When an image has no name/tag system df will
error because it tries to parse an empty name.
This commit makes sure we only parse non
empty names and set the repository and tag
to "<none>" otherwise.
Closes#7015
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
This matches Docker behavior, and will make the Docker frontend
work with `podman system service` (Docker tries to create, then
if that fails with 404 sends a request to pull the image).
Fixes#6960
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Podman is committed to inclusivity, a core value of open source. Historically, there have been technology terms that are problematic and divisive, and should be changed. We are currently taking time to audit our repository in order to eliminate such terminology, and replace it with more inclusive terms. We are starting where we can, with our own code, comments, and documentation. However, such terms may be used in dependencies, and must be used in our repositories at the current moment for compatibility. Podman will change these terms in our repo as soon as new and better terminology is available to us via our dependencies.
For more information: https://www.redhat.com/en/blog/making-open-source-more-inclusive-eradicating-problematic-language?sc_cid=701600000011gf0AAA
Signed-off-by: Ashley Cui <acui@redhat.com>
When creating a pod or container where a static MAC or IP address is provided, we should return a proper error and exit as 125.
Fixes: #6972
Signed-off-by: Brent Baude <bbaude@redhat.com>
As of podman 1.8.0, because of commit da7595a, the default approach of providing
port-forwarding in rootless mode has switched (and been hard-coded) to rootlessport,
for the purpose of providing super performance. The side-effect of this switch is
source within the container to the port-forwarded service always appears to originate
from 127.0.0.1 (see issue #5138).
This commit allows a user to specify if they want to revert to the previous approach
of leveraging slirp4netns add_hostfwd() api which, although not as stellar performance,
restores usefulness of seeing incoming traffic origin IP addresses.
The change should be transparent; when not specified, rootlessport will continue to be
used, however if specifying --net slirp4netns:slirplisten the old approach will be used.
Note: the above may imply the restored port-forwarding via slirp4netns is not as
performant as the new rootlessport approach, however the figures shared in the original
commit that introduced rootlessport are as follows:
slirp4netns: 8.3 Gbps,
RootlessKit: 27.3 Gbps,
which are more than sufficient for many use cases where the origin of traffic is more
important than limits that cannot be reached due to bottlenecks elsewhere.
Signed-off-by: Aleks Mariusz <m.k@alek.cx>
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This change prevents this exception when loading a pod spec
using the "IfNotPresent" pull policy:
Error: invalid pull type "IfNotPresent"
Signed-off-by: Tristan Cacqueray <tdecacqu@redhat.com>
We were only using the Command field in specgen when determining
whether to enable systemd if systemd=true (the default) was used.
This does not include the entrypoint, and does not include any
entrypoint/command sourced from the image - so an image could be
running systemd and we'd not correctly detect this. Using the
full, final command resolves this and matches Podman v1.9.x
behavior.
Fixes#6920
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
I confused STDIN and STDOUT's file descriptors (it's 0 and 1, I
thought they were 1 and 0). As such, we were looking at whether
we wanted to print STDIN when we looked to print STDOUT. This
bool was set when `-i` was set in at the `podman exec` command
line, which masked the problem when it was set.
Fixes#6890Fixes#6891Fixes#6892
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently we are sending over pids-limits from the user even if they
never modified the defaults. The pids limit should be set at the server
side unless modified by the user.
This issue has led to failures on systems that were running with cgroups V1.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In `podman inspect` output for containers and pods, we include
the command that was used to create the container. This is also
used by `podman generate systemd --new` to generate unit files.
With remote podman, the generated create commands were incorrect
since we sourced directly from os.Args on the server side, which
was guaranteed to be `podman system service` (or some variant
thereof). The solution is to pass the command along in the
Specgen or PodSpecgen, where we can source it from the client's
os.Args.
This will still be VERY iffy for mixed local/remote use (doing a
`podman --remote run ...` on a remote client then a
`podman generate systemd --new` on the server on the same
container will not work, because the `--remote` flag will slip
in) but at the very least the output of `podman inspect` will be
correct. We can look into properly handling `--remote` (parsing
it out would be a little iffy) in a future PR.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This patch fixes connection counters for v2 endpoints
Idletracker was moved to a new package to prevent package cycle.
Hijacking code still remains in wrong place and should be moved
later to isolated package
Signed-off-by: Sami Korhonen <skorhone@gmail.com>
After this patch v2 hijacking endpoints, exec/start and
containers/attach follow rfc 7230 specification.
