mirror/motion
1
0
Fork 0
mirror of https://github.com/Motion-Project/motion.git synced 2026-01-19 20:28:24 -05:00
Code Issues Packages Projects Releases Wiki Activity
Files
d8063fb1df2bdfacb451ca87ee7015afebeea35d
motion/motion.h
AngelCarpintero 07f9e36891 fixes in new log system
2010-04-05 03:02:41 +00:00

455 lines
14 KiB
C
Raw Blame History

/* motion.h
*
* Include file for motion.c
* Copyright 2000 by Jeroen Vreeken (pe1rxq@amsat.org)
* This software is distributed under the GNU public license version 2
* See also the file 'COPYING'.
*
*/
#ifndef _INCLUDE_MOTION_H
#define _INCLUDE_MOTION_H
#include "config.h"
#if defined(__FreeBSD__) || defined(__NetBSD__)
#define BSD
#endif
/* Includes */
#ifdef HAVE_MYSQL
#include <mysql.h>
#endif
#ifdef HAVE_SQLITE3
#include <sqlite3.h>
#endif
#ifdef HAVE_PGSQL
#include <libpq-fe.h>
#endif
#include <stdio.h>
#include <stdlib.h>
#ifndef __USE_GNU
#define __USE_GNU
#endif
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <time.h>
#include <signal.h>
#include <limits.h>
#include <errno.h>
#include <sys/time.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <sys/ioctl.h>
#include <sys/param.h>
#include <stdint.h>
#define _LINUX_TIME_H 1
#if (!defined(WITHOUT_V4L)) && (!defined(BSD))
#include <linux/videodev.h>
#endif
#include <pthread.h>
#include "logger.h"
#include "conf.h"
#include "stream.h"
#include "webhttpd.h"
/**
* ATTRIBUTE_UNUSED:
*
* Macro used to signal to GCC unused function parameters
*/
#ifdef __GNUC__
#ifdef HAVE_ANSIDECL_H
#include <ansidecl.h>
#endif
#ifndef ATTRIBUTE_UNUSED
#define ATTRIBUTE_UNUSED __attribute__((unused))
#endif
#else
#define ATTRIBUTE_UNUSED
#endif
/* strerror_r() XSI vs GNU */
#if (defined(BSD)) || ((_POSIX_C_SOURCE >= 200112L || _XOPEN_SOURCE >= 600) && ! _GNU_SOURCE)
#define XSI_STRERROR_R
#endif
/*
* The macro below defines a version of sleep using nanosleep
* If a signal such as SIG_CHLD interrupts the sleep we just continue sleeping
*/
#define SLEEP(seconds, nanoseconds) { \
struct timespec tv; \
tv.tv_sec = (seconds); \
tv.tv_nsec = (nanoseconds); \
while (nanosleep(&tv, &tv) == -1); \
}
#define CLEAR(x) memset(&(x), 0, sizeof(x))
#if defined(WITHOUT_V4L) || defined(BSD)
#define VIDEO_PALETTE_GREY 1 /* Linear greyscale */
#define VIDEO_PALETTE_HI240 2 /* High 240 cube (BT848) */
#define VIDEO_PALETTE_RGB565 3 /* 565 16 bit RGB */
#define VIDEO_PALETTE_RGB24 4 /* 24bit RGB */
#define VIDEO_PALETTE_RGB32 5 /* 32bit RGB */
#define VIDEO_PALETTE_RGB555 6 /* 555 15bit RGB */
#define VIDEO_PALETTE_YUV422 7 /* YUV422 capture */
#define VIDEO_PALETTE_YUYV 8
#define VIDEO_PALETTE_UYVY 9 /* The great thing about standards is ... */
#define VIDEO_PALETTE_YUV420 10
#define VIDEO_PALETTE_YUV411 11 /* YUV411 capture */
#define VIDEO_PALETTE_RAW 12 /* RAW capture (BT848) */
#define VIDEO_PALETTE_YUV422P 13 /* YUV 4:2:2 Planar */
