* Power off control pin on Thinknode m5 during deepsleep
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Finish HAS_RTC cleanup
* Add RTC for Thinknode M5
* Don't double-init Wire
* Specify the RTC chip directly rather than use SensorRtcHelper.
Saves a bit of flash, and avoid mis-detection
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Improve NRF52 bluetooth power efficiency
* test T114 bad LFXO
* T1000 test
* force BLE param negotiation
* stash
* NRF52 bluetooth small cleanup
* fix potential connectivity issues
* lower BLE min interval to make iOS happy
* remove slave latency negotation
* add BLE issue comment
* code format
* Revert "code format"
This reverts commit 1f92b09d08.
* remove LFCLK debug info
* Fix
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Make BLE TX power configurable for nRF52 variants
* Include BLE TX power setting in T114 variant.h as tested
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* run trunk fmt -a
* fix bracket bug
This was introduced by @tedwardd and @thebentern in 021106dfe5.
See this diff:
else
+ checkConfigPort = false;
printf("Using config file %d\n", TCPPort);
* Add support for setting API port from the config file
* Update PortduinoGlue.cpp
Fix typo in var identifier
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Initial commit of combined BLE and WiFi OTA
* Incorporate ota_hash in AdminMessage protobuf
* OTA protobuf changes
* Trunk fmt
* Partition header check for OTA type
* Guards
* Guards
* Derp
* Missed one
---------
Co-authored-by: Jake-B <jake-b@users.noreply.github.com>
* Preliminary Thinknode M4 Support
* oops
* Fix RF switch TX configuration
* trunk'd
* GPS fix for M4
* Battery handling and LED for M4
* Trunk
* Drop debug warnings
* Make Red LED notification
* Merge cleanup
* Make white LEDs flash during charge
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Initial commit of combined BLE and WiFi OTA
* Incorporate ota_hash in AdminMessage protobuf
* OTA protobuf changes
* Trunk fmt
---------
Co-authored-by: Jake-B <jake-b@users.noreply.github.com>
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit 0d11331d18.
* First try at multimessage storage and display
* Nrf built issue fix
* Message view mode
* Add channel name instead of channel slot
* trunk fix
* Fix for DM threading
* fix for message time
* rename of view mode to Conversations
* Reply in thread feature
* rename Select View Mode to Select Conversation
* dismiss all live fix
* Messages from phone show on screen
* Decoupled message packets from screen.cpp and cleaned up
* Cannedmessage cleanup and emotes fixed
* Ack on messages sent
* Ack message cleanup
* Dismiss feature fixed
* removed legacy temporary messages
* Emote picker fix
* Memory size debug
* Build error fix
* Sanity checks are okay sometimes
* Lengthen channel name and finalize cleanup removal of Broadcast
* Change DM to @ in order to unify on a single method
* Continue unifying display, also show message status on the "isMine" lines
* Add context for incoming messages
* Better to say "in" vs "on"
* crash fix for confirmation nodes
* Fix outbound labels based to avoid creating delays
* Eink autoscroll dissabled
* gating for message storage when not using a screen
* revert
* Build fail fix
* Don't error out with unset MAC address in unit tests
* Provide some extra spacing for low hanging characters in messages
* Reorder menu options and reword Respond
* Reword menus to better reflect actions
* Go to thread from favorite screen
* Reorder Favorite Action Menu with simple word modifications
* Consolidate wording on "Chats"
* Mute channel fix
* trunk fix
* Clean up how muting works along with when we wake the screen
* Fix builds for HELTEC_MESH_SOLAR
* Signal bars for message ack
* fix for notification renderer
* Remove duplicate code, fix more Chats, and fix C6L MessageRenderer
* Fix to many warnings related to BaseUI
* preset aware signal strength display
* More C6L fixes and clean up header lines
* Use text aligns for message layout where necessary
* Attempt to fix memory usage of invalidLifetime
* Update channel mute for adjusted protobuf
* Missed a comma in merge conflicts
* cleanup to get more space
* Trunk fixes
* Optimize Hi Rez Chirpy to save space
* more fixes
* More cleanup
* Remove used getConversationWith
* Remove unused dismissNewestMessage
* Fix another build error on occassion
* Dimiss key combo function deprecated
* More cleanup
* Fn symbol code removed
* Waypoint cleanup
* Trunk fix
* Fixup Waypoint screen with BaseUI code
* Implement Haruki's ClockRenderer and broadcast decomposeTime across various files.
