mirror of
https://github.com/meshtastic/firmware.git
synced 2026-11-07 23:04:49 -05:00
Thomas Göttgens
642076baed
* Show Ethernet status on the WiFi screen On W5500 and CH390 boards the WiFi frame shows Ethernet link state, speed, duplex and IP when Ethernet is enabled and has link, or WiFi is not configured. If WiFi is also configured, one line shows its IP or connection state. * Use the CH390 driver for UDP multicast link checks On USE_CH390D builds ETH resolved to the unused Arduino ETHClass, so onSend() always saw Ethernet as disconnected and never sent. * Require HAS_ETHERNET for USE_WS5500 and USE_CH390D
771 lines
26 KiB
C
771 lines
26 KiB
C
/*
|
|
|
|
TTGO T-BEAM Tracker for The Things Network
|
|
|
|
Copyright (C) 2018 by Xose Pérez <xose dot perez at gmail dot com>
|
|
|
|
This code requires LMIC library by Matthijs Kooijman
|
|
https://github.com/matthijskooijman/arduino-lmic
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <Arduino.h>
|
|
|
|
#if __has_include("Melopero_RV3028.h")
|
|
#include "Melopero_RV3028.h"
|
|
#endif
|
|
#if __has_include(<PCF8xRTC.h>)
|
|
#include <PCF8xRTC.h>
|
|
#endif
|
|
|
|
/* Offer chance for variant-specific defines */
|
|
#include "variant.h"
|
|
|
|
// Both PCF parts answer at the same address and differ only in register layout, so a variant
|
|
// picks one by defining PCF8563_RTC or PCF85063_RTC to it.
|
|
#if defined(PCF8563_RTC)
|
|
#define PCF_RTC_ADDRESS PCF8563_RTC
|
|
#define PCF_RTC_CHIP PCF8xRTC::PCF8563
|
|
#elif defined(PCF85063_RTC)
|
|
#define PCF_RTC_ADDRESS PCF85063_RTC
|
|
#define PCF_RTC_CHIP PCF8xRTC::PCF85063
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Display feature overrides
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// Allow build environments to opt-in explicitly to the E-Ink UI stack while
|
|
// keeping headless targets slim by default. Existing variants that already
|
|
// define USE_EINK continue to work without additional flags.
|
|
#ifndef MESHTASTIC_USE_EINK_UI
|
|
#ifdef USE_EINK
|
|
#define MESHTASTIC_USE_EINK_UI 1
|
|
#else
|
|
#define MESHTASTIC_USE_EINK_UI 0
|
|
#endif
|
|
#endif
|
|
|
|
#if MESHTASTIC_USE_EINK_UI
|
|
#ifndef USE_EINK
|
|
#define USE_EINK
|
|
#endif
|
|
#else
|
|
#undef USE_EINK
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Version
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// If app version is not specified we assume we are not being invoked by the build script
|
|
#ifndef APP_VERSION
|
|
#error APP_VERSION must be set by the build environment
|
|
#endif
|
|
|
|
// FIXME: This is still needed by the Bluetooth Stack and needs to be replaced by something better. Remnant of the old versioning
|
|
// system.
|
|
#ifndef HW_VERSION
|
|
#define HW_VERSION "1.0"
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Configuration
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// Pre-hop drop handling (compile-time flag).
|
|
#ifndef MESHTASTIC_PREHOP_DROP
|
|
#define MESHTASTIC_PREHOP_DROP 1
|
|
#endif
|
|
|
|
// Use polynomial approximations for trigonometric functions to save flash.
|
|
// Override with -D MESHTASTIC_TRIG_APPROX=0 for exact trig for special use cases e.g. close to Earth's poles.
|
|
#ifndef MESHTASTIC_TRIG_APPROX
|
|
#define MESHTASTIC_TRIG_APPROX 1
|
|
#endif
|
|
|
|
// Debug/test only: let a wired client (serial/TCP) inject frames into the RX pipeline as if they had
|
|
// arrived over LoRa - a SIMULATOR_APP ToRadio packet is delivered through the real receive path on real
|
|
// hardware (see MeshService::injectAsReceived). This forges over-the-air traffic, so it MUST stay 0 in
|
|
// any shipping build; enable per-build with -D MESHTASTIC_ENABLE_FRAME_INJECTION=1.
