mirror of
https://github.com/meshtastic/firmware.git
synced 2026-11-06 06:14:45 -05:00
34e518922ae90714c5cbe009afa85bbdcaf7fd10
17
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
80cfa52665 |
Add zero guards on time calculations where they were missing (#11692)
* time: add skipZero/safeMillis/timerEndsAtMillis helpers
skipZero() steps a millis value past 0, since stored stamps and deadlines
conventionally use 0 for "unset" and the one tick per ~49.7-day wrap that
lands on 0 would otherwise read as never-set.
safeMillis() covers a bare stamp; timerEndsAtMillis(delayMs) covers a
deadline, where the sum is what has to dodge 0 - a non-zero read plus a
delay lands there once per wrap - so it is not safeMillis() + delayMs.
* time: replace hand-rolled zero-dodging with the UptimeClock helpers
PacketHistory rxTimeMsec, EncryptedStorage s_lastFailMillis (stamps), and
SGM41562 lastRefreshMs_ / NextHopRouter learnedAtMsec (ternary stamps) each
hand-rolled skipZero() in place; swap in safeMillis()/skipZero() directly.
HapticFeedback pulseOffAt/delayedPulseAt and GPS fixHoldEnds hand-rolled the
deadline form - millis() + delay, then remap a 0 result to 1 - swap in
timerEndsAtMillis(delay).
No behavior change; each site keeps the value it already computed.
* time: guard the remaining 0-means-unset deadline/stamp writes
rebootAtMsec, shutdownAtMsec, and NotificationRenderer::alertBannerUntil are
all read back with a bare == 0 / != 0 check for 'not scheduled', but every
write site computed millis() + delay (or a bare millis() stamp) with no
guard against landing exactly on 0 - the same wrap hazard skipZero() exists
for, just never applied here.
Route every rebootAtMsec/shutdownAtMsec/alertBannerUntil write through
timerEndsAtMillis()/safeMillis(); RadioLibInterface's reboot-on-stuck-tx
sums an already-captured stamp rather than "now", so it goes through
skipZero() directly instead.
No behavior change outside the ~1-in-2^32 wrap window each site was
already exposed to.
* time: guard three more 0-means-unset deadline writes
ntp_renew (ethClient.cpp), suppressTouchTapUntilMs (Events.cpp), and tx_after
(RadioLibInterface.cpp) all read back 0 as a real state - forced NTP renewal,
no suppress window active, no TX delay armed, respectively - but each arm
site wrote a bare millis()/getMillis() + delay with no guard against the sum
landing exactly on 0.
Route each through Time::timerEndsAtMillis(). No behavior change outside the
wrap window each site was already exposed to.
Refresh the Throttle.h TODO list to note ntp_renew is converted too.
* motion: guard the calibration deadline and use Throttle::deadlinePassed
endCalibrationAt's arm site wrote millis() + calibrateFor with no guard
against landing on 0, the same value finishCalibrationIfExpired()/
drawFrameCalibration() treat as "not calibrating". Route it through
Time::timerEndsAtMillis().
Also swap finishCalibrationIfExpired()'s hand-rolled (int32_t)(now - deadline)
< 0 for Throttle::deadlinePassed(): same wrap-safe comparison the codebase
already provides, without the signed-cast pattern Throttle.h documents as
implementation-defined past INT32_MAX, and it drops the file's last direct
millis() call in favor of the Time:: wrapper the rest of it already uses.
* time: fix Throttle::execute()'s own zero-dodging
Both places execute() writes *lastExecutionMs - the first-ever-run branch
and the regular update - used bare Time::getMillis() with no guard against
landing on 0, which is the exact sentinel this function reads back as
"never run" one line above. A hit there makes the next call re-fire
immediately instead of respecting minumumIntervalMs.
Capture now via Time::safeMillis() once; every use downstream (the elapsed
comparison, the stored value) is then safe by construction instead of
needing the guard reapplied at each write.
* revert some safeMillis cases where overflow is a bad thing
* test(uptime): pin skipZero/safeMillis/timerEndsAtMillis at the wrap boundary
Covers the zero case, an ordinary nonzero value, and a sum that lands
exactly on 0 from a nonzero start - the case timerEndsAtMillis() exists
for, and the one the prior suite had no direct coverage of.
