mirror of
https://github.com/meshtastic/firmware.git
synced 2026-09-30 18:25:21 -04:00
08cfb3d683653d603880ceee954efeb9f6231d23
11
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
5ded0ec8c5 | Gate identity learning on signature in NodeDB::updateUser (#11084) | ||
|
|
023351a979 |
Remove dead code (#11082)
Removed: - MessageStore::addFromPacket and addFromString, superseded by tryAddFromPacket - GeoCoord rangeRadiansToMeters, distanceTo, bearingTo - Router::rawSend, declared virtual with no override and no caller - ContentHandler handleHotspot, handleFs, handleAdminSettings, handleAdminSettingsApply, handleDeleteFsContent and their commented route registrations, plus the now unreachable htmlDeleteDir and the handleUpdateFs declaration that had no definition - ContentHelper replaceAll - OnScreenKeyboardModule popup chain: showPopup, clearPopup, drawPopup, drawPopupOverlay and their state, unreachable since the frame based UI was replaced by baseUI - DebugRenderer drawDebugInfoTrampoline, drawDebugInfoSettingsTrampoline and the orphaned drawFrameSettings - NodeListRenderer calculateMaxScroll, drawColumns and a stale extern haveGlyphs declaration with no definition - UIRenderer::haveGlyphs, Screen::blink, NotificationRenderer::showKeyboardMessagePopupWithTitle, VirtualKeyboard::getInputText - InkHUD touchNavLeft, touchNavRight, Applet::getActiveNodeCount, ThreadedMessageApplet::saveMessagesToFlash - TwoButton::setHandlerUp, TwoButtonExtended setHandlerUp, setJoystickDownHandlers, setJoystickUpHandlers - CannedMessageModule LaunchRepeatDestination, isCharInputAllowed, hasMessages - TrafficManagementModule resetStats, recordRouterHopPreserved, saturatingIncrement - UnitConversions::MetersPerSecondToMilesPerHour - EncryptedStorage getSessionRemainingSeconds - BMI270Sensor::writeRegisters, GPS::hasFlow, FSCommon copyFile, SerialConsole consolePrintf, buzz playLongPressLeadUp, memGet displayPercentHeapFree |
||
|
|
985b983f67 |
TrafficManagement: gate role/NodeInfo cache writes on signer authenticity (#11048)
* TrafficManagement: gate role/NodeInfo cache writes on signer authenticity The tier-3 role cache and the PSRAM NodeInfo response cache were updated from any received NodeInfo with no authenticity check, so a spoofed NodeInfo could set a node's cached role (granting dedup exceptions) or poison the cached user served in direct responses. Skip both cache writes when a known signer's NodeInfo arrives unsigned, matching the identity-update gate on the direct-response path. * TrafficManagement: hoist shared NodeInfo signer lookup Compute the sender node lookup and unauthenticated-signer check once per NodeInfo packet and reuse it for both the cache-refresh gate and the direct-response identity gate, avoiding a second O(N) getMeshNode scan. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
|
ed3afdbc61 | TrafficManagement: don't learn identity from a signer's unsigned NodeInfo (#11035) | ||
|
|
6c7ee8afc7 |
Add MemAudit: per-subsystem heap accounting in the boot log (#10900)
* Add MemAudit: per-subsystem heap accounting in the boot log The 2.8.0 nRF52840 heap-exhaustion field reports had to be diagnosed by hand, reconstructing each subsystem's heap footprint from source and build flags one report at a time. This makes every future report self-diagnosing from the serial log: a tiny fixed-size registry (src/memory/MemAudit.*) that big long-lived allocations report into, printed as one line at the end of setup() and alongside the periodic "Heap free:" log: MemAudit[boot]: tmm=2500 warm=4000 pkthist=5824 nodedb=13440 msgstore=2200 pktpool(live)=3270 total=31234 Instrumented: NodeDB hot vector (nodedb) + satellite maps (satmaps, rb-tree overhead estimated), WarmNodeStore (warm), PacketHistory records and hash index (pkthist), TrafficManagement caches (tmm/tmm_ni), MessageStore text pool (msgstore), TFT line/repaint buffers (display), and live in-flight packets (pktpool(live)) via an optional audit tag on the packet pool allocator - the one hot path, counted with a relaxed 32-bit atomic add (single instructions on Cortex-M, no locks). Cost: 128 B RAM for the 16-tag table, well under 1 KB flash on rak4631. MESHTASTIC_MEM_AUDIT=0 compiles it out to inline no-op stubs (call sites need no ifdefs); STM32WL, the tightest flash target, defaults off. New native suite test_mem_audit covers add/set/snapshot arithmetic, tag reuse (pointer and cross-TU strcmp fallback), null/unknown tags, and table-full behavior; test/native-suite-count bumped to 28. * native-wasm: add src/memory/ to the curated source filter The wasm env denies all sources and adds an explicit file list; MemAudit callers (main, MeshService, NodeDB, PacketHistory) are in that list but src/memory/MemAudit.cpp was not, so wasm-ld failed on undefined memaudit:: symbols. |
||
|
|
3becaf2d95 | emdashes begone (#10847) | ||
|
|
c51c01607d |
Traffic Management module: dedup, rate limiting, role-aware policing (#10706)
