mirror of
https://github.com/meshtastic/firmware.git
synced 2026-11-01 11:59:23 -05:00
renovate/python-3.x
6
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 renovate[bot]
|
1d0fe91aa9 | Update python | ||
|
Austin
|
1dff54cabf |
Actions: pin python to 3.14 where platformio is used (#12210)
Pin python 3.14 (not `3.x`) now that 3.15 exists. Fixes currently broken wasm / test jobs. |
||
|
|
1e3a38fc8a |
Add native Portduino mDNS discovery with Avahi and Bonjour (#12032)
* Add native Portduino mDNS discovery via Avahi and Bonjour * Guard native discovery in Portduino WASM builds * Add linux dependencies in packaging, support "buildroot" Adds libavahi dependencies for Debian, RPM, Docker and CI. Moves the libavahi definition to the shared `build_flags` (which is only consumed on Linux targets) * Fix platformio formatting * fix(portduino): disable Avahi when daemon unavailable --------- Co-authored-by: Jake-B <jake-b@users.noreply.github.com> Co-authored-by: vidplace7 <vidplace7@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
Jonathan BennettandClaude Opus 5
|
8c0abbd522 |
feat(portduino): BLE peripheral support via BlueZ for meshtasticd (Raspberry Pi) (#11396)
* feat(portduino): BLE peripheral support via BlueZ for meshtasticd on Linux Adds the standard Meshtastic BLE service (toRadio/fromRadio/fromNum/logRadio) to the Linux native target, so a Raspberry Pi running meshtasticd can be paired and used over BLE like any other Meshtastic device. Implementation: a new LinuxBluetooth backend registers a GATT application, LE advertisement and pairing agent with bluetoothd over the org.bluez D-Bus APIs, using sdbus-c++ (both the 1.x and 2.x major versions, via a small compat shim - Debian bookworm/Ubuntu 24.04 ship 1.x, trixie/Fedora ship 2.x). When the sdbus-c++ dev package is absent the whole backend compiles out via __has_include, the same optional-dependency idiom as the ulfius webserver. Threading follows the NimbleBluetooth model, simplified: the sdbus event loop runs its own thread, and all PhoneAPI calls happen on the main thread. Writes queue to the main loop; reads park the D-Bus reply and are completed from the main thread after queued writes, so write-then-read clients see their answer without any busy-waiting. Enablement is a double opt-in: a new `Bluetooth:` config.yaml section (Enabled, default false; AdapterId, default hci0) must turn BLE on for the host, and the regular device config bluetooth.enabled must be on. The config-check schema and fixtures cover the new section. Pairing honors config.bluetooth.mode: NO_PIN maps to a NoInputNoOutput just-works agent; RANDOM_PIN to DisplayOnly with the kernel-generated passkey shown on screen/log via the existing BluetoothStatus plumbing. FIXED_PIN falls back to random-passkey semantics with a warning - BlueZ does not support forcing a passkey. PIN modes enforce encrypt-authenticated-read/write on all mesh characteristics. Packaging: install a D-Bus system policy so the meshtasticd user may talk to org.bluez, add it to the bluetooth group, order the unit after bluetooth.service, and add libsdbus-c++-dev to debian/rpm/docker/CI deps. Verified in-container against a mock bluetoothd: registration flow, GATT tree enumeration, advertisement properties, and a full config download (ToRadio wantConfig -> 47 FromRadio packets) through the D-Bus bridge. Real-hardware pairing/notify testing on a Pi still pending. Known limitations (v1): meshtasticd must be restarted if bluetoothd restarts; FIXED_PIN degrades to a random passkey; getRssi() returns 0 (same as nRF52). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0184v7MyCLuJHW2ebZ9r8NmQ * fix(portduino): BLE fixes from first real-hardware pass (Pi CM5 + RAK6421) Findings from testing PR #11396 on a Raspberry Pi CM5 (Pi OS trixie, BlueZ/sdbus-c++ 2.1 - the v2 compat path) with a RAK6421 HAT and an Android phone: - getMacAddr() leaked its HCI socket on every call and never closed it, and on failure returned without touching the caller's buffer - which getDeviceName() passed in uninitialized. Close the socket on all paths and cache the MAC after the first successful read; it cannot change at runtime and this now runs on every bluetoothd property read. - getDeviceName() zero-initializes its MAC buffer, and LinuxBluetooth snapshots the name once at setup() on the main thread: the advertisement's LocalName getter runs on the D-Bus event-loop thread and getDeviceName()'s static buffer is not thread-safe. - Restore NimBLE-style config-phase packet prefetch (depth 3). The initial port answered every