* time: restore the route-health write normalization and put it on one clock
noteRouteLearned()/noteRouteSuccess() lost their `now ? now : 1` normalization,
leaving learnedAtMsec able to store 0 - which getOrAllocRouteHealth() reads as an
ever-growing age, making the slot the first eviction candidate and permanently
stale. Normalize at the write, where the block comment already says it happens,
so every caller is covered rather than just today's two.
Both callers, the two isRouteStale() sites and doRetransmissions() now read
Time::getMillis(), so the stamp and every comparison against it share a clock.
doRetransmissions() goes back to getMillis(): its `now` feeds only comparisons,
never a 0-sentinel field, so skipping zero there only cost accuracy.
* time: read the haptic, InkHUD and calibration deadlines on the write's clock
These three deadlines were converted to Time::timerEndsAtMillis() on the write
side while their reads stayed on millis(), so each spanned two clocks and would
fire immediately or never under an injected test clock. Convert the reads to
match: HapticFeedback::scheduleNext()/runOnce(), the InkHUD tap-suppression
window, and the calibration countdown's read-back of screen->getEndCalibration().
MotionSensor's sampledAtMs is left alone - its write and read are both millis()
and consistent already.
* time: correct the sentinel notes to match what the code actually does
The Throttle.h enumeration claimed the remaining timerEndsAtMillis() callers
"already dodge the sentinel", which reads as a completeness claim the same branch
contradicts: RadioLibInterface's tx_after and activeReceiveStart are both 0=unarmed
and both still arm from bare millis(). Name them instead, so the deadline-type
conversion has the real list. The ntp_renew entry now separates a deliberate 0
("due now", forced at link-up) from a computed one, which is what changed there.
The three TODO(elapsed-stamp) blocks ran four and five lines against the repo's
one-or-two rule, and two of them argued their case wrongly. Throttle.cpp implied
safeMillis() simply doesn't help; in fact neither store is safe on the wrap tick -
the 1 underflows a same-instant read, the 0 re-takes the never-run branch - which
is the symmetry worth recording. PacketHistory.cpp called its dodge "reflecting
the previous pattern" when it is load-bearing: rxTimeMsec 0 means "empty slot"
(PacketHistory.h:21) and insert() drops a record stamped 0 outright, so without it
a packet arriving on the wrap tick is never stored and loses its dedup.
Also picks up trunk fmt's trailing-whitespace fix in Throttle.cpp and the comment
realignment in SGM41562.cpp that this branch's added comment knocked out.
* test(nexthop): pin the route-health stamp against the 0 sentinel
The uptime suite covers skipZero/safeMillis/timerEndsAtMillis themselves, but
nothing covered a call site, so the branch deleted noteRouteLearned()'s
normalization and stayed green. None of the existing route-health tests pass 0 as
`now` - they use 1000, learnAt, or millis() - (TTL + 5000) - which is exactly the
gap the regression went through.
Both new tests fail with "Expected 0 to be not equal to 0" when the skipZero() is
backed out of NextHopRouter, and pass with it. noteRouteSuccess() only refreshes
an existing record, so its twin learns a route first to reach the write.
Also drops a self-referential assertion in the uptime suite: comparing
getMillis() against safeMillis() passes even if safeMillis() does no dodge at
all, so it now asserts the literal.
* discard safemillis for skipzero (better semantics and therefore maintainability) and make consistent use of getmillis where it is called (to permit testing)
* more wrapzero safety
* STM gets some too
* time: stop the next 0-means-unset deadline being armed from raw millis()
The fields this branch armed through Time::timerEndsAtMillis() / Time::skipZero()
are the kind that get added by copy-paste: `rebootAtMsec = millis() + N` appears
at twenty-odd sites across six files, and the next module to defer a reboot will
be written from one of them. Nothing catches the mistake afterwards - the sum
lands on 0 for one tick per ~49.7-day wrap, so a test run, a soak and a bench
session all pass while a pending reboot, shutdown, DFU jump or banner expiry is
silently dropped.
Two guards, at the two places it can go wrong.
The helpers themselves: skipZero() is constexpr, so its contract is now pinned by
static_assert in the header rather than only by test_uptime_clock. The asserts are
chosen against the two plausible rewrites - `ms | 1` perturbs every even value and
`ms + 1` turns the last tick of the wrap into the 0 the function exists to avoid.