Adds the Traffic Management module (TMM) plus the NodeDB/warm-store and next-hop foundations it builds on: - Unified per-node cache (flat array, 8-bit relative ticks) shared by all features; role-aware throttles for tracker / lost-and-found. - Position deduplication: drop unchanged position rebroadcasts within a configurable interval; precision driven off the channel ceiling (clamped to the public-key max on well-known channels). Enabled by default at 11h. - Per-node rate limiting and unknown-packet filtering (config-driven; a non-zero companion field enables each feature -- no bool toggles). - NodeInfo direct response from cache with role-based hop clamps. - Persistent next-hop overflow store: confirmed hops have no TTL, are seeded from NodeInfoLite at boot, and survive hot-store eviction. - Three-tier sender-role resolution (hot NodeInfoLite -> warm store -> TMM cache). Role is cached write-time (seeded on first track, refreshed from NodeInfo), pins its cache entry like a next-hop hint, and is evicted last. - Warm store caches device role + protected category across reboot/eviction. - PositionModule stationary floor for tracker / lost-and-found. - PSRAM gating for warm/satellite/TMM cache sizes; STM32WL excluded. Protobufs: TrafficManagementConfig trimmed to the five uint32 fields actually used; submodule repointed to protobufs develop. Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
22072c5f4b |
Pr1.5 tmm nexthop (#10745)
* TrafficManagement: flat unified cache + persistent next-hop overflow store Reworks the TrafficManagementModule cache layer (policing behaviour unchanged from upstream) and adds a routing-hint overflow store: - Flatten the ring: replace the cuckoo-hashed unified cache and the bucketed PSRAM NodeInfo index with plain flat arrays + linear scan (same idiom as WarmNodeStore). At LoRa packet rates an O(n) scan of the cache is negligible, and it removes a large amount of hashing/displacement complexity. The cache entry is 11 B; timestamps use a uniform +1 presence-offset so a 0 byte always means "empty" across every sub-store. Adds rebaseEpoch() so cached state survives the ~19 h relative-timestamp horizon instead of being flushed. - Next-hop overflow cache: setNextHop/getNextHopHint store a confirmed last-byte relay for a destination, written only from NextHopRouter's ACK-confirmed decision (and mirrored from TraceRoute). NextHopRouter::getNextHop falls back to this cache when the hot NodeDB has no hint, so DMs/relays to long-tail nodes keep routing after the node ages out of NodeInfoLite. - Persistence: preloadNextHopsFromNodeDB warm-starts the cache from persisted NodeInfoLite hints on first maintenance pass; next_hop entries are kept alive across the maintenance sweep (no TTL) and never clobbered by a stale preload. All packet-policing logic (rate limit, position dedup, unknown-packet drop, NodeInfo direct response, hop exhaustion) is the existing upstream behaviour, untouched. HAS_TRAFFIC_MANAGEMENT defaults on so the module is compiled in. (see note). Tests: upstream policing suite now actually runs (adds the MeshTypes.h include that gates HAS_TRAFFIC_MANAGEMENT) plus 4 next-hop tests. Role-aware throttles, politeness, precision clamp, port-interval and mesh-radius gating — and the rate-limit >255 saturation fix — are deferred to the advanced-TMM branch. Note: default dedup movement grid moves to ~91m, which also means 1.5km required to end up with the same signature position - coarser and therefore further than before. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * TrafficManagement: fix cppcheck constVariablePointer warning `node` in preloadNextHopsFromNodeDB() is never written through — mark it const to satisfy cppcheck's constVariablePointer check in CI. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Add multi-hop NextHop recovery tests and unit tests for routing reliability - Introduced a new test suite for multi-hop NextHop directed-message delivery and relay recovery in `test_nexthop_multihop_recovery.py`. This includes tests for end-to-end delivery and recovery after relay drop. - Implemented unit tests in `test_main.cpp` for NextHop routing reliability mitigations, covering: - M1: Ambiguity-aware last-byte resolution. - M2: NextHopRouter's strict-neighbor gate and hop limit checks. - M3: Route-health freshness and failure decay. - Enhanced mock classes to facilitate controlled testing of node behaviors and routing logic. * grafting fixed * Address Copilot review for PR #10735 (NextHop improvements) - docs/nexthop-routing-reliability.md: update status from "no code changes yet" to reflect that mitigations and tests are implemented RAM pressure and MIGRATION_VERBOSE concerns addressed upstream in PR2.5 (per-platform TRAFFIC_MANAGEMENT_CACHE_SIZE) and PR2 (verbose default=0) respectively; (0,0) sentinel fixed in PR2.5. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * CI: fix cppcheck constVariablePointer and test include path - NextHopRouter.cpp: qualify two RouteHealth *h locals as const — only read for stale-route checks, never mutated through the pointer - Router.cpp: qualify meshtastic_NodeInfoLite *node as const in shouldDecrementHopLimit — only read for favorite/role predicate - test_position_module/test_main.cpp: change bare PositionModule.h to modules/PositionModule.h — build_flags sets -Isrc, not -Isrc/modules, so the bare form fails to resolve in the native PlatformIO test env Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * WarmStore: cache device role + protected category in last_heard low bits Steal the low 6 bits of WarmNodeEntry.last_heard to carry an evicted node's device role (4 bits) and a protected category (2 bits) for the hop-trim path, at zero record-size cost (entry stays 40 B; no RAM/flash growth). The high bits remain a real unix-seconds timestamp, quantised to 64 s — ample for warm LRU ordering of long-tail nodes. - absorb() packs role/protectedCat; place()/ring replay store the raw word so metadata round-trips through flash. LRU compares masked time (warmTimeOf). - take() rehydration masks the metadata bits and restores the cached role so a re-admitted node isn't stuck at CLIENT until its next NodeInfo. - NodeDB classifies the category (favorite/ignored/verified -> Flag; tracker/sensor/tak_tracker -> Role) at each eviction site. - WarmNodeStore::lookupMeta() exposes role/category to consumers. - Bump WARM_RING_MAGIC (WRNG->WRN2): old rings read as erased and rebuild; warm data is a non-critical evictee cache, so discard-on-upgrade is safe. Tests: test_warm_store 11/11 (new meta round-trip + quantisation-aware ordering); NodeDB compiles (test_nodedb_blocked 4/4). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * WarmStore: migrate v1 rings/files by discarding last_heard, not the data Previously the WRNG->WRN2 magic bump treated old rings as erased, discarding all warm entries — including the PKI public keys that let evicted nodes keep decrypting DMs. Instead, read v1 (WRNG / WRM1) records and keep each node's identity + public key, discarding only last_heard (its low bits would otherwise be misread as the new role/protected metadata). Records re-rank and re-learn their role on next contact. - Ring backend (nRF52840): ringReadHeader accepts both magics and reports v1 via an out-param; replay zeroes last_heard for v1 records. If the active head page is v1, force a rotation so new v2 records never land in a v1-headered page (which would discard their freshly-set role on the next load). Legacy pages convert to v2 as the ring rotates. - File backend (warm.dat): bump WARM_STORE_MAGIC WRM1->WRM2; accept WRM1, verify CRC against the stored bytes, then discard last_heard and mark dirty so the next save rewrites as v2. Tests: test_warm_store 12/12 (adds test_ws_v1_migration_discardsLastHeard: key survives, role/protected reset). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * WarmStore: guard role bit-width + test eviction carries role/protected - static_assert that the device role enum still fits the 4-bit warm metadata field (WARM_ROLE_MASK); fails the build loudly if a new role is added past 15 rather than silently truncating role on eviction. (Max role today = 12.) - Add test_migration_carriesRoleAndProtectedIntoWarm: a demoted TRACKER lands in the warm tier with its key, role=TRACKER and protected category=Role; a demoted CLIENT carries role=CLIENT/None. Exercises the NodeDB eviction path + warmProtectedCategory classification (the warm-store unit tests only cover absorb() directly). Tests: test_nodedb_blocked 5/5. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix copilot comments * fix(test): restore #if HAS_TRAFFIC_MANAGEMENT guard in TMM test The rebase onto PR1.5 lost the top-level HAS_TRAFFIC_MANAGEMENT guard that PR1.5 introduced, leaving the #else/#endif tail orphaned and causing compile errors on non-TMM builds. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
|
94bb21ecc7 |
2.8: NodeDB shrink, decoupling, and restructuring (#10413)
* 2.8: NodeDB refactor to decouple satellite entries and decrease size * Regen * Refactor node mute handling to use dedicated functions for clarity and consistency * Develop ref * Fix NodeDB review follow-ups Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/6b1d6cf6-ed6b-43b6-95cb-8e141757664e Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Address review validation nits Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/6b1d6cf6-ed6b-43b6-95cb-8e141757664e Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Trunk * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Extract legacy NodeDatabase migration * Fix remaining NodeDB review issues Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/c76b9a5a-7244-4fbc-9ef0-98091d8caaea Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fixes * Trunk * Fix latest review compile follow-ups Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/5198da01-ec4c-4c16-8a09-68b8e6d5d410 Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fix cppcheck style warnings Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/e60287ba-4ece-46e0-83d8-a6d89664c0bb Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Change pointer type for mesh node in set_favorite function * Change pointer types for mesh node references to const in multiple applets * Add NodeDB layout v25 documentation and migration guidelines * Remove tests for uninitialized PacketHistory state due to undefined behavior * Fix code block formatting in copilot instructions --------- Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> |
||
|
|
