From efd9604aa73f0da65f00b39339ded71c24a08368 Mon Sep 17 00:00:00 2001 From: Gani Georgiev Date: Fri, 22 May 2026 07:13:04 +0300 Subject: [PATCH] updated jsvm types --- CHANGELOG.md | 2 +- go.sum | 10 - .../jsvm/internal/types/generated/types.d.ts | 6405 +++++++++-------- 3 files changed, 3212 insertions(+), 3205 deletions(-) diff --git a/CHANGELOG.md b/CHANGELOG.md index 5af27c05..3fe249de 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -1,4 +1,4 @@ -## v0.38.2 (WIP) +## v0.38.2 - Added `RealtimeConnectRequestEvent.MaxTimeout` field to specify the absolute max duration a realtime connection can remain open (default to 30mins). _This is in addition to the `IdeTimeout` of 5mins in order to prevent misuse and to allow the GC to run more regularly._ diff --git a/go.sum b/go.sum index 8249c552..a2a3154d 100644 --- a/go.sum +++ b/go.sum @@ -26,8 +26,6 @@ github.com/frankban/quicktest v1.14.6 h1:7Xjx+VpznH+oBnejlPUj8oUpdxnVs4f8XU8WnHk github.com/frankban/quicktest v1.14.6/go.mod h1:4ptaffx2x8+WTWXmUCuVU6aPUX1/Mz7zb5vbUoiM6w0= github.com/fsnotify/fsnotify v1.7.0 h1:8JEhPFa5W2WU7YfeZzPNqzMP6Lwt7L2715Ggo0nosvA= github.com/fsnotify/fsnotify v1.7.0/go.mod h1:40Bi/Hjc2AVfZrqy+aj+yEI+/bRxZnMJyTJwOpGvigM= -github.com/fsnotify/fsnotify v1.10.1 h1:b0/UzAf9yR5rhf3RPm9gf3ehBPpf0oZKIjtpKrx59Ho= -github.com/fsnotify/fsnotify v1.10.1/go.mod h1:TLheqan6HD6GBK6PrDWyDPBaEV8LspOxvPSjC+bVfgo= github.com/gabriel-vasile/mimetype v1.4.13 h1:46nXokslUBsAJE/wMsp5gtO500a4F3Nkz9Ufpk2AcUM= github.com/gabriel-vasile/mimetype v1.4.13/go.mod h1:d+9Oxyo1wTzWdyVUPMmXFvp4F9tea18J8ufA774AB3s= github.com/ganigeorgiev/fexpr v0.5.0 h1:XA9JxtTE/Xm+g/JFI6RfZEHSiQlk+1glLvRK1Lpv/Tk= @@ -84,20 +82,14 @@ github.com/stretchr/testify v1.4.0 h1:2E4SXV/wtOkTonXsotYi4li6zVWxYlZuYNCXe9XRJy github.com/stretchr/testify v1.4.0/go.mod h1:j7eGeouHqKxXV5pUuKE4zz7dFj8WfuZ+81PSLYec5m4= go.yaml.in/yaml/v3 v3.0.4/go.mod h1:DhzuOOF2ATzADvBadXxruRBLzYTpT36CKvDb3+aBEFg= golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w= -golang.org/x/crypto v0.51.0 h1:IBPXwPfKxY7cWQZ38ZCIRPI50YLeevDLlLnyC5wRGTI= -golang.org/x/crypto v0.51.0/go.mod h1:8AdwkbraGNABw2kOX6YFPs3WM22XqI4EXEd8g+x7Oc8= golang.org/x/crypto v0.52.0 h1:RMs7fP2rXdep0CftQlK8Uf+kibLm7qkCcradZWYz988= golang.org/x/crypto v0.52.0/go.mod h1:1QgfPxDqh0T2M/elOJtp9RvuR95kVjir0e6/BvEmGbc= golang.org/x/image v0.0.0-20191009234506-e7c1f5e7dbb8/go.mod h1:FeLwcggjj3mMvU+oOTbSwawSJRM1uh48EjtB4UJZlP0= -golang.org/x/image v0.40.0 h1:Tw4GyDXMo+daZN1znreBRC3VayR1aLFUyUEOLUdW1a8= -golang.org/x/image v0.40.0/go.mod h1:uIc348UZMSvS5Z65CVZ7iDPaNobNFEPeJ4kbqTOszmA= golang.org/x/image v0.41.0 h1:8wS72eGJMJaBxK6okTzd4WaXumUlTVlb753MlsSvTCo= golang.org/x/image v0.41.0/go.mod h1:uIc348UZMSvS5Z65CVZ7iDPaNobNFEPeJ4kbqTOszmA= golang.org/x/mod v0.35.0 h1:Ww1D637e6Pg+Zb2KrWfHQUnH2dQRLBQyAtpr/haaJeM= golang.org/x/mod v0.35.0/go.mod h1:+GwiRhIInF8wPm+4AoT6L0FA1QWAad3OMdTRx4tFYlU= golang.org/x/net v0.0.0-20190603091049-60506f45cf65/go.mod h1:HSz+uSET+XFnRR8LxR5pz3Of3rY3CfYBVs4xY44aLks= -golang.org/x/net v0.54.0 h1:2zJIZAxAHV/OHCDTCOHAYehQzLfSXuf/5SoL/Dv6w/w= -golang.org/x/net v0.54.0/go.mod h1:Sj4oj8jK6XmHpBZU/zWHw3BV3abl4Kvi+Ut7cQcY+cQ= golang.org/x/net v0.55.0 h1:bcvxaJn3e1U6InsFWt1JUq1aSjnRxLzT2rtD2KfkDF8= golang.org/x/net v0.55.0/go.mod h1:L5U2KuzuOe1lY7Z+aWVIKK6qEeJXnXV9yzGA+WCHJww= golang.org/x/oauth2 v0.36.0 h1:peZ/1z27fi9hUOFCAZaHyrpWG5lwe0RJEEEeH0ThlIs= @@ -105,8 +97,6 @@ golang.org/x/oauth2 v0.36.0/go.mod h1:YDBUJMTkDnJS+A4BP4eZBjCqtokkg1hODuPjwiGPO7 golang.org/x/sync v0.20.0 h1:e0PTpb7pjO8GAtTs2dQ6jYa5BWYlMuX047Dco/pItO4= golang.org/x/sync v0.20.0/go.mod h1:9xrNwdLfx4jkKbNva9FpL6vEN7evnE43NNNJQ2LF3+0= golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY= -golang.org/x/sys v0.44.0 h1:ildZl3J4uzeKP07r2F++Op7E9B29JRUy+a27EibtBTQ= -golang.org/x/sys v0.44.0/go.mod h1:4GL1E5IUh+htKOUEOaiffhrAeqysfVGipDYzABqnCmw= golang.org/x/sys v0.45.0 h1:dO4czNzziLiiXplLQgBCEpCvXQ3dnkn0SdaZSYdQ+FY= golang.org/x/sys v0.45.0/go.mod h1:4GL1E5IUh+htKOUEOaiffhrAeqysfVGipDYzABqnCmw= golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ= diff --git a/plugins/jsvm/internal/types/generated/types.d.ts b/plugins/jsvm/internal/types/generated/types.d.ts index 4d3b41fd..47a18c2a 100644 --- a/plugins/jsvm/internal/types/generated/types.d.ts +++ b/plugins/jsvm/internal/types/generated/types.d.ts @@ -1,4 +1,4 @@ -// 1778818076 +// 1779420329 // GENERATED CODE - DO NOT MODIFY BY HAND // ------------------------------------------------------------------- @@ -1948,8 +1948,8 @@ namespace os { * than ReadFrom. This is used to permit ReadFrom to call io.Copy * without leading to a recursive call to ReadFrom. */ - type _soBBxlU = noReadFrom&File - interface fileWithoutReadFrom extends _soBBxlU { + type _sGozlON = noReadFrom&File + interface fileWithoutReadFrom extends _sGozlON { } interface File { /** @@ -1993,8 +1993,8 @@ namespace os { * than WriteTo. This is used to permit WriteTo to call io.Copy * without leading to a recursive call to WriteTo. */ - type _sflYBrP = noWriteTo&File - interface fileWithoutWriteTo extends _sflYBrP { + type _snJjIdl = noWriteTo&File + interface fileWithoutWriteTo extends _snJjIdl { } interface File { /** @@ -2940,8 +2940,8 @@ namespace os { * * The methods of File are safe for concurrent use. */ - type _sSBEBMp = file - interface File extends _sSBEBMp { + type _sBEtBrg = file + interface File extends _sBEtBrg { } /** * A FileInfo describes a file and is returned by [Stat] and [Lstat]. @@ -3333,427 +3333,234 @@ namespace filepath { } } -namespace security { - interface s256Challenge { +/** + * Package exec runs external commands. It wraps os.StartProcess to make it + * easier to remap stdin and stdout, connect I/O with pipes, and do other + * adjustments. + * + * Unlike the "system" library call from C and other languages, the + * os/exec package intentionally does not invoke the system shell and + * does not expand any glob patterns or handle other expansions, + * pipelines, or redirections typically done by shells. The package + * behaves more like C's "exec" family of functions. To expand glob + * patterns, either call the shell directly, taking care to escape any + * dangerous input, or use the [path/filepath] package's Glob function. + * To expand environment variables, use package os's ExpandEnv. + * + * Note that the examples in this package assume a Unix system. + * They may not run on Windows, and they do not run in the Go Playground + * used by go.dev and pkg.go.dev. + * + * # Executables in the current directory + * + * The functions [Command] and [LookPath] look for a program + * in the directories listed in the current path, following the + * conventions of the host operating system. + * Operating systems have for decades included the current + * directory in this search, sometimes implicitly and sometimes + * configured explicitly that way by default. + * Modern practice is that including the current directory + * is usually unexpected and often leads to security problems. + * + * To avoid those security problems, as of Go 1.19, this package will not resolve a program + * using an implicit or explicit path entry relative to the current directory. + * That is, if you run [LookPath]("go"), it will not successfully return + * ./go on Unix nor .\go.exe on Windows, no matter how the path is configured. + * Instead, if the usual path algorithms would result in that answer, + * these functions return an error err satisfying [errors.Is](err, [ErrDot]). + * + * For example, consider these two program snippets: + * + * ``` + * path, err := exec.LookPath("prog") + * if err != nil { + * log.Fatal(err) + * } + * use(path) + * ``` + * + * and + * + * ``` + * cmd := exec.Command("prog") + * if err := cmd.Run(); err != nil { + * log.Fatal(err) + * } + * ``` + * + * These will not find and run ./prog or .\prog.exe, + * no matter how the current path is configured. + * + * Code that always wants to run a program from the current directory + * can be rewritten to say "./prog" instead of "prog". + * + * Code that insists on including results from relative path entries + * can instead override the error using an errors.Is check: + * + * ``` + * path, err := exec.LookPath("prog") + * if errors.Is(err, exec.ErrDot) { + * err = nil + * } + * if err != nil { + * log.Fatal(err) + * } + * use(path) + * ``` + * + * and + * + * ``` + * cmd := exec.Command("prog") + * if errors.Is(cmd.Err, exec.ErrDot) { + * cmd.Err = nil + * } + * if err := cmd.Run(); err != nil { + * log.Fatal(err) + * } + * ``` + * + * Setting the environment variable GODEBUG=execerrdot=0 + * disables generation of ErrDot entirely, temporarily restoring the pre-Go 1.19 + * behavior for programs that are unable to apply more targeted fixes. + * A future version of Go may remove support for this variable. + * + * Before adding such overrides, make sure you understand the + * security implications of doing so. + * See https://go.dev/blog/path-security for more information. + */ +namespace exec { + interface command { /** - * S256Challenge creates base64 encoded sha256 challenge string derived from code. - * The padding of the result base64 string is stripped per [RFC 7636]. + * Command returns the [Cmd] struct to execute the named program with + * the given arguments. * - * [RFC 7636]: https://datatracker.ietf.org/doc/html/rfc7636#section-4.2 - */ - (code: string): string - } - interface md5 { - /** - * MD5 creates md5 hash from the provided plain text. - */ - (text: string): string - } - interface sha256 { - /** - * SHA256 creates sha256 hash as defined in FIPS 180-4 from the provided text. - */ - (text: string): string - } - interface sha512 { - /** - * SHA512 creates sha512 hash as defined in FIPS 180-4 from the provided text. - */ - (text: string): string - } - interface hs256 { - /** - * HS256 creates a HMAC hash with sha256 digest algorithm. - */ - (text: string, secret: string): string - } - interface hs512 { - /** - * HS512 creates a HMAC hash with sha512 digest algorithm. - */ - (text: string, secret: string): string - } - interface equal { - /** - * Equal compares two hash strings for equality without leaking timing information. - */ - (hash1: string, hash2: string): boolean - } - // @ts-ignore - import crand = rand - interface encrypt { - /** - * Encrypt encrypts "data" with the specified "key" (must be valid 32 char AES key). + * It sets only the Path and Args in the returned structure. * - * This method uses AES-256-GCM block cypher mode. - */ - (data: string|Array, key: string): string - } - interface decrypt { - /** - * Decrypt decrypts encrypted text with key (must be valid 32 chars AES key). + * If name contains no path separators, Command uses [LookPath] to + * resolve name to a complete path if possible. Otherwise it uses name + * directly as Path. * - * This method uses AES-256-GCM block cypher mode. - */ - (cipherText: string, key: string): string|Array - } - interface parseUnverifiedJWT { - /** - * ParseUnverifiedJWT parses JWT and returns its claims - * but DOES NOT verify the signature. + * The returned Cmd's Args field is constructed from the command name + * followed by the elements of arg, so arg should not include the + * command name itself. For example, Command("echo", "hello"). + * Args[0] is always name, not the possibly resolved Path. * - * It verifies only the exp, iat and nbf claims. + * On Windows, processes receive the whole command line as a single string + * and do their own parsing. Command combines and quotes Args into a command + * line string with an algorithm compatible with applications using + * CommandLineToArgvW (which is the most common way). Notable exceptions are + * msiexec.exe and cmd.exe (and thus, all batch files), which have a different + * unquoting algorithm. In these or other similar cases, you can do the + * quoting yourself and provide the full command line in SysProcAttr.CmdLine, + * leaving Args empty. */ - (token: string): jwt.MapClaims - } - interface parseJWT { - /** - * ParseJWT verifies and parses JWT and returns its claims. - */ - (token: string, verificationKey: string): jwt.MapClaims - } - interface newJWT { - /** - * NewJWT generates and returns new HS256 signed JWT. - */ - (payload: jwt.MapClaims, signingKey: string, duration: time.Duration): string - } - // @ts-ignore - import cryptoRand = rand - // @ts-ignore - import mathRand = rand - interface randomString { - /** - * RandomString generates a cryptographically random string with the specified length. - * - * The generated string matches [A-Za-z0-9]+ and it's transparent to URL-encoding. - */ - (length: number): string - } - interface randomStringWithAlphabet { - /** - * RandomStringWithAlphabet generates a cryptographically random string - * with the specified length and characters set. - * - * It panics if for some reason rand.Int returns a non-nil error. - */ - (length: number, alphabet: string): string - } - interface pseudorandomString { - /** - * PseudorandomString generates a pseudorandom string with the specified length. - * - * The generated string matches [A-Za-z0-9]+ and it's transparent to URL-encoding. - * - * For a cryptographically random string (but a little bit slower) use RandomString instead. - */ - (length: number): string - } - interface pseudorandomStringWithAlphabet { - /** - * PseudorandomStringWithAlphabet generates a pseudorandom string - * with the specified length and characters set. - * - * For a cryptographically random (but a little bit slower) use RandomStringWithAlphabet instead. - */ - (length: number, alphabet: string): string - } - interface randomStringByRegex { - /** - * RandomStringByRegex generates a random string matching the regex pattern. - * If optFlags is not set, fallbacks to [syntax.Perl]. - * - * NB! While the source of the randomness comes from [crypto/rand] this method - * is not recommended to be used on its own in critical secure contexts because - * the generated length could vary too much on the used pattern and may not be - * as secure as simply calling [security.RandomString]. - * If you still insist on using it for such purposes, consider at least - * a large enough minimum length for the generated string, e.g. `[a-z0-9]{30}`. - * - * This function is inspired by github.com/pipe01/revregexp, github.com/lucasjones/reggen and other similar packages. - */ - (pattern: string, ...optFlags: syntax.Flags[]): string + (name: string, ...arg: string[]): (Cmd) } } -namespace filesystem { - /** - * FileReader defines an interface for a file resource reader. - */ - interface FileReader { - [key:string]: any; - open(): io.ReadSeekCloser +/** + * Package template is a thin wrapper around the standard html/template + * and text/template packages that implements a convenient registry to + * load and cache templates on the fly concurrently. + * + * It was created to assist the JSVM plugin HTML rendering, but could be used in other Go code. + * + * Example: + * + * ``` + * registry := template.NewRegistry() + * + * html1, err := registry.LoadFiles( + * // the files set wil be parsed only once and then cached + * "layout.html", + * "content.html", + * ).Render(map[string]any{"name": "John"}) + * + * html2, err := registry.LoadFiles( + * // reuse the already parsed and cached files set + * "layout.html", + * "content.html", + * ).Render(map[string]any{"name": "Jane"}) + * ``` + */ +namespace template { + interface newRegistry { + /** + * NewRegistry creates and initializes a new templates registry with + * some defaults (eg. global "raw" template function for unescaped HTML). + * + * Use the Registry.Load* methods to load templates into the registry. + */ + (): (Registry) } /** - * File defines a single file [io.ReadSeekCloser] resource. + * Registry defines a templates registry that is safe to be used by multiple goroutines. * - * The file could be from a local path, multipart/form-data header, etc. + * Use the Registry.Load* methods to load templates into the registry. */ - interface File { - reader: FileReader - name: string - originalName: string - size: number + interface Registry { } - interface File { + interface Registry { /** - * AsMap implements [core.mapExtractor] and returns a value suitable - * to be used in an API rule expression. - */ - asMap(): _TygojaDict - } - interface newFileFromPath { - /** - * NewFileFromPath creates a new File instance from the provided local file path. - */ - (path: string): (File) - } - interface newFileFromBytes { - /** - * NewFileFromBytes creates a new File instance from the provided byte slice. - */ - (b: string|Array, name: string): (File) - } - interface newFileFromMultipart { - /** - * NewFileFromMultipart creates a new File from the provided multipart header. - */ - (mh: multipart.FileHeader): (File) - } - interface newFileFromURL { - /** - * NewFileFromURL creates a new File from the provided url by - * downloading the resource and load it as BytesReader. + * AddFuncs registers new global template functions. * - * Example + * The key of each map entry is the function name that will be used in the templates. + * If a function with the map entry name already exists it will be replaced with the new one. + * + * The value of each map entry is a function that must have either a + * single return value, or two return values of which the second has type error. + * + * Example: * * ``` - * ctx, cancel := context.WithTimeout(context.Background(), 30*time.Second) - * defer cancel() - * - * file, err := filesystem.NewFileFromURL(ctx, "https://example.com/image.png") + * r.AddFuncs(map[string]any{ + * "toUpper": func(str string) string { + * return strings.ToUppser(str) + * }, + * ... + * }) * ``` */ - (ctx: context.Context, url: string): (File) + addFuncs(funcs: _TygojaDict): (Registry) + } + interface Registry { + /** + * LoadFiles caches (if not already) the specified filenames set as a + * single template and returns a ready to use Renderer instance. + * + * There must be at least 1 filename specified. + */ + loadFiles(...filenames: string[]): (Renderer) + } + interface Registry { + /** + * LoadString caches (if not already) the specified inline string as a + * single template and returns a ready to use Renderer instance. + */ + loadString(text: string): (Renderer) + } + interface Registry { + /** + * LoadFS caches (if not already) the specified fs and globPatterns + * pair as single template and returns a ready to use Renderer instance. + * + * There must be at least 1 file matching the provided globPattern(s) + * (note that most file names serves as glob patterns matching themselves). + */ + loadFS(fsys: fs.FS, ...globPatterns: string[]): (Renderer) } /** - * MultipartReader defines a FileReader from [multipart.FileHeader]. + * Renderer defines a single parsed template. */ - interface MultipartReader { - header?: multipart.FileHeader + interface Renderer { } - interface MultipartReader { + interface Renderer { /** - * Open implements the [filesystem.FileReader] interface. + * Render executes the template with the specified data as the dot object + * and returns the result as plain string. */ - open(): io.ReadSeekCloser - } - /** - * PathReader defines a FileReader from a local file path. - */ - interface PathReader { - path: string - } - interface PathReader { - /** - * Open implements the [filesystem.FileReader] interface. - */ - open(): io.ReadSeekCloser - } - /** - * BytesReader defines a FileReader from bytes content. - */ - interface BytesReader { - bytes: string|Array - } - interface BytesReader { - /** - * Open implements the [filesystem.FileReader] interface. - */ - open(): io.ReadSeekCloser - } - type _sAaLkPz = bytes.Reader - interface bytesReadSeekCloser extends _sAaLkPz { - } - interface bytesReadSeekCloser { - /** - * Close implements the [io.ReadSeekCloser] interface. - */ - close(): void - } - /** - * openFuncAsReader defines a FileReader from a bare Open function. - */ - interface openFuncAsReader {(): io.ReadSeekCloser } - interface openFuncAsReader { - /** - * Open implements the [filesystem.FileReader] interface. - */ - open(): io.ReadSeekCloser - } - interface System { - } - interface newS3 { - /** - * NewS3 initializes a new S3 filesystem instance. - * - * NB! Make sure to call `Close()` after you are done working with it. - */ - (bucketName: string, region: string, endpoint: string, accessKey: string, secretKey: string, s3ForcePathStyle: boolean): (System) - } - interface newLocal { - /** - * NewLocal initializes a new local filesystem instance. - * - * NB! Make sure to call `Close()` after you are done working with it. - */ - (dirPath: string): (System) - } - interface System { - /** - * SetContext assigns the specified context to the current filesystem. - */ - setContext(ctx: context.Context): void - } - interface System { - /** - * Close releases any resources used for the related filesystem. - */ - close(): void - } - interface System { - /** - * Exists checks if file with fileKey path exists or not. - */ - exists(fileKey: string): boolean - } - interface System { - /** - * Attributes returns the attributes for the file with fileKey path. - * - * If the file doesn't exist it returns ErrNotFound. - */ - attributes(fileKey: string): (blob.Attributes) - } - interface System { - /** - * GetReader returns a file content reader for the given fileKey. - * - * NB! Make sure to call Close() on the file after you are done working with it. - * - * If the file doesn't exist returns ErrNotFound. - */ - getReader(fileKey: string): (blob.Reader) - } - interface System { - /** - * Deprecated: Please use GetReader(fileKey) instead. - */ - getFile(fileKey: string): (blob.Reader) - } - interface System { - /** - * GetReuploadableFile constructs a new reuploadable File value - * from the associated fileKey blob.Reader. - * - * If preserveName is false then the returned File.Name will have - * a new randomly generated suffix, otherwise it will reuse the original one. - * - * This method could be useful in case you want to clone an existing - * Record file and assign it to a new Record (e.g. in a Record duplicate action). - * - * If you simply want to copy an existing file to a new location you - * could check the Copy(srcKey, dstKey) method. - */ - getReuploadableFile(fileKey: string, preserveName: boolean): (File) - } - interface System { - /** - * Copy copies the file stored at srcKey to dstKey. - * - * If srcKey file doesn't exist, it returns ErrNotFound. - * - * If dstKey file already exists, it is overwritten. - */ - copy(srcKey: string, dstKey: string): void - } - interface System { - /** - * List returns a flat list with info for all files under the specified prefix. - */ - list(prefix: string): Array<(blob.ListObject | undefined)> - } - interface System { - /** - * Upload writes content into the fileKey location. - */ - upload(content: string|Array, fileKey: string): void - } - interface System { - /** - * UploadFile uploads the provided File to the fileKey location. - */ - uploadFile(file: File, fileKey: string): void - } - interface System { - /** - * UploadMultipart uploads the provided multipart file to the fileKey location. - */ - uploadMultipart(fh: multipart.FileHeader, fileKey: string): void - } - interface System { - /** - * Delete deletes stored file at fileKey location. - * - * If the file doesn't exist returns ErrNotFound. - */ - delete(fileKey: string): void - } - interface System { - /** - * DeletePrefix deletes everything starting with the specified prefix. - * - * The prefix could be subpath (ex. "/a/b/") or filename prefix (ex. "/a/b/file_"). - */ - deletePrefix(prefix: string): Array - } - interface System { - /** - * Checks if the provided dir prefix doesn't have any files. - * - * A trailing slash will be appended to a non-empty dir string argument - * to ensure that the checked prefix is a "directory". - * - * Returns "false" in case the has at least one file, otherwise - "true". - */ - isEmptyDir(dir: string): boolean - } - interface System { - /** - * Serve serves the file at fileKey location to an HTTP response. - * - * If the `download` query parameter is used the file will be always served for - * download no matter of its type (aka. with "Content-Disposition: attachment"). - * - * Internally this method uses [http.ServeContent] so Range requests, - * If-Match, If-Unmodified-Since, etc. headers are handled transparently. - */ - serve(res: http.ResponseWriter, req: http.Request, fileKey: string, name: string): void - } - interface System { - /** - * CreateThumb creates a new thumb image for the file at originalKey location. - * The new thumb file is stored at thumbKey location. - * - * thumbSize is in the format: - * - 0xH (eg. 0x100) - resize to H height preserving the aspect ratio - * - Wx0 (eg. 300x0) - resize to W width preserving the aspect ratio - * - WxH (eg. 300x100) - resize and crop to WxH viewbox (from center) - * - WxHt (eg. 300x100t) - resize and crop to WxH viewbox (from top) - * - WxHb (eg. 300x100b) - resize and crop to WxH viewbox (from bottom) - * - WxHf (eg. 300x100f) - fit inside a WxH viewbox (without cropping) - */ - createThumb(originalKey: string, thumbKey: string, thumbSize: string): void + render(data: any): string } } @@ -4111,14 +3918,14 @@ namespace dbx { /** * MssqlBuilder is the builder for SQL Server databases. */ - type _sQJHRcC = BaseBuilder - interface MssqlBuilder extends _sQJHRcC { + type _snIGhfU = BaseBuilder + interface MssqlBuilder extends _snIGhfU { } /** * MssqlQueryBuilder is the query builder for SQL Server databases. */ - type _sGJECFC = BaseQueryBuilder - interface MssqlQueryBuilder extends _sGJECFC { + type _sjHCovf = BaseQueryBuilder + interface MssqlQueryBuilder extends _sjHCovf { } interface newMssqlBuilder { /** @@ -4189,8 +3996,8 @@ namespace dbx { /** * MysqlBuilder is the builder for MySQL databases. */ - type _sZuXkOg = BaseBuilder - interface MysqlBuilder extends _sZuXkOg { + type _swFflHh = BaseBuilder + interface MysqlBuilder extends _swFflHh { } interface newMysqlBuilder { /** @@ -4265,14 +4072,14 @@ namespace dbx { /** * OciBuilder is the builder for Oracle databases. */ - type _sShSDwY = BaseBuilder - interface OciBuilder extends _sShSDwY { + type _swWgIXv = BaseBuilder + interface OciBuilder extends _swWgIXv { } /** * OciQueryBuilder is the query builder for Oracle databases. */ - type _sMUyoah = BaseQueryBuilder - interface OciQueryBuilder extends _sMUyoah { + type _sdeiqyP = BaseQueryBuilder + interface OciQueryBuilder extends _sdeiqyP { } interface newOciBuilder { /** @@ -4335,8 +4142,8 @@ namespace dbx { /** * PgsqlBuilder is the builder for PostgreSQL databases. */ - type _sFxkQEY = BaseBuilder - interface PgsqlBuilder extends _sFxkQEY { + type _sLjEWOf = BaseBuilder + interface PgsqlBuilder extends _sLjEWOf { } interface newPgsqlBuilder { /** @@ -4403,8 +4210,8 @@ namespace dbx { /** * SqliteQueryBuilder is the query builder for SQLite databases. */ - type _shNfEpI = BaseQueryBuilder - interface SqliteQueryBuilder extends _shNfEpI { + type _sMHLebw = BaseQueryBuilder + interface SqliteQueryBuilder extends _sMHLebw { } interface SqliteQueryBuilder { /** @@ -4425,8 +4232,8 @@ namespace dbx { /** * SqliteBuilder is the builder for SQLite databases. */ - type _svUfZqf = BaseBuilder - interface SqliteBuilder extends _svUfZqf { + type _sEpwqho = BaseBuilder + interface SqliteBuilder extends _sEpwqho { } interface newSqliteBuilder { /** @@ -4525,8 +4332,8 @@ namespace dbx { /** * StandardBuilder is the builder that is used by DB for an unknown driver. */ - type _sQfBEJK = BaseBuilder - interface StandardBuilder extends _sQfBEJK { + type _sSNzkZZ = BaseBuilder + interface StandardBuilder extends _sSNzkZZ { } interface newStandardBuilder { /** @@ -4592,8 +4399,8 @@ namespace dbx { * DB enhances sql.DB by providing a set of DB-agnostic query building methods. * DB allows easier query building and population of data into Go variables. */ - type _sroRYcU = Builder - interface DB extends _sroRYcU { + type _sbeJecG = Builder + interface DB extends _sbeJecG { /** * FieldMapper maps struct fields to DB columns. Defaults to DefaultFieldMapFunc. */ @@ -5423,8 +5230,8 @@ namespace dbx { * Rows enhances sql.Rows by providing additional data query methods. * Rows can be obtained by calling Query.Rows(). It is mainly used to populate data row by row. */ - type _sqbZjLz = sql.Rows - interface Rows extends _sqbZjLz { + type _szfuzfG = sql.Rows + interface Rows extends _szfuzfG { } interface Rows { /** @@ -5799,8 +5606,8 @@ namespace dbx { }): string } interface structInfo { } - type _sJHCYrg = structInfo - interface structValue extends _sJHCYrg { + type _sXCLSJx = structInfo + interface structValue extends _sXCLSJx { } interface fieldInfo { } @@ -5839,8 +5646,8 @@ namespace dbx { /** * Tx enhances sql.Tx with additional querying methods. */ - type _sViWdiX = Builder - interface Tx extends _sViWdiX { + type _sSVUUjW = Builder + interface Tx extends _sSVUUjW { } interface Tx { /** @@ -5856,129 +5663,427 @@ namespace dbx { } } -/** - * Package exec runs external commands. It wraps os.StartProcess to make it - * easier to remap stdin and stdout, connect I/O with pipes, and do other - * adjustments. - * - * Unlike the "system" library call from C and other languages, the - * os/exec package intentionally does not invoke the system shell and - * does not expand any glob patterns or handle other expansions, - * pipelines, or redirections typically done by shells. The package - * behaves more like C's "exec" family of functions. To expand glob - * patterns, either call the shell directly, taking care to escape any - * dangerous input, or use the [path/filepath] package's Glob function. - * To expand environment variables, use package os's ExpandEnv. - * - * Note that the examples in this package assume a Unix system. - * They may not run on Windows, and they do not run in the Go Playground - * used by go.dev and pkg.go.dev. - * - * # Executables in the current directory - * - * The functions [Command] and [LookPath] look for a program - * in the directories listed in the current path, following the - * conventions of the host operating system. - * Operating systems have for decades included the current - * directory in this search, sometimes implicitly and sometimes - * configured explicitly that way by default. - * Modern practice is that including the current directory - * is usually unexpected and often leads to security problems. - * - * To avoid those security problems, as of Go 1.19, this package will not resolve a program - * using an implicit or explicit path entry relative to the current directory. - * That is, if you run [LookPath]("go"), it will not successfully return - * ./go on Unix nor .