* Add gpsd support to portduino
* copilot fixes
* emit gps config in emit_yaml
* Fix formating to standard
* Address coderabitai issues
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add ARCH_PORTDUINO_WASM build: meshtasticd in WebAssembly over WebUSB
Compile the full portduino firmware to WebAssembly (Emscripten) so a real node runs in a browser tab or headless Node, driving a LoRa radio over WebUSB through a CH341 — the desktop Ch341Hal path with its libusb backend swapped for a WebUSB one. The native/desktop portduino build is unchanged.
New build env under src/platform/portduino/wasm/ (excluded from the native build_src_filter): WebUSB libpinedio backend, config/FS/region/MAC/PhoneAPI glue, wasm setup/loop, JS WebUSB runtime, and build stubs. bin/build-portduino-wasm.sh runs a standalone cached emcc build to build/wasm/meshnode.{mjs,wasm}.
Six firmware sources gain #ifdef ARCH_PORTDUINO_WASM guards (single-threaded cooperative emscripten_sleep loop, continuous RX, US region default, std RNG, no-popen exec); none affect non-wasm builds.
* PortDuino WASM: CI build job, cross-platform libdeps, configurable adapter
bin/build-portduino-wasm.sh: auto-detect native-macos (macOS) vs native (Linux/CI) libdeps with a NATIVE_ENV override, and use the SAME env's Crypto with an XEdDSA-present guard. Drops the heltec-v3/Crypto borrow — the meshtastic/Crypto pin already ships XEdDSA; the native libdeps cache was just stale. No env pin change.
Add .github/workflows/build_portduino_wasm.yml: build the ARCH_PORTDUINO_WASM target in CI (ubuntu + emsdk, native libdeps) so it can't silently bit-rot; asserts build/wasm/meshnode.{mjs,wasm}.
src/platform/portduino/wasm: add wasm_set_lora_* setters so the JS host can configure any CH341 LoRa adapter (module, USB ids, DIO/TCXO, SPI speed, pins); wasm_config_apply falls back to the MeshToad defaults when unset.
* WASM: build as a first-class [env:wasm] via platform-wasm (retire emcc script)
Replace the standalone emcc build (bin/build-portduino-wasm.sh) with a normal
PlatformIO env, `pio run -e wasm`, using the new meshtastic/platform-wasm
platform (emcc/em++ + Asyncify, the WASM sibling of platform-native). The
portduino WebAssembly node is now built the same way as every other target.
- variants/native/portduino/platformio.ini: add [env:wasm] (platform pinned to
platform-wasm, board wasm). Translates the script's source set into a curated
build_src_filter, the ~30 EXCLUDE_* defines, and the lib set; defines
ARCH_PORTDUINO_WASM in-repo so correctness doesn't hinge on the platform's
board.json.
- extra_scripts/wasm_link_flags.py: the firmware-specific emcc *link* settings
(EXPORT_NAME, EXPORTED_RUNTIME_METHODS, EXPORTED_FUNCTIONS, ASYNCIFY_IMPORTS).
PlatformIO feeds build_flags to compile only, so these must ride LINKFLAGS;
without it the WebUSB Asyncify seam and the JS host's runtime methods are
dropped (the _wasm_* exports survive only via EMSCRIPTEN_KEEPALIVE).
- PortduinoGlue.{h,cpp}: guard the yaml-cpp dependency out of the WASM build
(#ifndef ARCH_PORTDUINO_WASM around the include, emit_yaml/loadConfig/
readGPIOFromYaml). The browser node configures via the wasm_set_lora_* setters
and dead-strips the YAML path; this drops the host yaml-cpp build dependency
entirely. Native is unchanged (guards are inert there).
- portduino_glue_wasm.cpp / portduino_main_wasm.cpp: repair EM_ASM JS that a
formatter had mangled (!== -> != =, regex split) in the prior landing; the
emcc link succeeds regardless, so CI now runs `node --check meshnode.mjs`.
- .github/workflows/build_portduino_wasm.yml: build via `pio run -e wasm`
(artifacts under .pio/build/wasm/), trigger on the shared inputs the env
inherits (root platformio.ini, bin/platformio-*.py).
