mirror of
https://github.com/meshtastic/firmware.git
synced 2026-09-17 00:52:45 -04:00
ee48094ea8309858cd579100b8aaf14560bcc4b2
757
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
0b906b4d15 |
T-Watch Ultra support (#8171)
* feat: T-Watch Ultra support * fix init touch controller * add framebuffer * update to device-ui * trunk fmt * update amoled driver reference * PMU cosmetics * power off lora * fix NodeDB defaults * trySetRTC when fixedPosition * haptic touch (only BaseUI) * init lora RF switch * update LovyanGFX 1.2.19 * earlyInitVariant() adaptations acc. #9438 * update device-ui / touch handling * Set NFC_CS disabled on boot * Get t-watch-ultra working better on BaseUI * Fix compilation * Fix flash reads on t-watch-ultra * Get baseui drawing to the screen correctly again on t-watch and add touch IRQ handling * Add PMU IRQ handling * Add IMU support * Change define to avoid collision * BaseUI changes to support t-watch-s3 rounded screen (#10786) * BaseUI changes to support t-watch-s3 rounded screen * Extend margin work to CannedMessages * Finish merge * Get audio working on watch-ultra * trunk fmt * added custom_meshtastic boilerplate * T-Echo-Plus: disable BHI260AP while assumingly not implemented * Drop the duplicate origBold declaration from the merge * Inset incoming message bubbles on rounded screens * Fix RTTTL tempo, WiFi screen margins, PMU guard and a duplicate define * fix compile errror (the 2nd time) * fix SDcard * fix/workaround CO5300 pixel flush to SPI * trunk fmt --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> |
||
|
|
c308d0aca4 |
feat: Support Elecrow ThinkNode M9 (#10908)
* thinknode-m9 variant * move lora to SPI1 device * enable SDcard * use HSPI * BaseUI tft -> HSPI * buzzer, webdav lib * fix build issues * M9 default to MUI, no BT, short ringtone * add keyboard long-press config * update variant * add ThingNode-M9 GPS string * GPS 115200 baud * Basic BaseUI support * Fixup power detection * Compass and KB fixes for M9 * add timed Lock::lock() * add SD card * point device-ui to thinknode m9 draft branch * trunk fmt * fix FusionCompass * Fix t-deck-tft linker arg list overflow in CI * SDcard/lora fix: SPI1 must not be declared twice in arduino 3.x -> reuse SPI1 defined in FSCommon.cpp * update battery parameters * reinit SD card when updating; fix PSRAM size * update lib versions * fix wakeup on key press (KB_INT) * fix default nag_timeout for TFT/MUI devices with buzzer * increase PSRAM and SD freq * trunk fmt * update lovyanGFX 1.2.26 * update device-ui commit reference * fix screen definition * remove DONE; maybe a keyword or other used identifier * fixed CI error nag_timeout * fix prepareSleep initialization * trunk fmt * reduce SD SPI frequency * update device-ui * fix SDcard issue * stage * fix device-ui commit reference * fix device-ui commit * update device-ui commit (fixed keyboard lag) * fix QMI8658 * trunk fmt * update .ini meta information, align SD freq * fix device-ui reference to target (ready to merge) * device-ui for all other targets * make the rabbit happy * trunk fmt * fixed lock screen * fix compile error * SPI lock timeout * apply device-ui fix * revert bad RadioLib commit hash in platformio.ini Co-authored-by: mverch67 <71137295+mverch67@users.noreply.github.com> * fix wrong commit hash change * fix fix commit fix * I love changing random numbers in random files --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> |
||
|
Ben Meadors
|
0ff10318ad |
refactor(net): unique_ptr for connection-lifecycle objects (#11459)
- WiFiServerAPI/ethServerAPI apiPort and ethApiServer's listener are create/destroy cycles that repeat across WiFi teardown and W5500 chip resets; the manual delete+null bookkeeping becomes reset(). (ethTlsApiServer's listener is left for a follow-up: that file is already touched by the partial-init fix PR and converting it here would conflict.) - ContentHandler::handleFormUpload held its body parser raw with delete on four separate exit paths of a per-request handler; any future early return was a silent leak. unique_ptr removes all four. - The portduino ch341Hal global becomes unique_ptr. The LoRa-error recovery loop's delete/null/new sequence was correct only by hand-preserved ordering; it becomes reset()/make_unique. RadioLibHAL keeps a non-owning raw pointer, as before. No behavior change. |
||
|
Andrew YongandJonathan Bennett
|
b4c2eb0b78 |
refactor(led): generalize LED_LORA init from ThinkNode-M7 (#11437)
Migrate LED_LORA init to match existing LED init patterns. Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> |
||
|
|
fdb644e0b7 |
Fix millis() rollover in deadline, interval, and timestamp handling (#11291)
* Add native test coverage for the UptimeClock monotonic seam
src/UptimeClock.{h,cpp} shipped without a dedicated test suite. Port the six
tests from the monotonic-time branch (test/test_time), retargeted to the
renamed header.
The wrap test crosses 0xFFFFFFFF via advanceTestMillis() rather than a second
setTestMillis(): setTestMillis() sets clockSourceChanged, which makes
getMillis64() rebase its accumulator and swallow the wrap.
* NextHopRouter: fix 49.7-day millis() rollover in retransmission timing
Resolves the "FIXME, handle 51 day rolloever here!!!" in
NextHopRouter::doRetransmissions() by switching the retransmission-due
comparison from plain unsigned <= to a signed-difference cast.
The previous p.nextTxMsec <= now comparison silently breaks across the
~49.7 day millis() wraparound: pending retransmissions either stall
for the remainder of the wrap window, or all fire simultaneously at
the rollover boundary. Long-running router/infrastructure nodes do hit
this in practice.
The replacement (int32_t)(p.nextTxMsec - now) <= 0 is the standard
Arduino/embedded idiom for rollover-safe deadline checks and behaves
identically to the original for any non-wrap timing.
* Address Copilot review: use unsigned half-range for rollover-safe retransmit check
Review feedback from @Copilot on PR #10227: casting a uint32_t
subtraction to int32_t is implementation-defined in C++ when the
unsigned value exceeds INT32_MAX (even though it works on typical
two's-complement targets).
Switch to the fully well-defined unsigned half-range form:
nextTxMsec is in the past-or-equal iff (now - nextTxMsec) has not
wrapped past 2^31 ms. Future offsets < 2^31 ms wrap into the top
half and read as 'not yet'.
Same semantics as the signed-cast version on every two's-complement
platform we care about, but portable to any conforming C++ impl.
* Use monotonic time for airtime windows
* Document monotonic airtime windows
* Fix test_packet_signing sentinel that #10227's rollover fix inverts
test_C3_invalid_repeated_packet_cannot_ack_or_change_retry_state parked a
pending packet at nextTxMsec = UINT32_MAX to mean "never retransmit", then
asserted that a rejected repeated packet leaves the retry state untouched.
NextHopRouter::doRetransmissions() now tests whether a retransmit is due with
an unsigned half-range compare, (uint32_t)(now - nextTxMsec) < 0x80000000u,
so that retransmission timing survives the ~49.7 day millis() wrap. Under it
now - 0xFFFFFFFF == now + 1, a small positive delta, so UINT32_MAX reads as
~1ms in the past: the retransmit fires and rewrites nextTxMsec, and the test
failed with "Expected 4294967295 Was 6247".
Use a representable future time instead. Production is unaffected either way -
nextTxMsec is only ever written as millis() + d, and UINT32_MAX came from the
test harness alone - so the sentinel is what needs to go, not the comparison.
Special-casing UINT32_MAX in the retransmit path would keep a value that reads
as "expired" under any wrap-correct compare.
The value is held in a local because millis() advances across
runPipelineIngress(), so recomputing it at the assertion would compare against
a different number.
Reported upstream on meshtastic/firmware#10227, whose branch predates this test.
* Make Throttle time-injectable and add hasElapsed()
Throttle backs ~94 call sites, which makes it the highest-leverage place in
the tree to put the clock seam: reading Time::getMillis() instead of millis()
in its three call sites turns all of them into time-injectable code at once,
without touching any of them. The 32-bit millis() wrap is not otherwise
reachable from a native test.
The read is behaviour-preserving - Time::getMillis() returns millis() unless a
test injects a clock - and the full native suite passes with it live.
Also add hasElapsed(), the complement of isWithinTimespanMs(), because 51 of
the 94 call sites are spelled !isWithinTimespanMs and read poorly. Its
boundary is inclusive (>=) since isWithinTimespanMs uses <; both are
documented. It deliberately does not treat lastExecutionMs == 0 as "never
run": call sites pair that test with the interval check themselves, and
absorbing a sentinel into the one helper every module depends on is exactly
the value-overloading hazard being removed elsewhere.
Migrating the existing !isWithinTimespanMs sites is cosmetic and deliberately
left out of this commit.
test/test_throttle/ covers window semantics, both boundaries, the complement
identity, execute()'s first-run and throttled paths, and - the point of the
exercise - a window opened before the wrap closing correctly after it,
including at the 24h interval that is the longest in the tree.
* Stop disarmed deadline sentinels reaching the comparison
Two deadline variables encoded "inactive" as a magic value that only reads as
"never" because the comparison against it is a naive millis() compare. Under
any rollover-correct comparison both invert to "expired ~49 days ago", so they
have to be untangled before those comparisons can be fixed.
Power::reboot() set rebootAtMsec = -1 on platforms with no reboot
implementation, intending "never fire". Every reader already treats 0 as the
disarm value - powerCommandsCheck() tests `if (rebootAtMsec && ...)`, and
AdminModule writes 0 to cancel - so -1 was both wrong and unnecessary. Use 0.
Left as UINT32_MAX it would reboot-loop the moment the comparison is corrected.
ExternalNotificationModule's nag window compared against nagCycleCutoff, which
holds UINT32_MAX once stopped and 1 at boot. isNagging is the real armed flag,
so test it first and short-circuit: a disarmed cutoff can no longer reach the
arithmetic, while an idle module still takes the same sleep path that the
boot-time value of 1 was relying on.
Note this fixes the sentinel only. The comparison itself is still a naive
`nagCycleCutoff < millis()` and remains on the list to convert.
* Fix millis() rollover in every deadline and interval comparison
Roughly 20 sites compared against millis() directly - `millis() > deadline`,
`deadline < millis()`, `last + interval < millis()`. All of them break for
about 24 days after the 32-bit millis() wrap: depending on which side of the
wrap each value sits, the action either stalls for weeks or fires immediately
and repeatedly. The longest affected interval is the 12 hour NTP renewal, a
~50x margin against the wrap, so none of these needed the range - only the
correct comparison.
Add Throttle::deadlinePassed(deadlineMs) for sites that store an absolute
deadline they cannot re-express as "interval since an event". It uses the same
unsigned half-range test as NextHopRouter::doRetransmissions() rather than
introducing a competing signed-cast idiom, and unlike the signed cast it is
defined for every input. Sites that do store an event use the existing
isWithinTimespanMs / hasElapsed. Nothing gained new state.
Because both helpers read Time::getMillis(), every converted site is now
reachable from a native test that drives the clock across the wrap; the
comparison itself is covered directly in test/test_throttle/.
Sentinel handling is the reason this could not be a mechanical rewrite. The
disarm convention is not uniform: 0 means "inactive" for rebootAtMsec,
shutdownAtMsec, alertBannerUntil, fixHoldEnds, suppressUntilMs and
touchResumeBlockUntilMs; 0 means "due now" for ntp_renew, which is forced to 0
at link-up; UINT32_MAX means "inactive" for nagCycleCutoff; and
alertBannerUntil == 0 in isOverlayBannerShowing() means "show indefinitely".
Every inactive marker is arithmetically far in the past, so a correct
comparison fires on it - each site tests its sentinel before the arithmetic,
and keeps the meaning it had.
Two sites carried a second bug found on the way:
BME680Sensor tested (stateUpdateCounter * STATE_SAVE_PERIOD) < millis(). With
a 6 hour period and a uint16_t counter that product overflows uint32_t after
about 198 saves, independently of the millis() wrap. It now measures the
interval since the last save.
EInkDynamicDisplay had `if (previousRunMs > millis()) return;` as a millis()
overflow guard, which skipped rate limiting entirely for the whole post-wrap
period - the bug it meant to prevent. Every check below it already goes
through Throttle, so the guard is removed rather than fixed.
MotionSensor's calibration countdown is converted to a signed delta rather
than deadlinePassed, because it needs the remaining magnitude and not a
boolean; that matches the already-correct check in the same file.
* Remove getMillis64() and use Throttle for the NodeInfo reply window
getMillis64() had exactly one caller and no callers in tests. It also carried
obligations that made it the wrong shape for this firmware: a wrap accumulator
in mutable statics, which is not ISR-safe, and which must be polled at least
once every ~49.7 days or it silently misses a wrap and returns a time ~49 days
short.
Its one caller only wanted to know whether a 12 hour suppression window had
elapsed - which Throttle answers correctly across the wrap without any
accumulator. NodeInfoModule now stores Time::getMillis() in lastNodeInfoSeen
and tests the window with Throttle::isWithinTimespanMs, so the map holds
milliseconds rather than seconds derived from a 64-bit read.
USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS is user-overridable and now feeds a
multiply by 1000, so a static_assert rejects any value too large to express in
milliseconds instead of letting it wrap.
clockSourceChanged goes too. It existed solely to rebase getMillis64()'s
accumulator when a test swapped clock sources, and it made the wrap untestable
through the injection API: setTestMillis() set the flag, so a wrap crossed by
two setTestMillis() calls was swallowed. With the accumulator gone the flag has
nothing to rebase, and the injection API is a plain settable clock.
The three getMillis64 tests are dropped as they no longer describe anything.
One test replaces them, pinning that advanceTestMillis() wraps past
0xFFFFFFFF rather than saturating, since the Throttle wrap tests rely on it.
Also fix eviction in pruneLastNodeInfoCache(): it picked the entry with the
smallest stored stamp, which is the wrong victim once some stamps sit on the
far side of the wrap. It now evicts the largest elapsed time.
* Add CI guard and docs rule against naive millis() comparisons
Fixing the existing sites does not stop the next one being added. The
millis-deadline-check job rejects millis() placed directly next to a comparison
operator, in either order, anywhere in src/. It lives in test_native.yml
alongside suite-count-check, which sets the precedent for a repo-hygiene guard
that CI enforces and bin/run-tests.sh does not.
The correct idioms all subtract before comparing, so none of them match the
pattern. Line comments are stripped first, so documentation is free to name the
broken form - as the guard's own comment and the coding conventions both do.
Writing the check before finishing the sweep turned out to be worth it: it
found roughly 14 sites that a by-hand audit of deadline variables had missed,
including two extra nagCycleCutoff compares, both boot-screen timeouts, and a
6 hour sensor save interval that was also overflowing a uint32_t multiply.
.github/millis-deadline-allowlist.txt covers the cases that are genuinely not
deadline tests. Both current entries are uptime thresholds - "has the device
been up N ms" - with no stored deadline and no event to measure from: a 30s
button holdoff against phantom shutdown from floating pins, and a 10s window
for the OEM boot logo. Each re-crosses its threshold once per wrap, which is
harmless for boot-holdoff logic and not worth new state to avoid. Entries are
keyed on file plus exact source text, without line numbers, so an edit above an
entry does not silently invalidate it.
Locally the guard reports 19 matches before the sweep and 2 after, both
allowlisted.
The Throttle bullet in the coding conventions is rewritten from "prefer
Throttle for rate limiting" to "never compare against millis() directly", lists
all four helpers with when to use which, names the CI guard, and documents the
sentinel hazard with the rebootAtMsec = -1 case that would have become a reboot
loop. Mirrored into AGENTS.md; CLAUDE.md gets a pointer row.
* Trim rollover comments to what the code needs
The comments added with the millis() rollover fixes carried too much of the
investigation that produced them: how many sites were found, which document
recorded them, what the old code used to do. That belongs in the commit history,
not in the source, and some of it was already stale - Power::reboot() still
described the check it disarms as "a naive millis() > deadline" when that
comparison had been fixed in the same series.
What stays is the non-obvious part at each site: which sentinel value the
variable overloads and what it means there, since that differs between call
sites and is what a correct comparison gets wrong. 0 means "not scheduled" for
rebootAtMsec, "renew now" for ntp_renew, and "show indefinitely" in
isOverlayBannerShowing().
Exposition is kept where it earns its place: the Throttle helpers, the uptime
clock's note on why there is no 64-bit variant, and the tests. The Throttle
docs lose only the site count and the "longest interval in the firmware"
statistic, both of which would age badly; the range trade-off between the two
forms is what a caller actually needs.
Comments only - no code changed, verified by diff.
* possible fixes
* Address review feedback on the rollover fixes
- BME680Sensor: checkpoint lastStateSaveMs after a successful write instead of
at the interval test. The first save (IAQ accuracy >= 2) left it at 0, timing
the next save from boot, and stamping before the write deferred the retry a
full period when the write failed. Reads Time::getMillis(), the same clock
Throttle compares against.
- Throttle: add deadlinePassedAt(now, deadline) for loops that snapshot the
clock once and test many deadlines; deadlinePassed() now delegates to it.
NextHopRouter::doRetransmissions() uses it, replacing the inline half-range
compare adopted from #10227 (nightjoker7) - same arithmetic, credited at the
call site - and takes its snapshot from Time::getMillis() so setNextTx()
deadlines and the due test cannot diverge under an injected test clock.
- test_native.yml: set -euo pipefail in the millis-deadline guard, matching the
sibling suite-count job. Without -e a partially failed scan could report "no
violations" from truncated output.
- test_packet_signing: build the not-due deadline from Time::getMillis() rather
than millis(), so the test and the router read one clock.
- test_throttle: cover deadlinePassedAt(), and correct a wrapped-value comment
(0xFFFFFF00 + 400 is 0x00000090, not 0x00000094).
Two review comments were declined: the AirTime mutex (every airTime-> caller
runs in the single cooperative loop, WebServerThread included) and the
MotionSensor 0-sentinel countdown (the calibration frame is only installed
while a window is open).
clod helped out here
* Correct the described failure window of a naive millis() compare
The comments and agent docs said a bare `millis() > deadline` "breaks for ~24
days after the wrap". That figure belongs to the fix, not the bug: it is the
half-range limit of deadlinePassed(), which reads deadlines more than 2^31 ms
ahead as already passed, and the range over which a UINT32_MAX sentinel reads
as passed.