#define VIDEO_PALETTE_YUV411P 14 /* YUV 4:1:1 Planar */
#define VIDEO_PALETTE_YUV420P 15 /* YUV 4:2:0 Planar */
#define VIDEO_PALETTE_YUV410P 16 /* YUV 4:1:0 Planar */
#define VIDEO_PALETTE_PLANAR 13 /* start of planar entries */
#define VIDEO_PALETTE_COMPONENT 7 /* start of component entries */
#endif
#define DEF_PALETTE 17
/* Default picture settings */
#define DEF_WIDTH 352
#define DEF_HEIGHT 288
#define DEF_QUALITY 75
#define DEF_CHANGES 1500
#define DEF_MAXFRAMERATE 100
#define DEF_NOISELEVEL 32
/* Minimum time between two 'actions' (email, sms, external) */
#define DEF_EVENT_GAP 60 /* 1 minutes */
#define DEF_MAXMOVIETIME 3600 /* 60 minutes */
#define DEF_FFMPEG_BPS 400000
#define DEF_FFMPEG_VBR 0
#define DEF_FFMPEG_CODEC "mpeg4"
#define THRESHOLD_TUNE_LENGTH 256
#define MISSING_FRAMES_TIMEOUT 30 /* When failing to get picture frame from camera
we reuse the previous frame until
MISSING_FRAMES_TIMEOUT seconds has passed
and then we show a grey image instead
*/
#define WATCHDOG_TMO 30 /* 30 sec max motion_loop interval */
#define WATCHDOG_OFF -127 /* Turn off watchdog, used when we wants to quit a thread */
#define CONNECTION_KO "Lost connection"
#define CONNECTION_OK "Connection OK"
#define DEF_MAXSTREAMS 10 /* Maximum number of stream clients per camera */
#define DEF_MAXWEBQUEUE 10 /* Maximum number of stream client in queue */
#define DEF_TIMESTAMP "%Y-%m-%d\\n%T"
#define DEF_EVENTSTAMP "%Y%m%d%H%M%S"
#define DEF_SNAPPATH "%v-%Y%m%d%H%M%S-snapshot"
#define DEF_IMAGEPATH "%v-%Y%m%d%H%M%S-%q"
#define DEF_MOVIEPATH "%v-%Y%m%d%H%M%S"
#define DEF_TIMEPATH "%Y%m%d-timelapse"
#define DEF_TIMELAPSE_MODE "daily"
/* Do not break this line into two or more. Must be ONE line */
#define DEF_SQL_QUERY "sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')"
/* OUTPUT Image types */
#define IMAGE_TYPE_JPEG 0
#define IMAGE_TYPE_PPM 1
/* Filetype defines */
#define FTYPE_IMAGE 1
#define FTYPE_IMAGE_SNAPSHOT 2
#define FTYPE_IMAGE_MOTION 4
#define FTYPE_MPEG 8
#define FTYPE_MPEG_MOTION 16
#define FTYPE_MPEG_TIMELAPSE 32
#define FTYPE_MPEG_ANY (FTYPE_MPEG | FTYPE_MPEG_MOTION | FTYPE_MPEG_TIMELAPSE)
#define FTYPE_IMAGE_ANY (FTYPE_IMAGE | FTYPE_IMAGE_SNAPSHOT | FTYPE_IMAGE_MOTION)
/* What types of images files do we want to have */
#define NEWIMG_OFF 0
#define NEWIMG_ON 1
#define NEWIMG_FIRST 2
#define NEWIMG_BEST 4
#define NEWIMG_CENTER 8
#define LOCATE_OFF 0
#define LOCATE_ON 1
#define LOCATE_PREVIEW 2
#define LOCATE_BOX 1
#define LOCATE_REDBOX 2
#define LOCATE_CROSS 4
#define LOCATE_REDCROSS 8
#define LOCATE_NORMAL 1
#define LOCATE_BOTH 2
#define UPDATE_REF_FRAME 1
#define RESET_REF_FRAME 2
#define BUFSIZE_1MEG (1024 * 1024)
/* Forward declaration, used in track.h */
struct images;
#include "track.h"
#include "netcam.h"
/*
* Structure to hold images information
* The idea is that this should have all information about a picture e.g. diffs, timestamp etc.