\go.exe on Windows, no matter how the path is configured. - * Instead, if the usual path algorithms would result in that answer, - * these functions return an error err satisfying [errors.Is](err, [ErrDot]). - * - * For example, consider these two program snippets: - * - * ``` - * path, err := exec.LookPath("prog") - * if err != nil { - * log.Fatal(err) - * } - * use(path) - * ``` - * - * and - * - * ``` - * cmd := exec.Command("prog") - * if err := cmd.Run(); err != nil { - * log.Fatal(err) - * } - * ``` - * - * These will not find and run ./prog or .\prog.exe, - * no matter how the current path is configured. - * - * Code that always wants to run a program from the current directory - * can be rewritten to say "./prog" instead of "prog". - * - * Code that insists on including results from relative path entries - * can instead override the error using an errors.Is check: - * - * ``` - * path, err := exec.LookPath("prog") - * if errors.Is(err, exec.ErrDot) { - * err = nil - * } - * if err != nil { - * log.Fatal(err) - * } - * use(path) - * ``` - * - * and - * - * ``` - * cmd := exec.Command("prog") - * if errors.Is(cmd.Err, exec.ErrDot) { - * cmd.Err = nil - * } - * if err := cmd.Run(); err != nil { - * log.Fatal(err) - * } - * ``` - * - * Setting the environment variable GODEBUG=execerrdot=0 - * disables generation of ErrDot entirely, temporarily restoring the pre-Go 1.19 - * behavior for programs that are unable to apply more targeted fixes. - * A future version of Go may remove support for this variable. - * - * Before adding such overrides, make sure you understand the - * security implications of doing so. - * See https://go.dev/blog/path-security for more information. - */ -namespace exec { - interface command { +namespace security { + interface s256Challenge { /** - * Command returns the [Cmd] struct to execute the named program with - * the given arguments. + * S256Challenge creates base64 encoded sha256 challenge string derived from code. + * The padding of the result base64 string is stripped per [RFC 7636]. * - * It sets only the Path and Args in the returned structure. - * - * If name contains no path separators, Command uses [LookPath] to - * resolve name to a complete path if possible. Otherwise it uses name - * directly as Path. - * - * The returned Cmd's Args field is constructed from the command name - * followed by the elements of arg, so arg should not include the - * command name itself. For example, Command("echo", "hello"). - * Args[0] is always name, not the possibly resolved Path. - * - * On Windows, processes receive the whole command line as a single string - * and do their own parsing. Command combines and quotes Args into a command - * line string with an algorithm compatible with applications using - * CommandLineToArgvW (which is the most common way). Notable exceptions are - * msiexec.exe and cmd.exe (and thus, all batch files), which have a different - * unquoting algorithm. In these or other similar cases, you can do the - * quoting yourself and provide the full command line in SysProcAttr.CmdLine, - * leaving Args empty. + * [RFC 7636]: https://datatracker.ietf.org/doc/html/rfc7636#section-4.2 */ - (name: string, ...arg: string[]): (Cmd) + (code: string): string + } + interface md5 { + /** + * MD5 creates md5 hash from the provided plain text. + */ + (text: string): string + } + interface sha256 { + /** + * SHA256 creates sha256 hash as defined in FIPS 180-4 from the provided text. + */ + (text: string): string + } + interface sha512 { + /** + * SHA512 creates sha512 hash as defined in FIPS 180-4 from the provided text. + */ + (text: string): string + } + interface hs256 { + /** + * HS256 creates a HMAC hash with sha256 digest algorithm. + */ + (text: string, secret: string): string + } + interface hs512 { + /** + * HS512 creates a HMAC hash with sha512 digest algorithm. + */ + (text: string, secret: string): string + } + interface equal { + /** + * Equal compares two hash strings for equality without leaking timing information. + */ + (hash1: string, hash2: string): boolean + } + // @ts-ignore + import crand = rand + interface encrypt { + /** + * Encrypt encrypts "data" with the specified "key" (must be valid 32 char AES key). + * + * This method uses AES-256-GCM block cypher mode. + */ + (data: string|Array, key: string): string + } + interface decrypt { + /** + * Decrypt decrypts encrypted text with key (must be valid 32 chars AES key). + * + * This method uses AES-256-GCM block cypher mode. + */ + (cipherText: string, key: string): string|Array + } + interface parseUnverifiedJWT { + /** + * ParseUnverifiedJWT parses JWT and returns its claims + * but DOES NOT verify the signature. + * + * It verifies only the exp, iat and nbf claims. + */ + (token: string): jwt.MapClaims + } + interface parseJWT { + /** + * ParseJWT verifies and parses JWT and returns its claims. + */ + (token: string, verificationKey: string): jwt.MapClaims + } + interface newJWT { + /** + * NewJWT generates and returns new HS256 signed JWT. + */ + (payload: jwt.MapClaims, signingKey: string, duration: time.Duration): string + } + // @ts-ignore + import cryptoRand = rand + // @ts-ignore + import mathRand = rand + interface randomString { + /** + * RandomString generates a cryptographically random string with the specified length. + * + * The generated string matches [A-Za-z0-9]+ and it's transparent to URL-encoding. + */ + (length: number): string + } + interface randomStringWithAlphabet { + /** + * RandomStringWithAlphabet generates a cryptographically random string + * with the specified length and characters set. + * + * It panics if for some reason rand.Int returns a non-nil error. + */ + (length: number, alphabet: string): string + } + interface pseudorandomString { + /** + * PseudorandomString generates a pseudorandom string with the specified length. + * + * The generated string matches [A-Za-z0-9]+ and it's transparent to URL-encoding. + * + * For a cryptographically random string (but a little bit slower) use RandomString instead. + */ + (length: number): string + } + interface pseudorandomStringWithAlphabet { + /** + * PseudorandomStringWithAlphabet generates a pseudorandom string + * with the specified length and characters set. + * + * For a cryptographically random (but a little bit slower) use RandomStringWithAlphabet instead. + */ + (length: number, alphabet: string): string + } + interface randomStringByRegex { + /** + * RandomStringByRegex generates a random string matching the regex pattern. + * If optFlags is not set, fallbacks to [syntax.Perl]. + * + * NB! While the source of the randomness comes from [crypto/rand] this method + * is not recommended to be used on its own in critical secure contexts because + * the generated length could vary too much on the used pattern and may not be + * as secure as simply calling [security.RandomString]. + * If you still insist on using it for such purposes, consider at least + * a large enough minimum length for the generated string, e.g. `[a-z0-9]{30}`. + * + * This function is inspired by github.com/pipe01/revregexp, github.com/lucasjones/reggen and other similar packages. + */ + (pattern: string, ...optFlags: syntax.Flags[]): string + } +} + +namespace filesystem { + /** + * FileReader defines an interface for a file resource reader. + */ + interface FileReader { + [key:string]: any; + open(): io.ReadSeekCloser + } + /** + * File defines a single file [io.ReadSeekCloser] resource. + * + * The file could be from a local path, multipart/form-data header, etc. + */ + interface File { + reader: FileReader + name: string + originalName: string + size: number + } + interface File { + /** + * AsMap implements [core.mapExtractor] and returns a value suitable + * to be used in an API rule expression. + */ + asMap(): _TygojaDict + } + interface newFileFromPath { + /** + * NewFileFromPath creates a new File instance from the provided local file path. + */ + (path: string): (File) + } + interface newFileFromBytes { + /** + * NewFileFromBytes creates a new File instance from the provided byte slice. + */ + (b: string|Array, name: string): (File) + } + interface newFileFromMultipart { + /** + * NewFileFromMultipart creates a new File from the provided multipart header. + */ + (mh: multipart.FileHeader): (File) + } + interface newFileFromURL { + /** + * NewFileFromURL creates a new File from the provided url by + * downloading the resource and load it as BytesReader. + * + * Example + * + * ``` + * ctx, cancel := context.WithTimeout(context.Background(), 30*time.Second) + * defer cancel() + * + * file, err := filesystem.NewFileFromURL(ctx, "https://example.com/image.png") + * ``` + */ + (ctx: context.Context, url: string): (File) + } + /** + * MultipartReader defines a FileReader from [multipart.FileHeader]. + */ + interface MultipartReader { + header?: multipart.FileHeader + } + interface MultipartReader { + /** + * Open implements the [filesystem.FileReader] interface. + */ + open(): io.ReadSeekCloser + } + /** + * PathReader defines a FileReader from a local file path. + */ + interface PathReader { + path: string + } + interface PathReader { + /** + * Open implements the [filesystem.FileReader] interface. + */ + open(): io.ReadSeekCloser + } + /** + * BytesReader defines a FileReader from bytes content. + */ + interface BytesReader { + bytes: string|Array + } + interface BytesReader { + /** + * Open implements the [filesystem.FileReader] interface. + */ + open(): io.ReadSeekCloser + } + type _shFWJYs = bytes.Reader + interface bytesReadSeekCloser extends _shFWJYs { + } + interface bytesReadSeekCloser { + /** + * Close implements the [io.ReadSeekCloser] interface. + */ + close(): void + } + /** + * openFuncAsReader defines a FileReader from a bare Open function. + */ + interface openFuncAsReader {(): io.ReadSeekCloser } + interface openFuncAsReader { + /** + * Open implements the [filesystem.FileReader] interface. + */ + open(): io.ReadSeekCloser + } + interface System { + } + interface newS3 { + /** + * NewS3 initializes a new S3 filesystem instance. + * + * NB! Make sure to call `Close()` after you are done working with it. + */ + (bucketName: string, region: string, endpoint: string, accessKey: string, secretKey: string, s3ForcePathStyle: boolean): (System) + } + interface newLocal { + /** + * NewLocal initializes a new local filesystem instance. + * + * NB! Make sure to call `Close()` after you are done working with it. + */ + (dirPath: string): (System) + } + interface System { + /** + * SetContext assigns the specified context to the current filesystem. + */ + setContext(ctx: context.Context): void + } + interface System { + /** + * Close releases any resources used for the related filesystem. + */ + close(): void + } + interface System { + /** + * Exists checks if file with fileKey path exists or not. + */ + exists(fileKey: string): boolean + } + interface System { + /** + * Attributes returns the attributes for the file with fileKey path. + * + * If the file doesn't exist it returns ErrNotFound. + */ + attributes(fileKey: string): (blob.Attributes) + } + interface System { + /** + * GetReader returns a file content reader for the given fileKey. + * + * NB! Make sure to call Close() on the file after you are done working with it. + * + * If the file doesn't exist returns ErrNotFound. + */ + getReader(fileKey: string): (blob.Reader) + } + interface System { + /** + * Deprecated: Please use GetReader(fileKey) instead. + */ + getFile(fileKey: string): (blob.Reader) + } + interface System { + /** + * GetReuploadableFile constructs a new reuploadable File value + * from the associated fileKey blob.Reader. + * + * If preserveName is false then the returned File.Name will have + * a new randomly generated suffix, otherwise it will reuse the original one. + * + * This method could be useful in case you want to clone an existing + * Record file and assign it to a new Record (e.g. in a Record duplicate action). + * + * If you simply want to copy an existing file to a new location you + * could check the Copy(srcKey, dstKey) method. + */ + getReuploadableFile(fileKey: string, preserveName: boolean): (File) + } + interface System { + /** + * Copy copies the file stored at srcKey to dstKey. + * + * If srcKey file doesn't exist, it returns ErrNotFound. + * + * If dstKey file already exists, it is overwritten. + */ + copy(srcKey: string, dstKey: string): void + } + interface System { + /** + * List returns a flat list with info for all files under the specified prefix. + */ + list(prefix: string): Array<(blob.ListObject | undefined)> + } + interface System { + /** + * Upload writes content into the fileKey location. + */ + upload(content: string|Array, fileKey: string): void + } + interface System { + /** + * UploadFile uploads the provided File to the fileKey location. + */ + uploadFile(file: File, fileKey: string): void + } + interface System { + /** + * UploadMultipart uploads the provided multipart file to the fileKey location. + */ + uploadMultipart(fh: multipart.FileHeader, fileKey: string): void + } + interface System { + /** + * Delete deletes stored file at fileKey location. + * + * If the file doesn't exist returns ErrNotFound. + */ + delete(fileKey: string): void + } + interface System { + /** + * DeletePrefix deletes everything starting with the specified prefix. + * + * The prefix could be subpath (ex. "/a/b/") or filename prefix (ex. "/a/b/file_"). + */ + deletePrefix(prefix: string): Array + } + interface System { + /** + * Checks if the provided dir prefix doesn't have any files. + * + * A trailing slash will be appended to a non-empty dir string argument + * to ensure that the checked prefix is a "directory". + * + * Returns "false" in case the has at least one file, otherwise - "true". + */ + isEmptyDir(dir: string): boolean + } + interface System { + /** + * Serve serves the file at fileKey location to an HTTP response. + * + * If the `download` query parameter is used the file will be always served for + * download no matter of its type (aka. with "Content-Disposition: attachment"). + * + * Internally this method uses [http.ServeContent] so Range requests, + * If-Match, If-Unmodified-Since, etc. headers are handled transparently. + */ + serve(res: http.ResponseWriter, req: http.Request, fileKey: string, name: string): void + } + interface System { + /** + * CreateThumb creates a new thumb image for the file at originalKey location. + * The new thumb file is stored at thumbKey location. + * + * thumbSize is in the format: + * - 0xH (eg. 0x100) - resize to H height preserving the aspect ratio + * - Wx0 (eg. 300x0) - resize to W width preserving the aspect ratio + * - WxH (eg. 300x100) - resize and crop to WxH viewbox (from center) + * - WxHt (eg. 300x100t) - resize and crop to WxH viewbox (from top) + * - WxHb (eg. 300x100b) - resize and crop to WxH viewbox (from bottom) + * - WxHf (eg. 300x100f) - fit inside a WxH viewbox (without cropping) + */ + createThumb(originalKey: string, thumbKey: string, thumbSize: string): void } } @@ -7656,8 +7761,8 @@ namespace core { /** * AuthOrigin defines a Record proxy for working with the authOrigins collection. */ - type _sFhibnu = Record - interface AuthOrigin extends _sFhibnu { + type _sDsYzGn = Record + interface AuthOrigin extends _sDsYzGn { } interface newAuthOrigin { /** @@ -8403,8 +8508,8 @@ namespace core { * @todo experiment eventually replacing the rules *string with a struct? * @todo consider changing the Indexes field to a "getter" for the sqlite_master table? */ - type _sqEqGTK = BaseModel - interface baseCollection extends _sqEqGTK { + type _saSJqew = BaseModel + interface baseCollection extends _saSJqew { listRule?: string viewRule?: string createRule?: string @@ -8431,8 +8536,8 @@ namespace core { /** * Collection defines the table, fields and various options related to a set of records. */ - type _sZAwKRJ = baseCollection&collectionAuthOptions&collectionViewOptions - interface Collection extends _sZAwKRJ { + type _sjnatUq = baseCollection&collectionAuthOptions&collectionViewOptions + interface Collection extends _sjnatUq { } interface newCollection { /** @@ -9442,8 +9547,8 @@ namespace core { /** * RequestEvent defines the PocketBase router handler event. */ - type _sDUMQKG = router.Event - interface RequestEvent extends _sDUMQKG { + type _smnVmhK = router.Event + interface RequestEvent extends _smnVmhK { app: App auth?: Record } @@ -9503,8 +9608,8 @@ namespace core { */ clone(): (RequestInfo) } - type _sIlWAZG = hook.Event&RequestEvent - interface BatchRequestEvent extends _sIlWAZG { + type _sWFMCAQ = hook.Event&RequestEvent + interface BatchRequestEvent extends _sWFMCAQ { batch: Array<(InternalRequest | undefined)> } interface InternalRequest { @@ -9546,24 +9651,24 @@ namespace core { */ tags(): Array } - type _sllxsVY = hook.Event - interface BootstrapEvent extends _sllxsVY { + type _sXOrPFy = hook.Event + interface BootstrapEvent extends _sXOrPFy { app: App } - type _siYTRzD = hook.Event - interface TerminateEvent extends _siYTRzD { + type _sWeAblh = hook.Event + interface TerminateEvent extends _sWeAblh { app: App isRestart: boolean } - type _slSoNRX = hook.Event - interface BackupEvent extends _slSoNRX { + type _sLScowx = hook.Event + interface BackupEvent extends _sLScowx { app: App context: context.Context name: string // the name of the backup to create/restore. exclude: Array // list of dir entries to exclude from the backup create/restore. } - type _snmknMs = hook.Event - interface ServeEvent extends _snmknMs { + type _sgITmjv = hook.Event + interface ServeEvent extends _sgITmjv { app: App router?: router.Router server?: http.Server @@ -9610,31 +9715,31 @@ namespace core { */ fs: fs.FS } - type _saEgzoZ = hook.Event&RequestEvent - interface SettingsListRequestEvent extends _saEgzoZ { + type _siroWOi = hook.Event&RequestEvent + interface SettingsListRequestEvent extends _siroWOi { settings?: Settings } - type _skcJnnh = hook.Event&RequestEvent - interface SettingsUpdateRequestEvent extends _skcJnnh { + type _semKMJq = hook.Event&RequestEvent + interface SettingsUpdateRequestEvent extends _semKMJq { oldSettings?: Settings newSettings?: Settings } - type _sktOxlS = hook.Event - interface SettingsReloadEvent extends _sktOxlS { + type _sCrmZmR = hook.Event + interface SettingsReloadEvent extends _sCrmZmR { app: App } - type _sAfsZUf = hook.Event - interface MailerEvent extends _sAfsZUf { + type _slCWszp = hook.Event + interface MailerEvent extends _slCWszp { app: App mailer: mailer.Mailer message?: mailer.Message } - type _sJPsfSQ = MailerEvent&baseRecordEventData - interface MailerRecordEvent extends _sJPsfSQ { + type _sJpGSgU = MailerEvent&baseRecordEventData + interface MailerRecordEvent extends _sJpGSgU { meta: _TygojaDict } - type _sLtYBpZ = hook.Event&baseModelEventData - interface ModelEvent extends _sLtYBpZ { + type _sQIKDLN = hook.Event&baseModelEventData + interface ModelEvent extends _sQIKDLN { app: App context: context.Context /** @@ -9646,12 +9751,12 @@ namespace core { */ type: string } - type _spYihGL = ModelEvent - interface ModelErrorEvent extends _spYihGL { + type _sSuWzfC = ModelEvent + interface ModelErrorEvent extends _sSuWzfC { error: Error } - type _sJyVqdW = hook.Event&baseRecordEventData - interface RecordEvent extends _sJyVqdW { + type _sxZXxtH = hook.Event&baseRecordEventData + interface RecordEvent extends _sxZXxtH { app: App context: context.Context /** @@ -9663,12 +9768,12 @@ namespace core { */ type: string } - type _sxzaoqt = RecordEvent - interface RecordErrorEvent extends _sxzaoqt { + type _soehWmo = RecordEvent + interface RecordErrorEvent extends _soehWmo { error: Error } - type _sILzqrO = hook.Event&baseCollectionEventData - interface CollectionEvent extends _sILzqrO { + type _sQumdEr = hook.Event&baseCollectionEventData + interface CollectionEvent extends _sQumdEr { app: App context: context.Context /** @@ -9680,16 +9785,16 @@ namespace core { */ type: string } - type _sYgTUtk = CollectionEvent - interface CollectionErrorEvent extends _sYgTUtk { + type _sUANPEO = CollectionEvent + interface CollectionErrorEvent extends _sUANPEO { error: Error } - type _sggtVlP = hook.Event&RequestEvent&baseRecordEventData - interface FileTokenRequestEvent extends _sggtVlP { + type _sfflLvc = hook.Event&RequestEvent&baseRecordEventData + interface FileTokenRequestEvent extends _sfflLvc { token: string } - type _sRdQwKZ = hook.Event&RequestEvent&baseCollectionEventData - interface FileDownloadRequestEvent extends _sRdQwKZ { + type _sZjIYBc = hook.Event&RequestEvent&baseCollectionEventData + interface FileDownloadRequestEvent extends _sZjIYBc { record?: Record fileField?: FileField servedPath: string @@ -9703,80 +9808,97 @@ namespace core { */ thumbError: Error } - type _savPzvO = hook.Event&RequestEvent - interface CollectionsListRequestEvent extends _savPzvO { + type _sEKtjbu = hook.Event&RequestEvent + interface CollectionsListRequestEvent extends _sEKtjbu { collections: Array<(Collection | undefined)> result?: search.Result } - type _svFQGPQ = hook.Event&RequestEvent - interface CollectionsImportRequestEvent extends _svFQGPQ { + type _sseKrNj = hook.Event&RequestEvent + interface CollectionsImportRequestEvent extends _sseKrNj { collectionsData: Array<_TygojaDict> deleteMissing: boolean } - type _sbQDXPL = hook.Event&RequestEvent&baseCollectionEventData - interface CollectionRequestEvent extends _sbQDXPL { + type _sOaeClz = hook.Event&RequestEvent&baseCollectionEventData + interface CollectionRequestEvent extends _sOaeClz { } - type _sSACWTW = hook.Event&RequestEvent - interface RealtimeConnectRequestEvent extends _sSACWTW { + type _sLvENGB = hook.Event&RequestEvent + interface RealtimeConnectRequestEvent extends _sLvENGB { client: subscriptions.Client /** - * note: modifying it after the connect has no effect + * IdleTimeout specifies the max duration to wait for a new message + * before closing the connection. + * + * Modifying the value after the connection has been established has no effect. + * + * Defaults to 5 minutes. */ idleTimeout: time.Duration + /** + * MaxTimeout specifies the maximum duration a realtime connection + * can remain open (including even if there are ongoing messages). + * + * Once the specified duration expires, the current connection will + * be terminated, until a client reconnect is issued (if the client is still active). + * + * Modifying the value after the connection has been established has no effect. + * + * Defaults to 30 minutes. + */ + maxTimeout: time.Duration } - type _sWVUFvi = hook.Event&RequestEvent - interface RealtimeMessageEvent extends _sWVUFvi { + type _sUHpcIW = hook.Event&RequestEvent + interface RealtimeMessageEvent extends _sUHpcIW { client: subscriptions.Client message?: subscriptions.Message } - type _stRwAcg = hook.Event&RequestEvent - interface RealtimeSubscribeRequestEvent extends _stRwAcg { + type _ssJaghF = hook.Event&RequestEvent + interface RealtimeSubscribeRequestEvent extends _ssJaghF { client: subscriptions.Client subscriptions: Array } - type _shPPJqe = hook.Event&RequestEvent&baseCollectionEventData - interface RecordsListRequestEvent extends _shPPJqe { + type _sVQwCst = hook.Event&RequestEvent&baseCollectionEventData + interface RecordsListRequestEvent extends _sVQwCst { /** * @todo consider removing and maybe add as generic to the search.Result? */ records: Array<(Record | undefined)> result?: search.Result } - type _sOKuRVT = hook.Event&RequestEvent&baseCollectionEventData - interface RecordRequestEvent extends _sOKuRVT { + type _stZqtCw = hook.Event&RequestEvent&baseCollectionEventData + interface RecordRequestEvent extends _stZqtCw { record?: Record } - type _sMqJdln = hook.Event&baseRecordEventData - interface RecordEnrichEvent extends _sMqJdln { + type _sgfBLoa = hook.Event&baseRecordEventData + interface RecordEnrichEvent extends _sgfBLoa { app: App requestInfo?: RequestInfo } - type _srZAuxO = hook.Event&RequestEvent&baseCollectionEventData - interface RecordCreateOTPRequestEvent extends _srZAuxO { + type _sNHQqnw = hook.Event&RequestEvent&baseCollectionEventData + interface RecordCreateOTPRequestEvent extends _sNHQqnw { record?: Record password: string } - type _sQqnYGa = hook.Event&RequestEvent&baseCollectionEventData - interface RecordAuthWithOTPRequestEvent extends _sQqnYGa { + type _sYQutrh = hook.Event&RequestEvent&baseCollectionEventData + interface RecordAuthWithOTPRequestEvent extends _sYQutrh { record?: Record otp?: OTP } - type _szPHOHR = hook.Event&RequestEvent&baseCollectionEventData - interface RecordAuthRequestEvent extends _szPHOHR { + type _sNPNnwX = hook.Event&RequestEvent&baseCollectionEventData + interface RecordAuthRequestEvent extends _sNPNnwX { record?: Record token: string meta: any authMethod: string } - type _sAjAHwX = hook.Event&RequestEvent&baseCollectionEventData - interface RecordAuthWithPasswordRequestEvent extends _sAjAHwX { + type _sQrmeKz = hook.Event&RequestEvent&baseCollectionEventData + interface RecordAuthWithPasswordRequestEvent extends _sQrmeKz { record?: Record identity: string identityField: string password: string } - type _stiSYsx = hook.Event&RequestEvent&baseCollectionEventData - interface RecordAuthWithOAuth2RequestEvent extends _stiSYsx { + type _sOTtWeh = hook.Event&RequestEvent&baseCollectionEventData + interface RecordAuthWithOAuth2RequestEvent extends _sOTtWeh { providerName: string providerClient: auth.Provider record?: Record @@ -9784,41 +9906,41 @@ namespace core { createData: _TygojaDict isNewRecord: boolean } - type _sbkZZvx = hook.Event&RequestEvent&baseCollectionEventData - interface RecordAuthRefreshRequestEvent extends _sbkZZvx { + type _sWKIovA = hook.Event&RequestEvent&baseCollectionEventData + interface RecordAuthRefreshRequestEvent extends _sWKIovA { record?: Record } - type _srkJqDD = hook.Event&RequestEvent&baseCollectionEventData - interface RecordRequestPasswordResetRequestEvent extends _srkJqDD { + type _ssbyNua = hook.Event&RequestEvent&baseCollectionEventData + interface RecordRequestPasswordResetRequestEvent extends _ssbyNua { record?: Record } - type _sNxnXlE = hook.Event&RequestEvent&baseCollectionEventData - interface RecordConfirmPasswordResetRequestEvent extends _sNxnXlE { + type _sRAzmKa = hook.Event&RequestEvent&baseCollectionEventData + interface RecordConfirmPasswordResetRequestEvent extends _sRAzmKa { record?: Record } - type _sTegxzO = hook.Event&RequestEvent&baseCollectionEventData - interface RecordRequestVerificationRequestEvent extends _sTegxzO { + type _sknCDNB = hook.Event&RequestEvent&baseCollectionEventData + interface RecordRequestVerificationRequestEvent extends _sknCDNB { record?: Record } - type _sFfqESZ = hook.Event&RequestEvent&baseCollectionEventData - interface RecordConfirmVerificationRequestEvent extends _sFfqESZ { + type _soritSV = hook.Event&RequestEvent&baseCollectionEventData + interface RecordConfirmVerificationRequestEvent extends _soritSV { record?: Record } - type _soLWioo = hook.Event&RequestEvent&baseCollectionEventData - interface RecordRequestEmailChangeRequestEvent extends _soLWioo { + type _snPjaLh = hook.Event&RequestEvent&baseCollectionEventData + interface RecordRequestEmailChangeRequestEvent extends _snPjaLh { record?: Record newEmail: string } - type _syhHgdX = hook.Event&RequestEvent&baseCollectionEventData - interface RecordConfirmEmailChangeRequestEvent extends _syhHgdX { + type _sLqnGij = hook.Event&RequestEvent&baseCollectionEventData + interface RecordConfirmEmailChangeRequestEvent extends _sLqnGij { record?: Record newEmail: string } /** * ExternalAuth defines a Record proxy for working with the externalAuths collection. */ - type _siLHNEU = Record - interface ExternalAuth extends _siLHNEU { + type _sLpIhOz = Record + interface ExternalAuth extends _sLpIhOz { } interface newExternalAuth { /** @@ -12361,8 +12483,8 @@ namespace core { interface onlyFieldType { type: string } - type _slSTDVS = Field - interface fieldWithType extends _slSTDVS { + type _sZFZDPR = Field + interface fieldWithType extends _sZFZDPR { type: string } interface fieldWithType { @@ -12394,8 +12516,8 @@ namespace core { */ scan(value: any): void } - type _sLbjhYc = BaseModel - interface Log extends _sLbjhYc { + type _ssTQrBX = BaseModel + interface Log extends _ssTQrBX { created: types.DateTime data: types.JSONMap message: string @@ -12441,8 +12563,8 @@ namespace core { /** * MFA defines a Record proxy for working with the mfas collection. */ - type _swiwFAm = Record - interface MFA extends _swiwFAm { + type _sWgZOov = Record + interface MFA extends _sWgZOov { } interface newMFA { /** @@ -12664,8 +12786,8 @@ namespace core { /** * OTP defines a Record proxy for working with the otps collection. */ - type _sxgnYXc = Record - interface OTP extends _sxgnYXc { + type _sDxlCVQ = Record + interface OTP extends _sDxlCVQ { } interface newOTP { /** @@ -12901,8 +13023,8 @@ namespace core { } interface runner { } - type _svgJfxo = BaseModel - interface Record extends _svgJfxo { + type _sSJFEzD = BaseModel + interface Record extends _sSJFEzD { } interface newRecord { /** @@ -13377,8 +13499,8 @@ namespace core { * BaseRecordProxy implements the [RecordProxy] interface and it is intended * to be used as embed to custom user provided Record proxy structs. */ - type _sTqTkFe = Record - interface BaseRecordProxy extends _sTqTkFe { + type _sWDqnrq = Record + interface BaseRecordProxy extends _sWDqnrq { } interface BaseRecordProxy { /** @@ -13632,8 +13754,8 @@ namespace core { /** * Settings defines the PocketBase app settings. */ - type _sGQlqtv = settings - interface Settings extends _sGQlqtv { + type _sSaqNsh = settings + interface Settings extends _sSaqNsh { } interface Settings { /** @@ -13953,8 +14075,8 @@ namespace core { */ string(): string } - type _sCyoiYb = BaseModel - interface Param extends _sCyoiYb { + type _sDqdAUN = BaseModel + interface Param extends _sDqdAUN { created: types.DateTime updated: types.DateTime value: types.JSONRaw @@ -14495,8 +14617,8 @@ namespace apis { */ (limitBytes: number): (hook.Handler) } - type _sNjamJg = io.ReadCloser - interface limitedReader extends _sNjamJg { + type _sQnzbYU = io.ReadCloser + interface limitedReader extends _sQnzbYU { } interface limitedReader { read(b: string|Array): number @@ -14650,8 +14772,8 @@ namespace apis { */ (config: GzipConfig): (hook.Handler) } - type _surFfAH = http.ResponseWriter&io.Writer - interface gzipResponseWriter extends _surFfAH { + type _sTQOySj = http.ResponseWriter&io.Writer + interface gzipResponseWriter extends _sTQOySj { } interface gzipResponseWriter { writeHeader(code: number): void @@ -14671,16 +14793,16 @@ namespace apis { interface gzipResponseWriter { unwrap(): http.ResponseWriter } - type _smwnvfd = sync.RWMutex - interface rateLimiter extends _smwnvfd { + type _sFNPXVh = sync.RWMutex + interface rateLimiter extends _sFNPXVh { } /** * @todo evaluate swiching to sliding window with approximation counter similar to Cloudflare. * * rateClient implements fixed window rate limit strategy. */ - type _svvEryT = sync.Mutex - interface rateClient extends _svvEryT { + type _skkfzbu = sync.Mutex + interface rateClient extends _skkfzbu { } interface realtimeSubscribeForm { clientId: string @@ -14926,8 +15048,8 @@ namespace pocketbase { * It implements [CoreApp] via embedding and all of the app interface methods * could be accessed directly through the instance (eg. PocketBase.DataDir()). */ - type _smJbAsh = CoreApp - interface PocketBase extends _smJbAsh { + type _svZVkkM = CoreApp + interface PocketBase extends _svZVkkM { /** * RootCmd is the main console command */ @@ -15012,111 +15134,6 @@ namespace pocketbase { } } -/** - * Package template is a thin wrapper around the standard html/template - * and text/template packages that implements a convenient registry to - * load and cache templates on the fly concurrently. - * - * It was created to assist the JSVM plugin HTML rendering, but could be used in other Go code. - * - * Example: - * - * ``` - * registry := template.NewRegistry() - * - * html1, err := registry.LoadFiles( - * // the files set wil be parsed only once and then cached - * "layout.html", - * "content.html", - * ).Render(map[string]any{"name": "John"}) - * - * html2, err := registry.LoadFiles( - * // reuse the already parsed and cached files set - * "layout.html", - * "content.html", - * ).Render(map[string]any{"name": "Jane"}) - * ``` - */ -namespace template { - interface newRegistry { - /** - * NewRegistry creates and initializes a new templates registry with - * some defaults (eg. global "raw" template function for unescaped HTML). - * - * Use the Registry.Load* methods to load templates into the registry. - */ - (): (Registry) - } - /** - * Registry defines a templates registry that is safe to be used by multiple goroutines. - * - * Use the Registry.Load* methods to load templates into the registry. - */ - interface Registry { - } - interface Registry { - /** - * AddFuncs registers new global template functions. - * - * The key of each map entry is the function name that will be used in the templates. - * If a function with the map entry name already exists it will be replaced with the new one. - * - * The value of each map entry is a function that must have either a - * single return value, or two return values of which the second has type error. - * - * Example: - * - * ``` - * r.AddFuncs(map[string]any{ - * "toUpper": func(str string) string { - * return strings.ToUppser(str) - * }, - * ... - * }) - * ``` - */ - addFuncs(funcs: _TygojaDict): (Registry) - } - interface Registry { - /** - * LoadFiles caches (if not already) the specified filenames set as a - * single template and returns a ready to use Renderer instance. - * - * There must be at least 1 filename specified. - */ - loadFiles(...filenames: string[]): (Renderer) - } - interface Registry { - /** - * LoadString caches (if not already) the specified inline string as a - * single template and returns a ready to use Renderer instance. - */ - loadString(text: string): (Renderer) - } - interface Registry { - /** - * LoadFS caches (if not already) the specified fs and globPatterns - * pair as single template and returns a ready to use Renderer instance. - * - * There must be at least 1 file matching the provided globPattern(s) - * (note that most file names serves as glob patterns matching themselves). - */ - loadFS(fsys: fs.FS, ...globPatterns: string[]): (Renderer) - } - /** - * Renderer defines a single parsed template. - */ - interface Renderer { - } - interface Renderer { - /** - * Render executes the template with the specified data as the dot object - * and returns the result as plain string. - */ - render(data: any): string - } -} - /** * Package sync provides basic synchronization primitives such as mutual * exclusion locks. Other than the [Once] and [WaitGroup] types, most are intended @@ -15268,6 +15285,184 @@ namespace sync { } } +/** + * Package io provides basic interfaces to I/O primitives. + * Its primary job is to wrap existing implementations of such primitives, + * such as those in package os, into shared public interfaces that + * abstract the functionality, plus some other related primitives. + * + * Because these interfaces and primitives wrap lower-level operations with + * various implementations, unless otherwise informed clients should not + * assume they are safe for parallel execution. + */ +namespace io { + /** + * Reader is the interface that wraps the basic Read method. + * + * Read reads up to len(p) bytes into p. It returns the number of bytes + * read (0 <= n <= len(p)) and any error encountered. Even if Read + * returns n < len(p), it may use all of p as scratch space during the call. + * If some data is available but not len(p) bytes, Read conventionally + * returns what is available instead of waiting for more. + * + * When Read encounters an error or end-of-file condition after + * successfully reading n > 0 bytes, it returns the number of + * bytes read. It may return the (non-nil) error from the same call + * or return the error (and n == 0) from a subsequent call. + * An instance of this general case is that a Reader returning + * a non-zero number of bytes at the end of the input stream may + * return either err == EOF or err == nil. The next Read should + * return 0, EOF. + * + * Callers should always process the n > 0 bytes returned before + * considering the error err. Doing so correctly handles I/O errors + * that happen after reading some bytes and also both of the + * allowed EOF behaviors. + * + * If len(p) == 0, Read should always return n == 0. It may return a + * non-nil error if some error condition is known, such as EOF. + * + * Implementations of Read are discouraged from returning a + * zero byte count with a nil error, except when len(p) == 0. + * Callers should treat a return of 0 and nil as indicating that + * nothing happened; in particular it does not indicate EOF. + * + * Implementations must not retain p. + */ + interface Reader { + [key:string]: any; + read(p: string|Array): number + } + /** + * Writer is the interface that wraps the basic Write method. + * + * Write writes len(p) bytes from p to the underlying data stream. + * It returns the number of bytes written from p (0 <= n <= len(p)) + * and any error encountered that caused the write to stop early. + * Write must return a non-nil error if it returns n < len(p). + * Write must not modify the slice data, even temporarily. + * + * Implementations must not retain p. + */ + interface Writer { + [key:string]: any; + write(p: string|Array): number + } + /** + * ReadCloser is the interface that groups the basic Read and Close methods. + */ + interface ReadCloser { + [key:string]: any; + } + /** + * ReadSeekCloser is the interface that groups the basic Read, Seek and Close + * methods. + */ + interface ReadSeekCloser { + [key:string]: any; + } +} + +/** + * Package bytes implements functions for the manipulation of byte slices. + * It is analogous to the facilities of the [strings] package. + */ +namespace bytes { + /** + * A Reader implements the [io.Reader], [io.ReaderAt], [io.WriterTo], [io.Seeker], + * [io.ByteScanner], and [io.RuneScanner] interfaces by reading from + * a byte slice. + * Unlike a [Buffer], a Reader is read-only and supports seeking. + * The zero value for Reader operates like a Reader of an empty slice. + */ + interface Reader { + } + interface Reader { + /** + * Len returns the number of bytes of the unread portion of the + * slice. + */ + len(): number + } + interface Reader { + /** + * Size returns the original length of the underlying byte slice. + * Size is the number of bytes available for reading via [Reader.ReadAt]. + * The result is unaffected by any method calls except [Reader.Reset]. + */ + size(): number + } + interface Reader { + /** + * Read implements the [io.Reader] interface. + */ + read(b: string|Array): number + } + interface Reader { + /** + * ReadAt implements the [io.ReaderAt] interface. + */ + readAt(b: string|Array, off: number): number + } + interface Reader { + /** + * ReadByte implements the [io.ByteReader] interface. + */ + readByte(): number + } + interface Reader { + /** + * UnreadByte complements [Reader.ReadByte] in implementing the [io.ByteScanner] interface. + */ + unreadByte(): void + } + interface Reader { + /** + * ReadRune implements the [io.RuneReader] interface. + */ + readRune(): [number, number] + } + interface Reader { + /** + * UnreadRune complements [Reader.ReadRune] in implementing the [io.RuneScanner] interface. + */ + unreadRune(): void + } + interface Reader { + /** + * Seek implements the [io.Seeker] interface. + */ + seek(offset: number, whence: number): number + } + interface Reader { + /** + * WriteTo implements the [io.WriterTo] interface. + */ + writeTo(w: io.Writer): number + } + interface Reader { + /** + * Reset resets the [Reader] to be reading from b. + */ + reset(b: string|Array): void + } +} + +/** + * Package bufio implements buffered I/O. It wraps an io.Reader or io.Writer + * object, creating another object (Reader or Writer) that also implements + * the interface but provides buffering and some help for textual I/O. + */ +namespace bufio { + /** + * ReadWriter stores pointers to a [Reader] and a [Writer]. + * It implements [io.ReadWriter]. + */ + type _sQwNHDI = Reader&Writer + interface ReadWriter extends _sQwNHDI { + } +} + /** * Package syscall contains an interface to the low-level operating system * primitives. The details vary depending on the underlying system, and @@ -16185,84 +16380,6 @@ namespace context { } } -/** - * Package io provides basic interfaces to I/O primitives. - * Its primary job is to wrap existing implementations of such primitives, - * such as those in package os, into shared public interfaces that - * abstract the functionality, plus some other related primitives. - * - * Because these interfaces and primitives wrap lower-level operations with - * various implementations, unless otherwise informed clients should not - * assume they are safe for parallel execution. - */ -namespace io { - /** - * Reader is the interface that wraps the basic Read method. - * - * Read reads up to len(p) bytes into p. It returns the number of bytes - * read (0 <= n <= len(p)) and any error encountered. Even if Read - * returns n < len(p), it may use all of p as scratch space during the call. - * If some data is available but not len(p) bytes, Read conventionally - * returns what is available instead of waiting for more. - * - * When Read encounters an error or end-of-file condition after - * successfully reading n > 0 bytes, it returns the number of - * bytes read. It may return the (non-nil) error from the same call - * or return the error (and n == 0) from a subsequent call. - * An instance of this general case is that a Reader returning - * a non-zero number of bytes at the end of the input stream may - * return either err == EOF or err == nil. The next Read should - * return 0, EOF. - * - * Callers should always process the n > 0 bytes returned before - * considering the error err. Doing so correctly handles I/O errors - * that happen after reading some bytes and also both of the - * allowed EOF behaviors. - * - * If len(p) == 0, Read should always return n == 0. It may return a - * non-nil error if some error condition is known, such as EOF. - * - * Implementations of Read are discouraged from returning a - * zero byte count with a nil error, except when len(p) == 0. - * Callers should treat a return of 0 and nil as indicating that - * nothing happened; in particular it does not indicate EOF. - * - * Implementations must not retain p. - */ - interface Reader { - [key:string]: any; - read(p: string|Array): number - } - /** - * Writer is the interface that wraps the basic Write method. - * - * Write writes len(p) bytes from p to the underlying data stream. - * It returns the number of bytes written from p (0 <= n <= len(p)) - * and any error encountered that caused the write to stop early. - * Write must return a non-nil error if it returns n < len(p). - * Write must not modify the slice data, even temporarily. - * - * Implementations must not retain p. - */ - interface Writer { - [key:string]: any; - write(p: string|Array): number - } - /** - * ReadCloser is the interface that groups the basic Read and Close methods. - */ - interface ReadCloser { - [key:string]: any; - } - /** - * ReadSeekCloser is the interface that groups the basic Read, Seek and Close - * methods. - */ - interface ReadSeekCloser { - [key:string]: any; - } -} - /** * Package fs defines basic interfaces to a file system. * A file system can be provided by the host operating system @@ -16464,875 +16581,6 @@ namespace fs { interface WalkDirFunc {(path: string, d: DirEntry, err: Error): void } } -/** - * Package net provides a portable interface for network I/O, including - * TCP/IP, UDP, domain name resolution, and Unix domain sockets. - * - * Although the package provides access to low-level networking - * primitives, most clients will need only the basic interface provided - * by the [Dial], [Listen], and Accept functions and the associated - * [Conn] and [Listener] interfaces. The crypto/tls package uses - * the same interfaces and similar Dial and Listen functions. - * - * The Dial function connects to a server: - * - * ``` - * conn, err := net.Dial("tcp", "golang.org:80") - * if err != nil { - * // handle error - * } - * fmt.Fprintf(conn, "GET / HTTP/1.0\r\n\r\n") - * status, err := bufio.NewReader(conn).ReadString('\n') - * // ... - * ``` - * - * The Listen function creates servers: - * - * ``` - * ln, err := net.Listen("tcp", ":8080") - * if err != nil { - * // handle error - * } - * for { - * conn, err := ln.Accept() - * if err != nil { - * // handle error - * } - * go handleConnection(conn) - * } - * ``` - * - * # Name Resolution - * - * The method for resolving domain names, whether indirectly with functions like Dial - * or directly with functions like [LookupHost] and [LookupAddr], varies by operating system. - * - * On Unix systems, the resolver has two options for resolving names. - * It can use a pure Go resolver that sends DNS requests directly to the servers - * listed in /etc/resolv.conf, or it can use a cgo-based resolver that calls C - * library routines such as getaddrinfo and getnameinfo. - * - * On Unix the pure Go resolver is preferred over the cgo resolver, because a blocked DNS - * request consumes only a goroutine, while a blocked C call consumes an operating system thread. - * When cgo is available, the cgo-based resolver is used instead under a variety of - * conditions: on systems that do not let programs make direct DNS requests (OS X), - * when the LOCALDOMAIN environment variable is present (even if empty), - * when the RES_OPTIONS or HOSTALIASES environment variable is non-empty, - * when the ASR_CONFIG environment variable is non-empty (OpenBSD only), - * when /etc/resolv.conf or /etc/nsswitch.conf specify the use of features that the - * Go resolver does not implement. - * - * On all systems (except Plan 9), when the cgo resolver is being used - * this package applies a concurrent cgo lookup limit to prevent the system - * from running out of system threads. Currently, it is limited to 500 concurrent lookups. - * - * The resolver decision can be overridden by setting the netdns value of the - * GODEBUG environment variable (see package runtime) to go or cgo, as in: - * - * ``` - * export GODEBUG=netdns=go # force pure Go resolver - * export GODEBUG=netdns=cgo # force native resolver (cgo, win32) - * ``` - * - * The decision can also be forced while building the Go source tree - * by setting the netgo or netcgo build tag. - * The netgo build tag disables entirely the use of the native (CGO) resolver, - * meaning the Go resolver is the only one that can be used. - * With the netcgo build tag the native and the pure Go resolver are compiled into the binary, - * but the native (CGO) resolver is preferred over the Go resolver. - * With netcgo, the Go resolver can still be forced at runtime with GODEBUG=netdns=go. - * - * A numeric netdns setting, as in GODEBUG=netdns=1, causes the resolver - * to print debugging information about its decisions. - * To force a particular resolver while also printing debugging information, - * join the two settings by a plus sign, as in GODEBUG=netdns=go+1. - * - * The Go resolver will send an EDNS0 additional header with a DNS request, - * to signal a willingness to accept a larger DNS packet size. - * This can reportedly cause sporadic failures with the DNS server run - * by some modems and routers. Setting GODEBUG=netedns0=0 will disable - * sending the additional header. - * - * On macOS, if Go code that uses the net package is built with - * -buildmode=c-archive, linking the resulting archive into a C program - * requires passing -lresolv when linking the C code. - * - * On Plan 9, the resolver always accesses /net/cs and /net/dns. - * - * On Windows, in Go 1.18.x and earlier, the resolver always used C - * library functions, such as GetAddrInfo and DnsQuery. - */ -namespace net { - /** - * Conn is a generic stream-oriented network connection. - * - * Multiple goroutines may invoke methods on a Conn simultaneously. - */ - interface Conn { - [key:string]: any; - /** - * Read reads data from the connection. - * Read can be made to time out and return an error after a fixed - * time limit; see SetDeadline and SetReadDeadline. - */ - read(b: string|Array): number - /** - * Write writes data to the connection. - * Write can be made to time out and return an error after a fixed - * time limit; see SetDeadline and SetWriteDeadline. - */ - write(b: string|Array): number - /** - * Close closes the connection. - * Any blocked Read or Write operations will be unblocked and return errors. - * Close may or may not block until any buffered data is sent; - * for TCP connections see [*TCPConn.SetLinger]. - */ - close(): void - /** - * LocalAddr returns the local network address, if known. - */ - localAddr(): Addr - /** - * RemoteAddr returns the remote network address, if known. - */ - remoteAddr(): Addr - /** - * SetDeadline sets the read and write deadlines associated - * with the connection. It is equivalent to calling both - * SetReadDeadline and SetWriteDeadline. - * - * A deadline is an absolute time after which I/O operations - * fail instead of blocking. The deadline applies to all future - * and pending I/O, not just the immediately following call to - * Read or Write. After a deadline has been exceeded, the - * connection can be refreshed by setting a deadline in the future. - * - * If the deadline is exceeded a call to Read or Write or to other - * I/O methods will return an error that wraps os.ErrDeadlineExceeded. - * This can be tested using errors.Is(err, os.ErrDeadlineExceeded). - * The error's Timeout method will return true, but note that there - * are other possible errors for which the Timeout method will - * return true even if the deadline has not been exceeded. - * - * An idle timeout can be implemented by repeatedly extending - * the deadline after successful Read or Write calls. - * - * A zero value for t means I/O operations will not time out. - */ - setDeadline(t: time.Time): void - /** - * SetReadDeadline sets the deadline for future Read calls - * and any currently-blocked Read call. - * A zero value for t means Read will not time out. - */ - setReadDeadline(t: time.Time): void - /** - * SetWriteDeadline sets the deadline for future Write calls - * and any currently-blocked Write call. - * Even if write times out, it may return n > 0, indicating that - * some of the data was successfully written. - * A zero value for t means Write will not time out. - */ - setWriteDeadline(t: time.Time): void - } - /** - * A Listener is a generic network listener for stream-oriented protocols. - * - * Multiple goroutines may invoke methods on a Listener simultaneously. - */ - interface Listener { - [key:string]: any; - /** - * Accept waits for and returns the next connection to the listener. - */ - accept(): Conn - /** - * Close closes the listener. - * Any blocked Accept operations will be unblocked and return errors. - */ - close(): void - /** - * Addr returns the listener's network address. - */ - addr(): Addr - } - // @ts-ignore - import _cgopackage = cgo -} - -/** - * Package bytes implements functions for the manipulation of byte slices. - * It is analogous to the facilities of the [strings] package. - */ -namespace bytes { - /** - * A Reader implements the [io.Reader], [io.ReaderAt], [io.WriterTo], [io.Seeker], - * [io.ByteScanner], and [io.RuneScanner] interfaces by reading from - * a byte slice. - * Unlike a [Buffer], a Reader is read-only and supports seeking. - * The zero value for Reader operates like a Reader of an empty slice. - */ - interface Reader { - } - interface Reader { - /** - * Len returns the number of bytes of the unread portion of the - * slice. - */ - len(): number - } - interface Reader { - /** - * Size returns the original length of the underlying byte slice. - * Size is the number of bytes available for reading via [Reader.ReadAt]. - * The result is unaffected by any method calls except [Reader.Reset]. - */ - size(): number - } - interface Reader { - /** - * Read implements the [io.Reader] interface. - */ - read(b: string|Array): number - } - interface Reader { - /** - * ReadAt implements the [io.ReaderAt] interface. - */ - readAt(b: string|Array, off: number): number - } - interface Reader { - /** - * ReadByte implements the [io.ByteReader] interface. - */ - readByte(): number - } - interface Reader { - /** - * UnreadByte complements [Reader.ReadByte] in implementing the [io.ByteScanner] interface. - */ - unreadByte(): void - } - interface Reader { - /** - * ReadRune implements the [io.RuneReader] interface. - */ - readRune(): [number, number] - } - interface Reader { - /** - * UnreadRune complements [Reader.ReadRune] in implementing the [io.RuneScanner] interface. - */ - unreadRune(): void - } - interface Reader { - /** - * Seek implements the [io.Seeker] interface. - */ - seek(offset: number, whence: number): number - } - interface Reader { - /** - * WriteTo implements the [io.WriterTo] interface. - */ - writeTo(w: io.Writer): number - } - interface Reader { - /** - * Reset resets the [Reader] to be reading from b. - */ - reset(b: string|Array): void - } -} - -/** - * Package cron implements a crontab-like service to execute and schedule - * repeative tasks/jobs. - * - * Example: - * - * ``` - * c := cron.New() - * c.MustAdd("dailyReport", "0 0 * * *", func() { ... }) - * c.Start() - * ``` - */ -namespace cron { - /** - * Cron is a crontab-like struct for tasks/jobs scheduling. - */ - interface Cron { - } - interface Cron { - /** - * SetInterval changes the current cron tick interval - * (it usually should be >= 1 minute). - */ - setInterval(d: time.Duration): void - } - interface Cron { - /** - * SetTimezone changes the current cron tick timezone. - */ - setTimezone(l: time.Location): void - } - interface Cron { - /** - * MustAdd is similar to Add() but panic on failure. - */ - mustAdd(jobId: string, cronExpr: string, run: () => void): void - } - interface Cron { - /** - * Add registers a single cron job. - * - * If there is already a job with the provided id, then the old job - * will be replaced with the new one. - * - * cronExpr is a regular cron expression, eg. "0 *\/3 * * *" (aka. at minute 0 past every 3rd hour). - * Check cron.NewSchedule() for the supported tokens. - */ - add(jobId: string, cronExpr: string, fn: () => void): void - } - interface Cron { - /** - * Remove removes a single cron job by its id. - */ - remove(jobId: string): void - } - interface Cron { - /** - * RemoveAll removes all registered cron jobs. - */ - removeAll(): void - } - interface Cron { - /** - * Total returns the current total number of registered cron jobs. - */ - total(): number - } - interface Cron { - /** - * Jobs returns a shallow copy of the currently registered cron jobs. - */ - jobs(): Array<(Job | undefined)> - } - interface Cron { - /** - * Stop stops the current cron ticker (if not already). - * - * You can resume the ticker by calling Start(). - */ - stop(): void - } - interface Cron { - /** - * Start starts the cron ticker. - * - * Calling Start() on already started cron will restart the ticker. - */ - start(): void - } - interface Cron { - /** - * HasStarted checks whether the current Cron ticker has been started. - */ - hasStarted(): boolean - } -} - -/** - * Package slog provides structured logging, - * in which log records include a message, - * a severity level, and various other attributes - * expressed as key-value pairs. - * - * It defines a type, [Logger], - * which provides several methods (such as [Logger.Info] and [Logger.Error]) - * for reporting events of interest. - * - * Each Logger is associated with a [Handler]. - * A Logger output method creates a [Record] from the method arguments - * and passes it to the Handler, which decides how to handle it. - * There is a default Logger accessible through top-level functions - * (such as [Info] and [Error]) that call the corresponding Logger methods. - * - * A log record consists of a time, a level, a message, and a set of key-value - * pairs, where the keys are strings and the values may be of any type. - * As an example, - * - * ``` - * slog.Info("hello", "count", 3) - * ``` - * - * creates a record containing the time of the call, - * a level of Info, the message "hello", and a single - * pair with key "count" and value 3. - * - * The [Info] top-level function calls the [Logger.Info] method on the default Logger. - * In addition to [Logger.Info], there are methods for Debug, Warn and Error levels. - * Besides these convenience methods for common levels, - * there is also a [Logger.Log] method which takes the level as an argument. - * Each of these methods has a corresponding top-level function that uses the - * default logger. - * - * The default handler formats the log record's message, time, level, and attributes - * as a string and passes it to the [log] package. - * - * ``` - * 2022/11/08 15:28:26 INFO hello count=3 - * ``` - * - * For more control over the output format, create a logger with a different handler. - * This statement uses [New] to create a new logger with a [TextHandler] - * that writes structured records in text form to standard error: - * - * ``` - * logger := slog.New(slog.NewTextHandler(os.Stderr, nil)) - * ``` - * - * [TextHandler] output is a sequence of key=value pairs, easily and unambiguously - * parsed by machine. This statement: - * - * ``` - * logger.Info("hello", "count", 3) - * ``` - * - * produces this output: - * - * ``` - * time=2022-11-08T15:28:26.000-05:00 level=INFO msg=hello count=3 - * ``` - * - * The package also provides [JSONHandler], whose output is line-delimited JSON: - * - * ``` - * logger := slog.New(slog.NewJSONHandler(os.Stdout, nil)) - * logger.Info("hello", "count", 3) - * ``` - * - * produces this output: - * - * ``` - * {"time":"2022-11-08T15:28:26.000000000-05:00","level":"INFO","msg":"hello","count":3} - * ``` - * - * Both [TextHandler] and [JSONHandler] can be configured with [HandlerOptions]. - * There are options for setting the minimum level (see Levels, below), - * displaying the source file and line of the log call, and - * modifying attributes before they are logged. - * - * Setting a logger as the default with - * - * ``` - * slog.SetDefault(logger) - * ``` - * - * will cause the top-level functions like [Info] to use it. - * [SetDefault] also updates the default logger used by the [log] package, - * so that existing applications that use [log.Printf] and related functions - * will send log records to the logger's handler without needing to be rewritten. - * - * Some attributes are common to many log calls. - * For example, you may wish to include the URL or trace identifier of a server request - * with all log events arising from the request. - * Rather than repeat the attribute with every log call, you can use [Logger.With] - * to construct a new Logger containing the attributes: - * - * ``` - * logger2 := logger.With("url", r.URL) - * ``` - * - * The arguments to With are the same key-value pairs used in [Logger.Info]. - * The result is a new Logger with the same handler as the original, but additional - * attributes that will appear in the output of every call. - * - * # Levels - * - * A [Level] is an integer representing the importance or severity of a log event. - * The higher the level, the more severe the event. - * This package defines constants for the most common levels, - * but any int can be used as a level. - * - * In an application, you may wish to log messages only at a certain level or greater. - * One common configuration is to log messages at Info or higher levels, - * suppressing debug logging until it is needed. - * The built-in handlers can be configured with the minimum level to output by - * setting [HandlerOptions.Level]. - * The program's `main` function typically does this. - * The default value is LevelInfo. - * - * Setting the [HandlerOptions.Level] field to a [Level] value - * fixes the handler's minimum level throughout its lifetime. - * Setting it to a [LevelVar] allows the level to be varied dynamically. - * A LevelVar holds a Level and is safe to read or write from multiple - * goroutines. - * To vary the level dynamically for an entire program, first initialize - * a global LevelVar: - * - * ``` - * var programLevel = new(slog.LevelVar) // Info by default - * ``` - * - * Then use the LevelVar to construct a handler, and make it the default: - * - * ``` - * h := slog.NewJSONHandler(os.Stderr, &slog.HandlerOptions{Level: programLevel}) - * slog.SetDefault(slog.New(h)) - * ``` - * - * Now the program can change its logging level with a single statement: - * - * ``` - * programLevel.Set(slog.LevelDebug) - * ``` - * - * # Groups - * - * Attributes can be collected into groups. - * A group has a name that is used to qualify the names of its attributes. - * How this qualification is displayed depends on the handler. - * [TextHandler] separates the group and attribute names with a dot. - * [JSONHandler] treats each group as a separate JSON object, with the group name as the key. - * - * Use [Group] to create a Group attribute from a name and a list of key-value pairs: - * - * ``` - * slog.Group("request", - * "method", r.Method, - * "url", r.URL) - * ``` - * - * TextHandler would display this group as - * - * ``` - * request.method=GET request.url=http://example.com - * ``` - * - * JSONHandler would display it as - * - * ``` - * "request":{"method":"GET","url":"http://example.com"} - * ``` - * - * Use [Logger.WithGroup] to qualify all of a Logger's output - * with a group name. Calling WithGroup on a Logger results in a - * new Logger with the same Handler as the original, but with all - * its attributes qualified by the group name. - * - * This can help prevent duplicate attribute keys in large systems, - * where subsystems might use the same keys. - * Pass each subsystem a different Logger with its own group name so that - * potential duplicates are qualified: - * - * ``` - * logger := slog.Default().With("id", systemID) - * parserLogger := logger.WithGroup("parser") - * parseInput(input, parserLogger) - * ``` - * - * When parseInput logs with parserLogger, its keys will be qualified with "parser", - * so even if it uses the common key "id", the log line will have distinct keys. - * - * # Contexts - * - * Some handlers may wish to include information from the [context.Context] that is - * available at the call site. One example of such information - * is the identifier for the current span when tracing is enabled. - * - * The [Logger.Log] and [Logger.LogAttrs] methods take a context as a first - * argument, as do their corresponding top-level functions. - * - * Although the convenience methods on Logger (Info and so on) and the - * corresponding top-level functions do not take a context, the alternatives ending - * in "Context" do. For example, - * - * ``` - * slog.InfoContext(ctx, "message") - * ``` - * - * It is recommended to pass a context to an output method if one is available. - * - * # Attrs and Values - * - * An [Attr] is a key-value pair. The Logger output methods accept Attrs as well as - * alternating keys and values. The statement - * - * ``` - * slog.Info("hello", slog.Int("count", 3)) - * ``` - * - * behaves the same as - * - * ``` - * slog.Info("hello", "count", 3) - * ``` - * - * There are convenience constructors for [Attr] such as [Int], [String], and [Bool] - * for common types, as well as the function [Any] for constructing Attrs of any - * type. - * - * The value part of an Attr is a type called [Value]. - * Like an [any], a Value can hold any Go value, - * but it can represent typical values, including all numbers and strings, - * without an allocation. - * - * For the most efficient log output, use [Logger.LogAttrs]. - * It is similar to [Logger.Log] but accepts only Attrs, not alternating - * keys and values; this allows it, too, to avoid allocation. - * - * The call - * - * ``` - * logger.LogAttrs(ctx, slog.LevelInfo, "hello", slog.Int("count", 3)) - * ``` - * - * is the most efficient way to achieve the same output as - * - * ``` - * slog.InfoContext(ctx, "hello", "count", 3) - * ``` - * - * # Customizing a type's logging behavior - * - * If a type implements the [LogValuer] interface, the [Value] returned from its LogValue - * method is used for logging. You can use this to control how values of the type - * appear in logs. For example, you can redact secret information like passwords, - * or gather a struct's fields in a Group. See the examples under [LogValuer] for - * details. - * - * A LogValue method may return a Value that itself implements [LogValuer]. The [Value.Resolve] - * method handles these cases carefully, avoiding infinite loops and unbounded recursion. - * Handler authors and others may wish to use [Value.Resolve] instead of calling LogValue directly. - * - * # Wrapping output methods - * - * The logger functions use reflection over the call stack to find the file name - * and line number of the logging call within the application. This can produce - * incorrect source information for functions that wrap slog. For instance, if you - * define this function in file mylog.go: - * - * ``` - * func Infof(logger *slog.Logger, format string, args ...any) { - * logger.Info(fmt.Sprintf(format, args...)) - * } - * ``` - * - * and you call it like this in main.go: - * - * ``` - * Infof(slog.Default(), "hello, %s", "world") - * ``` - * - * then slog will report the source file as mylog.go, not main.go. - * - * A correct implementation of Infof will obtain the source location - * (pc) and pass it to NewRecord. - * The Infof function in the package-level example called "wrapping" - * demonstrates how to do this. - * - * # Working with Records - * - * Sometimes a Handler will need to modify a Record - * before passing it on to another Handler or backend. - * A Record contains a mixture of simple public fields (e.g. Time, Level, Message) - * and hidden fields that refer to state (such as attributes) indirectly. This - * means that modifying a simple copy of a Record (e.g. by calling - * [Record.Add] or [Record.AddAttrs] to add attributes) - * may have unexpected effects on the original. - * Before modifying a Record, use [Record.Clone] to - * create a copy that shares no state with the original, - * or create a new Record with [NewRecord] - * and build up its Attrs by traversing the old ones with [Record.Attrs]. - * - * # Performance considerations - * - * If profiling your application demonstrates that logging is taking significant time, - * the following suggestions may help. - * - * If many log lines have a common attribute, use [Logger.With] to create a Logger with - * that attribute. The built-in handlers will format that attribute only once, at the - * call to [Logger.With]. The [Handler] interface is designed to allow that optimization, - * and a well-written Handler should take advantage of it. - * - * The arguments to a log call are always evaluated, even if the log event is discarded. - * If possible, defer computation so that it happens only if the value is actually logged. - * For example, consider the call - * - * ``` - * slog.Info("starting request", "url", r.URL.String()) // may compute String unnecessarily - * ``` - * - * The URL.String method will be called even if the logger discards Info-level events. - * Instead, pass the URL directly: - * - * ``` - * slog.Info("starting request", "url", &r.URL) // calls URL.String only if needed - * ``` - * - * The built-in [TextHandler] will call its String method, but only - * if the log event is enabled. - * Avoiding the call to String also preserves the structure of the underlying value. - * For example [JSONHandler] emits the components of the parsed URL as a JSON object. - * If you want to avoid eagerly paying the cost of the String call - * without causing the handler to potentially inspect the structure of the value, - * wrap the value in a fmt.Stringer implementation that hides its Marshal methods. - * - * You can also use the [LogValuer] interface to avoid unnecessary work in disabled log - * calls. Say you need to log some expensive value: - * - * ``` - * slog.Debug("frobbing", "value", computeExpensiveValue(arg)) - * ``` - * - * Even if this line is disabled, computeExpensiveValue will be called. - * To avoid that, define a type implementing LogValuer: - * - * ``` - * type expensive struct { arg int } - * - * func (e expensive) LogValue() slog.Value { - * return slog.AnyValue(computeExpensiveValue(e.arg)) - * } - * ``` - * - * Then use a value of that type in log calls: - * - * ``` - * slog.Debug("frobbing", "value", expensive{arg}) - * ``` - * - * Now computeExpensiveValue will only be called when the line is enabled. - * - * The built-in handlers acquire a lock before calling [io.Writer.Write] - * to ensure that exactly one [Record] is written at a time in its entirety. - * Although each log record has a timestamp, - * the built-in handlers do not use that time to sort the written records. - * User-defined handlers are responsible for their own locking and sorting. - * - * # Writing a handler - * - * For a guide to writing a custom handler, see https://golang.org/s/slog-handler-guide. - */ -namespace slog { - // @ts-ignore - import loginternal = internal - /** - * A Logger records structured information about each call to its - * Log, Debug, Info, Warn, and Error methods. - * For each call, it creates a [Record] and passes it to a [Handler]. - * - * To create a new Logger, call [New] or a Logger method - * that begins "With". - */ - interface Logger { - } - interface Logger { - /** - * Handler returns l's Handler. - */ - handler(): Handler - } - interface Logger { - /** - * With returns a Logger that includes the given attributes - * in each output operation. Arguments are converted to - * attributes as if by [Logger.Log]. - */ - with(...args: any[]): (Logger) - } - interface Logger { - /** - * WithGroup returns a Logger that starts a group, if name is non-empty. - * The keys of all attributes added to the Logger will be qualified by the given - * name. (How that qualification happens depends on the [Handler.WithGroup] - * method of the Logger's Handler.) - * - * If name is empty, WithGroup returns the receiver. - */ - withGroup(name: string): (Logger) - } - interface Logger { - /** - * Enabled reports whether l emits log records at the given context and level. - */ - enabled(ctx: context.Context, level: Level): boolean - } - interface Logger { - /** - * Log emits a log record with the current time and the given level and message. - * The Record's Attrs consist of the Logger's attributes followed by - * the Attrs specified by args. - * - * The attribute arguments are processed as follows: - * ``` - * - If an argument is an Attr, it is used as is. - * - If an argument is a string and this is not the last argument, - * the following argument is treated as the value and the two are combined - * into an Attr. - * - Otherwise, the argument is treated as a value with key "!BADKEY". - * ``` - */ - log(ctx: context.Context, level: Level, msg: string, ...args: any[]): void - } - interface Logger { - /** - * LogAttrs is a more efficient version of [Logger.Log] that accepts only Attrs. - */ - logAttrs(ctx: context.Context, level: Level, msg: string, ...attrs: Attr[]): void - } - interface Logger { - /** - * Debug logs at [LevelDebug]. - */ - debug(msg: string, ...args: any[]): void - } - interface Logger { - /** - * DebugContext logs at [LevelDebug] with the given context. - */ - debugContext(ctx: context.Context, msg: string, ...args: any[]): void - } - interface Logger { - /** - * Info logs at [LevelInfo]. - */ - info(msg: string, ...args: any[]): void - } - interface Logger { - /** - * InfoContext logs at [LevelInfo] with the given context. - */ - infoContext(ctx: context.Context, msg: string, ...args: any[]): void - } - interface Logger { - /** - * Warn logs at [LevelWarn]. - */ - warn(msg: string, ...args: any[]): void - } - interface Logger { - /** - * WarnContext logs at [LevelWarn] with the given context. - */ - warnContext(ctx: context.Context, msg: string, ...args: any[]): void - } - interface Logger { - /** - * Error logs at [LevelError]. - */ - error(msg: string, ...args: any[]): void - } - interface Logger { - /** - * ErrorContext logs at [LevelError] with the given context. - */ - errorContext(ctx: context.Context, msg: string, ...args: any[]): void - } -} - /** * Package sql provides a generic interface around SQL (or SQL-like) * databases. @@ -18009,18 +17257,363 @@ namespace sql { } /** - * Package bufio implements buffered I/O. It wraps an io.Reader or io.Writer - * object, creating another object (Reader or Writer) that also implements - * the interface but provides buffering and some help for textual I/O. + * Package syntax parses regular expressions into parse trees and compiles + * parse trees into programs. Most clients of regular expressions will use the + * facilities of package [regexp] (such as [regexp.Compile] and [regexp.Match]) instead of this package. + * + * # Syntax + * + * The regular expression syntax understood by this package when parsing with the [Perl] flag is as follows. + * Parts of the syntax can be disabled by passing alternate flags to [Parse]. + * + * Single characters: + * + * ``` + * . any character, possibly including newline (flag s=true) + * [xyz] character class + * [^xyz] negated character class + * \d Perl character class + * \D negated Perl character class + * [[:alpha:]] ASCII character class + * [[:^alpha:]] negated ASCII character class + * \pN Unicode character class (one-letter name) + * \p{Greek} Unicode character class + * \PN negated Unicode character class (one-letter name) + * \P{Greek} negated Unicode character class + * ``` + * + * Composites: + * + * ``` + * xy x followed by y + * x|y x or y (prefer x) + * ``` + * + * Repetitions: + * + * ``` + * x* zero or more x, prefer more + * x+ one or more x, prefer more + * x? zero or one x, prefer one + * x{n,m} n or n+1 or ... or m x, prefer more + * x{n,} n or more x, prefer more + * x{n} exactly n x + * x*? zero or more x, prefer fewer + * x+? one or more x, prefer fewer + * x?? zero or one x, prefer zero + * x{n,m}? n or n+1 or ... or m x, prefer fewer + * x{n,}? n or more x, prefer fewer + * x{n}? exactly n x + * ``` + * + * Implementation restriction: The counting forms x{n,m}, x{n,}, and x{n} + * reject forms that create a minimum or maximum repetition count above 1000. + * Unlimited repetitions are not subject to this restriction. + * + * Grouping: + * + * ``` + * (re) numbered capturing group (submatch) + * (?Pre) named & numbered capturing group (submatch) + * (?re) named & numbered capturing group (submatch) + * (?:re) non-capturing group + * (?flags) set flags within current group; non-capturing + * (?flags:re) set flags during re; non-capturing + * + * Flag syntax is xyz (set) or -xyz (clear) or xy-z (set xy, clear z). The flags are: + * + * i case-insensitive (default false) + * m multi-line mode: ^ and $ match begin/end line in addition to begin/end text (default false) + * s let . match \n (default false) + * U ungreedy: swap meaning of x* and x*?, x+ and x+?, etc (default false) + * ``` + * + * Empty strings: + * + * ``` + * ^ at beginning of text or line (flag m=true) + * $ at end of text (like \z not \Z) or line (flag m=true) + * \A at beginning of text + * \b at ASCII word boundary (\w on one side and \W, \A, or \z on the other) + * \B not at ASCII word boundary + * \z at end of text + * ``` + * + * Escape sequences: + * + * ``` + * \a bell (== \007) + * \f form feed (== \014) + * \t horizontal tab (== \011) + * \n newline (== \012) + * \r carriage return (== \015) + * \v vertical tab character (== \013) + * \* literal *, for any punctuation character * + * \123 octal character code (up to three digits) + * \x7F hex character code (exactly two digits) + * \x{10FFFF} hex character code + * \Q...\E literal text ... even if ... has punctuation + * ``` + * + * Character class elements: + * + * ``` + * x single character + * A-Z character range (inclusive) + * \d Perl character class + * [:foo:] ASCII character class foo + * \p{Foo} Unicode character class Foo + * \pF Unicode character class F (one-letter name) + * ``` + * + * Named character classes as character class elements: + * + * ``` + * [\d] digits (== \d) + * [^\d] not digits (== \D) + * [\D] not digits (== \D) + * [^\D] not not digits (== \d) + * [[:name:]] named ASCII class inside character class (== [:name:]) + * [^[:name:]] named ASCII class inside negated character class (== [:^name:]) + * [\p{Name}] named Unicode property inside character class (== \p{Name}) + * [^\p{Name}] named Unicode property inside negated character class (== \P{Name}) + * ``` + * + * Perl character classes (all ASCII-only): + * + * ``` + * \d digits (== [0-9]) + * \D not digits (== [^0-9]) + * \s whitespace (== [\t\n\f\r ]) + * \S not whitespace (== [^\t\n\f\r ]) + * \w word characters (== [0-9A-Za-z_]) + * \W not word characters (== [^0-9A-Za-z_]) + * ``` + * + * ASCII character classes: + * + * ``` + * [[:alnum:]] alphanumeric (== [0-9A-Za-z]) + * [[:alpha:]] alphabetic (== [A-Za-z]) + * [[:ascii:]] ASCII (== [\x00-\x7F]) + * [[:blank:]] blank (== [\t ]) + * [[:cntrl:]] control (== [\x00-\x1F\x7F]) + * [[:digit:]] digits (== [0-9]) + * [[:graph:]] graphical (== [!-~] == [A-Za-z0-9!"#$%&'()*+,\-./:;<=>?@[\\\]^_`{|}~]) + * [[:lower:]] lower case (== [a-z]) + * [[:print:]] printable (== [ -~] == [ [:graph:]]) + * [[:punct:]] punctuation (== [!-/:-@[-`{-~]) + * [[:space:]] whitespace (== [\t\n\v\f\r ]) + * [[:upper:]] upper case (== [A-Z]) + * [[:word:]] word characters (== [0-9A-Za-z_]) + * [[:xdigit:]] hex digit (== [0-9A-Fa-f]) + * ``` + * + * Unicode character classes are those in [unicode.Categories], + * [unicode.CategoryAliases], and [unicode.Scripts]. */ -namespace bufio { +namespace syntax { /** - * ReadWriter stores pointers to a [Reader] and a [Writer]. - * It implements [io.ReadWriter]. + * Flags control the behavior of the parser and record information about regexp context. */ - type _siUUmcO = Reader&Writer - interface ReadWriter extends _siUUmcO { + interface Flags extends Number{} +} + +/** + * Package net provides a portable interface for network I/O, including + * TCP/IP, UDP, domain name resolution, and Unix domain sockets. + * + * Although the package provides access to low-level networking + * primitives, most clients will need only the basic interface provided + * by the [Dial], [Listen], and Accept functions and the associated + * [Conn] and [Listener] interfaces. The crypto/tls package uses + * the same interfaces and similar Dial and Listen functions. + * + * The Dial function connects to a server: + * + * ``` + * conn, err := net.Dial("tcp", "golang.org:80") + * if err != nil { + * // handle error + * } + * fmt.Fprintf(conn, "GET / HTTP/1.0\r\n\r\n") + * status, err := bufio.NewReader(conn).ReadString('\n') + * // ... + * ``` + * + * The Listen function creates servers: + * + * ``` + * ln, err := net.Listen("tcp", ":8080") + * if err != nil { + * // handle error + * } + * for { + * conn, err := ln.Accept() + * if err != nil { + * // handle error + * } + * go handleConnection(conn) + * } + * ``` + * + * # Name Resolution + * + * The method for resolving domain names, whether indirectly with functions like Dial + * or directly with functions like [LookupHost] and [LookupAddr], varies by operating system. + * + * On Unix systems, the resolver has two options for resolving names. + * It can use a pure Go resolver that sends DNS requests directly to the servers + * listed in /etc/resolv.conf, or it can use a cgo-based resolver that calls C + * library routines such as getaddrinfo and getnameinfo. + * + * On Unix the pure Go resolver is preferred over the cgo resolver, because a blocked DNS + * request consumes only a goroutine, while a blocked C call consumes an operating system thread. + * When cgo is available, the cgo-based resolver is used instead under a variety of + * conditions: on systems that do not let programs make direct DNS requests (OS X), + * when the LOCALDOMAIN environment variable is present (even if empty), + * when the RES_OPTIONS or HOSTALIASES environment variable is non-empty, + * when the ASR_CONFIG environment variable is non-empty (OpenBSD only), + * when /etc/resolv.conf or /etc/nsswitch.conf specify the use of features that the + * Go resolver does not implement. + * + * On all systems (except Plan 9), when the cgo resolver is being used + * this package applies a concurrent cgo lookup limit to prevent the system + * from running out of system threads. Currently, it is limited to 500 concurrent lookups. + * + * The resolver decision can be overridden by setting the netdns value of the + * GODEBUG environment variable (see package runtime) to go or cgo, as in: + * + * ``` + * export GODEBUG=netdns=go # force pure Go resolver + * export GODEBUG=netdns=cgo # force native resolver (cgo, win32) + * ``` + * + * The decision can also be forced while building the Go source tree + * by setting the netgo or netcgo build tag. + * The netgo build tag disables entirely the use of the native (CGO) resolver, + * meaning the Go resolver is the only one that can be used. + * With the netcgo build tag the native and the pure Go resolver are compiled into the binary, + * but the native (CGO) resolver is preferred over the Go resolver. + * With netcgo, the Go resolver can still be forced at runtime with GODEBUG=netdns=go. + * + * A numeric netdns setting, as in GODEBUG=netdns=1, causes the resolver + * to print debugging information about its decisions. + * To force a particular resolver while also printing debugging information, + * join the two settings by a plus sign, as in GODEBUG=netdns=go+1. + * + * The Go resolver will send an EDNS0 additional header with a DNS request, + * to signal a willingness to accept a larger DNS packet size. + * This can reportedly cause sporadic failures with the DNS server run + * by some modems and routers. Setting GODEBUG=netedns0=0 will disable + * sending the additional header. + * + * On macOS, if Go code that uses the net package is built with + * -buildmode=c-archive, linking the resulting archive into a C program + * requires passing -lresolv when linking the C code. + * + * On Plan 9, the resolver always accesses /net/cs and /net/dns. + * + * On Windows, in Go 1.18.x and earlier, the resolver always used C + * library functions, such as GetAddrInfo and DnsQuery. + */ +namespace net { + /** + * Conn is a generic stream-oriented network connection. + * + * Multiple goroutines may invoke methods on a Conn simultaneously. + */ + interface Conn { + [key:string]: any; + /** + * Read reads data from the connection. + * Read can be made to time out and return an error after a fixed + * time limit; see SetDeadline and SetReadDeadline. + */ + read(b: string|Array): number + /** + * Write writes data to the connection. + * Write can be made to time out and return an error after a fixed + * time limit; see SetDeadline and SetWriteDeadline. + */ + write(b: string|Array): number + /** + * Close closes the connection. + * Any blocked Read or Write operations will be unblocked and return errors. + * Close may or may not block until any buffered data is sent; + * for TCP connections see [*TCPConn.SetLinger]. + */ + close(): void + /** + * LocalAddr returns the local network address, if known. + */ + localAddr(): Addr + /** + * RemoteAddr returns the remote network address, if known. + */ + remoteAddr(): Addr + /** + * SetDeadline sets the read and write deadlines associated + * with the connection. It is equivalent to calling both + * SetReadDeadline and SetWriteDeadline. + * + * A deadline is an absolute time after which I/O operations + * fail instead of blocking. The deadline applies to all future + * and pending I/O, not just the immediately following call to + * Read or Write. After a deadline has been exceeded, the + * connection can be refreshed by setting a deadline in the future. + * + * If the deadline is exceeded a call to Read or Write or to other + * I/O methods will return an error that wraps os.ErrDeadlineExceeded. + * This can be tested using errors.Is(err, os.ErrDeadlineExceeded). + * The error's Timeout method will return true, but note that there + * are other possible errors for which the Timeout method will + * return true even if the deadline has not been exceeded. + * + * An idle timeout can be implemented by repeatedly extending + * the deadline after successful Read or Write calls. + * + * A zero value for t means I/O operations will not time out. + */ + setDeadline(t: time.Time): void + /** + * SetReadDeadline sets the deadline for future Read calls + * and any currently-blocked Read call. + * A zero value for t means Read will not time out. + */ + setReadDeadline(t: time.Time): void + /** + * SetWriteDeadline sets the deadline for future Write calls + * and any currently-blocked Write call. + * Even if write times out, it may return n > 0, indicating that + * some of the data was successfully written. + * A zero value for t means Write will not time out. + */ + setWriteDeadline(t: time.Time): void } + /** + * A Listener is a generic network listener for stream-oriented protocols. + * + * Multiple goroutines may invoke methods on a Listener simultaneously. + */ + interface Listener { + [key:string]: any; + /** + * Accept waits for and returns the next connection to the listener. + */ + accept(): Conn + /** + * Close closes the listener. + * Any blocked Accept operations will be unblocked and return errors. + */ + close(): void + /** + * Addr returns the listener's network address. + */ + addr(): Addr + } + // @ts-ignore + import _cgopackage = cgo } /** @@ -19070,166 +18663,163 @@ namespace http { } /** - * Package syntax parses regular expressions into parse trees and compiles - * parse trees into programs. Most clients of regular expressions will use the - * facilities of package [regexp] (such as [regexp.Compile] and [regexp.Match]) instead of this package. + * Package blob defines a lightweight abstration for interacting with + * various storage services (local filesystem, S3, etc.). * - * # Syntax - * - * The regular expression syntax understood by this package when parsing with the [Perl] flag is as follows. - * Parts of the syntax can be disabled by passing alternate flags to [Parse]. - * - * Single characters: - * - * ``` - * . any character, possibly including newline (flag s=true) - * [xyz] character class - * [^xyz] negated character class - * \d Perl character class - * \D negated Perl character class - * [[:alpha:]] ASCII character class - * [[:^alpha:]] negated ASCII character class - * \pN Unicode character class (one-letter name) - * \p{Greek} Unicode character class - * \PN negated Unicode character class (one-letter name) - * \P{Greek} negated Unicode character class - * ``` - * - * Composites: - * - * ``` - * xy x followed by y - * x|y x or y (prefer x) - * ``` - * - * Repetitions: - * - * ``` - * x* zero or more x, prefer more - * x+ one or more x, prefer more - * x? zero or one x, prefer one - * x{n,m} n or n+1 or ... or m x, prefer more - * x{n,} n or more x, prefer more - * x{n} exactly n x - * x*? zero or more x, prefer fewer - * x+? one or more x, prefer fewer - * x?? zero or one x, prefer zero - * x{n,m}? n or n+1 or ... or m x, prefer fewer - * x{n,}? n or more x, prefer fewer - * x{n}? exactly n x - * ``` - * - * Implementation restriction: The counting forms x{n,m}, x{n,}, and x{n} - * reject forms that create a minimum or maximum repetition count above 1000. - * Unlimited repetitions are not subject to this restriction. - * - * Grouping: - * - * ``` - * (re) numbered capturing group (submatch) - * (?Pre) named & numbered capturing group (submatch) - * (?re) named & numbered capturing group (submatch) - * (?:re) non-capturing group - * (?flags) set flags within current group; non-capturing - * (?flags:re) set flags during re; non-capturing - * - * Flag syntax is xyz (set) or -xyz (clear) or xy-z (set xy, clear z). The flags are: - * - * i case-insensitive (default false) - * m multi-line mode: ^ and $ match begin/end line in addition to begin/end text (default false) - * s let . match \n (default false) - * U ungreedy: swap meaning of x* and x*?, x+ and x+?, etc (default false) - * ``` - * - * Empty strings: - * - * ``` - * ^ at beginning of text or line (flag m=true) - * $ at end of text (like \z not \Z) or line (flag m=true) - * \A at beginning of text - * \b at ASCII word boundary (\w on one side and \W, \A, or \z on the other) - * \B not at ASCII word boundary - * \z at end of text - * ``` - * - * Escape sequences: - * - * ``` - * \a bell (== \007) - * \f form feed (== \014) - * \t horizontal tab (== \011) - * \n newline (== \012) - * \r carriage return (== \015) - * \v vertical tab character (== \013) - * \* literal *, for any punctuation character * - * \123 octal character code (up to three digits) - * \x7F hex character code (exactly two digits) - * \x{10FFFF} hex character code - * \Q...\E literal text ... even if ... has punctuation - * ``` - * - * Character class elements: - * - * ``` - * x single character - * A-Z character range (inclusive) - * \d Perl character class - * [:foo:] ASCII character class foo - * \p{Foo} Unicode character class Foo - * \pF Unicode character class F (one-letter name) - * ``` - * - * Named character classes as character class elements: - * - * ``` - * [\d] digits (== \d) - * [^\d] not digits (== \D) - * [\D] not digits (== \D) - * [^\D] not not digits (== \d) - * [[:name:]] named ASCII class inside character class (== [:name:]) - * [^[:name:]] named ASCII class inside negated character class (== [:^name:]) - * [\p{Name}] named Unicode property inside character class (== \p{Name}) - * [^\p{Name}] named Unicode property inside negated character class (== \P{Name}) - * ``` - * - * Perl character classes (all ASCII-only): - * - * ``` - * \d digits (== [0-9]) - * \D not digits (== [^0-9]) - * \s whitespace (== [\t\n\f\r ]) - * \S not whitespace (== [^\t\n\f\r ]) - * \w word characters (== [0-9A-Za-z_]) - * \W not word characters (== [^0-9A-Za-z_]) - * ``` - * - * ASCII character classes: - * - * ``` - * [[:alnum:]] alphanumeric (== [0-9A-Za-z]) - * [[:alpha:]] alphabetic (== [A-Za-z]) - * [[:ascii:]] ASCII (== [\x00-\x7F]) - * [[:blank:]] blank (== [\t ]) - * [[:cntrl:]] control (== [\x00-\x1F\x7F]) - * [[:digit:]] digits (== [0-9]) - * [[:graph:]] graphical (== [!-~] == [A-Za-z0-9!"#$%&'()*+,\-./:;<=>?@[\\\]^_`{|}~]) - * [[:lower:]] lower case (== [a-z]) - * [[:print:]] printable (== [ -~] == [ [:graph:]]) - * [[:punct:]] punctuation (== [!-/:-@[-`{-~]) - * [[:space:]] whitespace (== [\t\n\v\f\r ]) - * [[:upper:]] upper case (== [A-Z]) - * [[:word:]] word characters (== [0-9A-Za-z_]) - * [[:xdigit:]] hex digit (== [0-9A-Fa-f]) - * ``` - * - * Unicode character classes are those in [unicode.Categories], - * [unicode.CategoryAliases], and [unicode.Scripts]. + * NB! + * For compatibility with earlier PocketBase versions and to prevent + * unnecessary breaking changes, this package is based and implemented + * as a minimal, stripped down version of the previously used gocloud.dev/blob. + * While there is no promise that it won't diverge in the future to accommodate + * better some PocketBase specific use cases, currently it copies and + * tries to follow as close as possible the same implementations, + * conventions and rules for the key escaping/unescaping, blob read/write + * interfaces and struct options as gocloud.dev/blob, therefore the + * credits goes to the original Go Cloud Development Kit Authors. */ -namespace syntax { +namespace blob { /** - * Flags control the behavior of the parser and record information about regexp context. + * ListObject represents a single blob returned from List. */ - interface Flags extends Number{} + interface ListObject { + /** + * Key is the key for this blob. + */ + key: string + /** + * ModTime is the time the blob was last modified. + */ + modTime: time.Time + /** + * Size is the size of the blob's content in bytes. + */ + size: number + /** + * MD5 is an MD5 hash of the blob contents or nil if not available. + */ + md5: string|Array + /** + * IsDir indicates that this result represents a "directory" in the + * hierarchical namespace, ending in ListOptions.Delimiter. Key can be + * passed as ListOptions.Prefix to list items in the "directory". + * Fields other than Key and IsDir will not be set if IsDir is true. + */ + isDir: boolean + } + /** + * Attributes contains attributes about a blob. + */ + interface Attributes { + /** + * CacheControl specifies caching attributes that services may use + * when serving the blob. + * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Cache-Control + */ + cacheControl: string + /** + * ContentDisposition specifies whether the blob content is expected to be + * displayed inline or as an attachment. + * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Disposition + */ + contentDisposition: string + /** + * ContentEncoding specifies the encoding used for the blob's content, if any. + * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Encoding + */ + contentEncoding: string + /** + * ContentLanguage specifies the language used in the blob's content, if any. + * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Language + */ + contentLanguage: string + /** + * ContentType is the MIME type of the blob. It will not be empty. + * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Type + */ + contentType: string + /** + * Metadata holds key/value pairs associated with the blob. + * Keys are guaranteed to be in lowercase, even if the backend service + * has case-sensitive keys (although note that Metadata written via + * this package will always be lowercased). If there are duplicate + * case-insensitive keys (e.g., "foo" and "FOO"), only one value + * will be kept, and it is undefined which one. + */ + metadata: _TygojaDict + /** + * CreateTime is the time the blob was created, if available. If not available, + * CreateTime will be the zero time. + */ + createTime: time.Time + /** + * ModTime is the time the blob was last modified. + */ + modTime: time.Time + /** + * Size is the size of the blob's content in bytes. + */ + size: number + /** + * MD5 is an MD5 hash of the blob contents or nil if not available. + */ + md5: string|Array + /** + * ETag for the blob; see https://en.wikipedia.org/wiki/HTTP_ETag. + */ + eTag: string + } + /** + * Reader reads bytes from a blob. + * It implements io.ReadSeekCloser, and must be closed after reads are finished. + */ + interface Reader { + } + interface Reader { + /** + * Read implements io.Reader (https://golang.org/pkg/io/#Reader). + */ + read(p: string|Array): number + } + interface Reader { + /** + * Seek implements io.Seeker (https://golang.org/pkg/io/#Seeker). + */ + seek(offset: number, whence: number): number + } + interface Reader { + /** + * Close implements io.Closer (https://golang.org/pkg/io/#Closer). + */ + close(): void + } + interface Reader { + /** + * ContentType returns the MIME type of the blob. + */ + contentType(): string + } + interface Reader { + /** + * ModTime returns the time the blob was last modified. + */ + modTime(): time.Time + } + interface Reader { + /** + * Size returns the size of the blob content in bytes. + */ + size(): number + } + interface Reader { + /** + * WriteTo reads from r and writes to w until there's no more data or + * an error occurs. + * The return value is the number of bytes written to w. + * + * It implements the io.WriterTo interface. + */ + writeTo(w: io.Writer): number + } } namespace store { @@ -19539,8 +19129,8 @@ namespace hook { * TaggedHook defines a proxy hook which register handlers that are triggered only * if the TaggedHook.tags are empty or includes at least one of the event data tag(s). */ - type _sfGCbiv = mainHook - interface TaggedHook extends _sfGCbiv { + type _sCZUkwD = mainHook + interface TaggedHook extends _sCZUkwD { } interface TaggedHook { /** @@ -19571,632 +19161,6 @@ namespace hook { } } -namespace exec { - /** - * Cmd represents an external command being prepared or run. - * - * A Cmd cannot be reused after calling its [Cmd.Run], [Cmd.Output] or [Cmd.CombinedOutput] - * methods. - */ - interface Cmd { - /** - * Path is the path of the command to run. - * - * This is the only field that must be set to a non-zero - * value. If Path is relative, it is evaluated relative - * to Dir. - */ - path: string - /** - * Args holds command line arguments, including the command as Args[0]. - * If the Args field is empty or nil, Run uses {Path}. - * - * In typical use, both Path and Args are set by calling Command. - */ - args: Array - /** - * Env specifies the environment of the process. - * Each entry is of the form "key=value". - * If Env is nil, the new process uses the current process's - * environment. - * If Env contains duplicate environment keys, only the last - * value in the slice for each duplicate key is used. - * As a special case on Windows, SYSTEMROOT is always added if - * missing and not explicitly set to the empty string. - * - * See also the Dir field, which may set PWD in the environment. - */ - env: Array - /** - * Dir specifies the working directory of the command. - * If Dir is the empty string, Run runs the command in the - * calling process's current directory. - * - * On Unix systems, the value of Dir also determines the - * child process's PWD environment variable if not otherwise - * specified. A Unix process represents its working directory - * not by name but as an implicit reference to a node in the - * file tree. So, if the child process obtains its working - * directory by calling a function such as C's getcwd, which - * computes the canonical name by walking up the file tree, it - * will not recover the original value of Dir if that value - * was an alias involving symbolic links. However, if the - * child process calls Go's [os.Getwd] or GNU C's - * get_current_dir_name, and the value of PWD is an alias for - * the current directory, those functions will return the - * value of PWD, which matches the value of Dir. - */ - dir: string - /** - * Stdin specifies the process's standard input. - * - * If Stdin is nil, the process reads from the null device (os.DevNull). - * - * If Stdin is an *os.File, the process's standard input is connected - * directly to that file. - * - * Otherwise, during the execution of the command a separate - * goroutine reads from Stdin and delivers that data to the command - * over a pipe. In this case, Wait does not complete until the goroutine - * stops copying, either because it has reached the end of Stdin - * (EOF or a read error), or because writing to the pipe returned an error, - * or because a nonzero WaitDelay was set and expired. - */ - stdin: io.Reader - /** - * Stdout and Stderr specify the process's standard output and error. - * - * If either is nil, Run connects the corresponding file descriptor - * to the null device (os.DevNull). - * - * If either is an *os.File, the corresponding output from the process - * is connected directly to that file. - * - * Otherwise, during the execution of the command a separate goroutine - * reads from the process over a pipe and delivers that data to the - * corresponding Writer. In this case, Wait does not complete until the - * goroutine reaches EOF or encounters an error or a nonzero WaitDelay - * expires. - * - * If Stdout and Stderr are the same writer, and have a type that can - * be compared with ==, at most one goroutine at a time will call Write. - */ - stdout: io.Writer - stderr: io.Writer - /** - * ExtraFiles specifies additional open files to be inherited by the - * new process. It does not include standard input, standard output, or - * standard error. If non-nil, entry i becomes file descriptor 3+i. - * - * ExtraFiles is not supported on Windows. - */ - extraFiles: Array<(os.File | undefined)> - /** - * SysProcAttr holds optional, operating system-specific attributes. - * Run passes it to os.StartProcess as the os.ProcAttr's Sys field. - */ - sysProcAttr?: syscall.SysProcAttr - /** - * Process is the underlying process, once started. - */ - process?: os.Process - /** - * ProcessState contains information about an exited process. - * If the process was started successfully, Wait or Run will - * populate its ProcessState when the command completes. - */ - processState?: os.ProcessState - err: Error // LookPath error, if any. - /** - * If Cancel is non-nil, the command must have been created with - * CommandContext and Cancel will be called when the command's - * Context is done. By default, CommandContext sets Cancel to - * call the Kill method on the command's Process. - * - * Typically a custom Cancel will send a signal to the command's - * Process, but it may instead take other actions to initiate cancellation, - * such as closing a stdin or stdout pipe or sending a shutdown request on a - * network socket. - * - * If the command exits with a success status after Cancel is - * called, and Cancel does not return an error equivalent to - * os.ErrProcessDone, then Wait and similar methods will return a non-nil - * error: either an error wrapping the one returned by Cancel, - * or the error from the Context. - * (If the command exits with a non-success status, or Cancel - * returns an error that wraps os.ErrProcessDone, Wait and similar methods - * continue to return the command's usual exit status.) - * - * If Cancel is set to nil, nothing will happen immediately when the command's - * Context is done, but a nonzero WaitDelay will still take effect. That may - * be useful, for example, to work around deadlocks in commands that do not - * support shutdown signals but are expected to always finish quickly. - * - * Cancel will not be called if Start returns a non-nil error. - */ - cancel: () => void - /** - * If WaitDelay is non-zero, it bounds the time spent waiting on two sources - * of unexpected delay in Wait: a child process that fails to exit after the - * associated Context is canceled, and a child process that exits but leaves - * its I/O pipes unclosed. - * - * The WaitDelay timer starts when either the associated Context is done or a - * call to Wait observes that the child process has exited, whichever occurs - * first. When the delay has elapsed, the command shuts down the child process - * and/or its I/O pipes. - * - * If the child process has failed to exit — perhaps because it ignored or - * failed to receive a shutdown signal from a Cancel function, or because no - * Cancel function was set — then it will be terminated using os.Process.Kill. - * - * Then, if the I/O pipes communicating with the child process are still open, - * those pipes are closed in order to unblock any goroutines currently blocked - * on Read or Write calls. - * - * If pipes are closed due to WaitDelay, no Cancel call has occurred, - * and the command has otherwise exited with a successful status, Wait and - * similar methods will return ErrWaitDelay instead of nil. - * - * If WaitDelay is zero (the default), I/O pipes will be read until EOF, - * which might not occur until orphaned subprocesses of the command have - * also closed their descriptors for the pipes. - */ - waitDelay: time.Duration - } - interface Cmd { - /** - * String returns a human-readable description of c. - * It is intended only for debugging. - * In particular, it is not suitable for use as input to a shell. - * The output of String may vary across Go releases. - */ - string(): string - } - interface Cmd { - /** - * Run starts the specified command and waits for it to complete. - * - * The returned error is nil if the command runs, has no problems - * copying stdin, stdout, and stderr, and exits with a zero exit - * status. - * - * If the command starts but does not complete successfully, the error is of - * type [*ExitError]. Other error types may be returned for other situations. - * - * If the calling goroutine has locked the operating system thread - * with [runtime.LockOSThread] and modified any inheritable OS-level - * thread state (for example, Linux or Plan 9 name spaces), the new - * process will inherit the caller's thread state. - */ - run(): void - } - interface Cmd { - /** - * Start starts the specified command but does not wait for it to complete. - * - * If Start returns successfully, the c.Process field will be set. - * - * After a successful call to Start the [Cmd.Wait] method must be called in - * order to release associated system resources. - */ - start(): void - } - interface Cmd { - /** - * Wait waits for the command to exit and waits for any copying to - * stdin or copying from stdout or stderr to complete. - * - * The command must have been started by [Cmd.Start]. - * - * The returned error is nil if the command runs, has no problems - * copying stdin, stdout, and stderr, and exits with a zero exit - * status. - * - * If the command fails to run or doesn't complete successfully, the - * error is of type [*ExitError]. Other error types may be - * returned for I/O problems. - * - * If any of c.Stdin, c.Stdout or c.Stderr are not an [*os.File], Wait also waits - * for the respective I/O loop copying to or from the process to complete. - * - * Wait releases any resources associated with the [Cmd]. - */ - wait(): void - } - interface Cmd { - /** - * Output runs the command and returns its standard output. - * Any returned error will usually be of type [*ExitError]. - * If c.Stderr was nil and the returned error is of type - * [*ExitError], Output populates the Stderr field of the - * returned error. - */ - output(): string|Array - } - interface Cmd { - /** - * CombinedOutput runs the command and returns its combined standard - * output and standard error. - */ - combinedOutput(): string|Array - } - interface Cmd { - /** - * StdinPipe returns a pipe that will be connected to the command's - * standard input when the command starts. - * The pipe will be closed automatically after [Cmd.Wait] sees the command exit. - * A caller need only call Close to force the pipe to close sooner. - * For example, if the command being run will not exit until standard input - * is closed, the caller must close the pipe. - */ - stdinPipe(): io.WriteCloser - } - interface Cmd { - /** - * StdoutPipe returns a pipe that will be connected to the command's - * standard output when the command starts. - * - * [Cmd.Wait] will close the pipe after seeing the command exit, so most callers - * need not close the pipe themselves. It is thus incorrect to call Wait - * before all reads from the pipe have completed. - * For the same reason, it is incorrect to call [Cmd.Run] when using StdoutPipe. - * See the example for idiomatic usage. - */ - stdoutPipe(): io.ReadCloser - } - interface Cmd { - /** - * StderrPipe returns a pipe that will be connected to the command's - * standard error when the command starts. - * - * [Cmd.Wait] will close the pipe after seeing the command exit, so most callers - * need not close the pipe themselves. It is thus incorrect to call Wait - * before all reads from the pipe have completed. - * For the same reason, it is incorrect to use [Cmd.Run] when using StderrPipe. - * See the StdoutPipe example for idiomatic usage. - */ - stderrPipe(): io.ReadCloser - } - interface Cmd { - /** - * Environ returns a copy of the environment in which the command would be run - * as it is currently configured. - */ - environ(): Array - } -} - -namespace mailer { - /** - * Message defines a generic email message struct. - */ - interface Message { - from: { address: string; name?: string; } - to: Array<{ address: string; name?: string; }> - bcc: Array<{ address: string; name?: string; }> - cc: Array<{ address: string; name?: string; }> - subject: string - html: string - text: string - headers: _TygojaDict - attachments: _TygojaDict - inlineAttachments: _TygojaDict - } - /** - * Mailer defines a base mail client interface. - */ - interface Mailer { - [key:string]: any; - /** - * Send sends an email with the provided Message. - */ - send(message: Message): void - } -} - -namespace subscriptions { - /** - * Broker defines a struct for managing subscriptions clients. - */ - interface Broker { - } - interface Broker { - /** - * Clients returns a shallow copy of all registered clients indexed - * with their connection id. - */ - clients(): _TygojaDict - } - interface Broker { - /** - * ChunkedClients splits the current clients into a chunked slice. - */ - chunkedClients(chunkSize: number): Array> - } - interface Broker { - /** - * TotalClients returns the total number of registered clients. - */ - totalClients(): number - } - interface Broker { - /** - * ClientById finds a registered client by its id. - * - * Returns non-nil error when client with clientId is not registered. - */ - clientById(clientId: string): Client - } - interface Broker { - /** - * Register adds a new client to the broker instance. - */ - register(client: Client): void - } - interface Broker { - /** - * Unregister removes a single client by its id and marks it as discarded. - * - * If client with clientId doesn't exist, this method does nothing. - */ - unregister(clientId: string): void - } - /** - * Client is an interface for a generic subscription client. - */ - interface Client { - [key:string]: any; - /** - * Id Returns the unique id of the client. - */ - id(): string - /** - * Channel returns the client's communication channel. - * - * NB! The channel shouldn't be used after calling Discard(). - */ - channel(): undefined - /** - * Subscriptions returns a shallow copy of the client subscriptions matching the prefixes. - * If no prefix is specified, returns all subscriptions. - */ - subscriptions(...prefixes: string[]): _TygojaDict - /** - * Subscribe subscribes the client to the provided subscriptions list. - * - * Each subscription can also have "options" (json serialized SubscriptionOptions) as query parameter. - * - * Example: - * - * ``` - * Subscribe( - * "subscriptionA", - * `subscriptionB?options={"query":{"a":1},"headers":{"x_token":"abc"}}`, - * ) - * ``` - */ - subscribe(...subs: string[]): void - /** - * Unsubscribe unsubscribes the client from the provided subscriptions list. - */ - unsubscribe(...subs: string[]): void - /** - * HasSubscription checks if the client is subscribed to `sub`. - */ - hasSubscription(sub: string): boolean - /** - * Set stores any value to the client's context. - */ - set(key: string, value: any): void - /** - * Unset removes a single value from the client's context. - */ - unset(key: string): void - /** - * Get retrieves the key value from the client's context. - */ - get(key: string): any - /** - * Discard marks the client as "discarded" (and closes its channel), - * meaning that it shouldn't be used anymore for sending new messages. - * - * It is safe to call Discard() multiple times. - */ - discard(): void - /** - * IsDiscarded indicates whether the client has been "discarded" - * and should no longer be used. - */ - isDiscarded(): boolean - /** - * Send sends the specified message to the client's channel (if not discarded). - */ - send(m: Message): void - } - /** - * Message defines a client's channel data. - */ - interface Message { - name: string - data: string|Array - } - interface Message { - /** - * WriteSSE writes the current message in a SSE format into the provided writer. - * - * For example, writing to a router.Event: - * - * ``` - * m := Message{Name: "users/create", Data: []byte{...