The naive compare's actual failure is an inversion lasting only while the
deadline sits on the far side of the wrap, so it is bounded by the interval:
the action fires immediately and loses its wait, or blocks for about the wait
it should have performed - days for the nRF52 flash-corruption backoff,
one skipped cycle for a seconds-long retransmit timer.
Comments and docs only; the ~24.8 day statements that correctly describe
deadlinePassed()'s own range are left as they were.
clod helped out here
* Restore a monotonic uptime clock and consolidate the wrap counters
Time::getMillisMonotonic() is the getMillis64() shape - a 32-bit wrap
counter carried across reads - promoted to the shared timebase, with
Time::getUptimeSecs() as the derived whole-seconds view. This deliberately
reverses the earlier removal of getMillis64(), and the distinction matters:
removal was right for a lazily-read accumulator with one rare caller, where
a 49.7-day gap between reads silently swallowed a wrap. Here every read is
the poll and AirTime::runOnce() guarantees one per second; the missed-wrap
contract is pinned by a test rather than left as a footnote.
Three private wrap counters collapse into it:
- AirTime::syncNow() takes its seconds from Time::getUptimeSecs() and drops
its lastSyncMsec checkpoint; window rotation is unchanged.
- DeviceTelemetryModule loses refreshUptime()/uptimeWrapCount/uptimeLastMs;
uptime_seconds comes from Time::getUptimeSecs(), which also removes the
0.296s-per-wrap truncation of (0xFFFFFFFF / 1000) * wraps. Its two
interval checks move to Throttle::hasElapsed().
- HostMetricsModule's copies of those members were never read (its uptime
comes from /proc/uptime) - deleted.
Not ISR-safe (unguarded mutable carry): ISRs keep using getMillis(), which
stays a pure read. Audited: no interrupt-context file reads getTime(),
getValidTime(), or the new accessors.
test/native-suite-count 44 -> 45: the bump for test_uptime_clock was lost
in a branch history rewrite, leaving every later value off by one -
run-tests.sh reports AMBER and CI's suite-count-check fails on the current
push until this correction.
* Anchor the wall clock in monotonic milliseconds
getTime() computed elapsed-since-time-set as a 32-bit millis() delta, so a
node that took time once and stayed up past 49.7 days reported a wall clock
one full cycle in the past - and last_heard, rx_time, message and position
stamps all inherited it. The anchor is now the 64-bit monotonic count
(timeStartMsec -> timeStartMs64) and the elapsed term is computed in 64-bit,
so the wall clock is exact at any uptime.
All six anchor writers follow: the five hardware-RTC read branches and
perhapsSetRTC(), which keeps a truncated 32-bit copy of the same instant for
its Throttle-checked rate-limit stamps. The test seams anchor the same way.
Two native regression tests drive getTime() across the wrap through the
Time seam - one anchored before the wrap and read after it, one anchored
after a counted wrap - with the test epoch derived from BUILD_EPOCH so the
plausibility window cannot rot as the build date advances.
* Stamp the rx_time placeholder in monotonic uptime seconds
computeRxTimeStamp() stamped Time::getMillis() when the clock was untrusted,
and reconcilePendingRxTimes() back-calculated with a 32-bit millis() delta -
correct within one wrap, but a placeholder older than 49.7 days aliased to a
small elapsed value and reconciled to a plausible-but-wrong recent epoch:
the exact failure has_rx_time exists to prevent, reachable by an ordinary
unattended router whose phone connects two months in.
The placeholder is now Time::getUptimeSecs(). Both stamps come off the
monotonic counter, so the elapsed term is exact at any age and the aliasing
window is gone outright rather than widened. If elapsed somehow exceeds the
epoch itself, the packet stays un-dated (absent, never wrong) instead of
clamping to a pre-1970 value. Defence in depth: a placeholder that leaks
needs ~50 years of uptime to cross MIN_PLAUSIBLE_EPOCH, where milliseconds
took 18.3 days.
The stream-API reconciliation tests keep their scenarios with the placeholder
unit switched, and ScopedTimeFixture resets the monotonic carry so uptime
seconds are deterministic per case.
* Date nodes heard before the clock arrives, without polluting last_heard
A node first heard while the wall clock was untrusted got no last_heard at
all, and nothing backfilled it once time arrived - the phone showed "Last
heard: unknown" for a node it had just announced. The arrival instant now
waits in a RAM-only sidecar (NodeNum -> uptime seconds, 32 slots,
reuse-oldest - the RouteHealth shape) and is converted to a real epoch on
the clock-becoming-trusted transition, beside the existing rx_time
reconciliation. last_heard itself never holds anything but a real epoch or
0: it persists to flash and the warm tier, where an uptime-relative value
would be meaningless after reboot.
The sidecar's write sites are updateFrom()'s no-trusted-clock path (the
rx_time placeholder already carries the arrival instant, so this is a store,
not a second clock read) and addFromContact's anti-eviction stamps, which
previously wrote a bare getTime() - boot-relative seconds on a clockless
node, the exact value lastHeardIsWallClock() exists to catch. Eviction
ranking honours the stamps: heard-this-boot outranks every stored epoch,
ordered among themselves, so a stamped contact is not the first victim.
PhoneAPI re-reads last_heard at nodeinfo send time: a record prefetched
before the clock became trusted can carry 0 while the store has since been
backfilled, and re-reading at the pop makes handshake ordering (time-set vs
node-list download) irrelevant. Backfill never moves last_heard backwards
and skips the pathological elapsed-exceeds-epoch case. A node evicted to
the warm tier before time arrives is still absorbed with last_heard 0 -
same as before, bounded to the untrusted window.
* Update the agent docs for the monotonic timebase
The conventions bullet asserted there is deliberately no 64-bit millis; the
monotonic uptime clock restored for timestamps changes that contract. State
the split explicitly: Throttle for deadlines and intervals (no carry state),
Time::getMillisMonotonic()/getUptimeSecs() for timestamps, polled by
construction and not ISR-safe.
* Publish the monotonic wrap carry from a single writer
getMillisMonotonic() was a read-modify-write on two unguarded statics, and it
is reached off the main loop: the nRF52 Bluefruit task via
onFromRadioAuthorize() -> PhoneAPI::getFromRadio -> getValidTime(), and the
portduino civetweb workers via the same path. Two readers interleaving inside
the wrap window could each increment the carry, putting every uptime and
wall-clock reading 2^32 ms ahead for the rest of the boot - a permanent ~49.7
day jump in rx_time, last_heard and ClientNotification.time.
Readers no longer write. serviceMonotonic() publishes a snapshot behind a
seqlock and is the only writer; a reader adds its own unsigned elapsed time to
that snapshot, which is exact across the wrap, so it never inspects the
boundary and cannot miscount it. The main loop publishes every iteration, so
the once-per-49.7-days obligation now has the whole window of margin instead of
resting on an instruction-wide race.
AirTime was the guaranteed poller and is now a pure reader, so the two airtime
wrap tests step the clock the way loop() does. The test clock itself is atomic
so a suite can drive it from one thread while others read.
* Re-arm the GPS ephemeris hold when none is in force
The rollover sweep guarded the hold re-arm with `fixHoldEnds != 0 &&`, which
reads like the sentinel rule but inverts this site. The comparison it replaced,
`(fixHoldEnds + GPS_THREAD_INTERVAL) < millis()`, was always true when nothing
was armed - that was the point, since 0 means "not holding" and so is a reason
to arm. With the guard, a publish that cleared the hold without sleeping (the
`shouldPublish && !tooLong && !holdExpired` path, which does not call down())
left hasValidLocation set and prev_fixQual non-zero, so no disjunct held:
nothing re-armed, nothing published, and the receiver stayed powered at the
200ms poll until searchedTooLong() fired.
State the question positively instead. fixHoldInForce() is the only place the
sentinel is interpreted, and both of runOnce()'s decisions derive from it - the
asymmetry is now visible rather than implied, since arming does not require a
prior hold but expiring does. Its `!= 0` test is not redundant with the
arithmetic: deadlinePassed() is an unsigned half-range test, so past 2^31 ms of
uptime the sentinel reads as a deadline ~24.9 days in the future.
Kept beside its caller rather than in a header; the native test build compiles
GPS.cpp, so the suite declares the prototypes.
Also converts the getACK() wait to isWithinTimespanMs(start, interval): it has
both the start instant and the interval in hand, which gives the full 49.7-day
range instead of 24.8 days ahead, and takes its anchor from Time::getMillis()
so the wait is injectable.
* Date the NodeInfo reply window in uptime seconds
The 12h reply-suppression stamp regressed from wrap-immune 64-bit seconds to
raw 32-bit milliseconds, and pruneLastNodeInfoCache() evicts only by node count
and DB membership - never by age. A stable mesh under the node cap therefore
keeps every stamp indefinitely, and once uptime passes 49.7 days an old one
aliases back into the window: `now - stamp` computes as ~0 and a legitimate
NodeInfo request goes unanswered for up to 12h. It self-heals and repeats once
per wrap cycle.
Store Time::getUptimeSecs() instead, which does not wrap for 136 years, and
drop the millisecond conversion the previous shape needed. Entries past the
window are now evicted too: they can only ever decide "don't suppress".
N8-N11 cover the window from both sides, and N10 pins the regression - it needs
a full 2^32 ms of uptime to elapse, not merely a crossing of the boundary,
because that is when a millisecond stamp reads as "answered this instant".
tearDown() now restores the injected clock and C14's region and TX bucket. A
failing assertion aborts the test body, so restoring at the end of it leaked
that state into every later case.
* Update the agent docs for the single-writer clock and sentinel direction
Two rules the preceding three commits changed.
The monotonic clock is no longer maintained by whoever happens to read it:
serviceMonotonic() is the only writer, readers are pure, and calling it from
anywhere but the main loop reintroduces the double-count.
The sentinel guidance gained the half it was missing. It named UINT32_MAX as a
sentinel while prescribing an idiom that only covers 0, and it assumed the
sentinel always means "suppress" - at the GPS fix-hold site it meant "fire",
which is how that regression passed review looking like the rule.
* Name the fix-hold expiry predicate and arm it from the injected clock
holdJustExpired() gives the second reading of the fixHoldEnds sentinel a
name beside the first, so both are pinned by test/test_gps_fix_hold/ and
neither can be respelled at the call site. The old inline form could not
be tested: written as a literal, its guard folds at compile time and the
assertion asserts nothing.
The arm site used bare millis() while the evaluation reads the Throttle
clock; same value in production, but it kept that write out of reach of
Time::setTestMillis(). Remap a deadline that lands on 0, which would
otherwise read as no hold at all.
* Share the extend formula between the clock's reader and writer
getMillisMonotonic() and serviceMonotonic() carried byte-identical wrap
arithmetic. A one-sided edit to either would drift the published carry
from what readers report, so keep one copy.
* Trim the NodeInfo dedup comment to the house limit
* todo note for potential future imrpovments
* fix some simple deadlines
* Trim the hold-expiry test comment to the house limit
* Fix non-blocking uptime publication and pre-clock recency edges (#29)
* fix(time): avoid blocking monotonic readers
* test(time): make paused-publisher check deterministic
* fix(time): address review portability gaps
* Init the eviction sentinel to the newest possible recency
EvictionRecency{} is {0, false}, which evictionRecencyOlder() ranks as older than
every candidate: without the oldestIndex/oldestBoringIndex guards nothing would
ever be selected and a full node DB would stop evicting entirely.
Init to the genuine maximum instead, so the sentinel is correct on its own. The
index guards stay: two independent reasons the scan is right beats one.
* Keep the deadline-guard check name branch protection matches
The guard was widened to cover Time::getMillis() and unqualified getMillis(),
and renamed to suit. Upstream branch protection matches required checks by name,
so a rename means the old name never reports and merges block on a check that
will never arrive.
Widen the guard, keep the name; the descriptive text carries the broader scope.
* Correct native-suite-count to 47 after the develop merge
Upstream #11293 added test_nmea_wpl and took develop's count to 43; this branch
had independently reached 46. Merging develop resolved the counter textually,
keeping 46, while the directory set became the union of both sides at 47.
The suite-count CI gate fails on the mismatch, and it gates the native test jobs,
so the tests themselves were being skipped.
* test(uptime): make the wrap fall where the comment says it does
The concurrent-reader case started at 0xFFFFF000, leaving 0x1000 to the wrap, so
the 0x800 advance annotated "cross the wrap" fell short and the wrap actually
happened during the following 60s advance.
Start at 0xFFFFF800 instead, so the first advance lands exactly on the wrap while
the readers are running and the second is the ordinary time after it - the shape
both comments already described. Total elapsed is unchanged, so the closing
assertion still holds.
* Respond to human comments
* Did I ever tell you about the time I went to Shelbyville? I wore an onion on my belt, which was the style at the time.
* Convert the I2S nag deadline develop dragged in
The HAS_I2S_SPEAKER_NRF52 RTTTL block arrived from develop with a raw
nagCycleCutoff >= millis(), which the deadline guard rejects. Use the same
Throttle::deadlinePassed() form as the two sibling paths in this function.
* Arm the LittleFS format guard with a flag, not a zero timestamp
preFSBegin() runs in the first millisecond of boot, so millis() can legitimately
return 0 there. Both readers of last_format_ms treated 0 as "nothing formatted
this boot", which would skip the repeat-corruption escalation and let a dead
flash reformat-loop instead of reporting FLASH_CORRUPTION_UNRECOVERABLE.
* Note the single-thread contract on AirTime
* Note the AirTime locking TODO, and tighten the thread note
The two constant getters are not constrained, and getSilentMinutes() reads the
buckets without rotating them, so "the accessors mutate" was not accurate.
* trunk: ignore trufflehog false positives on millis-wrap test constants
test_throttle and test_uptime_clock pin dense clusters of hex boundary
constants (0xFFFFFF00u and neighbors) to exercise 32-bit millis()
rollover. trufflehog's Lob detector stitches nearby hex literals into
one candidate string, and the result happens to match a Lob API key
shape - not a secret, just test fixtures.
Same pattern already used for the gitleaks/nodedb-fixture false
positive in this file.
