This patch adds a new endpoint to the REST API called "artifacts" with
the following methods:
- Add
- Extract
- Inspect
- List
- Pull
- Push
- Remove
This API will be utilised by the Podman bindings to add OCI Artifact
support to our remote clients.
Jira: https://issues.redhat.com/browse/RUN-2711
Signed-off-by: Lewis Roy <lewis@redhat.com>
Netavark v1.15 added new warnings on some invalid names and that
triggerd a new test failure in podman e2e test.
The "Podman kube play with disabled cgroup" case now complains about an
empty name:
podman [options] kube play /tmp/CI_aM20/podman-e2e-3156601197/subtest-3441376193/p/kube.yaml
[WARN netavark::network::bridge] invalid network alias "": name is empty, ignoring this name
This is because this test does not set a container name thus the code
was adding an empty string so to fix it check if the name is not empty
first.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The conditions are always true so they can be removed. And in the case
of exportCheckpoint() the scope means addToTarFiles was overwritten and
thus when it looped over it later the slice was always empty.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Instead of catching all signals and then ignoring them inside the loop
again just don't register them in Notify() to begin with.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add `--swap` argument to `podman machine init` command.
Passing an int64 value to this flag will trigger the Podman machine
ignition file to be generated with a zram-generator.conf file containing
the --swap value as the zram-size argument.
This file is read by the zram-generator systemd service on boot
resulting in a zram swap device being created.
Fixes: https://github.com/containers/podman/issues/15980
Signed-off-by: Lewis Roy <lewis@redhat.com>
The Docker `-XDELETE image/$name?force=true` endpoint only removes
containers using an image if they are in a non running state.
In Podman, when forcefully removing images we also forcefully delete
containers using the image including running containers.
This patch changes the Docker image force delete compat API to act like the
Docker API while maintaining commands like `podman rmi -f $imagename`
It also corrects the API return code returned when an image is requested
to be deleted with running containers using it.
Fixes: https://github.com/containers/podman/issues/25871
Signed-off-by: Lewis Roy <lewis@redhat.com>
Like podman run --rm, start --attach must also ensure the contianer is
removed before it exist. Otherwise there is a race where the container
still exist after the command exits, because removal would only happen
by the cleanup process in the background.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This looks like debug leftover, in any case this is not an error so
simply remove the line.
Fixes#25965
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
in #25884, it was pointed out that the standard detection used to
determine the artifact's file type can be wrong. in those cases, it
would be handy for the user to be able to override the media type of the
layer. as such, added a new option called `--file-type`, which is
optional, and allows users to do just that.
`podman artifact add --file-type text/yaml
quay.io/artifact/config:latest ./config.yaml `
Fixes: #25884
Signed-off-by: Brent Baude <bbaude@redhat.com>
This commit removes the code to build a local pause
image from the Containerfile. It is replaced with
code to find the catatonit binary and include it in
the Rootfs.
This removes the need to build a local pause container
image.
The same logic is also applied to createServiceContainer
which is originally also based on the pause image.
Fixes: #23292
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This `--config` option was initially added here:
4e4c3e3dbf
Under the hood this simply modifies env to set DOCKER_CONFIG=<passed
in string>
The DOCKER_CONFIG env var is used as a directory that contains
multiple config files... of which podman and container libs probably
only use `$DIR/config.json`.
See: https://docs.docker.com/reference/cli/docker/#environment-variables
The old CMD and help text was misleading... if we point the at a
regular file we can see errors like:
```
$ touch /tmp/foo/tmpcr9zrx71
$ /bin/podman --config /tmp/foo/tmpcr9zrx71 build -t foobar:latest
Error: creating build container: initializing source docker://quay.io/centos/centos:stream9: getting username and password: reading JSON file "/tmp/foo/tmpcr9zrx71/config.json": open /tmp/foo/tmpcr9zrx71/config.json: not a directory
```
^^ In this case we had created `/tmp/foo/tmpcr9zrx71` as a regular file.
