* Renamed lmms_basics.h to LmmsTypes.h and scoped it down for that purpose.
* Shifted the LMMS_STRINGIFY macro to it's own header.
* Removed the debug.h header file and use cmake to handle the macro logic.
* Remove some unused headers and include directives
* use c++20 concepts and numbers for lmms_constants.h
* replace lmms::numbers::sqrt2 with std::numbers::sqrt2
* replace lmms::numbers::e with std::numbers::e
Also replace the only use of lmms::numbers::inv_e with a local constexpr instead
* remove lmms::numbers::pi_half and lmms::numbers::pi_sqr
They were only used in one or two places each
* replace lmms::numbers::pi with std::numbers::pi
* add #include <numbers> to every file touched so far
This is probably not needed for some of these files. I'll remove those later
* Remove lmms::numbers
Rest in peace lmms::numbers::tau, my beloved
* Add missing #include <numbers>
* replace stray use of F_EPSILON with approximatelyEqual()
* make many constants inline constexpr
A lot of the remaining constants in lmms_constants.h are specific to
SaProcessor. If they are only used there, shouldn't they be in SaProcessor.h?
* ok then, it's allowed to be signed
* remove #include "lmms_constants.h" for files that don't need it
- And also move F_EPSILON into lmms_math.h
- And also add an overload for fast_rand() to specify a higher and lower bound
- And a bunch of other nonsense
* ok then, it's allowed to be inferred
* ok then, it can accept an integral
* fix typo
* appease msvc
* appease msvc again
* Replace linearInterpolate with std::lerp()
As well as time travel to undo several foolish decisions and squash tiny
commits together
* Fix msvc constexpr warnings
* Fix msvc float to double truncation warning
* Apply two suggestions from code review
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
* Apply suggestions from code review
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
* fix silly mistake
* Remove SlicerT's dependence on lmms_math.h
* Allow more type inference on fastRand() and fastPow10f()
* Apply suggestions from code review
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
* Clean up fastRand() a little bit more
---------
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
* use c++ std::* math functions
This updates usages of sin, cos, tan, pow, exp, log, log10, sqrt, fmod, fabs, and fabsf,
excluding any usages that look like they might be part of a submodule or 3rd-party code.
There's probably some std math functions not listed here that haven't been updated yet.
* fix std::sqrt typo
lmao one always sneaks by
* Apply code review suggestions
- std::pow(2, x) -> std::exp2(x)
- std::pow(10, x) -> lmms::fastPow10f(x)
- std::pow(x, 2) -> x * x, std::pow(x, 3) -> x * x * x, etc.
- Resolve TODOs, fix typos, and so forth
Co-authored-by: Rossmaxx <74815851+Rossmaxx@users.noreply.github.com>
* Fix double -> float truncation, DrumSynth fix
I mistakenly introduced a bug in my recent PR regarding template
constants, in which a -1 that was supposed to appear outside of an abs()
instead was moved inside it, screwing up the generated waveform. I fixed
that and also simplified the function by factoring out the phase domain
wrapping using the new `ediv()` function from this PR. It should behave
how it's supposed to now... assuming all my parentheses are in the right
place lol
* Annotate magic numbers with TODOs for C++20
* On second thought, why wait?
What else is lmms::numbers for?
* begone inline
Co-authored-by: Rossmaxx <74815851+Rossmaxx@users.noreply.github.com>
* begone other inline
Co-authored-by: Rossmaxx <74815851+Rossmaxx@users.noreply.github.com>
* Re-inline function in lmms_math.h
For functions, constexpr implies inline so this just re-adds inline to
the one that isn't constexpr yet
* Formatting fixes, readability improvements
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
* Fix previously missed pow() calls, cleanup
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
* Just delete ediv() entirely lmao
No ediv(), no std::fmod(), no std::remainder(), just std::floor().
It should all work for negative phase inputs as well. If I end up
needing ediv() in the future, I can add it then.