---------
Co-authored-by: nightjoker7 <mattdeering7@gmail.com>
Co-authored-by: Clive Blackledge <clive@ansible.org>
Co-authored-by: Benjamin Faershtein <119711889+RCGV1@users.noreply.github.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
|
||
|
Ben MeadorsandJonathan Bennett
|
87a009da63 |
fix(nrf52): LTO was dropping the board variant's weak hook overrides (#11415)
* fix(nrf52): LTO was dropping the board variant's weak hook overrides Whole-image LTO (enabled arch-wide for nrf52840 in #10655) inlines the empty weak body of earlyInitVariant()/lateInitVariant()/variant_shutdown()/ variant_nrf52LoopHook()/variantDefault*Config() at the call site, because the weak default and the call site live in the SAME translation unit. The strong override in variants/<arch>/<board>/variant.cpp is then never linked, and the board's hardware setup silently does not run. nrf52_lto.py's -fno-lto variant recompile does not help here: the caller is the problem, not the variant object. Needs both ingredients, so this only affects 2.8: the earlyInitVariant() indirection landed in #9438 and is present in v2.7.26 too, but v2.7.26 has no -flto, so the override linked normally. Found on the muzi R1 Neo, whose earlyInitVariant() drives DCDC_EN_HOLD (P0.13, the DC-DC hold after the user button) and NRF_ON (P0.29, "tells IO controller device is on"). Both were dropped from the image, so the companion MCU never saw the nRF application come up and stayed in its DFU indication (purple LED). Verified in the ELF: pre-fix setup() runs straight from waitUntilPowerLevelSafe() to the LED_NOTIFICATION block with no earlyInitVariant symbol in the binary and no pinMode/digitalWrite on P0.13 or P0.29 anywhere; post-fix it calls the real override. HW-confirmed on an R1 Neo. Also affected on nrf52840: earlyInitVariant() on 10 variants (incl. t-echo-card, which sequences its RT9080 3V3 rail there), variant_shutdown() on 18 variants (t114, t-echo, ThinkNode M1-M8, meshlink, wio-tracker-L1 ... - sleep pin parking, so deep-sleep leakage), variant_nrf52LoopHook() on 3 RAK variants. Confirmed dropped on heltec-mesh-node-t114 by build, not just by inspection. Fix is __attribute__((noinline)) on both the weak declaration and definition - the same guard already carried by loopCanSleep(), preFSBegin(), PowerHAL and variant_enableBatteryLpcompWake(), whose comment in main-nrf52.cpp already documents this exact failure mode. Also extend _VARIANT_OVERRIDES in extra_scripts/nrf52_lto.py from just _Z11initVariantv to all eight hooks. That post-link guard already had the right logic and would have caught this on every PR - it simply was not listing Meshtastic's own weak variant hooks, only the core's. With the list extended it goes red on both r1-neo and heltec-mesh-node-t114 when the noinline is reverted, and green with it. Its failure message now names both possible causes. * review: trim the noinline rationale comments to two lines Per AGENTS.md ("keep code comments minimal - one or two lines, max"), the incident detail and extended background belong in the PR description, not the source. Keeps the LTO/noinline rationale and the pointer to the guard. --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> |
||
|
|
cd716fe384 |
logging: audit log strings for terseness, reclaiming ~6.8 KB of string data (#11374)
* logging: strip redundant punctuation, level prefixes, and 'successfully' from log strings The logger already appends a newline and prints the level tag, so trailing '.', '!', '...', literal \n, and 'Error:'/'Warning:' prefixes inside format strings are wasted flash bytes. Same for 'successfully' (the affirmative form already implies it). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * logging: tighten verbose log strings in modules, radio, platform, and system code Rewrite wordy log messages to terser equivalents - drop filler words (articles, 'attempting', 'due to', 'please'), use 'Can't X'/'X failed' phrasing, and abbreviate where the codebase already does (config, init, msg, BT). Format specifiers and argument lists are unchanged; distinctive greppable tokens are preserved. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * logging: tighten verbose log strings in telemetry sensors and GPS Same terseness pass: drop filler, 'Can't X'/'X failed' phrasing, common abbreviations (temp, msg). Specifiers, arguments, and sensor-name prefixes unchanged. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * logging: tighten verbose log strings in mesh core Same terseness pass over NodeDB, Router, MeshService, PhoneAPI, RadioInterface, NextHopRouter, and PacketHistory: 'X failed'/'Can't X' phrasing, imperative verbs, dropped filler. Specifiers and arguments unchanged; duplicate literals kept identical to preserve linker string dedup. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * logging: 'Unable to/Could not/Cannot' -> "Can't" in log strings Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * logging: clang-format rewrap after string shortening Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * logging: restore boot-logo trailing newline and progress-dot strings The terseness pass over-trimmed: the Meshtastic ASCII boot logo kept its blank line via a trailing \n, and three bare "." progress ticks were reduced to empty strings. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1 * Update src/mesh/wifi/WiFiAPClient.cpp Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> * logging: address review feedback on the terseness audit - Node/packet IDs use the repo's 0x%08x convention in NextHopRouter, NodeDB, AdminModule and CannedMessageModule. The sibling log in each if/else pair is converted too, so a pair isn't split across two formats. next_hop stays 0x%x - it's the last-byte relay hint, not a NodeNum. - RTC: the read-path and set-path "not found" warnings were byte-identical, so the linker deduped them and the log couldn't say which one fired. Split into "RTC read:" / "RTC set:". (The four sites live in mutually exclusive #ifdef branches, so the RTC family was never ambiguous.) - SCD4X getAmbientPressure()/setAmbientPressure() logged "altitude", and SCD30 getASC() logged "Can't send command" for a read. Both now name the operation they actually perform. - LOG_ERROR already carries the level: ". Error: %u" -> ", rc=%u" (matching the existing rc=%d house style) and "Error executing X()" -> "X() failed". - Typos and wording: "OTA partiton. (Reason" -> "OTA partition (reason", "CST3530 not response ~" -> "CST3530 no response", "Packet received with to: of 0" -> "to=0", HostMetrics "Error decoding" -> "Can't decode", and the dangling ": " on the NextHopRouter retransmission line. Printf specifier sequences are byte-identical on all 37 touched lines apart from the 6 deliberate %x/%u -> %08x node-ID widenings, all on uint32_t args. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
AustinandClaude Opus 5
|
ad5d877c16 |
Fix cppcheck redundantAssignment for OLED_GEOMETRY_OVERRIDE variants (#11325)
`pio check` reports at src/main.cpp:878: [low:style] Variable 'screen_geometry' is reassigned a value before the old one has been used. [redundantAssignment] for every variant that pins its panel size with OLED_GEOMETRY_OVERRIDE (t-impulse-plus -> GEOMETRY_64_32, t-echo-card -> GEOMETRY_72_40). The diagnostic pairs the override write with the `GEOMETRY_128_128` write in the SH1107 normalization branch: on those boards that write is a dead store, clobbered a few lines later. Skip the geometry writes when the variant pins the panel size. The screen_model normalization still runs (the driver needs it) and precedence is unchanged - the override still wins on those boards, and nothing changes for boards without one. The compile-time USE_SH1107 write is guarded the same way so the defect can't reappear if a future variant combines the two. Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
|
4b4e82bd72 |
SenseCAP Indicator: RP2040 peripherals for the main firmware (#6220)
* indicator: RP2040 peripherals for the main firmware The SenseCAP Indicator RP2040 co-processor serves as a generic peripheral bridge over a serial protobuf link (interdevice.proto): - FakeI2C implements TwoWire and tunnels write and read transactions, so the standard sensor drivers and the I2C scan work unmodified on the bridged second bus (WIRE1) - FakeUART forwards GPS NMEA to the regular GPS driver - SD card access with chunked file transfers, paged directory listings and card statistics; device-ui loads map tiles and map styles from the card behind the RP2040 - link at 2M baud with 4KB chunks, message structs kept off task stacks Log messages carrying their own bracket tag render it like a thread name. Replaces the earlier IndicatorSensor/COBS approach. * indicator: address review Correlate responses with request ids, serialize the shared TX buffer, reject oversized frames, fix RX buffer overflow and NMEA truncation, full-length file paths. * indicator: assign the GPS FakeUART at runtime Static initialization order across translation units is undefined, so createGps() assigns and null-checks the bridged serial instead. Bound the NMEA length defensively. * indicator: bump device-ui pin to 27e6c0c * indicator: ping/pong link probe, non-blocking runOnce, FakeI2C locking The RP2040 sends nothing unsolicited without a GPS module attached, so wait_ready now probes with the new ping message instead of listening passively. runOnce skips its pump while a requester holds link_lock, keeping the main loop from blocking for a full request timeout. FakeI2C serializes transactions between the UI task and the main loop with an owner-tracked lock held from beginTransmission to transaction end. * indicator: link resync, config-honoring GPS, bridged-bus routing, stats validity Frame resync scans to the next magic instead of flushing the RX buffer, and the pump handles all buffered frames per pass. The RX drain reads in bulk and the protobuf encoder gets the correct buffer bound. GPS honors the gps_mode setting on the Indicator instead of always running. RTC, I2C keyboard and motion sensor drivers resolve WIRE1 through ScanI2CTwoWire::fetchI2CBus so bridged buses reach the right transport. FakeUART implements flush/availableForWrite/const-write from the Stream contract and fences its cross-core ring buffer. SdCardInfo.stats_valid is passed through to device-ui, and the remote FS backend gains the remove operation used for cleanup of failed tile saves. * indicator: retry lost link round trips, I2CResult UNSPECIFIED Remote FS operations retry once on a transport timeout. Correlation ids drop late responses of the first attempt; a retried append whose first attempt landed is recognized by the offset conflict carrying the resulting file size. Definitive failures are not retried, missing-tile probes stay a single round trip. Regenerated bindings add the I2CResult.Status UNSPECIFIED zero value so an empty result cannot decode as success. * indicator: nack responses, rename bridge classes to I2CProxy/UARTProxy A request the co-processor cannot decode or handle is nacked, so the requester fails fast instead of burning its timeout. All requests stage the shared tx_message under link_lock. FakeI2C and FakeUART are renamed to I2CProxy and UARTProxy after the pattern they implement, with their instances following suit. Drops dead code (unused NO_NEWS_PAUSE, unreachable not-running branches, doubled include guards) and the GPS pin log line that is meaningless on the tunneled port. * indicator: refuse a co-processor that speaks another protocol version The ping/pong handshake now carries InterdeviceVersion. A pong reporting a version other than ours means the RP2040 runs firmware that does not match this build, so the bridge stays shut down for the session and the mismatch is logged with both versions. Requests fail fast instead of being misinterpreted by the other side. * indicator: regen protos, interdevice protocol version 2 * indicator: per-task I2C contexts, gated handshake, retryable link failures The bridged I2C bus is shared between the main loop and the UI task, and TwoWire has no transaction bracket a lock can span: drivers drain the read buffer with available()/read() long after requestFrom() returned. Each calling task therefore gets its own staging and read buffers instead of a lock that could be left held (or that could not protect the read buffer anyway). The transaction is staged inside the link, under its lock. No request is sent before the co-processor has completed the version handshake, and runOnce keeps probing until it does, so a co-processor that boots slowly or reboots on its watchdog no longer leaves the bridge dead for the session. Requests in flight are counted, not flagged: two threads can be in a request and the first one out must not clear the other's state. File operations are retried on a lost frame and on a co-processor busy with card maintenance, but not on a refusal (nack) or a definitive failure, and they release the SPI lock while they wait so a slow link does not starve the radio. * indicator: fail safe on a peer mismatch, wait out card maintenance FileStatus moved to a fresh tag: reusing the tag of the removed success flag made every failure status decode as success on a peer that predates it. A card being mounted (busy) is retried rather than reported as an empty slot, and a co-processor busy with card maintenance is waited out: mounting takes seconds and the free space scan of a large card walks its whole FAT, which is not a reason to report a missing tile. The bridged I2C bus releases the SPI lock as well, so the keyboard scan on the UI task cannot starve the radio either. Slot claims in the I2C proxy are atomic, NMEA is not sent to a peer we refuse to talk to, and the handshake is completed by the unsolicited ping the co-processor sends when it has booted, which also reports a reboot. * indicator: regen protos, FileStatus back on the original tags * indicator: regen protos, ping/pong carry the InterdeviceVersion enum * indicator: point the protobufs submodule at the merged interdevice protos * indicator: pin device-ui to the branch with the remote SD support * indicator: honor the txOnly flag of flush, report dropped GPS writes flush() through a Stream pointer discarded the receive buffer: the flag is txOnly, and HardwareSerial::flush() keeps what has been received. write() reported bytes as written even when the link refused to send them. The link probe uses Throttle for its rate limit. * indicator: decide the log tag on the formatted message, hex request ids The thread tag was suppressed based on the printf template, which disagrees with the rendered message it is compared against: a format starting with a conversion could produce two tags, and one without a trailing bracket-space lost the tag entirely. vprintf now receives the thread name and picks. Also shifts only the bytes actually buffered after a frame, throttles with Throttle and logs request ids as hex. * indicator: SD mount, eject and format commands over the link * indicator: bound how long a busy card state blocks the UI task * indicator: a busy co-processor must not block the UI task for ever The busy retry re-armed its own budget on every busy answer, so a co-processor that stayed busy kept the caller in the loop with no way out. Transport retries and the wait for a busy card are now separate budgets that only count down. * indicator: start each request from an aligned receive buffer A byte run lost mid-response (a UART overflow during a 4KB tile chunk, when the display starves the RX interrupt) misaligns the assembly buffer. The buffer was never reset, so the poison outlived the request and cascaded into the following chunks of the same tile: one glitch dropped a whole multi-chunk tile, while single-chunk tiles resynced in the idle gap and survived. Each request now flushes the buffer first, bounding a glitch to the one chunk it hit. Adds resync/decode/timeout counters, logged rarely, to see the rate. * indicator: enlarge the LVGL heap for low-zoom map tiles The heap was 3MB and the image cache reserves 1.5MB of it, so a low-zoom map tile could not find a large enough contiguous block to decode and rendered white. 5MB of the 8MB PSRAM fixes it with room to spare. * indicator: advance the device-ui and protobufs pins to the merged commits Point the protobufs submodule at the merged SD command protos (protobufs #986) so it matches the checked in interdevice sources, and bump the device-ui archive to the current indicator branch tip that carries the SD button and format UI. * Update device-ui library dependency URL * remove cutom sdkconfig * remove duplicated synchronisation (after PR11278 is in place) * set commit reference to updated RemoteSDService class * Add board_level configuration for release * fix cppcheck errors --------- Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: CodeRabbit <noreply@coderabbit.ai> Co-authored-by: mverch67 <manuel.verch@gmx.de> |
||
|
Thomas GöttgensandAustin
|
ecd59e3120 |
Package meshtasticd for Windows as an MSI (#11289)
* Package meshtasticd for Windows as an MSI Adds a --service flag connecting meshtasticd to the Service Control Manager, a WiX MSI installing it as an auto-start LocalSystem service with config in %ProgramData%\Meshtastic, and a CI step attaching the MSI to releases. * Address review comments Bind workflow expressions to env vars in run: bodies, and build the service status per call with an atomic checkpoint. * Fix service stop state and CI lint Latch the stop under a mutex so a startup report cannot walk the state back. Ignore the new workflows in semgrep and checkov, as main_matrix already is. * Drop the checkov ignore for the winget workflow Resolve the newest release inside the job instead of taking workflow_dispatch inputs, so CKV_GHA_7 no longer fires and checkov stays active on the file. * Carry the MSI architecture into the winget manifest Parse it from the asset name instead of defaulting to x64, and fail on a multi-arch release rather than validating one at random. * Restore release/.gitignore * Leave the main matrix alone Release attachment moves to the matrix rework in #11151. The MSI is still built and uploaded as a CI artifact. --------- Co-authored-by: Austin <vidplace7@gmail.com> |
||
|
|
1e982fa78c |
Sign plaintext packets in licensed mode (#10969)
* feat: sign licensed plaintext packets Preserve and publish identity keys in licensed mode so existing XEdDSA signatures can authenticate plaintext traffic. Sign licensed broadcasts and direct messages when they fit, while keeping PKI encryption disabled and normal routing behavior unchanged. * fix(security): persist licensed channel sanitation * fix(security): close licensed migration lifecycle gaps * fix(security): address licensed signing review feedback * test: restore signing globals from Unity teardown * fix(baseui): allow confirmed ham region selection * fix(baseui): guard region picker validation * style: trunk fmt --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com> |
||
|
Jorropo
|
9e529da460 | replace screens with unique_ptr (#11163) | ||
|
Ben Meadors
|
cad3a3a5c7 |
Always exclude range test
Range test is excluded on every target as of 2.8, so set MESHTASTIC_EXCLUDE_RANGETEST=1 globally in [env] build_flags and drop the now-redundant per-variant flags from esp32, rak11200 and stm32. Guard RangeTestModule.cpp with the same condition used in Modules.cpp so the translation unit compiles to nothing rather than relying on --gc-sections to strip it, and always report RANGETEST_CONFIG in the device metadata excluded_modules bitmask so clients hide the config. |
||
|
Ben Meadors
|
6e48fac741 | Merge pull request #11125 from meshtastic/baseui_fixindicator | ||
|
Jason P
|
ef386afee5 | Fixes SEEED Indicator when booting to BaseUI | ||
|
Benjamin Faershtein
|
08cfb3d683 | Merge upstream develop into packet authentication policy | ||
|
Thomas Göttgens
|
023351a979 |
Remove dead code (#11082)
Removed: - MessageStore::addFromPacket and addFromString, superseded by tryAddFromPacket - GeoCoord rangeRadiansToMeters, distanceTo, bearingTo - Router::rawSend, declared virtual with no override and no caller - ContentHandler handleHotspot, handleFs, handleAdminSettings, handleAdminSettingsApply, handleDeleteFsContent and their commented route registrations, plus the now unreachable htmlDeleteDir and the handleUpdateFs declaration that had no definition - ContentHelper replaceAll - OnScreenKeyboardModule popup chain: showPopup, clearPopup, drawPopup, drawPopupOverlay and their state, unreachable since the frame based UI was replaced by baseUI - DebugRenderer drawDebugInfoTrampoline, drawDebugInfoSettingsTrampoline and the orphaned drawFrameSettings - NodeListRenderer calculateMaxScroll, drawColumns and a stale extern haveGlyphs declaration with no definition - UIRenderer::haveGlyphs, Screen::blink, NotificationRenderer::showKeyboardMessagePopupWithTitle, VirtualKeyboard::getInputText - InkHUD touchNavLeft, touchNavRight, Applet::getActiveNodeCount, ThreadedMessageApplet::saveMessagesToFlash - TwoButton::setHandlerUp, TwoButtonExtended setHandlerUp, setJoystickDownHandlers, setJoystickUpHandlers - CannedMessageModule LaunchRepeatDestination, isCharInputAllowed, hasMessages - TrafficManagementModule resetStats, recordRouterHopPreserved, saturatingIncrement - UnitConversions::MetersPerSecondToMilesPerHour - EncryptedStorage getSessionRemainingSeconds - BMI270Sensor::writeRegisters, GPS::hasFlow, FSCommon copyFile, SerialConsole consolePrintf, buzz playLongPressLeadUp, memGet displayPercentHeapFree |
||
|
Benjamin Faershtein
|
59ab12675a | Merge develop into packet authentication policy | ||
|
Thomas Göttgens
|
a808e992a1 | Add native Windows build of meshtasticd (#11031) | ||
|
Andrew YongandBen Meadors
|
b71c1adb26 |
stm32wl: add hardware RTC support (rak3172) (#10961)
* stm32wl: add hardware RTC support infrastructure Wires the STM32WL chip's internal RTC (running off the LSE 32.768kHz crystal) into meshtastic's existing time-of-day framework (perhapsSetRTC()/readFromRTC()), following the same pattern already used for I2C RTC chips (RV3028, PCF8563/85063, RX8130CE). LSE is started and polled manually before ever calling into the STM32RTC library, with our own bounded timeout - the library's own internal LSE startup path has no bounded fallback and hangs forever via Error_Handler() if the crystal never locks, so this is required for a board with a missing/faulty crystal to boot normally rather than hang. Gated behind a new HAS_LSE variant flag (currently unset everywhere, so this is inert until a variant opts in - see follow-up commit). Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> * gps: qualify RTC.h includes to avoid case-insensitive filesystem collision with STM32RTC The stm32duino STM32RTC library (added to lib_deps in a follow-up commit) ships its own src/rtc.h. On case-insensitive filesystems (the macOS default), an unqualified #include "RTC.h"/<RTC.h> from any file outside src/gps/ resolves to the library's rtc.h instead of src/gps/RTC.h, since PlatformIO's LDF puts lib_deps include paths ahead of the project's own -Isrc/gps. Qualify every include as gps/RTC.h so it can't collide with any same-named header a future dependency might ship, regardless of filesystem case sensitivity. Purely mechanical, no behavior change. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> * stm32wl(rak3172): enable hardware RTC support Opts rak3172 into the HAS_LSE infrastructure added previously: sets STM32WL_LSE_DRIVE to a conservative default and pulls in the STM32RTC library. rak3172 has ~63KB flash headroom going in; build-verified at 76.7% flash usage after this change (up from a 73.8% baseline), well within budget. wio-e5 is not opted in here despite sharing the same STM32WLE5 chip - it's already at 96.8% flash usage today (GPS + I2C sensor support compiled in, unlike rak3172), leaving too little headroom to safely add STM32RTC without first trimming something else. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> * stm32wl: add docstrings for LSE/RTC setup functions Addresses CodeRabbit's docstring coverage check on PR #10961. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> * stm32wl: address CodeRabbit nitpicks on PR #10961 - Brace the single-statement HAS_LSE branch in perhapsSetRTC() to match the sibling readFromRTC() branch's style. - Quote the RTC.h include in PhoneAPI.cpp for consistency with every other qualified include site. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> --------- Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Manuel
|
f52e2ea8ef | fix SPI1 instances (#10983) | ||
|
Benjamin Faershtein
|
d6b12ea3f1 | feat(security): enforce packet authenticity policies | ||
|
Andrew YongandBen Meadors
|
6768bd08df |
fix(modules): null-check packetPool/clientNotificationPool/mqttClientProxyMessagePool allocations (#10951)
* fix(modules): null-check packetPool/clientNotificationPool/mqttClientProxyMessagePool allocations Follow-up to fix/meshpacket-alloc-null-checks (PR meshtastic/firmware#10948), which fixed the core routing path (Router/NextHopRouter/ReliableRouter/ MeshService/RadioLibInterface) after reproducing a HardFault on STM32WL hardware under real mesh traffic. This covers the same allocCopy()/ allocZeroed() unchecked-return pattern in lower-frequency paths that were out of scope for that PR: SimRadio.cpp (portduino sim RX/TX), NodeInfoModule, the Telemetry modules' power-saving-sleep notifications, MQTT (map report, client-proxy messages, config-validation notifications), PositionModule, SerialModule, and KeyVerificationModule. Sites where the allocation result was already read back through an existing null check downstream (e.g. Telemetry's lastMeasurementPacket, SimRadio's receivingPacket, AdminModule::sendWarning) were left as-is - verified safe, not touched. Router::allocForSending() (and everything that funnels through it, e.g. allocDataProtobuf()) remains unguarded and out of scope here too - it's called from 30+ sites across the codebase and needs its own audit. Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> Signed-off-by: Andrew Yong <me@ndoo.sg> * fix(KeyVerificationModule): bound cn->message writes with snprintf CodeRabbit flagged unbounded sprintf() writes into the fixed-size ClientNotification.message buffer as a static-analysis nitpick while reviewing this PR's allocation null-checks. Align these four sites with the snprintf(dest, sizeof(dest), ...) pattern already used for the same field elsewhere in this PR (SerialModule.cpp, MQTT.cpp). Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Andrew YongandBen Meadors
|
d16ae2b098 |
Rename power.h to Power.h for casing consistency with Power.cpp (#10919)
Every other .cpp/.h pair in src/ (350 of 351) uses identical capitalization between the two files. Power.cpp/power.h was the sole outlier; this aligns it with the rest of the codebase. No functional change — all includes already resolved this file the same way on case-sensitive filesystems. Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Ben Meadors
|
97302f1845 |
Add Meshnology W10 AIOT Dev Kit (SX1262 via MCP23017 I2C expander) (#10911)
* Add software LoRa IRQ polling and an MCP23017 expander HAL for radios behind an I2C expander
Some boards route the SX126x control lines (NRESET/DIO1/BUSY) through an I2C
GPIO expander instead of native GPIOs, and don't wire the expander's /INT to
the MCU, so RadioLib cannot take a hardware DIO1 interrupt.