* The exception is the label information, it uses a lot of memory
* When the image is stored all texts motion marks etc. is written to the image
* so we only have to send it out when/if we want.
*/
/* A image can have detected motion in it, but dosn't trigger an event, if we use minimum_motion_frames */
#define IMAGE_MOTION 1
#define IMAGE_TRIGGER 2
#define IMAGE_SAVE 4
#define IMAGE_SAVED 8
#define IMAGE_PRECAP 16
#define IMAGE_POSTCAP 32
struct image_data {
unsigned char *image;
int diffs;
time_t timestamp; /* Timestamp when image was captured */
struct tm timestamp_tm;
int shot; /* Sub second timestamp count */
/*
* Movement center to img center distance
* Note: Dist is calculated distX*distX + distY*distY
*/
unsigned long cent_dist;
unsigned int flags; /* Se IMAGE_* defines */
struct coord location; /* coordinates for center and size of last motion detection*/
int total_labels;
};
/*
* DIFFERENCES BETWEEN imgs.width, conf.width AND rotate_data.cap_width
* (and the corresponding height values, of course)
* ===========================================================================
* Location Purpose
*
* conf The values in conf reflect width and height set in the
* configuration file. These can be set via http remote control,
* but they are not used internally by Motion, so it won't break
* anything. These values are transferred to imgs in vid_start.
*
* imgs The values in imgs are the actual output dimensions. Normally
* the output dimensions are the same as the capture dimensions,
* but for 90 or 270 degrees rotation, they are not. E.g., if
* you capture at 320x240, and rotate 90 degrees, the output
* dimensions are 240x320.
* These values are set from the conf values in vid_start, or
* from the first JPEG image in netcam_start. For 90 or 270
* degrees rotation, they are swapped in rotate_init.
*
* rotate_data The values in rotate_data are named cap_width and cap_height,
* and contain the capture dimensions. The difference between
* capture and output dimensions is explained above.
* These values are set in rotate_init.
*/
/* date/time drawing, draw.c */
int draw_text(unsigned char *image, unsigned int startx, unsigned int starty, unsigned int width, const char *text, unsigned int factor);
int initialize_chars(void);
struct images {
struct image_data *image_ring; /* The base address of the image ring buffer */
int image_ring_size;
int image_ring_in; /* Index in image ring buffer we last added a image into */
int image_ring_out; /* Index in image ring buffer we want to process next time */
unsigned char *ref; /* The reference frame */
unsigned char *out; /* Picture buffer for motion images */
int *ref_dyn; /* Dynamic objects to be excluded from reference frame */
unsigned char *image_virgin; /* Last picture frame with no text or locate overlay */
struct image_data preview_image; /* Picture buffer for best image when enables */
unsigned char *mask; /* Buffer for the mask file */
unsigned char *smartmask;
unsigned char *smartmask_final;
unsigned char *common_buffer;
int *smartmask_buffer;
int *labels;
int *labelsize;
int width;
int height;
int type;
int picture_type; /* Output picture type IMAGE_JPEG, IMAGE_PPM */
int size;
int motionsize;
int labelgroup_max;
int labels_above;
int labelsize_max;
int largest_label;
};
/* Contains data for image rotation, see rotate.c. */
struct rotdata {
/* Temporary buffer for 90 and 270 degrees rotation. */
unsigned char *temp_buf;
/*
* Degrees to rotate; copied from conf.rotate_deg. This is the value
* that is actually used. The value of conf.rotate_deg cannot be used
* because it can be changed by motion-control, and changing rotation
* while Motion is running just causes problems.