Both compile, and both pass a test that only checks skipZero(0); each trips a
distinct assert here, naming the failure mode.
The call sites: bin/lint-unset-sentinel-millis.sh flags a sentinel field in src/
assigned from a raw millis()/getMillis() read, and names the helper to use. It is
name-driven because the 0 contract is declared in src/main.h and enforced in six
other files, so no single-file scan can infer it; every one of the thirteen fields
was checked to actually test against 0 before being listed. nagCycleCutoff and
LinuxJoystick's nextRepeatX/nextRepeatY are deliberately absent - their unset state
is a separate bool - and the nine remaining `millis() + x` sites in src/ are locals
that never store 0 for anything to misread.
Blocking, unlike its note-level neighbours: there is no run-time enforcer to pair
with, and the tree has zero violations today, so gating costs nothing. Scoped to
src/ so test_uptime_clock can keep building raw wrap values on purpose.
bin/test-lint-unset-sentinel-millis.sh pins the scanner against 23 fixtures -
reads, disarms, shadowing locals, comments, string literals and the already-fixed
forms all have to stay quiet.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* time: guard the four 0-means-unset stamps this branch had missed
Sweeping src/ for the `if (stamp && <deadline check>)` idiom - the shape that
makes 0 mean "unset" - turned up four stamps still armed from a raw clock read,
so the new lint rule would have had to either ignore them or go red on checkout.
Each is the same one-tick-per-wrap hole the rest of the branch closes:
* TrackballInterruptBase lastInterruptTime, armed in all four ISR handlers and
explicitly disarmed to 0 at the threshold reset. getMillis() is the ISR-safe
read by construction - it compiles to millis() outside PIO_UNIT_TESTING - and
skipZero() is pure, so neither adds anything to interrupt context.
* NeighborInfoModule lastSentReply, read as `if (lastSentReply && ...)` before
the 3-minute reply throttle. Needed the UptimeClock.h include.
* PositionModule lastSentReply, same throttle; already on the injectable clock
but still missing the guard.
* NodeDB lastSort, whose own read spells the sentinel out as `lastSort == 0 ||`.
On the wrap tick each would read as never-stamped: a trackball debounce window
lost, a neighbour or position reply sent inside the throttle it was meant to
respect, one extra NodeDB sort. Cheap individually, which is why they were missed.
All four are now listed in bin/lint-unset-sentinel-millis.sh, so the rule covers
every field in the tree that actually tests against 0 rather than a subset, and
the header records the eight stamps left off for the opposite reason - their unset
state is a separate flag (isNagging, busyTx, heldX/heldY, formatted_this_boot,
heartbeat, gotwind, haveSample, lastIaqValid), so 0 is a value they may legally
hold. The rule is silent across src/ on this tree.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* lint: let a site opt out of the sentinel rule, with its reason on the record
The rule is blocking, so it needs an escape hatch for the site where 0 genuinely
is a legal timestamp - and the hatch should cost something, or it becomes the
first thing anyone reaches for. `unset-sentinel-ok: <reason>` in a comment on the
write, or on a comment line above it, suppresses that one statement:
// unset-sentinel-ok: busyTx carries the armed state, so 0 is a legal stamp here
lastTxStart = Time::getMillis();
The reason is mandatory. A bare `unset-sentinel-ok`, or a colon with nothing
after it, is reported instead of honoured - with a message saying so - so the
only way to silence a site is to write down why it is safe. trunk-ignore still
works, but this states the justification at the write and also applies when the
script runs outside trunk.
The marker is read from comment text collected during the same character-level
pass that strips comments and literals, not by re-scanning the raw line. That is
what keeps it out of reach of data: LOG_DEBUG("unset-sentinel-ok: ...") mutes
nothing, because a string literal is not a comment. It is also consumed by the
statement it was written for, so it cannot leak onto the next write - while still
carrying across any number of intervening comment lines to the statement below,
which is where a real justification wants to be written.