* Revert "Implement Haruki's ClockRenderer and broadcast decomposeTime across various files."
This reverts commit 2f65721774.
* Implement Haruki's ClockRenderer and broadcast decomposeTime across various files. Attempt 2!
* remove memory usage debug
* Revert only RangeTestModule.cpp change
* Switch from dynamic std::string storage to fixed-size char[]
* Removing old left over code
* More optimization
* Free Heap when not on Message screen
* build error fixes
* Restore ellipsis to end of long names
* Remove legacy function renderMessageContent
* improved destination filtering
* force PKI
* cleanup
* Shorten longNames to not exceed message popups
* log messages sent from apps
* Trunk fix
* Improve layout of messages screen
* Fix potential crash for undefined variable
* Revert changes to RedirectablePrint.cpp
* Apply shortening to longNames in Select Destination
* Fix short name displays
* Fix sprintfOverlappingData issue
* Fix nullPointerRedundantCheck warning on ESP32
* Add "Delete All Chats" to all chat views
* Improve getSafeNodeName / sanitizeString code.
* Improve getSafeNodeName further
* Restore auto favorite; but only if not CLIENT_BASE
* Don't favorite if WE are CLIENT_BASE role
* Don't run message persistent in MUI
* Fix broken endifs
* Unkwnown nodes no longer show as ??? on message thread
* More delete options and cleanup of code
* fix for delete this chat
* Message menu cleanup
* trunk fix
* Clean up some menu options and remove some Unit C6L ifdefines
* Rework Delete flow
* Desperate times call for desperate measures
* Create a background on the connected icon to reduce overlap impact
* Optimize code for background image
* Fix for Muzi_Base
* Trunk Fixes
* Remove the up/down shortcut to launch canned messages (#8370)
* Remove the up/down shortcut to launch canned messages
* Enabled MQTT and WEBSERVER by default (#8679)
Signed-off-by: kur1k0 <zhuzirun@m5stack.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
---------
Signed-off-by: kur1k0 <zhuzirun@m5stack.com>
Co-authored-by: Riker <zhuzirun@m5stack.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Correct string length calculation for signal bars
* Manual message scrolling
* Fix
* Restore CannedMessages on Home Frame
* UpDown situational destination for textMessage
* Correct up/down destinations on textMessage frame
* Update Screen.h for handleTextMessage
* Update Screen.cpp to repair a merge issue
* Add nudge scroll on UpDownEncoder devices.
* Set nodeName to maximum size
* Revert "Set nodeName to maximum size"
This reverts commit e254f39925.
* Reflow Node Lists and TLora Pager Views (#8942)
* Add files via upload
* Move files into the right place
* Short or Long Names for everyone!
* Add scrolling to Node list
* Pagination fix for Latest to oldest per page
* Page counters
* Dynamic scaling of column counts based upon screen size, clean up box drawing
* Reflow Node Lists and TLora Pager Views (#8942)
* Add files via upload
* Move files into the right place
* Short or Long Names for everyone!
* Add scrolling to Node list
* Pagination fix for Latest to oldest per page
* Page counters
* Dynamic scaling of column counts based upon screen size, clean up box drawing
* Update exempt labels for stale bot workflow
Adds triaged and backlog to the list of exempt labels.
