RadioLibInterface).
- Power::reboot(): add an ARCH_PORTDUINO_WASM arm (before ARCH_PORTDUINO, since
the wasm build defines both) that skips the host teardown and just calls
::reboot(). notifyReboot already let modules persist.
- ::reboot() (glue): hand off to the JS host — browser reloads the tab (NodeDB
state survives via IDBFS, same identity returns); headless calls Module.onReboot
if provided, else logs. Loose !=/== so clang-format doesn't mangle the EM_ASM JS.
- README: document the reboot handoff + the Module.onReboot hook.
Verified: pio run -e wasm + node --check (EM_ASM intact); native-macos unaffected.
* wasm: rename env to native-wasm and run it in the main CI matrix
Rename [env:wasm] -> [env:native-wasm] for consistency with the portduino
native family (native, native-macos, native-tft). The build dir follows to
.pio/build/native-wasm/ (artifact is still meshnode.{mjs,wasm}); the PIOENV
guard in extra_scripts/wasm_link_flags.py, the README, and the companion wrapper
move with it. The board stays `wasm`.
Also wire the build into normal CI: build_portduino_wasm.yml becomes a reusable
workflow (workflow_call) invoked as the `build-wasm` job of main_matrix.yml, so
the WebAssembly node is built like every other platform instead of on a separate
path trigger.
* native-wasm: auto-locate the Emscripten SDK (pre-build script)
`pio run -e native-wasm` failed with "emcc not found" whenever it was invoked
from a shell that hadn't sourced emsdk_env.sh — a VS Code task, an IDE build
button, a bare terminal. Add a pre: extra script that probes the usual emsdk
locations ($EMSDK_ENV, $EMSDK, ~/emsdk, ./.emsdk, the sibling companion
checkout), sources emsdk_env.sh, and imports the resulting environment so the
platform builder and emcc see PATH/EMSDK/EM_CONFIG. No-op when emcc is already
reachable (CI), silent when no SDK is found (the platform emits its own error).
* wasm: address PR review feedback
- js/bridge.js: import CH341 from "./ch341.js" (sibling in this layout), not
"../src/ch341.js" which doesn't resolve here.
- js/ch341.js: a zero-length transferIn while MISO bytes are still outstanding
now throws instead of breaking out with a partially-filled buffer — silent SPI
corruption becomes a loud error, matching the comment above it.
- libpinedio_webusb.c: webusb_set_auto_cs honors the AUTO_CS option (? 1 : 0)
instead of the always-on ? 1 : 1. Runtime behavior is unchanged — Ch341Hal sets
AUTO_CS=0 right after pinedio_init (RadioLib drives the active-low NSS); the
option just isn't set yet at init, so this now correctly defaults off.
- SX126xInterface.cpp: the RX-start error log now names the method actually
called (startReceive vs startReceiveDutyCycleAuto) instead of hardcoding the
duty-cycle name in the WASM branch.
* native-wasm: drop the emsdk bootstrap shim (now in platform-wasm)
The Emscripten SDK auto-location moved into the platform-wasm builder, so the
firmware no longer needs its own pre: extra script. Remove
extra_scripts/wasm_emsdk_env.py and bump the platform pin to the build that
carries the bootstrap. The wasm_link_flags.py post script stays — those exported
fns / runtime methods / Asyncify import seam are firmware-app-specific.
* wasm: use the canonical companion name (meshtasticd-wasm-node)
The companion repo was renamed meshtastic-web-node -> meshtasticd-wasm-node; fix
the stale name in the wasm README and bump the platform pin to the build that
promotes the canonical name in its emsdk auto-location.
* wasm: re-entrancy guard for the API/region entry points + flaky-open retry
Two robustness fixes for the browser node:
- Re-entrancy guard. The node is single-threaded + Asyncify: while setup()/loop()
is suspended inside a WebUSB transfer, the JS event loop is free, so a stray
DOM/timer callback that re-enters a wasm_* entry point starts a second Asyncify
unwind ("async operation already in flight" abort) or clobbers shared PhoneAPI
state (observed as a "PhoneAPI::available unexpected state" flood). Add a
g_wasm_in_firmware flag set around setup()/loop() (portduino_main_wasm.cpp); the
wasm_set_region / wasm_api_to_radio / wasm_api_from_radio / wasm_api_available
entry points now reject a mid-tick call (return busy) instead of corrupting or
aborting. The host must still call them between ticks — this is the safety net
the design lacked, not a substitute for the JS queue.
