Files
firmware/src/graphics/draw/DebugRenderer.cpp
Nasimovy 1523368c53 adding support for the ST7796 + creating a new variant of the T-beam (#6575)
* remove duplicate HAS_LP5562  introduced by #6422

* add ST7796

* changes to get display centered+lib update

* seperated from tbeam

* forgot the simple scan case

* lowered speeds to 1/4

* added SPI Speed to constructor+ cleaned up variant.h

* even slower speeds....

* add ST7796

* changes to get display centered+lib update

* seperated from tbeam

* forgot the simple scan case

* lowered speeds to 1/4

* added SPI Speed to constructor+ cleaned up variant.h

* even slower speeds....

* changed variant name to tbeam-displayshield

* modified variant.h and merged ini file+testing on lower spi frequency for the lora module, display shield pumps out EMI?

* try higher speeds + HSPI

* cleanup of redundant code

* refelct changes?

* trunk fmt

* testing touchscreen code

* further testing

* changed to sensorlib 0.3.1

* i broke it , dont know how to fix at the moment will investigate

* add -1 functionality for touch IRQ

* revert to working example?

* it works.... is pressed was not working properly

* working touchscreen but gestures not moving display

* swap XY+ mirror X

* cleanup + addition of  defines for on screen keyboard and canned message module

* removed debug lines, disabled bluetooth for now because of stack smashing protect failure

* reverted the revert #6640 + increased speed, bleutooth is stable now on reconnection cold booth etc , GPS is still not working though

* remove debug + add fixed baudrate for gps

* fmt

* revert NIMble

* changed display library to meshtastic org

* removed baudrate of 115200 and some commented out code

* Correct spelling

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Typo

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* display speed x10

* resolve conflicts

* undo

* revert speed increase CPU

* add SCREEN_TRANSITION_FRAMERATE 5

* spi speed increase of the display

* using the original touchscreen implementation

* removal of H file line

* add USE_ST7796 to missing places

* removed is pressed + interrupt

* revert changes of settings.json

* update to screen.cpp

* test identification of CST226 and CST328

* Update src/configuration.h

typo

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* made changes to detection because it was completely wrong, CST226SE has 2 posible adresses

* add merge queue

* try vars

* kerning in yaml.

* update comment

* lint etc

* touching to check grandfathering

* explicit ignores

* add WIP for Unit C6L (#7433)

* add WIP for Unit C6L
* adapt to new config structure
* Add c6l BLE and screen support (#7991)
* Minor c6l fix
* Move out of PRIVATE_HW
---------
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <Xaositek@users.noreply.github.com>
Co-authored-by: Markus <Links2004@users.noreply.github.com>

* Update Adafruit BusIO to v1.17.3 (#8018)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Update actions/checkout action to v5 (#8020)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Update actions/setup-python action to v6 (#8023)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Upgrade trunk (#8025)

Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>

* Update actions/download-artifact action to v5 (#8021)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Fix init for InputEvent (#8015)

* Automated version bumps (#8028)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Allow Left / Right Events for selection and improve encoder responsives (#8016)

* Allow Left / Right Events for selection and improve encoder responsives

* add define for ROTARY_DELAY

* T-Lora Pager: Support LR1121 and SX1280 models (#7956)

* T-Lora Pager: Support LR1121 and SX1280 models

* Remove ifdefs

* (resubmission) Manual GitHub actions to allow building one target or arch (#7997)

* Reset the modified files

* Fix some changes

* Fix some changes

* Trunk. That is all.

---------

Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>

* BaseUI Show/Hide Frame Functionality (#7382)

* Rename System Frame (from Memory) in code base

* Create menu options to Show/Hide frames: Node Lists, Bearings, Position, LoRa, Clock and Favorites frames

* Move Region Picker into submenu

* Tweak wording for Send Position vs Node Info if the device has GPS

* Update actions/checkout action to v5 (#8031)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Update actions/download-artifact action to v5 (#8032)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Update actions/setup-python action to v6 (#8033)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Phone GPS display on Position Screen for BaseUI (#7875)

* Phone GPS display on Position Screen

This is a PR to show when a phone shares GPS location with the node so you can reliably know what coordinate is being shared with the Mesh.

* Merge pull request #8004 from compumike/compumike/debug-heap-add-free-heap-debugging-to-all-log-lines

When `DEBUG_HEAP` is defined, add free heap bytes to every log line in `RedirectablePrint::log_to_serial`

* Feature: Seamless Cross-Preset Communication via UDP Multicast Bridging (#7753)

* Added compatibility between nodes on different Presets through `Mesh via UDP`

* Optimize multicast handling and channel mapping

- FloodingRouter: remove redundant UDP-encrypted rebroadcast suppression.
- Router: guard multicast fallback with HAS_UDP_MULTICAST and map fallback-decoded packets
  to the local default channel via isDefaultChannel()
- UdpMulticastHandler: set transport_mechanism only after successful decode

* trunk fmt

* Move setting transport mechanism.