|
|
#ifndef MESHTASTIC_ENABLE_FRAME_INJECTION
|
|
#define MESHTASTIC_ENABLE_FRAME_INJECTION 0
|
|
#endif
|
|
|
|
/// Convert a preprocessor name into a quoted string
|
|
#define xstr(s) ystr(s)
|
|
#define ystr(s) #s
|
|
|
|
/// Convert a preprocessor name into a quoted string and if that string is empty use "unset"
|
|
#define optstr(s) (xstr(s)[0] ? xstr(s) : "unset")
|
|
|
|
// Nop definition for these attributes that are specific to ESP32
|
|
#ifndef EXT_RAM_ATTR
|
|
#define EXT_RAM_ATTR
|
|
#endif
|
|
#ifndef IRAM_ATTR
|
|
#define IRAM_ATTR
|
|
#endif
|
|
#ifndef RTC_DATA_ATTR
|
|
#define RTC_DATA_ATTR
|
|
#endif
|
|
#ifndef EXT_RAM_BSS_ATTR
|
|
#define EXT_RAM_BSS_ATTR EXT_RAM_ATTR
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Regulatory overrides
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// Override user saved region, for producing region-locked builds
|
|
// #define REGULATORY_LORA_REGIONCODE meshtastic_Config_LoRaConfig_RegionCode_SG_923
|
|
|
|
// Total system gain in dBm to subtract from Tx power to remain within regulatory and Tx PA limits
|
|
// The value consists of PA gain + antenna gain (if variant has a non-removable antenna)
|
|
// TX_GAIN_LORA should be set with definitions below for common modules, or in variant.h.
|
|
|
|
// Gain for common modules with transmit PAs
|
|
#ifdef EBYTE_E22_900M30S
|
|
// 10dB PA gain and 30dB rated output; based on measurements from
|
|
// https://github.com/S5NC/EBYTE_ESP32-S3/blob/main/E22-900M30S%20power%20output%20testing.txt
|
|
#define TX_GAIN_LORA 7
|
|
#define SX126X_MAX_POWER 22
|
|
#endif
|
|
|
|
#ifdef EBYTE_E22_900M33S
|
|
// 25dB PA gain and 33dB rated output; based on TX Power Curve from E22-900M33S_UserManual_EN_v1.0.pdf
|
|
#define TX_GAIN_LORA 25
|
|
#define SX126X_MAX_POWER 8
|
|
#endif
|
|
|
|
#ifdef NICERF_MINIF27
|
|
// Note that datasheet power level of 9 corresponds with SX1262 at 22dBm
|
|
// Maximum output power of 29dBm with VCC_PA = 5V
|
|
#define TX_GAIN_LORA 7
|
|
#define SX126X_MAX_POWER 22
|
|
#endif
|
|
|
|
#ifdef NICERF_F30_HF
|
|
// Maximum output power of 29.6dBm with VCC = 5V and SX1262 at 22dBm
|
|
#define TX_GAIN_LORA 8
|
|
#define SX126X_MAX_POWER 22
|
|
#endif
|
|
|
|
#ifdef NICERF_F30_LF
|
|
// Maximum output power of 32.0dBm with VCC = 5V and SX1262 at 22dBm
|
|
#define TX_GAIN_LORA 10
|
|
#define SX126X_MAX_POWER 22
|
|
#endif
|
|
|
|
#ifdef USE_GC1109_PA
|
|
// Power Amps are often non-linear, so we can use an array of values for the power curve
|
|
#define NUM_PA_POINTS 22
|
|
#define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
|
|
#endif
|
|
|
|
#ifdef USE_KCT8103L_PA
|
|
// Power Amps are often non-linear, so we can use an array of values for the power curve
|
|
#if defined(HELTEC_WIRELESS_TRACKER_V2)
|
|
#define NUM_PA_POINTS 22
|
|
#define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 12, 11, 10, 9, 8, 7
|
|
#elif defined(HELTEC_MESH_NODE_T096)
|
|
#define NUM_PA_POINTS 22
|
|
#define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 11, 10, 9, 8, 7
|
|
#elif defined(HELTEC_V4_R8)
|
|
#define NUM_PA_POINTS 22
|
|
#define TX_GAIN_LORA 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 12, 12, 11, 11, 10, 9, 8, 7
|
|
#else
|
|
// If a board enables USE_KCT8103L_PA but does not match a known variant and has
|
|
// not already provided a PA curve, fail at compile time to avoid unsafe defaults.
|
|
#if !defined(NUM_PA_POINTS) || !defined(TX_GAIN_LORA)
|
|
#error "USE_KCT8103L_PA is defined, but no PA gain curve (NUM_PA_POINTS / TX_GAIN_LORA) is configured for this board."