- NodeDB.cpp: drop the dead ARCH_PORTDUINO_WASM region-default branch (region
now defaults the same as native).
- Crypto renovate pins: add the missing gitBranch so they track upstream.
Output: .pio/build/wasm/meshnode.{mjs,wasm} (ES module, factory createMeshNode).
Verified: pio run -e wasm (against the published platform archive), node --check,
module instantiates in Node with all exports; native-macos + Docker native unit
tests (450/450) still pass.
* Fix name on the Piggystick
* wasm: pin platform-wasm at the GPL-3.0-relicensed commit
platform-wasm's LICENSE was always GPLv3 (matching this firmware), but its
platform.json/README still declared Apache-2.0 (mis-copied from platform-native).
That's fixed upstream in b83fa5b; bump the [env:wasm] pin to it. Build output is
unchanged (license metadata only). Verified: pio run -e wasm against b83fa5b.
* wasm: make reboot() actually restart the node (was a no-op)
In wasm the reboot path is live (main.cpp -> Power::powerCommandsCheck ->
Power::reboot), but Power::reboot's ARCH_PORTDUINO arm tore down SPI/Wire/Serial
and then called the no-op ::reboot() stub — leaving the node running with a dead
radio until the tab was manually reloaded. Triggers include an admin/phone
reboot, factory reset, the "reconfigure failed" path, and the 60 s stuck-TX
hardware watchdog (RadioLibInterface).
- Power::reboot(): add an ARCH_PORTDUINO_WASM arm (before ARCH_PORTDUINO, since
the wasm build defines both) that skips the host teardown and just calls
::reboot(). notifyReboot already let modules persist.
- ::reboot() (glue): hand off to the JS host — browser reloads the tab (NodeDB
state survives via IDBFS, same identity returns); headless calls Module.onReboot
if provided, else logs. Loose !=/== so clang-format doesn't mangle the EM_ASM JS.
- README: document the reboot handoff + the Module.onReboot hook.
Verified: pio run -e wasm + node --check (EM_ASM intact); native-macos unaffected.
* wasm: rename env to native-wasm and run it in the main CI matrix
Rename [env:wasm] -> [env:native-wasm] for consistency with the portduino
native family (native, native-macos, native-tft). The build dir follows to
.pio/build/native-wasm/ (artifact is still meshnode.{mjs,wasm}); the PIOENV
guard in extra_scripts/wasm_link_flags.py, the README, and the companion wrapper
move with it. The board stays `wasm`.
Also wire the build into normal CI: build_portduino_wasm.yml becomes a reusable
workflow (workflow_call) invoked as the `build-wasm` job of main_matrix.yml, so
the WebAssembly node is built like every other platform instead of on a separate
path trigger.
* native-wasm: auto-locate the Emscripten SDK (pre-build script)
`pio run -e native-wasm` failed with "emcc not found" whenever it was invoked
from a shell that hadn't sourced emsdk_env.sh — a VS Code task, an IDE build
button, a bare terminal. Add a pre: extra script that probes the usual emsdk
locations ($EMSDK_ENV, $EMSDK, ~/emsdk, ./.emsdk, the sibling companion
checkout), sources emsdk_env.sh, and imports the resulting environment so the
platform builder and emcc see PATH/EMSDK/EM_CONFIG. No-op when emcc is already
reachable (CI), silent when no SDK is found (the platform emits its own error).
* wasm: address PR review feedback
- js/bridge.js: import CH341 from "./ch341.js" (sibling in this layout), not
"../src/ch341.js" which doesn't resolve here.
- js/ch341.js: a zero-length transferIn while MISO bytes are still outstanding
now throws instead of breaking out with a partially-filled buffer — silent SPI
corruption becomes a loud error, matching the comment above it.
- libpinedio_webusb.c: webusb_set_auto_cs honors the AUTO_CS option (? 1 : 0)
instead of the always-on ? 1 : 1. Runtime behavior is unchanged — Ch341Hal sets
AUTO_CS=0 right after pinedio_init (RadioLib drives the active-low NSS); the
option just isn't set yet at init, so this now correctly defaults off.
