* Null-check packet allocations in allocForSending and its callers
Sibling of 0ae44d701.
* Null-check allocDataProtobuf, allocAckNak and allocErrorResponse callers
Second tier of the same nullable contract.
* Keep telemetry sleep scheduling on allocation failure
Allocation failure now marks the telemetry invalid instead of returning
early, so power-saving SENSOR nodes still arm deep sleep.
Removed:
- MessageStore::addFromPacket and addFromString, superseded by
tryAddFromPacket
- GeoCoord rangeRadiansToMeters, distanceTo, bearingTo
- Router::rawSend, declared virtual with no override and no caller
- ContentHandler handleHotspot, handleFs, handleAdminSettings,
handleAdminSettingsApply, handleDeleteFsContent and their commented
route registrations, plus the now unreachable htmlDeleteDir and the
handleUpdateFs declaration that had no definition
- ContentHelper replaceAll
- OnScreenKeyboardModule popup chain: showPopup, clearPopup, drawPopup,
drawPopupOverlay and their state, unreachable since the frame based UI
was replaced by baseUI
- DebugRenderer drawDebugInfoTrampoline, drawDebugInfoSettingsTrampoline
and the orphaned drawFrameSettings
- NodeListRenderer calculateMaxScroll, drawColumns and a stale extern
haveGlyphs declaration with no definition
- UIRenderer::haveGlyphs, Screen::blink,
NotificationRenderer::showKeyboardMessagePopupWithTitle,
VirtualKeyboard::getInputText
- InkHUD touchNavLeft, touchNavRight, Applet::getActiveNodeCount,
ThreadedMessageApplet::saveMessagesToFlash
- TwoButton::setHandlerUp, TwoButtonExtended setHandlerUp,
setJoystickDownHandlers, setJoystickUpHandlers
- CannedMessageModule LaunchRepeatDestination, isCharInputAllowed,
hasMessages
- TrafficManagementModule resetStats, recordRouterHopPreserved,
saturatingIncrement
- UnitConversions::MetersPerSecondToMilesPerHour
- EncryptedStorage getSessionRemainingSeconds
- BMI270Sensor::writeRegisters, GPS::hasFlow, FSCommon copyFile,
SerialConsole consolePrintf, buzz playLongPressLeadUp,
memGet displayPercentHeapFree
* stm32wl: add hardware RTC support infrastructure
Wires the STM32WL chip's internal RTC (running off the LSE 32.768kHz
crystal) into meshtastic's existing time-of-day framework
(perhapsSetRTC()/readFromRTC()), following the same pattern already
used for I2C RTC chips (RV3028, PCF8563/85063, RX8130CE).
LSE is started and polled manually before ever calling into the
STM32RTC library, with our own bounded timeout - the library's own
internal LSE startup path has no bounded fallback and hangs forever
via Error_Handler() if the crystal never locks, so this is required
for a board with a missing/faulty crystal to boot normally rather
than hang.
Gated behind a new HAS_LSE variant flag (currently unset everywhere,
so this is inert until a variant opts in - see follow-up commit).
Signed-off-by: Andrew Yong <me@ndoo.sg>
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
* gps: qualify RTC.h includes to avoid case-insensitive filesystem collision with STM32RTC
The stm32duino STM32RTC library (added to lib_deps in a follow-up
commit) ships its own src/rtc.h. On case-insensitive filesystems
(the macOS default), an unqualified #include "RTC.h"/<RTC.h> from
any file outside src/gps/ resolves to the library's rtc.h instead of
src/gps/RTC.h, since PlatformIO's LDF puts lib_deps include paths
ahead of the project's own -Isrc/gps.
Qualify every include as gps/RTC.h so it can't collide with any
same-named header a future dependency might ship, regardless of
filesystem case sensitivity. Purely mechanical, no behavior change.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
* stm32wl(rak3172): enable hardware RTC support
Opts rak3172 into the HAS_LSE infrastructure added previously: sets
STM32WL_LSE_DRIVE to a conservative default and pulls in the
STM32RTC library. rak3172 has ~63KB flash headroom going in;
build-verified at 76.7% flash usage after this change (up from a
73.8% baseline), well within budget.
wio-e5 is not opted in here despite sharing the same STM32WLE5 chip
- it's already at 96.8% flash usage today (GPS + I2C sensor support
compiled in, unlike rak3172), leaving too little headroom to safely
add STM32RTC without first trimming something else.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
* stm32wl: add docstrings for LSE/RTC setup functions
Addresses CodeRabbit's docstring coverage check on PR #10961.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
* stm32wl: address CodeRabbit nitpicks on PR #10961
- Brace the single-statement HAS_LSE branch in perhapsSetRTC() to
match the sibling readFromRTC() branch's style.
- Quote the RTC.h include in PhoneAPI.cpp for consistency with every
other qualified include site.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* fix(modules): null-check packetPool/clientNotificationPool/mqttClientProxyMessagePool allocations
Follow-up to fix/meshpacket-alloc-null-checks (PR meshtastic/firmware#10948),
which fixed the core routing path (Router/NextHopRouter/ReliableRouter/
MeshService/RadioLibInterface) after reproducing a HardFault on STM32WL
hardware under real mesh traffic. This covers the same allocCopy()/
allocZeroed() unchecked-return pattern in lower-frequency paths that were
out of scope for that PR: SimRadio.cpp (portduino sim RX/TX), NodeInfoModule,
the Telemetry modules' power-saving-sleep notifications, MQTT (map report,
client-proxy messages, config-validation notifications), PositionModule,
SerialModule, and KeyVerificationModule.