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef USE_KCT8103L_PA_ONLY
|
|
#if defined(HELTEC_MESH_TOWER_V2)
|
|
#define NUM_PA_POINTS 22
|
|
#define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 10, 10, 10, 10, 10, 10, 10, 9, 8, 7
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef RAK13302
|
|
#define NUM_PA_POINTS 22
|
|
#define TX_GAIN_LORA 7, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 8
|
|
#endif
|
|
|
|
#ifdef SEEED_WIO_TRACKER_L1_PRO_1W
|
|
// Indexed by SX1262 output power in dBm, matching RadioInterface::limitPower().
|
|
// TODO: verify against measured output.
|
|
#define NUM_PA_POINTS 22
|
|
#define TX_GAIN_LORA 10, 10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10
|
|
#endif
|
|
|
|
// Default system gain to 0 if not defined
|
|
#ifndef NUM_PA_POINTS
|
|
#define NUM_PA_POINTS 1
|
|
#endif
|
|
|
|
#ifndef TX_GAIN_LORA
|
|
#define TX_GAIN_LORA 0
|
|
#endif
|
|
|
|
#ifndef HAS_LORA_FEM
|
|
#define HAS_LORA_FEM 0
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Feature toggles
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// Disable use of the NTP library and related features
|
|
// #define DISABLE_NTP
|
|
|
|
// Disable the welcome screen and allow
|
|
// #define DISABLE_WELCOME_UNSET
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// OLED & Input
|
|
// -----------------------------------------------------------------------------
|
|
#define SSD1306_ADDRESS_L 0x3C // Addr = 0
|
|
#define SSD1306_ADDRESS_H 0x3D // Addr = 1
|
|
|
|
#if (defined(SEEED_WIO_TRACKER_L1) || defined(SEEED_WIO_TRACKER_L1_PRO_1W)) && !defined(SEEED_WIO_TRACKER_L1_EINK)
|
|
#define SSD1306_ADDRESS SSD1306_ADDRESS_H
|
|
#define USE_SH1106
|
|
#endif
|
|
#define ST7567_ADDRESS 0x3F
|
|
|
|
// The SH1106 controller is almost, but not quite, the same as SSD1306
|
|
// Define this if you know you have that controller or your "SSD1306" misbehaves.
|
|
// #define USE_SH1106
|
|
|
|
// Define if screen should be mirrored left to right
|
|
// #define SCREEN_MIRROR
|
|
|
|
// I2C Keyboards (M5Stack, RAK14004, T-Deck, T-Deck Pro, T-Lora Pager, CardKB, BBQ10, MPR121, TCA8418)
|
|
#define CARDKB_ADDR 0x5F
|
|
#define TDECK_KB_ADDR 0x55
|
|
#define BBQ10_KB_ADDR 0x1F
|
|
#define MPR121_KB_ADDR 0x5A
|
|
#define TCA8418_KB_ADDR 0x34
|
|
#define TSTC8_KB_V1_ADDR 0x6C // STC8H companion-MCU keypad on the ThinkNode-M9 V1
|
|
#define TSTC8_KB_V2_ADDR 0x6D // STC8H companion-MCU keypad on the ThinkNode-M9 V2
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// SENSOR
|
|
// -----------------------------------------------------------------------------
|
|
#define BME_ADDR 0x76
|
|
#define BME_ADDR_ALTERNATE 0x77
|
|
#define MCP9808_ADDR 0x18
|
|
#define INA_ADDR 0x40 // same as SHT2X
|
|
#define INA_ADDR_ALTERNATE 0x41
|
|
#define INA_ADDR_WAVESHARE_UPS 0x43
|
|
#define INA3221_ADDR 0x42
|
|
#define MAX1704X_ADDR 0x36
|
|
#define QMC6310U_ADDR 0x1C
|
|
#define QMI8658_ADDR 0x6B
|
|
#define QMC5883L_ADDR 0x0D
|
|
#define HMC5883L_ADDR 0x1E
|
|
#define MMC5983MA_ADDR 0x30
|
|
#define QMC6309_ADDR 0x7C
|
|
#define SHTC3_ADDR 0x70
|
|
#define LPS22HB_ADDR 0x5C
|
|
#define LPS22HB_ADDR_ALT 0x5D
|
|
#define SFA30_ADDR 0x5D
|
|
#define SHTXX_ADDR 0x44
|
|
#define SHTXX_ADDR_ALT 0x45
|
|
#define PMSA003I_ADDR 0x12
|
|
#define QMA6100P_ADDR 0x12
|
|
#define AHT10_ADDR 0x38
|
|
#define RCWL9620_ADDR 0x57
|
|
#define VEML7700_ADDR 0x10
|
|
#define TSL25911_ADDR 0x29
|
|
#define OPT3001_ADDR 0x45
|
|
#define OPT3001_ADDR_ALT 0x44
|
|
#define MLX90632_ADDR 0x3A
|
|