FromRadio read with a D-Bus -> main-loop round trip, which made the config download noticeably slow; ReadValue now answers straight from the prefetch queue on the event-loop thread, with NimBLE's safety rules (never in STATE_SEND_PACKETS, writes always observed before reads, queue cleared on disconnect). - Set advertising MinInterval/MaxInterval to 20-100ms (BlueZ >= 5.71; older versions ignore the properties). btmon showed the kernel default of 1.28s otherwise, and Android's background-connect scan windows are sparse enough that tap-to-connect took 8-14s; 20ms is the same floor NimBLE uses on ESP32. Verified on hardware: scan, passkey pairing, connect, config download, reconnect after bond wipe. Also diagnosed (no code change): the node identity MAC comes from the RAK HAT EEPROM by design, so the BLE name suffix follows the HAT rather than the BT adapter. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0184v7MyCLuJHW2ebZ9r8NmQ * fix(portduino): address CodeRabbit review on BLE support - setBluetoothEnable: handle disable before the config gate, so a running BLE stack is always stoppable even after the device config turns Bluetooth off underneath it - getMacAddr: read the adapter configured as Bluetooth.AdapterId instead of hardcoding hci0, falling back to hci0 for unparseable names - systemd unit: Wants=bluetooth.service so bluetoothd is pulled up when present (After= only orders, it does not start it) - debian/rpm: Recommends: bluez as the runtime contract for BLE - dbus policy: document why the org.bluez rule is destination-wide rather than a per-interface allowlist Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0184v7MyCLuJHW2ebZ9r8NmQ * fix(portduino): show the BLE pairing code on BaseUI screens onDisplayPasskey published the passkey to bluetoothStatus and triggered PowerFSM, but never called screen->startAlert(), so on BaseUI the code only ever reached the log. BluetoothStatus has no BaseUI consumer -- only InkHUD's PairingApplet and StatusLEDModule read it -- so a Pi driving a HUB75/OLED panel showed nothing while BlueZ sat waiting for the user to type a code they could not see. NimBLE and nRF52 draw it via startAlert(); this adds the missing half for Linux. The agent callbacks run on the sdbus event-loop thread while the screen is owned by the main thread, so the passkey is handed over as a pending flag and drawn from runOnce(), matching the existing disconnectCleanupPending pattern rather than reaching into the screen from the event loop. Dismissed on all four exits, so a stale code cannot stick on an always-on panel: Paired -> true (newly watched in PropertiesChanged, which previously only looked at Connected), agent Cancel, peer disconnect (moved out of the lastGone branch so a peer leaving mid-pairing clears the code even when another device is still connected), and doDeinit() -- applied inline there because runOnce() may never be scheduled again after teardown. Verified on a Pi 5 + BlueZ 5.66 in RANDOM_PIN mode: the code renders on a HUB75 panel and clears once the phone completes pairing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * ci: install libsdbus-c++-dev for the native test build setup-native-test landed on develop while this branch was adding libsdbus-c++-dev to setup-native, so the new action's "full setup-native list" of C libraries is missing it. Without the package the test job builds with HAS_BLUETOOTH 0 and never compiles LinuxBluetooth.cpp. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0184v7MyCLuJHW2ebZ9r8NmQ * fix(portduino): warn when a factory reset cannot clear BLE bonds factoryReset(eraseBleBonds) silently did nothing on Linux when the BLE backend was not running, so the reset reported success while the host's pairings stayed. Removing them needs a live connection to bluetoothd that a disabled backend never opened, so say so rather than imply they went. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0184v7MyCLuJHW2ebZ9r8NmQ * fix(portduino): gate the factory-reset bond clear on an enabled backend setup() leaves linuxBluetooth allocated with its bus torn down when it throws, so a pointer check alone let factoryReset log "Clear bluetooth bonds" for a clear that clearBonds() then declined to perform. isEnabled() is only true after setup() completes, which routes that case to the warning that says the bonds were left alone. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0184v7MyCLuJHW2ebZ9r8NmQ * style: reformat under clang-format 20 #11909 moved trunk from clang-format 16 to 20, which spaces C-style casts differently and reindents the comment above the HAS_WIFI block. Both files are ones this branch already touches, and trunk's fmt linter grades whole files, so its check fails until they are reformatted. No behaviour change. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0184v7MyCLuJHW2ebZ9r8NmQ * fix(portduino): three BLE config and lifecycle fixes from review Bluetooth config keys are now assigned individually rather than per section. loadConfig() runs once for every file in config.d, so reading an absent key as its default let a later file that named only one of them silently reset the other: `AdapterId: hci1` alone turned Bluetooth off, and `Enabled: true` alone dragged the adapter back to hci0. Only what a file actually states should override what an earlier one set. A backend that failed to come up is now retried. setup() can leave linuxBluetooth non-null but disabled - bluetoothd not ready, adapter missing, policy refusing - and every later enable then called resumeAdvertising(), which returns immediately while disabled. A transient failure at boot kept BLE off until the process restarted. doSetup() already opens with `if (enabled) return` and tears the bus down on every failure path, so calling it again is safe. Bluetooth.AdapterId is now checked for the hci<digits> form. LinuxBluetooth uses the value verbatim as the BlueZ object path while the MAC fallback reads only the leading hciN, so "hci1junk" looks plausible, yields a MAC, then finds no adapter and BLE never comes up. Covered by a new fixture and suite case, which is the kind of silent no-op that directory exists to catalogue. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
renovate[bot]
|
5920d05f5b |
chore(deps): update actions/setup-python action to v7 (#11727)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> |
||
|
Thomas Göttgens
|
9850b76351 |
ci(test): shard the native test suite across a matrix (#11706)
* ci(test): shard the native test suite across a matrix Replace the single sequential runner with a matrix populated by bin/test-shards.py from the test/ tree: areas over --max-suites are split, smaller ones packed, and a --max-shards budget bounds the fan-out. A collector job merges the per-shard JUnit reports, checks the union against the canonical suite set, and states the verdict. Native PlatformIO Tests remains as the single required check over the matrix. Drop the --without-testing warm build. PlatformIO links every native test program to the same $BUILD_DIR/$PROGNAME, so the area run relinked each suite regardless. ccache carries the shared src objects between shards instead; one shard is flagged cache_writer so a single entry is saved. The coverage-event-policy and coverage-channel-table envs and the attribution canary move into their own matrix rows and job. Harden the new paths: bound the matrix row count so a branch cannot size the fan-out, reject multi-line or empty $GITHUB_OUTPUT values, fail the whole-run attribution gate on an empty expected set, upload exact report and tracefile names instead of globs, and pass the repo path to bin/lib/shuffle.sh as an argument rather than into bash -c source text. 12 shards, largest 9 suites. * ci(test): minimal test toolchain, cap shard runtime, fix pack overflow Add .github/actions/setup-native-test, used by the shard and canary jobs in place of setup-native. It drops the redundant second checkout, both submodules (src/mesh/generated is tracked, meshtestic is the hardware harness), cppcheck, and the adafruit-nrfutil, poetry and meshtastic pip installs, and folds in ccache and lcov. setup-base and setup-native are unchanged, so the firmware matrix and every other consumer keep theirs. Cap the shard job at 30 minutes. A lost runner held one for 48 of the 360 GitHub allows by default, and there are twelve of them. pack() could exceed --max-suites: ceil(total / cap) is a lower bound and whole areas do not divide, so three areas of 6 at cap 10 put 12 in one of two bins. Grow the bin count until every bin fits. Validate the fixed-env test_filter tokens against SUITE_RE. PlatformIO accepts globs there, and those tokens reach the same word-split and the same attribution gate as discovered names. Split with read -ra so a token cannot glob against the workspace either. Report the suite count rather than the length of the -f argument array, which counted every name twice. Trim comments to the one or two lines AGENTS.md asks for. * ci(test): quote the $GITHUB_OUTPUT redirects Applied to all five, including the three that predate this branch, so the file is consistent rather than half-converted. |