- SX126xInterface.cpp: the RX-start error log now names the method actually
called (startReceive vs startReceiveDutyCycleAuto) instead of hardcoding the
duty-cycle name in the WASM branch.
* native-wasm: drop the emsdk bootstrap shim (now in platform-wasm)
The Emscripten SDK auto-location moved into the platform-wasm builder, so the
firmware no longer needs its own pre: extra script. Remove
extra_scripts/wasm_emsdk_env.py and bump the platform pin to the build that
carries the bootstrap. The wasm_link_flags.py post script stays — those exported
fns / runtime methods / Asyncify import seam are firmware-app-specific.
* wasm: use the canonical companion name (meshtasticd-wasm-node)
The companion repo was renamed meshtastic-web-node -> meshtasticd-wasm-node; fix
the stale name in the wasm README and bump the platform pin to the build that
promotes the canonical name in its emsdk auto-location.
* wasm: re-entrancy guard for the API/region entry points + flaky-open retry
Two robustness fixes for the browser node:
- Re-entrancy guard. The node is single-threaded + Asyncify: while setup()/loop()
is suspended inside a WebUSB transfer, the JS event loop is free, so a stray
DOM/timer callback that re-enters a wasm_* entry point starts a second Asyncify
unwind ("async operation already in flight" abort) or clobbers shared PhoneAPI
state (observed as a "PhoneAPI::available unexpected state" flood). Add a
g_wasm_in_firmware flag set around setup()/loop() (portduino_main_wasm.cpp); the
wasm_set_region / wasm_api_to_radio / wasm_api_from_radio / wasm_api_available
entry points now reject a mid-tick call (return busy) instead of corrupting or
aborting. The host must still call them between ticks — this is the safety net
the design lacked, not a substitute for the JS queue.
- CH341 open retry (js/bridge.js). First-connect WebUSB is flaky — the interface
is briefly unclaimable right after the grant, or held by a prior session,
giving a transient "Could not open SPI: -1". Retry the open with a short
backoff, closing the device between attempts so claimInterface starts clean.
* wasm: exclude emscripten-only sources from cppcheck
The `check` board matrix runs `pio check` (cppcheck) over all of src/,
including src/platform/portduino/wasm/. cppcheck can't parse the EM_ASYNC_JS/
EM_JS macros (Syntax Error: AST broken at libpinedio_webusb.c:39,
internalAstError) and these sources are not part of any checked board build
([env:native-wasm] is board_level=extra, compiled by the build-wasm CI job).
Suppress the wasm dir in suppressions.txt, the same way generated/ and .pio/
are already excluded.
* wasm: coalesce FS.syncfs so two never run at once
IDBFS syncfs is async; the explicit wasm_fs_sync (5s timer + post-save +
beforeunload) could overlap a prior in-flight sync, warning "2 FS.syncfs
operations in flight at once". Serialize: if a sync is running, mark a pending
re-sync and let the in-flight one chain it on completion — at most one in flight,
trailing writes still flushed. (Companion drops IDBFS autoPersist so this is the
single persistence path.)
* wasm: silence false-positive SAST on the emscripten glue
- extra_scripts/wasm_link_flags.py: restore the trunk-ignore-all(ruff/F821,
flake8/F821) header every other SCons extra_script carries; Import/env are
SConscript-injected globals, so ruff/flake8 flag them as undefined.
- .semgrepignore: exclude src/platform/portduino/wasm/js/ (browser WebUSB glue,
not part of the firmware binary). The unsafe-formatstring rule false-positives
on its benign retry/diagnostic console logs.