Twelve fixtures added for the new behaviour: both comment styles, block and
multi-line block comments, the bare form, the marker-in-a-string cases, and three
leak cases. 35 total, all green, under bash 3.2 as well.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* lint: watch the separate-flag stamps too, with their exemption stated at the write
The nine stamps whose armed state lives in a companion boolean were previously
just absent from the rule's list, which meant the reasoning for leaving them out
existed only as prose in a shell script. They are now listed and individually
opted out at the write, naming the flag that actually carries the armed state:
// unset-sentinel-ok: haveSample carries the armed state, so 0 is a legal stamp
lastSampleMs = Time::getMillis();
The point is what happens later. If someone rewrites `if (haveSample && ...)` as
`if (lastSampleMs && ...)`, the field has silently acquired the 0 contract; with
the opt-out sitting at the write, the claim to re-examine is in front of whoever
makes that edit instead of buried in bin/.
Every exemption was checked against its real read sites before being written, and
three candidates did not survive that check. They stay off the list, because
listing one would mean stamping an opt-out over a claim that does not hold:
* nagCycleCutoff. handleInputEvent reads `if (nagCycleCutoff != UINT32_MAX)`
without consulting isNagging, so at that read the field is its own armed flag
with UINT32_MAX as the sentinel - and the arm at ExternalNotificationModule
.cpp:521 can land exactly there. skipZero() cannot help: it lifts 0 to 1 and
leaves UINT32_MAX alone, which UptimeClock.h's own static_assert pins. There
is also a live boot-state bug behind this - the in-class initializer is 1
while isNagging starts false - and fixing the read is a behaviour change that
belongs in its own PR.
* TouchScreenBase::_start. Overloaded as an event stamp AND a `+ 30000`
suppression deadline compared by signed subtraction, so a near-zero value
reads as "long ago" rather than "armed 30s out" and LONG_PRESS re-fires.
skipZero() does not fix this one either: 1 reads as long-ago exactly as 0
does. It needs the stamp and the deadline held separately.
* StoreForwardModule::retry_delay. No reads at all today, so nothing misbehaves
yet; exempting it now would pre-approve the raw arm for whoever implements the
retry its own comment promises.
The rule is silent across src/ on this tree, and the header records all three
rejections so the next person does not have to re-derive them. The self-test's
negative fixture no longer uses nagCycleCutoff as its example of a safely
unlisted field - that would have encoded the opposite of what the header says.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fix(time,lint): guard the recomputed tx_after, and judge one write at a time
Two review findings, both real.
setTransmitDelay() recomputes p->tx_after from a clamp of three candidates, and
that recomputation was still raw. Two lines above it, `if (p->tx_after)` is the read
that takes 0 as "no delay wanted", so a clamp landing on 0 drops the CSMA backoff
and the packet goes out immediately instead of after its computed delay. The first
arm site in this function was already guarded; this one was missed because the
value is not a plain `now + delay` and so does not fit timerEndsAtMillis() - it
takes skipZero() instead.
The narrowing order matters here and is spelled out at the site: add_delay is
unsigned long, 64-bit on the portduino host, so the clamp can exceed UINT32_MAX
there. skipZero() on the wide value would pass 0x100000000 through as non-zero and
the store to this uint32_t field would then truncate it back to the 0 being
avoided, so the cast comes first.