---------

Co-authored-by: GUVWAF <thijs@havinga.eu>

* Auto-favorite remote admin node

* Merge pull request #7873 from compumike/compumike/client-base-role

Add `CLIENT_BASE` role: `ROUTER` for favorites, `CLIENT` otherwise (for attic/roof nodes!)

* Fixes

* BaseUI Updates (#7787)

* Account for low resolution wide screen OLEDs

* Allow picking of Device Role and new Display Formatter for Device Role

* Add remainder of client roles to display formatter

* Don't update the role unless you pick a value

* Mascots are fun

* Fix warnings during compile time

* Improve some menus

* Mascots need to work everywhere

* Update Chirpy image

* Fix Trunk

* Update protobufs

* Add date to Clock screen

* Analog clocks love dates too

* Finalize date moves for analog clock

* Added Last Coordinate counter to Position screen (#7865)

Adding a counter to show the last time a GPS coordinate was detected to ensure the user is aware how long since the coordinate updated or to identify any errors.

* Fix

* Portduino config refactor (#7796)

* Start portduino_config refactor

* refactor GPIOs to new portduino_config

* More portduino_config work

* More conversion to portduino_config

* Finish portduino_config transition

* trunk

* yaml output work

* Simplify the GPIO config

* Trunk

* updated shebang to use a more standard path for bash (#7922)

Signed-off-by: Trenton VanderWert <trenton.vanderwert@gmail.com>

* Show GPS Date properly in drawCommonHeader (#7887)

* Commit good code that is sustainable

* Fix new build errors

* BaseUI Updates (#7787)

* Account for low resolution wide screen OLEDs

* Allow picking of Device Role and new Display Formatter for Device Role

* Add remainder of client roles to display formatter

* Don't update the role unless you pick a value

* Mascots are fun

* Fix warnings during compile time

* Improve some menus

* Mascots need to work everywhere

* Update Chirpy image

* Fix Trunk

* Update protobufs

* Add date to Clock screen

* Analog clocks love dates too

* Finalize date moves for analog clock

* Add formatting and menu picking for other GPS format options (#7974)

* Add back options for other GPS format options

* Rename variables and don't overlap elements

* Fix default value

* Should probably add a menu while I'm here!

* Shorten names just a bit to fit on screens

* Fix off by one

* Labels try to make things better

* Missed a label

* Update protobufs (#8038)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Add formatting and menu picking for other GPS format options (#7974)

* Add back options for other GPS format options

* Rename variables and don't overlap elements

* Fix default value

* Should probably add a menu while I'm here!

* Shorten names just a bit to fit on screens

* Fix off by one

* Labels try to make things better

* Missed a label

* Add a new GPS model CM121. (#7852)

* Add a new GPS model CM121.

* Add CM121 to Unicore.

* Trunk fixes, remove unneded NMEA lines

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>

* (resubmission) Manual GitHub actions to allow building one target or arch (#7997)

* Reset the modified files

* Fix some changes

* Fix some changes

* Trunk. That is all.

---------

Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>

* PPA: Enable Ubuntu 25.10 (questing) (#7940)

* Update Protobuf usage, add MLS, fix clock (#8041)

* Update protobufs (#8045)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Fix icon

* C6l fixes (#8047)

* fix build with HAS_TELEMETRY 0 (#8051)

* Make sure to ACK ACKs/replies if next-hop routing is used (#8052)

* Make sure to ACK ACKs/replies if next-hop routing is used
To stop their retransmissions; hop limit of 0 is enough

* Update src/mesh/ReliableRouter.cpp

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* move HTTP contentTypes to Flash - saves 768 Bytes of RAM (#8055)

* Use `lora.use_preset` config to get name (#8057)

* Update RadioLib to v7.3.0 (#8065)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Fix Rotary Encoder Button (#8001)

this fixes the Rotary Encoder Button, currenlty its not working at all.
Currently the action `ROTARY_ACTION_PRESSED` is only triggerd with a IRQ on RISING, which results in nothing since the function detects the "not longer" pressed button --> no action.

the `ROTARY_ACTION_PRESSED` implementation needs to be called on both edges (on press and release of the button)

changing the interupt setting to `CHANGE` fixes the problem.

* Add another seeed_xiao_nrf52840_kit build environment for I2C pinout (#8036)

* Update platformio.ini

* Remove some more extraneous lines

* Add heltec_v4 board. (#7845)

* add heltec_v4 board.