#define DFROBOT_LARK_ADDR 0x42
|
|
#define DFROBOT_RAIN_ADDR 0x1d
|
|
#define NAU7802_ADDR 0x2A
|
|
#define MAX30102_ADDR 0x57
|
|
#define SCD4X_ADDR 0x62
|
|
#define CW2015_ADDR 0x62
|
|
#define MLX90614_ADDR_DEF 0x5A
|
|
#define CGRADSENS_ADDR 0x66
|
|
#define LTR390UV_ADDR 0x53
|
|
#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418_KB
|
|
#define PCT2075_ADDR 0x37
|
|
#define BQ27220_ADDR 0x55 // same address as TDECK_KB
|
|
#define BQ25896_ADDR 0x6B
|
|
#define LTR553ALS_ADDR 0x23
|
|
#define SEN5X_ADDR 0x69
|
|
#define SEN6X_ADDR 0x6B // same as QMI8658_ADDR and BQ25896_ADDR
|
|
#define SCD30_ADDR 0x61
|
|
#define ADS1X15_ADDR 0x48
|
|
#define ADS1X15_ADDR_ALT1 0x49
|
|
#define ADS1X15_ADDR_ALT2 0x4A
|
|
#define ADS1X15_ADDR_ALT3 0x4B
|
|
#define DS248X_ADDR 0x18 // same as MCP9808_ADDR, STK8BXX_ADDR and LIS3DH_ADDR
|
|
#define DS248X_ADDR_ALT1 0x19 // same as LIS3DH_ADDR_ALT and BMA423_ADDR
|
|
#define DS248X_ADDR_ALT2 0x1A // same as CST328_ADDR
|
|
#define DS248X_ADDR_ALT3 0x1B
|
|
#define DS248X_ADDR_ALT4 0x1C // same as QMC6310U_ADDR
|
|
#define DS248X_ADDR_ALT5 0x1D // same as DFROBOT_RAIN_ADDR
|
|
#define DS248X_ADDR_ALT6 0x1E // same as HMC5883L_ADDR
|
|
#define DS248X_ADDR_ALT7 0x1F // same as BBQ10_KB_ADDR
|
|
#define HM330X_ADDR 0x40
|
|
#define AS3935_ADDR 0x03 // both address pins tied high, the common breakout-board default
|
|
#define AS3935_ADDR_ALT 0x01
|
|
#define AS3935_ADDR_ALT2 0x02
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// ACCELEROMETER
|
|
// -----------------------------------------------------------------------------
|
|
#define MPU6050_ADDR 0x68
|
|
#define STK8BXX_ADDR 0x18
|
|
#define LIS3DH_ADDR 0x18
|
|
#define LIS3DH_ADDR_ALT 0x19
|
|
#define BMA423_ADDR 0x19
|
|
#define LSM6DS3_ADDR 0x6A
|
|
#define BMX160_ADDR 0x69
|
|
#define ICM20948_ADDR 0x69
|
|
#define ICM20948_ADDR_ALT 0x68
|
|
#define BHI260AP_ADDR 0x28
|
|
#define BMM150_ADDR 0x13
|
|
#define DA217_ADDR 0x26
|
|
#define BMI270_ADDR 0x68
|
|
#define BMI270_ADDR_ALT 0x69
|
|
#define ICM42607P_ADDR 0x68
|
|
#define ICM42607P_ADDR_ALT 0x69
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// LED
|
|
// -----------------------------------------------------------------------------
|
|
#define NCP5623_ADDR 0x38
|
|
#define LP5562_ADDR 0x30
|
|
#define LP5814_ADDR 0x2C
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Audio Codec
|
|
// -----------------------------------------------------------------------------
|
|
#if not __has_include("Codecs/es8311/ES8311.h")
|
|
#define ES8311_ADDR 0x18 // same address as MCP9808_ADDR / STK8BXX_ADDR / LIS3DH_ADDR
|
|
#endif
|
|
#define ES7243E_ADDR 0x14
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Security
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// IO Expander
|
|
// -----------------------------------------------------------------------------
|
|
#define TCA9535_ADDR 0x20
|
|
#define TCA9555_ADDR 0x26
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Touchscreen
|
|
// -----------------------------------------------------------------------------
|
|
#define FT6336U_ADDR 0x48 // same address as ADS1115
|
|
#define CST328_ADDR 0x1A // same address as CST226SE
|
|
#define CHSC6X_ADDR 0x2E
|
|
#define CST226SE_ADDR_ALT 0x5A
|
|
#define GT911_ADDR 0x5D // same address as SFA30_ADDR / LPS22HB_ADDR_ALT
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
|
|
// - the default i2c address for this sensor is 0x20, and users are instructed to
|
|
// set 0x21 and 0x22 for the second and third sensor if present.