* Update naming of Frame Visibility toggles
* Fix to scrolling
* Fix for content cutting off when from us
* Fix for "delete this chat" now it does delete the current one
* Rework isHighResolution to be an enum called ScreenResolution
* Migrate Unit C6L macro guards into currentResolution UltraLow checks
* Mistakes happen - restoring NodeList Renderer line
---------
Signed-off-by: kur1k0 <zhuzirun@m5stack.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Riker <zhuzirun@m5stack.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: whywilson <m.tools@qq.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Mark implicit ACK for MQTT as MQTT transport
* TRUNK
* Fix build
* Make sure implicit ACKs from MQTT do not stop retransmissions in ReliableRouter
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Improve NRF52 bluetooth power efficiency
* test T114 bad LFXO
* T1000 test
* force BLE param negotiation
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add initial support for Hackaday Communicator
* Fork it!
* Trunk
* Remove unused elements from the HackadayCommunicatorKeyboard
* Don't divide by zero.
* remove duplicate HAS_LP5562 introduced by #6422
* add ST7796
* changes to get display centered+lib update
* seperated from tbeam
* forgot the simple scan case
* lowered speeds to 1/4
* added SPI Speed to constructor+ cleaned up variant.h
* even slower speeds....
* add ST7796
* changes to get display centered+lib update
* seperated from tbeam
* forgot the simple scan case
* lowered speeds to 1/4
* added SPI Speed to constructor+ cleaned up variant.h
* even slower speeds....
* changed variant name to tbeam-displayshield
* modified variant.h and merged ini file+testing on lower spi frequency for the lora module, display shield pumps out EMI?
* try higher speeds + HSPI
* cleanup of redundant code
* refelct changes?
* trunk fmt
* testing touchscreen code
* further testing
* changed to sensorlib 0.3.1
* i broke it , dont know how to fix at the moment will investigate
* add -1 functionality for touch IRQ
* revert to working example?
* it works.... is pressed was not working properly
* working touchscreen but gestures not moving display
* swap XY+ mirror X
* cleanup + addition of defines for on screen keyboard and canned message module
* removed debug lines, disabled bluetooth for now because of stack smashing protect failure
* reverted the revert #6640 + increased speed, bleutooth is stable now on reconnection cold booth etc , GPS is still not working though
* remove debug + add fixed baudrate for gps
* fmt
* revert NIMble
* changed display library to meshtastic org
* removed baudrate of 115200 and some commented out code
* Correct spelling
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Typo
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* display speed x10
* resolve conflicts
* undo
* revert speed increase CPU
* add SCREEN_TRANSITION_FRAMERATE 5
* spi speed increase of the display
* using the original touchscreen implementation
* removal of H file line
* add USE_ST7796 to missing places
* removed is pressed + interrupt
* revert changes of settings.json
* update to screen.cpp
* test identification of CST226 and CST328
* Update src/configuration.h
typo
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* made changes to detection because it was completely wrong, CST226SE has 2 posible adresses
* add merge queue
* try vars
* kerning in yaml.
* update comment
* lint etc
* touching to check grandfathering
* explicit ignores
* add WIP for Unit C6L (#7433)
* add WIP for Unit C6L
* adapt to new config structure
* Add c6l BLE and screen support (#7991)
* Minor c6l fix
* Move out of PRIVATE_HW
---------
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <Xaositek@users.noreply.github.com>
Co-authored-by: Markus <Links2004@users.noreply.github.com>
* Update Adafruit BusIO to v1.17.3 (#8018)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Update actions/checkout action to v5 (#8020)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Update actions/setup-python action to v6 (#8023)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Upgrade trunk (#8025)
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
* Update actions/download-artifact action to v5 (#8021)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Fix init for InputEvent (#8015)
* Automated version bumps (#8028)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Allow Left / Right Events for selection and improve encoder responsives (#8016)
* Allow Left / Right Events for selection and improve encoder responsives
* add define for ROTARY_DELAY
* T-Lora Pager: Support LR1121 and SX1280 models (#7956)
* T-Lora Pager: Support LR1121 and SX1280 models
* Remove ifdefs
* (resubmission) Manual GitHub actions to allow building one target or arch (#7997)
* Reset the modified files
* Fix some changes
* Fix some changes
* Trunk. That is all.