* Update variants/esp32s3/heltec_v4/platformio.ini

Co-authored-by: Austin <vidplace7@gmail.com>

* Limit the maximum output power.

* Trunk fixes

Fixes formatting to match meshtastic trunk linter.

* Apply suggestion from @Copilot

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Apply suggestion from @Copilot

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Upgrade trunk (#8078)

Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>

* portduino bump to fix gpiod bug (#8083)

An earlier portduino causes problems with initializing gpiod lines. This pulls in the fix.

* Handle ext. notification module things even if not enabled (#8089)

* tlora-pager wake on button, and kb backlight toggling (#8090)

* Try-fix: Unstick that PhoneAPI state (#8091)

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>

* Also pull a deviceID from esp32c6 devices (#8092)

* Remove line from BLE pin screen, to make pin readible on tiny screens

* Fix build errors (#8067)

* Heltec V4 is 16mb

* Clear lasttoradio on BLE disconnect (#8095)

* On disconnect, clear the lastToRadio buffer

* Move it, bucko!

* Revert "Fix build errors (#8067)"

This reverts commit d998f70b56.

* Automated version bumps (#8100)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Upgrade trunk (#8094)

Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>

* Update Adafruit BusIO to v1.17.4 (#8098)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Add three expansion screens for heltec mesh solar. (#7995)

* Add three expansion screens for heltec mesh solar.

* delete whitespace

Update variants/nrf52840/heltec_mesh_solar/variant.h

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* delete whitespace

Update variants/nrf52840/heltec_mesh_solar/platformio.ini

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

---------

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Trunk

---------

Signed-off-by: Trenton VanderWert <trenton.vanderwert@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Dane Evans <dane@goneepic.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <Xaositek@users.noreply.github.com>
Co-authored-by: Markus <Links2004@users.noreply.github.com>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
Co-authored-by: Markus <974709+Links2004@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: WillyJL <me@willyjl.dev>
Co-authored-by: Tom <116762865+NomDeTom@users.noreply.github.com>
Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Michael <michael.overhorst@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Trent V. <trenton.vanderwert@gmail.com>
Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
2025-11-27 06:18:52 -06:00