|
|
// -----------------------------------------------------------------------------
|
|
#define RAK120351_ADDR 0x20
|
|
#define RAK120352_ADDR 0x21
|
|
#define RAK120353_ADDR 0x22
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// BIAS-T Generator
|
|
// -----------------------------------------------------------------------------
|
|
#define TPS65233_ADDR 0x60
|
|
|
|
// convert 24-bit color to 16-bit (56K)
|
|
#define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
|
|
|
|
#if defined(VEXT_ENABLE) && !defined(VEXT_ON_VALUE)
|
|
// Older variant.h files might not be defining this value, so stay with the old default
|
|
#define VEXT_ON_VALUE LOW
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Rotary encoder
|
|
// -----------------------------------------------------------------------------
|
|
#ifndef ROTARY_DELAY
|
|
#define ROTARY_DELAY 5
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// GPS
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef GPS_BAUDRATE
|
|
#define GPS_BAUDRATE 9600
|
|
#define GPS_BAUDRATE_FIXED 0
|
|
#else
|
|
#define GPS_BAUDRATE_FIXED 1
|
|
#endif
|
|
|
|
#ifndef GPS_THREAD_INTERVAL
|
|
#define GPS_THREAD_INTERVAL 200
|
|
#endif
|
|
|
|
/* Step #2: follow with defines common to the architecture;
|
|
also enable HAS_ option not specifically disabled by variant.h */
|
|
#include "architecture.h"
|
|
|
|
#ifndef DEFAULT_REBOOT_SECONDS
|
|
#define DEFAULT_REBOOT_SECONDS 7
|
|
#endif
|
|
|
|
#ifndef DEFAULT_SHUTDOWN_SECONDS
|
|
#define DEFAULT_SHUTDOWN_SECONDS 2
|
|
#endif
|
|
|
|
#ifndef MINIMUM_SAFE_FREE_HEAP
|
|
#define MINIMUM_SAFE_FREE_HEAP 1500
|
|
#endif
|
|
|
|
#ifndef WIRE_INTERFACES_COUNT
|
|
// Officially an NRF52 macro
|
|
// Repurposed cross-platform to identify devices using Wire1
|
|
// The SenseCAP Indicator has a second bus bridged to the RP2040 (I2CProxy)
|
|
#if defined(I2C_SDA1) || defined(PIN_WIRE1_SDA) || defined(SENSECAP_INDICATOR)
|
|
#define WIRE_INTERFACES_COUNT 2
|
|
#elif HAS_WIRE
|
|
#define WIRE_INTERFACES_COUNT 1
|
|
#endif
|
|
#endif
|
|
|
|
/* Step #3: mop up with disabled values for HAS_ options not handled by the above two */
|
|
|
|
#ifndef HAS_WIFI
|
|
#define HAS_WIFI 0
|
|
#endif
|
|
#ifndef HAS_ETHERNET
|
|
#define HAS_ETHERNET 0
|
|
#endif
|
|
#if (defined(USE_WS5500) || defined(USE_CH390D)) && !HAS_ETHERNET
|
|
#error "USE_WS5500 and USE_CH390D require HAS_ETHERNET"
|
|
#endif
|
|
#ifndef HAS_SCREEN
|
|
#define HAS_SCREEN 0
|
|
#endif
|
|
#ifndef HAS_TFT
|
|
#define HAS_TFT 0
|
|
#endif
|
|
// Opt-in: build the BaseUI games frame (Snake). Off by default; enable per build/variant with
|
|
// -DBASEUI_HAS_GAMES=1 (requires HAS_SCREEN and a non-color BaseUI display).
