mirror of
https://github.com/meshtastic/firmware.git
synced 2026-06-16 04:30:18 -04:00
a541957480
* Migrate esp32 families to pioarduino platform
* ESP32c6 align text.handler_execute same as C3
* Use pioarduino `develop`
The latest fixes and the latest bugs!
* preliminary esp32p4.ini
* pioarduino: Update LovyanGFX
Includes Manuel's recent commit
* pioarduino 3.3.6
* pioarduino 3.3.6 *release*
chasing the release
* pioarduino: Fix OG ESP32 duplicate libs
* pioarduino: T-Beam 1W CDC mode
* pioarduino: disable network provisioning (wifiprov)
* pioarduino: use legacy esptoolpy naming (forward-compatible)
* Update lovyangfx from `develop` commit to 1.2.19
* fix esp32p4.ini
* check for esp32 w/ wifi
* esp32-p4 specific adaptations
* Switch to meshtastic/esp32_https_server fork (idf5 branch)
* don't ignore esp_lcd
* config for MUI
* fix/workaround SDMMC
* revert a6f6175, update to 3.3.8
* enable esp_hosted for esp32-p4 (experimental)
* Pioarduino 55.03.38-1
* NimBLE-Arduino -> Arduino "BLE" (3.3.x) migration (#10164)
* NimBLE-Arduino -> Arduino "BLE" (3.3.x) migration
* More NimBLE
* Fix Device Name in ATT Read Request (0x2A00).
Device Name is exposed in two places:
- Advertisement data: this is set properly in startAdvertising.
- GATT attribute Device Name (0x2A00). This one is handled internally in NimBLE
and comes from ble_svc_gap_device_name_set. This is set initially, but then
BLEDevice::createServer calls ble_svc_gap_init which resets the device name.
This causes the device to apparently "change name after pairing":
< ACL Data TX:... flags 0x00 dlen 7 #113 [hci0] 14.241149
ATT: Read Request (0x0a) len 2
Handle: 0x0003 Type: Device Name (0x2a00)
> ACL Data RX: Handle 2048 flags 0x02 dlen 11 #115 [hci0] 14.269050
ATT: Read Response (0x0b) len 6
Value[6]: 6e696d626c65 # "nimble"
Workaround this by setting the device name once again after
BLEDevice::createServer.
* Temporarily lower CORE_DEBUG_LEVEL to INFO to avoid triggering an apparent ESP-IDF Bluetooth bug when re-connecting to Pixel 8 Android devices.
Initial pairing works, but after ESP32 is rebooted, phone fails to reconnect. Meshtastic app shows it as disconnecting immediately. LightBlue shows a more detailed error "Peripheral Connection - Warning: onConnectionStatusChange: status 61" (0x3D - MIC Failure).
Bug report to Espresssif: https://github.com/espressif/esp-idf/issues/18126#issuecomment-4286197744
* Temporarily disable ble_gap_set_data_len, causes crash with Pixel 8 Android reconnect.
Crash looks like this:
[ 11966][E][BLEAdvertising.cpp:341] setScanResponseData(): ble_gap_adv_rsp_set_data: 22
[ 11975][E][BLEAdvertising.cpp:1554] start(): Host reset, wait for sync.
ERROR | ??:??:?? 11 BLE failed to start advertising
Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.
Core 0 register dump:
PC : 0x420e6190 PS : 0x00060730 A0 : 0x820e158b A1 : 0x3fce50c0
A2 : 0x00000000 A3 : 0x3fcb8600 A4 : 0x3fcb85cc A5 : 0x00000000
A6 : 0x00000000 A7 : 0x00000c03 A8 : 0x00000000 A9 : 0x3fce50b0
A10 : 0x0000000e A11 : 0x00000000 A12 : 0x00000010 A13 : 0x3fce50e0
A14 : 0x00000c03 A15 : 0x00000001 SAR : 0x0000001e EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000000 LBEG : 0x400570e8 LEND : 0x400570f3 LCOUNT : 0x00000000
Backtrace: 0x420e618d:0x3fce50c0 0x420e1588:0x3fce5110 0x420dfe87:0x3fce5200 0x420dfefb:0x3fce5220 0x420dff3f:0x3fce5240 0x4219602b:0x3fce5260 0x4037b0e5:0x3fce5280 0x4201edf3:0x3fce52a0
Connection seems fast enough even without this. We'll investigate the
reason for the crash and re-enable once it's safe.
---------
Co-authored-by: Catalin Patulea <cronos586@gmail.com>
* Add extension from pioarduino nag
"Jason2866.esp-decoder"
* Cleanup after merge
* ESP32: Disable classic bluetooth
* Cleanup: Fix ADC channels on new variants
* InkHUD: Fix type casting for message size in saveToFlash method
inkhud compiles again!