---------
Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>
* BaseUI Show/Hide Frame Functionality (#7382)
* Rename System Frame (from Memory) in code base
* Create menu options to Show/Hide frames: Node Lists, Bearings, Position, LoRa, Clock and Favorites frames
* Move Region Picker into submenu
* Tweak wording for Send Position vs Node Info if the device has GPS
* Update actions/checkout action to v5 (#8031)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Update actions/download-artifact action to v5 (#8032)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Update actions/setup-python action to v6 (#8033)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Phone GPS display on Position Screen for BaseUI (#7875)
* Phone GPS display on Position Screen
This is a PR to show when a phone shares GPS location with the node so you can reliably know what coordinate is being shared with the Mesh.
* Merge pull request #8004 from compumike/compumike/debug-heap-add-free-heap-debugging-to-all-log-lines
When `DEBUG_HEAP` is defined, add free heap bytes to every log line in `RedirectablePrint::log_to_serial`
* Feature: Seamless Cross-Preset Communication via UDP Multicast Bridging (#7753)
* Added compatibility between nodes on different Presets through `Mesh via UDP`
* Optimize multicast handling and channel mapping
- FloodingRouter: remove redundant UDP-encrypted rebroadcast suppression.
- Router: guard multicast fallback with HAS_UDP_MULTICAST and map fallback-decoded packets
to the local default channel via isDefaultChannel()
- UdpMulticastHandler: set transport_mechanism only after successful decode
* trunk fmt
* Move setting transport mechanism.
---------
Co-authored-by: GUVWAF <thijs@havinga.eu>
* Auto-favorite remote admin node
* Merge pull request #7873 from compumike/compumike/client-base-role
Add `CLIENT_BASE` role: `ROUTER` for favorites, `CLIENT` otherwise (for attic/roof nodes!)
* Fixes
* BaseUI Updates (#7787)
* Account for low resolution wide screen OLEDs
* Allow picking of Device Role and new Display Formatter for Device Role
* Add remainder of client roles to display formatter
* Don't update the role unless you pick a value
* Mascots are fun
* Fix warnings during compile time
* Improve some menus
* Mascots need to work everywhere
* Update Chirpy image
* Fix Trunk
* Update protobufs
* Add date to Clock screen
* Analog clocks love dates too
* Finalize date moves for analog clock
* Added Last Coordinate counter to Position screen (#7865)
Adding a counter to show the last time a GPS coordinate was detected to ensure the user is aware how long since the coordinate updated or to identify any errors.
* Fix
* Portduino config refactor (#7796)
* Start portduino_config refactor
* refactor GPIOs to new portduino_config
* More portduino_config work
* More conversion to portduino_config
* Finish portduino_config transition
* trunk
* yaml output work
* Simplify the GPIO config
* Trunk
* updated shebang to use a more standard path for bash (#7922)
Signed-off-by: Trenton VanderWert <trenton.vanderwert@gmail.com>
* Show GPS Date properly in drawCommonHeader (#7887)
* Commit good code that is sustainable
* Fix new build errors
* BaseUI Updates (#7787)
* Account for low resolution wide screen OLEDs
* Allow picking of Device Role and new Display Formatter for Device Role
* Add remainder of client roles to display formatter
* Don't update the role unless you pick a value
* Mascots are fun
* Fix warnings during compile time
* Improve some menus
* Mascots need to work everywhere
* Update Chirpy image
* Fix Trunk
* Update protobufs
* Add date to Clock screen
* Analog clocks love dates too
* Finalize date moves for analog clock
* Add formatting and menu picking for other GPS format options (#7974)
* Add back options for other GPS format options
* Rename variables and don't overlap elements
* Fix default value
* Should probably add a menu while I'm here!
* Shorten names just a bit to fit on screens
* Fix off by one
* Labels try to make things better
* Missed a label
* Update protobufs (#8038)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Add formatting and menu picking for other GPS format options (#7974)
* Add back options for other GPS format options
* Rename variables and don't overlap elements
* Fix default value
* Should probably add a menu while I'm here!