The lint rule judged each write by the wrong text. rhs was taken from the write to
the end of the accumulated statement, so a neighbour on the same line decided the
verdict - and it was wrong in both directions:
rebootAtMsec = millis() + 5; shutdownAtMsec = Time::timerEndsAtMillis(10);
the later helper call suppressed a genuine raw arm
rebootAtMsec = otherDeadline; shutdownAtMsec = millis();
the later millis() reported a safe copy
rhs is now cut at its own semicolon. Six fixtures cover it, including both cases
above, two raw writes on one line, two helper writes on one line, and a statement
split across lines, which must still see its whole right-hand side. 41 fixtures
total, green under bash 3.2.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
|
||
|
Thomas Göttgens
|
9c027a24ea |
Toggle GPS and buzzer together on the ThinkNode M8 function button double click (#11551)
* Toggle GPS and buzzer together on the ThinkNode M8 function button double click * Shorten the comments added with the ThinkNode M8 double click toggle * Only sync the buzzer when the GPS mode actually toggles, and unmute before the tone plays |
||
|
Benjamin Faershtein
|
6085a4f003 | fix(nrf52): keep BLE active during reset cleanup (#10873) | ||
|
|
8e99ffbe7e |
ThinkNode M7 (#8077)
* ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * rename variant and add guard macros * older G3 operational. M7 next. * Split out G3 and M7 to different variants. Completely new PCB design. The G3 stays on 'PRIVATE_HW' * Define button behaviour and use all of the device flash --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> |
||
|
Jason P
|
70f909d718 | Fix Function + M in code (#9200) | ||
|
Jorropo
|
beb268ff25 |
Revert "add a .clang-format file (#9154)" (#9172)
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit
|
||
|
Jorropo
|
0d11331d18 | add a .clang-format file (#9154) | ||
|
Jason P
|
25acce2a8d |
Add Temporary Mute to Home frame and unbury Notification Options (#9097)
* Add Temporary Mute to Home frame and unbury Notifications * Only show Temporary Mute if it applies * Remove banner notification, we display the icon immediately * Remove extranous isMuted, there are better ways! |
||
|
|
9da4396c6f |
Multi message storage (#8182)
* First try at multimessage storage and display * Nrf built issue fix * Message view mode * Add channel name instead of channel slot * trunk fix * Fix for DM threading * fix for message time * rename of view mode to Conversations * Reply in thread feature * rename Select View Mode to Select Conversation * dismiss all live fix * Messages from phone show on screen * Decoupled message packets from screen.cpp and cleaned up * Cannedmessage cleanup and emotes fixed * Ack on messages sent * Ack message cleanup * Dismiss feature fixed * removed legacy temporary messages * Emote picker fix * Memory size debug * Build error fix * Sanity checks are okay sometimes * Lengthen channel name and finalize cleanup removal of Broadcast * Change DM to @ in order to unify on a single method * Continue unifying display, also show message status on the "isMine" lines * Add context for incoming messages * Better to say "in" vs "on" * crash fix for confirmation nodes * Fix outbound labels based to avoid creating delays * Eink autoscroll dissabled * gating for message storage when not using a screen * revert * Build fail fix * Don't error out with unset MAC address in unit tests * Provide some extra spacing for low hanging characters in messages * Reorder menu options and reword Respond * Reword menus to better reflect actions * Go to thread from favorite screen * Reorder Favorite Action Menu with simple word modifications * Consolidate wording on "Chats" * Mute channel fix * trunk fix * Clean up how muting works along with when we wake the screen * Fix builds for HELTEC_MESH_SOLAR * Signal bars for message ack * fix for notification renderer * Remove duplicate code, fix more Chats, and fix C6L MessageRenderer * Fix to many warnings related to BaseUI * preset aware signal strength display * More C6L fixes and clean up header lines * Use text aligns for message layout where necessary * Attempt to fix memory usage of invalidLifetime * Update channel mute for adjusted protobuf * Missed a comma in merge conflicts * cleanup to get more space * Trunk fixes * Optimize Hi Rez Chirpy to save space * more fixes * More cleanup * Remove used getConversationWith * Remove unused dismissNewestMessage * Fix another build error on occassion * Dimiss key combo function deprecated * More cleanup * Fn symbol code removed * Waypoint cleanup * Trunk fix * Fixup Waypoint screen with BaseUI code * Implement Haruki's ClockRenderer and broadcast decomposeTime across various files. * Revert "Implement Haruki's ClockRenderer and broadcast decomposeTime across various files." This reverts commit |
||
|
Jonathan Bennett
|
94db3506bd | Add LOG_POWERFSM and LOG_INPUT debug macros (#8791) | ||