726 lines
28 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
#include "configuration.h"
#if HAS_SCREEN
#include "../Screen.h"
#include "DebugRenderer.h"
#include "FSCommon.h"
#include "MeshService.h"
#include "NodeDB.h"
#include "Throttle.h"
#include "UIRenderer.h"
#include "airtime.h"
#include "gps/RTC.h"
#include "graphics/ScreenFonts.h"
#include "graphics/SharedUIDisplay.h"
#include "graphics/TimeFormatters.h"
#include "graphics/images.h"
#include "main.h"
#include "mesh/Channels.h"
#include "mesh/generated/meshtastic/deviceonly.pb.h"
#include "sleep.h"
#if HAS_WIFI && !defined(ARCH_PORTDUINO)
#include "mesh/wifi/WiFiAPClient.h"
#include <WiFi.h>
#ifdef ARCH_ESP32
#include "mesh/wifi/WiFiAPClient.h"
#endif
#endif
#ifdef ARCH_ESP32
#include "modules/StoreForwardModule.h"
#endif
#include <DisplayFormatters.h>
#include <RadioLibInterface.h>
#include <target_specific.h>
using namespace meshtastic;
// External variables
extern graphics::Screen *screen;
extern PowerStatus *powerStatus;
extern NodeStatus *nodeStatus;
extern GPSStatus *gpsStatus;
extern Channels channels;
extern AirTime *airTime;
// External functions from Screen.cpp
extern bool heartbeat;
#ifdef ARCH_ESP32
extern StoreForwardModule *storeForwardModule;
#endif
namespace graphics
{
namespace DebugRenderer
{
void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
display->setFont(FONT_SMALL);
// The coordinates define the left starting point of the text
display->setTextAlignment(TEXT_ALIGN_LEFT);
if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
display->setColor(BLACK);
}
char channelStr[20];
snprintf(channelStr, sizeof(channelStr), "#%s", channels.getName(channels.getPrimaryIndex()));
// Display nodes status
if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
UIRenderer::drawNodes(display, x + (SCREEN_WIDTH * 0.25), y + 2, nodeStatus);
} else {
UIRenderer::drawNodes(display, x + (SCREEN_WIDTH * 0.25), y + 3, nodeStatus);
}
#if HAS_GPS
// Display GPS status
if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
UIRenderer::drawGpsPowerStatus(display, x, y + 2, gpsStatus);
} else {
if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
UIRenderer::drawGps(display, x + (SCREEN_WIDTH * 0.63), y + 2, gpsStatus);
} else {
UIRenderer::drawGps(display, x + (SCREEN_WIDTH * 0.63), y + 3, gpsStatus);
}
}
#endif
display->setColor(WHITE);
// Draw the channel name
display->drawString(x, y + FONT_HEIGHT_SMALL, channelStr);
// Draw our hardware ID to assist with bluetooth pairing. Either prefix with Info or S&F Logo
if (moduleConfig.store_forward.enabled) {
#ifdef ARCH_ESP32
if (!Throttle::isWithinTimespanMs(storeForwardModule->lastHeartbeat,
(storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) || \
defined(USE_ST7796) || \
ARCH_PORTDUINO) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
8, imgQuestionL1);
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 11 + FONT_HEIGHT_SMALL, 12,
8, imgQuestionL2);
#else
display->drawFastImage(x + SCREEN_WIDTH - 10 - display->getStringWidth(screen->ourId), y + 2 + FONT_HEIGHT_SMALL, 8,
8, imgQuestion);
#endif
} else {
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) || defined(USE_ST7796)) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
8, imgSFL1);
display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 11 + FONT_HEIGHT_SMALL, 16,
8, imgSFL2);
#else
display->drawFastImage(x + SCREEN_WIDTH - 13 - display->getStringWidth(screen->ourId), y + 2 + FONT_HEIGHT_SMALL, 11,
8, imgSF);
#endif
}
#endif
} else {
// TODO: Raspberry Pi supports more than just the one screen size
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) || \
defined(USE_ST7796) || \
ARCH_PORTDUINO) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
imgInfoL1);
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8,
imgInfoL2);
#else
display->drawFastImage(x + SCREEN_WIDTH - 10 - display->getStringWidth(screen->ourId), y + 2 + FONT_HEIGHT_SMALL, 8, 8,
imgInfo);
#endif
}
display->drawString(x + SCREEN_WIDTH - display->getStringWidth(screen->ourId), y + FONT_HEIGHT_SMALL, screen->ourId);
// Draw any log messages
display->drawLogBuffer(x, y + (FONT_HEIGHT_SMALL * 2));
/* Display a heartbeat pixel that blinks every time the frame is redrawn */
#ifdef SHOW_REDRAWS
if (heartbeat)
display->setPixel(0, 0);
heartbeat = !heartbeat;
#endif
}
// ****************************
// * WiFi Screen *
// ****************************
void drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
#if HAS_WIFI && !defined(ARCH_PORTDUINO)
display->clear();
display->setTextAlignment(TEXT_ALIGN_LEFT);
display->setFont(FONT_SMALL);
int line = 1;
