* changed font sizes to better values
* rename gui_templates.h to FontHelper.h
* replace hardcoded values with constants
* make knob labels use small font
* code review from michael
* more consolidation
* Fix text problem in Vectorscope
Fix a problem with cutoff text in Vectorscope. During the constructor
call of `LedCheckBox` the method `LedCheckBox::onTextUpdated` is
triggered which sets a fixed size that fits the pixmap and the text.
After instantiating the two instances in `VecControlsDialog` the
constructor then set a minimum size which overrode the fixed size that
was previously set. This then led to text that was cutoff.
---------
Co-authored-by: Michael Gregorius <michael.gregorius.git@arcor.de>
Defines `fpp_t` and `f_cnt_t` to be of `size_t` within `lmms_basics.h`. Most of the codebase used `fpp_t` to represent the size of an array of sample frames, which is incorrect, given that `fpp_t` was only 16 bits when sizes greater than 32767 are very possible. `f_cnt_t` was defined as `size_t` as well for consistency.
---------
Co-authored-by: Dominic Clark <mrdomclark@gmail.com>
Adjust and rename the function `pointSize` so that it sets the font size in pixels. Rename `pointSize` to `adjustedToPixelSize` because that's what it does now. It returns a font adjusted to a given pixel size. Rename `fontPointer` to `font` because it's not a pointer but a copy. Rename `fontSize` to simply `size`.
This works if the intended model is that users use global fractional scaling. In that case pixel sized fonts are also scaled so that they should stay legible for different screen sizes and pixel densities.
## Adjust plugins with regards to adjustedToPixelSize
Adjust the plugins with regards to the use of `adjustedToPixelSize`.
Remove the explicit setting of the font size of combo boxes in the following places to make the combo boxes consistent:
* `AudioFileProcessorView.cpp`
* `DualFilterControlDialog.cpp`
* `Monstro.cpp` (does not even seem to use text)
* `Mallets.cpp`
Remove calls to `adjustedToPixelSize` in the following places because they can deal with different font sizes:
* `LadspaBrowser.cpp`
Set an explicit point sized font size for the "Show GUI" button in `ZynAddSubFx.cpp`
Increase the font size of the buttons in the Vestige plugin and reduce code repetition by introducing a single variable for the font size.
I was not able to find out where the font in `VstEffectControlDialog.cpp` is shown. So it is left as is for now.
## Adjust the font sizes in the area of GUI editors and instruments.
Increase the font size to 10 pixels in the following places:
* Effect view: "Controls" button and the display of the effect name at the bottom
* Automation editor: Min and max value display to the left of the editor
* InstrumentFunctionViews: Labels "Chord:", "Direction:" and "Mode:"
* InstrumentMidiIOView: Message display "Specify the velocity normalization base for MIDI-based instruments at 100% note velocity."
* InstrumentSoundShapingView: Message display "Envelopes, LFOs and filters are not supported by the current instrument."
* InstrumentTuningView: Message display "Enables the use of global transposition"
Increase the font size to 12 pixels in the mixer channel view, i.e. the display of the channel name.
Render messages in system font size in the following areas because there should be enough space for almost all sizes:
* Automation editor: Message display "Please open an automation clip by double-clicking on it!"
* Piano roll: Message display "Please open a clip by double-clicking on it!"
Use the application font for the line edit that can be used to change the instrument name.
Remove overrides which explicitly set the font size for LED check boxes in:
* EnvelopeAndLfoView: Labels "FREQ x 100" and "MODULATE ENV AMOUNT"
Remove overrides which explicitly set the font size for combo boxes in:
* InstrumentSoundShapingView: Filter combo box
## Adjust font sizes in widgets
Adjust the font sizes in the area of the custom GUI widgets.
Increase and unify the pixel font size to 10 pixels in the following classes:
* `ComboBox`
* `GroupBox`
* `Knob`
* `LcdFloatSpinBox`
* `LcdWidget`
* `LedCheckBox`
* `Oscilloscope`: Display of "Click to enable"
* `TabWidget`
Shorten the text in `EnvelopeAndLfoView` from "MODULATE ENV AMOUNT" to "MOD ENV AMOUNT" to make it fit with the new font size of `LedCheckBox`.