- CH341 open retry (js/bridge.js). First-connect WebUSB is flaky — the interface
is briefly unclaimable right after the grant, or held by a prior session,
giving a transient "Could not open SPI: -1". Retry the open with a short
backoff, closing the device between attempts so claimInterface starts clean.
* wasm: exclude emscripten-only sources from cppcheck
The `check` board matrix runs `pio check` (cppcheck) over all of src/,
including src/platform/portduino/wasm/. cppcheck can't parse the EM_ASYNC_JS/
EM_JS macros (Syntax Error: AST broken at libpinedio_webusb.c:39,
internalAstError) and these sources are not part of any checked board build
([env:native-wasm] is board_level=extra, compiled by the build-wasm CI job).
Suppress the wasm dir in suppressions.txt, the same way generated/ and .pio/
are already excluded.
* wasm: coalesce FS.syncfs so two never run at once
IDBFS syncfs is async; the explicit wasm_fs_sync (5s timer + post-save +
beforeunload) could overlap a prior in-flight sync, warning "2 FS.syncfs
operations in flight at once". Serialize: if a sync is running, mark a pending
re-sync and let the in-flight one chain it on completion — at most one in flight,
trailing writes still flushed. (Companion drops IDBFS autoPersist so this is the
single persistence path.)
* wasm: silence false-positive SAST on the emscripten glue
- extra_scripts/wasm_link_flags.py: restore the trunk-ignore-all(ruff/F821,
flake8/F821) header every other SCons extra_script carries; Import/env are
SConscript-injected globals, so ruff/flake8 flag them as undefined.
- .semgrepignore: exclude src/platform/portduino/wasm/js/ (browser WebUSB glue,
not part of the firmware binary). The unsafe-formatstring rule false-positives
on its benign retry/diagnostic console logs.
* Update .github/workflows/build_portduino_wasm.yml
Co-authored-by: Austin <vidplace7@gmail.com>
---------
Co-authored-by: Austin <vidplace7@gmail.com>
* Test commit for XEdDSA support
* Update to Crypto lib in Meshtatic org
* Generate a new node identity on key generation (#7628)
* Generate a new node identity on key generation
* Fixes
* Fixes
* Fixes
* Messed up
* Fixes
* Update src/modules/AdminModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/mesh/NodeDB.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Figured it out!
* Cleanup
* Update src/mesh/NodeDB.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/mesh/NodeDB.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/AdminModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update crypto commit hash
* Some fixes for xeddsa pr (#9610)
* fix: add null check for getMeshNode() in NodeInfoModule
getMeshNode() can return nullptr for unknown nodes. Dereferencing
without a check crashes the firmware when receiving NodeInfo from
a node not yet in the database.
* fix: enforce XEdDSA signature verification and prevent stripping
Previously, failed signature verification still allowed the packet
through, making signatures purely cosmetic. Now:
- Failed verification drops the packet (DECODE_FAILURE)
- Successfully verified nodes get HAS_XEDDSA_SIGNED bitfield set
- Unsigned packets from previously-signing nodes are rejected
- Log levels reduced from WARN/ERROR to DEBUG/WARN as appropriate
* fix: include packet metadata in XEdDSA signature
The signature now covers [fromNode | packetId | portnum | payload]
instead of just the payload bytes. This prevents:
- Replay attacks (different packetId fails verification)
- Reattribution (different fromNode fails verification)
- Portnum redirection (different portnum fails verification)
Also adds a key initialization check to xeddsa_sign (returns false
if XEdDSA keys are all zeros) and checks the return value in the
encode path.
* fix: handle existing key pair in AdminModule security config
When a user provides both a valid private key and public key via
admin config, the crypto engine's DH private key and owner public
key were never loaded. DMs and XEdDSA signing would silently break.
Add an else branch to load both keys into the crypto engine.
* perf: cache Ed25519 public key conversion in xeddsa_verify
curve_to_ed_pub() performs field element parsing, inversion, and
multiplication on every call. Since packets from the same node
tend to arrive in bursts, a single-entry cache avoids repeating
this expensive conversion for consecutive packets from one sender.