// === Set Title
const char *titleStr = "WiFi";
// === Header ===
graphics::drawCommonHeader(display, x, y, titleStr);
const char *wifiName = config.network.wifi_ssid;
if (WiFi.status() != WL_CONNECTED) {
display->drawString(x, getTextPositions(display)[line++], "WiFi: Not Connected");
} else {
display->drawString(x, getTextPositions(display)[line++], "WiFi: Connected");
char rssiStr[32];
snprintf(rssiStr, sizeof(rssiStr), "RSSI: %d", WiFi.RSSI());
display->drawString(x, getTextPositions(display)[line++], rssiStr);
}
/*
- WL_CONNECTED: assigned when connected to a WiFi network;
- WL_NO_SSID_AVAIL: assigned when no SSID are available;
- WL_CONNECT_FAILED: assigned when the connection fails for all the attempts;
- WL_CONNECTION_LOST: assigned when the connection is lost;
- WL_DISCONNECTED: assigned when disconnected from a network;
- WL_IDLE_STATUS: it is a temporary status assigned when WiFi.begin() is called and remains active until the number of
attempts expires (resulting in WL_CONNECT_FAILED) or a connection is established (resulting in WL_CONNECTED);
- WL_SCAN_COMPLETED: assigned when the scan networks is completed;
- WL_NO_SHIELD: assigned when no WiFi shield is present;
*/
if (WiFi.status() == WL_CONNECTED) {
char ipStr[64];
snprintf(ipStr, sizeof(ipStr), "IP: %s", WiFi.localIP().toString().c_str());
display->drawString(x, getTextPositions(display)[line++], ipStr);
} else if (WiFi.status() == WL_NO_SSID_AVAIL) {
display->drawString(x, getTextPositions(display)[line++], "SSID Not Found");
} else if (WiFi.status() == WL_CONNECTION_LOST) {
display->drawString(x, getTextPositions(display)[line++], "Connection Lost");
} else if (WiFi.status() == WL_IDLE_STATUS) {
display->drawString(x, getTextPositions(display)[line++], "Idle ... Reconnecting");
} else if (WiFi.status() == WL_CONNECT_FAILED) {
display->drawString(x, getTextPositions(display)[line++], "Connection Failed");
}
#ifdef ARCH_ESP32
else {
// Codes:
// https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/wifi.html#wi-fi-reason-code
display->drawString(x, getTextPositions(display)[line++],
WiFi.disconnectReasonName(static_cast<wifi_err_reason_t>(getWifiDisconnectReason())));
}
#else
else {
char statusStr[32];
snprintf(statusStr, sizeof(statusStr), "Unknown status: %d", WiFi.status());
display->drawString(x, getTextPositions(display)[line++], statusStr);
}
#endif
char ssidStr[64];
snprintf(ssidStr, sizeof(ssidStr), "SSID: %s", wifiName);
display->drawString(x, getTextPositions(display)[line++], ssidStr);
display->drawString(x, getTextPositions(display)[line++], "URL: http://meshtastic.local");
graphics::drawCommonFooter(display, x, y);
/* Display a heartbeat pixel that blinks every time the frame is redrawn */
#ifdef SHOW_REDRAWS
if (heartbeat)
display->setPixel(0, 0);
heartbeat = !heartbeat;
#endif
#endif
}
void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
display->setFont(FONT_SMALL);
// The coordinates define the left starting point of the text
display->setTextAlignment(TEXT_ALIGN_LEFT);
if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
display->setColor(BLACK);
}
char batStr[20];
if (powerStatus->getHasBattery()) {
int batV = powerStatus->getBatteryVoltageMv() / 1000;
int batCv = (powerStatus->getBatteryVoltageMv() % 1000) / 10;
snprintf(batStr, sizeof(batStr), "B %01d.%02dV %3d%% %c%c", batV, batCv, powerStatus->getBatteryChargePercent(),
powerStatus->getIsCharging() ? '+' : ' ', powerStatus->getHasUSB() ? 'U' : ' ');
// Line 1
display->drawString(x, y, batStr);
if (config.display.heading_bold)
display->drawString(x + 1, y, batStr);
} else {
// Line 1
display->drawString(x, y, "USB");
if (config.display.heading_bold)
display->drawString(x + 1, y, "USB");
}
uint32_t currentMillis = millis();
uint32_t seconds = currentMillis / 1000;
uint32_t minutes = seconds / 60;
uint32_t hours = minutes / 60;
uint32_t days = hours / 24;
// currentMillis %= 1000;
// seconds %= 60;
// minutes %= 60;
// hours %= 24;
// Show uptime as days, hours, minutes OR seconds
std::string uptime = UIRenderer::drawTimeDelta(days, hours, minutes, seconds);
// Line 1 (Still)
#if !defined(M5STACK_UNITC6L)
display->drawString(x + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
if (config.display.heading_bold)
display->drawString(x - 1 + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
display->setColor(WHITE);
#endif
// Setup string to assemble analogClock string
std::string analogClock = "";
uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
if (rtc_sec > 0) {
long hms = rtc_sec % SEC_PER_DAY;
// hms += tz.tz_dsttime * SEC_PER_HOUR;
// hms -= tz.tz_minuteswest * SEC_PER_MIN;