Sites where the allocation result was already read back through an
existing null check downstream (e.g. Telemetry's lastMeasurementPacket,
SimRadio's receivingPacket, AdminModule::sendWarning) were left as-is -
verified safe, not touched.
Router::allocForSending() (and everything that funnels through it, e.g.
allocDataProtobuf()) remains unguarded and out of scope here too - it's
called from 30+ sites across the codebase and needs its own audit.
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
Signed-off-by: Andrew Yong <me@ndoo.sg>
* fix(KeyVerificationModule): bound cn->message writes with snprintf
CodeRabbit flagged unbounded sprintf() writes into the fixed-size
ClientNotification.message buffer as a static-analysis nitpick while
reviewing this PR's allocation null-checks. Align these four sites with
the snprintf(dest, sizeof(dest), ...) pattern already used for the same
field elsewhere in this PR (SerialModule.cpp, MQTT.cpp).
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
Signed-off-by: Andrew Yong <me@ndoo.sg>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix SENSOR power saving deep sleep behavior
Deep sleep could be entered while a telemetry packet was still queued
or on air, truncating the transmission. canSleep() gained a deepSleep
parameter and now vetoes in that case; light sleep is unchanged.
Telemetry modules defer a pending deep sleep (bounded to 30s) until the
radio is idle and no longer let the sensor polling interval override
the 5s pre-sleep grace period. A failed sensor read still arms deep
sleep instead of leaving the node awake for a full telemetry interval.
Fixes#10890Fixes#10932
* Deduplicate telemetry deep sleep deferral logic
Move the radio-busy deferral and its counter into BaseTelemetryModule
and add an isPowerSavingSensor() helper. Removes the telemetry-specific
counter from OSThread. The sleep arming block stays per module because
it needs protected OSThread members not visible to the base class.
Every other .cpp/.h pair in src/ (350 of 351) uses identical
capitalization between the two files. Power.cpp/power.h was the sole
outlier; this aligns it with the rest of the codebase. No functional
change — all includes already resolved this file the same way on
case-sensitive filesystems.
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
ScanI2CTwoWire is compiled out on builds that define
MESHTASTIC_EXCLUDE_I2C (e.g. native-wasm/portduino), while the
AirQuality module still builds there. Skip the re-scan when I2C is
excluded; there is nothing to scan.
Audit and fuzzing of the RF-packet decode -> dispatch -> display/phone paths for
the "crash a node or phone with a crafted packet" surface, beyond the XEdDSA
authenticity work.
Crash fixes (reproduced under AddressSanitizer / UBSan):
- GeoCoord::latLongToUTM/latLongToMGRS read fixed letter tables out of bounds on
extreme latitude_i/longitude_i from a received Position, and narrowed
out-of-range easting/northing doubles to unsigned (float-cast-overflow UB).
Clamp the UTM zone, the easting/northing narrowing, and the band/col/row
indices. Regression: test_geocoord_extreme_coords_no_oob.
- EnvironmentTelemetry/AirQualityTelemetry render attacker floats via
String(float), which on nRF52/RP2040/STM32/portduino formats into a fixed
char[33] (dtostrf) and overflows near FLT_MAX. Clamp the rendered metrics via
UnitConversions::displaySafeFloat (finite + magnitude <= 1e9), unit-tested in
test_type_conversions.
Defense-in-depth + robustness:
- TraceRouteModule::printRoute: fix an snr_back[-1] OOB read (wrong count in the
guard) and stop formatting the INT8_MIN "unknown SNR" sentinel as a dB value.
- WaypointModule/NodeDB: sanitize untrusted strings before the OLED renderer and
the phone-facing ClientNotification (belt-and-suspenders vs PB_VALIDATE_UTF8).
- MeshService::sendToPhone: withhold NODEINFO/WAYPOINT packets whose nested string
won't cleanly decode, protecting strict phone protobuf decoders without
affecting mesh relay.
Tests: new test_fuzz_decode (protobuf decode + UTF-8 sanitizer fuzz) and
test_fuzz_packets (perhapsDecode / module-handler / traceroute / phone-gate fuzz),
all under AddressSanitizer; native-suite-count 25 -> 27. Full suite 515/515 green.
* Add define for screen I2C frequency
* Add functions to get I2C screen frequency and port
* Make reclock function aware of screen-set I2C speeds
* Refurbish ReClockI2C API
* Make ReClockI2C API class
* Use new API in AirQualityTelemetry module
* Minor changes on some logs
* Update esp8266-oled library
* Fix esp8266 library
* Minor logging changes
* Improve setClock and restoreClock cases
* Make getter functions const, fix capitalisaiton of new functions
* Minor typo, remove pragma once
* Low prio debug fixes
* Mark getter functions as const (properly)
* Fix LOG based on coderabbit feedback
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Seeed Tracker X1 Support
* silence CPPCheck
* fix macro order regression and adapt stm32hal for new radiolib
* STM32 is a radiolib upstream fix ( https://github.com/jgromes/RadioLib/issues/1825 )
* fix STM32 regression
* Seeed Tracker X1 Support
* silence CPPCheck
* fix macro order regression and adapt stm32hal for new radiolib
* STM32 is a radiolib upstream fix ( https://github.com/jgromes/RadioLib/issues/1825 )
* fix STM32 regression
* address copilot OCD
* Split behavior only when the two LEDs are on distinct pins.
