42 Commits

Include renames

Author	SHA1	Message	Date
Tom	bca7c0b480	Tom fiddles with the test suite - again (#11517) ... * test: make every suite run its own binary, and fail the run when it does not PlatformIO links every native test program to the one $BUILD_DIR/$PROGNAME path and attributes Unity output by text alone, never checking that the source file a case came from belongs to the suite it thinks it ran. Both harnesses had been split into a build pass (--without-testing) and a run pass (--without-building), and for a non-embedded platform the run pass never relinks - so all 57 suites executed whichever suite was linked last, each reporting PASSED under its own name. Introduced for CI in 4906f8a6 and for bin/run-tests.sh in de6b2319; both ran fused, and correctly, before that. Drop --without-building from both run passes. The --without-testing pass stays as a warm-up so no single suite absorbs the whole src compile in its reported duration; with the objects already cached the per-suite step is one test_main.cpp plus a link. Add bin/check-test-attribution.py, which grades the JUnit reports both harnesses already produce. It fails on a test case whose source file lies outside the suite that reported it, and on a suite that was asked to run and produced no cases at all. Wired in three places: bin/run-tests.sh as a RED verdict ahead of the softer ones, per area in CI so a mismatch names its area, and once over the merged report so an area that never executed cannot hide. Suite ownership is matched on whole path segments, so test_mesh does not claim test_mesh_module, and the -f pattern is resolved against the canonical set rather than taken as a literal suite name. * fix(test): pin simradio off for the packet-signing PKI cases [env:coverage] passes -s to the test binary (74e6723ad, #8251), which sets portduino_config.force_simradio. wouldEncryptWithPKC() lists !force_simradio among its preconditions, so perhapsEncode() takes the channel-crypto branch, returns NONE and leaves pki_encrypted false - failing test_B11_normal_unicast_still_uses_pki and test_B12_licensed_receiver_does_not_decrypt_pki, both of which assert the production PKI path. [env:native] passes no such flag, which is the whole of the long-standing "passes under native, fails under coverage" split; it was never gcov, ASan or a host. Save and clear the flag in setUp, restore it in tearDown, so the suite asserts the encode path it is named for under either env's invocation. Same binary, pristine $HOME: 77 tests 0 failures with -s and without, where before -s gave 2 failures. Whether the unit-test binary should run with -s at all is a separate question - it means CI exercises the simradio configuration for every suite - and is left alone here. * fix(router): drive the admin-key fallback budget from the injectable clock The budget is 8 tokens refilling one per 250ms of wall clock, and test_admin_key_fallback_is_rate_limited drains it with eight PKI decodes before asserting the ninth is refused. That gives the drain loop 31ms per iteration, each of which generates a keypair and does three X25519 operations under gcov and ASan. This box runs them in ~4ms; a GitHub runner takes ~38ms, so a token refills mid-drain and the packet the test expects to be blocked decodes. Measured from both runs' own log timestamps, 9.5x apart. Read the bucket through Time::getMillis() instead of millis(), and have the test set and advance the virtual clock rather than sleeping. The subtraction was already wrap-correct, so the deadline guard is unaffected. Restores the clock in tearDown so the rest of the suite is untouched, and drops ~3s of real sleeping from the run. * test: declare the event-channel suites' shared state Both construct a NodeDB, whose constructor persists a default set into an empty prefs directory, so each writes the five prefs protos. Neither was declared, because until suites started running their own binaries nothing had ever observed them writing anything. * test: add a repeat runner for order-independent flakes A single green run says nothing about a real-time race or a slow-host margin: the rate-limit budget above passes here with 7x headroom and still fails on a CI runner. Run one suite N times against a fresh scratch $HOME each time, optionally against CPU contention, and print a flake rate. Failing runs keep their log and their sandbox; passing runs leave nothing. Simradio is taken from the env's own test_testing_command, so a stress run reproduces the real invocation rather than inventing a third one. * fix(test): keep a native test run off the host's radio bin/pio-test-isolate.sh sandboxes $HOME, but portduinoSetup() looks for config in ./config.yaml and /etc/meshtasticd/config.yaml - the second absolute, so no $HOME sandbox can hide it. On a machine running meshtasticd that config selects the real LoRa module and the run continues into GPIO and SPI setup, so ./bin/run-tests.sh -e native would drive the developer's own radio without saying so. -e native is also the faster of the two, and the one reached for when iterating. [env:coverage] already passes -s, which short-circuits ahead of the config search and returns before hardware init. Pass it for [env:native] too. That closes the hazard and, incidentally, makes the two envs invoke the binary identically - they did not, which is the whole of the long-standing "green locally, red in CI" split. * test: run every suite with PKC on, and assert it stays that way force_simradio does two unrelated jobs. It keeps portduinoSetup() off the host's hardware, which every test run wants, and it makes wouldEncryptWithPKC() return false, which no test run wants: the encode path under test then falls back to channel crypto and any case asserting PKI fails, or worse, passes while asserting the wrong thing. Three suites had each worked this out separately and cleared the flag themselves - test_admin_session_repro's comment describes the mechanism exactly. Clear it once in initializeTestEnvironment() instead. By then portduinoSetup() has already skipped the config search and chosen the simulated radio, and it never reconsults the flag, so clearing it cannot bring hardware back; the only remaining readers are the PKC gate and an exit_simulator intercept no test can reach. The per-suite copy added to test_packet_signing for B11/B12 goes away with it. Two asserts, because both invariants were true only by inspection: - No listening sockets. main.cpp's setup()/loop() are compiled out under PIO_UNIT_TESTING, so the phone API, MQTT and the web server never start - but nothing checked. A suite that pulled in a service binding a port would open one on the developer's machine for the length of the run. - force_simradio still clear, before every test rather than once per suite, since a case that restores a struct it snapshotted earlier puts it back and silently disables PKC for everything after it. Named per test, so the report points at the case after the culprit. Both exit rather than TEST_FAIL: they run outside a Unity test frame, and silently repairing either one would leave the suite that broke it passing. Verified by disabling the clear and watching the guard fire on the first case instead of reporting two quiet failures. * test: let the repeat runner vary suite order too Repeating one binary finds races and slow-host margins; it cannot find state that leaks from one suite into the next, because only one suite runs. --shuffle drives run-tests.sh --seed with a fresh seed each iteration and reports which seeds went red, so the shuffle already in the harness yields a flake rate rather than a single sample. Seeds are printed and replayable. * fix(test): baseline the environment from whichever runs first Clearing force_simradio in initializeTestEnvironment() missed the suites that never call it. test_atak is one, and it also pulls in TestUtil.h, so it got the per-test assert without ever getting the baseline and aborted on its first case - caught by CI, which is what the assert is for. test_geocoord_distance, test_meshpacket_serializer and test_utf8 skip the init too, but include no TestUtil.h at all, so nothing reached them either way. Move the clear and the socket check into baselineEnvironment(), called from initializeTestEnvironment() or from the first RUN_TEST, whichever comes first. Suites that initialise are still asserted from their first case; the rest are baselined at case one and asserted from case two. Print the violation on stdout as well as stderr: bin/run-tests.sh filters the program's stderr, so locally the message vanished and the run reported "exit-time abort (likely sanitizer)" - the exit code read as a signal number again, with no sign of the real reason. * test: drop the per-suite simradio exceptions Three suites had each found that force_simradio disables PKC and cleared it themselves. initializeTestEnvironment() now clears it once for every suite, so all six sites are dead code - along with the PortduinoGlue.h include each pulled in for it. test_event_channel_router's is the one worth removing rather than leaving: it snapshotted the flag into SavedGlobals and restored it at teardown, which is exactly the shape the per-test assert exists to catch. Harmless while the snapshot reads false, and a silent PKC-off for every later case if that ever changed. The three suites pass unchanged: 54 cases, attribution clean. * test: tell a deliberate harness abort from a sanitizer fault A guard in TestUtil.cpp that aborts on purpose - a listening socket, or force_simradio put back - exits non-zero with no sanitizer report, so it fell through to the exit-time-abort heuristic and was announced as "RED exit-time abort (tests passed; likely sanitizer)". That is the same trap as the phantom SIGILL two checks above: a verdict line naming a cause it has not established, sending the reader after a memory bug that does not exist. It cost hours in the original investigation and it cost the first read of a test_atak failure today. Match the FATAL line the guards print on stdout for exactly this purpose, and report the reason they gave instead of guessing. * test: say why three suites omit TestUtil.h They are pure-function - no NodeDB, no router, no sockets, no PKC - so the harness-wide guards in TestUtil.h would assert conditions they cannot reach, and initializeTestEnvironment()'s RTC and OSThread setup would pull in portduino globals they otherwise never touch. Suite-level state cleanliness still applies: bin/pio-test-isolate.sh fingerprints the sandbox from outside and wraps every suite regardless. Recorded at the top of each so the omission reads as a decision rather than an oversight - it looked like the latter when the socket and simradio asserts landed. * test(traffic): give every case a primary channel resetTrafficConfig() zeroed channelFile and left channels_count at 0, so the 66 cases that do not install a channel themselves ran against a device with none. Every router lookup then hit Channels::getByIndex()'s out-of-range branch and logged, which is 12106 of the suite's 20088 ERROR lines and tests nothing - a real device always has a primary channel, and no case here asserts channels-unset behaviour. Install the well-known primary the suite already builds for its precision cases. All 85 pass unchanged, and the suite's ERROR output drops to 7985, the remainder being decode failures from test_tm_fuzz_nodenum_blitz's malformed payloads. * test: budget each suite's LOG_ERROR output A suite can pass while emitting six figures of ERROR, which buries a real failure and trains everyone to skim. Count them per suite and grade the count as a second axis, alongside the CLEAN/DIRTY verdict already computed from the same captured log. Declared in the same manifest, as a RANGE rather than a ceiling, because for a fuzz suite the floor is the half that matters: test_fuzz_decode logging ~100k rejections is the suite working, and the same suite logging none means it stopped feeding malformed input while every case still passes. Bounds are wide on purpose - they catch a path that has stopped running, not a drift of a few hundred lines. Undeclared suites get 100, which 50 of 57 already meet. AMBER, not RED. Three log sites - mesh-pb-constants.cpp:28, Channels.cpp:356, MQTT.cpp:92 - account for nearly all the remaining volume, and landing this red before they are demoted would buy exemptions rather than fixes. * test: canary the attribution check, and run the state self-test in CI check-test-attribution.py guards against the false green, and nothing guarded the guard. A checker that has quietly stopped matching looks exactly like a codebase with no problem, which is how the original went unnoticed for three weeks of green runs. The canary reproduces the failure deliberately - two suites run with --without-building, so PlatformIO does not relink and both execute the same leftover binary - and requires the checker to catch it. It also fails if the reproduction stops reproducing: if PlatformIO ever relinks per suite under that flag, the reason both harnesses stopped passing it no longer holds, and the harness should be revisited rather than left on a stale assumption. bin/test-state-check.sh already existed with fixtures asserting CLEAN/CLEAN/DIRTY/MISSING and had never run in CI. Wire it in too - the shared-state checker had the same blind spot, and somebody had already written the test for it. * fix(ci): run the attribution canary where it cannot clobber the daemon The canary relinks $BUILD_DIR/$PROGNAME, and in simulator-tests that replaced the daemon binary with a test suite. The integration test then started it and waited for a listening socket, which a test binary never opens - by assertion, since initializeTestEnvironment() now fails a suite that holds one - so the step sat until its 20s timeout and the job exited 124. The canary itself had already passed. Move it to platformio-tests, where the binary is per-suite already and nothing downstream needs the daemon, and place it after the coverage capture so its extra runs stay out of the numbers. The shared-state self-test stays in simulator-tests; it touches no binary. Fitting failure mode for this branch: one shared program path, two consumers, and the second one silently getting the first one's build. * fix(ci): silence the XXE rule on the attribution checker semgrep blocks xml.etree.ElementTree.parse as XXE-prone. The input here is the JUnit report PlatformIO wrote moments earlier in the same run, and anything able to plant a hostile report is already executing its own code in that job, so parsing it defused changes nothing it could do. defusedxml is in the tree but only under bin/bump_metainfo with its own requirements, and pulling it onto this path would add an install step to every native test job for no reachable threat. Suppressed with a reason at the call site, the same shape as the subprocess-shell-true suppression in extra_scripts/nrf54l15_linker.py. * fix(test): address the review findings on the harness guards Two were real defects rather than style: - state_count_errors() returned "0\n0" for a log with no ERROR lines, because grep -c prints 0 and *then* exits 1, so the `|| printf 0` fallback appended a second one. The classifier threw a syntax error on it. Dormant only because every suite currently emits at least one ERROR line; the planned log-level demotions would have driven most suites to zero and tripped it everywhere, looking like the demotions broke the harness. - check-test-attribution.py returned OK for a report whose cases carry no `file` attribute. It cannot prove ownership in that state, so a changed JUnit format would have restored the exact false green it exists to catch. Now its own finding, listed and fatal. The rest: keep the sandbox when an error budget is breached, since that is the one outcome whose evidence was being deleted; reject a missing or non-numeric option value in stress-suite.sh instead of running an empty loop and reporting 0/0 as a pass; exit on INT/TERM rather than cleaning up and carrying on; drive repetitions through pio-test-isolate.sh so a stress run exercises the real invocation; require the canary to see MISATTRIBUTED rather than any non-zero exit, so an unreadable report cannot read as a caught mismatch; and check for listening sockets before every test, since a listener would be opened by the code under test. resetAdminKeyFallbackBudget() is a new PIO_UNIT_TESTING hook, shaped like the neighbouring resetRoutingAuthEvaluationCount(). The refill stamp is only meaningful against the clock that produced it, so a suite switching timebases leaves a stamp from the other one and the next unsigned subtraction reads as a near-infinite gap - silently refilling the bucket. Also move the semgrep marker onto its own line: buried mid-sentence in a comment it was ignored, and the XXE finding stayed blocking.	2026-08-16 11:34:02 +00:00
4 people	546b9d9e40	Block coordinate traffic on configured event channels (#11045) ... * Block coordinate traffic on configured event channels Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * Suppress event coordinates in reliable relay paths Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * Reject blocked phone coordinates before rate limiting Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * Prevent event coordinates from reaching MQTT Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * Add event coordinate policy preference Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * Test event coordinate policy in native CI Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * Make event policy test tolerate a full NodeDB Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * Test Router event coordinate enforcement Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * Test PhoneAPI event coordinate retry handling Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * Test reliable event coordinate suppression Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * Test MQTT event coordinate suppression Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * Run event policy behavioral suites in native CI Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent) Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> * tests: address CodeRabbit review feedback - test_event_channel_phone_api: complete the setUp/tearDown save-restore pair. GlobalState now carries cryptLock and myNodeInfo; setUp() nulls cryptLock before constructing MockRouter (Router's ctor asserts it is unset), and tearDown() restores both so the suite leaves no global mutated. Not reachable today - the globals start null in this binary - but the pair was asymmetric. - Replace the strcpy calls this branch added on Channel.settings.name (char[12]) with the bounded form the rest of the test tree already uses, strncpy(dst, src, sizeof(dst) - 1). Covers the flagged site in test_nexthop_routing plus the six equivalents in test_event_channel_phone_api, test_mqtt and test_position_precision, which trip the same ast-grep dangerous-buffer-functions-cpp rule. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Claude Opus 5 <noreply@anthropic.com>	2026-08-11 12:34:08 +00:00
Tom	de6b23190a	Test suite rebuild (#11322) ... * docs(nodedb): make the native node cap unambiguous The native node cap was stated in four places that disagreed, and the disagreement already caused a wrong diagnosis: a saturated 200-node database looked arithmetically impossible because the cap had been read as 248, computed from a header that does not apply on this platform. The real value is 198. On portduino MAX_NUM_NODES is not a compile-time constant at all - the variant defines it as `portduino_config.MaxNodes`, resolved at runtime, default 200 and settable per host with `General: MaxNodes`. variant.h is reached before mesh-pb-constants.h, so that header's ARCH_PORTDUINO branch never fires and its plausible-looking 250 is dead code. - #error-guard the dead branch rather than leave a wrong number where people grep. The guard found a real defect: seven translation units reach mesh-pb-constants.h without configuration.h (SerialConsole.cpp, StreamAPI.cpp, PacketAPI.cpp, ServerAPI.cpp, PiWebServer.cpp, ServiceEnvelope.cpp, MeshtasticOTA.cpp, and test/TestUtil.cpp), so each was compiling with a different MAX_NUM_NODES - and therefore a different PACKETHISTORY_MAX - than the rest of the build. Each now includes configuration.h first. It cannot be included from mesh-pb-constants.h itself: that reaches SerialConsole.h through DebugConfiguration.h and closes a cycle. - Name the bare 250 in getMaxNodesAllocatedSize() NODEDB_MIGRATION_LOAD_CEILING. It is a decode allowance for files written by larger-cap firmware, not a cap, and it read like one. - Fix docs/node_info_stores.md, which named the wrong source and a "10-250" range that is wrong for native, and the copilot-instructions tunables line that said "portduino 250". * test(harness): give each suite its own scratch HOME and report leftovers Native suites shared one directory. Every suite that constructs a NodeDB loads and saves ~/.portduino/default/prefs/ - nodes.proto, config.proto, channels.proto, module.proto, device.proto, warm.dat, transmit_history.dat - and nothing cleared it, so state leaked suite -> suite within a run and run -> every run after it. A test run could also rewrite a real meshtasticd node database on the same machine. Per-run isolation does not fix this: the leak is generated inside a single run, so the boundary has to be per suite. bin/pio-test-isolate.sh runs each suite in its own scratch $HOME, registered as test_testing_command for env:native and env:coverage so a bare `pio test` and CI get the same boundary, not just bin/run-tests.sh. It runs the binary unchanged and exits with its exit code, so PlatformIO's pass/fail is untouched. Overriding HOME here rather than around `pio` also sidesteps the blocker that a bare HOME= breaks pio's own ~/.platformio/penv/bin/pio lookup. Leftovers are reported as a second axis, PASS/FAIL x CLEAN/DIRTY, because an unintended write has no matching assertion by definition - nobody writes TEST_ASSERT for a save they do not know is happening. The harness asserts it from outside, so it applies to every suite without the author opting in. - Only the *set of changed paths* is asserted, never contents. Hashes answer the boolean "did this change?" and nothing more; content baselines over protobuf bytes would churn on every NodeInfoLite field added, which is how snapshot suites become noise. - Deliberate writes are declared in test/state-manifest.tsv - one central file, suite / flags / mandatory reason. run-tests.sh prints the opt-out count on every run. - Granularity follows the state flag, so the two ship together: per-test by default (TestUtil redefines RUN_TEST to checkpoint after each test, naming the exact test that dirtied things), suite boundary for state=per-suite, where carrying state across test cases is the declared behaviour. - A declared write that does NOT happen is reported as MISSING, not folded into DIRTY. It catches silently broken persistence; a warning for now, since some are conditional. - Graded AMBER, not RED. With isolation in place DIRTY means "undeclared", not "dangerous", and a check that lands red on day one gets switched off. Guard the guard, both halves: state_assert_empty() refuses to run a suite against a sandbox that is not empty (otherwise the after-diff measures against the wrong baseline and reports CLEAN while meaning nothing), and bin/test-state-check.sh drives the real wrapper with fixtures asserting CLEAN / CLEAN / DIRTY / MISSING plus both directions of the empty assertion. A checker that silently matches everything would otherwise pass forever. --write-manifest proposes entries for a human to paste and justify; it never applies them, and neither does CI. * test(harness): stop reporting Unity's exit code as a signal A native suite ends in exit(UNITY_END()), and UNITY_END() returns the failure count. PlatformIO's native runner reads that non-zero exit code as a POSIX signal number, so four failures print "Program received signal SIGILL", five print "SIGTRAP", and the suite is classified [ERRORED] rather than [FAILED]. There is no crash. The signal name tracks the failure count and nothing else - it moved SIGILL -> SIGTRAP when a diagnostic probe added a fifth failure - and it cost hours of hunting a memory bug that did not exist, on an env (native) that carries no sanitizer at all. It also explains the phantom extra test case in the totals: the runner adds a synthetic entry for the signal it thinks it saw. run-tests.sh now says so inline whenever a signal line appears, and the three agent-facing docs say it too. * test(admin): isolate NodeDB and globals per test setUp() did `if (!nodeDB) nodeDB = new NodeDB();` and never deleted it, so 83 of the 85 tests shared one never-reset database and never restored config, owner, devicestate or channelFile. The fixture that does restore them was opt-in and armed by exactly two tests. The setUp comment claiming the rest "set their own config/region state and are unaffected" was not true - the admin handlers under test write all four globals. Route every test through the fixture instead: setUp saves the globals and installs a fresh NodeDB, tearDown restores and deletes it. The two tests that armed it themselves no longer need to. All 85 pass, so nothing was silently relying on the shared state. It costs about 7% of the suite's runtime (a NodeDB construction is a loadFromDisk plus, with a region set, key generation) - worth paying to write the phase 3 tests against a clean fixture rather than 83 tests' residue. Also cap the per-test attribution in the run summary at five entries; the full list stays in the suite's sandbox. * test(fs): cover the bounded file-manifest walk getFiles() runs on every phone sync via STATE_SEND_FILEMANIFEST, and nothing asserted any of its bounding behaviour. It does execute unasserted from test_stream_api's handshakes, but the cap, the depth limit, the wasLimited paths, overlong-path rejection and capacity release were all unguarded. Eight tests, all describing what the code does today: today's code is already correct here, since #10778 landed the by-reference collectFiles(), the 64-entry cap, the strlcpy bounds and the swap-idiom release. They