Allow users to commit containers into a single layer.
Usage
```bash
podman container commit --squash <name>
```
Signed-off-by: Aditya R <arajan@redhat.com>
Lot of clients are expecting proper `Content-type: application/json`
configured in response headers of `/build` compat api. Following commit
fixes that.
Fixes issues where code is setting header field after writing header
which is wrong. We must set `content-type` before we write and flush
http header.
Signed-off-by: Aditya R <arajan@redhat.com>
When we run rootless buildah needs to have IsolationOCIRootless set
otherwise it will run code which cannot be used as rootless user.
Podman should use the buildah default if possible and change it to
rootless mode if needed.
[NO NEW TESTS NEEDED] Should be covered by existing tests once we have
podman-remote rootless tests.
Fixes#12989
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This commit removes error message string from utils.Error in pkg/api.
Param was not used inside a function for quite a long time
[NO NEW TESTS NEEDED]
Signed-off-by: Jakub Guzik <jguzik@redhat.com>
`http:/host:port/images/load` fails to accept tar with more than one
images however manual load works as expected. Remove explicit check for
`1` image and only fail if result set has value less than `1`.
Signed-off-by: Aditya R <arajan@redhat.com>
[NO NEW TESTS NEEDED] This is just code cleanup.
The remote API has three different GetImages functions, which I believe
can be handled by just one function.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This option causes Podman to not only remove the specified containers
but all of the containers that depend on the specified
containers.
Fixes: https://github.com/containers/podman/issues/10360
Also ran codespell on the code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
For Status = "die", Docker sets the exit code of the container
to a field "exitCode". Podman uses "containerExitCode".
Copy the value into "exitCode" as well, for compatibility.
Signed-off-by: Leah Neukirchen <leah@vuxu.org>
Since #10168, on the event "died", the Status is set to "die"
for compatibility with the Docker API. Docker also sets
the field Action to "died", so do the same here.
Signed-off-by: Leah Neukirchen <leah@vuxu.org>
The swagger api docs used the extra Body struct as part of the request
which is wrong. We just want the plain type.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Network connect now supports setting a static ipv4, ipv6 and mac address
for the container network. The options are added to the cli and api.
Fixes#9883
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Almost every caller is using it only to wrap an error
in exactly the same way, so move that error context into GetCredentials
and simplify the users.
(The one other caller, build, was even wrapping the error incorrectly
talking about query parameters; so let it use the same text as the others.)
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
The Docker-compatible REST API has historically behaved just as the rest
of Podman and Buildah (and the atomic Docker in older RHEL/Fedora) where
`containers-registries.conf` is centrally controlling which registries
a short name may resolve to during pull or local image lookups. Please
refer to a blog for more details [1].
Docker, however, is only resolving short names to docker.io which has
been reported (see #12320) to break certain clients who rely on this
behavior. In order to support this scenario, `containers.conf(5)`
received a new option to control whether Podman's compat API resolves
to docker.io only or behaves as before.
Most endpoints allow for directly normalizing parameters that represent
an image. If set in containers.conf, Podman will then normalize the
references directly to docker.io. The build endpoint is an outlier
since images are also referenced in Dockerfiles. The Buildah API,
however, supports specifying a custom `types.SystemContext` in which
we can set a field that enforces short-name resolution to docker.io
in `c/image/pkg/shortnames`.
Notice that this a "hybrid" approach of doing the normalization directly
in the compat endpoints *and* in `pkg/shortnames` by passing a system
context. Doing such a hybrid approach is neccessary since the compat
and the libpod endpoints share the same `libimage.Runtime` which makes
a global enforcement via the `libimage.Runtime.systemContext`
impossible. Having two separate runtimes for the compat and the libpod
endpoints seems risky and not generally applicable to all endpoints.
[1] https://www.redhat.com/sysadmin/container-image-short-namesFixes: #12320
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Prevents temp secrets leaking into image by moving it away from context
directory to parent builder directory. Builder directory automatically
gets cleaned up when we are done with the build.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Podman remote must treat build secrets as part of context directory. If
secret path is absolute path on host copy it to tar file and pass it to
remote server.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Following commit makes sure that `build` api can accept external
secret and allows currently `NOOP` `podman-remote build -t tag
--secret id=mysecret,src=/path/on/remote` to become functional.
Just like `docker` following api is a hidden field and only exposed to
`podman-remote` but could document it if it needs exposed on `swagger`.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
In order to maintain compatiblity with `moby API` we must the field
`errorDetail` which is primary error reporting field with stream.
Currently podman is using `error` which is already deprecated by moby.
Check: https://github.com/moby/moby/blob/master/pkg/jsonmessage/jsonmessage.go#L147
[NO NEW TESTS NEEDED]
We can't test this in podman CI since we dont have a docker client.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Non-podman clients do not set `layers` while making request. This is
supposed to be `true` bydefault but `non-podman-clients i.e Docker` dont
know about this field as a result they end up setting this values to
`false`. Causing builds to never use cache for layers.
Adds compatiblity for `docker SDK`.
[NO NEW TESTS NEEDED]
Signed-off-by: Aditya Rajan <arajan@redhat.com>
There is a problem with creating and storing the exit command when the
container was created. It only contains the options the container was
created with but NOT the options the container is started with. One
example would be a CNI network config. If I start a container once, then
change the cni config dir with `--cni-config-dir` ans start it a second
time it will start successfully. However the exit command still contains
the wrong `--cni-config-dir` because it was not updated.
To fix this we do not want to store the exit command at all. Instead we
create it every time the conmon process for the container is startet.
This guarantees us that the container cleanup process is startet with
the correct settings.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Docker/Moby always create the working directory, and some tools
rely on that behavior (example, woodpecker/drone).
Fixes#11842
Signed-off-by: Michael Scherer <misc@redhat.com>
