Jonathan BennettandClaude Opus 5.5 1ce73fb3d7 Hold received-packet handling for a slotted TX that falls due first ...

Router::runOnce() handles every queued reception (decrypt, modules, the
phone; ~20 ms on nRF52) before the radio thread's TX timer can run, so a
TX due in that time leaves late by as much, out of the slot its parity
drew. On Jonathan's DMShell bench (round 57, T1000-E client, 3 x 300 s
per arm) holding the reception took drawn fire-to-air with RX handling
in the window from p90 26 ms to 7 ms, collided bursts from 6.0 to 0.0
per run (SDR agreeing), and total loss from 1.59% to 1.17%.

- RadioLibInterface arms the TX timer through one helper,
  scheduleTransmitDelayCompleted(), which notes when it falls due if the
  front packet has a slot parity (0 otherwise), and clears the note when
  the timer runs. getTxDueMs() reports it; other radios report 0.
- Router::runOnce() holds the next reception when such a TX is due
  within 30 ms, or is just past due and the radio thread has not run
  yet, and returns until 2 ms after the due time. Another arrival does
  not cut the hold short while the TX is pending. Each packet is held
  at most once, for at most 32 ms.
- Packets without a slot parity never set a due time, so ordinary mesh
  traffic is unaffected.
- Router.cpp now includes Throttle.h on every platform, not only
  portduino.

Co-Authored-By: Jonathan Bennett <jbennett@incomsystems.biz>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01REkPVFh6kvG4AZJ5A8AtM9

2026-10-09 16:47:20 +00:00

..

test_main.cpp

Hold received-packet handling for a slotted TX that falls due first

2026-10-09 16:47:20 +00:00