}} - * m.WriteSSE(e.Response, "yourEventId") - * e.Flush() - * ``` - */ - writeSSE(w: io.Writer, eventId: string): void - } -} - -/** - * Package blob defines a lightweight abstration for interacting with - * various storage services (local filesystem, S3, etc.). - * - * NB! - * For compatibility with earlier PocketBase versions and to prevent - * unnecessary breaking changes, this package is based and implemented - * as a minimal, stripped down version of the previously used gocloud.dev/blob. - * While there is no promise that it won't diverge in the future to accommodate - * better some PocketBase specific use cases, currently it copies and - * tries to follow as close as possible the same implementations, - * conventions and rules for the key escaping/unescaping, blob read/write - * interfaces and struct options as gocloud.dev/blob, therefore the - * credits goes to the original Go Cloud Development Kit Authors. - */ -namespace blob { - /** - * ListObject represents a single blob returned from List. - */ - interface ListObject { - /** - * Key is the key for this blob. - */ - key: string - /** - * ModTime is the time the blob was last modified. - */ - modTime: time.Time - /** - * Size is the size of the blob's content in bytes. - */ - size: number - /** - * MD5 is an MD5 hash of the blob contents or nil if not available. - */ - md5: string|Array - /** - * IsDir indicates that this result represents a "directory" in the - * hierarchical namespace, ending in ListOptions.Delimiter. Key can be - * passed as ListOptions.Prefix to list items in the "directory". - * Fields other than Key and IsDir will not be set if IsDir is true. - */ - isDir: boolean - } - /** - * Attributes contains attributes about a blob. - */ - interface Attributes { - /** - * CacheControl specifies caching attributes that services may use - * when serving the blob. - * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Cache-Control - */ - cacheControl: string - /** - * ContentDisposition specifies whether the blob content is expected to be - * displayed inline or as an attachment. - * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Disposition - */ - contentDisposition: string - /** - * ContentEncoding specifies the encoding used for the blob's content, if any. - * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Encoding - */ - contentEncoding: string - /** - * ContentLanguage specifies the language used in the blob's content, if any. - * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Language - */ - contentLanguage: string - /** - * ContentType is the MIME type of the blob. It will not be empty. - * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Type - */ - contentType: string - /** - * Metadata holds key/value pairs associated with the blob. - * Keys are guaranteed to be in lowercase, even if the backend service - * has case-sensitive keys (although note that Metadata written via - * this package will always be lowercased). If there are duplicate - * case-insensitive keys (e.g., "foo" and "FOO"), only one value - * will be kept, and it is undefined which one. - */ - metadata: _TygojaDict - /** - * CreateTime is the time the blob was created, if available. If not available, - * CreateTime will be the zero time. - */ - createTime: time.Time - /** - * ModTime is the time the blob was last modified. - */ - modTime: time.Time - /** - * Size is the size of the blob's content in bytes. - */ - size: number - /** - * MD5 is an MD5 hash of the blob contents or nil if not available. - */ - md5: string|Array - /** - * ETag for the blob; see https://en.wikipedia.org/wiki/HTTP_ETag. - */ - eTag: string - } - /** - * Reader reads bytes from a blob. - * It implements io.ReadSeekCloser, and must be closed after reads are finished. - */ - interface Reader { - } - interface Reader { - /** - * Read implements io.Reader (https://golang.org/pkg/io/#Reader). - */ - read(p: string|Array): number - } - interface Reader { - /** - * Seek implements io.Seeker (https://golang.org/pkg/io/#Seeker). - */ - seek(offset: number, whence: number): number - } - interface Reader { - /** - * Close implements io.Closer (https://golang.org/pkg/io/#Closer). - */ - close(): void - } - interface Reader { - /** - * ContentType returns the MIME type of the blob. - */ - contentType(): string - } - interface Reader { - /** - * ModTime returns the time the blob was last modified. - */ - modTime(): time.Time - } - interface Reader { - /** - * Size returns the size of the blob content in bytes. - */ - size(): number - } - interface Reader { - /** - * WriteTo reads from r and writes to w until there's no more data or - * an error occurs. - * The return value is the number of bytes written to w. - * - * It implements the io.WriterTo interface. - */ - writeTo(w: io.Writer): number - } -} - /** * Package types implements some commonly used db serializable types * like datetime, json, etc. @@ -20547,8 +19511,8 @@ namespace router { * * NB! It is expected that the Response and Request fields are always set. */ - type _spzsKee = hook.Event - interface Event extends _spzsKee { + type _sZGLYtd = hook.Event + interface Event extends _sZGLYtd { response: http.ResponseWriter request?: http.Request } @@ -20784,8 +19748,8 @@ namespace router { * http.ListenAndServe("localhost:8090", mux) * ``` */ - type _srFdoIB = RouterGroup - interface Router extends _srFdoIB { + type _sTIrqJi = RouterGroup + interface Router extends _sTIrqJi { } interface Router { /** @@ -20795,6 +19759,593 @@ namespace router { } } +/** + * Package slog provides structured logging, + * in which log records include a message, + * a severity level, and various other attributes + * expressed as key-value pairs. + * + * It defines a type, [Logger], + * which provides several methods (such as [Logger.Info] and [Logger.Error]) + * for reporting events of interest. + * + * Each Logger is associated with a [Handler]. + * A Logger output method creates a [Record] from the method arguments + * and passes it to the Handler, which decides how to handle it. + * There is a default Logger accessible through top-level functions + * (such as [Info] and [Error]) that call the corresponding Logger methods. + * + * A log record consists of a time, a level, a message, and a set of key-value + * pairs, where the keys are strings and the values may be of any type. + * As an example, + * + * ``` + * slog.Info("hello", "count", 3) + * ``` + * + * creates a record containing the time of the call, + * a level of Info, the message "hello", and a single + * pair with key "count" and value 3. + * + * The [Info] top-level function calls the [Logger.Info] method on the default Logger. + * In addition to [Logger.Info], there are methods for Debug, Warn and Error levels. + * Besides these convenience methods for common levels, + * there is also a [Logger.Log] method which takes the level as an argument. + * Each of these methods has a corresponding top-level function that uses the + * default logger. + * + * The default handler formats the log record's message, time, level, and attributes + * as a string and passes it to the [log] package. + * + * ``` + * 2022/11/08 15:28:26 INFO hello count=3 + * ``` + * + * For more control over the output format, create a logger with a different handler. + * This statement uses [New] to create a new logger with a [TextHandler] + * that writes structured records in text form to standard error: + * + * ``` + * logger := slog.New(slog.NewTextHandler(os.Stderr, nil)) + * ``` + * + * [TextHandler] output is a sequence of key=value pairs, easily and unambiguously + * parsed by machine. This statement: + * + * ``` + * logger.Info("hello", "count", 3) + * ``` + * + * produces this output: + * + * ``` + * time=2022-11-08T15:28:26.000-05:00 level=INFO msg=hello count=3 + * ``` + * + * The package also provides [JSONHandler], whose output is line-delimited JSON: + * + * ``` + * logger := slog.New(slog.NewJSONHandler(os.Stdout, nil)) + * logger.Info("hello", "count", 3) + * ``` + * + * produces this output: + * + * ``` + * {"time":"2022-11-08T15:28:26.000000000-05:00","level":"INFO","msg":"hello","count":3} + * ``` + * + * Both [TextHandler] and [JSONHandler] can be configured with [HandlerOptions]. + * There are options for setting the minimum level (see Levels, below), + * displaying the source file and line of the log call, and + * modifying attributes before they are logged. + * + * Setting a logger as the default with + * + * ``` + * slog.SetDefault(logger) + * ``` + * + * will cause the top-level functions like [Info] to use it. + * [SetDefault] also updates the default logger used by the [log] package, + * so that existing applications that use [log.Printf] and related functions + * will send log records to the logger's handler without needing to be rewritten. + * + * Some attributes are common to many log calls. + * For example, you may wish to include the URL or trace identifier of a server request + * with all log events arising from the request. + * Rather than repeat the attribute with every log call, you can use [Logger.With] + * to construct a new Logger containing the attributes: + * + * ``` + * logger2 := logger.With("url", r.URL) + * ``` + * + * The arguments to With are the same key-value pairs used in [Logger.Info]. + * The result is a new Logger with the same handler as the original, but additional + * attributes that will appear in the output of every call. + * + * # Levels + * + * A [Level] is an integer representing the importance or severity of a log event. + * The higher the level, the more severe the event. + * This package defines constants for the most common levels, + * but any int can be used as a level. + * + * In an application, you may wish to log messages only at a certain level or greater. + * One common configuration is to log messages at Info or higher levels, + * suppressing debug logging until it is needed. + * The built-in handlers can be configured with the minimum level to output by + * setting [HandlerOptions.Level]. + * The program's `main` function typically does this. + * The default value is LevelInfo. + * + * Setting the [HandlerOptions.Level] field to a [Level] value + * fixes the handler's minimum level throughout its lifetime. + * Setting it to a [LevelVar] allows the level to be varied dynamically. + * A LevelVar holds a Level and is safe to read or write from multiple + * goroutines. + * To vary the level dynamically for an entire program, first initialize + * a global LevelVar: + * + * ``` + * var programLevel = new(slog.LevelVar) // Info by default + * ``` + * + * Then use the LevelVar to construct a handler, and make it the default: + * + * ``` + * h := slog.NewJSONHandler(os.Stderr, &slog.HandlerOptions{Level: programLevel}) + * slog.SetDefault(slog.New(h)) + * ``` + * + * Now the program can change its logging level with a single statement: + * + * ``` + * programLevel.Set(slog.LevelDebug) + * ``` + * + * # Groups + * + * Attributes can be collected into groups. + * A group has a name that is used to qualify the names of its attributes. + * How this qualification is displayed depends on the handler. + * [TextHandler] separates the group and attribute names with a dot. + * [JSONHandler] treats each group as a separate JSON object, with the group name as the key. + * + * Use [Group] to create a Group attribute from a name and a list of key-value pairs: + * + * ``` + * slog.Group("request", + * "method", r.Method, + * "url", r.URL) + * ``` + * + * TextHandler would display this group as + * + * ``` + * request.method=GET request.url=http://example.com + * ``` + * + * JSONHandler would display it as + * + * ``` + * "request":{"method":"GET","url":"http://example.com"} + * ``` + * + * Use [Logger.WithGroup] to qualify all of a Logger's output + * with a group name. Calling WithGroup on a Logger results in a + * new Logger with the same Handler as the original, but with all + * its attributes qualified by the group name. + * + * This can help prevent duplicate attribute keys in large systems, + * where subsystems might use the same keys. + * Pass each subsystem a different Logger with its own group name so that + * potential duplicates are qualified: + * + * ``` + * logger := slog.Default().With("id", systemID) + * parserLogger := logger.WithGroup("parser") + * parseInput(input, parserLogger) + * ``` + * + * When parseInput logs with parserLogger, its keys will be qualified with "parser", + * so even if it uses the common key "id", the log line will have distinct keys. + * + * # Contexts + * + * Some handlers may wish to include information from the [context.Context] that is + * available at the call site. One example of such information + * is the identifier for the current span when tracing is enabled. + * + * The [Logger.Log] and [Logger.LogAttrs] methods take a context as a first + * argument, as do their corresponding top-level functions. + * + * Although the convenience methods on Logger (Info and so on) and the + * corresponding top-level functions do not take a context, the alternatives ending + * in "Context" do. For example, + * + * ``` + * slog.InfoContext(ctx, "message") + * ``` + * + * It is recommended to pass a context to an output method if one is available. + * + * # Attrs and Values + * + * An [Attr] is a key-value pair. The Logger output methods accept Attrs as well as + * alternating keys and values. The statement + * + * ``` + * slog.Info("hello", slog.Int("count", 3)) + * ``` + * + * behaves the same as + * + * ``` + * slog.Info("hello", "count", 3) + * ``` + * + * There are convenience constructors for [Attr] such as [Int], [String], and [Bool] + * for common types, as well as the function [Any] for constructing Attrs of any + * type. + * + * The value part of an Attr is a type called [Value]. + * Like an [any], a Value can hold any Go value, + * but it can represent typical values, including all numbers and strings, + * without an allocation. + * + * For the most efficient log output, use [Logger.LogAttrs]. + * It is similar to [Logger.Log] but accepts only Attrs, not alternating + * keys and values; this allows it, too, to avoid allocation. + * + * The call + * + * ``` + * logger.LogAttrs(ctx, slog.LevelInfo, "hello", slog.Int("count", 3)) + * ``` + * + * is the most efficient way to achieve the same output as + * + * ``` + * slog.InfoContext(ctx, "hello", "count", 3) + * ``` + * + * # Customizing a type's logging behavior + * + * If a type implements the [LogValuer] interface, the [Value] returned from its LogValue + * method is used for logging. You can use this to control how values of the type + * appear in logs. For example, you can redact secret information like passwords, + * or gather a struct's fields in a Group. See the examples under [LogValuer] for + * details. + * + * A LogValue method may return a Value that itself implements [LogValuer]. The [Value.Resolve] + * method handles these cases carefully, avoiding infinite loops and unbounded recursion. + * Handler authors and others may wish to use [Value.Resolve] instead of calling LogValue directly. + * + * # Wrapping output methods + * + * The logger functions use reflection over the call stack to find the file name + * and line number of the logging call within the application. This can produce + * incorrect source information for functions that wrap slog. For instance, if you + * define this function in file mylog.go: + * + * ``` + * func Infof(logger *slog.Logger, format string, args ...any) { + * logger.Info(fmt.Sprintf(format, args...)) + * } + * ``` + * + * and you call it like this in main.go: + * + * ``` + * Infof(slog.Default(), "hello, %s", "world") + * ``` + * + * then slog will report the source file as mylog.go, not main.go. + * + * A correct implementation of Infof will obtain the source location + * (pc) and pass it to NewRecord. + * The Infof function in the package-level example called "wrapping" + * demonstrates how to do this. + * + * # Working with Records + * + * Sometimes a Handler will need to modify a Record + * before passing it on to another Handler or backend. + * A Record contains a mixture of simple public fields (e.g. Time, Level, Message) + * and hidden fields that refer to state (such as attributes) indirectly. This + * means that modifying a simple copy of a Record (e.g. by calling + * [Record.Add] or [Record.AddAttrs] to add attributes) + * may have unexpected effects on the original. + * Before modifying a Record, use [Record.Clone] to + * create a copy that shares no state with the original, + * or create a new Record with [NewRecord] + * and build up its Attrs by traversing the old ones with [Record.Attrs]. + * + * # Performance considerations + * + * If profiling your application demonstrates that logging is taking significant time, + * the following suggestions may help. + * + * If many log lines have a common attribute, use [Logger.With] to create a Logger with + * that attribute. The built-in handlers will format that attribute only once, at the + * call to [Logger.With]. The [Handler] interface is designed to allow that optimization, + * and a well-written Handler should take advantage of it. + * + * The arguments to a log call are always evaluated, even if the log event is discarded. + * If possible, defer computation so that it happens only if the value is actually logged. + * For example, consider the call + * + * ``` + * slog.Info("starting request", "url", r.URL.String()) // may compute String unnecessarily + * ``` + * + * The URL.String method will be called even if the logger discards Info-level events. + * Instead, pass the URL directly: + * + * ``` + * slog.Info("starting request", "url", &r.URL) // calls URL.String only if needed + * ``` + * + * The built-in [TextHandler] will call its String method, but only + * if the log event is enabled. + * Avoiding the call to String also preserves the structure of the underlying value. + * For example [JSONHandler] emits the components of the parsed URL as a JSON object. + * If you want to avoid eagerly paying the cost of the String call + * without causing the handler to potentially inspect the structure of the value, + * wrap the value in a fmt.Stringer implementation that hides its Marshal methods. + * + * You can also use the [LogValuer] interface to avoid unnecessary work in disabled log + * calls. Say you need to log some expensive value: + * + * ``` + * slog.Debug("frobbing", "value", computeExpensiveValue(arg)) + * ``` + * + * Even if this line is disabled, computeExpensiveValue will be called. + * To avoid that, define a type implementing LogValuer: + * + * ``` + * type expensive struct { arg int } + * + * func (e expensive) LogValue() slog.Value { + * return slog.AnyValue(computeExpensiveValue(e.arg)) + * } + * ``` + * + * Then use a value of that type in log calls: + * + * ``` + * slog.Debug("frobbing", "value", expensive{arg}) + * ``` + * + * Now computeExpensiveValue will only be called when the line is enabled. + * + * The built-in handlers acquire a lock before calling [io.Writer.Write] + * to ensure that exactly one [Record] is written at a time in its entirety. + * Although each log record has a timestamp, + * the built-in handlers do not use that time to sort the written records. + * User-defined handlers are responsible for their own locking and sorting. + * + * # Writing a handler + * + * For a guide to writing a custom handler, see https://golang.org/s/slog-handler-guide. + */ +namespace slog { + // @ts-ignore + import loginternal = internal + /** + * A Logger records structured information about each call to its + * Log, Debug, Info, Warn, and Error methods. + * For each call, it creates a [Record] and passes it to a [Handler]. + * + * To create a new Logger, call [New] or a Logger method + * that begins "With". + */ + interface Logger { + } + interface Logger { + /** + * Handler returns l's Handler. + */ + handler(): Handler + } + interface Logger { + /** + * With returns a Logger that includes the given attributes + * in each output operation. Arguments are converted to + * attributes as if by [Logger.Log]. + */ + with(...args: any[]): (Logger) + } + interface Logger { + /** + * WithGroup returns a Logger that starts a group, if name is non-empty. + * The keys of all attributes added to the Logger will be qualified by the given + * name. (How that qualification happens depends on the [Handler.WithGroup] + * method of the Logger's Handler.) + * + * If name is empty, WithGroup returns the receiver. + */ + withGroup(name: string): (Logger) + } + interface Logger { + /** + * Enabled reports whether l emits log records at the given context and level. + */ + enabled(ctx: context.Context, level: Level): boolean + } + interface Logger { + /** + * Log emits a log record with the current time and the given level and message. + * The Record's Attrs consist of the Logger's attributes followed by + * the Attrs specified by args. + * + * The attribute arguments are processed as follows: + * ``` + * - If an argument is an Attr, it is used as is. + * - If an argument is a string and this is not the last argument, + * the following argument is treated as the value and the two are combined + * into an Attr. + * - Otherwise, the argument is treated as a value with key "!BADKEY". + * ``` + */ + log(ctx: context.Context, level: Level, msg: string, ...args: any[]): void + } + interface Logger { + /** + * LogAttrs is a more efficient version of [Logger.Log] that accepts only Attrs. + */ + logAttrs(ctx: context.Context, level: Level, msg: string, ...attrs: Attr[]): void + } + interface Logger { + /** + * Debug logs at [LevelDebug]. + */ + debug(msg: string, ...args: any[]): void + } + interface Logger { + /** + * DebugContext logs at [LevelDebug] with the given context. + */ + debugContext(ctx: context.Context, msg: string, ...args: any[]): void + } + interface Logger { + /** + * Info logs at [LevelInfo]. + */ + info(msg: string, ...args: any[]): void + } + interface Logger { + /** + * InfoContext logs at [LevelInfo] with the given context. + */ + infoContext(ctx: context.Context, msg: string, ...args: any[]): void + } + interface Logger { + /** + * Warn logs at [LevelWarn]. + */ + warn(msg: string, ...args: any[]): void + } + interface Logger { + /** + * WarnContext logs at [LevelWarn] with the given context. + */ + warnContext(ctx: context.Context, msg: string, ...args: any[]): void + } + interface Logger { + /** + * Error logs at [LevelError]. + */ + error(msg: string, ...args: any[]): void + } + interface Logger { + /** + * ErrorContext logs at [LevelError] with the given context. + */ + errorContext(ctx: context.Context, msg: string, ...args: any[]): void + } +} + +/** + * Package cron implements a crontab-like service to execute and schedule + * repeative tasks/jobs. + * + * Example: + * + * ``` + * c := cron.New() + * c.MustAdd("dailyReport", "0 0 * * *", func() { ... }) + * c.Start() + * ``` + */ +namespace cron { + /** + * Cron is a crontab-like struct for tasks/jobs scheduling. + */ + interface Cron { + } + interface Cron { + /** + * SetInterval changes the current cron tick interval + * (it usually should be >= 1 minute). + */ + setInterval(d: time.Duration): void + } + interface Cron { + /** + * SetTimezone changes the current cron tick timezone. + */ + setTimezone(l: time.Location): void + } + interface Cron { + /** + * MustAdd is similar to Add() but panic on failure. + */ + mustAdd(jobId: string, cronExpr: string, run: () => void): void + } + interface Cron { + /** + * Add registers a single cron job. + * + * If there is already a job with the provided id, then the old job + * will be replaced with the new one. + * + * cronExpr is a regular cron expression, eg. "0 *\/3 * * *" (aka. at minute 0 past every 3rd hour). + * Check cron.NewSchedule() for the supported tokens. + */ + add(jobId: string, cronExpr: string, fn: () => void): void + } + interface Cron { + /** + * Remove removes a single cron job by its id. + */ + remove(jobId: string): void + } + interface Cron { + /** + * RemoveAll removes all registered cron jobs. + */ + removeAll(): void + } + interface Cron { + /** + * Total returns the current total number of registered cron jobs. + */ + total(): number + } + interface Cron { + /** + * Jobs returns a shallow copy of the currently registered cron jobs. + */ + jobs(): Array<(Job | undefined)> + } + interface Cron { + /** + * Stop stops the current cron ticker (if not already). + * + * You can resume the ticker by calling Start(). + */ + stop(): void + } + interface Cron { + /** + * Start starts the cron ticker. + * + * Calling Start() on already started cron will restart the ticker. + */ + start(): void + } + interface Cron { + /** + * HasStarted checks whether the current Cron ticker has been started. + */ + hasStarted(): boolean + } +} + namespace auth { /** * @todo refactor and consider replace with a plain struct @@ -22047,6 +21598,472 @@ namespace cobra { } } +namespace exec { + /** + * Cmd represents an external command being prepared or run. + * + * A Cmd cannot be reused after calling its [Cmd.Run], [Cmd.Output] or [Cmd.CombinedOutput] + * methods. + */ + interface Cmd { + /** + * Path is the path of the command to run. + * + * This is the only field that must be set to a non-zero + * value. If Path is relative, it is evaluated relative + * to Dir. + */ + path: string + /** + * Args holds command line arguments, including the command as Args[0]. + * If the Args field is empty or nil, Run uses {Path}. + * + * In typical use, both Path and Args are set by calling Command. + */ + args: Array + /** + * Env specifies the environment of the process. + * Each entry is of the form "key=value". + * If Env is nil, the new process uses the current process's + * environment. + * If Env contains duplicate environment keys, only the last + * value in the slice for each duplicate key is used. + * As a special case on Windows, SYSTEMROOT is always added if + * missing and not explicitly set to the empty string. + * + * See also the Dir field, which may set PWD in the environment. + */ + env: Array + /** + * Dir specifies the working directory of the command. + * If Dir is the empty string, Run runs the command in the + * calling process's current directory. + * + * On Unix systems, the value of Dir also determines the + * child process's PWD environment variable if not otherwise + * specified. A Unix process represents its working directory + * not by name but as an implicit reference to a node in the + * file tree. So, if the child process obtains its working + * directory by calling a function such as C's getcwd, which + * computes the canonical name by walking up the file tree, it + * will not recover the original value of Dir if that value + * was an alias involving symbolic links. However, if the + * child process calls Go's [os.Getwd] or GNU C's + * get_current_dir_name, and the value of PWD is an alias for + * the current directory, those functions will return the + * value of PWD, which matches the value of Dir. + */ + dir: string + /** + * Stdin specifies the process's standard input. + * + * If Stdin is nil, the process reads from the null device (os.DevNull). + * + * If Stdin is an *os.File, the process's standard input is connected + * directly to that file. + * + * Otherwise, during the execution of the command a separate + * goroutine reads from Stdin and delivers that data to the command + * over a pipe. In this case, Wait does not complete until the goroutine + * stops copying, either because it has reached the end of Stdin + * (EOF or a read error), or because writing to the pipe returned an error, + * or because a nonzero WaitDelay was set and expired. + */ + stdin: io.Reader + /** + * Stdout and Stderr specify the process's standard output and error. + * + * If either is nil, Run connects the corresponding file descriptor + * to the null device (os.DevNull). + * + * If either is an *os.File, the corresponding output from the process + * is connected directly to that file. + * + * Otherwise, during the execution of the command a separate goroutine + * reads from the process over a pipe and delivers that data to the + * corresponding Writer. In this case, Wait does not complete until the + * goroutine reaches EOF or encounters an error or a nonzero WaitDelay + * expires. + * + * If Stdout and Stderr are the same writer, and have a type that can + * be compared with ==, at most one goroutine at a time will call Write. + */ + stdout: io.Writer + stderr: io.Writer + /** + * ExtraFiles specifies additional open files to be inherited by the + * new process. It does not include standard input, standard output, or + * standard error. If non-nil, entry i becomes file descriptor 3+i. + * + * ExtraFiles is not supported on Windows. + */ + extraFiles: Array<(os.File | undefined)> + /** + * SysProcAttr holds optional, operating system-specific attributes. + * Run passes it to os.StartProcess