Remove the setting of the font size in pixels from `MeterDialog` because it's displayed in a layout and can accommodate all font sizes. Note: the dialog can be triggered from a LADSPA plugin with tempo sync, e.g. "Allpass delay line". Right click on the time parameter and select "Tempo Sync > Custom..." from the context menu.
Remove the setting of the font size in `TabBar` as none of the added `TabButton` instances displays text in the first place.
Remove the setting of the font size in `TabWidget::addTab` because the font size is already set in the constructor. It would be an unexpected size effect of setting a tab anyway. Remove a duplicate call to setting the font size in `TabWidget::paintEvent`.
Remove unnecessary includes of `gui_templates.h` wherever this is possible now.
## Direct use of setPixelSize
Directly use `setPixelSize` when drawing the "Note Velocity" and "Note Panning" strings as they will likely never be drawn using point sizes.
* clang-tidy: Apply cppcoreguidelines-init-variables everywhere (treating NaNs as zeros)
* Initialize msec and tick outside switch
* Update plugins/Vestige/Vestige.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update plugins/Vestige/Vestige.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update plugins/Vestige/Vestige.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update plugins/VstEffect/VstEffectControls.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/core/DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update plugins/VstEffect/VstEffectControls.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update plugins/VstEffect/VstEffectControls.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/core/DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/core/DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/core/DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/core/DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/core/DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/core/DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Use initialization with =
* Use tabs
* Use static_cast
* Update DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/core/DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Do not use tabs for alignment in src/core/DrumSynth.cpp
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
* Move x variable inside loop
* Use ternary operator for b variable
* Revert "Use tabs"
This reverts commit 07afd8a83f58b539c3673310b2aad4b63c9198a0.
* Remove unnecessary variables in XpressiveView
* Simplify initialization in Plugin
* Combine declaration and initialization in EqCurve
* Combine declaration and initialization in Song
* Combine declaration and initialization in AudioAlsa
* Combine declaration and initialization in EqCurve (again)
* Missed some
* Undo changes made to non-LMMS files
* Undo indentation changes in SidInstrument.cpp
* Combine declaration with assignment in IoHelper
* Combine declaration with assignment using auto in Carla
* Combine declaration with assignment
* Combine declaration with assignment in BasicFilters
* Simplify assignments in AudioFileProcessorWaveView::zoom
* Simplify out sample variable in BitInvader
* Remove sampleLength variable in DelayEffect
* Move gain variable in DynamicsProcessor
* Combine peak variable declaration with assignment in EqSpectrumView
* Move left/right lfo variables in for loop in FlangerEffect
* Use ternary operator for group variable in LadspaControlDialog
* Combine declaration with assignment in Lb302
* Combine declaration with assignment in MidiExport
* Combine declaration with assignment in MidiFile
* Combine declaration with assignment in MidiImport
* Use ternary operator for vel_adjusted variable in OpulenZ
* Move tmpL and dcblkL variables in for loop in ReverbSC
* Combine declaration with initialization in SlicerT
* Combine declaration with assignment in SaSpectrumView
* Combine declaration with assignment in SaWaterfallView
* Combine declaration with assignment in StereoEnhancerEffect
* Combine declaration with assignment in VibratingString
* Combine declaration with assignment in VstEffectControls
* Combine declaration with assignment in Xpressive
* Combine declaration with assignment in AutomatableModel
* Combine declaration with assignment in AutomationClip
* Move sample variable in for loop in BandLimitedWave
* Combine declaration with assignment in DataFile
* Combine declaration with assignment in DrumSynth
* Combine declaration with assignment in Effect
* Remove redundant assignment to nphsLeft in InstrumentPlayHandle
* Combine declaration with assignment in LadspaManager
* Combine declaration with assignment in LinkedModelGroups
* Combine declaration with assignment in MemoryHelper
* Combine declaration with assignment in AudioAlsa
* Combine declaration with assignment in AudioFileOgg
* Combine declaration with assignment in AudioPortAudio
* Combine declaration with assignment in AudioSoundIo
* Combine declaration with assignment in Lv2Evbuf
* Combine declaration with assignment in Lv2Proc
* Combine declaration with assignment in main
* Combine declaration with assignment in MidiAlsaRaw
* Combine declaration with assignment in MidiAlsaSeq
* Combine declaration with assignment in MidiController
* Combine declaration with assignment in MidiJack
* Combine declaration with assignment in MidiSndio
* Combine declaration with assignment in ControlLayout
* Combine declaration with assignment in MainWindow
* Combine declaration with assignment in ProjectNotes
* Use ternary operator for nextValue variable in AutomationClipView
* Combine declaration with assignment in AutomationEditor
* Move length variable in for-loop in PianoRoll
* Combine declaration with assignment in ControllerConnectionDialog
* Combine declaration with assignment in Graph
* Combine declaration with assignment in LcdFloatSpinBox
* Combine declaration with assignment in TimeDisplayWidget
* Remove currentNote variable in InstrumentTrack
* Combine declaration with assignment in DrumSynth (again)
* Use ternary operator for factor variable in BitInvader
* Use ternary operator for highestBandwich variable in EqCurve
Bandwich?