Two reusable pieces, both gated behind USE_MCP23017 / LORA_DIO1_SOFTWARE_POLL
so builds that don't define them are unaffected:
- ExtensionIOMCP23017 + MCP23017LockingArduinoHal: a RadioLib HAL that maps
virtual pins (MCP23017_VPIN_BASE .. +15) onto an MCP23017's GPIO, so
RESET/BUSY/DIO1 reads and writes become I2C transactions while the real SPI
GPIOs (SCK/MOSI/MISO/CS) pass straight through. A failed I2C read skips the
read-modify-write rather than clobbering the rest of the bank.
- LORA_DIO1_SOFTWARE_POLL: with no DIO1 interrupt available, the SX126x
interface polls the radio IRQ status register from the radio thread and
synthesizes the ISR_TX/ISR_RX events, filtering noisy preamble/header IRQs so
they can't starve TX. A 1 ms ISR_POLL_TICK drives the poll; TX timers may
overwrite the pending tick (pollMissedIrqs() is the backup that bounds the
latency of the busy-Rx contention window). Behaviour is unchanged on all
boards that keep the hardware interrupt.
* Add Meshnology W10 AIOT Dev Kit variant (SX1262 via MCP23017 expander)
ESP32-S3R8 + EBYTE E22-900MM22S (SX1262) + AXP2101 PMIC + Quectel L76KB GPS +
SPI TFT, with the radio's RESET/DIO1/BUSY and the LCD reset routed through an
MCP23017 I2C expander at 0x20. The expander's /INT is not wired to the ESP32,
so DIO1 uses the software poll. Pins come from the board schematic and the
vendor firmware; the expander is an MCP23017 despite the V1.1 schematic's stale
'TCA9555' label (the V1.2 placement diagram and all vendor code use the MCP23017
register map).
A local pins_arduino.h shadows the generic esp32s3 variant to drop RGB_BUILTIN,
which otherwise pulls the Arduino RMT HAL into the link and fails against this
build's trimmed FreeRTOS config.
Reports HardwareModel 140 (MESHNOLOGY_W10, already present in the protobufs).
Hardware-verified on a real W10 AIOT Dev Kit: AXP2101 PMU, MCP23017, SX1262
init + a full over-the-air TX/RX round trip through the expander, PCF85063 RTC,
SHT41 and QMI8658 auto-detected, and an L76KB GPS fix.
* meshnology-w10: enable ES8311 speaker for notification tones
Bring up the ES8311 codec (I2C 0x18) -> NS4150 amp -> speaker so the board can
play notification tones / ringtones over the I2S buzzer path (the
use_i2s_as_buzzer external-notification option). Codec2 voice stays out of
scope: it is SX1280-only and this is a sub-GHz board.
- variant.h: HAS_I2S + DAC_I2S pins (MCLK=1, BCK=2, WS=4, DOUT=5, DIN=3)
- platformio.ini: arduino-audio-driver + ESP8266Audio + ESP8266SAM
- extra_variants/meshnology_w10/variant.cpp: lateInitVariant() configures the
ES8311, mirroring the other Meshtastic ES8311 boards. Kept codec-only (no
main.h) so the audio driver's 'using namespace audio_driver' does not pull a
conflicting GpioPin into scope alongside Meshtastic's class GpioPin.
- AudioThread.h: toggle the NS4150 amp (MCP23017 EXIO_PA_CTRL) around playback.
Verified on hardware: a test tune played audibly through the speaker.
* meshnology-w10: address review feedback on the MCP23017 driver
- ExtensionIOMCP23017: serialize register access with a mutex, since the radio
HAL (BUSY/DIO1/RESET) and AudioThread (amp enable) now reach the expander from
different threads and the read-modify-write paths are not atomic.
- digitalRead: return a fail-safe HIGH on a failed read instead of LOW, so a
transient I2C error on the LoRa BUSY line can't look like 'ready' and let
RadioLib start an SPI transaction early. (DIO1 is polled via the radio IRQ
register, not this pin.)
- enablePinChangeInterrupt: use the checked readReg() overload and skip on a
failed read, matching the other read-modify-write helpers.
- meshnology_w10 variant.cpp: log a warning if an ES8311 register write NACKs
instead of silently leaving the codec half-configured.
- RadioInterface.cpp: guard the MCP23017 HAL branch with ARCH_ESP32 to match the
include and driver-file guards.
* Replace board-model audio/sleep ifdefs with reusable variant capability macros
Two shared-code spots keyed off specific hardware models; move the board-specific
detail into opt-in macros the variants define, so the core code stays generic and
new boards can opt into the behavior class without touching shared files.
- AudioThread amp control: drop the T_LORA_PAGER / MESHNOLOGY_W10 ifdefs. A board
with an I2S amp now defines AUDIO_AMP_ENABLE(on) in its variant.h (T-LoRa Pager
and Meshnology W10 do), and AudioThread just calls it around playback. The
expander includes are keyed on USE_XL9555 / USE_MCP23017 (capabilities) instead
of the model name.
- Light-sleep / DIO1 wakeup: drop the SENSECAP_INDICATOR check. Boards whose
LORA_DIO1 is an expander pin (not an ESP32 GPIO) define LORA_DIO1_EXTENDED_IO
(SenseCAP Indicator and Meshnology W10), and sleep.cpp keys off that for both
the light-sleep skip and the DIO1 GPIO-wakeup skip. This also fixes a latent
issue on the SenseCAP: it previously reached the GPIO-wakeup path and called
gpio_pulldown_en() on a virtual expander pin; it now skips that cleanly.
Builds verified on meshnology_w10, tlora-pager, and seeed-sensecap-indicator.
* meshnology-w10: silence cppcheck constParameterPointer on the ISR-callback helper
isIsrTxCallback() takes a function pointer it only compares; cppcheck's
constParameterPointer wants it 'pointer to const', which is meaningless for a
function pointer (the codebase already globally suppresses the sibling
constParameterCallback). Inline-suppress it to keep the check green.
* HopScaling: qualify the member assignment as this->count
cppcheck (CI's version) flags 'count = newCount;' at the end of trimIfNeeded()
as uselessAssignmentArg ('assignment of function parameter has no effect') - a
false positive, since count is a member that outlives the call. Write it as
this->count (matching the Step-1 assignment above) so the analyzer sees a member
write. This finding comes in via the develop merge, not this board; fixing it
here to unblock the PR's cppcheck check.
|
||
|
Ben Meadors
|
24c1dccf00 |
CI: track RAM (.data+.bss) in size reports and gate on per-env budgets (#10899)
* CI: track RAM (.data+.bss) in size reports and gate on per-env budgets
The 2.8.0 nRF52840 heap regression (99% heap in field reports) shipped
invisibly because CI only tracked flash. On nRF52840 the heap arena is the
linker gap after .bss, so every byte of static .data+.bss growth shrinks the
usable heap 1:1 - RAM needs the same guardrails flash already has.
What's added:
- bin/platformio-custom.py emits ram_bytes (.data + .bss from the ELF, via
the toolchain size tool) into each .mt.json manifest. Heap/stack
placeholder sections are deliberately excluded.
- bin/collect_sizes.py records {flash_bytes, ram_bytes} per env;
bin/size_report.py grows RAM and RAM-delta columns in the PR size report.
Older artifacts without ram_bytes (and legacy int-schema baselines)
degrade to "n/a" instead of crashing.
- bin/ram_budgets.json: per-env RAM/flash budgets, enforced only for envs
listed there. Seeded with rak4631: ram 113,000 (current 110,948 + ~2 KB
slack), flash 786,000 (current 765,192 + ~20 KB; the app region is
0x27000..0xEA000 = 798,720 and the image must stay clear of the
warm-store ring guard in extra_scripts/nrf52_warm_region.py).
- New size-budget-gate CI job runs size_report.py --enforce-budgets and
fails the build on violation; the informational firmware-size-report job
now also renders budget usage into the PR comment.
- src/main.cpp: opt-in boot heap watermark (-DMESHTASTIC_HEAP_WATERMARK_CHECK)
logs LOG_ERROR when less than 20% of the heap is free at the end of
setup(). Off by default; skipped on platforms without heap accounting.
How budgets are raised: deliberately, never automatically. If a change needs
more headroom, bump the env's limit in bin/ram_budgets.json in the same PR
and justify the increase in the PR description.
Verified: python3 bin/test_size_scripts.py (23/23 pass, including ram_bytes
parsing, n/a fallback, and over/under/missing-env budget-gate cases).
* Address review: fail the budget gate closed, fix RAM section matching
- size-budget-gate workflow: drop continue-on-error on the manifest
download and the empty-dir fallback, so the job fails when the data it
gates on cannot be fetched.
- size_report.py --enforce-budgets now fails closed on every
missing-data path instead of trivially passing: empty collected sizes,
a budgeted env that was not built, or a manifest without the budgeted
metric. Report-only mode keeps rendering those as n/a.
- load_budgets() rejects zero/negative/non-integer budgets with a clear
error (a typo'd budget could previously crash budget_markdown with
ZeroDivisionError or silently skip the check); the percentage render
keeps a defensive guard for direct callers.
- compute_ram_bytes(): count RISC-V small-data sections (.sdata/.sbss)
and exclude ESP-IDF .rtc.* sections, which live outside the
heap-competing SRAM.
- Trim the heap-watermark comment in main.cpp to two lines.
bin/test_size_scripts.py: 27/27 - the two fail-open assertions are
flipped to fail-closed, with new report-only counterparts plus cases for
empty sizes under enforcement and malformed budgets.
|
||
|
Ben Meadors
|
6c7ee8afc7 |
Add MemAudit: per-subsystem heap accounting in the boot log (#10900)
* Add MemAudit: per-subsystem heap accounting in the boot log The 2.8.0 nRF52840 heap-exhaustion field reports had to be diagnosed by hand, reconstructing each subsystem's heap footprint from source and build flags one report at a time. This makes every future report self-diagnosing from the serial log: a tiny fixed-size registry (src/memory/MemAudit.*) that big long-lived allocations report into, printed as one line at the end of setup() and alongside the periodic "Heap free:" log: MemAudit[boot]: tmm=2500 warm=4000 pkthist=5824 nodedb=13440 msgstore=2200 pktpool(live)=3270 total=31234 Instrumented: NodeDB hot vector (nodedb) + satellite maps (satmaps, rb-tree overhead estimated), WarmNodeStore (warm), PacketHistory records and hash index (pkthist), TrafficManagement caches (tmm/tmm_ni), MessageStore text pool (msgstore), TFT line/repaint buffers (display), and live in-flight packets (pktpool(live)) via an optional audit tag on the packet pool allocator - the one hot path, counted with a relaxed 32-bit atomic add (single instructions on Cortex-M, no locks). Cost: 128 B RAM for the 16-tag table, well under 1 KB flash on rak4631. MESHTASTIC_MEM_AUDIT=0 compiles it out to inline no-op stubs (call sites need no ifdefs); STM32WL, the tightest flash target, defaults off. New native suite test_mem_audit covers add/set/snapshot arithmetic, tag reuse (pointer and cross-TU strcmp fallback), null/unknown tags, and table-full behavior; test/native-suite-count bumped to 28. * native-wasm: add src/memory/ to the curated source filter The wasm env denies all sources and adds an explicit file list; MemAudit callers (main, MeshService, NodeDB, PacketHistory) are in that list but src/memory/MemAudit.cpp was not, so wasm-ld failed on undefined memaudit:: symbols. |
||
|
Thomas Göttgens
|
7509c1a6dd |
Seeed Tracker X1 Support (#10834)
* Seeed Tracker X1 Support * silence CPPCheck * fix macro order regression and adapt stm32hal for new radiolib * STM32 is a radiolib upstream fix ( https://github.com/jgromes/RadioLib/issues/1825 ) * fix STM32 regression * Seeed Tracker X1 Support * silence CPPCheck * fix macro order regression and adapt stm32hal for new radiolib * STM32 is a radiolib upstream fix ( https://github.com/jgromes/RadioLib/issues/1825 ) * fix STM32 regression * address copilot OCD * Split behavior only when the two LEDs are on distinct pins. * bring naming in line with the other seeed devices * update env name to fit convention too * guarantee evaluation order * Guard sensor readings against null values, make sensor use less power |
||
|
Tom
|
3becaf2d95 | emdashes begone (#10847) | ||
|
|
e64d20548c |
feat(eth): port mesh/http to RP2350 + W5500 (HTTP/80 + HTTPS/443) (#10573)
* add watchdog to rp2xx0
* feat(eth-api): phase 0 skeleton — HTTP API server on TCP/80 (503 only)
First step of porting mesh/http/ to RP2350 + W5500 (today ESP32-only).
Phase 0 stands up the listener over the existing arduino-libraries/Ethernet
stack (no Mongoose — its built-in TCP/IP would conflict with EthernetServer
and break OTA/MQTT/NTP). Skeleton parses request line, logs it, replies 503.
Real handlers (/api/v1/{info,fromradio,toradio}) come in later phases.
- New mesh/eth/ethApiServer.{h,cpp} gated by HAS_ETHERNET_API
- Wired into ethClient init+loop in parallel with existing ethHttpOTA (port 4244)
- Enabled in both wiznet_5500_evb_pico2_e22p and pico2_w5500_e22 variants
- Build impact on wiznet: +~9 KB flash (63.0% used), <1 KB RAM
* feat(eth-api): phase 1 — implement /api/v1/{fromradio,toradio} with PhoneAPI
Replace phase 0 skeleton with the real handlers that bridge the HTTP transport
to PhoneAPI, mirroring mesh/http/ContentHandler (ESP32) semantics.
- EthHttpAPI : public PhoneAPI (api_type=TYPE_HTTP, checkIsConnected=true),
outside the MESHTASTIC_EXCLUDE_WEBSERVER gate so it builds on RP2350.
- Minimal HTTP parser: method/path/query/Content-Length, no allocations beyond
Arduino String, capped at 32 header lines x 256 bytes (anti-DoS).
- OPTIONS preflight -> 204 with CORS + X-Protobuf-Schema.
- GET /api/v1/fromradio[?all=true]: stream-write up to 64 protobufs from
webAPI.getFromRadio(), Connection: close framing (HTTP/1.0 style).
- PUT /api/v1/toradio: read Content-Length bytes (<=512), call
webAPI.handleToRadio(), echo body back.
- 404 default for unknown paths, 405 for wrong method, 400 for bad body.
Validated e2e against wiznet @ 192.168.1.143:
- OPTIONS /api/v1/fromradio -> 204 + correct CORS headers
- PUT ToRadio{want_config_id=1} (2 bytes) -> 200 + echo
- GET /api/v1/fromradio?all=true -> 200 + 3476 bytes (config+channels+nodeinfo)
- GET /api/v1/nonexistent -> 404 unknown endpoint
- OTA HTTP on port 4244 untouched and still responsive
Build impact on wiznet_5500_evb_pico2_e22p: +2 KB flash (63.1%), +1.8 KB RAM
(17.6%) vs phase 0.
* fix(eth-api): move accept loop to dedicated OSThread (20ms tick)
The API server was being polled from the Ethernet client Periodic which runs
every 5s. Measured impact before this fix on wiznet @ 192.168.1.143:
req 1: ttfb=6.458s total=6.509s (matches the 5s tick + handler overhead)
req 2: connection refused (W5500 sockets exhausted)
req 3: connection refused
After: same hardware, same network, back-to-back requests:
req 2: ttfb=0.287s
req 3: ttfb=0.015s
req 4: ttfb=0.022s
req 5: ttfb=0.020s
The web client (meshtastic/web served from localhost) was visibly stalling
mid-handshake — it had pulled 109 nodes + 19 messages but channels and device
info never arrived. With the periodic-only polling, every request takes 5s
and the W5500's 4 hardware sockets fill up under the burst.
EthApiServerThread mirrors the WebServerThread pattern from ESP32
mesh/http/WebServer.cpp: adaptive interval — 20ms when there's recent
traffic, 100ms after 5s of idle, 500ms after 30s. Auto-registers with the
OSThread scheduler on construction.
ethHttpOTA still ticks from the periodic; left unchanged because OTA is one
large transfer that tolerates the latency, and minimizing scope here to one
behaviour change at a time.
* refactor(eth-api): extract handlers to shared module via IStreamReadWrite
Phase 2.0 of the TLS port — separate transport from request handling so
the upcoming HTTPS server can reuse the exact same parser + routing logic.
