diff --git a/data/locale/ca.ts b/data/locale/ca.ts index f9a500abd..a8ebe20ba 100644 --- a/data/locale/ca.ts +++ b/data/locale/ca.ts @@ -421,15 +421,15 @@ If you're interested in translating LMMS in another language or want to imp - Cut selected values (Ctrl+X) - Talla els valors seleccionats (Ctrl+X) + Cut selected values (%1+X) + Talla els valors seleccionats (%1+X) - Copy selected values (Ctrl+C) - Copia els valors seleccionats (Ctrl+C) + Copy selected values (%1+C) + Copia els valors seleccionats (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -460,7 +460,7 @@ If you're interested in translating LMMS in another language or want to imp AutomationPattern - Drag a control while pressing <Ctrl> + Drag a control while pressing <%1> @@ -4870,7 +4870,7 @@ usa la roda del ratolí per a ajustar el volum d'un pas - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. @@ -4878,7 +4878,7 @@ usa la roda del ratolí per a ajustar el volum d'un pas - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. @@ -4886,16 +4886,16 @@ usa la roda del ratolí per a ajustar el volum d'un pas - Cut selected notes (Ctrl+X) - Talla les notes seleccionades (Ctrl+X) + Cut selected notes (%1+X) + Talla les notes seleccionades (%1+X) - Copy selected notes (Ctrl+C) - Copia les notes seleccionades (Ctrl+C) + Copy selected notes (%1+C) + Copia les notes seleccionades (%1+C) - Paste notes from clipboard (Ctrl+V) - Enganxa notes des del portapapers (Ctrl+V) + Paste notes from clipboard (%1+V) + Enganxa notes des del portapapers (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -4995,40 +4995,40 @@ Reason: "%2" &Desfés - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo &Refés - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy &Copia - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t &Talla - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste &Enganxa - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5039,56 +5039,56 @@ Reason: "%2" &Negreta - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic Curs&iva - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline &Subratllat - Ctrl+U - Ctrl+U + %1+U + %1+U &Left &Esquerra - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter Cen&tre - Ctrl+E - Ctrl+E + %1+E + %1+E &Right &Dreta - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify &Justifica - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5322,8 +5322,8 @@ Reason: "%2" Enganxa - Mute/unmute (<Ctrl> + middle click) - Apaga/encén (<Ctrl> + clic del mig) + Mute/unmute (<%1> + middle click) + Apaga/encén (<%1> + clic del mig) Set/clear record @@ -5925,11 +5925,11 @@ Latència: %2 ms Consell - Press <Ctrl> to disable magnetic loop points. + Press <%1> to disable magnetic loop points. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. @@ -6005,16 +6005,16 @@ Per favor, assegura't que tens permís de lectura per al fitxer i el direct Consell - Press <Ctrl> and drag to make a copy. - Pitja <Ctrl> i arrossega per a fer una còpia. + Press <%1> and drag to make a copy. + Pitja <%1> i arrossega per a fer una còpia. Current length Longitud actual - Press <Ctrl> for free resizing. - Pitja <Ctrl> per a redimensionar lliurement. + Press <%1> for free resizing. + Pitja <%1> per a redimensionar lliurement. %1:%2 (%3:%4 to %5:%6) @@ -6037,15 +6037,15 @@ Per favor, assegura't que tens permís de lectura per al fitxer i el direct Enganxa - Mute/unmute (<Ctrl> + middle click) - Apaga/encén (<Ctrl> + clic del mig) + Mute/unmute (<%1> + middle click) + Apaga/encén (<%1> + clic del mig) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. - Pitja <Ctrl> quan piquis el control de moviment per a iniciar una nova acció d'arrossegar i amollar. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. + Pitja <%1> quan piquis el control de moviment per a iniciar una nova acció d'arrossegar i amollar. Actions for this track diff --git a/data/locale/cs.ts b/data/locale/cs.ts index 0fb3fc3bf..a12e9710e 100644 --- a/data/locale/cs.ts +++ b/data/locale/cs.ts @@ -421,15 +421,15 @@ If you're interested in translating LMMS in another language or want to imp Kliknutím sem vyberte cubic hermite vývoj pro tento automatizační pattern. Hodnota připojeného objektu se změní po plynulé křivce a lehce přejde do vrchních a spodních bodů. - Cut selected values (Ctrl+X) - Vyjmout označené hodnoty (Ctrl+X) + Cut selected values (%1+X) + Vyjmout označené hodnoty (%1+X) - Copy selected values (Ctrl+C) - Kopírovat označené hodnoty (Ctrl+C) + Copy selected values (%1+C) + Kopírovat označené hodnoty (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -460,8 +460,8 @@ If you're interested in translating LMMS in another language or want to imp AutomationPattern - Drag a control while pressing <Ctrl> - Ovladač táhni při stisknutém <CTRL> + Drag a control while pressing <%1> + Ovladač táhni při stisknutém <%1> Model is already connected to this pattern. @@ -4870,7 +4870,7 @@ k nastavení zesílení kroku použijte kolečko myši - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. @@ -4878,7 +4878,7 @@ k nastavení zesílení kroku použijte kolečko myši - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. @@ -4886,16 +4886,16 @@ k nastavení zesílení kroku použijte kolečko myši - Cut selected notes (Ctrl+X) - Vyjmout označené noty (Ctrl+X) + Cut selected notes (%1+X) + Vyjmout označené noty (%1+X) - Copy selected notes (Ctrl+C) - Kopírovat označené noty (Ctrl+C) + Copy selected notes (%1+C) + Kopírovat označené noty (%1+C) - Paste notes from clipboard (Ctrl+V) - Vložit noty ze schránky (Ctrl+V) + Paste notes from clipboard (%1+V) + Vložit noty ze schránky (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -4996,40 +4996,40 @@ Důvod: "%2" &Zpět - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo &Znovu - Ctrl+Y - Ctrl+Z + %1+Y + %1+Z &Copy &Kopírovat - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t &Vyjmout - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste V&ložit - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5040,56 +5040,56 @@ Důvod: "%2" &Tučné - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic &Kurzíva - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline &Podtržené - Ctrl+U - Ctrl+U + %1+U + %1+U &Left Zarovnat &vlevo - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter Zarovnat &na střed - Ctrl+E - Ctrl+E + %1+E + %1+E &Right Zarovnat v&pravo - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify Zarovnat &do bloku - Ctrl+J - Ctrl+R + %1+J + %1+R &Color... @@ -5323,8 +5323,8 @@ Důvod: "%2" Vložit - Mute/unmute (<Ctrl> + middle click) - Ztlumit/neztlumit (<Ctrl> + prostřední klik) + Mute/unmute (<%1> + middle click) + Ztlumit/neztlumit (<%1> + prostřední klik) Set/clear record @@ -5927,11 +5927,11 @@ Zpoždění %2 ms Rada - Press <Ctrl> to disable magnetic loop points. + Press <%1> to disable magnetic loop points. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. @@ -6007,16 +6007,16 @@ Přesvědčte se prosím, že máte právo ke čtení tohoto souboru a příslu Rada - Press <Ctrl> and drag to make a copy. - K vytvoření kopie stiskněte <Ctrl> a táhněte myší. + Press <%1> and drag to make a copy. + K vytvoření kopie stiskněte <%1> a táhněte myší. Current length Aktuální délka - Press <Ctrl> for free resizing. - Stiskněte <Ctrl> pro volné měnění velikosti. + Press <%1> for free resizing. + Stiskněte <%1> pro volné měnění velikosti. %1:%2 (%3:%4 to %5:%6) @@ -6039,14 +6039,14 @@ Přesvědčte se prosím, že máte právo ke čtení tohoto souboru a příslu Vložit - Mute/unmute (<Ctrl> + middle click) - Ztlumit/neztlumit (<Ctrl> + prostřední klik) + Mute/unmute (<%1> + middle click) + Ztlumit/neztlumit (<%1> + prostřední klik) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. diff --git a/data/locale/de.ts b/data/locale/de.ts index f7f7f1d64..cf40764d7 100644 --- a/data/locale/de.ts +++ b/data/locale/de.ts @@ -423,15 +423,15 @@ Wenn Sie daran interessiert sind LMMS in eine andere Sprache zu übersetzen oder Klicken Sie hier, um kubisches, hermetisches Fortschreiten als Automationsmuster auszuwählen. Der Wert des verbundenen Objekts wird in einer nahtlosen Kurve geändert und in Spitzen und Täler übergehen. - Cut selected values (Ctrl+X) + Cut selected values (%1+X) Ausgewählte Werte ausschneiden (Strg+X) - Copy selected values (Ctrl+C) + Copy selected values (%1+C) Ausgewählte Werte kopieren (Strg+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -462,7 +462,7 @@ Wenn Sie daran interessiert sind LMMS in eine andere Sprache zu übersetzen oder AutomationPattern - Drag a control while pressing <Ctrl> + Drag a control while pressing <%1> Ein Steuerelement mit <Strg> hier her ziehen @@ -4907,7 +4907,7 @@ Lautstärke eines Schritts kann mit dem Mausrad geändert werden Verstimmungsmodus (Shift+T) - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. Klicken Sie hier, um den Zeichnenmodus zu aktivieren. In diesem Modus können Sie Noten hinzufügen, in der Länge ändern und verschieben. Das ist der Standardmodus, der meistens benutzt wird. Sie können auch »Umschalt+D« auf Ihrer Tastatur drücken, um in diesen Modus zu gelangen. Halten Sie in diesem Modus Strg gedrückt, um vorübergehend in den Auswahlmodus zu wechslen. @@ -4915,7 +4915,7 @@ Lautstärke eines Schritts kann mit dem Mausrad geändert werden Klicken Sie hier, um den Radiermodus zu aktivieren. In diesem Modus können Sie einzelne Noten löschen. Sie können auch »Umschalt+E« auf Ihrer Tastatur drücken, um diesen Modus zu aktivieren. - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. Klicken Sie hier, um den Auswahlmodus zu aktivieren. In diesem Modus können Sie einzelne Noten auswählen. Alternativ können Sie auch Strg im Zeichnenmodus gedrückt halten, um vorrübergehend den Auswahlmodus zu benutzen. @@ -4923,15 +4923,15 @@ Lautstärke eines Schritts kann mit dem Mausrad geändert werden Klicken Sie hier und der Verstimmungmodus wird aktivert. In diesem Modus können Sie auf eine Note klicken, um die Automations-Verstimmung zu öffnen. Sie können diese benutzen, um von einer Note in eine andere zu rutschen. Sie können auch »Umschalt+T« auf Ihrer Tastatur drücken, um diesen Modus zu aktivieren. - Cut selected notes (Ctrl+X) + Cut selected notes (%1+X) Ausgewählte Noten ausschneiden (Strg+X) - Copy selected notes (Ctrl+C) + Copy selected notes (%1+C) Ausgewählte Noten kopieren (Strg+C) - Paste notes from clipboard (Ctrl+V) + Paste notes from clipboard (%1+V) Noten aus Zwischenablage einfügen (Strg+V) @@ -5033,7 +5033,7 @@ Grund: »%2« &Rückgängig - Ctrl+Z + %1+Z Strg+Z @@ -5041,7 +5041,7 @@ Grund: »%2« Wiede&rholen - Ctrl+Y + %1+Y Strg+Y @@ -5049,7 +5049,7 @@ Grund: »%2« &Kopieren - Ctrl+C + %1+C Strg+C @@ -5057,7 +5057,7 @@ Grund: »%2« A&usschneiden - Ctrl+X + %1+X Strg+X @@ -5065,7 +5065,7 @@ Grund: »%2« &Einfügen - Ctrl+V + %1+V Strg+V @@ -5077,7 +5077,7 @@ Grund: »%2« &Fett - Ctrl+B + %1+B Strg+F @@ -5085,7 +5085,7 @@ Grund: »%2« &Kursiv - Ctrl+I + %1+I Strg+K @@ -5093,7 +5093,7 @@ Grund: »%2« &Unterstrichen - Ctrl+U + %1+U Strg+U @@ -5101,7 +5101,7 @@ Grund: »%2« &Links - Ctrl+L + %1+L Strg+L @@ -5109,7 +5109,7 @@ Grund: »%2« Z&entriert - Ctrl+E + %1+E Strg+Z @@ -5117,7 +5117,7 @@ Grund: »%2« &Rechts - Ctrl+R + %1+R Strg+R @@ -5125,7 +5125,7 @@ Grund: »%2« &Blocksatz - Ctrl+J + %1+J Strg+J @@ -5360,7 +5360,7 @@ Grund: »%2« Einfügen - Mute/unmute (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) Stumm/Laut schalten (<Strg> + Mittelklick) @@ -5963,11 +5963,11 @@ Latenz: %2 ms Tipp - Press <Ctrl> to disable magnetic loop points. + Press <%1> to disable magnetic loop points. Drücken Sie <Strg>, um magnetische Loop-Punkte zu deaktivieren. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. Halten Sie <Umschalt>, um den Anfangs-Loop-Punkt zu verschieben; Drücken Sie <Strg>, um magnetische Loop-Punkte zu deaktivieren. @@ -6043,7 +6043,7 @@ Bitte stellen Sie sicher, dass Sie Leserechte auf diese Datei sowie das Verzeich Tipp - Press <Ctrl> and drag to make a copy. + Press <%1> and drag to make a copy. <Strg> drücken und ziehen, um eine Kopie zu erstellen. @@ -6051,7 +6051,7 @@ Bitte stellen Sie sicher, dass Sie Leserechte auf diese Datei sowie das Verzeich Aktuelle Länge - Press <Ctrl> for free resizing. + Press <%1> for free resizing. Drücken Sie <Strg> für freie Größenänderung. @@ -6075,14 +6075,14 @@ Bitte stellen Sie sicher, dass Sie Leserechte auf diese Datei sowie das Verzeich Einfügen - Mute/unmute (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) Stumm/Laut schalten (<Strg> + Mittelklick) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. Drücken Sie <Strg> während des Klicks auf den Verschiebe-Griff, um eine neue Klicken und Ziehen-Aktion zu beginnen. diff --git a/data/locale/en.ts b/data/locale/en.ts index 7774bc923..36bbc7a91 100644 --- a/data/locale/en.ts +++ b/data/locale/en.ts @@ -421,15 +421,15 @@ If you're interested in translating LMMS in another language or want to imp - Cut selected values (Ctrl+X) + Cut selected values (%1+X) - Copy selected values (Ctrl+C) + Copy selected values (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -460,7 +460,7 @@ If you're interested in translating LMMS in another language or want to imp AutomationPattern - Drag a control while pressing <Ctrl> + Drag a control while pressing <%1> @@ -4862,7 +4862,7 @@ use mouse wheel to set volume of a step - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. @@ -4870,7 +4870,7 @@ use mouse wheel to set volume of a step - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. @@ -4878,15 +4878,15 @@ use mouse wheel to set volume of a step - Cut selected notes (Ctrl+X) + Cut selected notes (%1+X) - Copy selected notes (Ctrl+C) + Copy selected notes (%1+C) - Paste notes from clipboard (Ctrl+V) + Paste notes from clipboard (%1+V) @@ -4987,7 +4987,7 @@ Reason: "%2" - Ctrl+Z + %1+Z @@ -4995,7 +4995,7 @@ Reason: "%2" - Ctrl+Y + %1+Y @@ -5003,7 +5003,7 @@ Reason: "%2" - Ctrl+C + %1+C @@ -5011,7 +5011,7 @@ Reason: "%2" - Ctrl+X + %1+X @@ -5019,7 +5019,7 @@ Reason: "%2" - Ctrl+V + %1+V @@ -5031,7 +5031,7 @@ Reason: "%2" - Ctrl+B + %1+B @@ -5039,7 +5039,7 @@ Reason: "%2" - Ctrl+I + %1+I @@ -5047,7 +5047,7 @@ Reason: "%2" - Ctrl+U + %1+U @@ -5055,7 +5055,7 @@ Reason: "%2" - Ctrl+L + %1+L @@ -5063,7 +5063,7 @@ Reason: "%2" - Ctrl+E + %1+E @@ -5071,7 +5071,7 @@ Reason: "%2" - Ctrl+R + %1+R @@ -5079,7 +5079,7 @@ Reason: "%2" - Ctrl+J + %1+J @@ -5314,7 +5314,7 @@ Reason: "%2" - Mute/unmute (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) @@ -5916,11 +5916,11 @@ Latency: %2 ms - Press <Ctrl> to disable magnetic loop points. + Press <%1> to disable magnetic loop points. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. @@ -5994,7 +5994,7 @@ Please make sure you have read-permission to the file and the directory containi - Press <Ctrl> and drag to make a copy. + Press <%1> and drag to make a copy. @@ -6002,7 +6002,7 @@ Please make sure you have read-permission to the file and the directory containi - Press <Ctrl> for free resizing. + Press <%1> for free resizing. @@ -6026,14 +6026,14 @@ Please make sure you have read-permission to the file and the directory containi - Mute/unmute (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. diff --git a/data/locale/es.ts b/data/locale/es.ts index 020807c88..ac0a5d7a2 100644 --- a/data/locale/es.ts +++ b/data/locale/es.ts @@ -421,15 +421,15 @@ If you're interested in translating LMMS in another language or want to imp - Cut selected values (Ctrl+X) + Cut selected values (%1+X) - Copy selected values (Ctrl+C) + Copy selected values (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -460,7 +460,7 @@ If you're interested in translating LMMS in another language or want to imp AutomationPattern - Drag a control while pressing <Ctrl> + Drag a control while pressing <%1> @@ -4862,7 +4862,7 @@ use mouse wheel to set volume of a step - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. @@ -4870,7 +4870,7 @@ use mouse wheel to set volume of a step - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. @@ -4878,16 +4878,16 @@ use mouse wheel to set volume of a step - Cut selected notes (Ctrl+X) - Cortar las notas seleccionadas (Ctrl+X) + Cut selected notes (%1+X) + Cortar las notas seleccionadas (%1+X) - Copy selected notes (Ctrl+C) - Copiar las notas seleccionadas (Ctrl+C) + Copy selected notes (%1+C) + Copiar las notas seleccionadas (%1+C) - Paste notes from clipboard (Ctrl+V) - Pegar notas desde el portapapeles (Ctrl+V) + Paste notes from clipboard (%1+V) + Pegar notas desde el portapapeles (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -4987,40 +4987,40 @@ Reason: "%2" &Deshacer - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo &Rehacer - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy &Copiar - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t Cortar(&X) - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste &Pegar - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5031,56 +5031,56 @@ Reason: "%2" &Negrita - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic &Cursiva - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline &Subrayado - Ctrl+U - Ctrl+U + %1+U + %1+U &Left &Izquierda - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter C&entrar - Ctrl+E - Ctrl+E + %1+E + %1+E &Right &Derecha - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify &Justificar - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5314,7 +5314,7 @@ Reason: "%2" Pegar - Mute/unmute (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) @@ -5916,11 +5916,11 @@ Latency: %2 ms - Press <Ctrl> to disable magnetic loop points. + Press <%1> to disable magnetic loop points. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. @@ -5994,7 +5994,7 @@ Please make sure you have read-permission to the file and the directory containi - Press <Ctrl> and drag to make a copy. + Press <%1> and drag to make a copy. @@ -6002,7 +6002,7 @@ Please make sure you have read-permission to the file and the directory containi - Press <Ctrl> for free resizing. + Press <%1> for free resizing. @@ -6026,14 +6026,14 @@ Please make sure you have read-permission to the file and the directory containi Pegar - Mute/unmute (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. diff --git a/data/locale/fa.ts b/data/locale/fa.ts index cd8d4f905..725bdff69 100644 --- a/data/locale/fa.ts +++ b/data/locale/fa.ts @@ -421,15 +421,15 @@ If you're interested in translating LMMS in another language or want to imp - Cut selected values (Ctrl+X) + Cut selected values (%1+X) - Copy selected values (Ctrl+C) + Copy selected values (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -460,7 +460,7 @@ If you're interested in translating LMMS in another language or want to imp AutomationPattern - Drag a control while pressing <Ctrl> + Drag a control while pressing <%1> @@ -4862,7 +4862,7 @@ use mouse wheel to set volume of a step - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. @@ -4870,7 +4870,7 @@ use mouse wheel to set volume of a step - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. @@ -4878,15 +4878,15 @@ use mouse wheel to set volume of a step - Cut selected notes (Ctrl+X) + Cut selected notes (%1+X) برش نت های انتخاب شده(Ctrl+X) - Copy selected notes (Ctrl+C) + Copy selected notes (%1+C) کپی نت های انتخاب شده(Ctrl+C) - Paste notes from clipboard (Ctrl+V) + Paste notes from clipboard (%1+V) چسباندن نت ها از حافظه ی موقت(Ctrl+V) @@ -4987,40 +4987,40 @@ Reason: "%2" &واچینی - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo &بازچینی - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy &کپی - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t &برش - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste &چسباندن - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5031,56 +5031,56 @@ Reason: "%2" &برجسته - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic &خوابیده - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline &زیرخط - Ctrl+U - Ctrl+U + %1+U + %1+U &Left &چپ - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter &مرکز - Ctrl+E - Ctrl+E + %1+E + %1+E &Right &راست - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify &تراز - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5314,7 +5314,7 @@ Reason: "%2" چسباندن - Mute/unmute (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) @@ -5916,11 +5916,11 @@ Latency: %2 ms - Press <Ctrl> to disable magnetic loop points. + Press <%1> to disable magnetic loop points. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. @@ -5994,7 +5994,7 @@ Please make sure you have read-permission to the file and the directory containi - Press <Ctrl> and drag to make a copy. + Press <%1> and drag to make a copy. @@ -6002,7 +6002,7 @@ Please make sure you have read-permission to the file and the directory containi - Press <Ctrl> for free resizing. + Press <%1> for free resizing. @@ -6026,14 +6026,14 @@ Please make sure you have read-permission to the file and the directory containi چسباندن - Mute/unmute (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. diff --git a/data/locale/fr.ts b/data/locale/fr.ts index e3b21e538..c27aace22 100644 --- a/data/locale/fr.ts +++ b/data/locale/fr.ts @@ -421,16 +421,16 @@ If you're interested in translating LMMS in another language or want to imp Cliquez ici pour choisir la progression cubique de Hermite pour ce motif d'automation. La valeur de l'objet connecté changera suivant une courbe lisse et adoucira les pics et les creux. - Cut selected values (Ctrl+X) - Couper les valeurs sélectionnées (Ctrl+X) + Cut selected values (%1+X) + Couper les valeurs sélectionnées (%1+X) - Copy selected values (Ctrl+C) - Copier les valeurs sélectionnées (Ctrl+C) + Copy selected values (%1+C) + Copier les valeurs sélectionnées (%1+C) - Paste values from clipboard Ctrl+V) - Coller les valeurs depuis le presse-papier (Ctrl+V) + Paste values from clipboard (%1+V) + Coller les valeurs depuis le presse-papier (%1+V) Click here and selected values will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -464,8 +464,8 @@ If you're interested in translating LMMS in another language or want to imp AutomationPattern - Drag a control while pressing <Ctrl> - Déplacer un contrôle en appuyant sur <Ctrl> + Drag a control while pressing <%1> + Déplacer un contrôle en appuyant sur <%1> @@ -3922,11 +3922,11 @@ Veuillez visiter http://lmms.sf.net/wiki pour la documentation de LMMS.Modulation - Breath Ctrl + Breath %1 Contrôle par le souffle - Foot Ctrl + Foot %1 Contrôle par pédale @@ -5376,32 +5376,32 @@ utilisez la molette de la souris pour régler le volume d'un pasMode désaccordage (Shift+T) - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. - Cliquez ici et le mode dessin sera activé. Dans ce mode vous pourrez ajouter, redimensionner et déplacer des notes. Ceci est le mode par défaut qui est utilisé la plupart du temps. Vous pouvez aussi appuyer sur les touches 'Shift+D' de votre clavier pour activer ce mode. Dans ce mode, appuyez sur Ctrl pour passer temporairement dans le mode sélection. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. + Cliquez ici et le mode dessin sera activé. Dans ce mode vous pourrez ajouter, redimensionner et déplacer des notes. Ceci est le mode par défaut qui est utilisé la plupart du temps. Vous pouvez aussi appuyer sur les touches 'Shift+D' de votre clavier pour activer ce mode. Dans ce mode, appuyez sur %1 pour passer temporairement dans le mode sélection. Click here and erase mode will be activated. In this mode you can erase notes. You can also press 'Shift+E' on your keyboard to activate this mode. Cliquez ici et le mode effacement sera activé. Dans ce mode vous pourrez effacer des notes. Vous pouvez aussi appuyer sur les touches 'Shift+E' de votre clavier pour activer ce mode. - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. - Cliquez ici et le mode sélection sera activé. Dans ce mode vous pourrez sélectionner des notes. Dans ce mode, appuyez appuyer sur Ctrl pour passer temporairement en mode dessin. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. + Cliquez ici et le mode sélection sera activé. Dans ce mode vous pourrez sélectionner des notes. Dans ce mode, appuyez appuyer sur %1 pour passer temporairement en mode dessin. Click here and detune mode will be activated. In this mode you can click a note to open its automation detuning. You can utilize this to slide notes from one to another. You can also press 'Shift+T' on your keyboard to activate this mode. Cliquez ici et le mode désaccordage sera activé. Dans ce mode vous pourrer cliquer sur une note pour accéder à l'automation de son désaccordage. Vous pouvez utiliser ceci pour lier des notes entre-elles. Vous pouvez aussi appuyer sur les touches 'Shift+T' de votre clavier pour activer ce mode. - Cut selected notes (Ctrl+X) - Couper les notes sélectionnées (Ctrl+X) + Cut selected notes (%1+X) + Couper les notes sélectionnées (%1+X) - Copy selected notes (Ctrl+C) - Copier les notes sélectionnées (Ctrl+C) + Copy selected notes (%1+C) + Copier les notes sélectionnées (%1+C) - Paste notes from clipboard (Ctrl+V) - Coller les notes se trouvant dans le presse-papier (Ctrl+V) + Paste notes from clipboard (%1+V) + Coller les notes se trouvant dans le presse-papier (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -5502,40 +5502,40 @@ Raison : "%2" &Défaire - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo &Refaire - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy &Copier - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t Cou&per - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste Co&ller - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5546,56 +5546,56 @@ Raison : "%2" Gr&as - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic &Italique - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline &Souligné - Ctrl+U - Ctrl+U + %1+U + %1+U &Left &Gauche - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter C&entrer - Ctrl+E - Ctrl+E + %1+E + %1+E &Right D&roite - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify &Justifier - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5829,8 +5829,8 @@ Raison : "%2" Coller - Mute/unmute (<Ctrl> + middle click) - Couper/Jouer (<Ctrl> + clic-milieu) + Mute/unmute (<%1> + middle click) + Couper/Jouer (<%1> + clic-milieu) Set/clear record @@ -6465,12 +6465,12 @@ Veuillez vérifier que vous avez les droits en lecture pour ce fichier et le ré Astuce - Press <Ctrl> to disable magnetic loop points. - Appuyez sur <Ctrl> pour désactiver les marqueur magnétiques de jeu en boucle. + Press <%1> to disable magnetic loop points. + Appuyez sur <%1> pour désactiver les marqueur magnétiques de jeu en boucle. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. - Maintenez <Shift> pour déplacer le marqueur de début de jeu en boucle. Appuyez sur <Ctrl> pour désactiver les marqueurs magnétiques de jeu en boucle. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. + Maintenez <Shift> pour déplacer le marqueur de début de jeu en boucle. Appuyez sur <%1> pour désactiver les marqueurs magnétiques de jeu en boucle. @@ -6545,16 +6545,16 @@ Veuillez vérifier que vous avez les droits en lecture pour ce fichier et le ré Astuce - Press <Ctrl> and drag to make a copy. - Appuyez sur <Ctrl> et glissez pour faire une copie. + Press <%1> and drag to make a copy. + Appuyez sur <%1> et glissez pour faire une copie. Current length Longueur actuelle - Press <Ctrl> for free resizing. - Appuyez sur <Ctrl> pour un redimensionnement libre. + Press <%1> for free resizing. + Appuyez sur <%1> pour un redimensionnement libre. %1:%2 (%3:%4 to %5:%6) @@ -6577,15 +6577,15 @@ Veuillez vérifier que vous avez les droits en lecture pour ce fichier et le ré Coller - Mute/unmute (<Ctrl> + middle click) - Couper/Jouer (<Ctrl> + clic-milieu) + Mute/unmute (<%1> + middle click) + Couper/Jouer (<%1> + clic-milieu) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. - Appuyez sur <Ctrl> en cliquant sur la poignée de déplacement pour commencer un nouveau glisser/déposer. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. + Appuyez sur <%1> en cliquant sur la poignée de déplacement pour commencer un nouveau glisser/déposer. Actions for this track diff --git a/data/locale/gl.ts b/data/locale/gl.ts index 738561f23..7b95181b9 100644 --- a/data/locale/gl.ts +++ b/data/locale/gl.ts @@ -423,15 +423,15 @@ Se lle interesa traducir o LMMS a outro idioma ou desexa mellorar as traducións - Cut selected values (Ctrl+X) - Recortar os valores escollidos (Ctrl+X) + Cut selected values (%1+X) + Recortar os valores escollidos (%1+X) - Copy selected values (Ctrl+C) - Copiar os valores escollidos (Ctrl+C) + Copy selected values (%1+C) + Copiar os valores escollidos (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -462,8 +462,8 @@ Se lle interesa traducir o LMMS a outro idioma ou desexa mellorar as traducións AutomationPattern - Drag a control while pressing <Ctrl> - Arrastre un control mentres ten <Ctrl> premido + Drag a control while pressing <%1> + Arrastre un control mentres ten <%1> premido Model is already connected to this pattern. @@ -4879,32 +4879,32 @@ empregue a roda do rato para modificar o volume un paso Modo de desafinación (Maiúsculas+T) - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. - Prema aquí e o activarase o modo de debuxo. Neste modo pode engadir e mover valores individuais. Este é o modo por omisión que se emprega a maior parte do tempo. Tamén pode premer «Maiúsculas+D» no teclado para activar este modo. Neste modo, manteña Ctrl para ir temporalmente ao modo de selección. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. + Prema aquí e o activarase o modo de debuxo. Neste modo pode engadir e mover valores individuais. Este é o modo por omisión que se emprega a maior parte do tempo. Tamén pode premer «Maiúsculas+D» no teclado para activar este modo. Neste modo, manteña %1 para ir temporalmente ao modo de selección. Click here and erase mode will be activated. In this mode you can erase notes. You can also press 'Shift+E' on your keyboard to activate this mode. Prema aquí e activarase o modo de borrado. Neste modo pódense borrar valores individuais. Tamén pode premer «Maiúsculas+E» no teclado para activar este modo. - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. - Prema aquí e activarase o modo de borrado. Neste modo pódense borrar valores individuais. Como alternativa pode premer Ctrl no modo de debuxo para empregar temporalmente o modo de selección. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. + Prema aquí e activarase o modo de borrado. Neste modo pódense borrar valores individuais. Como alternativa pode premer %1 no modo de debuxo para empregar temporalmente o modo de selección. Click here and detune mode will be activated. In this mode you can click a note to open its automation detuning. You can utilize this to slide notes from one to another. You can also press 'Shift+T' on your keyboard to activate this mode. Prema aquí e actívase o modo de desafinación.Neste modo pódese premer unhanota para abrir a súa desafinación de automatización. Pódese empregar isto para escorregar entre as notas. Tamén se pode premer «Maiúsculas+T» no teclado para activar este mdo. - Cut selected notes (Ctrl+X) - Recortar as notas escollidas (Ctrl+X) + Cut selected notes (%1+X) + Recortar as notas escollidas (%1+X) - Copy selected notes (Ctrl+C) - Copiar as notas escollidas (Ctrl+C) + Copy selected notes (%1+C) + Copiar as notas escollidas (%1+C) - Paste notes from clipboard (Ctrl+V) - Apegar as notas do porta-retallos (Ctrl+V) + Paste notes from clipboard (%1+V) + Apegar as notas do porta-retallos (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -5005,40 +5005,40 @@ Razón: «%2» Desfa&cer - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo &Refacer - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy &Copiar - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t Cor&tar - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste A&pegar - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5049,56 +5049,56 @@ Razón: «%2» &Negrita - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic Cursi&va - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline S&ubliñado - Ctrl+U - Ctrl+U + %1+U + %1+U &Left &Esquerda - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter C&entro - Ctrl+E - Ctrl+E + %1+E + %1+E &Right De&reita - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify &Xustificar - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5332,8 +5332,8 @@ Razón: «%2» Apegar - Mute/unmute (<Ctrl> + middle click) - Silenciar/Darlle volume (<Ctrl> + botón central do rato) + Mute/unmute (<%1> + middle click) + Silenciar/Darlle volume (<%1> + botón central do rato) Set/clear record @@ -5935,11 +5935,11 @@ Latencia: %2 ms Suxestión - Press <Ctrl> to disable magnetic loop points. + Press <%1> to disable magnetic loop points. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. @@ -6015,16 +6015,16 @@ Asegúrese de ter permiso de lectura sobre o ficheiro e o directorio que o cont Suxestión - Press <Ctrl> and drag to make a copy. - Prema <Ctrl> e arrastre para facer unha copia. + Press <%1> and drag to make a copy. + Prema <%1> e arrastre para facer unha copia. Current length Duración actual - Press <Ctrl> for free resizing. - Prema <Ctrl> para modificar o tamaño libremente + Press <%1> for free resizing. + Prema <%1> para modificar o tamaño libremente %1:%2 (%3:%4 to %5:%6) @@ -6047,15 +6047,15 @@ Asegúrese de ter permiso de lectura sobre o ficheiro e o directorio que o cont Apegar - Mute/unmute (<Ctrl> + middle click) - Silenciar/Darlle volume (<Ctrl> + botón central do rato) + Mute/unmute (<%1> + middle click) + Silenciar/Darlle volume (<%1> + botón central do rato) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. - Prema <Ctrl> mentres ten a asa de mover premida para iniciar unha acción de arrastrar e soltar. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. + Prema <%1> mentres ten a asa de mover premida para iniciar unha acción de arrastrar e soltar. Actions for this track diff --git a/data/locale/it.ts b/data/locale/it.ts index 39829804f..55ca5feb5 100644 --- a/data/locale/it.ts +++ b/data/locale/it.ts @@ -424,15 +424,15 @@ Se sei interessato a tradurre LMMS o vuoi migliorare una traduzione esistente, s Clicca qui per scegliere il metodo di progressione a cubica di Hermite per questo pattern di automazione. Il valore della variabile connessa cambierà seguendo una curva morbida. - Cut selected values (Ctrl+X) - Taglia i valori selezionati (Ctrl+X) + Cut selected values (%1+X) + Taglia i valori selezionati (%1+X) - Copy selected values (Ctrl+C) - Copia i valori selezionati (Ctrl+C) + Copy selected values (%1+C) + Copia i valori selezionati (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -463,8 +463,8 @@ Se sei interessato a tradurre LMMS o vuoi migliorare una traduzione esistente, s AutomationPattern - Drag a control while pressing <Ctrl> - Trascina un controllo tenendo premuto <Ctrl> + Drag a control while pressing <%1> + Trascina un controllo tenendo premuto <%1> Model is already connected to this pattern. @@ -4903,7 +4903,7 @@ la rotellina del mouse impostare il volume delle note Modalità intonanzione (Shift+T) - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. Cliccando qui si attiva la modalità disegno. In questa modalità è possibile aggiungere e spostare singoli valori. Questa è la modalità predefinita, che viene usata la maggior parte del tempo. Questa modalità si attiva anche premendo la combinazione di tasti 'Shift+D'. Tieni premuto Ctfl per andare temporaneamente in modalità selezione. @@ -4911,24 +4911,24 @@ la rotellina del mouse impostare il volume delle note Cliccando qui si attiva la modalità cancellazione. In questa modalità è possibile cancellare singoli valori. Questa modalità si attiva anche premendo la combinazione di tasti 'Shift+E'. - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. - Cliccando qui viene attivata la modalità selezione. Puoi selezionare le note. Puoi anche tenere premuto Ctrl durante la modalità disegno per usare la modalità selezione temporaneamente. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. + Cliccando qui viene attivata la modalità selezione. Puoi selezionare le note. Puoi anche tenere premuto %1 durante la modalità disegno per usare la modalità selezione temporaneamente. Click here and detune mode will be activated. In this mode you can click a note to open its automation detuning. You can utilize this to slide notes from one to another. You can also press 'Shift+T' on your keyboard to activate this mode. Cliccando qui viene attivata la modalità intonazione. Puoi cliccare una nota per aprire la finestra di automazione dell'intonazione. Puoi usare questa modalità per fare uno slide da una nota ad un'altra. Puoi anche premere Shift+T per attivare questa modalità. - Cut selected notes (Ctrl+X) - Taglia le note selezionate (Ctrl+X) + Cut selected notes (%1+X) + Taglia le note selezionate (%1+X) - Copy selected notes (Ctrl+C) - Copia le note selezionate (Ctrl+C) + Copy selected notes (%1+C) + Copia le note selezionate (%1+C) - Paste notes from clipboard (Ctrl+V) - Incolla le note selezionate (Ctrl+V) + Paste notes from clipboard (%1+V) + Incolla le note selezionate (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -5029,40 +5029,40 @@ Motivo: "%2" &Annulla operazione - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo &Ripeti operazione - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy &Copia - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t &Taglia - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste &Incolla - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5073,56 +5073,56 @@ Motivo: "%2" &Grassetto - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic &Corsivo - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline &Sottolineato - Ctrl+U - Ctrl+U + %1+U + %1+U &Left &Sinistra - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter &Centro - Ctrl+E - Ctrl+E + %1+E + %1+E &Right &Destra - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify &Giustifica - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5356,8 +5356,8 @@ Motivo: "%2" Incolla - Mute/unmute (<Ctrl> + middle click) - Attiva/disattiva la modalità muta (<Ctrl> + tasto centrale) + Mute/unmute (<%1> + middle click) + Attiva/disattiva la modalità muta (<%1> + tasto centrale) Set/clear record @@ -5960,12 +5960,12 @@ Assicurati di avere almeno i permessi di lettura del file e prova di nuovo.Suggerimento - Press <Ctrl> to disable magnetic loop points. - Premi <Ctrl> per disabilitare i punti di loop magnetici. + Press <%1> to disable magnetic loop points. + Premi <%1> per disabilitare i punti di loop magnetici. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. - Tieni premuto <Shift> per spostare l'inizio del punto di loop; premi <Ctrl> per disabilitare i punti di loop magnetici. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. + Tieni premuto <Shift> per spostare l'inizio del punto di loop; premi <%1> per disabilitare i punti di loop magnetici. @@ -6040,16 +6040,16 @@ Assicurarsi di avere i permessi in lettura per il file e per la directory che lo Suggerimento - Press <Ctrl> and drag to make a copy. - Premere <Ctrl>, cliccare e trascinare per copiare. + Press <%1> and drag to make a copy. + Premere <%1>, cliccare e trascinare per copiare. Current length Lunghezza attuale - Press <Ctrl> for free resizing. - Premere <Ctrl> per ridimensionare liberamente. + Press <%1> for free resizing. + Premere <%1> per ridimensionare liberamente. %1:%2 (%3:%4 to %5:%6) @@ -6072,15 +6072,15 @@ Assicurarsi di avere i permessi in lettura per il file e per la directory che lo Incolla - Mute/unmute (<Ctrl> + middle click) - Attiva/disattiva la modalità muta (<Ctrl> + tasto centrale) + Mute/unmute (<%1> + middle click) + Attiva/disattiva la modalità muta (<%1> + tasto centrale) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. - Premere <Ctrl> mentre si clicca sulla maniglia per lo spostamento per iniziare una nuova azione di drag'n'drop. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. + Premere <%1> mentre si clicca sulla maniglia per lo spostamento per iniziare una nuova azione di drag'n'drop. Actions for this track diff --git a/data/locale/ja.ts b/data/locale/ja.ts index 41c591d38..c9660cf1b 100644 --- a/data/locale/ja.ts +++ b/data/locale/ja.ts @@ -423,15 +423,15 @@ If you're interested in translating LMMS in another language or want to imp - Cut selected values (Ctrl+X) + Cut selected values (%1+X) 選択した値を切り取り (Shift+M) - Copy selected values (Ctrl+C) - 選択した値をコピー (Ctrl+C) + Copy selected values (%1+C) + 選択した値をコピー (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -462,8 +462,8 @@ If you're interested in translating LMMS in another language or want to imp AutomationPattern - Drag a control while pressing <Ctrl> - <Ctrl>を押しながらコントロールをドラッグしてください + Drag a control while pressing <%1> + <%1>を押しながらコントロールをドラッグしてください Model is already connected to this pattern. @@ -4881,32 +4881,32 @@ use mouse wheel to set volume of a step ディチューン モード (Shift+T) - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. - ここをクリックすると描画モードになります。描画モードでは個々のノートを追加・リサイズ・移動することができます。普段このモードをデフォルトで使用します。'Shift+D' を押してもこのモードになります。このモードではCtrlを長押しすることで一時的に選択モードにすることができます。 + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. + ここをクリックすると描画モードになります。描画モードでは個々のノートを追加・リサイズ・移動することができます。普段このモードをデフォルトで使用します。'Shift+D' を押してもこのモードになります。このモードでは%1を長押しすることで一時的に選択モードにすることができます。 Click here and erase mode will be activated. In this mode you can erase notes. You can also press 'Shift+E' on your keyboard to activate this mode. ここをクリックすると消去モードになります。消去モードでは個々のノートを消去することができます。'Shift+E' を押してもこのモードにすることができます。 - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. - ここをクリックすると選択モードになります。選択モードでは個々のノートを選択することができます。また、描画モード中にCtrlを長押しすることで一時的に選択モードを使用することができます。 + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. + ここをクリックすると選択モードになります。選択モードでは個々のノートを選択することができます。また、描画モード中に%1を長押しすることで一時的に選択モードを使用することができます。 Click here and detune mode will be activated. In this mode you can click a note to open its automation detuning. You can utilize this to slide notes from one to another. You can also press 'Shift+T' on your keyboard to activate this mode. - Cut selected notes (Ctrl+X) - 選択したノートの切り取り (Ctrl+X) + Cut selected notes (%1+X) + 選択したノートの切り取り (%1+X) - Copy selected notes (Ctrl+C) - 選択したノートのコピー (Ctrl+C) + Copy selected notes (%1+C) + 選択したノートのコピー (%1+C) - Paste notes from clipboard (Ctrl+V) - クリップボードからノートを貼り付け (Ctrl+V) + Paste notes from clipboard (%1+V) + クリップボードからノートを貼り付け (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -5007,40 +5007,40 @@ Reason: "%2" 元に戻す(&U) - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo やり直し(&R) - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy コピー(&C) - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t 切り取り(&t) - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste 貼り付け(&P) - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5051,56 +5051,56 @@ Reason: "%2" 太字(&B) - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic 斜体(&I) - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline 下線(&U) - Ctrl+U - Ctrl+U + %1+U + %1+U &Left 左揃え(&L) - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter 中央揃え(&e) - Ctrl+E - Ctrl+E + %1+E + %1+E &Right 右揃え(&R) - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify 両端揃え(&J) - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5334,8 +5334,8 @@ Reason: "%2" 貼り付け - Mute/unmute (<Ctrl> + middle click) - ミュート/ミュート解除(<Ctrl> + 中ボタンクリック） + Mute/unmute (<%1> + middle click) + ミュート/ミュート解除(<%1> + 中ボタンクリック） Set/clear record @@ -5938,11 +5938,11 @@ Latency: %2 ms ヒント - Press <Ctrl> to disable magnetic loop points. - マグネティック ループポイントを無効化するには<Ctrl>を押してください。 + Press <%1> to disable magnetic loop points. + マグネティック ループポイントを無効化するには<%1>を押してください。 - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. @@ -6018,16 +6018,16 @@ Please make sure you have read-permission to the file and the directory containi ヒント - Press <Ctrl> and drag to make a copy. - コピーするには<Ctrl>を押しながらドラッグしてください。 + Press <%1> and drag to make a copy. + コピーするには<%1>を押しながらドラッグしてください。 Current length 現在の長さ - Press <Ctrl> for free resizing. - フリーズ解除には<Ctrl>を押してください。 + Press <%1> for free resizing. + フリーズ解除には<%1>を押してください。 %1:%2 (%3:%4 to %5:%6) @@ -6050,15 +6050,15 @@ Please make sure you have read-permission to the file and the directory containi 貼り付け - Mute/unmute (<Ctrl> + middle click) - ミュート/ミュート解除(<Ctrl> + 中ボタンクリック） + Mute/unmute (<%1> + middle click) + ミュート/ミュート解除(<%1> + 中ボタンクリック） TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. - 新しいドラッグ＆ドロップアクションを開始するには、移動グリップをクリック中に <Ctrl>を押してください。 + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. + 新しいドラッグ＆ドロップアクションを開始するには、移動グリップをクリック中に <%1>を押してください。 Actions for this track diff --git a/data/locale/ko.ts b/data/locale/ko.ts index 93c7a7e46..91186d456 100644 --- a/data/locale/ko.ts +++ b/data/locale/ko.ts @@ -421,15 +421,15 @@ If you're interested in translating LMMS in another language or want to imp - Cut selected values (Ctrl+X) - 선택된 값 잘라내기 (Ctrl+X) + Cut selected values (%1+X) + 선택된 값 잘라내기 (%1+X) - Copy selected values (Ctrl+C) - 선택된 값 복사 (Ctrl+C) + Copy selected values (%1+C) + 선택된 값 복사 (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -460,8 +460,8 @@ If you're interested in translating LMMS in another language or want to imp AutomationPattern - Drag a control while pressing <Ctrl> - <Ctrl> 누르는 동안 제어를 끌기 + Drag a control while pressing <%1> + <%1> 누르는 동안 제어를 끌기 Model is already connected to this pattern. @@ -4864,7 +4864,7 @@ use mouse wheel to set volume of a step - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. @@ -4872,7 +4872,7 @@ use mouse wheel to set volume of a step - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. @@ -4880,16 +4880,16 @@ use mouse wheel to set volume of a step - Cut selected notes (Ctrl+X) - 선택 박자를 잘라내기 (Ctrl+X) + Cut selected notes (%1+X) + 선택 박자를 잘라내기 (%1+X) - Copy selected notes (Ctrl+C) - 선택 박자를 복사 (Ctrl+C) + Copy selected notes (%1+C) + 선택 박자를 복사 (%1+C) - Paste notes from clipboard (Ctrl+V) - 클립보드에서 박자 붙여넣기 (Ctrl+V) + Paste notes from clipboard (%1+V) + 클립보드에서 박자 붙여넣기 (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -4990,7 +4990,7 @@ Reason: "%2" 작업 취소(&U) - Ctrl+Z + %1+Z @@ -4998,7 +4998,7 @@ Reason: "%2" 작업 재실행(&R) - Ctrl+Y + %1+Y @@ -5006,7 +5006,7 @@ Reason: "%2" 복사(&C) - Ctrl+C + %1+C @@ -5014,7 +5014,7 @@ Reason: "%2" 잘라내기(&T) - Ctrl+X + %1+X @@ -5022,7 +5022,7 @@ Reason: "%2" 붙여넣기(&P) - Ctrl+V + %1+V @@ -5034,7 +5034,7 @@ Reason: "%2" 진하게(&B) - Ctrl+B + %1+B @@ -5042,7 +5042,7 @@ Reason: "%2" 기울임(&I) - Ctrl+I + %1+I @@ -5050,7 +5050,7 @@ Reason: "%2" 밑줄(&U) - Ctrl+U + %1+U @@ -5058,7 +5058,7 @@ Reason: "%2" 왼쪽(&L) - Ctrl+L + %1+L @@ -5066,7 +5066,7 @@ Reason: "%2" 중앙(&E) - Ctrl+E + %1+E @@ -5074,7 +5074,7 @@ Reason: "%2" 오른쪽(&R) - Ctrl+R + %1+R @@ -5082,7 +5082,7 @@ Reason: "%2" 양쪽 배분(&J) - Ctrl+J + %1+J @@ -5317,8 +5317,8 @@ Reason: "%2" 붙여넣기 - Mute/unmute (<Ctrl> + middle click) - 무음/무음해제 (<Ctrl> + 중간 클릭) + Mute/unmute (<%1> + middle click) + 무음/무음해제 (<%1> + 중간 클릭) Set/clear record @@ -5921,11 +5921,11 @@ Latency: %2 ms 힌트 - Press <Ctrl> to disable magnetic loop points. + Press <%1> to disable magnetic loop points. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. @@ -5999,16 +5999,16 @@ Please make sure you have read-permission to the file and the directory containi 힌트 - Press <Ctrl> and drag to make a copy. - <Ctrl> 누르고 복사본을 만들기 위하여 끌기 + Press <%1> and drag to make a copy. + <%1> 누르고 복사본을 만들기 위하여 끌기 Current length 현재 길이 - Press <Ctrl> for free resizing. - 자유 크기 재조정하기 위하여 <Ctrl> 누르기 + Press <%1> for free resizing. + 자유 크기 재조정하기 위하여 <%1> 누르기 %1:%2 (%3:%4 to %5:%6) @@ -6031,14 +6031,14 @@ Please make sure you have read-permission to the file and the directory containi 붙여넣기 - Mute/unmute (<Ctrl> + middle click) - 무음/무음해제 (<Ctrl> + 중간 클릭) + Mute/unmute (<%1> + middle click) + 무음/무음해제 (<%1> + 중간 클릭) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. diff --git a/data/locale/nl.ts b/data/locale/nl.ts index feb2cbb5e..6f4a3960c 100644 --- a/data/locale/nl.ts +++ b/data/locale/nl.ts @@ -421,15 +421,15 @@ If you're interested in translating LMMS in another language or want to imp - Cut selected values (Ctrl+X) - Knip geselecteerde waarden (Ctrl+X) + Cut selected values (%1+X) + Knip geselecteerde waarden (%1+X) - Copy selected values (Ctrl+C) - Kopieer geselecteerde waarden (Ctrl+C) + Copy selected values (%1+C) + Kopieer geselecteerde waarden (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -460,7 +460,7 @@ If you're interested in translating LMMS in another language or want to imp AutomationPattern - Drag a control while pressing <Ctrl> + Drag a control while pressing <%1> @@ -4863,7 +4863,7 @@ volume van de steps is met het muiswiel te veranderen - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. @@ -4871,7 +4871,7 @@ volume van de steps is met het muiswiel te veranderen - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. @@ -4879,16 +4879,16 @@ volume van de steps is met het muiswiel te veranderen - Cut selected notes (Ctrl+X) - Knip geselecteerde noten (Ctrl+X) + Cut selected notes (%1+X) + Knip geselecteerde noten (%1+X) - Copy selected notes (Ctrl+C) - Kopieer geselecteerde noten (Ctrl+C) + Copy selected notes (%1+C) + Kopieer geselecteerde noten (%1+C) - Paste notes from clipboard (Ctrl+V) - Plak noten van klembord (Ctrl+V) + Paste notes from clipboard (%1+V) + Plak noten van klembord (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -4988,40 +4988,40 @@ Reason: "%2" &Ongedaan maken - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo &Herstellen - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy &Kopieren - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t K&nippen - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste &Plakken - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5032,56 +5032,56 @@ Reason: "%2" &Vet - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic &Cursief - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline &Onderstrepen - Ctrl+U - Ctrl+U + %1+U + %1+U &Left &Links - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter C&entreren - Ctrl+E - Ctrl+E + %1+E + %1+E &Right &Rechts - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify &Uitgevuld - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5315,8 +5315,8 @@ Reason: "%2" Plakken - Mute/unmute (<Ctrl> + middle click) - Dempen/geluid aan (<Ctrl> + middelklik) + Mute/unmute (<%1> + middle click) + Dempen/geluid aan (<%1> + middelklik) Set/clear record @@ -5918,11 +5918,11 @@ Vertraging: %2 ms Tip - Press <Ctrl> to disable magnetic loop points. + Press <%1> to disable magnetic loop points. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. @@ -5998,7 +5998,7 @@ Zorg ervoor dat je schrijf-bevoegdheid hebt voor deze bestanden en mapen en prob Tip - Press <Ctrl> and drag to make a copy. + Press <%1> and drag to make a copy. @@ -6006,8 +6006,8 @@ Zorg ervoor dat je schrijf-bevoegdheid hebt voor deze bestanden en mapen en prob Huidige lengte - Press <Ctrl> for free resizing. - Druk <Ctrl> voor vrije grootteverandering. + Press <%1> for free resizing. + Druk <%1> voor vrije grootteverandering. %1:%2 (%3:%4 to %5:%6) @@ -6030,15 +6030,15 @@ Zorg ervoor dat je schrijf-bevoegdheid hebt voor deze bestanden en mapen en prob Plakken - Mute/unmute (<Ctrl> + middle click) - Dempen/geluid aan (<Ctrl> + middelklik) + Mute/unmute (<%1> + middle click) + Dempen/geluid aan (<%1> + middelklik) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. - Druk <Ctrl> tijdens klikken op move-grip om een nieuwe drag'n'drop-actie te starten. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. + Druk <%1> tijdens klikken op move-grip om een nieuwe drag'n'drop-actie te starten. Actions for this track diff --git a/data/locale/pl.ts b/data/locale/pl.ts index c5c2dbfe3..37bf0fca1 100644 --- a/data/locale/pl.ts +++ b/data/locale/pl.ts @@ -427,15 +427,15 @@ Zauważone błędy i propozycje zmian tłumaczenia proszę zgłaszać na e-mail: - Cut selected values (Ctrl+X) - Wytnij zaznaczone elementy (Ctrl+X) + Cut selected values (%1+X) + Wytnij zaznaczone elementy (%1+X) - Copy selected values (Ctrl+C) - Skopiuj zaznaczone elementy (Ctrl+C) + Copy selected values (%1+C) + Skopiuj zaznaczone elementy (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -466,8 +466,8 @@ Zauważone błędy i propozycje zmian tłumaczenia proszę zgłaszać na e-mail: AutomationPattern - Drag a control while pressing <Ctrl> - Przeciągnij trzymając wciśnięty klawisz <Ctrl> + Drag a control while pressing <%1> + Przeciągnij trzymając wciśnięty klawisz <%1> Model is already connected to this pattern. @@ -4884,32 +4884,32 @@ użyj kółka myszy aby ustawić głośność poszczególnych krokówTryb odstrojenia (Shift+T) - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. - Kliknij tutaj, aby przejść do trybu rysowania. W tym trybie możesz dodawać, przemieszczać i zmieniać rozmiar nut To domyślny tryb, który będziesz używać przez większość czasu. Możesz go aktywować z poziomu klawiatury za pomocą skrótu 'Shift+D'. Przytrzymaj klawisz 'Ctrl' aby czasowo przejść do trybu zaznaczenia. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. + Kliknij tutaj, aby przejść do trybu rysowania. W tym trybie możesz dodawać, przemieszczać i zmieniać rozmiar nut To domyślny tryb, który będziesz używać przez większość czasu. Możesz go aktywować z poziomu klawiatury za pomocą skrótu 'Shift+D'. Przytrzymaj klawisz '%1' aby czasowo przejść do trybu zaznaczenia. Click here and erase mode will be activated. In this mode you can erase notes. You can also press 'Shift+E' on your keyboard to activate this mode. Kliknij tutaj, aby przejść do trybu kasowania. W tym trybie możesz usuwać nuty. Możesz go aktywować z poziomu klawiatury za pomocą skrótu 'Shift+E'. - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. - Kliknij tutaj, aby przejść do trybu zaznaczania. W tym trybie możesz zaznaczać pojedyncze nuty lub całe ich grupy. Alternatywnie możesz przytrzymać klawisz 'Ctrl' w trybie rysowania aby tymczasowo przejść do trybu zaznaczania. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. + Kliknij tutaj, aby przejść do trybu zaznaczania. W tym trybie możesz zaznaczać pojedyncze nuty lub całe ich grupy. Alternatywnie możesz przytrzymać klawisz '%1' w trybie rysowania aby tymczasowo przejść do trybu zaznaczania. Click here and detune mode will be activated. In this mode you can click a note to open its automation detuning. You can utilize this to slide notes from one to another. You can also press 'Shift+T' on your keyboard to activate this mode. Kliknij tutaj, aby przejść do trybu odstrojenia. W tym trybie możesz odstrajać nuty w oknie, które otworzy się po kliknięciu na nich. Ten tryb możesz aktywować z poziomu klawiatury przez wciśnięcie kombinacji 'Shift+T'. - Cut selected notes (Ctrl+X) - Wytnij zaznaczone nuty (Ctrl+X) + Cut selected notes (%1+X) + Wytnij zaznaczone nuty (%1+X) - Copy selected notes (Ctrl+C) - Skopiuj zaznaczone nuty (Ctrl+C) + Copy selected notes (%1+C) + Skopiuj zaznaczone nuty (%1+C) - Paste notes from clipboard (Ctrl+V) - Wklej nuty ze schowka (Ctrl+V) + Paste notes from clipboard (%1+V) + Wklej nuty ze schowka (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -5010,40 +5010,40 @@ Powód: "%2" Cofnij [&U] - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo Powtórz [&R] - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy &Kopiuj - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t Wy&tnij - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste &Wklej - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5054,56 +5054,56 @@ Powód: "%2" Wytłuść [&B] - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic Kursywa [&I] - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline Podkreślenie [&U] - Ctrl+U - Ctrl+U + %1+U + %1+U &Left Lewo [&L] - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter Centrowanie [&E] - Ctrl+E - Ctrl+E + %1+E + %1+E &Right Prawo [&R] - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify Justowanie [&J] - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5337,8 +5337,8 @@ Powód: "%2" Wklej - Mute/unmute (<Ctrl> + middle click) - Wycisz/anuluj wyciszenie (<Ctrl> + kliknięcie rolką myszy) + Mute/unmute (<%1> + middle click) + Wycisz/anuluj wyciszenie (<%1> + kliknięcie rolką myszy) Set/clear record @@ -5941,11 +5941,11 @@ Upewnij się, że masz przynajmniej uprawnienia odczytu tego pliku a następnie Wskazówka - Press <Ctrl> to disable magnetic loop points. + Press <%1> to disable magnetic loop points. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. @@ -6021,16 +6021,16 @@ Upewnij się, że masz uprawnienia do odczytu tego pliku i katalogu zawierające Wskazówka - Press <Ctrl> and drag to make a copy. - Naciśnij <Ctrl> i przeciągnij aby stworzyć kopię. + Press <%1> and drag to make a copy. + Naciśnij <%1> i przeciągnij aby stworzyć kopię. Current length Aktualna długość - Press <Ctrl> for free resizing. - Naciśnij <Ctrl> aby zmienić rozmiar. + Press <%1> for free resizing. + Naciśnij <%1> aby zmienić rozmiar. %1:%2 (%3:%4 to %5:%6) @@ -6053,15 +6053,15 @@ Upewnij się, że masz uprawnienia do odczytu tego pliku i katalogu zawierające Wklej - Mute/unmute (<Ctrl> + middle click) - Wycisz/anuluj wyciszenie (<Ctrl> + kliknięcie rolką myszy) + Mute/unmute (<%1> + middle click) + Wycisz/anuluj wyciszenie (<%1> + kliknięcie rolką myszy) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. - Naciśnij <Ctrl> podczas przeciągania elementu kursorem aby rozpocząć nową akcję 'przeciągnij i upuść'. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. + Naciśnij <%1> podczas przeciągania elementu kursorem aby rozpocząć nową akcję 'przeciągnij i upuść'. Actions for this track diff --git a/data/locale/pt.ts b/data/locale/pt.ts index 1cab55583..aa80670b8 100644 --- a/data/locale/pt.ts +++ b/data/locale/pt.ts @@ -425,15 +425,15 @@ Esteban Viveros Clique aqui para selecionar progressão cúbica hermite-progressions para este sequenciador de automação. O valor do objeto conectado irá mudar em curva e suavemente entre picos e vales. - Cut selected values (Ctrl+X) - Cortar (Ctrl+X) + Cut selected values (%1+X) + Cortar (%1+X) - Copy selected values (Ctrl+C) - Copiar (Ctrl+C) + Copy selected values (%1+C) + Copiar (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -464,8 +464,8 @@ Esteban Viveros AutomationPattern - Drag a control while pressing <Ctrl> - Arraste o controle enquanto pressiona a tecla <Ctrl> + Drag a control while pressing <%1> + Arraste o controle enquanto pressiona a tecla <%1> Model is already connected to this pattern. @@ -4882,7 +4882,7 @@ use a roda do mouse para midificar o volume de cada passo Automação para Afinação (Shift+T) - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. Clique aqui e o lápis será ativado. O lápis serve para adicionar ou mover valores simples. Ele estará ativado previamente e será utilizado a maior parte do tempo. Você pode usar 'Shift+D' no teclado para ativar o lápis. @@ -4890,7 +4890,7 @@ use a roda do mouse para midificar o volume de cada passo Clique aqui e a borracha será ativada. A borracha serve para apagar valores simples. Você pode usar 'Shif+E' no teclado para utilizar a borracha. - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. Clique aqui e modo de seleção será ativado. A borracha serve para apagar valores simples. Você pode usar 'Shif+E' no teclado para utilizar a borracha.A borracha serve para apagar valores simples. Você pode usar 'Shif+E' no teclado para utilizar a borracha. Este modo torna possível a seleção de notas. Alternativamente você pode pressionar Crtl enquanto estiver usando o lápis para utilizar o modo de seleção temporariamente. @@ -4898,16 +4898,16 @@ use a roda do mouse para midificar o volume de cada passo Clique aqui e a automação para afinação será ativada. Nela você pode clicar na