* bring naming in line with the other seeed devices
* update env name to fit convention too
* guarantee evaluation order
* Guard sensor readings against null values, make sensor use less power
* add noise floor
* Sliding window noise floor
* Add getCurrentRSSI() to SimRadio for noise floor support
* Remove sendLocalStatsToPhone call from runOnce
* Change noise floor to int32_t type
* Use int32_t for RSSI sample storage in noise floor
* Remove float cast from noise floor assignment
* Fix Copilot review issues: fix noise floor logic, types, and null pointer
- Use robust busyTx/busyRx checks instead of simple isReceiving check
- Initialize noiseFloorSamples to NOISE_FLOOR_MIN instead of 0
- Move noise_floor assignment inside null check to prevent potential crash
- Change getNoiseFloor() and getAverageNoiseFloor() to return int32_t
- Fix RSSI validation to check for positive values (rssi > 0)
- Fix format specifier from %.1f to %d for int32_t
- Update comments to accurately reflect the sampling logic
* Fix RSSI condition to include zero value
* Change noise floor initialization to zero
* Disable noise floor for LR11x0 chips: getRSSI(bool) unsupported
* Remove updateNoiseFloor call from onNotify to avoid radio queue overflow
Per PR review feedback, calling updateNoiseFloor() in onNotify() for every
ISR event (ISR_TX, ISR_RX, TRANSMIT_DELAY_COMPLETED) can cause the LoRa
radio queue to get full. The noise floor sampling still happens in
startReceive() and after transmitting.
* fix lr11x0 current rssi
* Address noise floor review comments
* Address Copilot SimRadio noise floor comments
* Fix RadioLibInterface formatting
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* fix(telemetry): stop emitting -0.001V sentinel when battery unavailable (#7958)
* address review: use int32_t for batteryMv to avoid uint16_t signed wrap
* Enable Lite and Narrow regions and introduce getEffectiveDutyCycle for Lite profiles
* Add TrafficType enum and extend getConfiguredOrDefaultMsScaled to manage based on regionProfile settings
* Refactor telemetry modules to include TrafficType in getConfiguredOrDefaultMsScaled calls
* Update submodule protobufs to latest commit
* Add support for new region presets and modem presets in menu options
* Add new LoRa region codes and modem presets for EU bands
* boof
* Add modem presets for LITE and NARROW configurations
* Update subproject commit reference in protobufs
* Update protobufs
* Refactor modem preset definitions to use macro for consistency and clarity
* Refactor modem preset cases to use PRESET macro for consistency
* fix: update LoRa region code for EU 868 narrowband configuration
Co-authored-by: Copilot <copilot@github.com>
* Fix test suite failure
Co-authored-by: Copilot <copilot@github.com>
* Add override slot override - for when one override isn't enough.
Co-authored-by: Copilot <copilot@github.com>
* address copilot comments
---------
Co-authored-by: Copilot <copilot@github.com>
* dependency swap - INA3221Sensor
update INA3221 initialization and measurement methods for compatibility with Rob Tillaart's library
Co-authored-by: Copilot <copilot@github.com>
* Addresses copilot review
Co-authored-by: Copilot <copilot@github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Refine comments on USB detection and INA3221
Updated comments regarding USB detection and INA3221 usage.
* Fix static_assert conditions for INA3221 channel definitions
Co-authored-by: Copilot <copilot@github.com>
* moved macro defines earlier to allow better use.
Co-authored-by: Copilot <copilot@github.com>
* Add raw register read methods for bus voltage and shunt current in INA3221Sensor
Co-authored-by: Copilot <copilot@github.com>
---------
Co-authored-by: Copilot <copilot@github.com>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Consolidate SHTs into one class
* Remove separate SHT imports
* Create one single SHTXX sensor type
* Let the SHTXXSensor class handle variant detection
* Minor logging improvements
* Add functions to set accuracy on SHT3X and SHT4X
* Fix variable init in constructor
* Add bus to SHT sensor init
* Update src/modules/Telemetry/Sensor/SHTXXSensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/Telemetry/Sensor/SHTXXSensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix accuracy conditions on SHTXX
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Merge upstream
* Add SHT2X detection on 0x40
* Read second part of SHT2X serial number
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
P0.04 is a digital power-enable pin for the NTC/LUX sensors, not an ADC
input. The old code was calling analogRead() on a floating GPIO that
happened to read ~mid-rail, coincidentally producing reasonable
temperature values.
- Rename T1000X_VCC_PIN to T1000X_SENSOR_EN_PIN and drive it HIGH in
initVariant() for both T1000-E and T1000-S variants
- Read BATTERY_PIN (with ADC_MULTIPLIER) instead, clamped to the 3.0V
LDO output (NTC_REF_VCC) for the NTC resistance calculation
ROUTER_LATE should be treated as an impolite telemetry role like
ROUTER, responding to multi-hop broadcast requests and using
aggressive send timing without channel utilization checks.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add transmit history for throttling that persists between reboots
* Fix RAK long press detection to prevent phantom shutdowns from floating pins
* Update test/test_transmit_history/test_main.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Test fixes and placeholder for content handler tests
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Align telemetry broadcast want_response behavior with traceroute
* Fixes
* Reduce side-effects by making the telemetry modules handle the ignorerequest
* Remove unnecessary ignoreRequest flag
* Try inheriting from MeshModule
* Add exclusion for sensor/router roles and add base telem module
* Don't ever define PIN_LED or BLE_LED_INVERTED (#9494)
* Don't ever define PIN_LED
* Deprecate BLE_LED_INVERTED
* Add StatusMessage module and config overrides (#9351)
* Add StatusMessage module and config overrides
* Trunk
* Don't reboot node simply for a StatusMessage config update
* Missed in reviews - fixing send bubble (#9505)
* Prefer EXT_PWR_DETECT pin over chargingVolt to detect power unplugged (#9511)
* Make sure we always return a value in NodeDB::restorePreferences() (#9516)
In case FScom is not defined there is no return statement. This
moves the return outside of the ifdef to make sure a defined
value is returned.