pass on arrival, which is the point - this is the baseline a later change has to leave alone. Two things they do not cover, and cannot: - Moving reserve() outside the __cpp_exceptions guard. Exceptions are on natively, so the #else branch is not compiled. The suite's job there is to prove that change alters nothing observable. - The file.name() null guard. No in-tree backend returns null; the guard is defensive. The manifest-release test pins the swap idiom rather than calling PhoneAPI's releaseFilesManifest(), which is file-local. It asserts capacity() == 0, not just size() == 0 - a size-only check passes on clear(), which is the bug #7924 shipped. Suite count 43 -> 44, recounted against the directories rather than copied. * test(admin): assert node-DB metadata saves skip the radio reload set_favorite_node, set_ignored_node and toggle_muted_node each persist a NodeInfoLite bit and nothing else. MeshService::reloadConfig() gates its region re-derivation and configChanged notification on saveWhat & (SEGMENT_CONFIG | SEGMENT_CHANNELS), so a SEGMENT_NODEDATABASE-only save already skips the live radio reconfigure. Pure characterization - all three pass on develop. Worth pinning because that reconfigure is the path implicated in the WisMesh Tag favourite-node crash, and develop asserts nothing about it: widening the saveWhat mask or reordering the check would currently go unnoticed. Ported from the config-save series along with ConfigChangedCounter (an Observer<void *> counting configChanged notifications, the only externally visible signal that the reload branch was taken) and TEST_NODE_NUM. They join the existing suite, so no suite-count change. * refactor(menu): extract the mute toggle into a named function The node menu's mute action was inline in a banner-callback lambda, and that lambda only ever runs via screen->showOverlayBanner() - which is why nothing in MenuHandler.cpp was reachable from a test. Lift the `selected == Mute` branch into menuHandler::toggleNodeMuted(uint32_t) and call it from the lambda. Behaviour-neutral by construction: same statements, same order, same bare saveToDisk(). The null check moves into the function, so the call site no longer needs its own lookup. Verified by the native build and suite; the byte-identical-image check on a headroom-constrained nRF52 board was not run locally - CI's firmware-size comment covers it. Three tests come with it, all describing today's behaviour: - the bit flips both ways and no configChanged fires (develop never calls reloadConfig on this path); - an unknown node is a no-op rather than a write; - and the segment mask. Flipping one NodeInfoLite bit currently rewrites all five segments via bare saveToDisk(). That is asserted deliberately, with the comment naming it as characterization of a known defect: a pending fix narrows it to SEGMENT_NODEDATABASE, and when it lands this assertion is expected to change, which makes the improvement visible in the diff instead of silent. saveToDisk() is not virtual, so the mask is observed through its effect - remove the five prefs files, toggle, and see which reappear. * docs(test): make every suite count a pointer to the canonical one test/native-suite-count is the registered total and is machine-checked against test/test_* on every full run and by the suite-count-check CI job. Every other statement of the count is a copy that drifts: copilot-instructions said 12, AGENTS.md said 19, and the real number is 44. Replace both literals with a pointer to the file, say explicitly that no document should state the count as a literal, and reframe the two suite listings as descriptions rather than inventories - they carry per-suite information the count does not, so they stay, but nothing should infer completeness from their length. Register the new FS suite in both. * test(harness): randomise suite order, reproducibly Landed last, deliberately. Randomising an order-dependent suite set does not find bugs so much as convert a silent pass into intermittent red, and the first instinct is to revert the randomisation rather than fix the coupling. Phases 1-2 removed the coupling; this keeps it removed. Both runners previously hid order dependence behind a fixed order that happened to differ between them, and neither order was chosen: CI's area rules put admin first, PlatformIO's local discovery is reverse alphabetical and put it last. CI was green by accident. - bin/run-tests.sh --shuffle / --seed <n>. The seed defaults to HEAD's short SHA: one order per commit, so a red is replayable and attributable to the diff instead of flaky, while the project keeps exploring orders. Printed at the start and carried into the RESULT line, so a verdict is replayable from that line alone; the full order is printed on failure, because for an order-dependent failure the order is the diagnostic. - The shuffle is a Fisher-Yates over a MINSTD generator rather than awk's rand(), whose sequence differs between gawk and mawk. A seed that does not reproduce the same order on another machine is not a seed. - Shuffling needs one `pio test -f <suite>` invocation per suite - PlatformIO orders by its own os.walk() over test/ and filters only select - which measures at about 4.7s per suite of extra startup. - CI shuffles its area order, seeded from GITHUB_SHA and printed with the command to replay it locally. Intra-area order stays PlatformIO's; controlling it there would mean per-suite invocations, which is a cost worth deciding separately. Also records the 16 measured entries in test/state-manifest.tsv, each with its reason, taken from a full run's --write-manifest output rather than guessed. * test(default): cover the region-throttle interval overload getConfiguredOrDefaultMsScaled(configured, default, nodes, TrafficType) is the overload every telemetry and position module actually calls, and nothing referenced TrafficType anywhere under test/. All four of its behaviours were unguarded: the no-region guard, the throttle <= 1 short-circuit, the multiply, and the 64-bit overflow clamp. The throttles are real, not hypothetical - EU_866 carries PROFILE_LITE, which sets both positionThrottle and telemetryThrottle to 10, so a change here moves broadcast spacing in that region by an order of magnitude. Each test pins numOnlineNodes at the congestion threshold and uses ROUTER, which never congestion-scales, so the coefficient is 1 and the throttle is the only variable. The overflow case needs a base above INT32_MAX/10, hence three days rather than one. * ci(test): keep pull-request suite order fixed, seed the rest Shuffling the area order on every run - including pull_request - would turn a contributor's PR red for an ordering they did not choose, which is how a randomisation gets reverted instead of the coupling being fixed. That is the exact dynamic the ordering work was sequenced last to avoid, and the previous commit walked straight into it. - pull_request keeps the fixed declared area order. - push and schedule shuffle, seeded from the commit SHA: deterministic per commit, printed, attributable, and never blocking someone else's PR. - A suite_order_seed input on workflow_call and workflow_dispatch overrides both, so a specific failing order can be replayed anywhere, including on a PR. The run log prints which mode it took, the resulting order, and the local command to replay it. * ci(test): satisfy CKV_GHA_7 and yamllint on the seed input The seed is reachable through workflow_call, which callers can pass programmatically. The workflow_dispatch copy tripped checkov's "workflow_dispatch inputs MUST be empty" rule, and suppressing it was not worth it: replaying a specific order is a local operation, and the run log already prints the exact bin/run-tests.sh command to do it. * style(menu): apply the node-ID format convention RadioInterface.cpp documents the rule: 0x%08x in logs, !%08x in user-facing display. MenuHandler held every remaining exception - seven logs printing bare %08X, and two display labels doing the same. Repo-wide there are now no bare %08X node IDs left in log calls. * ci(test): pass workflow inputs through env, not shell interpolation suite_order_seed and github.event_name were spliced into the run: script as ${{ }} text, so a value carrying shell metacharacters would execute as code on the runner rather than being read as data. semgrep (run-shell-injection) and zizmor (template-injection) both flag it. Both now arrive as environment variables and are read as "$VAR". * refactor(test): share the seeded shuffle between the harness and CI bin/run-tests.sh and test_native.yml each carried a byte-identical copy of the MINSTD Fisher-Yates awk. The workflow prints "replay locally: ./bin/run-tests.sh --shuffle --seed $seed" after a shuffled CI run, and that instruction is only true while the two agree - drift would be announced by a replay quietly reproducing a different order than the one that failed. Extract shuffle_suites() to bin/lib/shuffle.sh and source it from both. Permutations verified identical across seeds before and after the move. * fix(test): correct the shared-state MISSING check and summary join Three defects in the new harness: state_classify() matched declarations two different ways - state_path_declared() for "undeclared", a hand-rolled regex for "missing". Interpolating an entry into an ERE also let a metacharacter in a manifest name match a file that is not the declared one. Both directions now go through the one helper. `paste -sd'; '` does not join with "; ": with -s, paste cycles through a multi-character delimiter one character per join, so paths rendered as "a;b c;d e". Replaced with an awk join. test-state-check.sh ran on after a failed cd instead of stopping (SC2164). ./bin/test-state-check.sh: 6/6 fixtures pass, MISSING included. * fix(portduino): bound General.MaxNodes MaxNodes was validated only for <= 0. Any positive value, including a typo'd or pasted-in one, propagates to MAX_NUM_NODES and scales both the node DB and the nodes.proto decode ceiling - failing at boot with no obvious cause. The ceiling is a sanity bound, not a capability limit; raise it if a host genuinely needs more. * docs(nodedb): reconcile the capacity tables The property matrix omitted the ESP32-S3 100-node flash tier that the platform table above it lists, and neither mentioned that the WASM build overrides MaxNodes to 80 in wasm_config_apply(). * fix(nodedb): make mesh-pb-constants.h self-sufficient on portduino The ARCH_PORTDUINO #error assumed it was unreachable in a normal build. It is not: the vendored device-ui sources include this header without configuration.h, which broke both native-tft docker builds. Include configuration.h here instead, ahead of every compile-time default - variant.h overrides MAX_RX_TOPHONE as well as MAX_NUM_NODES, so placing it lower in the file just moves the divergence to a redefinition. The #error stays as a backstop for the case where that include genuinely stops providing the cap. Verified with the native env's own flags: a TU including only this header now compiles, normal-order use of both macros compiles, and NodeDB.cpp compiles. * fix(portduino): raise the MaxNodes ceiling to 16000 Marked artificial: nothing in the node DB fails at 16001. 16000 sits just under the 16384 (128 x 128) population where HopScalingModule saturates its sampling denominator and starts dropping nodes, so a host inside the bound still gets meaningful hop recommendations. * lint(trunk): advise on node IDs logged as bare %08x RadioInterface.cpp documents the convention - 0x%08x in logs, !%08x in display - but nothing enforced it, which is how the MenuHandler cluster drifted. 22 call sites in PacketHistory, NodeInfoModule and PositionModule are still off it. A trunk linter rather than a CI grep job, because trunk checks changed files: new violations get flagged without a 22-site cleanup landing in an unrelated PR. Modelled on the existing too-many-defined definition. Scoped to values it can tell are IDs - an ID-shaped argument (->num, .from, getNodeNum) or message text naming one. A 32-bit hex that is not an ID is out of scope, so the CRC32 logs in ethOTA.cpp are correctly ignored. Emits "note", trunk's only non-blocking level: "warning" and "info" both exit non-zero and would gate CI, which is not what a log-format nit deserves. The pre-existing sites are line-scoped in the allowlist, so a new bad call in those same files is still caught. * lint(trunk): stop exempting the known node-id-format sites The seeded allowlist made the rule green by declaring the backlog acceptable. Empty it instead, so the 22 pre-existing sites are reported and get cleaned up by whoever next edits those files. Costs nothing to do: the rule emits "note", so these are non-blocking either way. The allowlist stays for its real purpose - a value the linter misreads as an ID. * style: log node and packet IDs as 0x%08x Clears the 22 sites the node-id-format linter reports, so the rule starts from zero rather than from a backlog nobody can see - trunk suppresses pre-existing findings by default, so left alone these would not have surfaced on edit the way an empty allowlist implies. Format strings only; no argument or control flow changes. The !