nota para abrir sua automação de afinação. Você pode utilizar esta ferramenta para fazer glissandos de uma altura para outra. - Cut selected notes (Ctrl+X) - Recortar notas selecionadas (Ctrl+X) + Cut selected notes (%1+X) + Recortar notas selecionadas (%1+X) - Copy selected notes (Ctrl+C) - Copiar notas selecionadas (Ctrl+C) + Copy selected notes (%1+C) + Copiar notas selecionadas (%1+C) - Paste notes from clipboard (Ctrl+V) - Colar notas da área de transferência (Ctrl+V) + Paste notes from clipboard (%1+V) + Colar notas da área de transferência (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -5008,40 +5008,40 @@ Motivo: "%2" Des&fazer - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo &Refazer - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy &Copiar - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t Recor&tar - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste C&olar - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5052,56 +5052,56 @@ Motivo: "%2" &Negrito - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic &Itálico - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline S&ublinhado - Ctrl+U - Ctrl+U + %1+U + %1+U &Left &Esquerda - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter C&entro - Ctrl+E - Ctrl+E + %1+E + %1+E &Right Di&reita - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify &Justificar - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5339,8 +5339,8 @@ Motivo: "%2" Duplo clique para selecionar amostra - Mute/unmute (<Ctrl> + middle click) - Mudo/Não Mudo (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) + Mudo/Não Mudo (<%1> + middle click) @@ -5939,12 +5939,12 @@ Latência: %2 ms Sugestão - Press <Ctrl> to disable magnetic loop points. - Pressione <Ctrl> para desabilitar os pontos de loop magnéticos. + Press <%1> to disable magnetic loop points. + Pressione <%1> para desabilitar os pontos de loop magnéticos. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. - Pressione <Shift> para mover o começo do ponto de loop; Pressione <Ctrl> para desabilitar os pontos de loop magnéticos. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. + Pressione <Shift> para mover o começo do ponto de loop; Pressione <%1> para desabilitar os pontos de loop magnéticos. @@ -6019,16 +6019,16 @@ Por favor certifique-se que você tem permissões de leitura para o arquivo e pa Sugestão - Press <Ctrl> and drag to make a copy. - Pressione <Ctrl> e arraste para fazer uma cópia. + Press <%1> and drag to make a copy. + Pressione <%1> e arraste para fazer uma cópia. Current length Tamanho atual - Press <Ctrl> for free resizing. - Pressione <Ctrl> para redimensionar livremente. + Press <%1> for free resizing. + Pressione <%1> para redimensionar livremente. %1:%2 (%3:%4 to %5:%6) @@ -6051,15 +6051,15 @@ Por favor certifique-se que você tem permissões de leitura para o arquivo e pa Colar - Mute/unmute (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. - Pressione <Ctrl> enquanto clica em mover-grip para o começo, uma ação de arrastar. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. + Pressione <%1> enquanto clica em mover-grip para o começo, uma ação de arrastar. Actions for this track diff --git a/data/locale/ru.ts b/data/locale/ru.ts index 2ec32ca37..99ec01efd 100644 --- a/data/locale/ru.ts +++ b/data/locale/ru.ts @@ -432,16 +432,16 @@ Oe Ai <oeai/at/symbiants/dot/com> Кубическая Эрмитова прогрессия для этого шаблона автоматизации. Кол-во подсоединенных объектов изменится по сглаженной кривой и смягчится на пиках и спадах. - Cut selected values (Ctrl+X) - Вырезать выбранные ноты (Ctrl+X) + Cut selected values (%1+X) + Вырезать выбранные ноты (%1+X) - Copy selected values (Ctrl+C) - Копировать выбранные ноты в буфер (Ctrl+C) + Copy selected values (%1+C) + Копировать выбранные ноты в буфер (%1+C) - Paste values from clipboard Ctrl+V) - Вставить запомненные значения (Ctrl+V) + Paste values from clipboard (%1+V) + Вставить запомненные значения (%1+V) Click here and selected values will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -471,8 +471,8 @@ Oe Ai <oeai/at/symbiants/dot/com> AutomationPattern - Drag a control while pressing <Ctrl> - Тяните контроль удерживая <Ctrl> + Drag a control while pressing <%1> + Тяните контроль удерживая <%1> Model is already connected to this pattern. @@ -4933,33 +4933,33 @@ use mouse wheel to set volume of a step Режим подстраивания (Shift+T) - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. Режим рисования нот, в нём вы можете добавлять/перемещать и изменять длительность одиночных нот. Это режим по умолчанию и используется большую часть времени. -Для включения этого режима можно использовать комбинацию клавиш Shift+D, удерживайте Ctrl для временного переключения в режим выбора. +Для включения этого режима можно использовать комбинацию клавиш Shift+D, удерживайте %1 для временного переключения в режим выбора. Click here and erase mode will be activated. In this mode you can erase notes. You can also press 'Shift+E' on your keyboard to activate this mode. Режим стирания. В этом режиме вы можете стирать ноты. Для включения этого режима можно использовать комбинацию клавиш Shift+E. - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. - Режим выделения. В этом режиме можно выделять ноты, можно также удерживать Ctrl в режиме рисования, чтобы можно было на время войти в режим выделения. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. + Режим выделения. В этом режиме можно выделять ноты, можно также удерживать %1 в режиме рисования, чтобы можно было на время войти в режим выделения. Click here and detune mode will be activated. In this mode you can click a note to open its automation detuning. You can utilize this to slide notes from one to another. You can also press 'Shift+T' on your keyboard to activate this mode. Режим подстройки. В этом режиме можно выбирать ноты для автоматизации их подстраивания. Можно использовать это для переходов нот от одной к другой. Для активации с клавиатуры <Shift+T>. - Cut selected notes (Ctrl+X) - Переместить выделенные ноты в буфер (Ctrl+X) + Cut selected notes (%1+X) + Переместить выделенные ноты в буфер (%1+X) - Copy selected notes (Ctrl+C) - Копировать выделенные ноты в буфер (Ctrl+X) + Copy selected notes (%1+C) + Копировать выделенные ноты в буфер (%1+X) - Paste notes from clipboard (Ctrl+V) - Вставить ноты из буфера (Ctrl+V) + Paste notes from clipboard (%1+V) + Вставить ноты из буфера (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -5060,40 +5060,40 @@ Reason: "%2" &U Отменить - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo &R Повторить - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy &C Копировать - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t &t Вырезать - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste &P Вставить - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5104,39 +5104,39 @@ Reason: "%2" &b Полужирный - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic &i Курсив - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline &U Подчеркнутый - Ctrl+U - Ctrl+U + %1+U + %1+U &Left &L По левому краю - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter По &центру - Ctrl+E + %1+E @@ -5144,7 +5144,7 @@ Reason: "%2" По &правому краю - Ctrl+R + %1+R @@ -5152,7 +5152,7 @@ Reason: "%2" По &ширине - Ctrl+J + %1+J @@ -5388,8 +5388,8 @@ Reason: "%2" Вставить - Mute/unmute (<Ctrl> + middle click) - Заглушить/включить (<Ctrl> + средняя кнопка мыши) + Mute/unmute (<%1> + middle click) + Заглушить/включить (<%1> + средняя кнопка мыши) Set/clear record @@ -5992,12 +5992,12 @@ Latency: %2 ms Подсказка - Press <Ctrl> to disable magnetic loop points. - Нажмите <Ctrl>, чтобы убрать прилипание точек петли. + Press <%1> to disable magnetic loop points. + Нажмите <%1>, чтобы убрать прилипание точек петли. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. - Зажмите <Shift> чтобы сдвинуть начало точек петли; Нажмите <Ctrl>, чтобы убрать прилипание точек петли. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. + Зажмите <Shift> чтобы сдвинуть начало точек петли; Нажмите <%1>, чтобы убрать прилипание точек петли. @@ -6072,16 +6072,16 @@ Please make sure you have read-permission to the file and the directory containi Подсказка - Press <Ctrl> and drag to make a copy. - Нажмите <Ctrl> и тащите мышью, чтобы создать копию. + Press <%1> and drag to make a copy. + Нажмите <%1> и тащите мышью, чтобы создать копию. Current length Текущая длительность - Press <Ctrl> for free resizing. - Для свободного изменения размера нажмите <Ctrl>. + Press <%1> for free resizing. + Для свободного изменения размера нажмите <%1>. %1:%2 (%3:%4 to %5:%6) @@ -6104,14 +6104,14 @@ Please make sure you have read-permission to the file and the directory containi Вставить - Mute/unmute (<Ctrl> + middle click) - Тихо/громко (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) + Тихо/громко (<%1> + middle click) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. Зажмите <Сtrl> и нажимайте мышь во время движения, чтобы начать новую переброску. diff --git a/data/locale/sv.ts b/data/locale/sv.ts index 5f81fde69..76ce9ca44 100644 --- a/data/locale/sv.ts +++ b/data/locale/sv.ts @@ -421,16 +421,16 @@ If you're interested in translating LMMS in another language or want to imp Klicka här för att aktivera cubic hermite talföljd. Värdet följer en mjuk kurva mellan kontrollpunkter. - Cut selected values (Ctrl+X) - Klipp ut valda värden (Ctrl+X) + Cut selected values (%1+X) + Klipp ut valda värden (%1+X) - Copy selected values (Ctrl+C) - Kopiera valda värden (ctrl+C) + Copy selected values (%1+C) + Kopiera valda värden (%1+C) - Paste values from clipboard Ctrl+V) - Klistra värden (Ctrl+V) + Paste values from clipboard (%1+V) + Klistra värden (%1+V) Click here and selected values will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -460,8 +460,8 @@ If you're interested in translating LMMS in another language or want to imp AutomationPattern - Drag a control while pressing <Ctrl> - Dra en kontroll samtidigt som du håller <Ctrl> + Drag a control while pressing <%1> + Dra en kontroll samtidigt som du håller <%1> Model is already connected to this pattern. @@ -4862,7 +4862,7 @@ use mouse wheel to set volume of a step - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. @@ -4870,7 +4870,7 @@ use mouse wheel to set volume of a step - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. @@ -4878,15 +4878,15 @@ use mouse wheel to set volume of a step - Cut selected notes (Ctrl+X) - Klipp ut valda noter(Ctrl+X) + Cut selected notes (%1+X) + Klipp ut valda noter(%1+X) - Copy selected notes (Ctrl+C) + Copy selected notes (%1+C) - Paste notes from clipboard (Ctrl+V) + Paste notes from clipboard (%1+V) @@ -4987,40 +4987,40 @@ Reason: "%2" &Ångra - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo &Återställ - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy &Kopiera - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t Klipp& ut - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste &Klistra in - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5031,56 +5031,56 @@ Reason: "%2" &Fet - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic &Kursiv - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline &Understruken - Ctrl+U - Ctrl+U + %1+U + %1+U &Left &Vänster - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter C&entrera - Ctrl+E - Ctrl+E + %1+E + %1+E &Right &Höger - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5315,7 +5315,7 @@ Reason: "%2" Klistra in - Mute/unmute (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) @@ -5917,11 +5917,11 @@ Latency: %2 ms Ledtråd - Press <Ctrl> to disable magnetic loop points. + Press <%1> to disable magnetic loop points. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. @@ -5997,7 +5997,7 @@ Se till att du har läsningsrättigheter för filen och katalogen som innehålle Ledtråd - Press <Ctrl> and drag to make a copy. + Press <%1> and drag to make a copy. @@ -6005,7 +6005,7 @@ Se till att du har läsningsrättigheter för filen och katalogen som innehålle Aktuell längd - Press <Ctrl> for free resizing. + Press <%1> for free resizing. @@ -6029,14 +6029,14 @@ Se till att du har läsningsrättigheter för filen och katalogen som innehålle Klistra in - Mute/unmute (<Ctrl> + middle click) + Mute/unmute (<%1> + middle click) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. diff --git a/data/locale/uk.ts b/data/locale/uk.ts index 462d1ce89..4d25ed524 100644 --- a/data/locale/uk.ts +++ b/data/locale/uk.ts @@ -436,16 +436,16 @@ If you're interested in translating LMMS in another language or want to imp Кубічна Ермітова прогресія для цього шаблону автоматизації. Кількість приєднаних об'єктів зміниться по згладженій кривій і пом'якшиться на піках і спадах. - Cut selected values (Ctrl+X) - Вирізати вибрані ноти (Ctrl+X) + Cut selected values (%1+X) + Вирізати вибрані ноти (%1+X) - Copy selected values (Ctrl+C) - Копіювати вибрані ноти до буферу (Ctrl+C) + Copy selected values (%1+C) + Копіювати вибрані ноти до буферу (%1+C) - Paste values from clipboard (Ctrl+V) - Вставити значення з буферу (Ctrl+V) + Paste values from clipboard (%1+V) + Вставити значення з буферу (%1+V) Click here and selected values will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -499,8 +499,8 @@ If you're interested in translating LMMS in another language or want to imp AutomationPattern - Drag a control while pressing <Ctrl> - Тягніть контроль утримуючи <Ctrl> + Drag a control while pressing <%1> + Тягніть контроль утримуючи <%1> @@ -5430,33 +5430,33 @@ PM (ФМ) режим означає Фазова Модуляція: Осцил Режим підлаштовування (Shift+T) - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. Режим малювання нот, в ньому ви можете додавати/переміщати і змінювати тривалість одиночних нот. Це режим за замовчуванням і використовується більшу частину часу. -Для включення цього режиму можна скористатися комбінацією клавіш Shift+D, утримуйте Ctrl для тимчасового перемикання в режим вибору. +Для включення цього режиму можна скористатися комбінацією клавіш Shift+D, утримуйте %1 для тимчасового перемикання в режим вибору. Click here and erase mode will be activated. In this mode you can erase notes. You can also press 'Shift+E' on your keyboard to activate this mode. Режим стирання. У цьому режимі ви можете стирати ноти. Для увімкнення цього режиму можна скористатися комбінацією клавіш Shift+E. - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. - Режим виділення. У цьому режимі можна виділяти ноти, також можна утримувати Ctrl в режимі малювання, щоб на час увійти в режим виділення. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. + Режим виділення. У цьому режимі можна виділяти ноти, також можна утримувати %1 в режимі малювання, щоб на час увійти в режим виділення. Click here and detune mode will be activated. In this mode you can click a note to open its automation detuning. You can utilize this to slide notes from one to another. You can also press 'Shift+T' on your keyboard to activate this mode. Режим підстроювання. У цьому режимі можна вибирати ноти для автоматизації їх підлаштування. Можна використовувати це для переходів нот від однієї до іншої. Для активації з клавіатури <Shift+T>. - Cut selected notes (Ctrl+X) - Перемістити виділені ноти до буферу (Ctrl+X) + Cut selected notes (%1+X) + Перемістити виділені ноти до буферу (%1+X) - Copy selected notes (Ctrl+C) - Копіювати виділені ноти до буферу (Ctrl+X) + Copy selected notes (%1+C) + Копіювати виділені ноти до буферу (%1+X) - Paste notes from clipboard (Ctrl+V) - Вставити ноти з буферу (Ctrl+V) + Paste notes from clipboard (%1+V) + Вставити ноти з буферу (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -5588,7 +5588,7 @@ Reason: "%2" &U Скасувати - Ctrl+Z + %1+Z @@ -5596,7 +5596,7 @@ Reason: "%2" &R Повторити - Ctrl+Y + %1+Y @@ -5604,7 +5604,7 @@ Reason: "%2" &C Копіювати - Ctrl+C + %1+C @@ -5612,7 +5612,7 @@ Reason: "%2" &t Вирізати - Ctrl+X + %1+X @@ -5620,7 +5620,7 @@ Reason: "%2" &P Вставити - Ctrl+V + %1+V @@ -5632,7 +5632,7 @@ Reason: "%2" Напів&жирний - Ctrl+B + %1+B @@ -5640,7 +5640,7 @@ Reason: "%2" &Курсив - Ctrl+I + %1+I @@ -5648,7 +5648,7 @@ Reason: "%2" &Підкреслити - Ctrl+U + %1+U @@ -5656,7 +5656,7 @@ Reason: "%2" По &лівому краю - Ctrl+L + %1+L @@ -5664,7 +5664,7 @@ Reason: "%2" По &центрі - Ctrl+E + %1+E @@ -5672,7 +5672,7 @@ Reason: "%2" По &правому краю - Ctrl+R + %1+R @@ -5680,7 +5680,7 @@ Reason: "%2" По &ширині - Ctrl+J + %1+J @@ -5831,8 +5831,8 @@ Reason: "%2" Виберіть запис подвійним натисненням миші - Mute/unmute (<Ctrl> + middle click) - Заглушити/включити (<Ctrl> + середня кнопка миші) + Mute/unmute (<%1> + middle click) + Заглушити/включити (<%1> + середня кнопка миші) @@ -6483,12 +6483,12 @@ Latency: %2 ms Підказка - Press <Ctrl> to disable magnetic loop points. - Натисніть <Ctrl>, щоб прибрати прилипання точок циклу. + Press <%1> to disable magnetic loop points. + Натисніть <%1>, щоб прибрати прилипання точок циклу. - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. - Зажміть <Shift> щоб змістити початок точок циклу; Натисніть <Ctrl>, щоб прибрати прилипання точок циклу. + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. + Зажміть <Shift> щоб змістити початок точок циклу; Натисніть <%1>, щоб прибрати прилипання точок циклу. @@ -6563,16 +6563,16 @@ Please make sure you have read-permission to the file and the directory containi Підказка - Press <Ctrl> and drag to make a copy. - Натисніть <Ctrl> і перетягніть, щоб створити копію. + Press <%1> and drag to make a copy. + Натисніть <%1> і перетягніть, щоб створити копію. Current length Тривалість - Press <Ctrl> for free resizing. - Для вільної зміни розміру натисніть <Ctrl>. + Press <%1> for free resizing. + Для вільної зміни розміру натисніть <%1>. %1:%2 (%3:%4 to %5:%6) @@ -6595,14 +6595,14 @@ Please make sure you have read-permission to the file and the directory containi Вставити - Mute/unmute (<Ctrl> + middle click) - Заглушити/включити (<Ctrl> + середня кнопка миші) + Mute/unmute (<%1> + middle click) + Заглушити/включити (<%1> + середня кнопка миші) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. Затисніть <Сtrl> і натискайте мишку під час руху, щоб почати нову перезбірку. diff --git a/data/locale/zh.ts b/data/locale/zh.ts index b6704b23a..38799c2d6 100644 --- a/data/locale/zh.ts +++ b/data/locale/zh.ts @@ -429,15 +429,15 @@ Jeff Bai，邮箱：jeffbaichina@gmail.com - Cut selected values (Ctrl+X) - 剪切选定值 (Ctrl+X) + Cut selected values (%1+X) + 剪切选定值 (%1+X) - Copy selected values (Ctrl+C) - 复制选定值 (Ctrl+C) + Copy selected values (%1+C) + 复制选定值 (%1+C) - Paste values from clipboard Ctrl+V) + Paste values from clipboard (%1+V) @@ -468,8 +468,8 @@ Jeff Bai，邮箱：jeffbaichina@gmail.com AutomationPattern - Drag a control while pressing <Ctrl> - 按住<Ctrl>拖动控制器 + Drag a control while pressing <%1> + 按住<%1>拖动控制器 Model is already connected to this pattern. @@ -4874,7 +4874,7 @@ use mouse wheel to set volume of a step - Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold Ctrl to temporarily go into select mode. + Click here and draw mode will be activated. In this mode you can add, resize and move notes. This is the default mode which is used most of the time. You can also press 'Shift+D' on your keyboard to activate this mode. In this mode, hold %1 to temporarily go into select mode. @@ -4882,7 +4882,7 @@ use mouse wheel to set volume of a step - Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold Ctrl in draw mode to temporarily use select mode. + Click here and select mode will be activated. In this mode you can select notes. Alternatively, you can hold %1 in draw mode to temporarily use select mode. @@ -4890,16 +4890,16 @@ use mouse wheel to set volume of a step - Cut selected notes (Ctrl+X) - 剪切选定音符 (Ctrl+X) + Cut selected notes (%1+X) + 剪切选定音符 (%1+X) - Copy selected notes (Ctrl+C) - 复制选定音符 (Ctrl+C) + Copy selected notes (%1+C) + 复制选定音符 (%1+C) - Paste notes from clipboard (Ctrl+V) - 从剪贴板粘贴音符 (Ctrl+V) + Paste notes from clipboard (%1+V) + 从剪贴板粘贴音符 (%1+V) Click here and the selected notes will be cut into the clipboard. You can paste them anywhere in any pattern by clicking on the paste button. @@ -5000,40 +5000,40 @@ Reason: "%2" 撤销（&U) - Ctrl+Z - Ctrl+Z + %1+Z + %1+Z &Redo 重做（&R） - Ctrl+Y - Ctrl+Y + %1+Y + %1+Y &Copy 复制（&C） - Ctrl+C - Ctrl+C + %1+C + %1+C Cu&t 剪切（&T） - Ctrl+X - Ctrl+X + %1+X + %1+X &Paste 粘贴（&P） - Ctrl+V - Ctrl+V + %1+V + %1+V Format Actions @@ -5044,56 +5044,56 @@ Reason: "%2" 加粗（&B） - Ctrl+B - Ctrl+B + %1+B + %1+B &Italic 斜体（&I） - Ctrl+I - Ctrl+I + %1+I + %1+I &Underline 下划线（&U） - Ctrl+U - Ctrl+U + %1+U + %1+U &Left 左对齐（&L） - Ctrl+L - Ctrl+L + %1+L + %1+L C&enter 居中（&E） - Ctrl+E - Ctrl+E + %1+E + %1+E &Right 右对齐（&R） - Ctrl+R - Ctrl+R + %1+R + %1+R &Justify 匀齐（&J） - Ctrl+J - Ctrl+J + %1+J + %1+J &Color... @@ -5327,8 +5327,8 @@ Reason: "%2" 粘贴 - Mute/unmute (<Ctrl> + middle click) - 静音/取消静音 (<Ctrl> + 鼠标中键) + Mute/unmute (<%1> + middle click) + 静音/取消静音 (<%1> + 鼠标中键) Set/clear record @@ -5931,12 +5931,12 @@ Latency: %2 ms 提示 - Press <Ctrl> to disable magnetic loop points. - 按住 <Ctrl> 禁用磁性吸附。 + Press <%1> to disable magnetic loop points. + 按住 <%1> 禁用磁性吸附。 - Hold <Shift> to move the begin loop point; Press <Ctrl> to disable magnetic loop points. - 按住 <Shift> 移动起始循环点；按住 <Ctrl> 禁用磁性吸附。 + Hold <Shift> to move the begin loop point; Press <%1> to disable magnetic loop points. + 按住 <Shift> 移动起始循环点；按住 <%1> 禁用磁性吸附。 @@ -6009,16 +6009,16 @@ Please make sure you have read-permission to the file and the directory containi 提示 - Press <Ctrl> and drag to make a copy. - 按住 <Ctrl> 并拖动以创建副本。 + Press <%1> and drag to make a copy. + 按住 <%1> 并拖动以创建副本。 Current length 当前长度 - Press <Ctrl> for free resizing. - 按住 <Ctrl> 自由调整大小。 + Press <%1> for free resizing. + 按住 <%1> 自由调整大小。 %1:%2 (%3:%4 to %5:%6) @@ -6041,15 +6041,15 @@ Please make sure you have read-permission to the file and the directory containi 粘贴 - Mute/unmute (<Ctrl> + middle click) - 静音/取消静音 (<Ctrl> + 鼠标中键) + Mute/unmute (<%1> + middle click) + 静音/取消静音 (<%1> + 鼠标中键) TrackOperationsWidget - Press <Ctrl> while clicking on move-grip to begin a new drag'n'drop-action. - 按住 <Ctrl> 的同时拖动移动柄复制并移动此轨道。 + Press <%1> while clicking on move-grip to begin a new drag'n'drop-action. + 按住 <%1> 的同时拖动移动柄复制并移动此轨道。 Actions for this track diff --git a/src/core/AutomationPattern.cpp b/src/core/AutomationPattern.cpp index 93934c2a2..9750a8613 100644 --- a/src/core/AutomationPattern.cpp +++ b/src/core/AutomationPattern.cpp @@ -595,7 +595,12 @@ const QString AutomationPattern::name() const { return m_objects.first()->fullDisplayName(); } - return tr( "Drag a control while pressing " ); + return tr( "Drag a control while pressing <%1>" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘"); + #else + "Ctrl"); + #endif } diff --git a/src/core/Track.cpp b/src/core/Track.cpp index 2a241b2e4..05d3750a5 100644 --- a/src/core/Track.cpp +++ b/src/core/Track.cpp @@ -651,8 +651,13 @@ void TrackContentObjectView::mousePressEvent( QMouseEvent * me ) s_textFloat->setTitle( tr( "Current position" ) ); delete m_hint; m_hint = TextFloat::displayMessage( tr( "Hint" ), - tr( "Press and drag to make " - "a copy." ), + tr( "Press <%1> and drag to make " + "a copy." ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), + #else + "Ctrl"), + #endif embed::getIconPixmap( "hint" ), 0 ); } else if( !m_tco->getAutoResize() ) @@ -664,8 +669,13 @@ void TrackContentObjectView::mousePressEvent( QMouseEvent * me ) s_textFloat->setTitle( tr( "Current length" ) ); delete m_hint; m_hint = TextFloat::displayMessage( tr( "Hint" ), - tr( "Press for free " - "resizing." ), + tr( "Press <%1> for free " + "resizing." ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), + #else + "Ctrl"), + #endif embed::getIconPixmap( "hint" ), 0 ); } // s_textFloat->reparent( this ); @@ -933,7 +943,12 @@ void TrackContentObjectView::contextMenuEvent( QContextMenuEvent * cme ) tr( "Paste" ), m_tco, SLOT( paste() ) ); contextMenu.addSeparator(); contextMenu.addAction( embed::getIconPixmap( "muted" ), - tr( "Mute/unmute ( + middle click)" ), + tr( "Mute/unmute (<%1> + middle click)" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), + #else + "Ctrl"), + #endif m_tco, SLOT( toggleMute() ) ); constructContextMenu( &contextMenu ); @@ -1569,8 +1584,13 @@ TrackOperationsWidget::TrackOperationsWidget( TrackView * parent ) : "track_op_grip" ) ); } - ToolTip::add( this, tr( "Press while clicking on move-grip " - "to begin a new drag'n'drop-action." ) ); + ToolTip::add( this, tr( "Press <%1> while clicking on move-grip " + "to begin a new drag'n'drop-action." ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif QMenu * toMenu = new QMenu( this ); toMenu->setFont( pointSize<9>( toMenu->font() ) ); @@ -1755,7 +1775,7 @@ void TrackOperationsWidget::updateMenu() toMenu->addAction( embed::getIconPixmap( "cancel", 16, 16 ), tr( "Remove this track" ), this, SLOT( removeTrack() ) ); - + if( ! m_trackView->trackContainerView()->fixedTCOs() ) { toMenu->addAction( tr( "Clear this track" ), this, SLOT( clearTrack() ) ); @@ -2738,6 +2758,3 @@ void TrackView::createTCOView( TrackContentObject * tco ) } tco->selectViewOnCreate( false ); } - - - diff --git a/src/gui/TimeLineWidget.cpp b/src/gui/TimeLineWidget.cpp index 821683187..a367d2bcf 100644 --- a/src/gui/TimeLineWidget.cpp +++ b/src/gui/TimeLineWidget.cpp @@ -324,14 +324,24 @@ void TimeLineWidget::mousePressEvent( QMouseEvent* event ) { delete m_hint; m_hint = TextFloat::displayMessage( tr( "Hint" ), - tr( "Press to disable magnetic loop points." ), + tr( "Press <%1> to disable magnetic loop points." ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), + #else + "Ctrl"), + #endif embed::getIconPixmap( "hint" ), 0 ); } else if( m_action == MoveLoopEnd ) { delete m_hint; m_hint = TextFloat::displayMessage( tr( "Hint" ), - tr( "Hold to move the begin loop point; Press to disable magnetic loop points." ), + tr( "Hold to move the begin loop point; Press <%1> to disable magnetic loop points." ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), + #else + "Ctrl"), + #endif embed::getIconPixmap( "hint" ), 0 ); } @@ -401,6 +411,3 @@ void TimeLineWidget::mouseReleaseEvent( QMouseEvent* event ) if ( m_action == SelectSongTCO ) { emit selectionFinished(); } m_action = NoAction; } - - - diff --git a/src/gui/editors/AutomationEditor.cpp b/src/gui/editors/AutomationEditor.cpp index 1c24243d4..74db2ba96 100644 --- a/src/gui/editors/AutomationEditor.cpp +++ b/src/gui/editors/AutomationEditor.cpp @@ -1199,7 +1199,7 @@ void AutomationEditor::paintEvent(QPaintEvent * pe ) //Don't bother doing/rendering anything if there is no automation points if( time_map.size() > 0 ) { - timeMap::iterator it = time_map.begin(); + timeMap::iterator it = time_map.begin(); while( it+1 != time_map.end() ) { // skip this section if it occurs completely before the @@ -1464,7 +1464,7 @@ void AutomationEditor::wheelEvent(QWheelEvent * we ) y--; } y = qBound( 0, y, m_zoomingYModel.size() - 1 ); - m_zoomingYModel.setValue( y ); + m_zoomingYModel.setValue( y ); } else if( we->modifiers() & Qt::ControlModifier && we->modifiers() & Qt::AltModifier ) { @@ -2140,11 +2140,26 @@ AutomationEditorWindow::AutomationEditorWindow() : /*DropToolBar *copyPasteActionsToolBar = addDropToolBarToTop(tr("Copy paste actions"));*/ QAction* cutAction = new QAction(embed::getIconPixmap("edit_cut"), - tr("Cut selected values (Ctrl+X)"), this); + tr("Cut selected values (%1+X)").arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), this); + #else + "Ctrl"), this); + #endif QAction* copyAction = new QAction(embed::getIconPixmap("edit_copy"), - tr("Copy selected values (Ctrl+C)"), this); + tr("Copy selected values (%1+C)").arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), this); + #else + "Ctrl"), this); + #endif QAction* pasteAction = new QAction(embed::getIconPixmap("edit_paste"), - tr("Paste values from clipboard (Ctrl+V)"), this); + tr("Paste values from clipboard (%1+V)").arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), this); + #else + "Ctrl"), this); + #endif cutAction->setWhatsThis( tr( "Click here and selected values will be cut into the " diff --git a/src/gui/editors/PianoRoll.cpp b/src/gui/editors/PianoRoll.cpp index a1e25b60d..81f59946d 100644 --- a/src/gui/editors/PianoRoll.cpp +++ b/src/gui/editors/PianoRoll.cpp @@ -2434,7 +2434,7 @@ void PianoRoll::dragNotes( int x, int y, bool alt, bool shift, bool ctrl ) // If shift is pressed we resize and rearrange only the selected notes // If shift + ctrl then we also rearrange all posterior notes (sticky) // If shift is pressed but only one note is selected, apply sticky - + if (shift) { // Algorithm: @@ -3986,8 +3986,13 @@ PianoRollWindow::PianoRollWindow() : "mode you can add, resize and move notes. This " "is the default mode which is used most of the time. " "You can also press 'Shift+D' on your keyboard to " - "activate this mode. In this mode, hold Ctrl to " - "temporarily go into select mode." ) ); + "activate this mode. In this mode, hold %1 to " + "temporarily go into select mode." ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif eraseAction->setWhatsThis( tr( "Click here and erase mode will be activated. In this " "mode you can erase notes. You can also press " @@ -3995,8 +4000,13 @@ PianoRollWindow::PianoRollWindow() : selectAction->setWhatsThis( tr( "Click here and select mode will be activated. " "In this mode you can select notes. Alternatively, " - "you can hold Ctrl in draw mode to temporarily use " - "select mode." ) ); + "you can hold %1 in draw mode to temporarily use " + "select mode." ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif detuneAction->setWhatsThis( tr( "Click here and detune mode will be activated. " "In this mode you can click a note to open its " @@ -4015,13 +4025,28 @@ PianoRollWindow::PianoRollWindow() : DropToolBar *copyPasteActionsToolBar = addDropToolBarToTop(tr("Copy paste controls")); QAction* cutAction = new QAction(embed::getIconPixmap("edit_cut"), - tr("Cut selected notes (Ctrl+X)"), this); + tr("Cut selected notes (%1+X)").arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), this); + #else + "Ctrl"), this); + #endif QAction* copyAction = new QAction(embed::getIconPixmap("edit_copy"), - tr("Copy selected notes (Ctrl+C)"), this); + tr("Copy selected notes (%1+C)").arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), this); + #else + "Ctrl"), this); + #endif QAction* pasteAction = new QAction(embed::getIconPixmap("edit_paste"), - tr("Paste notes from clipboard (Ctrl+V)"), this); + tr("Paste notes from clipboard (%1+V)").arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), this); + #else + "Ctrl"), this); + #endif cutAction->setWhatsThis( tr( "Click here and the selected notes will be cut into the " diff --git a/src/gui/widgets/ProjectNotes.cpp b/src/gui/widgets/ProjectNotes.cpp index 3ee99b776..9e345ff63 100644 --- a/src/gui/widgets/ProjectNotes.cpp +++ b/src/gui/widgets/ProjectNotes.cpp @@ -116,31 +116,56 @@ void ProjectNotes::setupActions() a = new QAction( embed::getIconPixmap( "edit_undo" ), tr( "&Undo" ), this ); - a->setShortcut( tr( "Ctrl+Z" ) ); + a->setShortcut( tr( "%1+Z" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif connect( a, SIGNAL( triggered() ), m_edit, SLOT( undo() ) ); tb->addAction( a ); a = new QAction( embed::getIconPixmap( "edit_redo" ), tr( "&Redo" ), this ); - a->setShortcut( tr( "Ctrl+Y" ) ); + a->setShortcut( tr( "%1+Y" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif connect( a, SIGNAL( triggered() ), m_edit, SLOT( redo() ) ); tb->addAction( a ); a = new QAction( embed::getIconPixmap( "edit_copy" ), tr( "&Copy" ), this ); - a->setShortcut( tr( "Ctrl+C" ) ); + a->setShortcut( tr( "%1+C" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif connect( a, SIGNAL( triggered() ), m_edit, SLOT( copy() ) ); tb->addAction( a ); a = new QAction( embed::getIconPixmap( "edit_cut" ), tr( "Cu&t" ), this ); - a->setShortcut( tr( "Ctrl+X" ) ); + a->setShortcut( tr( "%1+X" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif connect( a, SIGNAL( triggered() ), m_edit, SLOT( cut() ) ); tb->addAction( a ); a = new QAction( embed::getIconPixmap( "edit_paste" ), tr( "&Paste" ), this ); - a->setShortcut( tr( "Ctrl+V" ) ); + a->setShortcut( tr( "%1+V" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif connect( a, SIGNAL( triggered() ), m_edit, SLOT( paste() ) ); tb->addAction( a ); @@ -170,14 +195,24 @@ void ProjectNotes::setupActions() m_actionTextBold = new QAction( embed::getIconPixmap( "text_bold" ), tr( "&Bold" ), this ); - m_actionTextBold->setShortcut( tr( "Ctrl+B" ) ); + m_actionTextBold->setShortcut( tr( "%1+B" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif m_actionTextBold->setCheckable( true ); connect( m_actionTextBold, SIGNAL( triggered() ), this, SLOT( textBold() ) ); m_actionTextItalic = new QAction( embed::getIconPixmap( "text_italic" ), tr( "&Italic" ), this ); - m_actionTextItalic->setShortcut( tr( "Ctrl+I" ) ); + m_actionTextItalic->setShortcut( tr( "%1+I" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif m_actionTextItalic->setCheckable( true ); connect( m_actionTextItalic, SIGNAL( triggered() ), this, SLOT( textItalic() ) ); @@ -185,7 +220,12 @@ void ProjectNotes::setupActions() m_actionTextUnderline = new QAction( embed::getIconPixmap( "text_under" ), tr( "&Underline" ), this ); - m_actionTextUnderline->setShortcut( tr( "Ctrl+U" ) ); + m_actionTextUnderline->setShortcut( tr( "%1+U" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif m_actionTextUnderline->setCheckable( true ); connect( m_actionTextUnderline, SIGNAL( triggered() ), this, SLOT( textUnderline() ) ); @@ -197,7 +237,12 @@ void ProjectNotes::setupActions() m_actionAlignLeft = new QAction( embed::getIconPixmap( "text_left" ), tr( "&Left" ), m_edit ); - m_actionAlignLeft->setShortcut( tr( "Ctrl+L" ) ); + m_actionAlignLeft->setShortcut( tr( "%1+L" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif m_actionAlignLeft->setCheckable( true ); grp->addAction( m_actionAlignLeft ); @@ -205,21 +250,36 @@ void ProjectNotes::setupActions() "text_center" ), tr( "C&enter" ), m_edit ); m_actionAlignCenter->setShortcutContext( Qt::WidgetShortcut ); - m_actionAlignCenter->setShortcut( tr( "Ctrl+E" ) ); + m_actionAlignCenter->setShortcut( tr( "%1+E" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif m_actionAlignCenter->setCheckable( true ); grp->addAction( m_actionAlignCenter ); m_actionAlignRight = new QAction( embed::getIconPixmap( "text_right" ), tr( "&Right" ), m_edit ); m_actionAlignRight->setShortcutContext( Qt::WidgetShortcut ); - m_actionAlignRight->setShortcut( tr( "Ctrl+R" ) ); + m_actionAlignRight->setShortcut( tr( "%1+R" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif m_actionAlignRight->setCheckable( true ); grp->addAction( m_actionAlignRight ); m_actionAlignJustify = new QAction( embed::getIconPixmap( "text_block" ), tr( "&Justify" ), m_edit ); - m_actionAlignJustify->setShortcut( tr( "Ctrl+J" ) ); + m_actionAlignJustify->setShortcut( tr( "%1+J" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘") ); + #else + "Ctrl") ); + #endif m_actionAlignJustify->setCheckable( true ); grp->addAction( m_actionAlignJustify ); @@ -409,5 +469,3 @@ void ProjectNotes::closeEvent( QCloseEvent * _ce ) } _ce->ignore(); } - - diff --git a/src/tracks/SampleTrack.cpp b/src/tracks/SampleTrack.cpp index 7cec568ad..2f64fd7ef 100644 --- a/src/tracks/SampleTrack.cpp +++ b/src/tracks/SampleTrack.cpp @@ -266,7 +266,12 @@ void SampleTCOView::contextMenuEvent( QContextMenuEvent * _cme ) tr( "Paste" ), m_tco, SLOT( paste() ) ); contextMenu.addSeparator(); contextMenu.addAction( embed::getIconPixmap( "muted" ), - tr( "Mute/unmute ( + middle click)" ), + tr( "Mute/unmute (<%1> + middle click)" ).arg( + #ifdef LMMS_BUILD_APPLE + "⌘"), + #else + "Ctrl"), + #endif m_tco, SLOT( toggleMute() ) ); contextMenu.addAction( embed::getIconPixmap( "record" ), tr( "Set/clear record" ),