b2c8cbb78d | Enhance traffic management by adjusting position update interval and refining hop exhaustion logic based on channel congestion (#9921) | ||
|
|
016e68ec53 |
Traffic Management Module for packet forwarding logic (#9358)
* Add ESP32 Power Management lessons learned document Documents our experimentation with ESP-IDF DFS and why it doesn't work well for Meshtastic (RTOS locks, BLE locks, USB issues). Proposes simpler alternative: manual setCpuFrequencyMhz() control with explicit triggers for when to go fast vs slow. * Addition of traffic management module * Fixing compile issues, but may still need to update protobufs. * Fixing log2Floor in cuckoo hash function * Adding support for traffic management in PhoneAPI. * Making router_preserve_hops work without checking if the previous hop was a router. Also works for CLIENT_BASE. * Adding station-g2 and portduino varients to be able to use this module. * Spoofing from address for nodeinfo cache * Changing name and behavior for zero_hop_telemetry / zero_hop_position * Name change for exhausting telemetry packets and setting hop_limit to 1 so it will be 0 when sent. * Updated hop logic, including exhaustRequested flag to bypass some checks later in the code. * Reducing memory on nrf52 nodes further to 12 bytes per entry, 12KB total using 8 bit hashes with 0.4% collision. Probably ok. Adding portduino to the platforms that don't need to worry about memory as much. * Fixing hopsAway for nodeinfo responses. * traffic_management.nodeinfo_direct_response_min_hops -> traffic_management.nodeinfo_direct_response_max_hops * Removing dry run mode * Updates to UnifiedCacheEntry to use a common cache, created defaults for some values, reduced a couple bytes per entry by using a resolution-scale time selection based on configuration value. * Enhance traffic management logging and configuration. Updated log messages in NextHopRouter and Router to include more context. Adjusted traffic management configuration checks in AdminModule and improved cache handling in TrafficManagementModule. Ensured consistent enabling of traffic management across various variants. * Implement destructor for TrafficManagementModule and improve cache allocation handling. The destructor ensures proper deallocation of cache memory based on its allocation source (PSRAM or heap). Additionally, updated cache allocation logic to log warnings only when PSRAM allocation fails. * Update TrafficManagementModule with enhanced comments for clarity and improve cache handling logic. Update protobuf submodule to latest commit. * Creating consistent log messages * Remove docs/ESP32_Power_Management.md from traffic_module * Add unit tests for Traffic Management Module functionality * Fixing compile issues, but may still need to update protobufs. * Adding support for traffic management in PhoneAPI. * Making router_preserve_hops work without checking if the previous hop was a router. Also works for CLIENT_BASE. * Enhance traffic management logging and configuration. Updated log messages in NextHopRouter and Router to include more context. Adjusted traffic management configuration checks in AdminModule and improved cache handling in TrafficManagementModule. Ensured consistent enabling of traffic management across various variants. * Implement destructor for TrafficManagementModule and improve cache allocation handling. The destructor ensures proper deallocation of cache memory based on its allocation source (PSRAM or heap). Additionally, updated cache allocation logic to log warnings only when PSRAM allocation fails. * Update TrafficManagementModule with enhanced comments for clarity and improve cache handling logic. Update protobuf submodule to latest commit. * Add mock classes and unit tests for Traffic Management Module functionality. * Refactor setup and loop functions in test_main.cpp to include extern "C" linkage * Update comment to include reduced memory requirements Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Re-arranging comments for programmers with the attention span of less than 5 lines of code. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update comments in TrafficManagementModule to reflect changes in timestamp epoch handling and memory optimization details. * bug: Use node-wide config_ok_to_mqtt setting for cached NodeInfo replies. * Better way to handle clearing the ok_to_mqtt bit * Add bucketing to cuckoo hashing, allowing for 95% occupied rate before major eviction problems. * Extend nodeinfo cache for psram devices. * Refactor traffic management to make hop exhaustion packet-scoped. Nice catch. * Implement better position precision sanitization in TrafficManagementModule. * Added logic in TrafficManagementModule to invalidate stale traffic state. Also, added some tests to avoid future me from creating a regression here. * Fixing tests for native * Enhance TrafficManagementModule to improve NodeInfo response handling and position deduplication logic. Added tests to ensure local packets bypass transit filters and that NodeInfo requests correctly update the requester information in the cache. Updated deduplication checks to prevent dropping valid position packets under certain conditions. --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |