Jonathan BennettandClaude Opus 5.5 ebda44c677 NodeDB: hold environment satellites protobuf-encoded ...

Each environment satellite held a full meshtastic_EnvironmentMetrics,
304 B for 38 optional fields, of which a real sensor sets a handful. At
the nRF52 cap of 40 that is ~12 KB of heap holding about 1 KB of data.

Store the encoded bytes instead (~15-40 B per entry) and decode on read:
copyNodeEnvironment() keeps its signature. The save writes the stored
bytes straight out as the entry's environment_metrics, so nodes.proto
is unchanged; the load packs each decoded entry. hasNodeEnvironment()
becomes a key lookup, and MemAudit counts the real blob sizes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-11-03 10:58:19 -06:00

..

buzz

T-Watch Ultra support (#8171)

2026-08-20 12:28:57 +00:00

concurrency

Fail the native simulator job on a sanitizer fault, and fix the one it found (#12205)

2026-10-20 14:07:34 +00:00

detect

Makerfabs nomad terminal (#12112)

2026-10-14 15:18:24 +00:00

gps

fix(gps): match Airoha idle_int sleep to the documented sequence (#12167)

2026-10-19 00:01:36 +00:00

graphics

MUI: adapt to device-ui storage (FATFS) and SD bus classes for SD card (#12249)

2026-11-02 18:33:48 +00:00

input

Unify input debug logging under INPUT_DEBUG (#12287)

2026-11-03 05:56:25 +00:00

memory

Add central memory-class ladder (MemClass.h) with fail-safe-small defaults (#10901)

2026-07-06 14:51:41 -05:00

mesh

NodeDB: hold environment satellites protobuf-encoded

2026-11-03 10:58:19 -06:00

modules

MeshBeacon: wait out the remaining interval after a reboot (#12274)

2026-11-03 10:36:35 +00:00

motion

fix(motion): include NodeDB.h so MotionSensor always sees the global config (#12192)

2026-10-19 13:26:43 +00:00

mqtt

Rework XEdDSA signing policy: Compatible stops signing, AES-CCM overrides, Strict exemptions (#12191)

2026-10-22 01:08:36 +00:00

nimble

fix(nimble): stop leaking BLE2904 descriptor on BLE re-setup (#11453)

2026-08-12 18:15:18 -05:00

platform

Unify input debug logging under INPUT_DEBUG (#12287)

2026-11-03 05:56:25 +00:00

power

Add zero guards on time calculations where they were missing (#11692)

2026-09-12 10:54:50 +00:00

security

Add zero guards on time calculations where they were missing (#11692)

2026-09-12 10:54:50 +00:00

serialization

logging: audit log strings for terseness, reclaiming ~6.8 KB of string data (#11374)

2026-08-10 01:02:19 +00:00

watchdog

Trunk

2026-01-29 05:56:19 -06:00

airtime.cpp

nRF52: reclaim flash to bring rak4631 back under its size budget (#11873)

2026-09-17 09:36:41 +00:00

airtime.h

nRF52: reclaim flash to bring rak4631 back under its size budget (#11873)

2026-09-17 09:36:41 +00:00

AmbientLightingThread.h

logging: audit log strings for terseness, reclaiming ~6.8 KB of string data (#11374)

2026-08-10 01:02:19 +00:00

AudioThread.h

feat: Support Seeed Wio Tracker L2 (#10909)

2026-08-28 23:30:27 +00:00

BluetoothCommon.cpp

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

BluetoothCommon.h

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

BluetoothStatus.h

Develop to master (#9618)

2026-02-19 07:16:33 -06:00

commands.h

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

configuration.h

Show Ethernet status on the WiFi screen (#11991)

2026-09-29 11:13:51 +00:00

DebugConfiguration.cpp

ThinkNode M7 (#8077)

2026-05-11 11:46:13 -05:00

DebugConfiguration.h

Unify input debug logging under INPUT_DEBUG (#12287)

2026-11-03 05:56:25 +00:00

DisplayFormatters.cpp

Add MEDIUM_TURBO modem preset (#10988)

2026-07-11 08:24:35 -05:00

DisplayFormatters.h

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

error.h

…

freertosinc.h

Port nRF54L15 to the s145 SoftDevice Arduino core (#11842)

2026-09-15 07:16:33 +00:00

FSCommon.cpp

MUI: adapt to device-ui storage (FATFS) and SD bus classes for SD card (#12249)

2026-11-02 18:33:48 +00:00

FSCommon.h

Port nRF54L15 to the s145 SoftDevice Arduino core (#11842)

2026-09-15 07:16:33 +00:00

GpioLogic.cpp

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

GpioLogic.h

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

GPSStatus.h

logging: compile out LOG_TRACE by default, demote chatty DEBUG lines, drop redundant logs (#11391)

2026-08-12 00:05:51 +00:00

main.cpp

Report the BLE address in DeviceMetadata.ble_address (#12281)

2026-11-03 05:00:25 +00:00

main.h

feat(portduino): BLE peripheral support via BlueZ for meshtasticd (Raspberry Pi) (#11396)

2026-10-01 21:20:09 +00:00

mbedtls_user_config.h

emdashes begone (#10847)

2026-07-01 19:01:27 -05:00

memGet.cpp

feat: log heap watermark, largest free block and subsystem breakdown (#11660)

2026-09-03 08:52:55 +00:00

memGet.h

feat: log heap watermark, largest free block and subsystem breakdown (#11660)

2026-09-03 08:52:55 +00:00

meshUtils.cpp

Report the BLE address in DeviceMetadata.ble_address (#12281)

2026-11-03 05:00:25 +00:00

meshUtils.h

Report the BLE address in DeviceMetadata.ble_address (#12281)

2026-11-03 05:00:25 +00:00

MessageStore.cpp

fix(time): convert the millis() rollover sites #11291's CI guard cannot see (#11483)

2026-08-13 13:15:21 -04:00

MessageStore.h

fix(time): convert the millis() rollover sites #11291's CI guard cannot see (#11483)

2026-08-13 13:15:21 -04:00

network-stubs.cpp

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

NodeStatus.h

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

Observer.cpp

…

Observer.h

Fail the native simulator job on a sanitizer fault, and fix the one it found (#12205)

2026-10-20 14:07:34 +00:00

Pca9555.h

feat: Support Seeed Wio Tracker L2 (#10909)

2026-08-28 23:30:27 +00:00

Power.cpp

Stop treating BATTERY_PIN -1 as a battery ADC (#12091)

2026-10-16 21:48:28 +00:00

Power.h

fix(power): stop a battery-less board deep-sleeping itself forever (#11821)

2026-09-11 16:43:28 +00:00

PowerFSM.cpp

Stop treating BATTERY_PIN -1 as a battery ADC (#12091)

2026-10-16 21:48:28 +00:00

PowerFSM.h

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

PowerFSMThread.h

Fix millis() rollover in deadline, interval, and timestamp handling (#11291)

2026-08-12 16:49:17 -05:00

PowerMon.cpp

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

PowerMon.h

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

PowerStatus.h

Remove some deadcode (#11034)

2026-07-16 18:57:50 -05:00

RedirectablePrint.cpp

Logging: cut per-packet lines that carry nothing, rate-limit busyRx (#12083)

2026-10-05 17:05:46 +00:00

RedirectablePrint.h

SenseCAP Indicator: RP2040 peripherals for the main firmware (#6220)

2026-08-01 16:23:30 +00:00

RF95Configuration.h

Add 2 Meter (~144mhz) Amateur Radio Regions (#10623)

2026-06-03 18:05:03 -04:00

SafeFile.cpp

Fix the t-impulse touch button (#12286)

2026-11-03 05:24:18 +00:00

SafeFile.h

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

SerialConsole.cpp

SerialConsole: restart a latched HWCDC TX path on ESP32-S3 (#12076)

2026-10-06 16:23:52 +00:00

SerialConsole.h

SerialConsole: restart a latched HWCDC TX path on ESP32-S3 (#12076)

2026-10-06 16:23:52 +00:00

sleep.cpp

Latch the LoRa IRQ skip-sleep give-up until the line is seen low (#12155)

2026-10-14 17:06:40 +00:00

sleep.h

Don't light sleep while a USB host has the console open (#12141)

2026-10-12 19:29:17 +00:00

SPILock.cpp

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

SPILock.h

…

Status.h

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

target_specific.h

Report the BLE address in DeviceMetadata.ble_address (#12281)

2026-11-03 05:00:25 +00:00

UptimeClock.cpp

Fix millis() rollover in deadline, interval, and timestamp handling (#11291)

2026-08-12 16:49:17 -05:00

UptimeClock.h

time: arm the remaining 0-means-unset stamps through the helpers (#11830)

2026-09-14 12:19:02 +00:00

WaypointStore.cpp

test(harness): make run-tests.sh drivable by a caller that cannot see the terminal (#11862)

2026-09-22 11:10:53 +00:00

WaypointStore.h

Add waypoint & geofence support with notifications for BaseUI and InkHUD (#10920)

2026-08-26 16:17:28 +00:00

WaypointUtils.h

Add waypoint & geofence support with notifications for BaseUI and InkHUD (#10920)

2026-08-26 16:17:28 +00:00

xmodem.cpp

fix(xmodem): return the phone-facing packet by const reference (#11781)

2026-09-09 13:28:52 +00:00

xmodem.h

fix(xmodem): return the phone-facing packet by const reference (#11781)

2026-09-09 13:28:52 +00:00