// mod `hms` to ensure in positive range of [0...SEC_PER_DAY)
hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
// Tear apart hms into h:m:s
int hour = hms / SEC_PER_HOUR;
int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
char timebuf[12];
if (config.display.use_12h_clock) {
std::string meridiem = "am";
if (hour >= 12) {
if (hour > 12)
hour -= 12;
meridiem = "pm";
}
if (hour == 00) {
hour = 12;
}
snprintf(timebuf, sizeof(timebuf), "%d:%02d:%02d%s", hour, min, sec, meridiem.c_str());
} else {
snprintf(timebuf, sizeof(timebuf), "%02d:%02d:%02d", hour, min, sec);
}
analogClock += timebuf;
}
// Line 2
display->drawString(x, y + FONT_HEIGHT_SMALL * 1, analogClock.c_str());
// Display Channel Utilization
char chUtil[13];
snprintf(chUtil, sizeof(chUtil), "ChUtil %2.0f%%", airTime->channelUtilizationPercent());
display->drawString(x + SCREEN_WIDTH - display->getStringWidth(chUtil), y + FONT_HEIGHT_SMALL * 1, chUtil);
#if HAS_GPS
if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
// Line 3
if (uiconfig.gps_format != meshtastic_DeviceUIConfig_GpsCoordinateFormat_DMS) // if DMS then don't draw altitude
UIRenderer::drawGpsAltitude(display, x, y + FONT_HEIGHT_SMALL * 2, gpsStatus);
// Line 4
UIRenderer::drawGpsCoordinates(display, x, y + FONT_HEIGHT_SMALL * 3, gpsStatus);
} else {
UIRenderer::drawGpsPowerStatus(display, x, y + FONT_HEIGHT_SMALL * 2, gpsStatus);
}
#endif
/* Display a heartbeat pixel that blinks every time the frame is redrawn */
#ifdef SHOW_REDRAWS
if (heartbeat)
display->setPixel(0, 0);
heartbeat = !heartbeat;
#endif
}
// Trampoline functions for DebugInfo class access
void drawDebugInfoTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
drawFrame(display, state, x, y);
}
void drawDebugInfoSettingsTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
drawFrameSettings(display, state, x, y);
}
void drawDebugInfoWiFiTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
drawFrameWiFi(display, state, x, y);
}
// ****************************
// * LoRa Focused Screen *
// ****************************
void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
display->clear();
display->setTextAlignment(TEXT_ALIGN_LEFT);
display->setFont(FONT_SMALL);
int line = 1;
// === Set Title
const char *titleStr = (isHighResolution) ? "LoRa Info" : "LoRa";
// === Header ===
graphics::drawCommonHeader(display, x, y, titleStr);
// === First Row: Region / BLE Name ===
graphics::UIRenderer::drawNodes(display, x, getTextPositions(display)[line] + 2, nodeStatus, 0, true, "");
uint8_t dmac[6];
char shortnameble[35];
getMacAddr(dmac);
snprintf(screen->ourId, sizeof(screen->ourId), "%02x%02x", dmac[4], dmac[5]);
#if defined(M5STACK_UNITC6L)
snprintf(shortnameble, sizeof(shortnameble), "%s", screen->ourId);
#else
snprintf(shortnameble, sizeof(shortnameble), "BLE: %s", screen->ourId);
#endif
int textWidth = display->getStringWidth(shortnameble);
int nameX = (SCREEN_WIDTH - textWidth);
display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
// === Second Row: Role ===
auto role = DisplayFormatters::getDeviceRole(config.device.role);
char device_role[25];
snprintf(device_role, sizeof(device_role), "Role: %s", role);
textWidth = display->getStringWidth(device_role);
nameX = (SCREEN_WIDTH - textWidth) / 2;
display->drawString(nameX, getTextPositions(display)[line++], device_role);
// === Third Row: Radio Preset ===
auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
char regionradiopreset[25];
const char *region = myRegion ? myRegion->name : NULL;
if (region != nullptr) {
#if defined(M5STACK_UNITC6L)
snprintf(regionradiopreset, sizeof(regionradiopreset), "%s", region);
#else
snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, mode);
#endif
}
textWidth = display->getStringWidth(regionradiopreset);
nameX = (SCREEN_WIDTH - textWidth) / 2;
display->drawString(nameX, getTextPositions(display)[line++], regionradiopreset);
// === Fourth Row: Frequency / ChanNum ===
char frequencyslot[35];
char freqStr[16];
float freq = RadioLibInterface::instance->getFreq();
snprintf(freqStr, sizeof(freqStr), "%.3f", freq);
if (config.lora.channel_num == 0) {
#if defined(M5STACK_UNITC6L)
snprintf(frequencyslot, sizeof(frequencyslot), "%sMHz", freqStr);
#else
snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %sMHz", freqStr);
#endif
} else {
#if defined(M5STACK_UNITC6L)
snprintf(frequencyslot, sizeof(frequencyslot), "%sMHz (%d)", freqStr, config.lora.channel_num);
#else
snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %sMHz (%d)", freqStr, config.lora.channel_num);
#endif
}
size_t len = strlen(frequencyslot);