* Simplify DrumSynth triangle waveform
This reuses more work and is also a lot more easy to visualize.
It's probably a meaningless micro-optimization, but it might be worth changing it back to a switch-case and just calculating ph_tau and saw01 at the beginning of the function in all code paths, even if it goes unused for the first two cases. Guess I'll see if anybody has strong opinions about it.
* Move multiplication inside abs()
* Clean up a few more pow(x, 2) -> x * x
* Remove numbers::inv_pi, numbers::inv_tau
* delete spooky leading 0
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
---------
Co-authored-by: Rossmaxx <74815851+Rossmaxx@users.noreply.github.com>
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
* add templates for common geometric constants
* oops missed one
* LD_2PI -> LD_PI
i re-added the wrong constant ffs
* CamelCase names and also verify compilation without -DLMMS_MINIMAL
* C++20 stuff
Updated to account for `<numbers>` and C++20:
- Marked all `lmms_constants.h` constants with an exact equivalent in `<numbers>` as deprecated
- Removed all `lmms_constants.h` constants where no variant is currently in use
- Using `inline constexpr`
- Using `std::floating_point` concept instead of `typename`
* add lmms::numbers namespace
* Remove panning_constants.h
Moves the four constants in panning_constants.h into panning.h, then
removes panning.h.
* Use std::exp(n) instead of powf(numbers::e, n)
* Use C++ std math functions
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
* Use overloaded std math functions
An attempt to fix compiler warnings on some platforms
* Remove uses of __USE_XOPEN
And also update two functions I missed from the previous commit
* Missed a few
* Fix ANOTHER std math function use
Of course there's another one
---------
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
* Remove the struct StereoSample
Remove the struct `StereoSample`. Let `AudioEngine::getPeakValues` return a `sampleFrame` instead.
Adjust the calls in `Mixer` and `Oscilloscope`.
* Simplify AudioEngine::getPeakValues
* Remove surroundSampleFrame
Some code assumes that `surroundSampleFrame` is interchangeable with `sampleFrame`. Thus, if the line `#define LMMS_DISABLE_SURROUND` is commented out in `lmms_basics.h` then the code does not compile anymore because `surroundSampleFrame` now is defined to be an array with four values instead of two. There also does not seem to be any support for surround sound (four channels instead of two) in the application. The faders and mixers do not seem to support more that two channels and the instruments and effects all expect a `sampleFrame`, i.e. stereo channels. It therefore makes sense to remove the "feature" because it also hinders the improvement of `sampleFrame`, e.g. by making it a class with some convenience methods that act on `sampleFrame` instances.
All occurrences of `surroundSampleFrame` are replaced with `sampleFrame`.
The version of `BufferManager::clear` that takes a `surroundSampleFrame` is removed completely.
The define `SURROUND_CHANNELS` is removed. All its occurrences are replaced with `DEFAULT_CHANNELS`.
Most of the audio devices classes, i.e. classes that inherit from `AudioDevice`, now clamp the configuration parameter between two values of `DEFAULT_CHANNELS`. This can be improved/streamlined later.
`BYTES_PER_SURROUND_FRAME` has been removed as it was not used anywhere anyway.
* Make sampleFrame a class
Make `sampleFrame` a class with several convenience methods. As a first step and demonstration adjust the follow methods to make use of the new functionality:
* `AudioEngine::getPeakValues`: Much more concise now.
* `lmms::MixHelpers::sanitize`: Better structure, better readable, less dereferencing and juggling with indices.
* `AddOp`, `AddMultipliedOp`, `multiply`: Make use of operators. Might become superfluous in the future.
* More operators and methods for sampleFrame
Add some more operators and methods to `sampleFrame`:
* Constructor which initializes both channels from a single sample value
* Assignment operator from a single sample value
* Addition/multiplication operators
* Scalar product
Adjust some more plugins to the new functionality of `sampleFrame`.