as the os.ProcAttr's Sys field. + */ + sysProcAttr?: syscall.SysProcAttr + /** + * Process is the underlying process, once started. + */ + process?: os.Process + /** + * ProcessState contains information about an exited process. + * If the process was started successfully, Wait or Run will + * populate its ProcessState when the command completes. + */ + processState?: os.ProcessState + err: Error // LookPath error, if any. + /** + * If Cancel is non-nil, the command must have been created with + * CommandContext and Cancel will be called when the command's + * Context is done. By default, CommandContext sets Cancel to + * call the Kill method on the command's Process. + * + * Typically a custom Cancel will send a signal to the command's + * Process, but it may instead take other actions to initiate cancellation, + * such as closing a stdin or stdout pipe or sending a shutdown request on a + * network socket. + * + * If the command exits with a success status after Cancel is + * called, and Cancel does not return an error equivalent to + * os.ErrProcessDone, then Wait and similar methods will return a non-nil + * error: either an error wrapping the one returned by Cancel, + * or the error from the Context. + * (If the command exits with a non-success status, or Cancel + * returns an error that wraps os.ErrProcessDone, Wait and similar methods + * continue to return the command's usual exit status.) + * + * If Cancel is set to nil, nothing will happen immediately when the command's + * Context is done, but a nonzero WaitDelay will still take effect. That may + * be useful, for example, to work around deadlocks in commands that do not + * support shutdown signals but are expected to always finish quickly. + * + * Cancel will not be called if Start returns a non-nil error. + */ + cancel: () => void + /** + * If WaitDelay is non-zero, it bounds the time spent waiting on two sources + * of unexpected delay in Wait: a child process that fails to exit after the + * associated Context is canceled, and a child process that exits but leaves + * its I/O pipes unclosed. + * + * The WaitDelay timer starts when either the associated Context is done or a + * call to Wait observes that the child process has exited, whichever occurs + * first. When the delay has elapsed, the command shuts down the child process + * and/or its I/O pipes. + * + * If the child process has failed to exit — perhaps because it ignored or + * failed to receive a shutdown signal from a Cancel function, or because no + * Cancel function was set — then it will be terminated using os.Process.Kill. + * + * Then, if the I/O pipes communicating with the child process are still open, + * those pipes are closed in order to unblock any goroutines currently blocked + * on Read or Write calls. + * + * If pipes are closed due to WaitDelay, no Cancel call has occurred, + * and the command has otherwise exited with a successful status, Wait and + * similar methods will return ErrWaitDelay instead of nil. + * + * If WaitDelay is zero (the default), I/O pipes will be read until EOF, + * which might not occur until orphaned subprocesses of the command have + * also closed their descriptors for the pipes. + */ + waitDelay: time.Duration + } + interface Cmd { + /** + * String returns a human-readable description of c. + * It is intended only for debugging. + * In particular, it is not suitable for use as input to a shell. + * The output of String may vary across Go releases. + */ + string(): string + } + interface Cmd { + /** + * Run starts the specified command and waits for it to complete. + * + * The returned error is nil if the command runs, has no problems + * copying stdin, stdout, and stderr, and exits with a zero exit + * status. + * + * If the command starts but does not complete successfully, the error is of + * type [*ExitError]. Other error types may be returned for other situations. + * + * If the calling goroutine has locked the operating system thread + * with [runtime.LockOSThread] and modified any inheritable OS-level + * thread state (for example, Linux or Plan 9 name spaces), the new + * process will inherit the caller's thread state. + */ + run(): void + } + interface Cmd { + /** + * Start starts the specified command but does not wait for it to complete. + * + * If Start returns successfully, the c.Process field will be set. + * + * After a successful call to Start the [Cmd.Wait] method must be called in + * order to release associated system resources. + */ + start(): void + } + interface Cmd { + /** + * Wait waits for the command to exit and waits for any copying to + * stdin or copying from stdout or stderr to complete. + * + * The command must have been started by [Cmd.Start]. + * + * The returned error is nil if the command runs, has no problems + * copying stdin, stdout, and stderr, and exits with a zero exit + * status. + * + * If the command fails to run or doesn't complete successfully, the + * error is of type [*ExitError]. Other error types may be + * returned for I/O problems. + * + * If any of c.Stdin, c.Stdout or c.Stderr are not an [*os.File], Wait also waits + * for the respective I/O loop copying to or from the process to complete. + * + * Wait releases any resources associated with the [Cmd]. + */ + wait(): void + } + interface Cmd { + /** + * Output runs the command and returns its standard output. + * Any returned error will usually be of type [*ExitError]. + * If c.Stderr was nil and the returned error is of type + * [*ExitError], Output populates the Stderr field of the + * returned error. + */ + output(): string|Array + } + interface Cmd { + /** + * CombinedOutput runs the command and returns its combined standard + * output and standard error. + */ + combinedOutput(): string|Array + } + interface Cmd { + /** + * StdinPipe returns a pipe that will be connected to the command's + * standard input when the command starts. + * The pipe will be closed automatically after [Cmd.Wait] sees the command exit. + * A caller need only call Close to force the pipe to close sooner. + * For example, if the command being run will not exit until standard input + * is closed, the caller must close the pipe. + */ + stdinPipe(): io.WriteCloser + } + interface Cmd { + /** + * StdoutPipe returns a pipe that will be connected to the command's + * standard output when the command starts. + * + * [Cmd.Wait] will close the pipe after seeing the command exit, so most callers + * need not close the pipe themselves. It is thus incorrect to call Wait + * before all reads from the pipe have completed. + * For the same reason, it is incorrect to call [Cmd.Run] when using StdoutPipe. + * See the example for idiomatic usage. + */ + stdoutPipe(): io.ReadCloser + } + interface Cmd { + /** + * StderrPipe returns a pipe that will be connected to the command's + * standard error when the command starts. + * + * [Cmd.Wait] will close the pipe after seeing the command exit, so most callers + * need not close the pipe themselves. It is thus incorrect to call Wait + * before all reads from the pipe have completed. + * For the same reason, it is incorrect to use [Cmd.Run] when using StderrPipe. + * See the StdoutPipe example for idiomatic usage. + */ + stderrPipe(): io.ReadCloser + } + interface Cmd { + /** + * Environ returns a copy of the environment in which the command would be run + * as it is currently configured. + */ + environ(): Array + } +} + +namespace mailer { + /** + * Message defines a generic email message struct. + */ + interface Message { + from: { address: string; name?: string; } + to: Array<{ address: string; name?: string; }> + bcc: Array<{ address: string; name?: string; }> + cc: Array<{ address: string; name?: string; }> + subject: string + html: string + text: string + headers: _TygojaDict + attachments: _TygojaDict + inlineAttachments: _TygojaDict + } + /** + * Mailer defines a base mail client interface. + */ + interface Mailer { + [key:string]: any; + /** + * Send sends an email with the provided Message. + */ + send(message: Message): void + } +} + +namespace subscriptions { + /** + * Broker defines a struct for managing subscriptions clients. + */ + interface Broker { + } + interface Broker { + /** + * Clients returns a shallow copy of all registered clients indexed + * with their connection id. + */ + clients(): _TygojaDict + } + interface Broker { + /** + * ChunkedClients splits the current clients into a chunked slice. + */ + chunkedClients(chunkSize: number): Array> + } + interface Broker { + /** + * TotalClients returns the total number of registered clients. + */ + totalClients(): number + } + interface Broker { + /** + * ClientById finds a registered client by its id. + * + * Returns non-nil error when client with clientId is not registered. + */ + clientById(clientId: string): Client + } + interface Broker { + /** + * Register adds a new client to the broker instance. + */ + register(client: Client): void + } + interface Broker { + /** + * Unregister removes a single client by its id and marks it as discarded. + * + * If client with clientId doesn't exist, this method does nothing. + */ + unregister(clientId: string): void + } + /** + * Client is an interface for a generic subscription client. + */ + interface Client { + [key:string]: any; + /** + * Id Returns the unique id of the client. + */ + id(): string + /** + * Channel returns the client's communication channel. + * + * NB! The channel shouldn't be used after calling Discard(). + */ + channel(): undefined + /** + * Subscriptions returns a shallow copy of the client subscriptions matching the prefixes. + * If no prefix is specified, returns all subscriptions. + */ + subscriptions(...prefixes: string[]): _TygojaDict + /** + * Subscribe subscribes the client to the provided subscriptions list. + * + * Each subscription can also have "options" (json serialized SubscriptionOptions) as query parameter. + * + * Example: + * + * ``` + * Subscribe( + * "subscriptionA", + * `subscriptionB?options={"query":{"a":1},"headers":{"x_token":"abc"}}`, + * ) + * ``` + */ + subscribe(...subs: string[]): void + /** + * Unsubscribe unsubscribes the client from the provided subscriptions list. + */ + unsubscribe(...subs: string[]): void + /** + * HasSubscription checks if the client is subscribed to `sub`. + */ + hasSubscription(sub: string): boolean + /** + * Set stores any value to the client's context. + */ + set(key: string, value: any): void + /** + * Unset removes a single value from the client's context. + */ + unset(key: string): void + /** + * Get retrieves the key value from the client's context. + */ + get(key: string): any + /** + * Discard marks the client as "discarded" (and closes its channel), + * meaning that it shouldn't be used anymore for sending new messages. + * + * It is safe to call Discard() multiple times. + */ + discard(): void + /** + * IsDiscarded indicates whether the client has been "discarded" + * and should no longer be used. + */ + isDiscarded(): boolean + /** + * Send sends the specified message to the client's channel (if not discarded). + */ + send(m: Message): void + } + /** + * Message defines a client's channel data. + */ + interface Message { + name: string + data: string|Array + } + interface Message { + /** + * WriteSSE writes the current message in a SSE format into the provided writer. + * + * For example, writing to a router.Event: + * + * ``` + * m := Message{Name: "users/create", Data: []byte{...}} + * m.WriteSSE(e.Response, "yourEventId") + * e.Flush() + * ``` + */ + writeSSE(w: io.Writer, eventId: string): void + } +} + namespace sync { // @ts-ignore import isync = sync @@ -22069,270 +22086,6 @@ namespace io { } } -namespace bufio { - /** - * Reader implements buffering for an io.Reader object. - * A new Reader is created by calling [NewReader] or [NewReaderSize]; - * alternatively the zero value of a Reader may be used after calling [Reset] - * on it. - */ - interface Reader { - } - interface Reader { - /** - * Size returns the size of the underlying buffer in bytes. - */ - size(): number - } - interface Reader { - /** - * Reset discards any buffered data, resets all state, and switches - * the buffered reader to read from r. - * Calling Reset on the zero value of [Reader] initializes the internal buffer - * to the default size. - * Calling b.Reset(b) (that is, resetting a [Reader] to itself) does nothing. - */ - reset(r: io.Reader): void - } - interface Reader { - /** - * Peek returns the next n bytes without advancing the reader. The bytes stop - * being valid at the next read call. If necessary, Peek will read more bytes - * into the buffer in order to make n bytes available. If Peek returns fewer - * than n bytes, it also returns an error explaining why the read is short. - * The error is [ErrBufferFull] if n is larger than b's buffer size. - * - * Calling Peek prevents a [Reader.UnreadByte] or [Reader.UnreadRune] call from succeeding - * until the next read operation. - */ - peek(n: number): string|Array - } - interface Reader { - /** - * Discard skips the next n bytes, returning the number of bytes discarded. - * - * If Discard skips fewer than n bytes, it also returns an error. - * If 0 <= n <= b.Buffered(), Discard is guaranteed to succeed without - * reading from the underlying io.Reader. - */ - discard(n: number): number - } - interface Reader { - /** - * Read reads data into p. - * It returns the number of bytes read into p. - * The bytes are taken from at most one Read on the underlying [Reader], - * hence n may be less than len(p). - * To read exactly len(p) bytes, use io.ReadFull(b, p). - * If the underlying [Reader] can return a non-zero count with io.EOF, - * then this Read method can do so as well; see the [io.Reader] docs. - */ - read(p: string|Array): number - } - interface Reader { - /** - * ReadByte reads and returns a single byte. - * If no byte is available, returns an error. - */ - readByte(): number - } - interface Reader { - /** - * UnreadByte unreads the last byte. Only the most recently read byte can be unread. - * - * UnreadByte returns an error if the most recent method called on the - * [Reader] was not a read operation. Notably, [Reader.Peek], [Reader.Discard], and [Reader.WriteTo] are not - * considered read operations. - */ - unreadByte(): void - } - interface Reader { - /** - * ReadRune reads a single UTF-8 encoded Unicode character and returns the - * rune and its size in bytes. If the encoded rune is invalid, it consumes one byte - * and returns unicode.ReplacementChar (U+FFFD) with a size of 1. - */ - readRune(): [number, number] - } - interface Reader { - /** - * UnreadRune unreads the last rune. If the most recent method called on - * the [Reader] was not a [Reader.ReadRune], [Reader.UnreadRune] returns an error. (In this - * regard it is stricter than [Reader.UnreadByte], which will unread the last byte - * from any read operation.) - */ - unreadRune(): void - } - interface Reader { - /** - * Buffered returns the number of bytes that can be read from the current buffer. - */ - buffered(): number - } - interface Reader { - /** - * ReadSlice reads until the first occurrence of delim in the input, - * returning a slice pointing at the bytes in the buffer. - * The bytes stop being valid at the next read. - * If ReadSlice encounters an error before finding a delimiter, - * it returns all the data in the buffer and the error itself (often io.EOF). - * ReadSlice fails with error [ErrBufferFull] if the buffer fills without a delim. - * Because the data returned from ReadSlice will be overwritten - * by the next I/O operation, most clients should use - * [Reader.ReadBytes] or ReadString instead. - * ReadSlice returns err != nil if and only if line does not end in delim. - */ - readSlice(delim: number): string|Array - } - interface Reader { - /** - * ReadLine is a low-level line-reading primitive. Most callers should use - * [Reader.ReadBytes]('\n') or [Reader.ReadString]('\n') instead or use a [Scanner]. - * - * ReadLine tries to return a single line, not including the end-of-line bytes. - * If the line was too long for the buffer then isPrefix is set and the - * beginning of the line is returned. The rest of the line will be returned - * from future calls. isPrefix will be false when returning the last fragment - * of the line. The returned buffer is only valid until the next call to - * ReadLine. ReadLine either returns a non-nil line or it returns an error, - * never both. - * - * The text returned from ReadLine does not include the line end ("\r\n" or "\n"). - * No indication or error is given if the input ends without a final line end. - * Calling [Reader.UnreadByte] after ReadLine will always unread the last byte read - * (possibly a character belonging to the line end) even if that byte is not - * part of the line returned by ReadLine. - */ - readLine(): [string|Array, boolean] - } - interface Reader { - /** - * ReadBytes reads until the first occurrence of delim in the input, - * returning a slice containing the data up to and including the delimiter. - * If ReadBytes encounters an error before finding a delimiter, - * it returns the data read before the error and the error itself (often io.EOF). - * ReadBytes returns err != nil if and only if the returned data does not end in - * delim. - * For simple uses, a Scanner may be more convenient. - */ - readBytes(delim: number): string|Array - } - interface Reader { - /** - * ReadString reads until the first occurrence of delim in the input, - * returning a string containing the data up to and including the delimiter. - * If ReadString encounters an error before finding a delimiter, - * it returns the data read before the error and the error itself (often io.EOF). - * ReadString returns err != nil if and only if the returned data does not end in - * delim. - * For simple uses, a Scanner may be more convenient. - */ - readString(delim: number): string - } - interface Reader { - /** - * WriteTo implements io.WriterTo. - * This may make multiple calls to the [Reader.Read] method of the underlying [Reader]. - * If the underlying reader supports the [Reader.WriteTo] method, - * this calls the underlying [Reader.WriteTo] without buffering. - */ - writeTo(w: io.Writer): number - } - /** - * Writer implements buffering for an [io.Writer] object. - * If an error occurs writing to a [Writer], no more data will be - * accepted and all subsequent writes, and [Writer.Flush], will return the error. - * After all data has been written, the client should call the - * [Writer.Flush] method to guarantee all data has been forwarded to - * the underlying [io.Writer]. - */ - interface Writer { - } - interface Writer { - /** - * Size returns the size of the underlying buffer in bytes. - */ - size(): number - } - interface Writer { - /** - * Reset discards any unflushed buffered data, clears any error, and - * resets b to write its output to w. - * Calling Reset on the zero value of [Writer] initializes the internal buffer - * to the default size. - * Calling w.Reset(w) (that is, resetting a [Writer] to itself) does nothing. - */ - reset(w: io.Writer): void - } - interface Writer { - /** - * Flush writes any buffered data to the underlying [io.Writer]. - */ - flush(): void - } - interface Writer { - /** - * Available returns how many bytes are unused in the buffer. - */ - available(): number - } - interface Writer { - /** - * AvailableBuffer returns an empty buffer with b.Available() capacity. - * This buffer is intended to be appended to and - * passed to an immediately succeeding [Writer.Write] call. - * The buffer is only valid until the next write operation on b. - */ - availableBuffer(): string|Array - } - interface Writer { - /** - * Buffered returns the number of bytes that have been written into the current buffer. - */ - buffered(): number - } - interface Writer { - /** - * Write writes the contents of p into the buffer. - * It returns the number of bytes written. - * If nn < len(p), it also returns an error explaining - * why the write is short. - */ - write(p: string|Array): number - } - interface Writer { - /** - * WriteByte writes a single byte. - */ - writeByte(c: number): void - } - interface Writer { - /** - * WriteRune writes a single Unicode code point, returning - * the number of bytes written and any error. - */ - writeRune(r: number): number - } - interface Writer { - /** - * WriteString writes a string. - * It returns the number of bytes written. - * If the count is less than len(s), it also returns an error explaining - * why the write is short. - */ - writeString(s: string): number - } - interface Writer { - /** - * ReadFrom implements [io.ReaderFrom]. If the underlying writer - * supports the ReadFrom method, this calls the underlying ReadFrom. - * If there is buffered data and an underlying ReadFrom, this fills - * the buffer and writes it before calling ReadFrom. - */ - readFrom(r: io.Reader): number - } -} - namespace syscall { // @ts-ignore import errpkg = errors @@ -22627,6 +22380,287 @@ namespace sql { } } +namespace bufio { + /** + * Reader implements buffering for an io.Reader object. + * A new Reader is created by calling [NewReader] or [NewReaderSize]; + * alternatively the zero value of a Reader may be used after calling [Reset] + * on it. + */ + interface Reader { + } + interface Reader { + /** + * Size returns the size of the underlying buffer in bytes. + */ + size(): number + } + interface Reader { + /** + * Reset discards any buffered data, resets all state, and switches + * the buffered reader to read from r. + * Calling Reset on the zero value of [Reader] initializes the internal buffer + * to the default size. + * Calling b.Reset(b) (that is, resetting a [Reader] to itself) does nothing. + */ + reset(r: io.Reader): void + } + interface Reader { + /** + * Peek returns the next n bytes without advancing the reader. The bytes stop + * being valid at the next read call. If necessary, Peek will read more bytes + * into the buffer in order to make n bytes available. If Peek returns fewer + * than n bytes, it also returns an error explaining why the read is short. + * The error is [ErrBufferFull] if n is larger than b's buffer size. + * + * Calling Peek prevents a [Reader.UnreadByte] or [Reader.UnreadRune] call from succeeding + * until the next read operation. + */ + peek(n: number): string|Array + } + interface Reader { + /** + * Discard skips the next n bytes, returning the number of bytes discarded. + * + * If Discard skips fewer than n bytes, it also returns an error. + * If 0 <= n <= b.Buffered(), Discard is guaranteed to succeed without + * reading from the underlying io.Reader. + */ + discard(n: number): number + } + interface Reader { + /** + * Read reads data into p. + * It returns the number of bytes read into p. + * The bytes are taken from at most one Read on the underlying [Reader], + * hence n may be less than len(p). + * To read exactly len(p) bytes, use io.ReadFull(b, p). + * If the underlying [Reader] can return a non-zero count with io.EOF, + * then this Read method can do so as well; see the [io.Reader] docs. + */ + read(p: string|Array): number + } + interface Reader { + /** + * ReadByte reads and returns a single byte. + * If no byte is available, returns an error. + */ + readByte(): number + } + interface Reader { + /** + * UnreadByte unreads the last byte. Only the most recently read byte can be unread. + * + * UnreadByte returns an error if the most recent method called on the + * [Reader] was not a read operation. Notably, [Reader.Peek], [Reader.Discard], and [Reader.WriteTo] are not + * considered read operations. + */ + unreadByte(): void + } + interface Reader { + /** + * ReadRune reads a single UTF-8 encoded Unicode character and returns the + * rune and its size in bytes. If the encoded rune is invalid, it consumes one byte + * and returns unicode.ReplacementChar (U+FFFD) with a size of 1. + */ + readRune(): [number, number] + } + interface Reader { + /** + * UnreadRune unreads the last rune. If the most recent method called on + * the [Reader] was not a [Reader.ReadRune], [Reader.UnreadRune] returns an error. (In this + * regard it is stricter than [Reader.UnreadByte], which will unread the last byte + * from any read operation.) + */ + unreadRune(): void + } + interface Reader { + /** + * Buffered returns the number of bytes that can be read from the current buffer. + */ + buffered(): number + } + interface Reader { + /** + * ReadSlice reads until the first occurrence of delim in the input, + * returning a slice pointing at the bytes in the buffer. + * The bytes stop being valid at the next read. + * If ReadSlice encounters an error before finding a delimiter, + * it returns all the data in the buffer and the error itself (often io.EOF). + * ReadSlice fails with error [ErrBufferFull] if the buffer fills without a delim. + * Because the data returned from ReadSlice will be overwritten + * by the next I/O operation, most clients should use + * [Reader.ReadBytes] or ReadString instead. + * ReadSlice returns err != nil if and only if line does not end in delim. + */ + readSlice(delim: number): string|Array + } + interface Reader { + /** + * ReadLine is a low-level line-reading primitive. Most callers should use + * [Reader.ReadBytes]('\n') or [Reader.ReadString]('\n') instead or use a [Scanner]. + * + * ReadLine tries to return a single line, not including the end-of-line bytes. + * If the line was too long for the buffer then isPrefix is set and the + * beginning of the line is returned. The rest of the line will be returned + * from future calls. isPrefix will be false when returning the last fragment + * of the line. The returned buffer is only valid until the next call to + * ReadLine. ReadLine either returns a non-nil line or it returns an error, + * never both. + * + * The text returned from ReadLine does not include the line end ("\r\n" or "\n"). + * No indication or error is given if the input ends without a final line end. + * Calling [Reader.UnreadByte] after ReadLine will always unread the last byte read + * (possibly a character belonging to the line end) even if that byte is not + * part of the line returned by ReadLine. + */ + readLine(): [string|Array, boolean] + } + interface Reader { + /** + * ReadBytes reads until the first occurrence of delim in the input, + * returning a slice containing the data up to and including the delimiter. + * If ReadBytes encounters an error before finding a delimiter, + * it returns the data read before the error and the error itself (often io.EOF). + * ReadBytes returns err != nil if and only if the returned data does not end in + * delim. + * For simple uses, a Scanner may be more convenient. + */ + readBytes(delim: number): string|Array + } + interface Reader { + /** + * ReadString reads until the first occurrence of delim in the input, + * returning a string containing the data up to and including the delimiter. + * If ReadString encounters an error before finding a delimiter, + * it returns the data read before the error and the error itself (often io.EOF). + * ReadString returns err != nil if and only if the returned data does not end in + * delim. + * For simple uses, a Scanner may be more convenient. + */ + readString(delim: number): string + } + interface Reader { + /** + * WriteTo implements io.WriterTo. + * This may make multiple calls to the [Reader.Read] method of the underlying [Reader]. + * If the underlying reader supports the [Reader.WriteTo] method, + * this calls the underlying [Reader.WriteTo] without buffering. + */ + writeTo(w: io.Writer): number + } + /** + * Writer implements buffering for an [io.Writer] object. + * If an error occurs writing to a [Writer], no more data will be + * accepted and all subsequent writes, and [Writer.Flush], will return the error. + * After all data has been written, the client should call the + * [Writer.Flush] method to guarantee all data has been forwarded to + * the underlying [io.Writer]. + */ + interface Writer { + } + interface Writer { + /** + * Size returns the size of the underlying buffer in bytes. + */ + size(): number + } + interface Writer { + /** + * Reset discards any unflushed buffered data, clears any error, and + * resets b to write its output to w. + * Calling Reset on the zero value of [Writer] initializes the internal buffer + * to the default size. + * Calling w.Reset(w) (that is, resetting a [Writer] to itself) does nothing. + */ + reset(w: io.Writer): void + } + interface Writer { + /** + * Flush writes any buffered data to the underlying [io.Writer]. + */ + flush(): void + } + interface Writer { + /** + * Available returns how many bytes are unused in the buffer. + */ + available(): number + } + interface Writer { + /** + * AvailableBuffer returns an empty buffer with b.Available() capacity. + * This buffer is intended to be appended to and + * passed to an immediately succeeding [Writer.Write] call. + * The buffer is only valid until the next write operation on b. + */ + availableBuffer(): string|Array + } + interface Writer { + /** + * Buffered returns the number of bytes that have been written into the current buffer. + */ + buffered(): number + } + interface Writer { + /** + * Write writes the contents of p into the buffer. + * It returns the number of bytes written. + * If nn < len(p), it also returns an error explaining + * why the write is short. + */ + write(p: string|Array): number + } + interface Writer { + /** + * WriteByte writes a single byte. + */ + writeByte(c: number): void + } + interface Writer { + /** + * WriteRune writes a single Unicode code point, returning + * the number of bytes written and any error. + */ + writeRune(r: number): number + } + interface Writer { + /** + * WriteString writes a string. + * It returns the number of bytes written. + * If the count is less than len(s), it also returns an error explaining + * why the write is short. + */ + writeString(s: string): number + } + interface Writer { + /** + * ReadFrom implements [io.ReaderFrom]. If the underlying writer + * supports the ReadFrom method, this calls the underlying ReadFrom. + * If there is buffered data and an underlying ReadFrom, this fills + * the buffer and writes it before calling ReadFrom. + */ + readFrom(r: io.Reader): number + } +} + +namespace net { + /** + * Addr represents a network end point address. + * + * The two methods [Addr.Network] and [Addr.String] conventionally return strings + * that can be passed as the arguments to [Dial], but the exact form + * and meaning of the strings is up to the implementation. + */ + interface Addr { + [key:string]: any; + network(): string // name of the network (for example, "tcp", "udp") + string(): string // string form of address (for example, "192.0.2.1:25", "[2001:db8::1]:80") + } + // @ts-ignore + import _cgopackage = cgo +} + /** * Package url parses URLs and implements query escaping. * @@ -22872,23 +22906,6 @@ namespace url { } } -namespace net { - /** - * Addr represents a network end point address. - * - * The two methods [Addr.Network] and [Addr.String] conventionally return strings - * that can be passed as the arguments to [Dial], but the exact form - * and meaning of the strings is up to the implementation. - */ - interface Addr { - [key:string]: any; - network(): string // name of the network (for example, "tcp", "udp") - string(): string // string form of address (for example, "192.0.2.1:25", "[2001:db8::1]:80") - } - // @ts-ignore - import _cgopackage = cgo -} - /** * Package textproto implements generic support for text-based request/response * protocols in the style of HTTP, NNTP, and SMTP. @@ -23454,8 +23471,8 @@ namespace jwt { * NumericDate represents a JSON numeric date value, as referenced at * https://datatracker.ietf.org/doc/html/rfc7519#section-2. */ - type _swKzxwa = time.Time - interface NumericDate extends _swKzxwa { + type _sdeDNVa = time.Time + interface NumericDate extends _sdeDNVa { } interface NumericDate { /** @@ -23487,15 +23504,292 @@ namespace jwt { } } +namespace subscriptions { +} + +/** + * Package oauth2 provides support for making + * OAuth2 authorized and authenticated HTTP requests, + * as specified in RFC 6749. + * It can additionally grant authorization with Bearer JWT. + */ +namespace oauth2 { + /** + * An AuthCodeOption is passed to Config.AuthCodeURL. + */ + interface AuthCodeOption { + [key:string]: any; + } + /** + * Token represents the credentials used to authorize + * the requests to access protected resources on the OAuth 2.0 + * provider's backend. + * + * Most users of this package should not access fields of Token + * directly. They're exported mostly for use by related packages + * implementing derivative OAuth2 flows. + */ + interface Token { + /** + * AccessToken is the token that authorizes and authenticates + * the requests. + */ + accessToken: string + /** + * TokenType is the type of token. + * The Type method returns either this or "Bearer", the default. + */ + tokenType: string + /** + * RefreshToken is a token that's used by the application + * (as opposed to the user) to refresh the access token + * if it expires. + */ + refreshToken: string + /** + * Expiry is the optional expiration time of the access token. + * + * If zero, [TokenSource] implementations will reuse the same + * token forever and RefreshToken or equivalent + * mechanisms for that TokenSource will not be used. + */ + expiry: time.Time + /** + * ExpiresIn is the OAuth2 wire format "expires_in" field, + * which specifies how many seconds later the token expires, + * relative to an unknown time base approximately around "now". + * It is the application's responsibility to populate + * `Expiry` from `ExpiresIn` when required. + */ + expiresIn: number + } + interface Token { + /** + * Type returns t.TokenType if non-empty, else "Bearer". + */ + type(): string + } + interface Token { + /** + * SetAuthHeader sets the Authorization header to r using the access + * token in t. + * + * This method is unnecessary when using [Transport] or an HTTP Client + * returned by this package. + */ + setAuthHeader(r: http.Request): void + } + interface Token { + /** + * WithExtra returns a new [Token] that's a clone of t, but using the + * provided raw extra map. This is only intended for use by packages + * implementing derivative OAuth2 flows. + */ + withExtra(extra: any): (Token) + } + interface Token { + /** + * Extra returns an extra field. + * Extra fields are key-value pairs returned by the server as + * part of the token retrieval response. + */ + extra(key: string): any + } + interface Token { + /** + * Valid reports whether t is non-nil, has an AccessToken, and is not expired. + */ + valid(): boolean + } +} + namespace hook { /** * wrapped local Hook embedded struct to limit the public API surface. */ - type _smPhukB = Hook - interface mainHook extends _smPhukB { + type _sUihVaQ = Hook + interface mainHook extends _sUihVaQ { } } +namespace slog { + /** + * An Attr is a key-value pair. + */ + interface Attr { + key: string + value: Value + } + interface Attr { + /** + * Equal reports whether a and b have equal keys and values. + */ + equal(b: Attr): boolean + } + interface Attr { + string(): string + } + /** + * A Handler handles log records produced by a Logger. + * + * A typical handler may print log records to standard error, + * or write them to a file or database, or perhaps augment them + * with additional attributes and pass them on to another handler. + * + * Any of the Handler's methods may be called concurrently with itself + * or with other methods. It is the responsibility of the Handler to + * manage this concurrency. + * + * Users of the slog package should not invoke Handler methods directly. + * They should use the methods of [Logger] instead. + * + * Before implementing your own handler, consult https://go.dev/s/slog-handler-guide. + */ + interface Handler { + [key:string]: any; + /** + * Enabled reports whether the handler handles records at the given level. + * The handler ignores records whose level is lower. + * It is called early, before any arguments are processed, + * to save effort if the log event should be discarded. + * If called from a Logger method, the first argument is the context + * passed to that method, or context.Background() if nil was passed + * or the method does not take a context. + * The context is passed so Enabled can use its values + * to make a decision. + */ + enabled(_arg0: context.Context, _arg1: Level): boolean + /** + * Handle handles the Record. + * It will only be called when Enabled returns true. + * The Context argument is as for Enabled. + * It is present solely to provide Handlers access to the context's values. + * Canceling the context should not affect record processing. + * (Among other things, log messages may be necessary to debug a + * cancellation-related problem.) + * + * Handle methods that produce output should observe the following rules: + * ``` + * - If r.Time is the zero time, ignore the time. + * - If r.PC is zero, ignore it. + * - Attr's values should be resolved. + * - If an Attr's key and value are both the zero value, ignore the Attr. + * This can be tested with attr.Equal(Attr{}). + * - If a group's key is empty, inline the group's Attrs. + * - If a group has no Attrs (even if it has a non-empty key), + * ignore it. + * ``` + * + * [Logger] discards any errors from Handle. Wrap the Handle method to + * process any errors from Handlers. + */ + handle(_arg0: context.Context, _arg1: Record): void + /** + * WithAttrs returns a new Handler whose attributes consist of + * both the receiver's attributes and the arguments. + * The Handler owns the slice: it may retain, modify or discard it. + */ + withAttrs(attrs: Array): Handler + /** + * WithGroup returns a new Handler with the given group appended to + * the receiver's existing groups. + * The keys of all subsequent attributes, whether added by With or in a + * Record, should be qualified by the sequence of group names. + * + * How this qualification happens is up to the Handler, so long as + * this Handler's attribute keys differ from those of another Handler + * with a different sequence of group names. + * + * A Handler should treat WithGroup as starting a Group of Attrs that ends + * at the end of the log event. That is, + * + * ``` + * logger.WithGroup("s").LogAttrs(ctx, level, msg, slog.Int("a", 1), slog.Int("b", 2)) + * ``` + * + * should behave like + * + * ``` + * logger.LogAttrs(ctx, level, msg, slog.Group("s", slog.Int("a", 1), slog.Int("b", 2))) + * ``` + * + * If the name is empty, WithGroup returns the receiver. + */ + withGroup(name: string): Handler + } + /** + * A Level is the importance or severity of a log event. + * The higher the level, the more important or severe the event. + */ + interface Level extends Number{} + interface Level { + /** + * String returns a name for the level. + * If the level has a name, then that name + * in uppercase is returned. + * If the level is between named values, then + * an integer is appended to the uppercased name. + * Examples: + * + * ``` + * LevelWarn.String() => "WARN" + * (LevelInfo+2).String() => "INFO+2" + * ``` + */ + string(): string + } + interface Level { + /** + * MarshalJSON implements [encoding/json.Marshaler] + * by quoting the output of [Level.String]. + */ + marshalJSON(): string|Array + } + interface Level { + /** + * UnmarshalJSON implements [encoding/json.Unmarshaler] + * It accepts any string produced by [Level.MarshalJSON], + * ignoring case. + * It also accepts numeric offsets that would result in a different string on + * output. For example, "Error-8" would marshal as "INFO". + */ + unmarshalJSON(data: string|Array): void + } + interface Level { + /** + * AppendText implements [encoding.TextAppender] + * by calling [Level.String]. + */ + appendText(b: string|Array): string|Array + } + interface Level { + /** + * MarshalText implements [encoding.TextMarshaler] + * by calling [Level.AppendText]. + */ + marshalText(): string|Array + } + interface Level { + /** + * UnmarshalText implements [encoding.TextUnmarshaler]. + * It accepts any string produced by [Level.MarshalText], + * ignoring case. + * It also accepts numeric offsets that would result in a different string on + * output. For example, "Error-8" would marshal as "INFO". + */ + unmarshalText(data: string|Array): void + } + interface Level { + /** + * Level returns the receiver. + * It implements [Leveler]. + */ + level(): Level + } + // @ts-ignore + import loginternal = internal +} + namespace types { } @@ -23755,281 +24049,154 @@ namespace cobra { interface CompletionFunc {(cmd: Command, args: Array, toComplete: string): [Array, ShellCompDirective] } } -namespace subscriptions { -} - -/** - * Package oauth2 provides support for making - * OAuth2 authorized and authenticated HTTP requests, - * as specified in RFC 6749. - * It can additionally grant authorization with Bearer JWT. - */ -namespace oauth2 { +namespace url { /** - * An AuthCodeOption is passed to Config.AuthCodeURL. + * The Userinfo type is an immutable encapsulation of username and + * password details for a [URL]. An existing Userinfo value is guaranteed + * to have a username set (potentially empty, as allowed by RFC 2396), + * and optionally a password. */ - interface AuthCodeOption { - [key:string]: any; + interface Userinfo { } - /** - * Token represents the credentials used to authorize - * the requests to access protected resources on the OAuth 2.0 - * provider's backend. - * - * Most users of this package should not access fields of Token - * directly. They're exported mostly for use by related packages - * implementing derivative OAuth2 flows. - */ - interface Token { + interface Userinfo { /** - * AccessToken is the token that authorizes and authenticates - * the requests. + * Username returns the username. */ - accessToken: string - /** - * TokenType is the type of token. - * The Type method returns either this or "Bearer", the default. - */ - tokenType: string - /** - * RefreshToken is a token that's used by the application - * (as opposed to the user) to refresh the access token - * if it expires. - */ - refreshToken: string - /** - * Expiry is the optional expiration time of the access token. - * - * If zero, [TokenSource] implementations will reuse the same - * token forever and RefreshToken or equivalent - * mechanisms for that TokenSource will not be used. - */ - expiry: time.Time - /** - * ExpiresIn is the OAuth2 wire format "expires_in" field, - * which specifies how many seconds later the token expires, - * relative to an unknown time base approximately around "now". - * It is the application's responsibility to populate - * `Expiry` from `ExpiresIn` when required. - */ - expiresIn: number + username(): string } - interface Token { + interface Userinfo { /** - * Type returns t.TokenType if non-empty, else "Bearer". + * Password returns the password in case it is set, and whether it is set. */ - type(): string + password(): [string, boolean] } - interface Token { + interface Userinfo { /** - * SetAuthHeader sets the Authorization header to r using the access - * token in t. - * - * This method is unnecessary when using [Transport] or an HTTP Client - * returned by this package. - */ - setAuthHeader(r: http.Request): void - } - interface Token { - /** - * WithExtra returns a new [Token] that's a clone of t, but using the - * provided raw extra map. This is only intended for use by packages - * implementing derivative OAuth2 flows. - */ - withExtra(extra: any): (Token) - } - interface Token { - /** - * Extra returns an extra field. - * Extra fields are key-value pairs returned by the server as - * part of the token retrieval response. - */ - extra(key: string): any - } - interface Token { - /** - * Valid reports whether t is non-nil, has an AccessToken, and is not expired. - */ - valid(): boolean - } -} - -namespace slog { - /** - * An Attr is a key-value pair. - */ - interface Attr { - key: string - value: Value - } - interface Attr { - /** - * Equal reports whether a and b have equal keys and values. - */ - equal(b: Attr): boolean - } - interface Attr { - string(): string - } - /** - * A Handler handles log records produced by a Logger. - * - * A typical handler may print log records to standard error, - * or write them to a file or database, or perhaps augment them - * with additional attributes and pass them on to another handler. - * - * Any of the Handler's methods may be called concurrently with itself - * or with other methods. It is the responsibility of the Handler to - * manage this concurrency. - * - * Users of the slog package should not invoke Handler methods directly. - * They should use the methods of [Logger] instead. - * - * Before implementing your own handler, consult https://go.dev/s/slog-handler-guide. - */ - interface Handler { - [key:string]: any; - /** - * Enabled reports whether the handler handles records at the given level. - * The handler ignores records whose level is lower. - * It is called early, before any arguments are processed, - * to save effort if the log event should be discarded. - * If called from a Logger method, the first argument is the context - * passed to that method, or context.Background() if nil was passed - * or the method does not take a context. - * The context is passed so Enabled can use its values - * to make a decision. - */ - enabled(_arg0: context.Context, _arg1: Level): boolean - /** - * Handle handles the Record. - * It will only be called when Enabled returns true. - * The Context argument is as for Enabled. - * It is present solely to provide Handlers access to the context's values. - * Canceling the context should not affect record processing. - * (Among other things, log messages may be necessary to debug a - * cancellation-related problem.) - * - * Handle methods that produce output should observe the following rules: - * ``` - * - If r.Time is the zero time, ignore the time. - * - If r.PC is zero, ignore it. - * - Attr's values should be resolved. - * - If an Attr's key and value are both the zero value, ignore the Attr. - * This can be tested with attr.Equal(Attr{}). - * - If a group's key is empty, inline the group's Attrs. - * - If a group has no Attrs (even if it has a non-empty key), - * ignore it. - * ``` - * - * [Logger] discards any errors from Handle. Wrap the Handle method to - * process any errors from Handlers. - */ - handle(_arg0: context.Context, _arg1: Record): void - /** - * WithAttrs returns a new Handler whose attributes consist of - * both the receiver's attributes and the arguments. - * The Handler owns the slice: it may retain, modify or discard it. - */ - withAttrs(attrs: Array): Handler - /** - * WithGroup returns a new Handler with the given group appended to - * the receiver's existing groups. - * The keys of all subsequent attributes, whether added by With or in a - * Record, should be qualified by the sequence of group names. - * - * How this qualification happens is up to the Handler, so long as - * this Handler's attribute keys differ from those of another Handler - * with a different sequence of group names. - * - * A Handler should treat WithGroup as starting a Group of Attrs that ends - * at the end of the log event. That is, - * - * ``` - * logger.WithGroup("s").LogAttrs(ctx, level, msg, slog.Int("a", 1), slog.Int("b", 2)) - * ``` - * - * should behave like - * - * ``` - * logger.LogAttrs(ctx, level, msg, slog.Group("s", slog.Int("a", 1), slog.Int("b", 2))) - * ``` - * - * If the name is empty, WithGroup returns the receiver. - */ - withGroup(name: string): Handler - } - /** - * A Level is the importance or severity of a log event. - * The higher the level, the more important or severe the event. - */ - interface Level extends Number{} - interface Level { - /** - * String returns a name for the level. - * If the level has a name, then that name - * in uppercase is returned. - * If the level is between named values, then - * an integer is appended to the uppercased name. - * Examples: - * - * ``` - * LevelWarn.String() => "WARN" - * (LevelInfo+2).String() => "INFO+2" - * ``` + * String returns the encoded userinfo information in the standard form + * of "username[:password]". */ string(): string } - interface Level { +} + +namespace multipart { + /** + * A Part represents a single part in a multipart body. + */ + interface Part { /** - * MarshalJSON implements [encoding/json.Marshaler] - * by quoting the output of [Level.String]. + * The headers of the body, if any, with the keys canonicalized + * in the same fashion that the Go http.Request headers are. + * For example, "foo-bar" changes case to "Foo-Bar" */ - marshalJSON(): string|Array + header: textproto.MIMEHeader } - interface Level { + interface Part { /** - * UnmarshalJSON implements [encoding/json.Unmarshaler] - * It accepts any string produced by [Level.MarshalJSON], - * ignoring case. - * It also accepts numeric offsets that would result in a different string on - * output. For example, "Error-8" would marshal as "INFO". + * FormName returns the name parameter if p has a Content-Disposition + * of type "form-data". Otherwise it returns the empty string. */ - unmarshalJSON(data: string|Array): void + formName(): string } - interface Level { + interface Part { /** - * AppendText implements [encoding.TextAppender] - * by calling [Level.String]. + * FileName returns the filename parameter of the [Part]'s Content-Disposition + * header. If not empty, the filename is passed through filepath.Base (which is + * platform dependent) before being returned. */ - appendText(b: string|Array): string|Array + fileName(): string } - interface Level { + interface Part { /** - * MarshalText implements [encoding.TextMarshaler] - * by calling [Level.AppendText]. + * Read reads the body of a part, after its headers and before the + * next part (if any) begins. */ - marshalText(): string|Array + read(d: string|Array): number } - interface Level { - /** - * UnmarshalText implements [encoding.TextUnmarshaler]. - * It accepts any string produced by [Level.MarshalText], - * ignoring case. - * It also accepts numeric offsets that would result in a different string on - * output. For example, "Error-8" would marshal as "INFO". - */ - unmarshalText(data: string|Array): void - } - interface Level { - /** - * Level returns the receiver. - * It implements [Leveler]. - */ - level(): Level + interface Part { + close(): void } +} + +namespace http { + /** + * SameSite allows a server to define a cookie attribute making it impossible for + * the browser to send this cookie along with cross-site requests. The main + * goal is to mitigate the risk of cross-origin information leakage, and provide + * some protection against cross-site request forgery attacks. + * + * See https://tools.ietf.org/html/draft-ietf-httpbis-cookie-same-site-00 for details. + */ + interface SameSite extends Number{} // @ts-ignore - import loginternal = internal + import mathrand = rand + // @ts-ignore + import urlpkg = url +} + +namespace oauth2 { +} + +namespace search { + /** + * Join defines common fields required for a single SQL JOIN clause. + */ + interface Join { + tableName: string + tableAlias: string + on: dbx.Expression + } +} + +namespace router { + // @ts-ignore + import validation = ozzo_validation + interface Route { + action: (e: T) => void + method: string + path: string + middlewares: Array<(hook.Handler | undefined)> + } + interface Route { + /** + * BindFunc registers one or multiple middleware functions to the current route. + * + * The registered middleware functions are "anonymous" and with default priority, + * aka. executes in the order they were registered. + * + * If you need to specify a named middleware (ex. so that it can be removed) + * or middleware with custom exec prirority, use the [Route.Bind] method. + */ + bindFunc(...middlewareFuncs: ((e: T) => void)[]): (Route) + } + interface Route { + /** + * Bind registers one or multiple middleware handlers to the current route. + */ + bind(...middlewares: (hook.Handler | undefined)[]): (Route) + } + interface Route { + /** + * Unbind removes one or more middlewares with the specified id(s) from the current route. + * + * It also adds the removed middleware ids to an exclude list so that they could be skipped from + * the execution chain in case the middleware is registered in a parent group. + * + * Anonymous middlewares are considered non-removable, aka. this method + * does nothing if the middleware id is an empty string. + */ + unbind(...middlewareIds: string[]): (Route) + } +} + +namespace cobra { + // @ts-ignore + import flag = pflag + /** + * ShellCompDirective is a bit map representing the different behaviors the shell + * can be instructed to have once completions have been provided. + */ + interface ShellCompDirective extends Number{} } namespace slog { @@ -24212,154 +24379,9 @@ namespace slog { } } -namespace url { - /** - * The Userinfo type is an immutable encapsulation of username and - * password details for a [URL]. An existing Userinfo value is guaranteed - * to have a username set (potentially empty, as allowed by RFC 2396), - * and optionally a password. - */ - interface Userinfo { - } - interface Userinfo { - /** - * Username returns the username. - */ - username(): string - } - interface Userinfo { - /** - * Password returns the password in case it is set, and whether it is set. - */ - password(): [string, boolean] - } - interface Userinfo { - /** - * String returns the encoded userinfo information in the standard form - * of "username[:password]". - */ - string(): string - } -} - -namespace multipart { - /** - * A Part represents a single part in a multipart body. - */ - interface Part { - /** - * The headers of the body, if any, with the keys canonicalized - * in the same fashion that the Go http.Request headers are. - * For example, "foo-bar" changes case to "Foo-Bar" - */ - header: textproto.MIMEHeader - } - interface Part { - /** - * FormName returns the name parameter if p has a Content-Disposition - * of type "form-data". Otherwise it returns the empty string. - */ - formName(): string - } - interface Part { - /** - * FileName returns the filename parameter of the [Part]'s Content-Disposition - * header. If not empty, the filename is passed through filepath.Base (which is - * platform dependent) before being returned. - */ - fileName(): string - } - interface Part { - /** - * Read reads the body of a part, after its headers and before the - * next part (if any) begins. - */ - read(d: string|Array): number - } - interface Part { - close(): void - } -} - -namespace http { - /** - * SameSite allows a server to define a cookie attribute making it impossible for - * the browser to send this cookie along with cross-site requests. The main - * goal is to mitigate the risk of cross-origin information leakage, and provide - * some protection against cross-site request forgery attacks. - * - * See https://tools.ietf.org/html/draft-ietf-httpbis-cookie-same-site-00 for details. - */ - interface SameSite extends Number{} - // @ts-ignore - import mathrand = rand - // @ts-ignore - import urlpkg = url -} - -namespace search { - /** - * Join defines common fields required for a single SQL JOIN clause. - */ - interface Join { - tableName: string - tableAlias: string - on: dbx.Expression - } -} - namespace router { // @ts-ignore import validation = ozzo_validation - interface Route { - action: (e: T) => void - method: string - path: string - middlewares: Array<(hook.Handler | undefined)> - } - interface Route { - /** - * BindFunc registers one or multiple middleware functions to the current route. - * - * The registered middleware functions are "anonymous" and with default priority, - * aka. executes in the order they were registered. - * - * If you need to specify a named middleware (ex. so that it can be removed) - * or middleware with custom exec prirority, use the [Route.Bind] method. - */ - bindFunc(...middlewareFuncs: ((e: T) => void)[]): (Route) - } - interface Route { - /** - * Bind registers one or multiple middleware handlers to the current route. - */ - bind(...middlewares: (hook.Handler | undefined)[]): (Route) - } - interface Route { - /** - * Unbind removes one or more middlewares with the specified id(s) from the current route. - * - * It also adds the removed middleware ids to an exclude list so that they could be skipped from - * the execution chain in case the middleware is registered in a parent group. - * - * Anonymous middlewares are considered non-removable, aka. this method - * does nothing if the middleware id is an empty string. - */ - unbind(...middlewareIds: string[]): (Route) - } -} - -namespace cobra { - // @ts-ignore - import flag = pflag - /** - * ShellCompDirective is a bit map representing the different behaviors the shell - * can be instructed to have once completions have been provided. - */ - interface ShellCompDirective extends Number{} -} - -namespace oauth2 { } namespace slog { @@ -24400,8 +24422,3 @@ namespace slog { logValue(): Value } } - -namespace router { - // @ts-ignore - import validation = ozzo_validation -}