This should help alleviate races where the pod is not fully
cleaned up before subsequent API calls happen.
Signed-off-by: Matthew Heon <mheon@redhat.com>
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Commit 2b6dd3fb43 set the killmode of the podman.service to the
systemd default which ultimately lead to the problem that systemd
will kill *all* processes inside the unit's cgroup and hence kill
all containers whenever the service is stopped.
Fix it by setting the type to sdnotify and the killmode to process.
`podman system service` will send the necessary notify messages
when the NOTIFY_SOCKET is set and unset it right after to prevent
the backend and container runtimes from jumping in between and send
messages as well.
Fixes: #7294
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
even though the official documentation suggests that application/x-tar should be used for tar files, it seems docker-compose uses application/tar. we now accept them and issue a warning.
Fixes: #7185
Signed-off-by: Brent Baude <bbaude@redhat.com>
Listing images has shown increasing performance penalties with an
increasing number of images. Unless `--all` is specified, Podman
will filter intermediate images. Determining intermediate images
has been done by finding (and comparing!) parent images which is
expensive. We had to query the storage many times which turned it
into a bottleneck.
Instead, create a layer tree and assign one or more images to nodes that
match the images' top layer. Determining the children of an image is
now exponentially faster as we already know the child images from the
layer graph and the images using the same top layer, which may also be
considered child images based on their history.
On my system with 510 images, a rootful image list drops from 6 secs
down to 0.3 secs.
Also use the tree to compute parent nodes, and to filter intermediate
images for pruning.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add a `context.Context` to the log APIs to allow for cancelling
streaming (e.g., via `podman logs -f`). This fixes issues for
the remote API where some go routines of the server will continue
writing and produce nothing but heat and waste CPU cycles.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This patch fixes connection counters for v2 endpoints
Idletracker was moved to a new package to prevent package cycle.
Hijacking code still remains in wrong place and should be moved
later to isolated package
Signed-off-by: Sami Korhonen <skorhone@gmail.com>
After this patch v2 hijacking endpoints, exec/start and
containers/attach follow rfc 7230 specification.
Connection will only be upgraded, if client specifies upgrade
headers:
For tcp connections:
Connection: Upgrade
Upgrade: tcp
For unix socket connections:
Connection: Upgrade
Upgrade: sock
There are currently no checks if upgrade type actually matches with
available protocols. Implementation just protocol that client
requested
Signed-off-by: Sami Korhonen <skorhone@gmail.com>
StateHijacked is a terminal state. If hijacked connection
is registered as an active connection, connection will
never be unregistered. This causes two issues
First issue is that active connection counters are off.
Second issue is a resource leak caused by connection
object that is stored to a map.
After this patch hijacked connections are no longer
visible in counters. If a counter for hijacked
connections is required, podman must track
connections returned by Hijacker.Hijack()
It might make sense to develop abstraction layer for
hijacking - and move all hijacking related code to a
separate package. Hijacking code is prone to resource
leaks and it should be thoroughly tested.
Signed-off-by: Sami Korhonen <skorhone@gmail.com>
The versions Docker that the compat endpoints currently support are
using another type for the `filters` parameter than later versions
of Docker, which the libpod/events endpoint is also using.
To prevent existing deplopyments from breaking while still achieving
backward compat, we now support both types for the filters parameter.
Tested manually.
Fixes: #6899
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fix a potential panic in the events endpoint when parsing the filters
parameter. Values of the filters map might be empty, so we need to
account for that instead of uncondtitionally accessing the first item.
Also apply a similar for race conditions as done in commit f4a2d25c0f:
Fix a race that could cause read errors to be masked. Masking
such errors is likely to report red herrings since users don't
see that reading failed for some reasons but that a given event
could not be found.
Another race was the handler closing event channel, which could lead to
two kinds of panics: double close, send to close channel. The backend
takes care of that. However, make sure that the backend stops working
in case the context has been cancelled.
Fixes: #6899
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We need a umask of 0022 to ensure containers are created
correctly, but we set a different one prior to starting the
server (to ensure the unix socket has the right permissions).
Thus, we need to set the umask after the socket has been bound,
but before the server begins accepting requests.
Fixes#6787
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We weren't actually halting the goroutine that sent events, so it
would continue sending even when the channel closed (the most
notable cause being early hangup - e.g. Control-c on a curl
session). Use a context to cancel the events goroutine and stop
sending events.
Fixes#6805
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
github.com/containers/libpod/v2. The renaming of the imports
was done via gomove [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We have a flag, --syslog, for telling logrus to log to syslog as
well as to the terminal. Previously, this flag also set the exit
command for containers to use `--syslog` (otherwise all output
from exit commands is lost). I attempted to replicate this with
Podman v2.0, but quickly ran into circular import hell (the flag
is defined in cmd/podman, I needed it in cmd/podman/containers,
cmd/podman imports cmd/podman/containers already, etc). Instead,
let's just set the syslog flag automatically on
`--log-level=debug` so we log exit commands automatically when
debug-level logs are requested. This is consistent with Conmon
and seems to make sense.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The swagdoc in `register_volumes.go` already correctly notes that a 201
should be returned upon success, so we only need to change the handler
to match the spec.
Signed-off-by: Matt Brindley <58414429+maybe-sybr@users.noreply.github.com>
As part of APIv2 Attach, we need to be able to attach to freshly
created containers (in ContainerStateConfigured). This isn't
something Libpod is interested in supporting, so we use Init() to
get the container into ContainerStateCreated, in which attach is
possible. Problem: Init() will fail if dependencies are not
started, so a fresh container in a fresh pod will fail. The
simplest solution is to extend the existing recursive start code
from Start() to Init(), allowing dependency containers to be
started when we initialize the container (optionally, controlled
via bool).
Also, update some comments in container_api.go to make it more
clear how some of our major API calls work.
Fixes#6646
Signed-off-by: Matthew Heon <mheon@redhat.com>
This simply moves the function for the log handler for
APIv2 to a separate file to be consistent with other parts
of the code base.
Signed-off-by: jgallucci32 <john.gallucci.iv@gmail.com>
address problem when multiple -t were sent. and rework remote build's tarball if a context dir is given other than ".".
Fixes: #6578Fixes: #6577
Signed-off-by: Brent Baude <bbaude@redhat.com>
These were part of Podman v1.9, but were lost in the transition
to using Specgen to create containers. Most resource limits are
checked via the sysinfo package to ensure they are safe to use
(the cgroup is mounted, kernel support is present, etc) and
removed if not safe. Further, bounds checks are performed to
ensure that values are valid.
Ensure these warnings are printed client-side when they occur.
This part is a little bit gross, as it happens in pkg/infra and
not cmd/podman, which is largely down to how we implemented
`podman run` - all the work is done in pkg/infra and it returns
only once the container has exited, and we need warnings to print
*before* the container runs. The solution here, while inelegant,
avoid the need to extensively refactor our handling of run.
Should fix blkio-limit warnings that were identified by the FCOS
test suite.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Fix a lint error of an used parameter. The error must have sneaked in
with a PR that was merged after the recent linter enablement.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
--filter label=foo=bar, was been translated on the server side to
--filter label=foo --filter=bar
This PR fixes this back to what the user specified.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Adds some quick start up directions to the top of the
API v2 documentation and a few examples.
This strongly leverages comments from @jgallucci32 in #6535.
Fixes: #6535
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