* fix: skip identity cleanup when node number is unchanged
createNewIdentity() was called on every generateCryptoKeyPair(),
including normal boots where the same key is regenerated. This
caused unnecessary NodeDB writes and old-node cleanup logic to
run when the node number hadn't actually changed.
Also fixes only zeroing byte[0] of the old node's public key
instead of clearing the entire array.
* fix: replace hardcoded 120 with derived XEDDSA_SIGNATURE_SIZE constant
The payload size check for XEdDSA signing used a magic number (120).
Replace with a derivation from DATA_PAYLOAD_LEN and XEDDSA_SIGNATURE_SIZE
so the limit adjusts automatically if constants change. This also
increases the max signable payload from 120 to 169 bytes, which is
still safe since the actual encoded size is checked after pb_encode.
* fix: add const qualifiers to XEdDSA verify and curve_to_ed_pub inputs
pubKey, payload, and signature parameters in xeddsa_verify are
input-only and should not be modified. Same for curve_pubkey in
curve_to_ed_pub.
* chore: remove commented-out old Crypto dependency in portduino.ini
* Leave out the admin module change for now
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* trunk
* protobuf re-update
* Protobufs
* Merge resolution fix
* Put XEDDSA on the right bit
* NodeDB update to new nodeInfoLite accessors, etc
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Refine unsigned packet rejection logic in Router (#10534)
* use hardware random to fill the first 32 signature bytes with entropy prior to signing.
* Add XEdDSA packet-signing policy tests and update dependencies for macos
* Minor fixes
* integrate XEdDSA support and update dependencies across multiple modules
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Wessel <github@weebl.me>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* macOS: enable CH341 LoRa-hardware path — fix serial truncation, document setup
Verified on Apple Silicon with a CH341A USB-SPI bridge (VID 0x1A86,
PID 0x5512) wired to an SX1262 (Meshstick variant) that the existing
`pine64/libch341-spi-userspace` lib_dep works on macOS as-is — Apple's
bundled CH34x driver only matches the CH340 *UART* variant
(PID 0x7523), so the CH341A's interface 0 is left unclaimed and
libusb opens / configures / claims it directly via IOUSBHostInterface.
End-to-end test: meshtasticd boots, libusb claim succeeds, SX1262 init
returns 0, TCP API serves the meshtastic CLI's --info / --sendtext flow.
Two changes:
1. **`PortduinoGlue.cpp:497`**: pass `sizeof(serial)` (= 9) instead of
the literal `8` to `Ch341Hal::getSerialString()`. The function in
`USBHal.h:61-68` treats `len` as buffer size and reserves one slot
for the null terminator (`bytesCopied = (len - 1) < 8 ? (len - 1) : 8`),
so passing 8 produced a 7-char serial — which then broke the
`strlen(serial) == 8` check at line 502, skipping the auto-MAC
derivation from serial + product string. On Linux this was masked
by the BlueZ HCI MAC fallback in `getMacAddr()` at lines 139-157,
but on macOS that fallback is `__linux__`-guarded so the serial path
is mandatory and the truncation left `mac_address` empty, causing
the daemon to exit with `*** Blank MAC Address not allowed!`.
2. **`variants/native/portduino/platformio.ini`**: expand the
`[env:native-macos]` comment block with a "Real LoRa hardware on
macOS" section. Documents:
- Why no upstream library change is needed (Apple kext targets
CH340/UART, not CH341A/SPI; libusb's `#ifdef __linux__` skip is
correct for macOS in this case).
- How to point `meshtasticd` at an existing platform-agnostic
`bin/config.d/lora-*.yaml` for CH341 hardware.
- The auto-MAC-derivation contract (now working with this fix).
- `ioreg` and `LIBUSB_DEBUG=4` diagnostic recipes for the failure
mode where a third-party WCH `CH34xVCPDriver` *would* claim
interface 0 (`kmutil unload -b <bundleID>` workaround).
No upstream library forks, no PR chain, no additional lib_deps —
the existing `pine64/libch341-spi-userspace` + libusb-1.0 stack does
the right thing on macOS already.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Force coverage tests to run in simulation mode
* Revert "Force coverage tests to run in simulation mode"
This reverts commit e4ec719e6f.
* Force coverage tests to run in simulation mode
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