*/
int degrees;
/*
* Capture width and height - different from output width and height if
* rotating 90 or 270 degrees.
*/
int cap_width;
int cap_height;
};
/*
* These used to be global variables but now each thread will have its
* own context
*/
struct context {
FILE *extpipe;
int extpipe_open;
char conf_filename[PATH_MAX];
int threadnr;
unsigned int daemon;
char pid_file[PATH_MAX];
char log_file[PATH_MAX];
char log_type_str[6];
int log_level;
unsigned int log_type;
struct config conf;
struct images imgs;
struct trackoptions track;
struct netcam_context *netcam;
struct image_data *current_image; /* Pointer to a structure where the image, diffs etc is stored */
unsigned int new_img;
int locate_motion_mode;
int locate_motion_style;
int process_thisframe;
struct rotdata rotate_data; /* rotation data is thread-specific */
int noise;
int threshold;
int diffs_last[THRESHOLD_TUNE_LENGTH];
int smartmask_speed;
/* Commands to the motion thread */
volatile unsigned int snapshot; /* Make a snapshot */
volatile unsigned int makemovie; /* End a movie */
volatile unsigned int finish; /* End the thread */
volatile unsigned int restart; /* Restart the thread when it ends */
/* Is the motion thread running */
volatile unsigned int running;
volatile int watchdog;
pthread_t thread_id;
int event_nr;
int prev_event;
unsigned int lightswitch_framecounter;
char text_event_string[PATH_MAX]; /* The text for conv. spec. %C -
we assume PATH_MAX normally 4096 characters is fine */
int postcap; /* downcounter, frames left to to send post event */
int shots;
unsigned int detecting_motion;
struct tm *currenttime_tm;
struct tm *eventtime_tm;
time_t currenttime;
time_t lasttime;
time_t eventtime;
time_t connectionlosttime; /* timestamp from connection lost */
unsigned int lastrate;
unsigned int startup_frames;
unsigned int moved;
unsigned int pause;
int missing_frame_counter; /* counts failed attempts to fetch picture frame from camera */
unsigned int lost_connection;
#if (defined(BSD))
int tuner_dev;
#endif
int video_dev;
int pipe;
int mpipe;
struct stream stream;
int stream_count;
#if defined(HAVE_MYSQL) || defined(HAVE_PGSQL) || defined(HAVE_SQLITE3)
int sql_mask;
#endif
#ifdef HAVE_SQLITE3
sqlite3 *database_sqlite3;
#endif
#ifdef HAVE_MYSQL
MYSQL *database;
#endif
#ifdef HAVE_PGSQL
PGconn *database_pg;
#endif
int movie_fps;
char newfilename[PATH_MAX];
char extpipefilename[PATH_MAX];
int movie_last_shot;
#ifdef HAVE_FFMPEG
struct ffmpeg *ffmpeg_output;
struct ffmpeg *ffmpeg_output_debug;
struct ffmpeg *ffmpeg_timelapse;
struct ffmpeg *ffmpeg_smartmask;
char timelapsefilename[PATH_MAX];
char motionfilename[PATH_MAX];
#endif
};
extern pthread_mutex_t global_lock;
extern volatile int threads_running;
extern FILE *ptr_logfile;
/* TLS keys below */
extern pthread_key_t tls_key_threadnr; /* key for thread number */
int http_bindsock(int, int, int);
void * mymalloc(size_t);
void * myrealloc(void *, size_t, const char *);
FILE * myfopen(const char *, const char *, size_t);
int myfclose(FILE *);
size_t mystrftime(struct context *, char *, size_t, const char *, const struct tm *, const char *, int);
int create_path(const char *);
#endif /* _INCLUDE_MOTION_H */
Reference in New Issue View Git Blame Copy Permalink