Andrey Prygunkov
|
1230d9cdd4
|
added fast renaming of intentionally misnamed (rar-) files; the new renaming algorithm doesn't require full par-scan and restores original filenames in just a few seconds, even on very slow computers (NAS, media players, etc.); the fast renaming is performed automatically when requested by the built-in unpacker (option <Unpack> must be active)
|
2013-03-04 19:55:36 +00:00 |
|
Andrey Prygunkov
|
382faa49cb
|
added new option <InterDir> to put intermediate files during download into a separate directory (instead of storing them directly in destination directory (option <DestDir>); when nzb-file is completely (successfully) downloaded, repaired (if neccessary) and unpacked the files are moved to destination directory (option <DestDir> or <CategoryX.DestDir>); intermediate directory can significantly improve unpack performance if it is located on a separate physical hard drive
|
2013-03-01 20:32:17 +00:00 |
|
Andrey Prygunkov
|
749b4d3083
|
when a history item is post-processed again and the archive files were previously deleted because of option <UnpackCleanupDisk> the post-processing goes directly to script stage; if the archive files were kept, the full post-processing including unpack is performed instead
|
2013-02-28 20:23:50 +00:00 |
|
Andrey Prygunkov
|
940448ffae
|
added built-in unpack: 1) rar and 7-zip formats are supported (via external Unrar and 7-Zip executables); 2) new options <Unpack>, <UnpackPauseQueue>, <UnpackCleanupDisk>, <UnrarCmd>, <SevenZipCmd>; 3) web-interface now shows progress and estimated time during unpack (rar only; for 7-Zip progress is not available due to limitations of 7-Zip) 4) when built-in unpack is enabled, the post-processing script is called after unpack and possibly par-check/repair (if needed); 5) for nzb-files containing multiple collections (par-sets) the post-processing script is called only once, after the last par-set; 6) new parameter <NZBPP_UNPACKSTATUS> passed to post-processing script; 7) if the option <AllowReProcess> is enabled the post-processing-script is called after each par-set (as in previous versions); 8) example post-processing script updated: removed unrar-code, added check for unpack status; 9) new field <UnpackStatus> in result of RPC-method <history>; 10) history-dialog in web-interface shows three status: par-status, unpack-status, script-status; 11) with two built-in special post-processing parameters <*Unpack:> and <*Unpack:Password> the unpack can be disabled for individual nzb-file or the password can be set; 12) built-in special post-processing parameters can be set via web-interface on page <PP-Parameters> (when built-in unpack is enabled).
|
2013-02-06 22:04:50 +00:00 |
|
Andrey Prygunkov
|
3b08abca10
|
refactor: extracted par-related code from module <PrePostProcessor> into new module <ParCoordinator>
|
2013-01-23 21:32:36 +00:00 |
|
Andrey Prygunkov
|
60feae7e5b
|
new feature <Pause for X Minutes> in web-interface; new XML-/JSON-RPC method <scheduleresume>
|
2013-01-21 21:19:04 +00:00 |
|
Andrey Prygunkov
|
11c0563fe5
|
refactor: download speed and speed limit are now internally integers (Bytes) instead of floats (KB)
|
2013-01-18 21:36:17 +00:00 |
|
Andrey Prygunkov
|
2fcfbc2e1a
|
added new option <NzbAddedProcess> to setup a script called after a nzb-file is added to queue
|
2012-11-16 20:50:56 +00:00 |
|
Andrey Prygunkov
|
fdc9464576
|
added subcommand <W> to remote command <-S/--scan> to scan syncronously (wait until scan completed); added parameter <SyncMode> to XML/JSON-RPC method <scan>; the command <Scan> in web-interface now waits for completing of scan before reporting the status
|
2012-09-19 18:42:13 +00:00 |
|
Andrey Prygunkov
|
dc6c1a0fe1
|
with active option <AllowReProcess> the NZB considered completed even if there are paused non-par-files (the paused non-par-files are treated the same way as paused par-files): as a result the reprocessable script is called
|
2012-09-18 02:47:44 +00:00 |
|
Andrey Prygunkov
|
a384f0e6e9
|
prevent duplicate nzb-entries in the history
|
2012-07-03 20:21:11 +00:00 |
|
Andrey Prygunkov
|
3e81a03087
|
refactor: corrected inconsistent include of <config.h>
|
2012-06-23 18:58:56 +00:00 |
|
Andrey Prygunkov
|
4a069266d8
|
added new field <name> to nzb-info-object. It is initially set to the cleaned up name of the nzb-file. The renaming of the group changes this field. All RPC-methods related to nzb-object return the new field, the old field <NZBNicename> is now deprecated. The option <MergeNZB> now checks the <name>-field instead of <nzbfilename> (the latter is not changed when the nzb is renamed). New env-var-parameter <NZBPP_NZBNAME> for post-processing script.