- New ethApiHandlers.{h,cpp}: Request, parser, CORS helpers, fromradio/toradio
handlers, EthHttpAPI : PhoneAPI subclass. All driven by a single
IStreamReadWrite interface that inherits Print (so client.print(...) keeps
working transparently).
- ethApiServer.cpp slimmed to ~90 LOC: now just the EthernetServer(80) +
OSThread + an EthernetClientStream adapter that forwards reads/writes to
the underlying EthernetClient. No behaviour change.
Validated on wiznet @ 192.168.1.143: 5 curl requests TTFB 18-110ms (same
as pre-refactor), protobuf round-trip PUT 200 + GET ?all=true 3499 bytes.
Flash impact: +200 bytes (63.2%); RAM unchanged (17.6%).
* feat(eth-tls): ECDSA P-256 self-signed cert generation for HTTPS API
mbedTLS-based cert generation module that produces a SAN=IP self-signed
ECDSA P-256 server certificate, persisted under LittleFS so subsequent
boots reuse the same key. Generation runs once on a dedicated OSThread
so the ECDSA keygen path (~430 ms) never blocks the Periodic stack or
the Ethernet reconnect loop.
- mbedTLS 3.6.2 sources compiled in via scripts/add_mbedtls_sources.py
(BuildSources of pico-sdk/lib/mbedtls/library/*.c, all 108 files).
MBEDTLS_USER_CONFIG_FILE injected as CPPDEFINES tuple in the script —
build_flags shell escape mangles the embedded quotes on Windows.
- src/mbedtls_user_config.h undefs MBEDTLS_HAVE_TIME, HAVE_TIME_DATE,
TIMING_C, NET_C, FS_IO, PSA_ITS_FILE_C, PSA_CRYPTO_STORAGE_C, and
defines MBEDTLS_NO_PLATFORM_ENTROPY (entropy_poll.c uses a raw
platform check, not gated by a flag).
- src/mesh/eth/ethCert.{h,cpp}: ECDSA P-256 keypair + cert with
SAN(IP=current) using pico-sdk get_rand_64() directly as f_rng,
bypassing mbedtls_entropy. DER buffers heap-allocated to keep the
OSThread stack within budget. Cert + key + ip persisted under
/prefs/eth_*.der so subsequent boots reuse the same identity.
- Gated by HAS_ETHERNET_TLS_API. Standalone phase: generation only;
HTTPS server (TCP/443) wired up in the follow-up commit.
* feat(eth-tls-api): phase 2.2 — HTTPS server on TCP/443 reusing handlers
Brings up an mbedTLS server on port 443 that defers to the ECDSA P-256
self-signed cert produced by [[ethCert]]. Reuses the HTTP request /
response handlers from [[ethApiHandlers]] via the IStreamReadWrite
interface — there is exactly one code path for routing / CORS / PhoneAPI
integration regardless of whether the transport is plain TCP or TLS.
EthTlsApiServerThread (OSThread):
- Phase A: poll isEthCertReady() every 500 ms while the cert worker
runs. Once true, parse cert chain + key, build ssl_config (TLS server,
stream transport, default preset, VERIFY_NONE since we are the cert
issuer), install own cert, run ssl_setup, bind tlsServer on 443.
- Phase B: standard adaptive accept loop (20 / 100 / 500 ms tick),
identical to the plain-HTTP server.
Per-connection flow:
1. session_reset on the static ssl context (1 in-flight session — multi-
session pool is Phase 3 if needed)
2. set_bio routes mbedtls I/O to two C callbacks (netSend / netRecv)
that bridge to the live EthernetClient via the void* ctx
3. handshake loop (sync, blocking, with 10 s recv timeout) — mbedTLS
errors are logged with mbedtls_strerror
4. wrap (ssl, client) in MbedTlsStream → handleApiClient(stream)
5. close_notify + client.stop
Stack budget continues the Phase 2.1-bis discipline: every large buffer
(ssl context, cert chain, pk_key, ssl_config) lives in BSS as a static
global. The OSThread stack only holds the per-connection EthernetClient
adapter and small mbedtls return codes.
Validated on wiznet 192.168.1.143:
- cert load-from-FS path: 13 ms (regen skipped on second boot)
- cert gen path: 290 ms (first boot only)
- ssl_setup chain: parse cert, parse key, ssl_config_defaults,
conf_own_cert, ssl_setup all return 0
- end-to-end: curl -k https://192.168.1.143/api/v1/fromradio → 200 OK
with application/x-protobuf, CORS, X-Protobuf-Schema headers, server
initiates close_notify cleanly
Footprint vs 2.0:
- flash 70.5% → 87.3% (+220 KB for mbedtls_ssl + x509 server-side code)
- RAM static 17.6% → 19.8% (+11 KB BSS for ssl_context + cert chain)
- heap at runtime adds ~32 KB per active session (mbedtls in/out
record buffers, default MBEDTLS_SSL_*_CONTENT_LEN=16384)
Next: validate from Firefox direct (https://192.168.1.143 → warning
accept → JSON visible), then from client.meshtastic.org hosted to
confirm the mixed-content block is gone.
* fix(eth-tls): add KeyUsage + EKU serverAuth and cap TLS 1.2 for browser compat
Two browser-compat fixes that surfaced in Firefox validation:
1. Cert v1 only had Basic Constraints + SAN. NSS / Firefox refuse to
treat a cert as a TLS server cert without an Extended Key Usage
extension naming id-kp-serverAuth since 2023 — the error surfaces as
a non-overridable 'Secure Connection Failed' with no 'Accept the
Risk' path. Add KeyUsage(digitalSignature + keyEncipherment, critical)
and ExtendedKeyUsage(serverAuth, critical). Bump cert/key/ip file
paths to '_v2' so live boards regenerate on next start instead of
loading a v1 cert that the browser silently refuses.
2. pico-sdk mbedtls defines MBEDTLS_SSL_PROTO_TLS1_3 in its default
config, but the server-side 1.3 plumbing in this vendored build is
incomplete: Firefox and openssl-3.5's s_client default to 1.3 and
the handshake dies 4 ms in with MBEDTLS_ERR_ERROR_GENERIC_ERROR
(-0x0001). curl/SChannel happened to default to 1.2 so it masked the
issue earlier. Cap min/max_tls_version to TLS 1.2 — clients downgrade
transparently and we keep the ECDHE-ECDSA + AES-GCM / CHACHA20-POLY1305
suites that already work end-to-end.
Validated on wiznet 192.168.1.143:
- cert v2 dumps with the 4 extensions visible (openssl x509 -text):
BasicConstraints CA:FALSE, KeyUsage(critical) digitalSignature +
keyEncipherment, ExtendedKeyUsage(critical) serverAuth, SAN IP.
- openssl s_client (no version flag): downgrades to TLS 1.2, handshake
completes, verify_return=18 (self-signed, expected).
- Firefox: warning self-signed -> Advanced -> Accept Risk -> handshake
OK in 632 ms with CHACHA20-POLY1305, request reaches handleApiClient
and returns the protobuf body.
* perf(eth-api): HTTP/1.1 keep-alive — one handshake per session, not per request
Before this change /fromradio used 'Connection: close' framing (HTTP/1.0
style with no Content-Length), forcing each poll to redo the full TLS
handshake. client.meshtastic.org needs ~80 sequential /fromradio polls
during initial sync (one per packet from the config-replay state
machine: MyInfo, channels, every Config_*, every ModuleConfig_*, every
NodeInfo), so the user-visible load time was ~50 s of pure handshake
overhead (80 requests * ~625 ms ECDSA P-256 each).
Three coordinated changes:
1. handleApiClient() now loops on the same connection until the peer
closes or parseRequest hits its 3 s idle timeout. requestsServed
counter keeps the 'bad/timeout request' debug log from firing on
the natural idle close after a keep-alive sequence.
2. handleFromRadio() buffers all packets into a std::vector before
writing, so it can emit a real Content-Length and 'Connection:
keep-alive'. Buffer is dynamic — common 1-packet response only
allocates ~256 B; ?all=true keeps the 64-packet cap which tops out
around 16 KB. handleToRadio + sendPreflight switched to keep-alive
too (they already had real Content-Length). sendError keeps close —
errors are terminal.
3. ethTlsApiServer netRecv RECV_TIMEOUT_MS dropped from 10 s to 3 s so
mbedtls_ssl_read can't outlast the handler's idle deadline (a quiet
browser leaving the socket open would otherwise wedge the OSThread
for 10 s past the natural close).
Measured on wiznet 192.168.1.143 against client.meshtastic.org:
- one TLS handshake (641 ms, CHACHA20-POLY1305)
- ~80 requests pipelined over the same session
- full config + 40 NodeInfos in ~6-8 s (vs ~50 s before)
- per-request latency post-handshake: ~10-25 ms
- curl -kv with two URLs: 'Reusing existing https: connection',
server returns 'Connection: keep-alive' explicitly.
* fix(eth-tls): watchdog + Chrome compat — handshake stability across browsers
Phase 3 keep-alive shipped a working Firefox flow but client.meshtastic.org
loops + Chrome 'Test Connection' both rebooted the board. Four distinct
issues; collectively they kept the OSThread inside serveClient() too long
or spin-looping without yielding, and pico-sdk mbedtls' TLS 1.3 code path
choked on Chrome's modern ClientHello.
1. Watchdog reset during keep-alive idle. Once a client drained the
replay queue and entered 3 s poll mode, the OSThread sat inside
netRecv()'s busy-wait waiting for the next request. Two consecutive
3 s waits plus prior handler time crossed the 8 s RP2350 hardware
watchdog. Pet the watchdog inside netRecv()'s poll loop (every 2 ms)
so a quiet client can never starve the watchdog. Same fix in the
ethApiHandlers per-request yield path.
2. Cap session at 64 requests + yield() between. Defense-in-depth: a
pathological client can't monopolize serveClient indefinitely; after
the cap it just re-handshakes (~625 ms), still vastly cheaper than
the per-request handshake we had before keep-alive.
3. TLS 1.3 code compiled out of mbedtls entirely
(#undef MBEDTLS_SSL_PROTO_TLS1_3 in mbedtls_user_config). Capping
max_tls_version=TLS1_2 at runtime is enough for Firefox / openssl
(they downgrade cleanly), but Chrome's ClientHello carries TLS 1.3
extensions — post-quantum key shares, Encrypted ClientHello,
etc. — that the vendored mbedtls 1.3 parser crashes on before the
downgrade decision happens. Removing the 1.3 sources sidesteps the
parser; ServerHello just announces TLS 1.2 and Chrome accepts.
4. netSend infinite WANT_WRITE spin. When W5500's TX buffer momentarily
filled mid-handshake (Chrome draining slower than Firefox during
ServerKeyExchange), EthernetClient::write() returned 0, our netSend
returned MBEDTLS_ERR_SSL_WANT_WRITE without delay, mbedtls retried
immediately, repeat at ~180k iter/sec until ... well, until the
board's other threads got nothing done. Log signature: ret=-0x6880
tight-looping in the handshake iter trace. Rewrite netSend to block
with delay(2) + watchdog_update() and a 3 s timeout — same shape as
netRecv. Return MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY on disconnect
(was incorrectly returning WANT_WRITE).
Also added granular per-iter handshake logging gated on first 20 iters
+ every 50th after that, so any future regression localizes itself in
COM9 without RTT JLink.
Validated on wiznet 192.168.1.143:
- Firefox: client.meshtastic.org full sync + idle poll stable (no
reset during the previously-crashing 'replay drain complete' phase)
- Chrome: 'Test Connection' accepts the cert prompt and connects
- Edge: same as Chrome
- openssl s_client default + tls1_2 forced: both negotiate TLS 1.2
with ECDHE-ECDSA + AES-GCM / CHACHA20-POLY1305, verify=18 (self-
signed, expected)
* chore(eth-tls): drop verbose debug logs from cert + TLS init paths
The cert pipeline + TLS context init had step-by-step LOG_INFOs and
ubiquitous Serial.flush() that were essential while diagnosing the
Phase 2.1-bis stack overflow, the Chrome handshake crash, and the
keep-alive watchdog reset. Once those bugs were fixed the logs just
clutter COM9 on every boot.
Kept on hand:
- cert: 'loaded from FS', 'generating ...', 'generated N B in T ms',
'persisted to LittleFS', plus all LOG_ERROR / LOG_WARN paths
- tls: 'server listening on TCP port 443', 'client connected from',
'handshake OK in N ms ciphersuite=', 'handshake failed -0xXXXX (...)',
plus all init LOG_ERRORs
Dropped:
- cert: 'step 1/8 pk_setup' through 'step 8/8 copy key DER', 'thread
woke', 'pipeline OK' (now silent on success)
- tls: 'cert is ready, initializing', 'parsing cert chain', 'parsing
key', 'ssl_config_defaults', 'conf_own_cert', 'ssl_setup',
'server worker scheduled', and the per-iter handshake trace
- obsolete 'Optional mbedtls debug bridge' commented-out stub
- all Serial.flush() that were added defensively for the
debug-the-crash phase
Bin shrinks ~40 KB (logs + format strings). Validated on wiznet
192.168.1.143: HTTP 200 round-trip works post-flash, no regression.
* fix(eth): harden API/TLS build guards (review #10573)
- ethApiHandlers.{h,cpp}: gate on (HAS_ETHERNET_API || HAS_ETHERNET_TLS_API)
so the shared handleApiClient/IStreamReadWrite still compile for an
HTTPS-only variant (the TLS server depends on them).
- ethTlsApiServer.{cpp,h}, ethCert.{cpp,h}: require ARCH_RP2040 (they use Pico
SDK get_rand_64()/watchdog_update()); the ethClient.cpp TLS include + call
site are tightened to match, so enabling the flag on a non-RP2040 Ethernet
target is a clean no-op instead of a cryptic build break.
- clang-format (16) the touched eth files to satisfy Trunk Check.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(eth): address review — listener/cert recovery + keep-alive framing
- Rebind HTTP/80 and HTTPS/443 after a W5500 chip reset. reconnectETH() now
tears the API/TLS servers down (deInitEthApiServer/deInitEthTlsApiServer) so
the restart path recreates them; the singleton guards previously left both
bound to dead sockets until reboot. The workers are kept (only the listener
is dropped) so nothing is deleted from another thread's runOnce.
- Stop the keep-alive loop after a handler error. /fromradio and /toradio
return whether the connection may stay open; a 400/405/408 response
(Connection: close) now ends the loop so unread body bytes can't be parsed
as the next request.
- Validate the cached cert/key before trusting it (parse both DERs), and clear
the IP commit-marker before rewriting the pair and write it last, so a reset
mid-persist regenerates instead of handing the TLS server a truncated or
mismatched pair (which would hard-disable HTTPS).
- Track a cert generation counter so the TLS server reloads and rebinds when a
DHCP lease change regenerates the cert for a new IP (the SAN must follow, or
browsers reject the new address). The cert worker is no longer one-shot.
- Silence the SCons F821/E402 lint on add_mbedtls_sources.py to match the other
extra_scripts.
Validated on a W5500 board: a forced chip reset rebinds 80 and 443 without an
MCU reboot; a truncated cached cert regenerates and HTTPS recovers; a simulated
lease change reissues the cert with the new IP in the SAN.
* fix(eth): clear cert readiness on regen failure + verify cached pair
Follow-up to the review:
- Reset ready_/certIp_ when ensureCertForIp() fails, so isReady() no longer
reports true with empty material — otherwise a later TLS reload fails
initTlsContext() and stays disabled instead of retrying on the next poll.
- certKeyParse() now also checks the cached cert and key form a matching pair
(mbedtls_pk_check_pair), rejecting an independently-parseable but mismatched
cert/key (e.g. if the IP commit-marker survived a failed clear).
Validated on a W5500 board: a valid cached pair still loads from FS, and a
regenerated cert reloads cleanly.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
Jonathan Bennett
|
fd8ba4fa4e |
Chop down tft-related loooong ifdefs chains (#10803)
* Chop down tft-related loooong ifdefs chains * Fix accidental sweep-up of portduino into screen #ifdef refactor |
||
|
webgeek1234andJonathan Bennett
|
9cef69a9d3 |
feat(gps): Do not start gps if lora region is unset (#10386)
* Disable gps thread on startup if lora region is unset There is little reason to waste battery on the gps if the data cannot yet be used. * fix goobered merge Refactor GPS enabling logic and remove duplicate code. * trunk --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> |
||
|
Ben MeadorsandAustin
|
0baf8b1db6 |
Portduino WASM hello world (still experimental) (#10793)
* Add ARCH_PORTDUINO_WASM build: meshtasticd in WebAssembly over WebUSB
Compile the full portduino firmware to WebAssembly (Emscripten) so a real node runs in a browser tab or headless Node, driving a LoRa radio over WebUSB through a CH341 — the desktop Ch341Hal path with its libusb backend swapped for a WebUSB one. The native/desktop portduino build is unchanged.
New build env under src/platform/portduino/wasm/ (excluded from the native build_src_filter): WebUSB libpinedio backend, config/FS/region/MAC/PhoneAPI glue, wasm setup/loop, JS WebUSB runtime, and build stubs. bin/build-portduino-wasm.sh runs a standalone cached emcc build to build/wasm/meshnode.{mjs,wasm}.
Six firmware sources gain #ifdef ARCH_PORTDUINO_WASM guards (single-threaded cooperative emscripten_sleep loop, continuous RX, US region default, std RNG, no-popen exec); none affect non-wasm builds.
* PortDuino WASM: CI build job, cross-platform libdeps, configurable adapter
bin/build-portduino-wasm.sh: auto-detect native-macos (macOS) vs native (Linux/CI) libdeps with a NATIVE_ENV override, and use the SAME env's Crypto with an XEdDSA-present guard. Drops the heltec-v3/Crypto borrow — the meshtastic/Crypto pin already ships XEdDSA; the native libdeps cache was just stale. No env pin change.
Add .github/workflows/build_portduino_wasm.yml: build the ARCH_PORTDUINO_WASM target in CI (ubuntu + emsdk, native libdeps) so it can't silently bit-rot; asserts build/wasm/meshnode.{mjs,wasm}.
src/platform/portduino/wasm: add wasm_set_lora_* setters so the JS host can configure any CH341 LoRa adapter (module, USB ids, DIO/TCXO, SPI speed, pins); wasm_config_apply falls back to the MeshToad defaults when unset.
* WASM: build as a first-class [env:wasm] via platform-wasm (retire emcc script)
Replace the standalone emcc build (bin/build-portduino-wasm.sh) with a normal
PlatformIO env, `pio run -e wasm`, using the new meshtastic/platform-wasm
platform (emcc/em++ + Asyncify, the WASM sibling of platform-native). The
portduino WebAssembly node is now built the same way as every other target.