|
|
#ifndef BASEUI_HAS_GAMES
|
|
#define BASEUI_HAS_GAMES 0
|
|
#endif
|
|
#ifndef HAS_WIRE
|
|
#define HAS_WIRE 0
|
|
#endif
|
|
#ifndef HAS_GPS
|
|
#define HAS_GPS 0
|
|
#endif
|
|
#ifndef HAS_BUTTON
|
|
#define HAS_BUTTON 0
|
|
#endif
|
|
#ifndef HAS_TRACKBALL
|
|
#define HAS_TRACKBALL 0
|
|
#endif
|
|
#ifndef HAS_TOUCHSCREEN
|
|
#define HAS_TOUCHSCREEN 0
|
|
#endif
|
|
#ifndef HAS_TELEMETRY
|
|
#define HAS_TELEMETRY 0
|
|
#endif
|
|
#ifndef HAS_SENSOR
|
|
#define HAS_SENSOR 0
|
|
#endif
|
|
#ifndef HAS_RADIO
|
|
#define HAS_RADIO 0
|
|
#endif
|
|
#ifndef HAS_CPU_SHUTDOWN
|
|
#define HAS_CPU_SHUTDOWN 0
|
|
#endif
|
|
#ifndef HAS_BLUETOOTH
|
|
#define HAS_BLUETOOTH 0
|
|
#endif
|
|
#ifndef USE_TFTDISPLAY
|
|
#define USE_TFTDISPLAY 0
|
|
#endif
|
|
|
|
#ifndef HW_VENDOR
|
|
#error HW_VENDOR must be defined
|
|
#endif
|
|
|
|
#ifndef TB_DOWN
|
|
#define TB_DOWN 255
|
|
#endif
|
|
#ifndef TB_UP
|
|
#define TB_UP 255
|
|
#endif
|
|
#ifndef TB_LEFT
|
|
#define TB_LEFT 255
|
|
#endif
|
|
#ifndef TB_RIGHT
|
|
#define TB_RIGHT 255
|
|
#endif
|
|
#ifndef TB_PRESS
|
|
#define TB_PRESS 255
|
|
#endif
|
|
|
|
// Support multiple RGB LED configuration
|
|
#if defined(HAS_NCP5623) || defined(HAS_LP5562) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
|
|
#define HAS_RGB_LED
|
|
#endif
|
|
|
|
#ifndef LED_STATE_ON
|
|
#define LED_STATE_ON 1
|
|
#endif
|
|
#ifndef LED_STATE_OFF
|
|
#define LED_STATE_OFF (LED_STATE_ON ^ 1)
|
|
#endif
|
|
|
|
#ifndef ledOff
|
|
#define ledOff(pin) pinMode(pin, INPUT)
|
|
#endif
|
|
|
|
// default mapping of pins
|
|
#if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
|
|
#define ALT_BUTTON_PIN PIN_BUTTON2
|
|
#endif
|
|
#if defined ALT_BUTTON_PIN
|
|
|
|
#ifndef ALT_BUTTON_ACTIVE_LOW
|
|
#define ALT_BUTTON_ACTIVE_LOW true
|
|
#endif
|
|
#ifndef ALT_BUTTON_ACTIVE_PULLUP
|
|
#define ALT_BUTTON_ACTIVE_PULLUP true
|
|
#endif
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Global switches to turn off features for a minimized build
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// #define MESHTASTIC_MINIMIZE_BUILD 1
|
|
#ifdef MESHTASTIC_MINIMIZE_BUILD
|
|
#define MESHTASTIC_EXCLUDE_MODULES 1
|
|
#define MESHTASTIC_EXCLUDE_WIFI 1
|
|
#define MESHTASTIC_EXCLUDE_BLUETOOTH 1
|
|
#define MESHTASTIC_EXCLUDE_GPS 1
|
|
#define MESHTASTIC_EXCLUDE_SCREEN 1
|
|
#define MESHTASTIC_EXCLUDE_MQTT 1
|
|
#define MESHTASTIC_EXCLUDE_POWERMON 1
|
|
#define MESHTASTIC_EXCLUDE_I2C 1
|
|
#define MESHTASTIC_EXCLUDE_PKI 1
|
|
#define MESHTASTIC_EXCLUDE_POWER_FSM 1
|
|
#define MESHTASTIC_EXCLUDE_TZ 1
|
|
#define MESHTASTIC_EXCLUDE_PKT_HISTORY_HASH 1
|
|
#endif
|
|
|
|
// Turn off all optional modules
|
|
#ifdef MESHTASTIC_EXCLUDE_MODULES
|
|
#define MESHTASTIC_EXCLUDE_AUDIO 1
|
|
#define MESHTASTIC_EXCLUDE_DETECTIONSENSOR 1
|
|
#define MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR 1
|
|
#define MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR 1
|
|
#define MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY 1
|
|
#define MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION 1
|
|
#define MESHTASTIC_EXCLUDE_PAXCOUNTER 1
|
|
#define MESHTASTIC_EXCLUDE_POWER_TELEMETRY 1
|
|
#define MESHTASTIC_EXCLUDE_RANGETEST 1
|
|
#define MESHTASTIC_EXCLUDE_REMOTEHARDWARE 1
|
|
#define MESHTASTIC_EXCLUDE_STOREFORWARD 1
|
|
#define MESHTASTIC_EXCLUDE_TEXTMESSAGE 1
|
|
#define MESHTASTIC_EXCLUDE_TRAFFIC_MANAGEMENT 1
|
|
#define MESHTASTIC_EXCLUDE_ATAK 1
|
|
#define MESHTASTIC_EXCLUDE_CANNEDMESSAGES 1