|
2012-06-11 15:09:03 +00:00 |
|
Andrey Prygunkov
|
ab75a8b3e5
|
added the ability to queue URLs. The program automatically downloads nzb-files from given URLs and put them to download queue. When multiple URLs are added in a short time, they are put into a special URL-queue. The number of simultaneous URL-downloads are controlled via new option UrlConnections. With the new option ReloadUrlQueue can be controlled if the URL-queue should be reloaded after the program is restarted (if the URL-queue was not empty). New switch <-U> for remote-command <--append/-A> to queue an URL. New subcommand <-U> in the remote command <--list/-L> prints the current URL-queue. If URL-download fails, the URL is moved into history. With subcommand <-R> of command <--edit> the failed URL can be returned to URL-queue for redownload. The remote command <--list/-L> for history can now print the infos for URL history items. New XML/JSON-RPC command <appendurl> to add an URL or multiple URLs for download. New XML/JSON-RPC command <urlqueue> returns the items from the URL-queue. The XML/JSON-RPC command <history> was exteneded to provide infos about URL history items. The URL-queue obeys the pause-state of download queue. The URL-downloads support HTTP and HTTPS protocols.
|
2012-05-03 13:47:44 +00:00 |
|
Andrey Prygunkov
|
4856503a33
|
fixed: par-repair could fail when the filenames were not correctly parsed from article subjects
|
2011-12-29 21:30:25 +00:00 |
|
Andrey Prygunkov
|
2631550c2f
|
corrected the address of Free Software Foundation in copyright notice; corrected the spelling of authors name (caused by new rules for translating of cyrillic names to latin alphabet / english spelling)
|
2011-05-24 12:52:41 +00:00 |
|
Andrey Prygunkov
|
646ddb4ddb
|
fixed: elapsed time for active post-processing job was calculated incorrectly if the post-processor queue was paused; that could cause the interruption of active par-job when using the option <ParTimeLimit>
|
2010-02-08 16:08:10 +00:00 |
|
Andrey Prygunkov
|
8578078f7c
|
added second pause register, which is independent of main pause-state and therfore is intended for usage from external scripts; that allows to pause download without interferring with options <ParPauseQueue> and <PostPauseQueue> and scheduler tasks <PauseDownload> and <UnpauseDownload> - they all work with first (default) pause register; new subcommand <D2> for commands <--pause/-P> and <--unpause/-U>; new RPC-command <pausedownload2> and <resumedownload2>; existing RPC-commands <pause> und <resume> renamed to <pausedownload> and <resumedownload>; new field <Download2Paused> in result struct for RPC-command <status>; existing fields <ServerPaused> and <ParJobCount> renamed to <DownloadPaused> and <PostJobCount>; old RPC-commands and fields still exist for compatibility; the status output of command <--list/-L> indicates the state of second pause register; key <P> in curses-frontend can unpause second pause-register
|
2010-01-30 14:43:58 +00:00 |
|
Andrey Prygunkov
|
ab204281ed
|
fixed: script-status was not reset by <post-process again>
|
2010-01-29 09:53:57 +00:00 |
|
Andrey Prygunkov
|
1a9451fe61
|
command <pause post-processing> now not only pauses the post-processing queue but also pauses the current post-processing job (par-job or script-job); however the script-job can be paused only after the next line printed to screen
|
2009-12-08 21:50:53 +00:00 |
|
Andrey Prygunkov
|
5567c5abf6
|
fixed: reprocessing of a history item, which doesn't have any files left, caused a seg. fault
|
2009-09-26 19:54:53 +00:00 |
|
Andrey Prygunkov
|
b2e2c5c173