Connection will only be upgraded, if client specifies upgrade
headers:
For tcp connections:
Connection: Upgrade
Upgrade: tcp
For unix socket connections:
Connection: Upgrade
Upgrade: sock
There are currently no checks if upgrade type actually matches with
available protocols. Implementation just protocol that client
requested
Signed-off-by: Sami Korhonen <skorhone@gmail.com>
StateHijacked is a terminal state. If hijacked connection
is registered as an active connection, connection will
never be unregistered. This causes two issues
First issue is that active connection counters are off.
Second issue is a resource leak caused by connection
object that is stored to a map.
After this patch hijacked connections are no longer
visible in counters. If a counter for hijacked
connections is required, podman must track
connections returned by Hijacker.Hijack()
It might make sense to develop abstraction layer for
hijacking - and move all hijacking related code to a
separate package. Hijacking code is prone to resource
leaks and it should be thoroughly tested.
Signed-off-by: Sami Korhonen <skorhone@gmail.com>
We are using these dependencies just to get the device from path.
These dependencies no longer build on Windows, so simply cloning
the deviceFromPath function, we can eliminate the need for this
vendoring.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a `context.Context` to the log APIs to allow for cancelling
streaming (e.g., via `podman logs -f`). This fixes issues for
the remote API where some go routines of the server will continue
writing and produce nothing but heat and waste CPU cycles.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
If I enter a continer with --userns keep-id, my UID will be present
inside of the container, but most likely my user will not be defined.
This patch will take information about the user and stick it into the
container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Docker api version 1.24 uses a query parameter named Filter
for filtering images by names. In more recent versions of
api name filter is in filters query parameter with other
filters
This patch adds a mapping that translates Filter query
parameter to Filters={"reference": [""]}
Signed-off-by: Sami Korhonen <skorhone@gmail.com>
--sdnotify container|conmon|ignore
With "conmon", we send the MAINPID, and clear the NOTIFY_SOCKET so the OCI
runtime doesn't pass it into the container. We also advertise "ready" when the
OCI runtime finishes to advertise the service as ready.
With "container", we send the MAINPID, and leave the NOTIFY_SOCKET so the OCI
runtime passes it into the container for initialization, and let the container advertise further metadata.
This is the default, which is closest to the behavior podman has done in the past.
The "ignore" option removes NOTIFY_SOCKET from the environment, so neither podman nor
any child processes will talk to systemd.
This removes the need for hardcoded CID and PID files in the command line, and
the PIDFile directive, as the pid is advertised directly through sd-notify.
Signed-off-by: Joseph Gooch <mrwizard@dok.org>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
--tz flag sets timezone inside container
Can be set to IANA timezone as well as `local` to match host machine
Signed-off-by: Ashley Cui <acui@redhat.com>
The infra/abi code for pods was written in a flawed way, assuming
that the map[string]error containing individual container errors
was only set when the global error for the pod function was nil;
that is not accurate, and we are actually *guaranteed* to set the
global error when any individual container errors. Thus, we'd
never actually include individual container errors, because the
infra code assumed that err being set meant everything failed and
no container operations were attempted.
We were originally setting the cause of the error to something
nonsensical ("container already exists"), so I made a new error
indicating that some containers in the pod failed. We can then
ignore that error when building the report on the pod operation
and actually return errors from individual containers.
Unfortunately, this exposed another weakness of the infra code,
which was discarding the container IDs. Errors from individual
containers are not guaranteed to identify which container they
came from, hence the use of map[string]error in the Pod API
functions. Rather than restructuring the structs we return from
pkg/infra, I just wrapped the returned errors with a message
including the ID of the container.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We weren't actually halting the goroutine that sent events, so it
would continue sending even when the channel closed (the most
notable cause being early hangup - e.g. Control-c on a curl
session). Use a context to cancel the events goroutine and stop
sending events.
Fixes#6805
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
In response to input regarding the semantic difference for the `force`
parameter for volume removal between Docker and us, this change ensures
that we emulate the Dockr behaviour correctly when this parameter is
specified.
Signed-off-by: Matt Brindley <58414429+maybe-sybr@users.noreply.github.com>
This change implements docker compatibile endpoint for interacting with
volumes. The code is mostly lifted from the `libpod` API handlers but
decodes and constructs data using types defined in the docker API
package.
Some notable support caveats with the current implementation:
* we don't return the nullable `Status` or `UsageData` keys when
returning volume information for inspect and create endpoints
* we don't support filters when pruning
* we return a fixed `0` for the `SpaceReclaimed` key when pruning
since we have no insight into how much space was freed from runtime
Signed-off-by: Matt Brindley <58414429+maybe-sybr@users.noreply.github.com>
In the API, we are currently returning the image time of creation
as a string, in time.Time format. The API is for a 64 bit integer
representing Unix time.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