|
|
#define MESHTASTIC_EXCLUDE_NEIGHBORINFO 1
|
|
#define MESHTASTIC_EXCLUDE_TRACEROUTE 1
|
|
#define MESHTASTIC_EXCLUDE_WAYPOINT 1
|
|
#define MESHTASTIC_EXCLUDE_INPUTBROKER 1
|
|
#define MESHTASTIC_EXCLUDE_SERIAL 1
|
|
#define MESHTASTIC_EXCLUDE_POWERSTRESS 1
|
|
#define MESHTASTIC_EXCLUDE_ADMIN 1
|
|
#endif
|
|
|
|
// Store & Forward is implemented only for ESP32 and Portduino
|
|
#if !defined(ARCH_ESP32) && !defined(ARCH_PORTDUINO) && !defined(MESHTASTIC_EXCLUDE_STOREFORWARD)
|
|
#define MESHTASTIC_EXCLUDE_STOREFORWARD 1
|
|
#endif
|
|
|
|
// Turn off wifi even if HW supports wifi (webserver relies on wifi and is also disabled)
|
|
#ifdef MESHTASTIC_EXCLUDE_WIFI
|
|
#define MESHTASTIC_EXCLUDE_WEBSERVER 1
|
|
#undef HAS_WIFI
|
|
#define HAS_WIFI 0
|
|
#endif
|
|
|
|
// Allow code that needs internet to just check HAS_NETWORKING rather than HAS_WIFI || HAS_ETHERNET
|
|
#define HAS_NETWORKING (HAS_WIFI || HAS_ETHERNET)
|
|
|
|
// // Turn off Bluetooth
|
|
#ifdef MESHTASTIC_EXCLUDE_BLUETOOTH
|
|
#undef HAS_BLUETOOTH
|
|
#define HAS_BLUETOOTH 0
|
|
#endif
|
|
|
|
// // Turn off GPS
|
|
#ifdef MESHTASTIC_EXCLUDE_GPS
|
|
#undef HAS_GPS
|
|
#define HAS_GPS 0
|
|
#undef MESHTASTIC_EXCLUDE_RANGETEST
|
|
#define MESHTASTIC_EXCLUDE_RANGETEST 1
|
|
#endif
|
|
|
|
// Turn off Screen
|
|
#ifdef MESHTASTIC_EXCLUDE_SCREEN
|
|
#undef HAS_SCREEN
|
|
#define HAS_SCREEN 0
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Motion sensor wake
|
|
// -----------------------------------------------------------------------------
|
|
|
|
/* The motion driver that owns this pin attaches the ISR. sleep.cpp reuses it as a
|
|
light-sleep wake source and PowerFSM attributes the resulting GPIO wake to motion.
|
|
Must stay below the exclusion cascade: MESHTASTIC_MINIMIZE_BUILD derives
|
|
MESHTASTIC_EXCLUDE_I2C above, and no motion driver is built when it is set. */
|
|
#if !MESHTASTIC_EXCLUDE_I2C
|
|
#if defined(BMA4XX_INT) && defined(HAS_BMA423)
|
|
#define MOTION_WAKE_INT_PIN BMA4XX_INT
|
|
#define MOTION_WAKE_INT_ACTIVE_HIGH 1
|
|
#elif defined(BHI260AP_INT) && defined(HAS_BHI260AP)
|
|
#define MOTION_WAKE_INT_PIN BHI260AP_INT
|
|
#define MOTION_WAKE_INT_ACTIVE_HIGH 1
|
|
#elif defined(STK8XXX_INT) && defined(HAS_STK8XXX)
|
|
#define MOTION_WAKE_INT_PIN STK8XXX_INT
|
|
#define MOTION_WAKE_INT_ACTIVE_HIGH 1
|
|
#elif defined(ICM_20948_INT_PIN) && defined(HAS_ICM20948)
|
|
#define MOTION_WAKE_INT_PIN ICM_20948_INT_PIN
|
|
#define MOTION_WAKE_INT_ACTIVE_HIGH 0
|
|
#elif defined(QMA_6100P_INT_PIN) && defined(HAS_QMA6100P)
|
|
#define MOTION_WAKE_INT_PIN QMA_6100P_INT_PIN
|
|
#define MOTION_WAKE_INT_ACTIVE_HIGH 0
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef USE_ETHERNET_DEFAULT
|
|
#define USE_ETHERNET_DEFAULT 0
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// MESHTASTIC_LOCKDOWN - runtime, client-toggleable hardening (nRF52 only)
|
|
//
|
|
// Lockdown/protect support is opt-in at build time. Builds that need it pass
|
|
// -DMESHTASTIC_ENABLE_LOCKDOWN=1. When enabled on nRF52 (CC310 hardware
|
|
// crypto), whether it is ACTIVE is decided entirely at runtime by
|
|
// EncryptedStorage::isLockdownActive()
|
|
// (== a passphrase has been provisioned, i.e. /prefs/.dek exists). A device
|
|
// that has never been provisioned - or that the operator disabled from the
|
|
// client app - behaves exactly like stock firmware: plaintext storage, no
|
|
// redaction, normal logging, normal display.