|
Jonathan Bennett
|
0aa11d810c |
Clean up GPS toggle logging
Removed redundant log warnings for GPS toggle events. |
||
|
Tom FifieldandBen Meadors
|
df8b629c2c |
Clear position on GPS deactivation, unless using fixed position (#7464)
* Clear position on GPS deactivation, unless using fixed position As reported by @dreimal8 , and confirmed by @tuxmobil , when using and then subsequently disabling GPS the last position retrieved from the GPS was stored and continued to be broadcast. This change introduces a check to see if we are transitioning from GPS Enabled to GPS Disabled or Not Present. If we are, and fixed position is not in use, then we clear the local position. This will prevent inaccurate and undesired position broadcasts for those who disable their GPS. Fixes https://github.com/meshtastic/firmware/issues/7228 * Update triple click to also clear position --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Jonathan BennettandBen Meadors
|
36b94cf823 |
Unify the shutdown proceedure (#7393)
* Unify the shutdown proceedure * Don't double save nodeDB on shutdown * Re-tool button shutdown to better correspond to tones * Beep then save --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
|
a6be2e46ed |
2.7 fixes w2 (#7148)
* Initial work on splitting notification renderer into components for reuse * More progress * Fix notification popup * more fix, less crash * Adjustments for OLED on keeping menus tidy, added Bluetooth Toggle to Home frame. Also widen the frame slightly if you have a scroll bar * Small changes for EInk to not crowd elements * Change System frame menu over to better match actions; added color picker for T114 * Fix build errors and add T190 for testing * Logic gates are hard sometimes * Screen Color Picker changes, defined Yellow as a Color. * Additional colors and tuning * Abandon std::sort in NodeDB, and associated fixes (#7175) * Generate short name for nodes that don't have user yet * Add reboot menu * Sort fixes * noop sort option to avoid infinite loop * Refactor Overlay Banner * Continuing work on Color Picker * Add BaseUI menus to add and remove Favorited Nodes * Create TFT_MESH_OVERRIDE for variants.h and defined colors * Trigger a NodeStatus update at the end of setup() to get fresh data on display at boot. * T114 defaults to White, Yellow is now bright Yellow * Revert "T114 defaults to White, Yellow is now bright Yellow" This reverts commit |
||
|
porkcubeandJonathan Bennett
|
f6743798e2 |
cleanup Shutting down -> Shutting Down awkwardness (#7099)
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> |
||
|
|
29e7a71c97 |
2.7 Miscellaneous Fixes - Week 1 (#7102)
* Update Favorite Node Message Options to unify against other screens * Rebuild Horizontal Battery, Resolve overlap concerns * Update positioning on Message frame and fix drawCommonHeader overlay * Beginnings of creating isHighResolution bool * Fixup determineResolution() * Implement isHighResolution in place of SCREEN_WIDTH > 128 checks * Line Spacing bound to isHighResolution * Analog Clock for all * Add AM/PM to Analog Clock if isHighResolution and not TWatch * Simple Menu Queue, and add time menu * Fix prompt string for 12/24 hour picker * More menu banners into functions * Fix Action Menu on Home frame * Correct pop-up calculation size and continue to leverage isHighResolution * Move menu bits to MenuHandler * Plumb in the digital/analog picker * Correct Clock Face Picker title * Clock picker fixes * Migrate the rest of the menus to MenuHandler.* * Add compass menu and needle point option * Minor fix for compass point menu * Correct Home menu into typical format * Fix emoji bounce, overlap, and missing commonHeader * Sanitize long_names and removed unused variables * Slightly better sanitizeString variation * Resolved apostrophe being shown as upside down question mark * Gotta keep height and width in expected order * Remove Second Hand for Analog Clock on EInk displays * Fix Clock menu option decision tree * Improvements to Eink Navigation * Pause Banner for Eink moved to bottom * Updated working for 12-/24-hour menu and Added US/Arizona to timezone picker * Add Adhoc Ping and resolve error with std::string sanitized * Hide quick toggle as option is available within Action Menu, commented out for the moment * Remove old battery icon and option, use drawCommonHeader throughout, re-add battery to Clock frames * fix misc build warnings. NFC * Update Analog Clock on EInk to show more digits * Establish Action Menu on all node list screens, add NodeDB reset (with confirmation) option * Add Toggle Backlight for EInk Displays * Suppress action screen Full refresh for Eink * Adjust drawBluetoothConnectedIcon on TWatch * Maintain clock frame when switching between Clock Faces * Move modules beyond the clock in navigation * addressed the conflicts, and changed target branch to 2.7-MiscFixes-Week1 * cleanup, cheers * Add AM/PM to low