%08x user-facing display forms are deliberately untouched - that is the other half of the same convention. * test(harness): build once up front, so suite timings mean something run-tests.sh fused build and run in a single pio invocation, so whichever suite PlatformIO's directory walk reached first absorbed the entire src compile and reported it as its own duration. On a real run that made a 0.03s suite report 13m21s, and hid the build cost from every other number in the summary. Do what .github/workflows/test_native.yml already does: one --without-testing build pass, then run with --without-building. Measured on a full 44-suite run - the build is now a single reported figure and 968 test cases execute in 1.9s, with no suite above 0.084s. Build output goes to its own log rather than $LOG: the outcome regexes match "error:" and "[ERRORED]", so a compiler diagnostic sharing that file would read as a test failure. Both red paths now keep the log they quote from. $LOG and the build log are mktemps the EXIT trap removes, so the three grepped lines were previously all anyone ever saw - and the cause is usually further up than the first [FAILED]. * test(harness): keep the run log on every red path bin/pio-test-isolate.sh already keeps a failing or DIRTY suite's sandbox and log under .pio/test-state/<suite>/. What was missing is the cross-suite view: $LOG is a mktemp the EXIT trap deletes, so run-tests.sh quoted three grepped lines from a file that no longer existed by the time anyone looked. Preserve it as .pio/build/<env>/test-failure.log from both red paths - including "no success summary found", which said "see log" while preserving nothing, and which is exactly the case where the build died before any suite ran and so left no per-suite sandbox either. Cleared at the start of every run, so a green run cannot leave a red one's log lying around looking current. * fix(test): report the real failure count on a shuffled red A shuffled run is one `pio test` invocation per suite, all appending to the same log, so the log carries one PlatformIO "N test cases:" summary per suite. verdict_red() took `tail -1`, which reports whatever the LAST suite did: a failure in suite 3 printed a "0 failed" summary from suite 44 directly under "RED - failures detected:". Sum the summaries instead. A single summary line - every unshuffled run - is passed through verbatim, so the familiar output is byte-identical. The patterns are passed to the awk helper as strings rather than /regex/ literals: awk evaluates a regex literal in argument position as `$0 ~ /re/`, so the callee would receive 0 or 1 and silently sum garbage. * fix(test): do not emit an empty suite name for an empty shuffle `printf '%s\n' "$@"` with no arguments still writes one empty line, and both callers read shuffle_suites through mapfile, so an empty suite list arrived as a single suite named "". Return before the printf when there is nothing to shuffle. * test(harness): state and enforce the Linux host requirement The native harness is a Linux tool: bash 4+ (mapfile), GNU coreutils and GNU find (-printf, md5sum, -executable). Most of that predates this branch - mapfile and both find predicates are already on develop - but none of it was written down, so the requirement was there to be discovered rather than read. Refuse to start on a non-Linux uname instead of degrading. On a BSD userland this would not fail cleanly: it would mis-hash the sandbox and mis-read the suite list, and still print a verdict. A state check that silently measures the wrong thing is worse than one that declines to run. Carrying a per-host fallback was the alternative, and it buys a second code path that nothing in CI exercises. bin/test-native-docker.sh already exists for macOS and non-Linux hosts, and the native-macos PlatformIO env is a build target for meshtasticd, not a test host - the isolation wrapper is registered for env:native and env:coverage only. Documented in the script header, test/README.md, and both agent docs. * fix(test): terminate every suite with exit(UNITY_END()) Two sites across two suites ended on a bare UNITY_END(). That ends the reporting, not the suite: setup() returns, the runtime goes on calling loop(), and the process runs forever. PlatformIO does not notice - it reports a suite from its Unity output, not from process exit - so the suite passes, the run goes green, and the binary stays resident. Thirteen of them had accumulated on one dev box, the oldest 19 hours old. The costs are quiet by construction: - the per-suite sandbox is deleted underneath a live process, so its CLEAN/DIRTY verdict describes what the suite had written when the harness stopped looking, not what it left behind; - .gcda coverage and LeakSanitizer's report both flush from atexit handlers, so a suite that never exits contributes no coverage and gets no leak check; - each survivor pins its own deleted 94 MB binary, which du cannot see. One of the two is the #else of an architecture guard, which is the easiest one to get wrong - it looks like there is nothing to clean up. test_mqtt has a correct exit(UNITY_END()) in its live branch, so a "does this file call exit() anywhere" check passes the file whole. test_serial had two more. develop's serial-config validation rework restructured that suite - the architecture guard is gone and both remaining branches now exit correctly - so this commit no longer has anything to change there; bin/lint-unity-exit.sh, added later on this branch, is what keeps it that way. test/README.md gets a section on it, since the skeleton showing the right shape had not stopped this happening. * test(harness): detect and reap suites that outlive their run A suite that never exits was invisible: PlatformIO reports a suite from its Unity output, so the run stayed green while the binary kept running. Two checks, because they fail differently. Runtime, in bin/pio-test-isolate.sh: the sandbox $HOME is mktemp-unique per suite, so any process still holding it is a survivor of that suite. Matching on the environment rather than a remembered PID identifies one whatever its parentage - a fork, a grandchild, a process already reparented to init - none of which a $! comparison catches. Reaped before the after-fingerprint is taken, so that fingerprint measures a tree nobody is still writing to, and so a run cannot leave processes accumulating on the host. Recorded as a sixth summary column and graded AMBER: the tests did pass, but the CLEAN verdict and the coverage were measured under a false assumption. Author-time, as bin/lint-unity-exit.sh, wired into trunk at "note" like node-id-format: every UNITY_END() must be wrapped in exit(). The rule is per occurrence, and that is the point - a file-level "calls exit() somewhere" check passes test_serial and test_mqtt, which have a correct one in their live branch and a bare one in the #else. Running it over the tree turned up test_mqtt, which the file-level pass had missed. It allows `int rc = UNITY_END(); ...; exit(rc)`, used by test_packet_signing to restore globals between the summary and the exit. That is where the rule gives ground: capturing and never exiting would leak and is not flagged. Flagging a correct idiom would push someone to "fix" working code. bin/test-state-check.sh gains a survivor fixture, asserting the wrapper both reports and reaps - a detector that only reports leaves the host accumulating processes, which is half the harm. 8/8. * fix(lint): make the unity-exit scanner statement-aware The rule judged one physical line at a time, which reports two kinds of correct code as bare: /* a comment that happens to mention UNITY_END() */ <- interior lines were never stripped exit( UNITY_END()); <- exit( and the macro never met On a probe of both, two of three findings were wrong. This is a note-level rule whose whole job is advice, and bin/lint-node-id-format.sh already says why that matters: a false positive costs more than a miss. One that cries wolf gets ignored, and the real finding goes with it. Carry /* ... */ state across lines and accumulate logical statements before testing, with a 12-line cap so one unclosed call cannot swallow the rest of the file - the same structure lint-node-id-format.sh uses, so the two custom linters in bin/ work alike rather than each having its own idea. Verified both directions: the develop-era sources still produce the same four findings, the fixed tree produces none, and a probe covering block-comment interiors, wrapped exit(), line comments, return UNITY_END() and capture-then- exit reports only the genuinely bare calls - including a complete block comment followed by real bare code on the same line, which the state machine has to keep live. Reported by CodeRabbit on #11322. * fix(lint): tokenise instead of pattern-matching, and self-test it Second round of review findings on the same scanner, all confirmed by direct test before changing anything. Six defects, one root cause: layered regexes cannot tokenise C++. False positives (correct code reported): - UNITY_END() inside a string literal read as code False negatives (real leaks missed): - a string containing "/*" opened comment state and swallowed later lines - greedy .* removed everything between two block comments on one line, taking a bare call with it - myexit(UNITY_END()) matched the exit() exemption as a substring - x == UNITY_END() and total += UNITY_END() matched the assignment exemption Replaced with a character-level scan carrying comment state, and token-bounded exemptions: exit must be a whole identifier, and the capture form must be a plain `=`. Raw string literals are still not modelled - there are none under test/, and delimiter tracking for a case that does not occur would be untested code guarding untested code, so it is documented rather than guessed at. Also drops the `return UNITY_END()` exemption. It only terminates from main(), there is no main() under test/, and from a helper it just returns a count. bin/test-lint-unity-exit.sh pins all fifteen cases, every false positive and false negative found in review among them. The rule has been wrong twice in a way that looked fine by inspection; it needed a self-test more than it needed another careful reading. Two further findings in the same review: - bin/run-tests.sh dropped PASSTHRU in shuffled mode, so `--shuffle -vvv` built verbosely and then ran quietly. The shuffled loop now forwards EXTRA_ARGS, which is PASSTHRU minus the -f pair it supplies per suite. - bin/run-tests.sh did not guard `cd "$ROOT_DIR"`. And one that did not reproduce: the survivor fixture's glob does find the pid file (verified with the lookup instrumented - the earlier failure was an artifact of running the script from /tmp, where SCRIPT_DIR cannot resolve). The assertion was still weak, because an empty pid took the "not running" branch and passed vacuously. It now fails if the pid was never recorded, and finds the file by search rather than assuming a directory depth. Reported by CodeRabbit on #11322. * fix(lint): report each UNITY_END occurrence at its own location The self-test only asked "did the linter say anything", so it could not have caught a wrong line, a wrong column, or a missing second finding. Fixtures now assert the exact diagnostics as line:col, and the first run of that assertion found two real problems. The caret pointed at the wrong occurrence. For `exit(UNITY_END()); UNITY_END();` the verdict was right but the column was 17 - the wrapped call - because the scanner stripped terminating forms out of the whole statement and then reported the first occurrence it had seen. Two bare calls on one line reported once. Judged per occurrence now, by looking back through whitespace at what wraps it, so both the count and the caret are right. That also needed a position map from strip_noncode(): removing a comment or collapsing a literal shifts every later column, and counting occurrences in the raw line does not recover it either - TEST_MESSAGE("... UNITY_END() ..."); UNITY_END(); has two occurrences in the raw text and one in the code. Four of the expected columns I wrote by hand were also wrong, off by one. The linter was right in every case; the assertions were not. They are computed from the fixture text now rather than pasted from output, because a baseline accepted from the tool it is testing asserts nothing. 17 fixtures, including the two-on-one-line case from review and its mirror. Reported by CodeRabbit on #11322.	2026-08-06 14:05:07 +00:00
Thomas GöttgensandAustin	ecd59e3120	Package meshtasticd for Windows as an MSI (#11289) ... * Package meshtasticd for Windows as an MSI Adds a --service flag connecting meshtasticd to the Service Control Manager, a WiX MSI installing it as an auto-start LocalSystem service with config in %ProgramData%\Meshtastic, and a CI step attaching the MSI to releases. * Address review comments Bind workflow expressions to env vars in run: bodies, and build the service status per call with an atomic checkpoint. * Fix service stop state and CI lint Latch the stop under a mutex so a startup report cannot walk the state back. Ignore the new workflows in semgrep and checkov, as main_matrix already is. * Drop the checkov ignore for the winget workflow Resolve the newest release inside the job instead of taking workflow_dispatch inputs, so CKV_GHA_7 no longer fires and checkov stays active on the file. * Carry the MSI architecture into the winget manifest Parse it from the asset name instead of defaulting to x64, and fail on a multi-arch release rather than validating one at random. * Restore release/.gitignore * Leave the main matrix alone Release attachment moves to the matrix rework in #11151. The MSI is still built and uploaded as a CI artifact. --------- Co-authored-by: Austin <vidplace7@gmail.com>	2026-07-31 04:53:52 +00:00
Thomas Göttgens	047c4e9feb	add LR 2021 to portduino, and allow Framebuffer devices to rotate the screen from config (#11252) ... * add LR 2021 to portduino, and allow Framebuffer devices to rotate the screen from config. Requires https://github.com/meshtastic/device-ui/pull/355 and supersedes https://github.com/meshtastic/firmware/pull/10567 and https://github.com/meshtastic/firmware/pull/11138 Many thanks to the original authors https://github.com/a-li3n and https://github.com/jessm33 * Build LR2021Interface.cpp in the wasm env initLoRa() constructs LR2021Interface for Lora.Module: lr2021, so excluding the file from the native-wasm source filter left the constructor undefined at link time. LR20x0Interface.cpp stays excluded; it is template-only and comes in via the InterfacesTemplates.cpp amalgamation. Also replace the non-UTF-8 degree signs in the framebuffer rotation comment and correct the rfswitch alias cleanup comment. * Trim comments * Report setenv failure for the framebuffer rotation	2026-07-30 10:44:52 +00:00
Tom	2024bb8384	Arrival time fix perhaps (#11274) ... * Add explicit presence for MeshPacket.rx_time (arrival time) rx_time is now proto3 optional with a has_rx_time presence bit, matching the rx_rssi treatment. A node with no GPS and no phone connected yet has no time source at all, so a bare 0 was indistinguishable from a genuine 1970-01-01 reading; downstream consumers (replay packets, JSON serialization) now check has_rx_time instead of the value. * Dedupe rx_time stamping into a shared helper; trim a debug log string Extract the repeated haveTime/rx_time/has_rx_time stamp logic (5 call sites across Router.cpp, MeshBeaconModule.cpp, MeshService.cpp) into Router::computeRxTimeStamp()/stampRxTime(). Also shorten the new RTC.cpp LOG_DEBUG string. Saves 48 bytes of flash on rak4631 (measured), no behavior change. * Fix has_rx_rssi presence carried unconditionally through StoreForward replay preparePayload() set has_rx_rssi = true unconditionally on replay, regardless of whether the packet's rx_rssi at store time was a genuine measurement (e.g. MQTT-relayed packets carry no real RSSI). Store the presence bit alongside rx_rssi in PacketHistoryStruct and restore it on replay instead. Flagged by Copilot on #11271 (same root cause the has_rx_time explicit presence work fixes) but never addressed before that PR merged. * Trim comment blocks to the repo's 1-2 line guideline .github/copilot-instructions.md:338 caps code comments at 1-2 lines; several blocks added across the rx_time explicit-presence work ran well past that. Also consolidates Time.cpp's file-level doc comment into Time.h, where the rest of the Time:: API contract already lives. No behavior change. * Add rx_time explicit-presence test coverage - test_meshpacket_serializer: has_rx_time=false fixture plus tests asserting JsonSerialize/JsonSerializeEncrypted emit 0 rather than leaking the millis() placeholder, alongside the has_rx_time=true baseline. - test_stream_api: two tests driving a real PhoneAPI handshake (want_config_id through STATE_SEND_PACKETS) that simulate a phone time-giving transaction arriving before vs. after a queued packet is drained - covering both the reconciled and the ships-with-placeholder-absent paths of MeshService::reconcilePendingRxTimes(). * Fix three correctness issues flagged in review - Time.h: drop the reserved-identifier include guard (_MT_TIME_H); pragma once already covers it, matching convention elsewhere (e.g. RTC.h). - Time.cpp: rebase getMillis64()'s wrap accumulator when the test seam swaps clock sources, so a real<->injected clock jump isn't miscounted as a genuine 32-bit wrap. - NodeInfoModule: the 12h reply-suppression window is a local dedup duration, not a wall-clock reading - switch it to Time::getMillis64() so RTC-quality jumps and replayed packets' stale rx_time can't perturb it. - StoreForwardModule: has_rx_time was derived from *current* RTC quality at replay time rather than stored at capture time, so a history entry saved while time-blind could be misreported as a valid epoch once the clock later improved. Persist the presence bit in PacketHistoryStruct instead. * tryfix CI * post review fixes * more test fixes	2026-07-29 14:03:25 +00:00
Manuel	5f51bb1c1e	MUI: Portduino curl maps (#11214) ... * add libcurl, fix missing SDL2 * device-ui commit reference PR353 * add curl dependencies to CI build * switch to gnutls curl version * Update device-ui library dependency URL * Update device-ui dependency to new version * Fix formatting in Dockerfile package installation * Update device-ui library dependency URL	2026-07-28 11:09:40 +00:00
Thomas Göttgens	a808e992a1	Add native Windows build of meshtasticd (#11031)	2026-07-19 23:31:19 +02:00
Austin	a4ea55f919	Fix renovate comments (#11065) ... Fix renovate comments for: - Crypto - Adafruit_nRF52_Arduino - adafruit/Adafruit-MLX90614-Library - meshtastic/Fusion	2026-07-18 21:34:38 -04:00
5 people	8d1fbbf55f	Snake! (#10936) ... * Snake! * Add spiLock to snake score saving * Check fixes * More careful locking * WIP: Big Display Node * Update src/graphics/HUB75Display.cpp Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> * Add HUB75 Native * Add Tetris game module with core logic and UI integration - Implement TetrisGame class for game logic, including piece movement, rotation, and line clearing. - Create TetrisModule class to manage game state, input handling, and rendering on OLED display. - Introduce high score tracking with persistence and optional mesh broadcasting. - Define UI states for title, playing, paused, game over, and high scores. - Implement input handling for game controls and state transitions. - Add rendering functions for the game board, high scores, and title screen. * feat(snake): add snake graphics and update display logic in SnakeModule * Prompt for Initials for Tetris, too * refactor games module * Games refactor * hub75 native double buffer * Games tuning * Make joystick repeat events on held button * Add clouds and colors * Fix breakout and more color * difficulty tuning * trunk * refactor game announcements, etc * Scale chirpy gravity as game speed increases * Portduino, check for hub75 display before reading in hub75 options * Final(?) games tuning * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Properly ignore input when games screen not shown * Fail gracefully when HUB75 is selected but not supported. --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Ixitxachitl <kramerfm@gmail.com> Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>	2026-07-16 18:35:33 -05:00
Ben Meadors	6c7ee8afc7	Add MemAudit: per-subsystem heap accounting in the boot log (#10900) ... * Add MemAudit: per-subsystem heap accounting in the boot log The 2.8.0 nRF52840 heap-exhaustion field reports had to be diagnosed by hand, reconstructing each subsystem's heap footprint from source and build flags one report at a time. This makes every future report self-diagnosing from the serial log: a tiny fixed-size registry (src/memory/MemAudit.*) that big long-lived allocations report into, printed as one line at the end of setup() and alongside the periodic "Heap free:" log: MemAudit[boot]: tmm=2500 warm=4000 pkthist=5824 nodedb=13440 msgstore=2200 pktpool(live)=3270 total=31234 Instrumented: NodeDB hot vector (nodedb) + satellite maps (satmaps, rb-tree overhead estimated), WarmNodeStore (warm), PacketHistory records and hash index (pkthist), TrafficManagement caches (tmm/tmm_ni), MessageStore text pool (msgstore), TFT line/repaint buffers (display), and live in-flight packets (pktpool(live)) via an optional audit tag on the packet pool allocator - the one hot path, counted with a relaxed 32-bit atomic add (single instructions on Cortex-M, no locks). Cost: 128 B RAM for the 16-tag table, well under 1 KB flash on rak4631. MESHTASTIC_MEM_AUDIT=0 compiles it out to inline no-op stubs (call sites need no ifdefs); STM32WL, the tightest flash target, defaults off. New native suite test_mem_audit covers add/set/snapshot arithmetic, tag reuse (pointer and cross-TU strcmp fallback), null/unknown tags, and table-full behavior; test/native-suite-count bumped to 28. * native-wasm: add src/memory/ to the curated source filter The wasm env denies all sources and adds an explicit file list; MemAudit callers (main, MeshService, NodeDB, PacketHistory) are in that list but src/memory/MemAudit.cpp was not, so wasm-ld failed on undefined memaudit:: symbols.	2026-07-06 13:18:49 -05:00
Ben Meadors	0e84c1a827	Harden XEdDSA unsigned-packet policy and add coverage (#10858) ... Audit of the XEdDSA packet-signing implementation (#10478) surfaced several issues in when unsigned packets are accepted on receive or emitted on send. This fixes them and adds regression coverage. - Unicast NodeInfo exchange no longer breaks against signer nodes: the NodeInfoModule downgrade drop is gated to broadcasts, since senders never sign unicast (want_response replies, directed exchanges). - Replace the payload-size sign heuristic with an exact encoded-size gate (signedDataFits) and mirror it on the receive side, removing a dead band where 167-168 B broadcasts were signed then failed TOO_LARGE. - Extract the receive policy into checkXeddsaReceivePolicy() and apply it to plaintext-MQTT decoded downlink, which previously skipped signature verification and downgrade protection entirely. - Reject signatures whose length is neither 0 nor 64 as malformed, so a crafted partial signature can't inflate the size estimate and dodge the unsigned-downgrade drop. - Hold cryptLock on the MQTT verify path (shared Ed25519 key cache). - Clear any client-preset signature on packets we originate, on all builds. - Randomized (hedged) signing per the Signal XEdDSA spec: bump the meshtastic/Crypto pin to the build where XEdDSA::sign mixes 32 bytes of caller randomness into the nonce as Z (meshtastic/Crypto#3), and seed those bytes in xeddsa_sign from HardwareRNG (checked, with a seeded-CSPRNG fallback). test_crypto pins that repeated signs differ and both verify. Adds test coverage: test_packet_signing groups A-E (receive matrix, send policy, NodeInfo backstop, encoding invariants, decoded-ingress policy), test_mqtt end-to-end downlink cases, and a test_crypto randomization check.	2026-07-02 11:48:58 -05:00
Tom	3becaf2d95	emdashes begone (#10847)	2026-07-01 19:01:27 -05:00
Ben MeadorsandAustin	0baf8b1db6	Portduino WASM hello world (still experimental) (#10793) ... * Add ARCH_PORTDUINO_WASM build: meshtasticd in WebAssembly over WebUSB Compile the full portduino firmware to WebAssembly (Emscripten) so a real node runs in a browser tab or headless Node, driving a LoRa radio over WebUSB through a CH341 — the desktop Ch341Hal path with its libusb backend swapped for a WebUSB one. The native/desktop portduino build is unchanged. New build env under src/platform/portduino/wasm/ (excluded from the native build_src_filter): WebUSB libpinedio backend, config/FS/region/MAC/PhoneAPI glue, wasm setup/loop, JS WebUSB runtime, and build stubs. bin/build-portduino-wasm.sh runs a standalone cached emcc build to build/wasm/meshnode.{mjs,wasm}. Six firmware sources gain #ifdef ARCH_PORTDUINO_WASM guards (single-threaded cooperative emscripten_sleep loop, continuous RX, US region default, std RNG, no-popen exec); none affect non-wasm builds. * PortDuino WASM: CI build job, cross-platform libdeps, configurable adapter bin/build-portduino-wasm.sh: auto-detect native-macos (macOS) vs native (Linux/CI) libdeps with a NATIVE_ENV override, and use the SAME env's Crypto with an XEdDSA-present guard. Drops the heltec-v3/Crypto borrow — the meshtastic/Crypto pin already ships XEdDSA; the native libdeps cache was just stale. No env pin change. Add .github/workflows/build_portduino_wasm.yml: build the ARCH_PORTDUINO_WASM target in CI (ubuntu + emsdk, native libdeps) so it can't silently bit-rot; asserts build/wasm/meshnode.