mirror of
https://github.com/meshtastic/firmware.git
synced 2026-08-01 10:58:30 -04:00
597f6767b5
* Add Elecrow ThinkNode M8 variant scaffold (thinknode_m8) nRF52840 + SX1262 + 2.4" e-paper + ATGM336H-5NR32 GPS. All pins resolved from ThinkNode_M8_V0.3.sch; cross-checked against meshtastic/firmware#9181 (Elecrow V0.1 reference). Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Add Elecrow ThinkNode M8 board support (nRF52840/SX1262, 1.54in e-ink, ATGM336H GNSS, SC7A20, EC04 encoder) * Address review: keep the stored backlight level out of blanking, match only the SC7A20 WHO_AM_I byte, and transfer detents atomically * Use std::atomic for the press-and-turn detent counter so native builds compile * Drop the ThinkNode M8 LED_BUILTIN redefinition that warned on every translation unit --------- Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
54 lines
1.3 KiB
JSON
54 lines
1.3 KiB
JSON
{
|
|
"build": {
|
|
"arduino": {
|
|
"ldscript": "nrf52840_s140_v6.ld"
|
|
},
|
|
"core": "nRF5",
|
|
"cpu": "cortex-m4",
|
|
"extra_flags": "-DARDUINO_NRF52840_ThinkNode_M8 -DNRF52840_XXAA",
|
|
"f_cpu": "64000000L",
|
|
"hwids": [
|
|
["0x239A", "0x4405"],
|
|
["0x239A", "0x0029"],
|
|
["0x239A", "0x002A"]
|
|
],
|
|
"usb_product": "elecrow_thinknode_m8",
|
|
"mcu": "nrf52840",
|
|
"variant": "ELECROW-ThinkNode-M8",
|
|
"variants_dir": "variants",
|
|
"bsp": {
|
|
"name": "adafruit"
|
|
},
|
|
"softdevice": {
|
|
"sd_flags": "-DS140",
|
|
"sd_name": "s140",
|
|
"sd_version": "6.1.1",
|
|
"sd_fwid": "0x00B6"
|
|
},
|
|
"bootloader": {
|
|
"settings_addr": "0xFF000"
|
|
}
|
|
},
|
|
"connectivity": ["bluetooth"],
|
|
"debug": {
|
|
"jlink_device": "nRF52840_xxAA",
|
|
"onboard_tools": ["jlink"],
|
|
"svd_path": "nrf52840.svd",
|
|
"openocd_target": "nrf52840-mdk-rs"
|
|
},
|
|
"frameworks": ["arduino"],
|
|
"name": "elecrow thinknode m8",
|
|
"upload": {
|
|
"maximum_ram_size": 248832,
|
|
"maximum_size": 815104,
|
|
"speed": 115200,
|
|
"protocol": "nrfutil",
|
|
"protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
|
|
"use_1200bps_touch": true,
|
|
"require_upload_port": true,
|
|
"wait_for_upload_port": true
|
|
},
|
|
"url": "",
|
|
"vendor": "ELECROW"
|
|
}
|