|
clearing the list of completeded files when adding a nzb-file to history if the cleaning up of queue (option <ParCleanupQueue>) is enabled (since there no more files in the nzb-file left, it cannot be returned to download queue; the list of completed files is not needed anymore)
|
2009-09-26 16:01:44 +00:00 |
|
Andrey Prygunkov
|
80116b6687
|
renamed ParStatus constant <FAILED> to <FAILURE> for a consistence with ScriptStatus constant <FAILURE>, that also affects the results of RPC-command <history>
|
2009-08-23 12:32:46 +00:00 |
|
Andrey Prygunkov
|
7d5225b2ba
|
added field <RemainingFileCount> to history items returned via RPC-command <history>
|
2009-08-23 12:18:44 +00:00 |
|
Andrey Prygunkov
|
f2f318b11e
|
fixed: returning the postprocessing exit code <92 - par-check all collections> when there were no par-files results in endless calling of postprocessing script
|
2009-08-22 13:31:03 +00:00 |
|
Andrey Prygunkov
|
6bfe1b0cfd
|
added actions <R> (return history item) and <P> (postprocess history item) for subcommand <H> of command <-E/--edit>; added actions <HistoryReturn> and <HistoryProcess> for remote RPC-command <editqueue>
|
2009-08-22 12:05:25 +00:00 |
|
Andrey Prygunkov
|
feadf59fa0
|
added history: new option <KeepHistory>, new remote subcommand <H> for commands <L> (list history entries) and <E> (delete history entries), new RPC-command <History> and subcommand <HistoryDelete> for command <EditQueue>; changed the result code returning status <ERROR> for postprocessing script from <1> to <94>
|
2009-06-30 16:08:41 +00:00 |
|
Andrey Prygunkov
|
123cfe6a38
|
added <binary> flag by opening of all files to explicitly set binary mode for compatibility with OSes which do not do that by default (like Posix does)
|
2009-06-11 21:13:37 +00:00 |
|
Andrey Prygunkov
|
34fe0f1077
|
refactoring: NZBInfo-objects now holds the status of completed post-process jobs; that made the list of completed post jobs unnecessary
|
2009-06-03 16:00:35 +00:00 |
|
Andrey Prygunkov
|
419b7fcb2c
|
refactoring: moved the code for checking the incoming nzb directory from <PrePostProcessor> into the new module <Scanner>
|
2009-05-29 22:37:51 +00:00 |
|
Andrey Prygunkov
|
6471928f91
|
added subcommand <S> to remote commands <--pause/-P> and <--unpause/-U> to pause/unpause the scanning of incoming nzb-directory; added commands <PauseScan> and <UnpauseScan> for scheduler option <TaskX.Command>; added remote commands <PauseScan> and <ResumeScan> for XML-/JSON-RPC
|
2009-05-25 20:18:20 +00:00 |
|
Andrey Prygunkov
|
4b538b419a
|
refactoring: extended the meaning of DowloadQueue-object, which now contains file queue, post-job queue, list of completed post-jobs and list of nzb-infos; post-jobs now have references to nzb-infos, what eiliminates duplicate infos; since file queue and post-job queue are now accessed via DownloadQueue only one locking mechanism for both queues is needed
|
2009-05-24 14:26:53 +00:00 |
|
Andrey Prygunkov
|
b1f6735e87
|
added pausing/resuming for post-processor queue; added new modifier <O> to remote commands <--pause/-P> and <--unpause/-U>; added new commands <postpause> and <postresume> to XML-/JSON-RPC; extended output of remote command <--list/-L> to indicate paused state of post-processor queue; extended command <status> of XML-/JSON-RPC with field <PostPause>
|
2009-05-06 19:28:54 +00:00 |
|
Andrey Prygunkov
|
bbdfb2b4f2
|