if (len >= 4 && strcmp(frequencyslot + len - 4, " (0)") == 0) {
frequencyslot[len - 4] = '\0'; // Remove the last three characters
}
textWidth = display->getStringWidth(frequencyslot);
nameX = (SCREEN_WIDTH - textWidth) / 2;
display->drawString(nameX, getTextPositions(display)[line++], frequencyslot);
#if !defined(M5STACK_UNITC6L)
// === Fifth Row: Channel Utilization ===
const char *chUtil = "ChUtil:";
char chUtilPercentage[10];
snprintf(chUtilPercentage, sizeof(chUtilPercentage), "%2.0f%%", airTime->channelUtilizationPercent());
int chUtil_x = (isHighResolution) ? display->getStringWidth(chUtil) + 10 : display->getStringWidth(chUtil) + 5;
int chUtil_y = getTextPositions(display)[line] + 3;
int chutil_bar_width = (isHighResolution) ? 100 : 50;
int chutil_bar_height = (isHighResolution) ? 12 : 7;
int extraoffset = (isHighResolution) ? 6 : 3;
int chutil_percent = airTime->channelUtilizationPercent();
int centerofscreen = SCREEN_WIDTH / 2;
int total_line_content_width = (chUtil_x + chutil_bar_width + display->getStringWidth(chUtilPercentage) + extraoffset) / 2;
int starting_position = centerofscreen - total_line_content_width;
display->drawString(starting_position, getTextPositions(display)[line], chUtil);
// Force 56% or higher to show a full 100% bar, text would still show related percent.
if (chutil_percent >= 61) {
chutil_percent = 100;
}
// Weighting for nonlinear segments
float milestone1 = 25;
float milestone2 = 40;
float weight1 = 0.45; // Weight for 025%
float weight2 = 0.35; // Weight for 2540%
float weight3 = 0.20; // Weight for 40100%
float totalWeight = weight1 + weight2 + weight3;
int seg1 = chutil_bar_width * (weight1 / totalWeight);
int seg2 = chutil_bar_width * (weight2 / totalWeight);
int seg3 = chutil_bar_width * (weight3 / totalWeight);
int fillRight = 0;
if (chutil_percent <= milestone1) {
fillRight = (seg1 * (chutil_percent / milestone1));
} else if (chutil_percent <= milestone2) {
fillRight = seg1 + (seg2 * ((chutil_percent - milestone1) / (milestone2 - milestone1)));
} else {
fillRight = seg1 + seg2 + (seg3 * ((chutil_percent - milestone2) / (100 - milestone2)));
}
// Draw outline
display->drawRect(starting_position + chUtil_x, chUtil_y, chutil_bar_width, chutil_bar_height);
// Fill progress
if (fillRight > 0) {
display->fillRect(starting_position + chUtil_x, chUtil_y, fillRight, chutil_bar_height);
}
display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[line++],
chUtilPercentage);
#endif
graphics::drawCommonFooter(display, x, y);
}
// ****************************
// * System Screen *
// ****************************
void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
display->clear();
display->setFont(FONT_SMALL);
display->setTextAlignment(TEXT_ALIGN_LEFT);
// === Set Title
const char *titleStr = "System";
// === Header ===
graphics::drawCommonHeader(display, x, y, titleStr);
// === Layout ===
int line = 1;
const int barHeight = 6;
const int labelX = x;
int barsOffset = (isHighResolution) ? 24 : 0;
#ifdef USE_EINK
barsOffset -= 12;
#endif
#if defined(M5STACK_UNITC6L)
const int barX = x + 45 + barsOffset;
#else
const int barX = x + 40 + barsOffset;
#endif
auto drawUsageRow = [&](const char *label, uint32_t used, uint32_t total, bool isHeap = false) {
if (total == 0)
return;
int percent = (used * 100) / total;
char combinedStr[24];
if (isHighResolution) {
snprintf(combinedStr, sizeof(combinedStr), "%s%3d%% %u/%uKB", (percent > 80) ? "! " : "", percent, used / 1024,
total / 1024);
} else {
snprintf(combinedStr, sizeof(combinedStr), "%s%3d%%", (percent > 80) ? "! " : "", percent);
}
int textWidth = display->getStringWidth(combinedStr);
int adjustedBarWidth = SCREEN_WIDTH - barX - textWidth - 6;
if (adjustedBarWidth < 10)
adjustedBarWidth = 10;
int fillWidth = (used * adjustedBarWidth) / total;
// Label
display->setTextAlignment(TEXT_ALIGN_LEFT);
display->drawString(labelX, getTextPositions(display)[line], label);
#if !defined(M5STACK_UNITC6L)
// Bar
int barY = getTextPositions(display)[line] + (FONT_HEIGHT_SMALL - barHeight) / 2;
display->setColor(WHITE);
display->drawRect(barX, barY, adjustedBarWidth, barHeight);
display->fillRect(barX, barY, fillWidth, barHeight);
display->setColor(WHITE);
#endif
// Value string
display->setTextAlignment(TEXT_ALIGN_RIGHT);
display->drawString(SCREEN_WIDTH - 2, getTextPositions(display)[line], combinedStr);
};
// === Memory values ===
uint32_t heapUsed = memGet.getHeapSize() - memGet.getFreeHeap();
uint32_t heapTotal = memGet.getHeapSize();
uint32_t psramUsed = memGet.getPsramSize() - memGet.getFreePsram();
uint32_t psramTotal = memGet.getPsramSize();