{mjs,wasm}. src/platform/portduino/wasm: add wasm_set_lora_* setters so the JS host can configure any CH341 LoRa adapter (module, USB ids, DIO/TCXO, SPI speed, pins); wasm_config_apply falls back to the MeshToad defaults when unset. * WASM: build as a first-class [env:wasm] via platform-wasm (retire emcc script) Replace the standalone emcc build (bin/build-portduino-wasm.sh) with a normal PlatformIO env, `pio run -e wasm`, using the new meshtastic/platform-wasm platform (emcc/em++ + Asyncify, the WASM sibling of platform-native). The portduino WebAssembly node is now built the same way as every other target. - variants/native/portduino/platformio.ini: add [env:wasm] (platform pinned to platform-wasm, board wasm). Translates the script's source set into a curated build_src_filter, the ~30 EXCLUDE_* defines, and the lib set; defines ARCH_PORTDUINO_WASM in-repo so correctness doesn't hinge on the platform's board.json. - extra_scripts/wasm_link_flags.py: the firmware-specific emcc *link* settings (EXPORT_NAME, EXPORTED_RUNTIME_METHODS, EXPORTED_FUNCTIONS, ASYNCIFY_IMPORTS). PlatformIO feeds build_flags to compile only, so these must ride LINKFLAGS; without it the WebUSB Asyncify seam and the JS host's runtime methods are dropped (the _wasm_* exports survive only via EMSCRIPTEN_KEEPALIVE). - PortduinoGlue.{h,cpp}: guard the yaml-cpp dependency out of the WASM build (#ifndef ARCH_PORTDUINO_WASM around the include, emit_yaml/loadConfig/ readGPIOFromYaml). The browser node configures via the wasm_set_lora_* setters and dead-strips the YAML path; this drops the host yaml-cpp build dependency entirely. Native is unchanged (guards are inert there). - portduino_glue_wasm.cpp / portduino_main_wasm.cpp: repair EM_ASM JS that a formatter had mangled (!== -> != =, regex split) in the prior landing; the emcc link succeeds regardless, so CI now runs `node --check meshnode.mjs`. - .github/workflows/build_portduino_wasm.yml: build via `pio run -e wasm` (artifacts under .pio/build/wasm/), trigger on the shared inputs the env inherits (root platformio.ini, bin/platformio-*.py). - NodeDB.cpp: drop the dead ARCH_PORTDUINO_WASM region-default branch (region now defaults the same as native). - Crypto renovate pins: add the missing gitBranch so they track upstream. Output: .pio/build/wasm/meshnode.{mjs,wasm} (ES module, factory createMeshNode). Verified: pio run -e wasm (against the published platform archive), node --check, module instantiates in Node with all exports; native-macos + Docker native unit tests (450/450) still pass. * Fix name on the Piggystick * wasm: pin platform-wasm at the GPL-3.0-relicensed commit platform-wasm's LICENSE was always GPLv3 (matching this firmware), but its platform.json/README still declared Apache-2.0 (mis-copied from platform-native). That's fixed upstream in b83fa5b; bump the [env:wasm] pin to it. Build output is unchanged (license metadata only). Verified: pio run -e wasm against b83fa5b. * wasm: make reboot() actually restart the node (was a no-op) In wasm the reboot path is live (main.cpp -> Power::powerCommandsCheck -> Power::reboot), but Power::reboot's ARCH_PORTDUINO arm tore down SPI/Wire/Serial and then called the no-op ::reboot() stub — leaving the node running with a dead radio until the tab was manually reloaded. Triggers include an admin/phone reboot, factory reset, the "reconfigure failed" path, and the 60 s stuck-TX hardware watchdog (RadioLibInterface). - Power::reboot(): add an ARCH_PORTDUINO_WASM arm (before ARCH_PORTDUINO, since the wasm build defines both) that skips the host teardown and just calls ::reboot(). notifyReboot already let modules persist. - ::reboot() (glue): hand off to the JS host — browser reloads the tab (NodeDB state survives via IDBFS, same identity returns); headless calls Module.onReboot if provided, else logs. Loose !=/== so clang-format doesn't mangle the EM_ASM JS. - README: document the reboot handoff + the Module.onReboot hook. Verified: pio run -e wasm + node --check (EM_ASM intact); native-macos unaffected. * wasm: rename env to native-wasm and run it in the main CI matrix Rename [env:wasm] -> [env:native-wasm] for consistency with the portduino native family (native, native-macos, native-tft). The build dir follows to .pio/build/native-wasm/ (artifact is still meshnode.{mjs,wasm}); the PIOENV guard in extra_scripts/wasm_link_flags.py, the README, and the companion wrapper move with it. The board stays `wasm`. Also wire the build into normal CI: build_portduino_wasm.yml becomes a reusable workflow (workflow_call) invoked as the `build-wasm` job of main_matrix.yml, so the WebAssembly node is built like every other platform instead of on a separate path trigger. * native-wasm: auto-locate the Emscripten SDK (pre-build script) `pio run -e native-wasm` failed with "emcc not found" whenever it was invoked from a shell that hadn't sourced emsdk_env.sh — a VS Code task, an IDE build button, a bare terminal. Add a pre: extra script that probes the usual emsdk locations ($EMSDK_ENV, $EMSDK, ~/emsdk, ./.emsdk, the sibling companion checkout), sources emsdk_env.sh, and imports the resulting environment so the platform builder and emcc see PATH/EMSDK/EM_CONFIG. No-op when emcc is already reachable (CI), silent when no SDK is found (the platform emits its own error). * wasm: address PR review feedback - js/bridge.js: import CH341 from "./ch341.js" (sibling in this layout), not "../src/ch341.js" which doesn't resolve here. - js/ch341.js: a zero-length transferIn while MISO bytes are still outstanding now throws instead of breaking out with a partially-filled buffer — silent SPI corruption becomes a loud error, matching the comment above it. - libpinedio_webusb.c: webusb_set_auto_cs honors the AUTO_CS option (? 1 : 0) instead of the always-on ? 1 : 1. Runtime behavior is unchanged — Ch341Hal sets AUTO_CS=0 right after pinedio_init (RadioLib drives the active-low NSS); the option just isn't set yet at init, so this now correctly defaults off. - SX126xInterface.cpp: the RX-start error log now names the method actually called (startReceive vs startReceiveDutyCycleAuto) instead of hardcoding the duty-cycle name in the WASM branch. * native-wasm: drop the emsdk bootstrap shim (now in platform-wasm) The Emscripten SDK auto-location moved into the platform-wasm builder, so the firmware no longer needs its own pre: extra script. Remove extra_scripts/wasm_emsdk_env.py and bump the platform pin to the build that carries the bootstrap. The wasm_link_flags.py post script stays — those exported fns / runtime methods / Asyncify import seam are firmware-app-specific. * wasm: use the canonical companion name (meshtasticd-wasm-node) The companion repo was renamed meshtastic-web-node -> meshtasticd-wasm-node; fix the stale name in the wasm README and bump the platform pin to the build that promotes the canonical name in its emsdk auto-location. * wasm: re-entrancy guard for the API/region entry points + flaky-open retry Two robustness fixes for the browser node: - Re-entrancy guard. The node is single-threaded + Asyncify: while setup()/loop() is suspended inside a WebUSB transfer, the JS event loop is free, so a stray DOM/timer callback that re-enters a wasm_* entry point starts a second Asyncify unwind ("async operation already in flight" abort) or clobbers shared PhoneAPI state (observed as a "PhoneAPI::available unexpected state" flood). Add a g_wasm_in_firmware flag set around setup()/loop() (portduino_main_wasm.cpp); the wasm_set_region / wasm_api_to_radio / wasm_api_from_radio / wasm_api_available entry points now reject a mid-tick call (return busy) instead of corrupting or aborting. The host must still call them between ticks — this is the safety net the design lacked, not a substitute for the JS queue. - CH341 open retry (js/bridge.js). First-connect WebUSB is flaky — the interface is briefly unclaimable right after the grant, or held by a prior session, giving a transient "Could not open SPI: -1". Retry the open with a short backoff, closing the device between attempts so claimInterface starts clean. * wasm: exclude emscripten-only sources from cppcheck The `check` board matrix runs `pio check` (cppcheck) over all of src/, including src/platform/portduino/wasm/. cppcheck can't parse the EM_ASYNC_JS/ EM_JS macros (Syntax Error: AST broken at libpinedio_webusb.c:39, internalAstError) and these sources are not part of any checked board build ([env:native-wasm] is board_level=extra, compiled by the build-wasm CI job). Suppress the wasm dir in suppressions.txt, the same way generated/ and .pio/ are already excluded. * wasm: coalesce FS.syncfs so two never run at once IDBFS syncfs is async; the explicit wasm_fs_sync (5s timer + post-save + beforeunload) could overlap a prior in-flight sync, warning "2 FS.syncfs operations in flight at once". Serialize: if a sync is running, mark a pending re-sync and let the in-flight one chain it on completion — at most one in flight, trailing writes still flushed. (Companion drops IDBFS autoPersist so this is the single persistence path.) * wasm: silence false-positive SAST on the emscripten glue - extra_scripts/wasm_link_flags.py: restore the trunk-ignore-all(ruff/F821, flake8/F821) header every other SCons extra_script carries; Import/env are SConscript-injected globals, so ruff/flake8 flag them as undefined. - .semgrepignore: exclude src/platform/portduino/wasm/js/ (browser WebUSB glue, not part of the firmware binary). The unsafe-formatstring rule false-positives on its benign retry/diagnostic console logs. * Update .github/workflows/build_portduino_wasm.yml Co-authored-by: Austin <vidplace7@gmail.com> --------- Co-authored-by: Austin <vidplace7@gmail.com>	2026-06-28 06:50:35 -05:00
3 people	00f5fa80be	Add native Portduino malloc shim (#10677) ... * Add native Portduino malloc shim * Taking copilots advice Honestly I don't think it matters that much, but if it makes copilot happy, return ret if something weird happens. Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>	2026-06-25 20:48:38 -05:00
TomandClaude Sonnet 4.6	c51c01607d	Traffic Management module: dedup, rate limiting, role-aware policing (#10706) ... Adds the Traffic Management module (TMM) plus the NodeDB/warm-store and next-hop foundations it builds on: - Unified per-node cache (flat array, 8-bit relative ticks) shared by all features; role-aware throttles for tracker / lost-and-found. - Position deduplication: drop unchanged position rebroadcasts within a configurable interval; precision driven off the channel ceiling (clamped to the public-key max on well-known channels). Enabled by default at 11h. - Per-node rate limiting and unknown-packet filtering (config-driven; a non-zero companion field enables each feature -- no bool toggles). - NodeInfo direct response from cache with role-based hop clamps. - Persistent next-hop overflow store: confirmed hops have no TTL, are seeded from NodeInfoLite at boot, and survive hot-store eviction. - Three-tier sender-role resolution (hot NodeInfoLite -> warm store -> TMM cache). Role is cached write-time (seeded on first track, refreshed from NodeInfo), pins its cache entry like a next-hop hint, and is evicted last. - Warm store caches device role + protected category across reboot/eviction. - PositionModule stationary floor for tracker / lost-and-found. - PSRAM gating for warm/satellite/TMM cache sizes; STM32WL excluded. Protobufs: TrafficManagementConfig trimmed to the five uint32 fields actually used; submodule repointed to protobufs develop. Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>	2026-06-20 20:35:14 -05:00
6 people	8267bb22bd	Packet Signing via XEdDSA (#10478) ... * Test commit for XEdDSA support * Update to Crypto lib in Meshtatic org * Generate a new node identity on key generation (#7628) * Generate a new node identity on key generation * Fixes * Fixes * Fixes * Messed up * Fixes * Update src/modules/AdminModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/mesh/NodeDB.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Figured it out! * Cleanup * Update src/mesh/NodeDB.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/mesh/NodeDB.