* Update .github/workflows/build_portduino_wasm.yml
Co-authored-by: Austin <vidplace7@gmail.com>
---------
Co-authored-by: Austin <vidplace7@gmail.com>
* Refactor memory management in Syslog and StoreForwardModule
* Implement destructor for Lock
* Refactor RotaryEncoder and PacketHistory to use smart pointers for better memory management
* CH341 should use unique_ptr for improved memory management
* Fix checks in PH
* Improve Syslog::vlogf to handle variable argument lists more safely
* Fix initOk method to use nullptr for null pointer check
* Fix MAC_from_string to use input parameter instead of global config for MAC address parsing
* Enhance MAC_from_string validation and error handling
* Add missing include for <cctype> in PortduinoGlue.cpp
* macOS: enable CH341 LoRa-hardware path — fix serial truncation, document setup
Verified on Apple Silicon with a CH341A USB-SPI bridge (VID 0x1A86,
PID 0x5512) wired to an SX1262 (Meshstick variant) that the existing
`pine64/libch341-spi-userspace` lib_dep works on macOS as-is — Apple's
bundled CH34x driver only matches the CH340 *UART* variant
(PID 0x7523), so the CH341A's interface 0 is left unclaimed and
libusb opens / configures / claims it directly via IOUSBHostInterface.
End-to-end test: meshtasticd boots, libusb claim succeeds, SX1262 init
returns 0, TCP API serves the meshtastic CLI's --info / --sendtext flow.
Two changes:
1. **`PortduinoGlue.cpp:497`**: pass `sizeof(serial)` (= 9) instead of
the literal `8` to `Ch341Hal::getSerialString()`. The function in
`USBHal.h:61-68` treats `len` as buffer size and reserves one slot
for the null terminator (`bytesCopied = (len - 1) < 8 ? (len - 1) : 8`),
so passing 8 produced a 7-char serial — which then broke the
`strlen(serial) == 8` check at line 502, skipping the auto-MAC
derivation from serial + product string. On Linux this was masked
by the BlueZ HCI MAC fallback in `getMacAddr()` at lines 139-157,
but on macOS that fallback is `__linux__`-guarded so the serial path
is mandatory and the truncation left `mac_address` empty, causing
the daemon to exit with `*** Blank MAC Address not allowed!`.
2. **`variants/native/portduino/platformio.ini`**: expand the
`[env:native-macos]` comment block with a "Real LoRa hardware on
macOS" section. Documents:
- Why no upstream library change is needed (Apple kext targets
CH340/UART, not CH341A/SPI; libusb's `#ifdef __linux__` skip is
correct for macOS in this case).
- How to point `meshtasticd` at an existing platform-agnostic
`bin/config.d/lora-*.yaml` for CH341 hardware.
- The auto-MAC-derivation contract (now working with this fix).
- `ioreg` and `LIBUSB_DEBUG=4` diagnostic recipes for the failure
mode where a third-party WCH `CH34xVCPDriver` *would* claim
interface 0 (`kmutil unload -b <bundleID>` workaround).
No upstream library forks, no PR chain, no additional lib_deps —
the existing `pine64/libch341-spi-userspace` + libusb-1.0 stack does
the right thing on macOS already.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* macOS: enable CH341 LoRa-hardware path — fix serial truncation, document setup
Verified on Apple Silicon with a CH341A USB-SPI bridge (VID 0x1A86,
PID 0x5512) wired to an SX1262 (Meshstick variant) that the existing
`pine64/libch341-spi-userspace` lib_dep works on macOS as-is — Apple's
bundled CH34x driver only matches the CH340 *UART* variant
(PID 0x7523), so the CH341A's interface 0 is left unclaimed and
libusb opens / configures / claims it directly via IOUSBHostInterface.
End-to-end test: meshtasticd boots, libusb claim succeeds, SX1262 init
returns 0, TCP API serves the meshtastic CLI's --info / --sendtext flow.
Two changes:
1. **`PortduinoGlue.cpp:497`**: pass `sizeof(serial)` (= 9) instead of
the literal `8` to `Ch341Hal::getSerialString()`. The function in
`USBHal.h:61-68` treats `len` as buffer size and reserves one slot
for the null terminator (`bytesCopied = (len - 1) < 8 ? (len - 1) : 8`),
so passing 8 produced a 7-char serial — which then broke the
`strlen(serial) == 8` check at line 502, skipping the auto-MAC
derivation from serial + product string. On Linux this was masked
by the BlueZ HCI MAC fallback in `getMacAddr()` at lines 139-157,
but on macOS that fallback is `__linux__`-guarded so the serial path
is mandatory and the truncation left `mac_address` empty, causing
the daemon to exit with `*** Blank MAC Address not allowed!`.