Signed-off-by: Ian Page Hands <iphands@gmail.com>
Since commit 945aade38b we do tear down the kube units if all pods
failed to start. This however broke the use case of an empty pod as we
did not consider that being starting successfully which is wrong and
caused a regression for at least one user.
To fix this special case the empty pod and consider that running.
Fixes: #25786
Fixes: 945aade38b ("quadlet kube: correctly mark unit as failed")
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
No change in functionality.
I might be missing something here, but it appears to be unfinished and
unused.
Fixes: bbd085ad1e ("Podman Pod Create --cpus and --cpuset-cpus flags")
Fixes: 2d86051893 ("Pod Device-Read-BPS support")
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This was added by commit 84e42877a ("make lint: re-enable revive"),
making nolintlint became almost useless.
Remove the ungodly amount of unused nolint annotations.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This commit adds new --cdi-spec-dir global option. This
option is used to add additional CDI spec paths.
Signed-off-by: Micah Chambers (eos) <mchambers@anduril.com>
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
The --env is used to add new environment variable to container or
override the existing one. The --unsetenv is used to remove
the environment variable.
It is done by sharing "env" and "unsetenv" flags between both
"update" and "create" commands and later handling these flags
in the "update" command handler.
The list of environment variables to add/remove is stored
in newly added variables in the ContainerUpdateOptions.
The Container.Update API call is refactored to take
the ContainerUpdateOptions as an input to limit the number of its
arguments.
The Env and UnsetEnv lists are later handled using the envLib
package and the Container is updated.
The remote API is also extended to handle Env and EnvUnset.
Fixes: #24875
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Will safe a few memory copies, we must do that only after namesOrDigests
was populated so the len() does not report zero.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Instead of duplicating the NewArtifactStore() call in many places and
having to make sure we always pass the same path to it define it as
function on the runtime. This allows any caller with access to the
libpod runtime to create the store easily.
This is suing a sync.OnceValues() function so the store is initialized
only once and only when actually needed.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The main point of this is so that I can share the same lookup logic
between Extract() and then the new blob path API I add next.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
A lot of types are moved and now deprecated which causes lint issues.
IDResponse is copied into podman because that has no new 1 to 1
replacement. For some fields that we set as part of the docker API I
added the nolint directive as these fields might be used by API
consumers.
For the other types it is mostly a 1 to 1 move.
ParseUintList is deprecated but we can use the same function from
github.com/containers/storage/pkg/parsers instead.
Note that it containers breaking changes to pkg/bindings which we should
not do generally but given the prevoius commit already has a unavoidable
breaking change we might as well fix the IDResponse issue once now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When no containers could be started we need to make sure the unit status
reflects this. This means we should not send the READ=1 message and not
keep the service container running when we were unable to start any
container.
There is the question what should happen when only a subset was started.
For systemd we can only be either running or failed. And as podman kube
play also just keeps the partial started pods running I opted to let
systemd keep considering this as success.
Fixes#20667
Fixes https://issues.redhat.com/browse/RHEL-80471
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The first condition is checking an error where no error is returned and
the second is checking even though err == nil was matched above already
so we know the error is not nil here.
Then also replace os.IsNotExist(err) with errors.Is(err, os.ErrNotExist)
as that should be used for new code.
This should not change behavior in any way.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It is very bad practise to print to stdout in our backend code without
nay real context. The exact same error message is returned to the caller
and printed in the cli frontend hwere it should be.
Therefore drop this print as it is redundant.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
... to validate that the manifests match expected digests, if any.
Do this everywhere, even where we read local storage which is
mostly trusted, because it is cheap enough and being consistent
makes it less likely for the code to be copied into other
contexts shere the sources are not trusted.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
This commit adds the "secret" Event type and emits
"create" and "remove" events for this Event type
when Secret is created or removed.
This can be used for example by podman interfaces to
view and manage secrets.
Fixes: #24030
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