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/AdminModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update crypto commit hash * Some fixes for xeddsa pr (#9610) * fix: add null check for getMeshNode() in NodeInfoModule getMeshNode() can return nullptr for unknown nodes. Dereferencing without a check crashes the firmware when receiving NodeInfo from a node not yet in the database. * fix: enforce XEdDSA signature verification and prevent stripping Previously, failed signature verification still allowed the packet through, making signatures purely cosmetic. Now: - Failed verification drops the packet (DECODE_FAILURE) - Successfully verified nodes get HAS_XEDDSA_SIGNED bitfield set - Unsigned packets from previously-signing nodes are rejected - Log levels reduced from WARN/ERROR to DEBUG/WARN as appropriate * fix: include packet metadata in XEdDSA signature The signature now covers [fromNode | packetId | portnum | payload] instead of just the payload bytes. This prevents: - Replay attacks (different packetId fails verification) - Reattribution (different fromNode fails verification) - Portnum redirection (different portnum fails verification) Also adds a key initialization check to xeddsa_sign (returns false if XEdDSA keys are all zeros) and checks the return value in the encode path. * fix: handle existing key pair in AdminModule security config When a user provides both a valid private key and public key via admin config, the crypto engine's DH private key and owner public key were never loaded. DMs and XEdDSA signing would silently break. Add an else branch to load both keys into the crypto engine. * perf: cache Ed25519 public key conversion in xeddsa_verify curve_to_ed_pub() performs field element parsing, inversion, and multiplication on every call. Since packets from the same node tend to arrive in bursts, a single-entry cache avoids repeating this expensive conversion for consecutive packets from one sender. * fix: skip identity cleanup when node number is unchanged createNewIdentity() was called on every generateCryptoKeyPair(), including normal boots where the same key is regenerated. This caused unnecessary NodeDB writes and old-node cleanup logic to run when the node number hadn't actually changed. Also fixes only zeroing byte[0] of the old node's public key instead of clearing the entire array. * fix: replace hardcoded 120 with derived XEDDSA_SIGNATURE_SIZE constant The payload size check for XEdDSA signing used a magic number (120). Replace with a derivation from DATA_PAYLOAD_LEN and XEDDSA_SIGNATURE_SIZE so the limit adjusts automatically if constants change. This also increases the max signable payload from 120 to 169 bytes, which is still safe since the actual encoded size is checked after pb_encode. * fix: add const qualifiers to XEdDSA verify and curve_to_ed_pub inputs pubKey, payload, and signature parameters in xeddsa_verify are input-only and should not be modified. Same for curve_pubkey in curve_to_ed_pub. * chore: remove commented-out old Crypto dependency in portduino.ini * Leave out the admin module change for now --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * trunk * protobuf re-update * Protobufs * Merge resolution fix * Put XEDDSA on the right bit * NodeDB update to new nodeInfoLite accessors, etc * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Refine unsigned packet rejection logic in Router (#10534) * use hardware random to fill the first 32 signature bytes with entropy prior to signing. * Add XEdDSA packet-signing policy tests and update dependencies for macos * Minor fixes * integrate XEdDSA support and update dependencies across multiple modules --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Wessel <github@weebl.me> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2026-06-13 06:45:56 -05:00
TomandCopilot	de345939af	Automatic variable hop limits based on mesh activity and size estimation (#10176) ... * asdf * Implement SphereOfInfluenceModule for traffic management and eviction tracking * Implement Sphere of Influence module for dynamic hop limit adjustment and role-based floor * Update SAMPLING_DENOMINATOR to improve mesh size estimation accuracy * Add debug logging for scale factor estimation and per-hop node counts in SphereOfInfluenceModule * Enable variable hop limits and role-based hop floors in Sphere of Influence module * Respond to copilot review * Disable variable hop limits and role-based hop floors in Sphere of Influence module * Apply suggestions from code review Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Implement adaptive sampling for unique node ID tracking in Sphere of Influence module * Add state persistence for Sphere of Influence module * Enhance Sphere of Influence module with state management and adaptive sampling adjustments * Refactor hop scaling functionality: remove SphereOfInfluenceModule and introduce HopScalingModule - Deleted SphereOfInfluenceModule.h, consolidating its responsibilities into the new HopScalingModule. - Added HopScalingModule.h and HopScalingModule.cpp to manage hop scaling logic, including eviction tracking and sampling-based mesh size estimation. - Implemented methods for recording evictions and packet senders, estimating scale factors, and computing required hops based on node activity. - Introduced state persistence for hop scaling parameters to maintain continuity across reboots. - Enhanced thread safety and modularity by utilizing concurrency features. * Guard out STM32. Sowwy. * Refactor HopScalingModule: enhance sampling logic and improve state management * Add unit tests for HopScalingModule: implement mock database and various test scenarios * Refactor test output in HopScalingModule tests: replace printf with TEST_MESSAGE for better integration with Unity * Refactor HopScalingModule logging: replace lastStatusMode with descriptive mode names for improved readability * Refactor test_main.cpp: change NodeNum variable to static and improve comments for clarity * Remove unnecessary delay in setup function for improved test performance * Add missing include for MeshTypes in test_main.cpp * Refactor HopScalingModule tests: enhance mesh topology scenarios and improve test clarity * Update HopScalingModule tests: flesh out node scenarios and improve clarity for dense and sparse mesh cases * Fix politeness factor calculations in HopScalingModule and update related test scenarios for clarity. Remove outdated design doc. * Enhance HopScalingModule: add sampled estimate for scaling decisions and refactor initial run state management * Add sample traffic injection for HopScaling tests to enhance sampledEst visibility * Enhance HopScalingModule: adjust windowFraction calculation for early triggers and improve test output formatting * Enhance HopScalingModule: add jitter functionality to sampling denominator and update tests for consistent behavior * Enhance HopScalingModule: implement adaptive sampling denominator adjustment and add reset functionality for tests * Enhance HopScalingTestShim: add test-only clock and window helpers, update injectSampleTraffic for adaptive sampling, and improve scenario summary output * Enhance HopScalingModule: add detailed documentation for functions, improve clarity of jitter and sampling logic, and reset functionality in tests * Enhance HopScalingModule: add evictionEstimate parameter to estimateScaleFactor and update related logging for improved mesh size estimation * Enhance HopScalingModule: adjust effective rolls calculation for improved accuracy, add eviction estimate logic, responding to all copilot review points * Implement CompactHistogram for parallel hop scaling sampling - Added CompactHistogram class to track node hop distances with bitwise sampling. - Integrated CompactHistogram into HopScalingModule for independent packet sampling. - Updated NodeDB to feed both the hop scaling module and the new histogram sampler. - Enhanced HopScalingModule with methods to sample packets for the histogram and retrieve hop distribution statistics. - Implemented tests for CompactHistogram functionality, including sampling, window rolling, and adaptive denominator scaling. - Updated existing tests to validate the integration of the new histogram sampling mechanism. * Enhance CompactHistogram and HopScalingModule: add per-hop distribution functionality, improve time handling for unit tests, and refine test setup for deterministic behavior * CompactHistogram: add mesh size estimation, improve entry replacement logic, and update logging for per-hop distribution * Refactor HopScalingModule and CompactHistogram integration - Removed the suggestedHopFromCompactHistogram function to streamline hop suggestion logic. - Updated HopScalingModule to directly utilize CompactHistogram's internal methods for hop suggestions and sampling. - Enhanced logging in HopScalingModule to provide detailed histogram statistics. - Modified test cases to ensure comprehensive coverage of new histogram behaviors and sampling logic. - Improved node ID distribution in tests to better exercise sampling mechanisms. - Ensured that filtering denominators are held for 12 hours before dropping, enhancing stability in sampling. * Refactor CompactHistogram to support 13-hour activity tracking and introduce politeness regimes - Updated the bitfield structure to accommodate 13-hour seen tracking. - Changed the logic in rollHour() to analyze activity over the last 0-2 hours vs. 1-3 hours for politeness factor calculation. - Introduced three politeness levels: GENEROUS, DEFAULT, and STRICT based on recent activity ratios. - Adjusted filtering and sampling logic to reflect the new 13-hour tracking period. - Updated unit tests to validate new behavior and ensure proper functionality of politeness regimes. * Enhance CompactHistogram and HopScalingModule for improved sampling and decision-making - Introduced a session-specific hash seed in CompactHistogram to reduce bias in node ID sampling. - Updated sampling logic to use hashed node IDs instead of raw IDs for filtering and entry management. - Added histogram rollover tracking in HopScalingModule to ensure proper decision-making after initial data collection. - Adjusted logging to reflect the active state of the histogram and its comparison with NodeDB advisory hops. - Enhanced unit tests to validate new sampling logic and memory layout changes. * Expose hashNodeId for testing in CompactHistogram * Add mesh trend statistics to CompactHistogram for enhanced activity tracking * Implement histogram state persistence in CompactHistogram with save and load functions * Refactor CompactHistogram to improve entry management and enhance rollHour logging * feat: add HopScalingModule for adaptive hop limit recommendations Introduces HopScalingModule, a sampled hop-distance histogram that recommends the minimum hop limit needed to reach ~40 nodes, and automatically reducing the hops as the mesh grows. Key design: - 512-byte packed histogram (128 × 4-byte Record entries) embedded in a new HopScalingModule. - Each Record: 16-bit node hash, 3-bit hop distance, 13-bit seen bitmap - Sampling filter: only nodes where (hash & (denom-1)) == 0 are kept; denominator doubles on overflow and halves when utilisation is low - Hourly rollHour(): tallies per-hop counts, walks scaled buckets to find the minimum hop satisfying TARGET_AFFECTED_NODES (40), applies a politeness extension based on recent/older activity ratio, shifts all seen bitmaps, and persists state to /prefs/hopScalingState.bin - Hop recommendation gated by bootstrap (requires >=1 rollHour before overriding HOP_MAX) - NodeDB calls samplePacketForHistogram() on every non-MQTT rx packet - Module also estimates total mesh size and logs useful information about mesh characteristics. Changes: - src/modules/HopScalingModule.h/.cpp: new module - src/mesh/NodeDB.cpp: wire up samplePacketForHistogram - src/mesh/Router.cpp: consume getLastRequiredHop() - test/test_hop_scaling/: 12-test suite covering all mesh topologies and anticipated operational requirements * test: increase run iterations in sparse to dense transition test * feat: refactor HopScalingModule to use RUNS_PER_HOUR constant and improve logging * feat: enhance HopScalingModule with filtering denominator management and add tests for state transitions * refactor: remove CompactHistogram module and related files * address copilot review comments * Tweak: packet sampling only lora * ove role-based hop floor logic and related definitions into the module - keep it in one place. * Refactor MockNodeDB to use nodeInfoLiteSetBit for MQTT flag setting * Refactor hop scaling parameters and logic to integer maths and put default values in defaults.h. Small flash size reduction, no functional impact. * Update unit test preprocessor directives to PIO_UNIT_TESTING for consistency * refactor: improve test output organization and clarity in hop scaling tests --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2026-06-04 05:59:49 -05:00
Jonathan Bennett	bb86cf4e81	Merge remote-tracking branch 'origin/master' into develop	2026-05-04 18:10:59 -05:00
Austin Lane	0240a00d09	MacOS: Re-Add Orcania/Yder	2026-05-01 10:55:32 -04:00
Austin	c0fcf807c0	MacOS: Correct pkg-config name openssl for ulfius. (#10369)	2026-05-01 10:42:17 -04:00
4 people	55f40ecdfd	Add ulfius webserver support to macos native target (#10366) ... * Add ulfius webserver support to macos native target * fix: update PiWebServer docs for macOS and add explicit cstring include Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/3ce82582-23e0-4afe-b22f-b24f81721488 Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * fix: add --cflags to openssl@3 pkg-config and fix apt package name Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/1a6c59aa-4393-4134-8cee-61eeee0e9127 Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> --------- Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>	2026-05-01 08:56:49 -05:00