* Move sum variable into for loop in Graph
* Fix format in MidiSndio
* Fixup a few more
* Cleanup error variables
* Use ternary operators and combine declaration with initialization
* Combine declaration with initialization
* Update plugins/LadspaEffect/LadspaControlDialog.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update plugins/OpulenZ/OpulenZ.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update plugins/SpectrumAnalyzer/SaProcessor.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/core/midi/MidiAlsaRaw.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/gui/MainWindow.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/gui/clips/AutomationClipView.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/gui/editors/AutomationEditor.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/gui/widgets/Fader.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Move static_cast conversion into separate variable
* Use real index when interpolating
* Remove empty line
* Make helpBtn a private member
* Move controller type into separate variable
* Fix format of DrumSynth::waveform function
* Use tabs and static_cast
* Remove redundant if branch
* Refactor using static_cast/reinterpret_cast
* Add std namespace prefix
* Store repeated conditional into boolean variable
* Cast to int before assigning to m_currentLength
* Rename note_frames to noteFrames
* Update src/core/Controller.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/core/DrumSynth.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Update src/gui/widgets/Graph.cpp
Co-authored-by: Kevin Zander <veratil@gmail.com>
* Revert changes that initialized variables redudantly
For situations where the initialization is
more complex or passed into a function
by a pointer, we dont need to do
initialization ourselves since it is
already done for us, just in a different way.
* Remove redundant err variable
* Remove explicit check of err variable
* Clean up changes and address review
* Do not initialize to 0/nullptr when not needed
* Wrap condition in parentheses for readability
---------
Co-authored-by: Kevin Zander <veratil@gmail.com>
Co-authored-by: Dalton Messmer <messmer.dalton@gmail.com>
* remove the gui_templates header where functions not used
* refactor and replace template with function argument
* refactor: merge pointSizeF function with pointSize
* removed template per michael's review
* use std::max for more readability
* remove the QDesktopWidget header
* cleanup arguments and remove parentheses from return
* Fix crash in Audio File Processor
Fix a crash in the Audio File Processor that occurs when an Audio File Processor with a reversed sample is loaded from a save file and then the plugin window is opened.
The problem was caused by a call to `AudioFileProcessorWaveView::slideSampleByFrames` during the execution of constructor of `AudioFileProcessorWaveView`. In that situation the three `knob` members were all `nullptr` because for some reason there was an explicit setter for them which was only called after construction. This is fixed by passing and setting the knobs in the constructor.
Another question is if it's not a problem in the first place that the knobs are given to the `AudioFileProcessorWaveView` instead of their underlying models.
* Add private setters for "from" and "to"
Add private setters for the "from" and "to" values in `AudioFileProcessorWaveView`. When being used the setters will ensure that the bounds are respected.
Also add a `range` method because this computation was done repeatedly throughout the code.
Fixes#7068 but masks some of the original problems with the code that computes out-of-bounds values for "from" and "to" like the `slide` method. Problematic code can still be found by temporarily adding the following assertions to the setters:
* `assert (to <= m_sample->sampleSize());` in `setTo`
* `assert (from >= 0);` in `setFrom`
* Remove superfluous calls to qMax and qMin
## Extract views
Extract the classes `AudioFileProcessorWaveView` and `AudioFileProcessorView` into their own files.
Reformat the new classes by removing unnecessary whitespace and underscores. Add spaces to if-statements.
Cleanup the includes.
## Remove friend relationship
Remove the friend relationship between `AudioFileProcessor` and `AudioFileProcessorView`.
Introduce getters for entities that the view is interested in.