added modifier <O> to command <-E/--edit> for editing of post-processor-queue; following subcommands are supported: <+/-offset>, <T>, <B>, <D>; subcommand <D> supports deletion of queued post-jobs and active job as well; deletion of active job means the cancelling of par-check/repair or terminating of post-processing-script (including child processes of the script); updated remote-server to support new edit-subcommands in XML/JSON-RPC
|
2009-05-03 17:14:52 +00:00 |
|
Andrey Prygunkov
|
5d5c6b06b9
|
commited changes missed in previous revision
|
2009-04-24 05:48:55 +00:00 |
|
Andrey Prygunkov
|
4f1f72e1dc
|
fixed: second scan of incoming nzb-directory, introduced in r288, actually did not work very well
|
2009-03-10 20:17:02 +00:00 |
|
Andrey Prygunkov
|
8e78140259
|
added the second scan of incoming nzb-directory to ensure that files extracted by nzbprocess-script are scanned without a delay
|
2009-03-04 22:02:21 +00:00 |
|
Andrey Prygunkov
|
1376a05c6a
|
fixed: not all necessary par2-files were unpaused on first request for par-blocks (although harmless, because additional files were unpaused later anyway)
|
2009-02-16 22:23:45 +00:00 |
|
Andrey Prygunkov
|
685d83bd1e
|
remote command <scan> is now processed without checking of file timestamps (in contrast to automatic periodical checks)
|
2009-02-10 18:00:54 +00:00 |
|
Andrey Prygunkov
|
82ab166b94
|
fixed: options <ParPauseQueue> and <PostPauseQueue> did not work properly if both were enabled (bug introduced in r232)
|
2009-01-15 18:11:39 +00:00 |
|
Andrey Prygunkov
|
2c45a20ca7
|
cleaning up of download queue (option <ParCleanupQueue>) and deletion of source nzb-file (option <NzbCleanupDisk>) after par-repair now works also if par-repair was cancelled (option <ParTimeLimit>); since required par-files were already downloaded the repair in an external tool is possible
|
2008-12-10 22:04:06 +00:00 |
|
Andrey Prygunkov
|
42718d3f7a
|
added support for postprocess-parameters; new subcommand <O> of remote command <E> to add/modify pp-parameter for group (nzb-file); new XML-/JSON-RPC-subcommand <GroupSetParameter> of method <editqueue> for the same purpose; updated example configuration file and example postprocess-script to indicate new method of passing arguments via environment variables
|
2008-11-29 23:42:24 +00:00 |
|
Andrey Prygunkov
|
7be063f104
|
remote command <scan> is now executed asynchronously to prevent timeouts on client side
|
2008-11-15 14:57:57 +00:00 |
|
Andrey Prygunkov
|
5521fccf73
|
added command <--scan/-S> to execute the scan of nzb-directory on remote server
|
2008-11-13 19:40:18 +00:00 |
|
Andrey Prygunkov
|
ab584366f2
|
added option <ParTimeLimit>; added required patches for libpar2
|
2008-11-01 18:08:54 +00:00 |
|
Andrey Prygunkov
|
6aea979ca5
|
added option <MergeNzb> to automatically merge nzb-files with the same filename (useful by adding pars from a different source)
|
2008-10-24 20:08:49 +00:00 |
|
Andrey Prygunkov
|
34c7eb612a
|
added new subcommand <M> to edit-command <E> for merging of two (or more) groups (useful after adding pars from a separate nzb-file)
|
2008-10-23 18:29:40 +00:00 |
|
Andrey Prygunkov
|
b3d472f88d
|
extended the communication between nzbget and post-process-script and improved delayed parcheck; collections are now detected even if parcheck is disabled; two return codes allow to repair current collection or all collections
|
2008-10-21 22:15:30 +00:00 |
|
Andrey Prygunkov
|
6801fea2b1
|
added support for delayed par-check/repair (post-process-script can request par-check/repair using special exit code)
|
2008-10-18 18:52:58 +00:00 |
|
Andrey Prygunkov
|
effe010223
|
added special meaning for extension <.nzb_processed> for files in incoming directory; those files are now not passed to nzbprocess-script
|
2008-10-16 17:10:55 +00:00 |
|