* update p4 esp_hosted for BT
* I thought I fixed this
* fix linker error using response file (p4 only)
* fix infinite loop
* Fix Power.cpp check warning
Local variable 'config' shadows outer variable [shadowVariable]
* Build ESP32 original with NimBLE ('custom_sdkconfig' approach). (#10235)
* Re-enable littlefs json manifest
This works locally again :)
Not sure what changed
* Re-add tool-mklittlefs
* sensecap indicator fixes after upgrade arduino-esp & lovyanGFX libs
* hackaday fix
* robot tbeam cache error fix
Co-authored-by: Copilot <copilot@github.com>
* trunk fmt
* ignore trunk
* BLEDevice::deinit() added
Co-authored-by: Copilot <copilot@github.com>
* platformio-custom: Modify mtjson target dependency to prevent fake-success. (#10291)
Co-authored-by: Copilot <copilot@github.com>
* Fix ESP32-C6 linker errors.
Align .text.handler_execute section to 4 bytes and update watchdog timer core mask configuration
Co-authored-by: Copilot <copilot@github.com>
* tlora-c6: Disable Screen
MESHTASTIC_EXCLUDE_SCREEN=1 on tlora-c6.
It doesn't have a screen, and this gets it compiling again (saving flash).
* Use mverch's iram_memset hack for all OG-ESP32
* Refactor watchdog timer initialization and handling
* use adc_channel_t in variant.h
* Fix variant headers
* More idiomatic default ethernet that doesn't break the build
* Elecrows: Delete problematic variant.cpp
Not needed after USE_ETHERNET_DEFAULT
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: Catalin Patulea <cronos586@gmail.com>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
Co-authored-by: Copilot <copilot@github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
79 lines
2.5 KiB
C
79 lines
2.5 KiB
C
#define LED_POWER 18
|
|
|
|
#define _VARIANT_HELTEC_WIRELESS_TRACKER
|
|
#define HELTEC_TRACKER_V1_X
|
|
|
|
// I2C
|
|
#define I2C_SDA SDA
|
|
#define I2C_SCL SCL
|
|
|
|
// ST7735S TFT LCD
|
|
#define ST7735S 1 // there are different (sub-)versions of ST7735
|
|
#define ST7735_CS 38
|
|
#define ST7735_RS 40 // DC
|
|
#define ST7735_SDA 42 // MOSI
|
|
#define ST7735_SCK 41
|
|
#define ST7735_RESET 39
|
|
#define ST7735_MISO -1
|
|
#define ST7735_BUSY -1
|
|
#define TFT_BL 21 /* V1.1 PCB marking */
|
|
#define ST7735_SPI_HOST SPI3_HOST
|
|
#define SPI_FREQUENCY 40000000
|
|
#define SPI_READ_FREQUENCY 16000000
|
|
#define SCREEN_ROTATE
|
|
#define TFT_HEIGHT DISPLAY_WIDTH
|
|
#define TFT_WIDTH DISPLAY_HEIGHT
|
|
#define TFT_OFFSET_X 26
|
|
#define TFT_OFFSET_Y -1
|
|
#define SCREEN_TRANSITION_FRAMERATE 3 // fps
|
|
#define DISPLAY_FORCE_SMALL_FONTS
|
|
#define USE_TFTDISPLAY 1
|
|
|
|
// pin 3 is Vext on v1.1 - HIGH enables LDO for Vext rail which goes to:
|
|
// GPS UC6580: GPS V_DET(8), VDD_IO(7), DCDC_IN(21), pulls up RESETN(17), D_SEL(33) and BOOT_MODE(34) through 10kR
|
|
// GPS LNA SW7125DE: VCC(4), pulls up SHDN(5) through 10kR
|
|
// LED: VDD, LEDA (through diode)
|
|
|
|
#define VEXT_ENABLE 3 // active HIGH - powers the GPS, GPS LNA and OLED
|
|
#define VEXT_ON_VALUE HIGH
|
|
#define BUTTON_PIN 0
|
|
|
|
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
|
#define ADC_CHANNEL ADC_CHANNEL_0
|
|
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
|
|
#define ADC_MULTIPLIER 4.9 * 1.045
|
|
#define ADC_CTRL 2 // active HIGH, powers the voltage divider. Only on 1.1
|
|
#define ADC_USE_PULLUP // Use internal pullup/pulldown instead of actively driving the output
|
|
|
|
#undef GPS_RX_PIN
|
|
#undef GPS_TX_PIN
|
|
#define GPS_RX_PIN 33
|
|
#define GPS_TX_PIN 34
|
|
#define PIN_GPS_RESET 35
|
|
#define PIN_GPS_PPS 36
|
|
// #define PIN_GPS_EN 3 // Uncomment to power off the GPS with triple-click on Tracker v1.1, though we'll also lose the
|
|
// display.
|
|
|
|
#define GPS_RESET_MODE LOW
|
|
#define GPS_UC6580
|
|
#define GPS_BAUDRATE 115200
|
|
|
|
#define USE_SX1262
|
|
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
|
#define LORA_RESET 12
|
|
#define LORA_DIO1 14 // SX1262 IRQ
|
|
#define LORA_DIO2 13 // SX1262 BUSY
|
|
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
|
|
|
|
#define LORA_SCK 9
|
|
#define LORA_MISO 11
|
|
#define LORA_MOSI 10
|
|
#define LORA_CS 8
|
|
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY LORA_DIO2
|
|
#define SX126X_RESET LORA_RESET
|
|
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 |