2. **`variants/native/portduino/platformio.ini`**: expand the
`[env:native-macos]` comment block with a "Real LoRa hardware on
macOS" section. Documents:
- Why no upstream library change is needed (Apple kext targets
CH340/UART, not CH341A/SPI; libusb's `#ifdef __linux__` skip is
correct for macOS in this case).
- How to point `meshtasticd` at an existing platform-agnostic
`bin/config.d/lora-*.yaml` for CH341 hardware.
- The auto-MAC-derivation contract (now working with this fix).
- `ioreg` and `LIBUSB_DEBUG=4` diagnostic recipes for the failure
mode where a third-party WCH `CH34xVCPDriver` *would* claim
interface 0 (`kmutil unload -b <bundleID>` workaround).
No upstream library forks, no PR chain, no additional lib_deps —
the existing `pine64/libch341-spi-userspace` + libusb-1.0 stack does
the right thing on macOS already.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Add Portduino Enable pins
* Add hat plus custom fields
* Punt on the GPIO device detection for now
* Simplify TX_GAIN_LORA for RAK13302
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add GPIO_DETECT_PA portduino config, and support 13302 detection with it.
* Tweak PA detect gpio to use pinMapping
* minor yaml output fixes
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* simplify the observer pattern, since all the called functions are const getters.
* use arduino macro over std: for numerical values and refactor local variables in drawScrollbar()
* oh, so Cppcheck actually complained about const pointers not being const.
* slowly getting out of ifdef hell
* fix inkHUD warnings as well
* last 2 check warnings
* git checks should fail on low defects from now on
* run trunk fmt -a
* fix bracket bug
This was introduced by @tedwardd and @thebentern in 021106dfe5.
See this diff:
else
+ checkConfigPort = false;
printf("Using config file %d\n", TCPPort);
* Add support for setting API port from the config file
* Update PortduinoGlue.cpp
Fix typo in var identifier
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit 0d11331d18.
* First try at multimessage storage and display
* Nrf built issue fix
* Message view mode
* Add channel name instead of channel slot
* trunk fix
* Fix for DM threading
* fix for message time
* rename of view mode to Conversations
* Reply in thread feature
* rename Select View Mode to Select Conversation
* dismiss all live fix
* Messages from phone show on screen
* Decoupled message packets from screen.cpp and cleaned up
* Cannedmessage cleanup and emotes fixed
* Ack on messages sent
* Ack message cleanup
* Dismiss feature fixed
* removed legacy temporary messages
* Emote picker fix
* Memory size debug
* Build error fix
* Sanity checks are okay sometimes
* Lengthen channel name and finalize cleanup removal of Broadcast
* Change DM to @ in order to unify on a single method
* Continue unifying display, also show message status on the "isMine" lines
* Add context for incoming messages
* Better to say "in" vs "on"
* crash fix for confirmation nodes
* Fix outbound labels based to avoid creating delays
* Eink autoscroll dissabled
* gating for message storage when not using a screen
* revert
* Build fail fix
* Don't error out with unset MAC address in unit tests
* Provide some extra spacing for low hanging characters in messages
* Reorder menu options and reword Respond
* Reword menus to better reflect actions
* Go to thread from favorite screen
* Reorder Favorite Action Menu with simple word modifications
* Consolidate wording on "Chats"
* Mute channel fix
* trunk fix
* Clean up how muting works along with when we wake the screen
* Fix builds for HELTEC_MESH_SOLAR
* Signal bars for message ack
* fix for notification renderer
* Remove duplicate code, fix more Chats, and fix C6L MessageRenderer
* Fix to many warnings related to BaseUI
* preset aware signal strength display
* More C6L fixes and clean up header lines
* Use text aligns for message layout where necessary
* Attempt to fix memory usage of invalidLifetime
* Update channel mute for adjusted protobuf
* Missed a comma in merge conflicts
* cleanup to get more space
* Trunk fixes
* Optimize Hi Rez Chirpy to save space
* more fixes
* More cleanup
* Remove used getConversationWith
* Remove unused dismissNewestMessage
* Fix another build error on occassion
* Dimiss key combo function deprecated
* More cleanup
* Fn symbol code removed
* Waypoint cleanup
* Trunk fix
* Fixup Waypoint screen with BaseUI code
* Implement Haruki's ClockRenderer and broadcast decomposeTime across various files.
* Revert "Implement Haruki's ClockRenderer and broadcast decomposeTime across various files."
This reverts commit 2f65721774.
* Implement Haruki's ClockRenderer and broadcast decomposeTime across various files. Attempt 2!
* remove memory usage debug
* Revert only RangeTestModule.cpp change
* Switch from dynamic std::string storage to fixed-size char[]
* Removing old left over code
* More optimization
* Free Heap when not on Message screen
* build error fixes
* Restore ellipsis to end of long names
* Remove legacy function renderMessageContent
* improved destination filtering
* force PKI
* cleanup
* Shorten longNames to not exceed message popups
* log messages sent from apps
* Trunk fix
* Improve layout of messages screen
* Fix potential crash for undefined variable
* Revert changes to RedirectablePrint.cpp
* Apply shortening to longNames in Select Destination
* Fix short name displays
* Fix sprintfOverlappingData issue
* Fix nullPointerRedundantCheck warning on ESP32
* Add "Delete All Chats" to all chat views
* Improve getSafeNodeName / sanitizeString code.
* Improve getSafeNodeName further
* Restore auto favorite; but only if not CLIENT_BASE
* Don't favorite if WE are CLIENT_BASE role
* Don't run message persistent in MUI
* Fix broken endifs
* Unkwnown nodes no longer show as ??? on message thread
* More delete options and cleanup of code
* fix for delete this chat
* Message menu cleanup
* trunk fix
* Clean up some menu options and remove some Unit C6L ifdefines
* Rework Delete flow
* Desperate times call for desperate measures
* Create a background on the connected icon to reduce overlap impact
* Optimize code for background image
* Fix for Muzi_Base
* Trunk Fixes
* Remove the up/down shortcut to launch canned messages (#8370)
* Remove the up/down shortcut to launch canned messages
* Enabled MQTT and WEBSERVER by default (#8679)
Signed-off-by: kur1k0 <zhuzirun@m5stack.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
---------
Signed-off-by: kur1k0 <zhuzirun@m5stack.com>
Co-authored-by: Riker <zhuzirun@m5stack.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Correct string length calculation for signal bars
* Manual message scrolling
* Fix
* Restore CannedMessages on Home Frame
* UpDown situational destination for textMessage
* Correct up/down destinations on textMessage frame
* Update Screen.h for handleTextMessage
* Update Screen.cpp to repair a merge issue
* Add nudge scroll on UpDownEncoder devices.
* Set nodeName to maximum size
* Revert "Set nodeName to maximum size"
This reverts commit e254f39925.
* Reflow Node Lists and TLora Pager Views (#8942)
* Add files via upload
* Move files into the right place
* Short or Long Names for everyone!
* Add scrolling to Node list
* Pagination fix for Latest to oldest per page
* Page counters
* Dynamic scaling of column counts based upon screen size, clean up box drawing
* Reflow Node Lists and TLora Pager Views (#8942)
* Add files via upload
* Move files into the right place
* Short or Long Names for everyone!
* Add scrolling to Node list
* Pagination fix for Latest to oldest per page
* Page counters
* Dynamic scaling of column counts based upon screen size, clean up box drawing
* Update exempt labels for stale bot workflow
Adds triaged and backlog to the list of exempt labels.
* Update naming of Frame Visibility toggles
* Fix to scrolling
* Fix for content cutting off when from us
* Fix for "delete this chat" now it does delete the current one
* Rework isHighResolution to be an enum called ScreenResolution
* Migrate Unit C6L macro guards into currentResolution UltraLow checks
* Mistakes happen - restoring NodeList Renderer line
---------
Signed-off-by: kur1k0 <zhuzirun@m5stack.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Riker <zhuzirun@m5stack.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: whywilson <m.tools@qq.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Start portduino_config refactor
* refactor GPIOs to new portduino_config
* More portduino_config work
* More conversion to portduino_config
* Finish portduino_config transition
* trunk
* yaml output work
* Simplify the GPIO config
* Trunk
Tom