- variants/native/portduino/platformio.ini: add [env:wasm] (platform pinned to
platform-wasm, board wasm). Translates the script's source set into a curated
build_src_filter, the ~30 EXCLUDE_* defines, and the lib set; defines
ARCH_PORTDUINO_WASM in-repo so correctness doesn't hinge on the platform's
board.json.
- extra_scripts/wasm_link_flags.py: the firmware-specific emcc *link* settings
(EXPORT_NAME, EXPORTED_RUNTIME_METHODS, EXPORTED_FUNCTIONS, ASYNCIFY_IMPORTS).
PlatformIO feeds build_flags to compile only, so these must ride LINKFLAGS;
without it the WebUSB Asyncify seam and the JS host's runtime methods are
dropped (the _wasm_* exports survive only via EMSCRIPTEN_KEEPALIVE).
- PortduinoGlue.{h,cpp}: guard the yaml-cpp dependency out of the WASM build
(#ifndef ARCH_PORTDUINO_WASM around the include, emit_yaml/loadConfig/
readGPIOFromYaml). The browser node configures via the wasm_set_lora_* setters
and dead-strips the YAML path; this drops the host yaml-cpp build dependency
entirely. Native is unchanged (guards are inert there).
- portduino_glue_wasm.cpp / portduino_main_wasm.cpp: repair EM_ASM JS that a
formatter had mangled (!== -> != =, regex split) in the prior landing; the
emcc link succeeds regardless, so CI now runs `node --check meshnode.mjs`.
- .github/workflows/build_portduino_wasm.yml: build via `pio run -e wasm`
(artifacts under .pio/build/wasm/), trigger on the shared inputs the env
inherits (root platformio.ini, bin/platformio-*.py).
- NodeDB.cpp: drop the dead ARCH_PORTDUINO_WASM region-default branch (region
now defaults the same as native).
- Crypto renovate pins: add the missing gitBranch so they track upstream.
Output: .pio/build/wasm/meshnode.{mjs,wasm} (ES module, factory createMeshNode).
Verified: pio run -e wasm (against the published platform archive), node --check,
module instantiates in Node with all exports; native-macos + Docker native unit
tests (450/450) still pass.
* Fix name on the Piggystick
* wasm: pin platform-wasm at the GPL-3.0-relicensed commit
platform-wasm's LICENSE was always GPLv3 (matching this firmware), but its
platform.json/README still declared Apache-2.0 (mis-copied from platform-native).
That's fixed upstream in b83fa5b; bump the [env:wasm] pin to it. Build output is
unchanged (license metadata only). Verified: pio run -e wasm against b83fa5b.
* wasm: make reboot() actually restart the node (was a no-op)
In wasm the reboot path is live (main.cpp -> Power::powerCommandsCheck ->
Power::reboot), but Power::reboot's ARCH_PORTDUINO arm tore down SPI/Wire/Serial
and then called the no-op ::reboot() stub — leaving the node running with a dead
radio until the tab was manually reloaded. Triggers include an admin/phone
reboot, factory reset, the "reconfigure failed" path, and the 60 s stuck-TX
hardware watchdog (RadioLibInterface).
- Power::reboot(): add an ARCH_PORTDUINO_WASM arm (before ARCH_PORTDUINO, since
the wasm build defines both) that skips the host teardown and just calls
::reboot(). notifyReboot already let modules persist.
- ::reboot() (glue): hand off to the JS host — browser reloads the tab (NodeDB
state survives via IDBFS, same identity returns); headless calls Module.onReboot
if provided, else logs. Loose !=/== so clang-format doesn't mangle the EM_ASM JS.
- README: document the reboot handoff + the Module.onReboot hook.
Verified: pio run -e wasm + node --check (EM_ASM intact); native-macos unaffected.
* wasm: rename env to native-wasm and run it in the main CI matrix
Rename [env:wasm] -> [env:native-wasm] for consistency with the portduino
native family (native, native-macos, native-tft). The build dir follows to
.pio/build/native-wasm/ (artifact is still meshnode.{mjs,wasm}); the PIOENV
guard in extra_scripts/wasm_link_flags.py, the README, and the companion wrapper
move with it. The board stays `wasm`.
Also wire the build into normal CI: build_portduino_wasm.yml becomes a reusable
workflow (workflow_call) invoked as the `build-wasm` job of main_matrix.yml, so
the WebAssembly node is built like every other platform instead of on a separate
path trigger.
* native-wasm: auto-locate the Emscripten SDK (pre-build script)
`pio run -e native-wasm` failed with "emcc not found" whenever it was invoked
from a shell that hadn't sourced emsdk_env.sh — a VS Code task, an IDE build
button, a bare terminal. Add a pre: extra script that probes the usual emsdk
locations ($EMSDK_ENV, $EMSDK, ~/emsdk, ./.emsdk, the sibling companion
checkout), sources emsdk_env.sh, and imports the resulting environment so the
platform builder and emcc see PATH/EMSDK/EM_CONFIG. No-op when emcc is already
reachable (CI), silent when no SDK is found (the platform emits its own error).
* wasm: address PR review feedback
- js/bridge.js: import CH341 from "./ch341.js" (sibling in this layout), not
"../src/ch341.js" which doesn't resolve here.
- js/ch341.js: a zero-length transferIn while MISO bytes are still outstanding
now throws instead of breaking out with a partially-filled buffer — silent SPI
corruption becomes a loud error, matching the comment above it.
- libpinedio_webusb.c: webusb_set_auto_cs honors the AUTO_CS option (? 1 : 0)
instead of the always-on ? 1 : 1. Runtime behavior is unchanged — Ch341Hal sets
AUTO_CS=0 right after pinedio_init (RadioLib drives the active-low NSS); the
option just isn't set yet at init, so this now correctly defaults off.
- SX126xInterface.cpp: the RX-start error log now names the method actually
called (startReceive vs startReceiveDutyCycleAuto) instead of hardcoding the
duty-cycle name in the WASM branch.
* native-wasm: drop the emsdk bootstrap shim (now in platform-wasm)
The Emscripten SDK auto-location moved into the platform-wasm builder, so the
firmware no longer needs its own pre: extra script. Remove
extra_scripts/wasm_emsdk_env.py and bump the platform pin to the build that
carries the bootstrap. The wasm_link_flags.py post script stays — those exported
fns / runtime methods / Asyncify import seam are firmware-app-specific.
* wasm: use the canonical companion name (meshtasticd-wasm-node)
The companion repo was renamed meshtastic-web-node -> meshtasticd-wasm-node; fix
the stale name in the wasm README and bump the platform pin to the build that
promotes the canonical name in its emsdk auto-location.
* wasm: re-entrancy guard for the API/region entry points + flaky-open retry
Two robustness fixes for the browser node:
- Re-entrancy guard. The node is single-threaded + Asyncify: while setup()/loop()
is suspended inside a WebUSB transfer, the JS event loop is free, so a stray
DOM/timer callback that re-enters a wasm_* entry point starts a second Asyncify
unwind ("async operation already in flight" abort) or clobbers shared PhoneAPI
state (observed as a "PhoneAPI::available unexpected state" flood). Add a
g_wasm_in_firmware flag set around setup()/loop() (portduino_main_wasm.cpp); the
wasm_set_region / wasm_api_to_radio / wasm_api_from_radio / wasm_api_available
entry points now reject a mid-tick call (return busy) instead of corrupting or
aborting. The host must still call them between ticks — this is the safety net
the design lacked, not a substitute for the JS queue.
- CH341 open retry (js/bridge.js). First-connect WebUSB is flaky — the interface
is briefly unclaimable right after the grant, or held by a prior session,
giving a transient "Could not open SPI: -1". Retry the open with a short
backoff, closing the device between attempts so claimInterface starts clean.
* wasm: exclude emscripten-only sources from cppcheck
The `check` board matrix runs `pio check` (cppcheck) over all of src/,
including src/platform/portduino/wasm/. cppcheck can't parse the EM_ASYNC_JS/
EM_JS macros (Syntax Error: AST broken at libpinedio_webusb.c:39,
internalAstError) and these sources are not part of any checked board build
([env:native-wasm] is board_level=extra, compiled by the build-wasm CI job).
Suppress the wasm dir in suppressions.txt, the same way generated/ and .pio/
are already excluded.
* wasm: coalesce FS.syncfs so two never run at once
IDBFS syncfs is async; the explicit wasm_fs_sync (5s timer + post-save +
beforeunload) could overlap a prior in-flight sync, warning "2 FS.syncfs
operations in flight at once". Serialize: if a sync is running, mark a pending
re-sync and let the in-flight one chain it on completion — at most one in flight,
trailing writes still flushed. (Companion drops IDBFS autoPersist so this is the
single persistence path.)
* wasm: silence false-positive SAST on the emscripten glue
- extra_scripts/wasm_link_flags.py: restore the trunk-ignore-all(ruff/F821,
flake8/F821) header every other SCons extra_script carries; Import/env are
SConscript-injected globals, so ruff/flake8 flag them as undefined.
- .semgrepignore: exclude src/platform/portduino/wasm/js/ (browser WebUSB glue,
not part of the firmware binary). The unsafe-formatstring rule false-positives
on its benign retry/diagnostic console logs.
* Update .github/workflows/build_portduino_wasm.yml
Co-authored-by: Austin <vidplace7@gmail.com>
---------
Co-authored-by: Austin <vidplace7@gmail.com>
|
||
|
Clive BlackledgeandBen Meadors
|
98fa4a67db |
[feature] Free a little memory used by bluetooth if wifi is enabled or bluetooth is disabled (#10398)
* esp32: release BTDM heap when Bluetooth inactive Release ESP-IDF BTDM memory after config load when Bluetooth is disabled or WiFi is enabled, recovering heap on ESP32 targets where BLE won’t be used for this boot. * Address BT memory release review comments --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Jonathan BennettandCopilot Autofix powered by AI
|
bbcc35e209 |
Stm32 general (#10700)
* Attempt to generalize ARCH_STM32 * Trunk * One More ARCH_STM32 * Whoops, one snuck in there * Fix comment to reflect define change Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> |
||
|
|
07a87a8254 |
security: runtime-toggleable MESHTASTIC_LOCKDOWN hardening for nRF52 (#10349)
* security: add MESHTASTIC_LOCKDOWN hardened build option
Meshtastic nodes ship with secrets on flash (channel PSKs, the device
private key, admin keys, wifi PSK) and over-the-wire access to admin
APIs that can re-key the mesh. Lose the device, at a border crossing,
in a raid, off a backpack, and an attacker reads everything in 30s
with a USB cable. There's no at-rest encryption, no client auth, the
screen leaks contents, and SWD is wide open. This adds an opt-in
hardened build for users who care.
-DMESHTASTIC_LOCKDOWN=1 on nRF52 (CC310) turns on:
DEBUG_MUTE silence USB/serial logs
MESHTASTIC_ENCRYPTED_STORAGE AES-128-CTR + HMAC-SHA256 on
LocalConfig / channels / NodeDB.
Passphrase-gated DEK, TTL/boot
unlock token, failed-attempt
backoff (within-boot, wall-clock,
persisted bootsSinceFail).
MESHTASTIC_PHONEAPI_ACCESS_CONTROL per-connection auth gate. Secrets
emitted as empty proto structs
to unauthenticated clients.
MESHTASTIC_ENABLE_APPROTECT one-way UICR APPROTECT, reset
applied same boot. Recoverable
only via \`nrfjprog --recover\`,
which also wipes the DEK.
LockdownDisplay screen shows "LOCKED" when locked
or idle 30s. OLED only; InkHUD /
niche / device-ui not yet wired.
Wire format is the LockdownAuth / LockdownStatus pair from
meshtastic/protobufs#911 (AdminMessage tag 104, FromRadio tag 18).
Access-control state is a file-scope 6-slot table in PhoneAPI.cpp
keyed by \`this\`, not class members. Adding *any* per-instance field
to PhoneAPI breaks USB-CDC enumeration on the current nRF52 Adafruit
framework, one volatile bool was enough. Out-of-line side-steps it.
lockdown_auth is handled synchronously in PhoneAPI::handleToRadioPacket
rather than routed through the mesh Router into AdminModule. Two
reasons: the passphrase never travels through a routed MeshPacket
queue, and per-connection authorization runs while \`this\` is still on
the call stack. The previous async-via-router design lost connection
identity (g_currentContext was null by the time AdminModule processed
the auth), so per-connection unlock never actually took effect on the
originating client.
Non-nRF52: #warning, only DEBUG_MUTE activates. tools/lockdown_provision.py
drives provision / unlock / lock-now / watch over USB.
Display privacy is a screen-lock latch separate from storage-lock
state: shouldRedactDisplay() is true when storage is locked OR the
latch is set. Screen::setOn(false) sets the latch when the stock idle
timeout powers the display off (reusing config.display.screen_on_secs,
no second timer); it is cleared only when a client authenticates with
the passphrase. A device idling on the mesh keeps routing but hides
its screen until re-auth; button input wakes the backlight to the
LOCKED frame, not content. The earlier lockdown-specific 30s idle
timer is removed — it duplicated PowerFSM idle detection and showed a
misleading LOCKED screen on a merely-idle device.
Unlock-token TTL fix: a token carrying both a boot-count and a
wall-clock TTL is no longer destroyed when the RTC is invalid at cold
boot. The boot count is independently verifiable without a clock, so
the token falls back to boot-count enforcement instead of being
deleted. A token is only hard-rejected when its wall-clock TTL can be
evaluated and is found expired.
NodeDB::reloadFromDisk() after unlock is deferred to the main loop via
lockdownReloadPending rather than run inline on the transport callback
stack — the reload is too heavy for the BLE/serial task stack and was
resetting the device immediately after a successful unlock.
The screen-lock latch also swallows local input events in
InputBroker::handleInputEvent while it (or storage-locked) is set.
Without that, a blind operator could drive on-device menus, fire
canned messages, or change settings through the joystick/buttons even
though the screen content was hidden. PowerFSM is still triggered
first so the backlight wakes to the LOCKED frame; the event is dropped
before reaching the UI observers.
The screen-lock latch is initialised to true at boot, so even a
token-auto-unlocked cold boot comes up redacted. Otherwise an attacker
holding a screen-locked device could power-cycle it (the RAM latch
resets) and recover a content screen. After any boot, the operator
must authenticate from a client to reveal screen content.
MyNodeInfo.device_id is also redacted for unauthenticated clients —
it is a stable hardware identifier useful to an attacker for
fingerprinting / correlating the device across observations. The
public mesh fields (my_node_num, owner short/long name, public key,
hw model) are left as-is because they are already broadcast on-mesh.
ModuleConfig.mqtt is also redacted for unauthenticated clients —
MQTTConfig carries broker username, password, server address, and
root_topic. The empty MQTTConfig is emitted via the same zero-init
pattern as the other gated sections.
Uptime-based session limit (MESHTASTIC_LOCKDOWN_SESSION_DEFAULT_SECONDS)
caps how long a single auto-unlocked session can hold storage open,
measured in firmware millis() since unlock. 0 = unlimited (existing
token-only behavior, suitable for tower/infra nodes); non-zero arms a
timer on every passphrase unlock and on every token-auto-unlock that
inherits the value, since the cap is persisted in the token (token
format bumped to v2: adds sessionMaxSeconds, body 56→60 bytes).
On expiry the device revokes per-connection auth, re-engages the
screen-lock latch, and reboots WITHOUT deleting the token. Next boot
auto-unlocks via the boot count (decrementing it) and arms a fresh
session window. Hard exposure ceiling: bootsRemaining * sessionMaxSeconds.
Explicit user Lock Now still deletes the token (passphrase required to
recover); only session expiry preserves it.
Why uptime, not wall-clock: getValidTime() is fed by GPS/RTC/client
time pushes — all manipulable by an attacker with the device (GPS
spoof to roll the clock back, pull the RTC backup cell, Faraday-cage
the whole thing). millis() comes off the Cortex-M's internal cycle
counter, sealed inside the chip; the only way to reset it is a reboot,
which costs a boot from the on-flash token counter. APPROTECT remains
the load-bearing defense against forging higher boot counts via SWD.
A future LockdownAuth.max_session_seconds proto field will let the
client set this per-token; until that lands the build-time
MESHTASTIC_LOCKDOWN_SESSION_DEFAULT_SECONDS macro is the only source.
Session expiry now decrements the on-flash boot count in place and
re-arms the uptime timer WITHOUT rebooting, while budget remains.
Mesh routing keeps running across session boundaries; the device only
reboots when bootsRemaining reaches zero (rollback budget exhausted),
at which point it hard-locks and forces passphrase re-entry.
Each session boundary still: revokes per-connection admin auth so
clients must re-authenticate to see content, re-engages the screen
lock latch, and emits LockdownStatus{LOCKED, needs_auth, boots=N}
so connected clients see the decremented count and know to re-auth.
Storage stays unlocked (DEK in RAM) for continuity.
The boot count's role as the rollback ledger is unchanged — it
decrements monotonically once per session boundary, whether the
session ends in a reboot or an in-place roll. Attacker who power-
cycles to dodge the session timer still pays a boot via the existing
readAndConsumeToken decrement-at-load path. APPROTECT remains the
only defense against forging higher counts.
Net effect for an unattended/tower node with bootsRemaining=50,
sessionSeconds=3600: 50 hours of continuous mesh service, one
reboot at the end, vs. the previous design's 50 reboots over the
same period. Same exposure ceiling, far better uptime.
LockdownAuth.max_session_seconds (proto tag 5) is now consumed: when
non-zero the client value wins; 0 falls back to the firmware-side
MESHTASTIC_LOCKDOWN_SESSION_DEFAULT_SECONDS, matching the boots_remaining
sentinel convention. Protobufs submodule pin bumped to develop tip
which contains meshtastic/protobufs#916 (merged).
* security: drop dead is_managed allowlist for set_config(security).private_key
The 'isLockdownSecurityCmd' allowlist in handleReceivedProtobuf dates
from the pre-LockdownAuth design when the passphrase was smuggled
through SecurityConfig.private_key. With lockdown_auth handled
synchronously in PhoneAPI::handleToRadioPacket before any admin message
reaches the Router, this allowlist now serves no legitimate purpose
and lets an unauthenticated local client mutate security settings on
a managed device by setting private_key.size>=1 — including
potentially disabling is_managed itself.