3 people	9c72767c01	macOS: enable CH341 LoRa-hardware path (fix serial truncation, document setup) (#10320) ... * macOS: enable CH341 LoRa-hardware path — fix serial truncation, document setup Verified on Apple Silicon with a CH341A USB-SPI bridge (VID 0x1A86, PID 0x5512) wired to an SX1262 (Meshstick variant) that the existing `pine64/libch341-spi-userspace` lib_dep works on macOS as-is — Apple's bundled CH34x driver only matches the CH340 *UART* variant (PID 0x7523), so the CH341A's interface 0 is left unclaimed and libusb opens / configures / claims it directly via IOUSBHostInterface. End-to-end test: meshtasticd boots, libusb claim succeeds, SX1262 init returns 0, TCP API serves the meshtastic CLI's --info / --sendtext flow. Two changes: 1. **`PortduinoGlue.cpp:497`**: pass `sizeof(serial)` (= 9) instead of the literal `8` to `Ch341Hal::getSerialString()`. The function in `USBHal.h:61-68` treats `len` as buffer size and reserves one slot for the null terminator (`bytesCopied = (len - 1) < 8 ? (len - 1) : 8`), so passing 8 produced a 7-char serial — which then broke the `strlen(serial) == 8` check at line 502, skipping the auto-MAC derivation from serial + product string. On Linux this was masked by the BlueZ HCI MAC fallback in `getMacAddr()` at lines 139-157, but on macOS that fallback is `__linux__`-guarded so the serial path is mandatory and the truncation left `mac_address` empty, causing the daemon to exit with `*** Blank MAC Address not allowed!`. 2. **`variants/native/portduino/platformio.ini`**: expand the `[env:native-macos]` comment block with a "Real LoRa hardware on macOS" section. Documents: - Why no upstream library change is needed (Apple kext targets CH340/UART, not CH341A/SPI; libusb's `#ifdef __linux__` skip is correct for macOS in this case). - How to point `meshtasticd` at an existing platform-agnostic `bin/config.d/lora-*.yaml` for CH341 hardware. - The auto-MAC-derivation contract (now working with this fix). - `ioreg` and `LIBUSB_DEBUG=4` diagnostic recipes for the failure mode where a third-party WCH `CH34xVCPDriver` *would* claim interface 0 (`kmutil unload -b <bundleID>` workaround). No upstream library forks, no PR chain, no additional lib_deps — the existing `pine64/libch341-spi-userspace` + libusb-1.0 stack does the right thing on macOS already. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2026-04-28 10:54:01 -05:00
3 people	6c7ffa1054	macOS: enable CH341 LoRa-hardware path (fix serial truncation, document setup) (#10320) ... * macOS: enable CH341 LoRa-hardware path — fix serial truncation, document setup Verified on Apple Silicon with a CH341A USB-SPI bridge (VID 0x1A86, PID 0x5512) wired to an SX1262 (Meshstick variant) that the existing `pine64/libch341-spi-userspace` lib_dep works on macOS as-is — Apple's bundled CH34x driver only matches the CH340 *UART* variant (PID 0x7523), so the CH341A's interface 0 is left unclaimed and libusb opens / configures / claims it directly via IOUSBHostInterface. End-to-end test: meshtasticd boots, libusb claim succeeds, SX1262 init returns 0, TCP API serves the meshtastic CLI's --info / --sendtext flow. Two changes: 1. **`PortduinoGlue.cpp:497`**: pass `sizeof(serial)` (= 9) instead of the literal `8` to `Ch341Hal::getSerialString()`. The function in `USBHal.h:61-68` treats `len` as buffer size and reserves one slot for the null terminator (`bytesCopied = (len - 1) < 8 ? (len - 1) : 8`), so passing 8 produced a 7-char serial — which then broke the `strlen(serial) == 8` check at line 502, skipping the auto-MAC derivation from serial + product string. On Linux this was masked by the BlueZ HCI MAC fallback in `getMacAddr()` at lines 139-157, but on macOS that fallback is `__linux__`-guarded so the serial path is mandatory and the truncation left `mac_address` empty, causing the daemon to exit with `*** Blank MAC Address not allowed!`. 2. **`variants/native/portduino/platformio.ini`**: expand the `[env:native-macos]` comment block with a "Real LoRa hardware on macOS" section. Documents: - Why no upstream library change is needed (Apple kext targets CH340/UART, not CH341A/SPI; libusb's `#ifdef __linux__` skip is correct for macOS in this case). - How to point `meshtasticd` at an existing platform-agnostic `bin/config.d/lora-*.yaml` for CH341 hardware. - The auto-MAC-derivation contract (now working with this fix). - `ioreg` and `LIBUSB_DEBUG=4` diagnostic recipes for the failure mode where a third-party WCH `CH34xVCPDriver` *would* claim interface 0 (`kmutil unload -b <bundleID>` workaround). No upstream library forks, no PR chain, no additional lib_deps — the existing `pine64/libch341-spi-userspace` + libusb-1.0 stack does the right thing on macOS already. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2026-04-28 08:31:08 -05:00
5 people	126861fd16	Native MacOS hello world (#10309) ... * Native MacOS hello world * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/native/portduino/platformio.ini Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix: ensure null-termination in getSerialString() and handle len==0 Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/e5647919-2255-48ad-bcaa-7a2c2fdbf212 Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>	2026-04-27 07:07:49 -05:00
5 people	06a6c3ee20	Native MacOS hello world (#10309) ... * Native MacOS hello world * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/native/portduino/platformio.ini Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix: ensure null-termination in getSerialString() and handle len==0 Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/e5647919-2255-48ad-bcaa-7a2c2fdbf212 Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>	2026-04-26 22:07:07 -05:00
Clive BlackledgeandCopilot	016e68ec53	Traffic Management Module for packet forwarding logic (#9358) ... * Add ESP32 Power Management lessons learned document Documents our experimentation with ESP-IDF DFS and why it doesn't work well for Meshtastic (RTOS locks, BLE locks, USB issues). Proposes simpler alternative: manual setCpuFrequencyMhz() control with explicit triggers for when to go fast vs slow. * Addition of traffic management module * Fixing compile issues, but may still need to update protobufs. * Fixing log2Floor in cuckoo hash function * Adding support for traffic management in PhoneAPI. * Making router_preserve_hops work without checking if the previous hop was a router. Also works for CLIENT_BASE. * Adding station-g2 and portduino varients to be able to use this module. * Spoofing from address for nodeinfo cache * Changing name and behavior for zero_hop_telemetry / zero_hop_position * Name change for exhausting telemetry packets and setting hop_limit to 1 so it will be 0 when sent. * Updated hop logic, including exhaustRequested flag to bypass some checks later in the code. * Reducing memory on nrf52 nodes further to 12 bytes per entry, 12KB total using 8 bit hashes with 0.4% collision. Probably ok. Adding portduino to the platforms that don't need to worry about memory as much. * Fixing hopsAway for nodeinfo responses. * traffic_management.nodeinfo_direct_response_min_hops -> traffic_management.nodeinfo_direct_response_max_hops * Removing dry run mode * Updates to UnifiedCacheEntry to use a common cache, created defaults for some values, reduced a couple bytes per entry by using a resolution-scale time selection based on configuration value. * Enhance traffic management logging and configuration. Updated log messages in NextHopRouter and Router to include more context. Adjusted traffic management configuration checks in AdminModule and improved cache handling in TrafficManagementModule. Ensured consistent enabling of traffic management across various variants. * Implement destructor for TrafficManagementModule and improve cache allocation handling. The destructor ensures proper deallocation of cache memory based on its allocation source (PSRAM or heap). Additionally, updated cache allocation logic to log warnings only when PSRAM allocation fails. * Update TrafficManagementModule with enhanced comments for clarity and improve cache handling logic. Update protobuf submodule to latest commit. * Creating consistent log messages * Remove docs/ESP32_Power_Management.md from traffic_module * Add unit tests for Traffic Management Module functionality * Fixing compile issues, but may still need to update protobufs. * Adding support for traffic management in PhoneAPI. * Making router_preserve_hops work without checking if the previous hop was a router. Also works for CLIENT_BASE. * Enhance traffic management logging and configuration. Updated log messages in NextHopRouter and Router to include more context. Adjusted traffic management configuration checks in AdminModule and improved cache handling in TrafficManagementModule. Ensured consistent enabling of traffic management across various variants. * Implement destructor for TrafficManagementModule and improve cache allocation handling. The destructor ensures proper deallocation of cache memory based on its allocation source (PSRAM or heap). Additionally, updated cache allocation logic to log warnings only when PSRAM allocation fails. * Update TrafficManagementModule with enhanced comments for clarity and improve cache handling logic. Update protobuf submodule to latest commit. * Add mock classes and unit tests for Traffic Management Module functionality. * Refactor setup and loop functions in test_main.cpp to include extern "C" linkage * Update comment to include reduced memory requirements Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Re-arranging comments for programmers with the attention span of less than 5 lines of code. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update comments in TrafficManagementModule to reflect changes in timestamp epoch handling and memory optimization details. * bug: Use node-wide config_ok_to_mqtt setting for cached NodeInfo replies. * Better way to handle clearing the ok_to_mqtt bit * Add bucketing to cuckoo hashing, allowing for 95% occupied rate before major eviction problems. * Extend nodeinfo cache for psram devices. * Refactor traffic management to make hop exhaustion packet-scoped. Nice catch. * Implement better position precision sanitization in TrafficManagementModule. * Added logic in TrafficManagementModule to invalidate stale traffic state. Also, added some tests to avoid future me from creating a regression here. * Fixing tests for native * Enhance TrafficManagementModule to improve NodeInfo response handling and position deduplication logic. Added tests to ensure local packets bypass transit filters and that NodeInfo requests correctly update the requester information in the cache. Updated deduplication checks to prevent dropping valid position packets under certain conditions. --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2026-03-11 06:12:12 -05:00
Jonathan Bennett	45fbc0f9d3	Remove stale variant.h defines (#9470) ... * Remove noop CANNED_MESSAGE_MODULE_ENABLE define * Remove over-eager warning removal * Remove unused LED_CONN * Dead defines removal * Rename oddball LED pin name * Rename second oddball LED pin name * Remove another dead define	2026-01-29 10:58:06 -06:00
Austin	96c42229b0	Renovate all the things (#8994)	2025-12-17 11:05:48 -06:00
Austin	ed77ba5612	Replace PIO fuzzy version matches (reproducible builds) (#8984) ... This change does not introduce version *changes*, but simply "updates" to the version already being referenced by the fuzzy-match (^)	2025-12-15 19:48:34 -06:00
Austin	66ff1536f3	Meshtastic build manifest (#8248)	2025-12-08 17:21:23 -06:00
3 people	859ae4d3d2	Plain RAK4631 should not compile EInk and TFT display code (#8811) ... * Plain RAK4631 should not compile EInk and TFT display code * Add USE_TFTDISPLAY to variant files. * Derp * Undo the platformio.ini changes to heltec_v4 * Drop unneeded src_filter lines --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Jason P <applewiz@mac.com>	2025-12-01 19:19:50 -06:00
3 people	03f69b3b77	Update RadioLib to v7.4.0 (#8456) ... * fix strlcpy compile error in Ubuntu 22.04 (#8520) * fix strlcpy error in Ubuntu 20.04 * add to native after tests * Add support for RAK_WISMESH_TAP_V2 and RAK3401 hardware models (#8537) * Update RadioLib to v7.4.0 --------- Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Daniel.Cao <144674500+DanielCao0@users.noreply.github.com> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-11-04 06:04:56 -06:00
Mike Weaver	858e8c6fef	portduino, handle sdl2 builds (#8355) ... fix linux native build by adding sdl2 libraries	2025-10-15 06:15:57 -05:00
AustinandBen Meadors	74e6723ad9	Force coverage tests to run in simulation mode (#8251) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * Force coverage tests to run in simulation mode --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-07 13:14:19 -05:00
Tom FifieldandAustin	518680514f	Actions: Simplify matrices, cleanup build_one_* (#8218) (#8239) ... Co-authored-by: Austin <vidplace7@gmail.com>	2025-10-07 13:37:13 +11:00
Jonathan Bennett	9ded6a5215	Pull in panel_sdl directly and drop native-sdl target	2025-10-04 16:54:19 -05:00
Jonathan Bennett	1c1c0cc791	Portduino config refactor (#7796) ... * Start portduino_config refactor * refactor GPIOs to new portduino_config * More portduino_config work * More conversion to portduino_config * Finish portduino_config transition * trunk * yaml output work * Simplify the GPIO config * Trunk	2025-09-03 17:50:26 -05:00
Jonathan Bennett	ca79760372	Add support for the RV-3028 on native Linux (#7802)	2025-08-31 21:08:58 -05:00
Jonathan Bennett	5ce47045e7	Add SDL option to BaseUI on Native (#7568) ... * Add SDL option to BaseUI on Native * Update to latest LovyanGFX PR and use LGFX_SDL define * Move SDL backend to native-sdl target	2025-08-20 12:51:14 -05:00
Austin	52f0e5a3db	Fix 'buildroot' target (OpenWRT) (#7620)	2025-08-14 12:31:25 -05:00
Austin	6c12baf4ed	Migrate remaining variants to new dir structure (#7412)	2025-07-21 19:28:14 -05:00