resolution clock also * Small adjustments to AM/PM replacement across various devices * Resolve dangling pointer issues with sanitize code * Update comments for Screen.cpp related to module load change * Trunk runs * Update message caching to correct aged timestamp * Menu wording adjustments * Time Format wording * Use all the rows on EInk since with autohide the navigation bar * Finalize Time Format picker word change * Retired drawFunctionOverlay code No longer being used * Actually honor the points-north setting * Trunk * Compressed action list * Update no-op showOverlayBanner function * trunk * Correct T_Watch_S3 specific line * Autosized Action menu per screen * Finalize Autosized Action menu per screen * Unify Message Titles * Reorder Timezones to match expectations * Adjust text location for pop-ups * Revert "Actually honor the points-north setting" This reverts commit |
||
|
|
4feaec651f |
Unify the native display config between legacy display and MUI (#6838)
* Add missed include * Another Warning fix * Add another HAS_SCREEN * Namespace fixes * Removed depricated destination types and re-factored destination screen * Get rid of Arduino Strings * Clean up after Copilot * SixthLine Def, Screen Rename Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment * Consistency is hard - fixed "Sixth" * System Frame Updates Adjusted line construction to ensure we fit maximum content per screen. * Fix up notifications * Add a couple more ifdef HAS_SCREEN lines * Add screen->isOverlayBannerShowing() * Don't forget the invert! * Adjust Nodelist Center Divider Adjust Nodelist Center Divider * Fix variable casting * Fix entryText variable as empty before update to fix validation * Altitude is int32_t * Update PowerTelemetry to have correct data type * Fix cppcheck warnings (#6945) * Fix cppcheck warnings * Adjust logic in Power.cpp for power sensor --------- Co-authored-by: Jason P <applewiz@mac.com> * More pixel wrangling so things line up NodeList edition * Adjust NodeList alignments and plumb some background padding for a possible title fix * Better alignment for banner notifications * Move title into drawCommonHeader; initial screen tested * Fonts make spacing items difficult * Improved beeping booping and other buzzer based feedback (#6947) * Improved beeping booping and other buzzer based feedback * audible button feedback (#6949) * Refactor --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com> * Sandpapered the corners of the notification popup * Finalize drawCommonHeader migration * Update Title of Favorite Node Screens * Update node metric alignment on LoRa screen * Update the border for popups to separate it from background * Update PaxcounterModule.cpp with CommonHeader * Update WiFi screen with CommonHeader and related data reflow * It was not, in fact, pointing up * Fix build on wismeshtap * T-deck trackball debounce * Fix uptime on Device Focused page to actually detail * Update Sys screen for new uptime, add label to Freq/Chan on LoRa * Don't display DOP any longer, make Uptime consistent * Revert Uptime change on Favorites, Apply to Device Focused * Label the satelite number to avoid confusion * Boop boop boop boop * Correct GPS positioning and string consistency across strings for GPS * Fix GPS text alignment * Enable canned messages by default * Don't wake screen on new nodes * Cannedmessage list emote support added * Fn+e emote picker for freetext screen * Actually block CannedInput actions while display is shown * Add selection menu to bannerOverlay * Off by one * Move to unified text layouts and spacing * Still my Fav without an "e" * Fully remove EVENT_NODEDB_UPDATED * Simply LoRa screen * Make some char pointers const to fix compilation on native targets * Update drawCompassNorth to include radius * Fix warning * button thread cleanup * Pull OneButton handling from PowerFSM and add MUI switch (#6973) * Trunk * Onebutton Menu Support * Add temporary clock icon * Add gps location to fsi * Banner message state reset * Cast to char to satisfy compiler * Better fast handling of input during banner * Fix warning * Derp * oops * Update ref * Wire buzzer_mode * remove legacy string->print() * Only init screen if one found * Unsigned Char * More buttonThread cleaning * screen.cpp button handling cleanup * The Great Event Rename of 2025 * Fix the Radiomaster * Missed trackball type change * Remove unused function * Make ButtonThread an InputBroker * Coffee hadn't kicked in yet * Add clock icon for Navigation Bar * Restore clock screen definition code - whoops * ExternalNotifications now observe inputBroker * Clock rework (#6992) * Move Clock bits into ClockRenderer space * Rework clock into all device navigation * T-Watch Actually Builds Different * Compile fix --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add AM/PM to Digital Clock * Flip Seconds and AM/PM on Clock Display * Tik-tok pixels are hard * Fix