* Shorten names just a bit to fit on screens
* Fix off by one
* Labels try to make things better
* Missed a label
* Add a new GPS model CM121. (#7852)
* Add a new GPS model CM121.
* Add CM121 to Unicore.
* Trunk fixes, remove unneded NMEA lines
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* (resubmission) Manual GitHub actions to allow building one target or arch (#7997)
* Reset the modified files
* Fix some changes
* Fix some changes
* Trunk. That is all.
---------
Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>
* PPA: Enable Ubuntu 25.10 (questing) (#7940)
* Update Protobuf usage, add MLS, fix clock (#8041)
* Update protobufs (#8045)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Fix icon
* C6l fixes (#8047)
* fix build with HAS_TELEMETRY 0 (#8051)
* Make sure to ACK ACKs/replies if next-hop routing is used (#8052)
* Make sure to ACK ACKs/replies if next-hop routing is used
To stop their retransmissions; hop limit of 0 is enough
* Update src/mesh/ReliableRouter.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* move HTTP contentTypes to Flash - saves 768 Bytes of RAM (#8055)
* Use `lora.use_preset` config to get name (#8057)
* Update RadioLib to v7.3.0 (#8065)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Fix Rotary Encoder Button (#8001)
this fixes the Rotary Encoder Button, currenlty its not working at all.
Currently the action `ROTARY_ACTION_PRESSED` is only triggerd with a IRQ on RISING, which results in nothing since the function detects the "not longer" pressed button --> no action.
the `ROTARY_ACTION_PRESSED` implementation needs to be called on both edges (on press and release of the button)
changing the interupt setting to `CHANGE` fixes the problem.
* Add another seeed_xiao_nrf52840_kit build environment for I2C pinout (#8036)
* Update platformio.ini
* Remove some more extraneous lines
* Add heltec_v4 board. (#7845)
* add heltec_v4 board.
* Update variants/esp32s3/heltec_v4/platformio.ini
Co-authored-by: Austin <vidplace7@gmail.com>
* Limit the maximum output power.
* Trunk fixes
Fixes formatting to match meshtastic trunk linter.
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Upgrade trunk (#8078)
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
* portduino bump to fix gpiod bug (#8083)
An earlier portduino causes problems with initializing gpiod lines. This pulls in the fix.
* Handle ext. notification module things even if not enabled (#8089)
* tlora-pager wake on button, and kb backlight toggling (#8090)
* Try-fix: Unstick that PhoneAPI state (#8091)
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Also pull a deviceID from esp32c6 devices (#8092)
* Remove line from BLE pin screen, to make pin readible on tiny screens
* Fix build errors (#8067)
* Heltec V4 is 16mb
* Clear lasttoradio on BLE disconnect (#8095)
* On disconnect, clear the lastToRadio buffer
* Move it, bucko!
* Revert "Fix build errors (#8067)"
This reverts commit d998f70b56.
* Automated version bumps (#8100)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Upgrade trunk (#8094)
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
* Update Adafruit BusIO to v1.17.4 (#8098)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Add three expansion screens for heltec mesh solar. (#7995)
* Add three expansion screens for heltec mesh solar.
* delete whitespace
Update variants/nrf52840/heltec_mesh_solar/variant.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* delete whitespace
Update variants/nrf52840/heltec_mesh_solar/platformio.ini
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Trunk
---------
Signed-off-by: Trenton VanderWert <trenton.vanderwert@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Dane Evans <dane@goneepic.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <Xaositek@users.noreply.github.com>
Co-authored-by: Markus <Links2004@users.noreply.github.com>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
Co-authored-by: Markus <974709+Links2004@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: WillyJL <me@willyjl.dev>
Co-authored-by: Tom <116762865+NomDeTom@users.noreply.github.com>
Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Michael <michael.overhorst@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Trent V. <trenton.vanderwert@gmail.com>
Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
* nrf52: add watchdog
Main thread only for now.
* bump framework-arduinoadafruitnrf52 to pick up new wdt support
* clang-format the new parts of main-nrf52.cpp
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
(cherry picked from commit 83954293d8)