Remove the allowlist. Managed-mode local admin now requires a
PhoneAPI connection that has already authenticated via lockdown_auth
(or, on the pki_encrypted branch below, a valid PKC admin key).
Resolves Copilot review feedback on src/modules/AdminModule.cpp:105.
* security: protect lockdown-status drain slot from concurrent writers
g_pendingLockdownStatus / g_hasPendingLockdownStatus are written from
multiple call sites (PhoneAPI::handleLockdownAuthInline on the BLE/USB
transport callback, AdminModule on the Router thread, main loop session
expiry) and read in getFromRadio() on whichever transport is draining
FromRadio. The struct read/write was unprotected, so a writer could
corrupt the slot mid-encode. Same pattern as nodeInfoMutex — wrap
both the queue path and the drain in a small lock. Drain re-checks
the bool under the lock to handle the case where another reader
grabbed the slot first.
Resolves Copilot review feedback on src/mesh/PhoneAPI.cpp:1560.
* security: derive readAndDecrypt size cap from caller buffer, not a hardcoded 64 KB
The MAX_PROTO_FILE_SIZE = 65536 + OVERHEAD ceiling was an absolute
constant chosen against a since-outdated assumption that 'meshtastic
proto files are well under 64 KB'. On variants where MAX_NUM_NODES
pushes the serialised NodeDatabase past 64 KB the legitimate file gets
rejected at load and the device treats its own real config as corrupt.
The caller already knows the maximum plaintext it expects (outBufSize).
Cap the ciphertext at outBufSize + OVERHEAD instead — this is the tightest
sound bound (anything larger could not possibly decode into the caller's
buffer), still defends against OOM / integer overflow, and scales with
the platform's actual NodeDB size rather than an arbitrary constant.
Resolves Copilot review feedback on src/security/EncryptedStorage.cpp:1327.
* docs: fix stale 'passphrase delivery via AdminModule' references in configuration.h
The lockdown overview comment block was written when passphrase delivery
ran through AdminModule's handleReceivedProtobuf. With the synchronous
refactor that path now lives in PhoneAPI::handleLockdownAuthInline,
called before the admin message reaches the Router. Update both the
nRF52 feature list and the non-nRF52 degraded-mode rationale to point
at the current code path.
Resolves Copilot review feedback on src/configuration.h:578 (and :604).
* docs: refresh unlock-token format doc to match v2 layout
The header comment for the UTOK file still described v1 (version 0x01,
no session_max_seconds, 71 bytes) even after the in-flight bump to
TOKEN_VERSION=0x02 and TOKEN_TOTAL_SIZE=75. The inline body-size
breakdown comment was also wrong (claimed 39 bytes and mismatched the
real NONCE_SIZE/AES_KEY_SIZE constants). Rewrite both to match the
actual on-flash layout and note how v1 tokens are handled on upgrade
(rejected via the version byte; passphrase re-entry mints a v2).
Resolves Copilot review feedback on src/security/EncryptedStorage.h:50.
* docs: correct session-limit comment re: token-auto-unlock behavior
The s_sessionMaxMs comment block claimed 'token-auto-unlocked
sessions have no session timer (the session feature is a
passphrase-unlock-only knob)'. Stale: readAndConsumeToken() now
persists sessionMaxSeconds in the token file and re-calls
setSession() from the token-load path, so token-auto-unlocked
sessions DO inherit the same cap (and consumeSessionBoot() re-arms
in place between sessions on a single boot). Update the comment to
match.
Resolves Copilot review feedback on src/security/EncryptedStorage.cpp:72.
* docs: clarify input-swallow gate re: screen-lock latch vs storage state
The previous comment said input is swallowed 'until a client authenticates
and unlockScreen() clears the latch (or storage is unlocked)'. The
parenthetical was misleading: storage being unlocked is not in itself
enough to clear the latch — the latch persists across the
storage-unlocked-but-screen-locked steady state, and only an explicit
unlockScreen() (called from a successful passphrase auth path) clears
it. Reword so the only-passphrase-clears-the-latch invariant is
explicit and local input is named as something that does NOT clear it.
Resolves Copilot review feedback on src/input/InputBroker.cpp:134.
* docs: fix reloadFromDisk() trigger comment in NodeDB.h
The header still claimed reloadFromDisk() is called by AdminModule
after a successful passphrase op. With the synchronous PhoneAPI
refactor the actual trigger is PhoneAPI::handleLockdownAuthInline
setting lockdownReloadPending, with main.cpp's loop() dispatching
the heavy reload on the main thread (the transport callback stack
isn't large enough). Update the comment to point at the real path
and explain why the deferral exists.
Resolves Copilot review feedback on src/mesh/NodeDB.h:393.
* style: clang-format lockdown sources
Apply trunk clang-format (16.0.3) to satisfy the format check.
* style: black-format lockdown_provision.py
Satisfy the trunk black formatter check.
* security: drop unused v1 EncryptedStorage formats and migration
This storage layer has never shipped, so there are no v1 DEK files,
v1 unlock tokens, or v1 backoff records anywhere to stay compatible
with. Remove the dead compatibility machinery:
- legacy init() (FICR-only KEK, no passphrase) — had no callers
- deriveKEKv1() / loadDEKv1() and the v1->v2 DEK migration paths in
provisionPassphrase() and unlockWithPassphrase()
- the 5-byte v1 backoff file format
Also drop the now-pointless version byte from the on-disk MENC, MDEK,
and UTOK formats. Each is identified by its 4-byte magic (and, for the
keyed formats, its HMAC); with only one version that will ever exist,
the version field added nothing. Sizes shrink by one byte each
(overhead 54->53, DEK 66->65, token 75->74).
Rename the surviving helpers to drop the _v2 suffix (deriveKEK,
loadDEK, saveDEK, KEK_DOMAIN). No behavioral change for provisioning,
unlock, token consumption, or session handling.
Verified with an nRF52 lockdown build (rak4631).
* fix(lockdown): harden auth-table and lockdown_auth handler (audit)
Audit findings addressed:
C3 — `~PhoneAPI()` now clears its auth slot unconditionally. The previous
slot-clear in `close()` was gated on `state != STATE_SEND_NOTHING`, so a
PhoneAPI that never reached config (or that already closed) left
`slot.who` pointing at freed memory; a future PhoneAPI heap-allocated at
the same address would inherit the prior session's authorization through
`findOrAllocSlot`.
C4 — All access to `g_authSlots`, `g_authEpoch`, and `g_currentContext` is
now serialised through `g_authSlotsMutex`. Previously these were touched
without locking from BLE/USB/TCP/Router tasks, so two parallel slot scans
could hand out the same slot and mid-update reads could observe
authorized=true alongside a stale epoch. Granularity is fine — every
critical section is a short linear scan over six entries, and getFromRadio
(which calls `getAdminAuthorized()` per redaction check) tolerates the
brief blocking.
A4 / H1 — `lock_now` now requires the originating connection to be
already authorized. Previously any unauthenticated client (BLE/USB/TCP)
could submit `lockdown_auth { lock_now=true }` and force a reboot,
which was a trivial local-presence DoS — an attacker near the radio
could brick-loop it indefinitely. The original "panic button without
auth" property is dropped; panic now requires the operator to have
passphrase-unlocked the connection.
H2 — Empty-passphrase `lockdown_auth` (with `lock_now=false`) used to
silently return success. The client received no feedback distinguishing
that case from a real success, and an attacker could probe lockdown
state for free. Now emits UNLOCK_FAILED with no backoff increment
(empty-passphrase is more likely a client bug than an attack, but the
honest signal still lets the client correct itself).
H14 — `la.boots_remaining > 255` previously truncated silently
(256 → 0 → mapped to TOKEN_DEFAULT_BOOTS=50; 257 → 1). Honest clients
could not detect the misbehavior. Now rejected explicitly with
UNLOCK_FAILED.
L1 — The `to == nodeDB->getNodeNum()` allowance in the unauth ToRadio
gate now also requires `getNodeNum() != 0`. During the locked-default
boot path `getNodeNum()` returns 0, so a packet with `to=0` could
otherwise satisfy the equality and bypass the gate.
L2 — Comment added on `g_authEpoch` wrap. Practically unreachable
(2^32 lockNow events on one boot), but worth recording the behavior.
M17 — `findOrAllocSlot_LH` now evicts the first unauthorized stale slot
when the table is full of non-nullptr entries, rather than failing
closed. Authorized slots are never evicted — they represent live
operator sessions. Fail-closed (with LOG_WARN) only when every slot
holds a different live authorized PhoneAPI, which would require seven
simultaneous authed connections.
M18 — `s_screenLocked` is now `std::atomic<bool>` with relaxed ordering.
Plain bool happened to work on single-core Cortex-M4 today but breaks
silently if lockdown ports to ESP32 / RP2040, or under LTO whole-
program elision.
Verified with an nRF52 lockdown build (rak4631).
* fix(lockdown): gate every admin op on per-connection auth + storage unlock
Audit findings addressed:
H6 — Unauthenticated local clients could previously set_config / set_module_config /
set_channel etc. on a lockdown device whenever is_managed was unset.
The previous gate inside AdminModule's is_managed branch consulted
PhoneAPI::isLocalAdminAuthorized(), which reads a global g_currentContext
set during synchronous PhoneAPI dispatch — but AdminModule runs on the
Router task, by which time the dispatch task has exited and the global is
unrelated to the originating connection. The check was both broken (always
false on Router, so even authed clients were rejected) and unsafe (when it
did fire, the wrong connection could be authorized).
The fix relocates the gate to PhoneAPI::handleToRadioPacket, where dispatch
is synchronous and getAdminAuthorized() can be trusted. The admin payload
is already decoded there to extract lockdown_auth; extend the same branch
so that any non-lockdown_auth admin variant from an unauthorized connection
is dropped before ever reaching the Router queue.
H7 — Same root cause: get_config_request / get_module_config_request /
get_channel_request handlers returned full security/network/mqtt content
to unauthorized local clients. With the H6 gate in PhoneAPI, these
requests never reach AdminModule, so handleGetConfig / handleGetModuleConfig
/ handleGetChannel are only callable from authorized connections.
H9 — Remote admin (PKC-authorized peers, mesh-relayed admin) bypassed
lockdown entirely. If admin_keys were baked in via USERPREFS or set on a
prior unlocked boot, a remote attacker could drive factory_reset /
set_config against a locked device before the operator ever unlocked it.
Added an EncryptedStorage::isUnlocked() early-return at the top of
AdminModule::handleReceivedProtobuf. The local lockdown_auth path is
unaffected because PhoneAPI handles it synchronously before AdminModule
runs.
H10 — Removed g_currentContext, the ContextGuard, authorizeLocalAdmin(),
and isLocalAdminAuthorized() entirely. The audit's race (Router-thread
reads a pointer set by an unrelated parallel dispatch and authorizes the
wrong PhoneAPI) and the always-false-on-Router behavior both disappear
with the code that produced them. The PKC-admin auto-authorize path is
gone — PKC admin and the per-connection lockdown auth are now
independent: clients using PKC admin from a local app must also send
lockdown_auth to unlock the redacted FromRadio stream.
Cleaned up AdminModule's is_managed branch: under lockdown the
PhoneAPI-layer gate has already done its job, so no additional check
is needed; without lockdown the legacy is_managed-blocks-plain-admin
semantics are preserved.
Verified with an nRF52 lockdown build (rak4631).
* fix(lockdown): hold radio silent until storage is unlocked
Audit finding H8: while locked, the device beaconed nodeinfo and
telemetry on the public LongFast default PSK and routed incoming default-
channel packets through the locked router. The locked-default boot path
in NodeDB::loadFromDisk installs config via installDefaultConfig, which
honours USERPREFS_CONFIG_LORA_REGION (the common shape for managed
deployments) and synthesises the default LongFast channel. So a locked
device on managed firmware came up TX-enabled on a well-known PSK
before any operator interaction.
Force config.lora.region = UNSET in the locked-boot block.
RadioLibInterface gates both TX (startSend) and RX (readData) on
region != UNSET — locked devices no longer initialise the SX12xx for
either direction. Also set tx_enabled = false for any code path that
checks the flag directly without consulting region.
reloadFromDisk() restores the persisted lora config once the operator
unlocks. Note: until the audit's M8 (radio re-init after reload, the
upcoming commit 5 in this remediation series) lands, an unlocked
device may need to reboot before its radio fully comes up under the
real config; this is no worse than the pre-fix state, where the radio
was already running on the wrong (default) config and any real config
change required an explicit reconfigure or reboot anyway.
Verified with an nRF52 lockdown build (rak4631).
* fix(lockdown): per-connection status queue, redaction expansion, log/banner mute (audit)
M14 — Replaces the single file-scope LockdownStatus slot with a per-
PhoneAPI table keyed by PhoneAPI*, parallel to the auth-slot table and
sharing g_authSlotsMutex. Previously a status produced for connection
A (UNLOCKED with the active TTL, or UNLOCK_FAILED with a backoff)
could be drained by connection B before A read it, leaking A's auth
state to B. queueLockdownStatus is now a per-instance method writing
to this->slot. A new static broadcastLockdownStatus exists for the
main-loop session-expiry callers that have no PhoneAPI* in hand —
those want every connected client to learn about the session roll,
which is the only legitimate broadcast use case. hasPendingLockdownStatus
is a const helper for the FromRadio available()/drain check.
M13 — buildStatus_LH (the single point where lock_reason crosses into
the on-wire LockdownStatus) collapses any token_* reason to a generic
"locked" before emission. The specific reasons (token_hmac_fail,
token_wrong_size, token_bad_magic, token_boots_zero, token_expired,
token_dek_fail, token_missing) still go to local logs, but no longer
tell an unauthenticated client that the firmware noticed their
tampering / rollback / corrupt-file attempt.
M15 — Extended the STATE_SEND_MY_INFO redaction (previously device_id
only) to also wipe pio_env and min_app_version for unauth clients —
both are pure build-fingerprint vectors that tell an attacker which
known issues to probe. Kept my_node_num (broadcast on the mesh anyway)
and nodedb_count (clients need it post-unlock to decide whether to
pull the node DB). Added equivalent redaction for STATE_SEND_METADATA:
the whole DeviceMetadata struct is wiped for unauth clients
(firmware_version, device_state_version, hw_model, hw_model_string,
has_bluetooth/has_wifi/has_ethernet, role, position_flags,
excluded_modules). Clients re-fetch after authenticating.
M16 — LoRa config is now whitelisted for unauth clients to the set
that is intrinsically observable on the air anyway: region,
modem_preset, use_preset, channel_num, hop_limit. Operator-private
knobs (ignore_incoming, override_duty_cycle, override_frequency,
sx126x_rx_boosted_gain, tx_power, ignore_mqtt, fem_lna_mode,
config_ok_to_mqtt) are zeroed. The whitelist is built as a fresh
LoRaConfig stack copy rather than masked in place to avoid touching
the persisted struct.
M12 — Skip the DEBUG_MUTE "we are muted, FYI" banner under
MESHTASTIC_LOCKDOWN. The banner spilled APP_VERSION / APP_ENV /
APP_REPO over USB CDC even with all other logging suppressed, which
defeats the muting in lockdown builds and gives a USB-attached
attacker a free firmware-fingerprint primitive.
L9 — Removed the numeric backoff value from the LOG_WARN unlock-
failed message. The client receives backoff_seconds via the
UNLOCK_FAILED status; printing it again to USB serial under
non-DEBUG_MUTE builds (i.e. MESHTASTIC_LOCKDOWN_DEBUG dev builds)
was the only place it appeared in logs.
Verified with an nRF52 lockdown build (rak4631).
* fix(lockdown): atomic post-unlock reload with corruption surface (audit)
Closes M6, M7, M8, M9 from the lockdown security audit.
M6 — handleLockdownAuthInline no longer flips the connection to
authorized or emits UNLOCKED on the cold-unlock path (the first
successful passphrase verify after a locked boot). The client keeps
seeing LOCKED until reloadFromDisk has actually populated config /
channelFile / nodeDatabase with the operator's real values. Without
this, the window between the auth call and the main-loop reload
exposed two race-friendly bugs: (a) the client could read the
locked-default placeholders as if they were the real config, and (b)
a set_config in the window would silently overwrite a corrupted
baseline once the reload swapped values in.
A new per-status-slot bool pendingUnlockAfterReload records that the
connection is mid-unlock. The re-verify path (storage already
unlocked) is unchanged and authorizes immediately — there is nothing
to reload.
M7 — reloadFromDisk now holds a new file-scope mutex
(g_reloadFromDiskMutex) against itself, parks the radio in sleep
mode before swapping config / channelFile, and reconfigures the
radio with the now-real settings after. Other readers of config.lora
/ channelFile / nodeDatabase do not take this lock today; closing
those races is a wider locking-discipline change outside the audit's
M7 scope. The radio standby+reconfigure prevents the SX12xx from
sitting in a half-old/half-new register set across the swap, which
otherwise required a reboot to recover from.
M8 — RadioInterface::reconfigure() is now called at the end of a
successful reload, so the SX12xx register set actually reflects
the unlocked operator settings (region, modem preset, channels)
rather than staying on the locked-default placeholder. Routed through
a new Router::getRadioIface() accessor — the radio interface is
owned by Router as a unique_ptr and was not exposed.
M9 — NodeDB::loadProto now sets a NodeDB::storageCorruptThisLoad
flag whenever an encrypted file fails to decrypt or proto-decode.
reloadFromDisk consumes the flag and returns false on any failure
instead of silently falling back to defaults. main.cpp's reload
service then calls EncryptedStorage::lockNow() and
PhoneAPI::revokeAllAuth(), and the new
PhoneAPI::completePendingUnlocks(false) emits LOCKED(storage_corrupt)
to every pending connection — they stay unauthorized so any
set_config they send is dropped at the existing unauth gates.
The lock_reason string passes through buildStatus_LH's M13
redaction unchanged because it does not start with token_.
The success path goes through PhoneAPI::completePendingUnlocks(true)
which authorizes each pending connection, emits UNLOCKED with the
current TTL, and clears the screen-lock latch once. Snapshots the
target PhoneAPI* list outside the auth-table lock to avoid re-entry
when setAdminAuthorized takes the same lock.
Verified with an nRF52 lockdown build (rak4631).
* fix(lockdown): UI/pairing fixes for first-pair + content-flash + e-ink (audit)
Closes H13, M19, M20, L4 from the lockdown audit. (L3 dropped per
explicit decision — battery level is not a meaningful security side
channel.)