|
|
//
|
|
// The operator toggles lockdown from the client app:
|
|
// off -> on : provision a passphrase (AdminMessage.lockdown_auth). The
|
|
// firmware generates a DEK, encrypts the stored config, and
|
|
// authorizes the connection.
|
|
// on -> off : AdminMessage.lockdown_auth { disable=true } with the
|
|
// passphrase - decrypts storage back to plaintext and removes
|
|
// the DEK / token / monotonic-counter / backoff files, then
|
|
// reboots into normal mode. APPROTECT is the one thing that
|
|
// does NOT revert (see below).
|
|
//
|
|
// MESHTASTIC_LOCKDOWN here is an INTERNAL capability marker. It gates the UI
|
|
// bits (lock screen, pairing-PIN handling). Flash-constrained nRF52 variants
|
|
// that genuinely cannot afford the ~tens-of-KB of crypto + access-control code
|
|
// may also opt out with -DMESHTASTIC_EXCLUDE_LOCKDOWN=1.
|
|
//
|
|
// MESHTASTIC_PHONEAPI_ACCESS_CONTROL - per-connection auth + redaction,
|
|
// gated at runtime on isLockdownActive()
|
|
// MESHTASTIC_ENCRYPTED_STORAGE - AES-128-CTR + HMAC-SHA256 at-rest
|
|
// MESHTASTIC_ENABLE_APPROTECT - UICR APPROTECT capability. The actual
|
|
// one-way burn happens at runtime, only
|
|
// once provisioned, only on non-vulnerable
|
|
// silicon, and is STICKY: disabling
|
|
// lockdown does NOT (cannot) reverse it.
|
|
//
|
|
// DEBUG_MUTE is intentionally NOT coupled to lockdown - a capable-but-off
|
|
// device must log normally. Define DEBUG_MUTE separately for a silent build.
|
|
//
|
|
// -DMESHTASTIC_LOCKDOWN_DEBUG=1 keeps the irreversible APPROTECT burn disabled
|
|
// even when provisioned - for development so dev boards never lose SWD.
|
|
// -----------------------------------------------------------------------------
|
|
#if defined(ARCH_NRF52)
|
|
#ifndef MESHTASTIC_ENABLE_LOCKDOWN
|
|
#define MESHTASTIC_ENABLE_LOCKDOWN 0
|
|
#endif
|
|
|
|
#if !MESHTASTIC_ENABLE_LOCKDOWN
|
|
#undef MESHTASTIC_LOCKDOWN
|
|
#undef MESHTASTIC_PHONEAPI_ACCESS_CONTROL
|
|
#undef MESHTASTIC_ENCRYPTED_STORAGE
|
|
#undef MESHTASTIC_ENABLE_APPROTECT
|
|
#ifndef MESHTASTIC_EXCLUDE_LOCKDOWN
|
|
#define MESHTASTIC_EXCLUDE_LOCKDOWN 1
|
|
#endif
|
|
#endif
|
|
|
|
#if MESHTASTIC_ENABLE_LOCKDOWN && !defined(MESHTASTIC_EXCLUDE_LOCKDOWN)
|
|
#define MESHTASTIC_LOCKDOWN 1
|
|
#define MESHTASTIC_PHONEAPI_ACCESS_CONTROL 1
|
|
#define MESHTASTIC_ENCRYPTED_STORAGE 1
|
|
#ifndef MESHTASTIC_LOCKDOWN_DEBUG
|
|
#define MESHTASTIC_ENABLE_APPROTECT 1
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef MESHTASTIC_LOCKDOWN
|
|
|
|
// Per-boot uptime cap on unlocked sessions. 0 = unlimited (token-only
|
|
// enforcement, the existing behavior). When non-zero, every passphrase
|
|
// unlock (and every token-auto-unlock that inherits the value) arms a
|
|
// timer; on expiry the device lockNow()s and reboots into locked state.
|
|
// Bounds the total exposure window to bootsRemaining * this value if an
|
|
// attacker has physical possession but not the passphrase.
|
|
//
|
|
// Override at build time. Suggested:
|
|
// carry device: 3600 (1h sessions, periodic re-auth from phone)
|
|
// tower / infra node: 0 (default - relies on token TTLs only)
|
|
//
|
|
// A future LockdownAuth.max_session_seconds proto field will let the
|
|
// client set this per-token; until that lands the build-time value is
|
|
// the only source.
|
|
#ifndef MESHTASTIC_LOCKDOWN_SESSION_DEFAULT_SECONDS
|
|
#define MESHTASTIC_LOCKDOWN_SESSION_DEFAULT_SECONDS 0
|
|
#endif
|
|
|
|
#endif // MESHTASTIC_LOCKDOWN
|
|
|
|
#include "DebugConfiguration.h"
|
|
#include "RF95Configuration.h"
|