* Inkhud battery icon improvements. (#9513)
* Inkhud battery icon improvements.
Fixes the battery icon draining from the flat side towards the bump, which is backwards from general design language seen on most devices
By request of kr0n05_ on discord, adds the ability to mirror the battery icon which fixes that issue in another way, and is also a common design seen on other devices.
* Remove option for icon mirroring
* Add border + dither to battery to prevent font overlap
* Fix trunk format
* Code cleanup, courtesy of Xaositek.
* Add reply bot module with DM-only responses and rate limiting (#9456)
* Implement Meshtastic reply bot module with ping and status features
Adds a reply bot module that listens for /ping, /hello, and /test commands received via direct messages or broadcasts on the primary channel. The module always replies via direct message to the sender only, reporting hop count, RSSI, and SNR. Per-sender cooldowns are enforced to reduce network spam, and the module can be excluded at build time via a compile flag. Updates include the new module source files and required build configuration changes.
* Update ReplyBotModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/ReplyBotModule.h
Match the existing MESHTASTIC_EXCLUDE_* guard pattern so the module is excluded by default.
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/ReplyBotModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Tidying up
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* HotFix for ReplyBot - Modules.cpp included and moved configuration.h (#9532)
* Undefine LED_BUILTIN (#9531)
Keep variant in sync with
https://github.com/meshtastic/firmware/commit/df40085
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add agc reset attempt (#8163)
* Add agc reset attempt
* Add radioLibInterface include
* Trunk
* AGC reset don't crash, don't naively call
* Update src/main.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Use Throttle function
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Remove unused hmx variable (#9529)
The variable is not used at all in the function, remove it to
silence the compiler warning.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Rename LED_PIN to LED_POWER, move handling out of main to dedicated module (#9512)
* Rename LED_PIN to LED_POWER, move handling out of main to dedicated module
* Misc
* Remove errant endif
* Fix hop_limit upgrade detection (#9550)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* meshtasticd: Fix install on Fedora 43 (#9556)
* RPM: Include meshtasticd-start.sh (#9561)
* Add Slash Key to VirtualKeyboard (#9563)
Addition of ? and / to the virtual Keyboard via short and long press
* Add support for CW2015 LiPo battery fuel gauge (#9564)
* Add support for CW2015 LiPo battery fuel gauge
* Address Copilot's concerns, minor fixups
* Make LED_POWER blip even in critical battery (#9545)
* Enable FORTIFY and SP for native builds (#9537)
* Enable FORITFY and NX for native builds
meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack.
This gives the following improvements on Debian Trixie:
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd
Tested with --sim mode I do not get any crashes or similar.
* Enable FORTIFY and NX for native builds
meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack.
This gives the following improvements on Debian Trixie:
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd
Tested with --sim mode I do not get any crashes or similar.
* Enable FORTIFY and SP for native builds
meshtasticd does have a stack canaries and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and stack canaries.
This gives the following improvements on Debian Trixie:
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd
$ checksec --file=./.pio/build/native/meshtasticd
RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE
Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd
Tested with --sim mode I do not get any crashes or similar.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update built-in documentation for current method of implementation (#9592)
* Refactor logging in ProtobufModule to ensure message details are logged after successful decoding (#9536)
* Automated version bumps (#9604)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Add missing openocd_target to custom nrf52 boards (#9603)
This stops platformio complaining about `Missing target configuration for me25ls01-4y10td` etc when trying to flash with nrfutil.
* Add sdl libs for native builds (#9595)
* Add sdl libs for native builds
* Alpine try again
* fix some random compiler warnings (#9596)
* Modify the dependency library of v4-tft (#9507)
* BaseUI: Favorite Screen Signal Quality improvement (#9566)
* Favorite Signal Quality improvement
* Show Voltage if node shares it.
* Trunk Fix
* Change Favorite tittle to encase name with Asterisks
* Add Pluggin In condition for Battery Line
* Adjust getUptimeStr Prefixes
* Create isAPIConnected for SharedCommon usage
* Correct leftSideSpacing to account for isAPIConnected
---------
Co-authored-by: Jason P <applewiz@mac.com>
* ExternalNotification and StatusLED now call AmbientLighting to update… (#9554)
* ExternalNotification and StatusLED now call AmbientLighting to update RGB LEDs. Add optional heartbeat
* Don't overwrite RGB state if heartbeat is disabled.
* Use the right define
* Remove another .h and make rgb static
* move rgb objects into AmbientLighting class
* Straighten out AmbientLighting Thread object
* Use %f for floats
* Fixes on SCD4X admin comands (#9607)
* Fixes on SCD4X admin comands
* Minor fix in logs for SEN5X
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* feat/add sfa30 (#9372)
* Move PMSA003I to separate class and update AQ telemetry
* AirQualityTelemetry module not depend on PM sensor presence
* Remove commented line
* Fixes on PMS class
* Add missing warmup period to wakeUp function
* Fixes on compilation for different variants
* Add functions to check for I2C bus speed and set it
* Initial implementation for SFA30Sensor
* Move PMSA003I to separate class and update AQ telemetry
* AirQualityTelemetry module not depend on PM sensor presence
* Remove commented line
* Fixes on PMS class
* Add missing warmup period to wakeUp function
* Fixes on compilation for different variants
* Add functions to check for I2C bus speed and set it
* Add ScreenFonts.h
Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>
* PMSA003I 1st round test
* Fix I2C scan speed
* Fix minor issues and bring back I2C SPEED def
* Remove PMSA003I library as its no longer needed
* Add functional SCD4X
* Fix screen frame for CO2
* Add admin commands to SCD4X class
* Add further admin commands and fixes.
* Remove unused I2C speed functions and cleanup
* Cleanup of SEN5X specific code added from switching branches
* Remove SCAN_I2C_CLOCK_SPEED block as its not needed
* Remove associated functions for setting I2C speed
* Unify build epoch to add flag in platformio-custom.py (#7917)
* Unify build_epoch replacement logic in platformio-custom
* Missed one
* Fix build error in rak_wismesh_tap_v2 (#7905)
In the logs was:
"No screen resolution defined in build_flags. Please define DISPLAY_SIZE."
set according to similar devices.
* Put guards in place around debug heap operations (#7955)
* Put guards in place around debug heap operations
* Add macros to clean up code
* Add pointer as well
* Cleanup
* Fix memory leak in NextHopRouter: always free packet copy when removing from pending
* Formatting
* Only queue 2 client notification
* Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak
Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap
* Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak
Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap
* Update protobufs (#7973)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* T-Lora Pager: Support LR1121 and SX1280 models (#7956)
* T-Lora Pager: Support LR1121 and SX1280 models
* Remove ifdefs
* Trunk
* Trunk
* Static memory pool allocation (#7966)
* Static memory pool
* Initializer
* T-Lora Pager: Support LR1121 and SX1280 models (#7956)
* T-Lora Pager: Support LR1121 and SX1280 models
* Remove ifdefs
---------
Co-authored-by: WillyJL <me@willyjl.dev>
* Portduino dynamic alloc
* Missed
* Drop the limit
* Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Fix json report crashes on esp32 (#7978)
* Tweak maximums
* Fix DRAM overflow on old esp32 targets
* Guard bad time warning logs using GPS_DEBUG (#7897)
In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy.
In combination, these result in a spamming of the logs when a bad time is found
When the GPS is active, we're calling the GPS thread every 0.2secs.
So this log could be printed 4,500 times in a no-lock scenario :)
Reserve this experience for developers using GPS_DEBUG.
Fixes https://github.com/meshtastic/firmware/issues/7896
* Scale probe buffer size based on current baud rate (#7975)
* Scale probe buffer size based on current baud rate
* Throttle bad time validation logging and fix time comparison logic
* Remove comment
* Missed the other instances
* Copy pasta
* Fix GPS gm_mktime memory leak (#7981)
* Fix overflow of time value (#7984)
* Fix overflow of time value
* Revert "Fix overflow of time value"
This reverts commit 0847969201.
* That got boogered up
* Remove PMSA003 include from modules
* Add flag to exclude air quality module
* Rework PMSA003I to align with new I2C scanner
* Reworks AQ telemetry to match new dynamic allocation method
* Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements
* Reworks PMSA003I
* Move add sensor template to separate file
* Split telemetry on screen options
* Add variable I2C clock compile flag
* Added to Seeed Xiao S3 as demo
* Fix drawFrame in AQ module
* Module settings override to i2cScan module function
* Move to CAN_RECLOCK_I2C per architecture
* Add reclock function in TelemetrySensor.cpp
* Add flag in ESP32 common
* Minor fix
* Move I2C reclock function to src/detect
* Fix uninitMemberVar errors and compile issue
* Make sleep, wakeUp functions generic
* Fix STM32 builds
* Add exclude AQ sensor to builds that have environmental sensor excludes
* Add includes to AddI2CSensorTemplate.h
* SEN5X first pass
* WIP Sen5X functions
* Further (non-working) progress in SEN5X
* WIP Sen5X functions
* Changes on SEN5X library - removing pm_env as well
* Small cleanup of SEN5X sensors
* Minor change for SEN5X detection
* Remove dup code
* Enable PM sensor before sending telemetry.
This enables the PM sensor for a predefined period to allow for warmup.
Once telemetry is sent, the sensor shuts down again.
* Small cleanups in SEN5X sensor
* Add dynamic measurement interval for SEN5X
* Only disable SEN5X if enough time after reading.
* Idle for SEN5X on communication error
* Cleanup of logs and remove unnecessary delays
* Small TODO
* Settle on uint16_t for SEN5X PM data
* Make AQTelemetry sensors non-exclusive
* Implementation of cleaning in FS prefs and cleanup
* Remove unnecessary LOGS
* Add cleaning date storage in FS
* Report non-cumulative PN
* Bring back detection code for SEN5X after branch rebase
* Add placeholder for admin message
* Add VOC measurements and persistence (WIP)
* Adds VOC measurements and state
* Still not working on VOC Index persistence
* Should it stay in continuous mode?
* Add one-shot mode config flag to SEN5X
* Add nan checks on sensor data from SEN5X
* Working implementation on VOCState
* Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h)
* Adds conditions for stability and sensor state
* Fixes on VOC state and mode swtiching
* Adds a new RHT/Gas only mode, with 3600s stabilization time
* Fixes the VOCState buffer mismatch
* Fixes SEN50/54/55 model mistake
* Adapt SEN5X to new sensor list structure. Improve reclock.
* Improve reClockI2C conditions for different variants
* Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery
* Add SEN5X
* Fix merge errors
* Small reordering in PMS class for consistency
* If one sensor fails, AQ telemetry still reports data
* Small formatting fix
* Add SEN5X to AQI in ScanI2C
* SCD4X now part of AQ module with template list
* Fixes difference between idle and sleep
* In LowPower, sleep is disabled
* Requires testing for I2C clock comms for commands
* Remove unnecessary import
* Add co2 to serialized AQ metrics
* Add SFA30 with new sensor template in AQ module
* Update library dependencies in platformio.ini
* Fix unitialized variables in SEN5X constructor
* Fix missing import
* Fix uninitMemberVars
* Fix import error for SCD4X
* Fix I2CClock logic
* Fix not reclocking back to 700000Hz
* Fix multiple sensors being read simultaneously
* The logic in AQ module is different to the one in EnvironmentTelemetryModule. In Env module, if any sensor fails to getMetrics, no valid flag for the module. This prevents other sensors to report data.
* Fix pending clock change in PMSA003
* Cleanup of SEN5X class
* Exclude AQ sensor from wio-e5 due to flash limitations
* Fix I2C clock change logic
* Make sure clock is always set to needed value
* Fix returns
* Fix trunk
* Fix on condition in reclock
* Fix trunk
* Final SFA30 class implementation
* Add HCHO to screen and improve logs
* Add metrics to mesh packet serializer
* Minor fixes in logs
* OCD tidy up of logs
* Fix sleep function
* Remove old I2C_CLOCK_SPEED code
---------
Co-authored-by: nikl <nikl174@mailbox.org>
Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>
Co-authored-by: Nashui-Yan <yannashui10@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: WillyJL <me@willyjl.dev>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Log rxBad PacketHeaders with more info (id, relay_node) like printPacket, so we can try to match RX errors to other packets in the logs. (#9614)
* Exclude status message module
* fix: zero entire public key array instead of only first byte (#9619)
* Update protobufs (#9621)
* Xiao NRF - define suitable i2c pins for the sub-variants (#8866)
Co-authored-by: Christian Walther <cwalther@gmx.ch>
* Update src/detect/ScanI2C.cpp
Co-authored-by: Wessel <wessel@weebl.me>
* Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp
Co-authored-by: Wessel <wessel@weebl.me>
* Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp
Co-authored-by: Wessel <wessel@weebl.me>
* Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp
Co-authored-by: Wessel <wessel@weebl.me>
* Update src/mesh/NodeDB.cpp
Co-authored-by: Wessel <wessel@weebl.me>
* convert GPS global and some new in gps.cpp to unique_ptr (#9628)
Trying this to see if anything bad happen if I were to replace most raw pointers with unique_ptr.
I didn't used std::make_unique since it is only supported in C++14 and onwards but until we update esp32 to arduino 3.x the ESP32 xtensa chips use a C++11 std.
* replace delete in RedirectablePrint.cpp with std::unique_ptr (#9642)
Is part of the unique_ptr modernization effort.
* replace delete in EInkDynamicDisplay.{cpp,h} with std::unique_ptr (#9643)
Is part of the unique_ptr modernization effort.
* Undefine LED_BUILTIN for Heltec v2 variant (#9647)
* Undefine LED_BUILTIN for Heltec v2 variant
* Undefine LED_BUILTIN for Heltec v2.1 variant
---------
Co-authored-by: Jorropo <jorropo.pgm@gmail.com>
* replace delete in RadioInterface.cpp with std::unique_ptr (#9645)
Is part of the unique_ptr modernization effort.
* fix typo in PIN_GPS_SWITCH (#9648)
Wasn't caught by CI.
* replace delete in CryptoEngine.{cpp,h} with std::unique_ptr (#9649)
Is part of the unique_ptr modernization effort.
* workaround NCP5623 and LP5562 I2C builds (#9652)
Theses two appear to be buggy on r1-neo and nomadstar meteor pro, they rely on Wire.h being included previously to their import.
Idk why other platforms using the same smart LEDs are working while theses ones don't.
This should make CI green on the dev branch.
* replace delete in AudioThread.h with std::unique_ptr (#9651)
Is part of the unique_ptr modernization effort.
* Add USB_MODE=1 for Station G2 (#9660)
* InkHUD: Favorite Map Applet (#9654)
* fix a lot of low level cppcheck warnings (#9623)
* simplify the observer pattern, since all the called functions are const getters.
* use arduino macro over std: for numerical values and refactor local variables in drawScrollbar()
* oh, so Cppcheck actually complained about const pointers not being const.
* slowly getting out of ifdef hell
* fix inkHUD warnings as well
* last 2 check warnings
* git checks should fail on low defects from now on
* Feat/add scd30 (#9609)
* Merge develop into SCD30
* Add SCD30 class
* Fix logging and admin commands
* Minor cleanup and logging improvements
* Minor formatting issue
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Improvements on setTemperature
* Fix casting float-uint16_t
* Pass 100 for resetting temperature offset
* Fix issues pointed out by copilot
* Add quick reboot to set interval quicker on scd30
* Change saveState to only happen after boot and minor log changes
* Fix missing semicolon in one shot mode log
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* fix: respect DontMqttMeBro flag regardless of channel PSK (#9626)
The previous PSK check was broken from its introduction in #4643 —
memcmp was used in boolean context without comparing to 0, inverting
the condition. Since no one noticed for over a year, the PSK-based
filtering provided no practical value. Simplifying to always respect
the sender's preference is both more correct and easier to reason about.
* our firmware action is too clever
Update pio_target and add pio_opts for checks.
* fix detection of SCD30 by checking if the size of the return from a 2 byte register read is correct (#9664)
* fix detection of SCD30 by checking if thee size of the return from a 2 byte register read is correct
fix signedness warning in PMSA003 sensor code.
* Add alternate path for LPS22HB
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* check EndTransmission for errors and compare returned length to expected value
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* #9623 resolved a local shadow of next_key by converting it to int. (#9665)
* zip a few gitrefs down (#9672)
* InkHUD: Allow non-system applets to subscribe to input events (#9514)
* Allow inkhud user applets to consume inputs with opt-in system
Adds a way for applets to subscribe to input events while keeping it off
by default to preserve compatibility and expected behaviours. Adds
example for use as well.
* Add check for nullptr on getActiveApplet uses
* Remove redundant includes
* Move subscribedInputs to protected
* More consistent naming scheme
* Fake IAQ values on Non-BSEC2 platforms like Platformio and the original ESP32 (#9663)
* BSEC2 Replacement
- add approximation for IAQ to non-BSEC2 platforms.
- Re-add this sensor to ESP32 targets, and refactor env_extra includes.
- Fix C++ 11 compatibility
* Check for gas resistance 0
* ULED_BUILTIN for 9m2ibr_aprs_lora_tracker (#9685)
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de>
Co-authored-by: Vortetty <33466216+Vortetty@users.noreply.github.com>
Co-authored-by: Mattatat25 <108779801+mattatat25@users.noreply.github.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Max <rekin.m@gmail.com>
Co-authored-by: Colby Dillion <colby.dillion@pacshealth.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom <116762865+NomDeTom@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Chloe Bethel <chloe@9net.org>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: oscgonfer <oscgonfer@users.noreply.github.com>
Co-authored-by: nikl <nikl174@mailbox.org>
Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>
Co-authored-by: Nashui-Yan <yannashui10@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu>
Co-authored-by: WillyJL <me@willyjl.dev>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Wessel <wessel@weebl.me>
Co-authored-by: Christian Walther <cwalther@gmx.ch>
Co-authored-by: Jorropo <jorropo.pgm@gmail.com>
Co-authored-by: Eric Barch <ericb@ericbarch.com>
Co-authored-by: Clive Blackledge <clive@ansible.org>
* BSEC2 Replacement
- add approximation for IAQ to non-BSEC2 platforms.
- Re-add this sensor to ESP32 targets, and refactor env_extra includes.
- Fix C++ 11 compatibility
* Check for gas resistance 0
* Merge develop into SCD30
* Add SCD30 class
* Fix logging and admin commands
* Minor cleanup and logging improvements
* Minor formatting issue
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Improvements on setTemperature
* Fix casting float-uint16_t
* Pass 100 for resetting temperature offset
* Fix issues pointed out by copilot
* Add quick reboot to set interval quicker on scd30
* Change saveState to only happen after boot and minor log changes
* Fix missing semicolon in one shot mode log
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* simplify the observer pattern, since all the called functions are const getters.
* use arduino macro over std: for numerical values and refactor local variables in drawScrollbar()
* oh, so Cppcheck actually complained about const pointers not being const.
* slowly getting out of ifdef hell
* fix inkHUD warnings as well
* last 2 check warnings
* git checks should fail on low defects from now on
* Move PMSA003I to separate class and update AQ telemetry
* AirQualityTelemetry module not depend on PM sensor presence
* Remove commented line
* Fixes on PMS class
* Add missing warmup period to wakeUp function
* Fixes on compilation for different variants
* Add functions to check for I2C bus speed and set it
* Initial implementation for SFA30Sensor
* Move PMSA003I to separate class and update AQ telemetry
* AirQualityTelemetry module not depend on PM sensor presence
* Remove commented line
* Fixes on PMS class
* Add missing warmup period to wakeUp function
* Fixes on compilation for different variants
* Add functions to check for I2C bus speed and set it
* Add ScreenFonts.h
Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>
* PMSA003I 1st round test
* Fix I2C scan speed
* Fix minor issues and bring back I2C SPEED def
* Remove PMSA003I library as its no longer needed
* Add functional SCD4X
* Fix screen frame for CO2
* Add admin commands to SCD4X class
* Add further admin commands and fixes.
* Remove unused I2C speed functions and cleanup
* Cleanup of SEN5X specific code added from switching branches
* Remove SCAN_I2C_CLOCK_SPEED block as its not needed
* Remove associated functions for setting I2C speed
* Unify build epoch to add flag in platformio-custom.py (#7917)
* Unify build_epoch replacement logic in platformio-custom
* Missed one
* Fix build error in rak_wismesh_tap_v2 (#7905)
In the logs was:
"No screen resolution defined in build_flags. Please define DISPLAY_SIZE."
set according to similar devices.
* Put guards in place around debug heap operations (#7955)
* Put guards in place around debug heap operations
* Add macros to clean up code
* Add pointer as well
* Cleanup
* Fix memory leak in NextHopRouter: always free packet copy when removing from pending
* Formatting
* Only queue 2 client notification
* Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak
Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap
* Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak
Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap
* Update protobufs (#7973)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* T-Lora Pager: Support LR1121 and SX1280 models (#7956)
* T-Lora Pager: Support LR1121 and SX1280 models
* Remove ifdefs
* Trunk
* Trunk
* Static memory pool allocation (#7966)
* Static memory pool
* Initializer
* T-Lora Pager: Support LR1121 and SX1280 models (#7956)
* T-Lora Pager: Support LR1121 and SX1280 models
* Remove ifdefs
---------
Co-authored-by: WillyJL <me@willyjl.dev>
* Portduino dynamic alloc
* Missed
* Drop the limit
* Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Fix json report crashes on esp32 (#7978)
* Tweak maximums
* Fix DRAM overflow on old esp32 targets
* Guard bad time warning logs using GPS_DEBUG (#7897)
In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy.
In combination, these result in a spamming of the logs when a bad time is found
When the GPS is active, we're calling the GPS thread every 0.2secs.
So this log could be printed 4,500 times in a no-lock scenario :)
Reserve this experience for developers using GPS_DEBUG.
Fixes https://github.com/meshtastic/firmware/issues/7896
* Scale probe buffer size based on current baud rate (#7975)
* Scale probe buffer size based on current baud rate
* Throttle bad time validation logging and fix time comparison logic
* Remove comment
* Missed the other instances
* Copy pasta
* Fix GPS gm_mktime memory leak (#7981)
* Fix overflow of time value (#7984)
* Fix overflow of time value
* Revert "Fix overflow of time value"
This reverts commit 0847969201.
* That got boogered up
* Remove PMSA003 include from modules
* Add flag to exclude air quality module
* Rework PMSA003I to align with new I2C scanner
* Reworks AQ telemetry to match new dynamic allocation method
* Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements
* Reworks PMSA003I
* Move add sensor template to separate file
* Split telemetry on screen options
* Add variable I2C clock compile flag
* Added to Seeed Xiao S3 as demo
* Fix drawFrame in AQ module
* Module settings override to i2cScan module function
* Move to CAN_RECLOCK_I2C per architecture
* Add reclock function in TelemetrySensor.cpp
* Add flag in ESP32 common
* Minor fix
* Move I2C reclock function to src/detect
* Fix uninitMemberVar errors and compile issue
* Make sleep, wakeUp functions generic
* Fix STM32 builds
* Add exclude AQ sensor to builds that have environmental sensor excludes
* Add includes to AddI2CSensorTemplate.h
* SEN5X first pass
* WIP Sen5X functions
* Further (non-working) progress in SEN5X
* WIP Sen5X functions
* Changes on SEN5X library - removing pm_env as well
* Small cleanup of SEN5X sensors
* Minor change for SEN5X detection
* Remove dup code
* Enable PM sensor before sending telemetry.
This enables the PM sensor for a predefined period to allow for warmup.
Once telemetry is sent, the sensor shuts down again.
* Small cleanups in SEN5X sensor
* Add dynamic measurement interval for SEN5X
* Only disable SEN5X if enough time after reading.
* Idle for SEN5X on communication error
* Cleanup of logs and remove unnecessary delays
* Small TODO
* Settle on uint16_t for SEN5X PM data
* Make AQTelemetry sensors non-exclusive
* Implementation of cleaning in FS prefs and cleanup
* Remove unnecessary LOGS
* Add cleaning date storage in FS
* Report non-cumulative PN
* Bring back detection code for SEN5X after branch rebase
* Add placeholder for admin message
* Add VOC measurements and persistence (WIP)
* Adds VOC measurements and state
* Still not working on VOC Index persistence
* Should it stay in continuous mode?
* Add one-shot mode config flag to SEN5X
* Add nan checks on sensor data from SEN5X
* Working implementation on VOCState
* Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h)
* Adds conditions for stability and sensor state
* Fixes on VOC state and mode swtiching
* Adds a new RHT/Gas only mode, with 3600s stabilization time
* Fixes the VOCState buffer mismatch
* Fixes SEN50/54/55 model mistake
* Adapt SEN5X to new sensor list structure. Improve reclock.
* Improve reClockI2C conditions for different variants
* Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery
* Add SEN5X
* Fix merge errors
* Small reordering in PMS class for consistency
* If one sensor fails, AQ telemetry still reports data
* Small formatting fix
* Add SEN5X to AQI in ScanI2C
* SCD4X now part of AQ module with template list
* Fixes difference between idle and sleep
* In LowPower, sleep is disabled
* Requires testing for I2C clock comms for commands
* Remove unnecessary import
* Add co2 to serialized AQ metrics
* Add SFA30 with new sensor template in AQ module
* Update library dependencies in platformio.ini
* Fix unitialized variables in SEN5X constructor
* Fix missing import
* Fix uninitMemberVars
* Fix import error for SCD4X
* Fix I2CClock logic
* Fix not reclocking back to 700000Hz
* Fix multiple sensors being read simultaneously
* The logic in AQ module is different to the one in EnvironmentTelemetryModule. In Env module, if any sensor fails to getMetrics, no valid flag for the module. This prevents other sensors to report data.
* Fix pending clock change in PMSA003
* Cleanup of SEN5X class
* Exclude AQ sensor from wio-e5 due to flash limitations
* Fix I2C clock change logic
* Make sure clock is always set to needed value
* Fix returns
* Fix trunk
* Fix on condition in reclock
* Fix trunk
* Final SFA30 class implementation
* Add HCHO to screen and improve logs
* Add metrics to mesh packet serializer
* Minor fixes in logs
* OCD tidy up of logs
* Fix sleep function
* Remove old I2C_CLOCK_SPEED code
---------
Co-authored-by: nikl <nikl174@mailbox.org>
Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>
Co-authored-by: Nashui-Yan <yannashui10@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: WillyJL <me@willyjl.dev>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Thomas Göttgens