H13 — BLE pairing PIN was suppressed by the lockdown lock screen on
locked devices. Screen.cpp updateUiFrame's lockdown short-circuit
intercepts before ui->update() runs, so the pairing-PIN overlay
banner that NRF52Bluetooth::onPairingPasskey queued never painted.
Net effect: a freshly-locked device on first BLE pair could not be
unlocked over BLE because the operator could never see the PIN —
chicken and egg.
Adds a new notificationTypeEnum::pairing_pin value and special-cases
it in the short-circuit: paint the LOCKED frame first (so the
underlying background remains the redacted view, never dashboard
content) then let ui->update() composite the PIN banner overlay on
top. The PIN itself is an ephemeral pair-handshake artifact
(regenerated per attempt, dies on banner timeout) and is not
operator content, so this does not regress the redaction guarantee.
NRF52Bluetooth::onPairingPasskey switches from showSimpleBanner to
showOverlayBanner with notificationType = pairing_pin so the
short-circuit's lookup matches.
M19 — Brief content-visible window on Screen::handleSetOn(true)
wake. OLED GDDRAM physically retains the last-rendered frame while
the panel is powered off; the next ui->update() after displayOn() is
async, so an observer (or shoulder-surfer) could see the previous
frame's content for 16-50 ms on every wake. Under MESHTASTIC_LOCKDOWN
we now paint the LOCKED frame into GDDRAM in handleSetOn(false)
before calling displayOff(). On wake the only thing the panel can
flash is the redacted view. Gated on lockdown only — non-lockdown
builds keep the previous frame as a UX cue.
M20 — E-ink panels physically retain the last-rendered image
without power. A power-cycled lockdown handheld kept showing
operator-identifying content (position, messages, nodeinfo) until
the firmware's first natural refresh — which on e-ink can be
seconds into boot. Now, under MESHTASTIC_LOCKDOWN && USE_EINK, the
panel init path in Screen::setup() paints the LOCKED frame and
forces a full refresh (forceDisplay) immediately after ui->init()
and before any other rendering. Persistent pixels are wiped to the
redacted view before an observer can see them. Build-tested on
seeed_wio_tracker_L1_eink; hardware-verified visual confirmation
is pending a T-Echo session.
L4 — Screen::blink() bypasses the normal ui->update() path that
the lockdown short-circuit gates. It draws arbitrary geometry, not
node data, so it does not actually leak today; but any future
change that puts content into blink would silently leak past
redaction. Added an early-return on shouldRedactDisplay() to make
the function honor the redaction contract.
Verified with nRF52 lockdown builds on both rak4631 (OLED) and
seeed_wio_tracker_L1_eink (e-ink).
* fix(lockdown): refuse APPROTECT on vulnerable silicon, gate on provision (audit)
Closes M22 and M23 from the lockdown audit.
M22 — APPROTECT lockout on nRF52840 is publicly known to be bypassable
on every silicon revision shipping in current Meshtastic hardware
(AAB0..AAF0) via SWD glitching, per LimitedResults' published research
on the nRF52 series. Engaging APPROTECT on these revisions has two
bad properties: (1) the lockout is irreversible without a destructive
nrfjprog --recover, and (2) it gives the operator a false sense of
security because the lockout itself can be defeated by anyone with
ten minutes and a glitcher.
enableAPProtect() now reads FICR.INFO.VARIANT (encoded as a 4-byte
ASCII word) and refuses to engage on any known-vulnerable revision,
logging the variant so the operator knows their device's specific
build code. To override (e.g. for end-to-end testing of the engage
path on hardware that's known affected), rebuild with
-DMESHTASTIC_APPROTECT_OVERRIDE_VULNERABLE_SILICON=1.
The vulnerable list is explicit and easy to update: any future
revision shown to be fixed can be removed from the list and APPROTECT
will engage on it as before.
M23 — APPROTECT engagement moved from very early in setup() to
after fsInit() + EncryptedStorage::initLocked(), and gated on
EncryptedStorage::isProvisioned(). A misconfigured CI build of a
lockdown variant flashed to a dev board would otherwise burn SWD on
first boot before the operator had set any passphrase, taking the
board out of the development/recovery workflow with zero real
security benefit (there is no DEK to protect on an unprovisioned
device). Engagement now follows operator intent: SWD locks only
once they've committed to lockdown via passphrase provisioning.
The SWD-attachable window between boot and APPROTECT engagement
widens slightly from this reorder (now ~hundreds of ms while fsInit
runs) but APPROTECT remains effective on the only payload it could
protect (the in-RAM DEK loaded by initLocked which now runs *after*
APPROTECT for already-provisioned devices).
Verified with an nRF52 lockdown build (rak4631).
* tools: harden lockdown_provision.py (audit)
Closes M26-M30 and addresses L7.
M26 — passphrase input. --passphrase on argv now requires
--insecure-passphrase-on-cmdline as an explicit acknowledgement;
without it the tool refuses and points at --passphrase-file or the
interactive prompt. --passphrase-file refuses to read anything that
isn't mode 0600 (so a passphrase another user can read off the
filesystem doesn't silently succeed). With neither, the tool reads
the passphrase via getpass.getpass — and on 'provision' double-prompts
with a confirm.
M27 — provision now requires an explicit 'yes' confirmation unless
--yes is passed, after printing the warning that the passphrase
cannot be recovered. The double-passphrase prompt is built into
gather_passphrase(confirm=True). Reduces the chance of a typo
binding a device to an unrecoverable passphrase.
M28 — 'lock' subcommand gains a 'lock-now' alias, matching how the
audit and wire docs refer to it everywhere. Both forms now require
'yes' confirmation unless --yes is set, so an accidental command
doesn't immediately reboot the device into a locked state.
M29 — the 4-second sleep is gone. Replaced with a StatusFuture
single-shot that the FromRadio interceptor signals when the next
LockdownStatus arrives. provision/unlock/lock wait up to --wait
seconds (default 8) for the actual reply and exit non-zero with the
device's reason on UNLOCK_FAILED, surfacing backoff_seconds in the
error line. Exit codes are now meaningful:
0 = UNLOCKED
1 = no status / unexpected
2 = NEEDS_PROVISION (or a precondition fault: missing pkg, bad args)
3 = LOCKED (ambiguous: device reported locked rather than the
expected unlocked result)
4 = UNLOCK_FAILED
This lets ops scripts decide what to do without parsing stdout.
M30 — top-of-file docstring gained an explicit SECURITY MODEL block
that names the threat model (USB-only, passphrase cleartext on the
cable) and forbids extension to TCP/BLE/UDP without a redesign. A
runtime banner reprints the headline on every invocation. --port
values starting with tcp:/tcp://, ble:/ble://, udp:/udp://, ws:/wss:
are rejected at argument parse before any connection attempt; a
copy-paste of an example into a context with a different --port
cannot silently leak credentials to the wire.
L7 — private meshtastic APIs (_handleFromRadio, _sendToRadio,
_generatePacketId) are still in use because the lib does not yet
dispatch LockdownStatus on a public pubsub topic and there is no
public seam for raw ToRadio. Their use is now wrapped in
getattr-with-clear-error so a future lib version that removes them
produces an actionable error instead of an obscure traceback. The
top-of-file note explains why we're on the private surface.
Verified end-to-end on hardware (R1-Neo + Seeed Wio Tracker L1)
during the audit-remediation hardware test pass:
- provision (interactive, with confirm and double-prompt)
- unlock (success returns UNLOCKED + boots TTL)
- watch (passive listener emits LockdownStatus events)
- lock-now (with --yes)
* fix(lockdown): H13 — render pairing PIN steady over LOCKED frame
Two bugs in the H13 fix from commit
|
||
|
HarukiToreda
|
5154e81d0b |
Unify InkHUD message storage with BaseUI's MessageStore (#10596)
* Unified Messagestore. * DM fix * Copilot fixes |
||
|
|
60303968bb |
Add Heltec mesh node t1 (#10416)
* add heltec-mesh-node-t1 * fixed low power * Update the sensor enumeration values. Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Fix memory leak in ICM42607PSensor * fix ST7735_MISO error --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> |
||
|
Thomas Göttgens
|
1747e2d8e5 | T-Echo-Card support (#10267) | ||
|
|
4a1ff18f57 |
feat: add Nordic nRF54L15-DK variant (Zephyr + BLE + LoRa) (#10193)
* feat: add Nordic nRF54L15-DK variant (Zephyr + BLE + LoRa)
Adds a community hardware variant for the Nordic nRF54L15-DK (PCA10156)
with an external EBYTE E22-900M30S (SX1262) LoRa module. First Meshtastic
port running on the Zephyr RTOS; all other Nordic targets use the nRF5
SoftDevice stack.
Scope
-----
- New Zephyr-based platform layer under src/platform/nrf54l15/ providing
Arduino-compatible shims (Arduino.h, SPI, Wire, Print, Stream) over the
Zephyr APIs plus a LittleFS-backed InternalFileSystem on SPIM20.
- Bluetooth LE peripheral (NRF54L15Bluetooth.*) built on the Zephyr BT
host stack, exposing the Meshtastic GATT service with legacy
connectable advertising, just-works pairing, dynamic MTU exchange
(up to 247 bytes), and iOS connection-parameter tweaks.
- Variant directory variants/nrf54l15/nrf54l15dk/ with pin map for the
E22 module on connector J1, PlatformIO env (nrf54l15dk), Zephyr
DT overlay and a wiring README.
- Zephyr project config (zephyr/prj.conf + board overlay) tuned for
BT + LoRa: 16 KB main stack, 4 KB BT RX thread, RTT logging in
immediate mode, newlib-nano heap sized to leave room for the GATT
pools while still allowing ATT MTU=247.
- extra_scripts/nrf54l15_linker.py works around a PlatformIO + old Ninja
issue where Zephyr's two-pass linker script generation does not run
automatically; the post-script parses build.ninja and invokes the
gcc -E step directly before the final link.
- boards/nrf54l15dk.json board definition (PlatformIO needs it for the
DK; the Seeed platform only ships the XIAO variants).
- variants/rp2350/rp2350.ini excludes platform/nrf54l15/ from RP2350
build_src_filter so the shared platform tree does not leak between
targets.
- .gitignore: add nRF J-Link / RTT debug artifacts (flash.jlink,
rtt_*.txt).
Shared source changes
---------------------
- src/main.{cpp,h}, src/RedirectablePrint.cpp, src/FSCommon.{cpp,h},
src/mesh/{Channels,NodeDB,RadioLibInterface,MeshService,PhoneAPI}.cpp,
src/mesh/RadioLibInterface.h, src/modules/AdminModule.cpp: add small
guards / helpers so the Zephyr build compiles alongside the Arduino
targets. Behavior on existing boards is unchanged.
Hardware model
--------------
HW_VENDOR maps to meshtastic_HardwareModel_PRIVATE_HW until a dedicated
protobuf enum value is assigned upstream. The variant declares
custom_meshtastic_hw_model = 132 so the maintainers can wire the new
enum value through the protobufs repo after merge.
Hardware note
-------------
The E22-900M30S does not connect its DIO2 pin to TXEN internally — a
wire/solder bridge between DIO2 and TXEN on the module is required for
TX to work. Details and full pin map are in the variant README.
Validation
----------
Built clean against develop. On real hardware (April 2026) the port
passes end-to-end: iOS companion app pairs and connects, configuration
round-trip works, LoRa TX/RX reaches a canonical tbeam on the same mesh
channel, NodeDB updates propagate both ways, and traceroute completes.
* fix(nrf54l15): use atomic fs_rename instead of copy fallback
Zephyr LittleFS on nrf54l15 supports fs_rename natively, so route it
through the same atomic path as ESP32. The previous copyFile+remove
fallback truncated the destination before copying, leaving 0-byte files
if interrupted mid-write.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(nrf54l15): expand storage_partition from 36KB to 700KB
LittleFS on the default 9-block (36KB) storage_partition ran out of
space during copy-on-write of config.proto, causing fs_write to return
ENOSPC and pb_encode to surface "io error" when saving configuration
via the mobile app.
Reclaim slot1_partition (the MCUboot secondary slot — unused since we
flash directly via J-Link) and grow storage_partition to span
0xb6000..0x165000 (~175 blocks).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(nrf54l15): drop USERPREFS_LORACONFIG_* so LoRa config stays mutable
NodeDB rewrites LoRa config from USERPREFS_LORACONFIG_* on every boot,
which prevented reconfiguration via the BLE/serial app. Drop the
variant-level defaults; users configure region and modem preset through
the app like every other variant.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(nrf54l15): enforce MITM passkey pairing on GATT service
- Add MESH_PERM_READ/MESH_PERM_WRITE macros (READ_AUTHEN/WRITE_AUTHEN)
on all mesh service characteristics so clients must complete passkey
exchange before accessing fromNum/fromRadio/toRadio/logRadio.
- Wire FIXED_PIN mode to bt_passkey_set() so the device advertises a
known PIN (config.bluetooth.fixed_pin); RANDOM_PIN keeps default
per-pairing random passkey.
- Reduce BleDeferredThread HARD_WATCHDOG_MS from 3min to 1min.
- prj.conf: CONFIG_BT_SMP_ENFORCE_MITM=y, CONFIG_BT_FIXED_PASSKEY=y,
CONFIG_BT_SMP_SC_PAIR_ONLY=n (legacy fallback for clients that abort
SC pairing with reason 0x01 within 150ms).
* fix(nrf54l15): resolve develop-merge conflict + cppcheck warnings
The `Merge branch 'develop'` left two ~RadioLibInterface() declarations
in src/mesh/RadioLibInterface.h: the inline version added upstream by
PR #10254 (which independently applied the same UAF guard this PR was
carrying) and the out-of-line version this PR introduced. GCC rejects
the duplicate, breaking every platform build. Drop the out-of-line
declaration + definition; keep upstream's inline form.
Also silence the 13 cppcheck low warnings introduced by the new
nrf54l15 Arduino shim — Arduino's `String`/`SPISettings` API contract
relies on implicit single-arg constructors used pervasively by
existing Meshtastic code, so suppress `noExplicitConstructor` inline
with a comment instead of breaking the API. The few mechanical wins
(`const tmp[2]`, `const uint32_t *sp`) are applied directly.
* fmt: fix Trunk Check lint issues on nrf54l15-port
- extra_scripts/nrf54l15_linker.py: move regular imports above
Import("env") to silence E402, add trunk-ignore-all(F821) for the
PIO/SCons SConstruct injection (matches esp32_pre.py / nrf52_extra.py
convention)
- src/platform/nrf54l15/NRF54L15Bluetooth.cpp: clang-format 16.0.3
- boards/nrf54l15dk.json + variants/nrf54l15/nrf54l15dk/README.md:
prettier 3.8.3 (also resolves markdownlint MD060 on README tables)
No behavior change.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(nrf54l15): address Copilot review comments + correct clang-format style
Six review threads from the 2026-04-30 Copilot review:
- src/platform/nrf54l15/nrf54l15_main.cpp: validate PSP against the nRF54L15
SRAM range (0x20000000..0x20040000) and 4-byte alignment before walking the
faulting thread's stack, and clamp the walk so it never reads past the end
of RAM. Prevents a second fault inside the fatal handler when PSP is
corrupted (common in real faults).
- src/platform/nrf54l15/nrf54l15_arduino.cpp: gate the bring-up printk traces
in digitalWrite/digitalRead (CS/NRESET toggle log, BUSY-before-NRESET
snapshot, BUSY periodic timeline) behind a new -DNRF54L15_GPIO_DEBUG flag
that is off by default. The "dev NOT READY" message stays unconditional —
it indicates a genuine hardware/DTS misconfig.
- src/modules/AdminModule.cpp: don't mutate config.device.output_gpio_enabled
from handleGetConfig(). Reflect the live pin state in the response payload
only — a getter must not write back to disk-persisted state.
- src/platform/nrf54l15/InternalFileSystem.h: derive totalBytes() from
FIXED_PARTITION_SIZE(storage_partition) at compile time so it tracks the
DK overlay's ~700 KB partition instead of the stale 36 KB hard-coded value.
Updated the file header comment accordingly.
- extra_scripts/nrf54l15_linker.py: make _extract_gcc_command() handle the
POSIX Ninja COMMAND format (no `cmd.exe /C "..."` wrapper) in addition to
the Windows form, so the script doesn't hard-fail on Linux/macOS hosts.
- src/platform/nrf54l15/NRF54L15Bluetooth.cpp: clamp NO_PIN to RANDOM_PIN
with a one-shot LOG_WARN. The mesh GATT permissions are declared with
BT_GATT_PERM_*_AUTHEN and prj.conf sets CONFIG_BT_SMP_ENFORCE_MITM=y, so
NO_PIN with no auth callbacks would leave every characteristic returning
BT_ATT_ERR_AUTHENTICATION. Falling back to RANDOM_PIN keeps the link
usable instead of silently broken. Also re-formatted this file with the
project's .trunk/configs/.clang-format (Linux braces, 4-space indent,
130-col) — the previous lint-fix commit
|
||
|
Ben Meadors
|
29a61dc75c | Fix type declaration for ambientLightingThread and correct uint32_t usage in PacketHistory | ||
|
|
8e99ffbe7e |
ThinkNode M7 (#8077)
* ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * rename variant and add guard macros * older G3 operational. M7 next. * Split out G3 and M7 to different variants. Completely new PCB design. The G3 stays on 'PRIVATE_HW' * Define button behaviour and use all of the device flash --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> |
||
|
BJK
|
fefd424901 |
Fix screen geometry update for SH1107 display (#10444)
Added conditional block to update screen geometry for SH1107 128x128. |
||
|
Jonathan Bennett
|
92c0133ef9 | Finish evil merge cleanup (#10253) | ||
|
Ben Meadors
|
6171ad8c14 |
Remove duplicate GPIO init block in setup() from bad merge in PR #9378
The T-Deck-Pro V1.1 PR (#9378) had a backwards merge ( |
||
|
Ben Meadors
|
8fd0a7f283 | Merge branch 'master' into master | ||
|
Ben MeadorsandCopilot
|
9e26cc3795 |
Update src/main.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |
||
|
lewisxhe
|
d31d0f85fe | Added compatibility with LilyGo T-Deck-Pro V1.1 | ||
|
Ben MeadorsandCopilot
|
d5af07e458 |
Update src/main.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |
||
|
Ben Meadors
|
e7b66281fa | Merge branch 'master' into master |