* Adjust DelayEffect to methods in sampleFrame
* Use composition instead of inheritance
Using inheritance was the quickest way to enable adding methods to `sampleFrame` without having to reimpement much of `std::array`s interface.
This is changed with this commit. The array is now a member of `sampleFrame` and the interface is extended with the necessary methods `data` and the index operator.
An `average` method was added so that no iterators need to be implemented (see changes in `SampleWaveform.cpp`).
* Apply suggestions from code review
Apply Veratil's suggestions from the code review
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Fix warnings: zeroing non-trivial type
Fix several warnings of the following form:
Warnung: »void* memset(void*, int, size_t)« Säubern eines Objekts von nichttrivialem Typ »class lmms::sampleFrame«; use assignment or value-initialization instead [-Wclass-memaccess]
* Remove unnecessary reinterpret_casts
Remove some unnecessary reinterpret_casts with regards to `sampleFrame` buffers.
`PlayHandle::m_playHandleBuffer` already is a `sampleFrame*` and does not need a reinterpret_cast anymore.
In `LadspaEffect::processAudioBuffer` the `QVarLengthArray` is now directly initialized as an array of `sampleFrame` instances.
I guess in both places the `sampleFrame` previously was a `surroundSampleFrame` which has been removed.
* Clean up zeroSampleFrames code
* Fix warnings in RemotePlugin
Fix some warnings related to calls to `memcpy` in conjunction with`sampleFrame` which is now a class.
Add the helper functions `copyToSampleFrames` and `copyFromSampleFrames` and use them. The first function copies data from a `float` buffer into a `sampleFrame` buffer and the second copies vice versa.
* Rename "sampleFrame" to "SampleFrame"
Uppercase the name of `sampleFrame` so that it uses UpperCamelCase convention.
* Move SampleFrame into its own file
Move the class `SampleFrame` into its own class and remove it from `lmms_basics.h`.
Add forward includes to all headers where possible or include the `SampleFrame` header if it's not just referenced but used.
Add include to all cpp files where necessary.
It's a bit surprising that the `SampleFrame` header does not need to be included much more often in the implementation/cpp files. This is an indicator that it seems to be included via an include chain that at one point includes one of the headers where an include instead of a forward declaration had to be added in this commit.
* Return reference for += and *=
Return a reference for the compound assignment operators `+=` and `-=`.
* Explicit float constructor
Make the constructor that takes a `float` explicit.
Remove the assignment operator that takes a `float`. Clients must use the
explicit `float` constructor and assign the result.
Adjust the code in "BitInvader" accordingly.
* Use std::fill in zeroSampleFrames
* Use zeroSampleFrames in sanitize
* Replace max with absMax
Replace `SampleFrame::max` with `SampleFrame::absMax`.
Use `absMax` in `DelayEffect::processAudioBuffer`. This should also fix
a buggy implementation of the peak computation.
Add the function `getAbsPeakValues`. It computes the absolute peak
values for a buffer.
Remove `AudioEngine::getPeakValues`. It's not really the business of the
audio engine. Let `Mixer` and `Oscilloscope` use `getAbsPeakValues`.
* Replace scalarProduct
Replace the rather mathematical method `scalarProduct` with
`sumOfSquaredAmplitudes`. It was always called on itself anyway.
* Remove comment/TODO
* Simplify sanitize
Simplify the `sanitize` function by getting rid of the `bool found` and
by zeroing the buffer as soon as a problem is found.
* Put pointer symbols next to type
* Code review adjustments
* Remove "#pragme once"
* Adjust name of include guard
* Remove superfluous includes (leftovers from previous code changes)
---------
Co-authored-by: Kevin Zander <veratil@gmail.com>
This PR places all LMMS symbols into namespaces to eliminate any potential future name collisions between LMMS and third-party modules.
Also, this PR changes back `LmmsCore` to `Engine`, reverting c519921306 .
Co-authored-by: allejok96 <allejok96@gmail.com>