builds on Thinknode M1 * Check for GPS and don't crash * Don't endif til the end * Rework the OneButton thread to be much less of a mess. (#6997) * Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * 24-hour Clock Should have leading zero, but not 12-hour * Fixup some compile errors * Add intRoutine to ButtonThread init, to get more responsive user button back * Add Timezone picker * Fix Warning * Optionally set the initial selection for the chooser popup * Make back buttons work in canned messages * Drop the wrapper classes * LonPressTime now configurable * Clock Frame can not longer be blank; just add valid time * Back buttons everywhere! * Key Verification confirm banner * Make Elecrow M* top button a back button * Add settings saves * EInk responsiveness fixes * Linux Input Fixes * Add Native Trackball/Joystick support, and move UserButton to Input * No Flight Stick Mode * Send input event * Add Channel Utilization to Device Focused frame * Don't shift screens when we draw new ones * Add showOverlayBanner arguments to no-op * trunk * Default Native trackball to NC * Fix crash in simulator mode * Add longLong button press * Get the args right * Adjust Bluetooth Pairing Screen to account for bottom navigation. * Trackball everywhere, and unPhone buttons * Remap visionmaster secondary button to TB_UP * Kill ScanAndSelect * trunk * No longer need the canned messages input filter * All Canned All the time * Fix stm32 compile error regarding inputBroker * Unify tft lineheights (#7033) * Create variable line heights based upon SCREEN_HEIGHT * Refactor textPositions into method -> getTextPositions * Update SharedUIDisplay.h --------- Co-authored-by: Jason P <applewiz@mac.com> * Adjust top distance for larger displays * Adjust icon sizes for larger displays * Fix Paxcounter compile errors after code updates * Pixel wrangling to make larger screens fit better * Alert frame has precedence over banner -- for now * Unify on ALT_BUTTON * Align AM/PM to the digit, not the segment on larger displays * Move some global pin defines into configuration.h * Scaffolding for BMM150 9-axis gyro * Alt button behavior * Don't add the blank GPS frames without HAS_GPS * EVENT_NODEDB_UPDATED has been retired * Clean out LOG_WARN messages from debugging * Add dismiss message function * Minor buttonThread cleanup * Add BMM150 support * Clean up last warning from dev * Simplify bmm150 init return logic * Add option to reply to messages * Add minimal menu upon selecting home screen * Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp * Properly dismiss message * T-Deck Trackball press is not user button * Add select on favorite frame to launch cannedMessage DM * Minor wording change * Less capital letters * Fix empty message check, time isn't reliable * drop dead code * Make UIRenderer a static class instead of namespace * Fix the select on favorite * Check if message is empty early and then 'return' * Add kb_found, and show the option to launch freetype if appropriate * Ignore impossible touchscreen touches * Auto scroll fix * Move linebreak after "from" for banners to maximize screen usage. * Center "No messages to show" on Message frame * Start consolidating buzzer behavior * Fixed signed / unsigned warning * Cast second parameter of max() to make some targets happy * Cast kbchar to (char) to make arduino string happy * Shorten the notice of "No messages" * Add buzzer mode chooser * Add regionPicker to Lora icon * Reduce line spacing and reorder Position screen to resolve overlapping issues * Update message titles, fix GPS icons, add Back options * Leftover boops * Remove chirp * Make the region selection dismissable when a region is already set * Add read-aloud functionality on messages w/ esp8266sam * "Last Heard" is a better label * tweak the beep * 5 options * properly tear down freetext upon cancel * de-convelute canned messages just a bit * Correct height of Mail icon in navigation bar * Remove unused warning * Consolidate time methods into TimeFormatters * Oops * Change LoRa Picker Cancel to Back * Tweak selection characters on Banner * Message render not scrolling on 5th line * More fixes for message scrolling * Remove the safety next on text overflow - we found that root cause * Add pin definitions to fix compilation for obscure target * Don't let the touchscreen send unitialized kbchar values * Make virtual KB just a bit quicker * No more double tap, swipe! * Left is left, and Right is right * Update horizontal lightning bolt design * Move from solid to dashed separator for Message Frame * Single emote feature fix * Manually sort overlapping elements for now * Freetext and clearer choices * Fix ESP32 InkHUD builds on the unify-tft branch (#7087) * Remove BaseUI branding * Capitalization is fun * Revert Meshtastic Boot Frame Changes * Add ANZ_433 LoRa region to picker * Update settings.json --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |