mirror of
https://github.com/meshtastic/firmware.git
synced 2026-09-17 00:52:45 -04:00
Andrew YongandBen Meadors
db84bdf3b4
* Generalize RTTTL exclusion into MESHTASTIC_EXCLUDE_RTTTL ExternalNotificationModule already stubbed out RTTTL playback for STM32WL/portduino/ESP32C6 via a raw ARCH/CONFIG_IDF check, but the ringtone config plumbing around it (protobuf message, encode/decode tables, /prefs/ringtone.proto persistence, admin get/set-ringtone handlers) still compiled in even though it can never do anything on those platforms. Introduce MESHTASTIC_EXCLUDE_RTTTL and gate the dead ringtone plumbing behind it too. The flag is set in each architecture's *_base build_flags (stm32_base, esp32c6_base, portduino_base) rather than in the module itself - this matches how every other MESHTASTIC_EXCLUDE_* flag in the tree is set (e.g. stm32_base already sets ten of them directly, and esp32c6_base already excludes PAXCOUNTER for an analogous platform-can't-support-this reason), rather than introducing a new per-architecture C header pattern. Behavior is unchanged on all three platforms; overridable via -D like every other MESHTASTIC_EXCLUDE_* flag. Also guard the two HAS_I2S ringtone-playback call sites with !MESHTASTIC_EXCLUDE_RTTTL alongside HAS_I2S, since rtttlConfig itself is now only declared when RTTTL is not excluded. No current platform defines both HAS_I2S and MESHTASTIC_EXCLUDE_RTTTL simultaneously, so this has no effect today, but prevents a future HAS_I2S platform that also excludes RTTTL from failing to compile. Saves 368 bytes flash / 236 bytes RAM on wio-e5 with no loss to the GPIO on/off notification toggle itself, which does not depend on RTTTL. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> * Skip unused InputBroker observer in ExternalNotificationModule The inputObserver CallbackObserver member was declared unconditionally, even though its only use site was already gated behind MESHTASTIC_EXCLUDE_INPUTBROKER (set for all of stm32 in stm32.ini). Because it's a non-trivial member, the compiler still generated its constructor/destructor as part of ExternalNotificationModule's own lifecycle even when InputBroker is compiled out entirely. Gate the member and its only consumer, handleInputEvent(), behind the same flag as their use site, and match the codebase's dominant !MESHTASTIC_EXCLUDE_X style (used ~330 times) rather than !defined(MESHTASTIC_EXCLUDE_X) (used ~20 times) while touching this flag's other call site. Saves an additional 288 bytes flash on wio-e5, no RAM change, no functional impact since InputBroker was already unused on this platform. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> * fix(native-wasm): exclude RTTTL to unbreak build The browser node builds its own build_flags from arduino_base rather than inheriting portduino_base, so it did not pick up the MESHTASTIC_EXCLUDE_RTTTL flag added to portduino_base. With the inline ARCH_PORTDUINO stub in ExternalNotificationModule.h now replaced by that flag, native-wasm tried to include the unavailable NonBlockingRtttl.h. Set MESHTASTIC_EXCLUDE_RTTTL=1 directly in the native-wasm env alongside its other exclusion flags. Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
80 lines
3.3 KiB
INI
80 lines
3.3 KiB
INI
; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
|
|
[portduino_base]
|
|
platform =
|
|
# renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
|
|
https://github.com/meshtastic/platform-native/archive/86c62edfb7084d11669aa255411a70580e83823b.zip
|
|
framework = arduino
|
|
|
|
build_src_filter =
|
|
${env.build_src_filter}
|
|
-<platform/>
|
|
+<platform/portduino>
|
|
-<platform/portduino/wasm/> ; emscripten-only sources, built by [env:native-wasm] (pio run -e native-wasm)
|
|
-<nimble/>
|
|
-<mesh/wifi/>
|
|
-<mesh/http/>
|
|
+<mesh/raspihttp/>
|
|
-<mesh/eth/>
|
|
-<modules/esp32>
|
|
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
${networking_base.lib_deps}
|
|
${networking_extra.lib_deps}
|
|
${radiolib_base.lib_deps}
|
|
${environmental_base.lib_deps}
|
|
# renovate: datasource=git-refs depName=meshtastic/Crypto packageName=https://github.com/meshtastic/Crypto gitBranch=main
|
|
https://github.com/meshtastic/Crypto/archive/591ff9a690e8168ccb7a36abde8d7783e448d395.zip
|
|
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
|
|
lovyan03/LovyanGFX@1.2.27
|
|
; # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/meshtastic/libch341-spi-userspace gitBranch=main
|
|
https://github.com/meshtastic/libch341-spi-userspace/archive/03bf505d6e5904092c1c389c45b01098f7a302fe.zip
|
|
# renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
|
|
adafruit/Adafruit seesaw Library@1.7.9
|
|
# renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
|
|
https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
|
|
# renovate: datasource=github-tags depName=Adafruit_BME680 packageName=adafruit/Adafruit_BME680
|
|
https://github.com/adafruit/Adafruit_BME680/archive/refs/tags/2.0.6.zip
|
|
|
|
; Cross-platform build flags shared between native (Linux) and native-macos builds.
|
|
; Anything Linux-only (libbluetooth, libgpiod, libi2c, /sys/class/gpio,
|
|
; PORTDUINO_LINUX_HARDWARE, glibc-style _FORTIFY_SOURCE) goes in `build_flags`
|
|
; instead. UDP multicast also lives there because the firmware's
|
|
; UdpMulticastHandler.h unconditionally `#include <WiFi.h>` on non-NRF52
|
|
; targets, which requires the framework's bundled WiFi shim that we
|
|
; lib_ignore on macOS.
|
|
build_flags_common =
|
|
${arduino_base.build_flags}
|
|
-D ARCH_PORTDUINO
|
|
-fPIC
|
|
-Isrc/platform/portduino
|
|
-DRADIOLIB_EEPROM_UNSUPPORTED
|
|
-DMESHTASTIC_EXCLUDE_RTTTL ; No PWM/RTTTL ringtone playback support on this platform.
|
|
-lpthread
|
|
-lyaml-cpp
|
|
-ljsoncpp
|
|
!pkg-config --cflags jsoncpp --silence-errors || :
|
|
-luv
|
|
-std=gnu17
|
|
-std=gnu++17
|
|
-DMAX_TFT_COLOR_REGIONS=64
|
|
; Unity omits double support unless asked, compiling TEST_ASSERT_DOUBLE_* into an
|
|
; unconditional "Unity Double Precision Disabled" failure (test_gps_update_scheduling).
|
|
-DUNITY_INCLUDE_DOUBLE
|
|
|
|
build_flags =
|
|
${portduino_base.build_flags_common}
|
|
-DHAS_UDP_MULTICAST=1
|
|
-D_FORTIFY_SOURCE=2
|
|
-fstack-protector-all -Wstack-protector --param ssp-buffer-size=4
|
|
-DPORTDUINO_LINUX_HARDWARE
|
|
-lstdc++fs
|
|
-lbluetooth
|
|
-lgpiod
|
|
-li2c
|
|
lib_ignore =
|
|
Adafruit NeoPixel
|
|
Adafruit ST7735 and ST7789 Library
|
|
Adafruit SSD1306
|
|
SD
|