uint32_t flashUsed = 0, flashTotal = 0;
#ifdef ESP32
flashUsed = FSCom.usedBytes();
flashTotal = FSCom.totalBytes();
#endif
uint32_t sdUsed = 0, sdTotal = 0;
bool hasSD = false;
/*
#ifdef HAS_SDCARD
hasSD = SD.cardType() != CARD_NONE;
if (hasSD) {
sdUsed = SD.usedBytes();
sdTotal = SD.totalBytes();
}
#endif
*/
// === Draw memory rows
drawUsageRow("Heap:", heapUsed, heapTotal, true);
#ifdef ESP32
if (psramUsed > 0) {
line += 1;
drawUsageRow("PSRAM:", psramUsed, psramTotal);
}
if (flashTotal > 0) {
line += 1;
drawUsageRow("Flash:", flashUsed, flashTotal);
}
#endif
if (hasSD && sdTotal > 0) {
line += 1;
drawUsageRow("SD:", sdUsed, sdTotal);
}
display->setTextAlignment(TEXT_ALIGN_LEFT);
// System Uptime
if (line < 2) {
line += 1;
}
line += 1;
char appversionstr[35];
snprintf(appversionstr, sizeof(appversionstr), "Ver: %s", optstr(APP_VERSION));
char appversionstr_formatted[40];
char *lastDot = strrchr(appversionstr, '.');
#if defined(M5STACK_UNITC6L)
if (lastDot != nullptr) {
*lastDot = '\0'; // truncate string
}
#else
if (lastDot) {
size_t prefixLen = lastDot - appversionstr;
strncpy(appversionstr_formatted, appversionstr, prefixLen);
appversionstr_formatted[prefixLen] = '\0';
strncat(appversionstr_formatted, " (", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
strncat(appversionstr_formatted, lastDot + 1, sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
strncat(appversionstr_formatted, ")", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
strncpy(appversionstr, appversionstr_formatted, sizeof(appversionstr) - 1);
appversionstr[sizeof(appversionstr) - 1] = '\0';
}
#endif
int textWidth = display->getStringWidth(appversionstr);
int nameX = (SCREEN_WIDTH - textWidth) / 2;
display->drawString(nameX, getTextPositions(display)[line++], appversionstr);
if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show uptime if the screen can show it
char uptimeStr[32] = "";
getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
textWidth = display->getStringWidth(uptimeStr);
nameX = (SCREEN_WIDTH - textWidth) / 2;
display->drawString(nameX, getTextPositions(display)[line++], uptimeStr);
}
if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show API state if the screen can show it
char api_state[32] = "";
const char *clientWord = nullptr;
// Determine if narrow or wide screen
if (isHighResolution) {
clientWord = "Client";
} else {
clientWord = "App";
}
snprintf(api_state, sizeof(api_state), "No %ss Connected", clientWord);
if (service->api_state == service->STATE_BLE) {
snprintf(api_state, sizeof(api_state), "%s Connected (BLE)", clientWord);
} else if (service->api_state == service->STATE_WIFI) {
snprintf(api_state, sizeof(api_state), "%s Connected (WiFi)", clientWord);
} else if (service->api_state == service->STATE_SERIAL) {
snprintf(api_state, sizeof(api_state), "%s Connected (Serial)", clientWord);
} else if (service->api_state == service->STATE_PACKET) {
snprintf(api_state, sizeof(api_state), "%s Connected (Internal)", clientWord);
} else if (service->api_state == service->STATE_HTTP) {
snprintf(api_state, sizeof(api_state), "%s Connected (HTTP)", clientWord);
} else if (service->api_state == service->STATE_ETH) {
snprintf(api_state, sizeof(api_state), "%s Connected (Ethernet)", clientWord);
}
if (api_state[0] != '\0') {
display->drawString((SCREEN_WIDTH - display->getStringWidth(api_state)) / 2, getTextPositions(display)[line++],
api_state);
}
}
graphics::drawCommonFooter(display, x, y);
}
// ****************************
// * Chirpy Screen *
// ****************************
void drawChirpy(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
display->clear();
display->setTextAlignment(TEXT_ALIGN_LEFT);
display->setFont(FONT_SMALL);
int line = 1;
int iconX = SCREEN_WIDTH - chirpy_width - (chirpy_width / 3);
int iconY = (SCREEN_HEIGHT - chirpy_height) / 2;
int textX_offset = 10;
if (isHighResolution) {
iconX = SCREEN_WIDTH - chirpy_width_hirez - (chirpy_width_hirez / 3);
iconY = (SCREEN_HEIGHT - chirpy_height_hirez) / 2;
textX_offset = textX_offset * 4;
display->drawXbm(iconX, iconY, chirpy_width_hirez, chirpy_height_hirez, chirpy_hirez);
} else {
display->drawXbm(iconX, iconY, chirpy_width, chirpy_height, chirpy);
}
int textX = (display->getWidth() / 2) - textX_offset - (display->getStringWidth("Hello") / 2);
display->drawString(textX, getTextPositions(display)[line++], "Hello");
textX = (display->getWidth() / 2) - textX_offset - (display->getStringWidth("World!") / 2);
display->drawString(textX, getTextPositions(display)[line++], "World!");
}
} // namespace DebugRenderer
} // namespace graphics
#endif