When using --pid=host don't try to cover /proc paths, as they are
coming from the /proc bind mounted from the host.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
when defining containers, we missed the conditional logic to allow
the container to be defined with "WithPod" and so forth. I had to
slightly modify the createcontainer process to pass a libpod.Pod
that could override things; use nil as no pod.
Signed-off-by: baude <bbaude@redhat.com>
the rootless container storage is always mounted in a different mount
namespace, owned by the unprivileged user. Even if it is mounted, a
process running in another namespace cannot reuse the already mounted
storage.
Make sure the storage is always cleaned up once the container
terminates.
This has worked with vfs since there is no real mounted storage.
Closes: https://github.com/containers/libpod/issues/2112
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Apply the default AppArmor profile at container initialization to cover
all possible code paths (i.e., podman-{start,run}) before executing the
runtime. This allows moving most of the logic into pkg/apparmor.
Also make the loading and application of the default AppArmor profile
versio-indepenent by checking for the `libpod-default-` prefix and
over-writing the profile in the run-time spec if needed.
The intitial run-time spec of the container differs a bit from the
applied one when having started the container, which results in
displaying a potentially outdated AppArmor profile when inspecting
a container. To fix that, load the container config from the file
system if present and use it to display the data.
Fixes: #2107
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Updating the vendor or runc to pull in some fixes that we need.
In order to get this vendor to work, we needed to update the vendor
of docker/docker, which causes all sorts of issues, just to fix
the docker/pkg/sysinfo. Rather then doing this, I pulled in pkg/sysinfo
into libpod and fixed the code locally.
I then switched the use of docker/pkg/sysinfo to libpod/pkg/sysinfo.
I also switched out the docker/pkg/mount to containers/storage/pkg/mount
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add support for executing an init binary as PID 1 in a container to
forward signals and reap processes. When the `--init` flag is set for
podman-create or podman-run, the init binary is bind-mounted to
`/dev/init` in the container and "/dev/init --" is prepended to the
container's command.
The default base path of the container-init binary is `/usr/libexec/podman`
while the default binary is catatonit [1]. This default can be changed
permanently via the `init_path` field in the `libpod.conf` configuration
file (which is recommended for packaging) or temporarily via the
`--init-path` flag of podman-create and podman-run.
[1] https://github.com/openSUSE/catatonitFixes: #1670
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We had two problems with /dev/shm, first, you mount the
container read/only then /dev/shm was mounted read/only.
This is a bug a tmpfs directory should be read/write within
a read-only container.
The second problem is we were ignoring users mounted /dev/shm
from the host.
If user specified
podman run -d -v /dev/shm:/dev/shm ...
We were dropping this mount and still using the internal mount.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Podman will search through the directory and will add any device
nodes that it finds. If no devices are found we return an error.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when a user specifies --pod to podman create|run, we should create that pod
automatically. the port bindings from the container are then inherited by
the infra container. this signicantly improves the workflow of running
containers inside pods with podman. the user is still encouraged to use
podman pod create to have more granular control of the pod create options.
Signed-off-by: baude <bbaude@redhat.com>
we need to allow users to expose ports to the host for the purposes
of networking, like a webserver. the port exposure must be done at
the time the pod is created.
strictly speaking, the port exposure occurs on the infra container.
Signed-off-by: baude <bbaude@redhat.com>
We are still requiring oci-systemd-hook to be installed in order to run
systemd within a container. This patch properly mounts
/sys/fs/cgroup/systemd/libpod_parent/libpod-UUID on /sys/fs/cgroup/systemd inside of container.
Since we need the UUID of the container, we needed to move Systemd to be a config option of the
container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
As of now, there is no way to debug podman clean up processes.
They are started by conmon with no stdout/stderr and log nowhere.
This allows us to actually figure out what is going on when a
cleanup process runs.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Add the --ip flag back with bash completions. Manpages still
missing.
Add plumbing to pass appropriate the appropriate option down to
libpod to connect the flag to backend logic added in the previous
commits.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Also update some missing fields libpod.conf obtions in man pages.
Fix sort order of security options and add a note about disabling
labeling.
When a process requests a new label. libpod needs to reserve all
labels to make sure that their are no conflicts.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1406
Approved by: mheon
Firstly, when adding the privileged catch-all resource device,
first remove the spec's default catch-all resource device.
Second, remove our default rootfs propogation config - Docker
does not set this by default, so I don't think we should either.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1491
Approved by: TomSweeneyRedHat
This matches Docker behavior more closely and should resolve an
issue we were seeing with /sys mounts
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1465
Approved by: rhatdan
This is an incomplete fix, as it would be best for the libpod library to be in charge of coordinating the container's dependencies on the infra container. A TODO was left as such. UTS is a special case, because the docker library that namespace handling is based off of doesn't recognize a UTS based on another container as valid, despite the library being able to handle it correctly. Thus, it is left in the old way.
Signed-off-by: haircommander <pehunt@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1347
Approved by: mheon
We should be sharing cgroups namespace by default in pods
uts namespace sharing was broken in pods.
Create a new libpod/pkg/namespaces for handling of namespace fields
in containers
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1418
Approved by: mheon
When there was a conflict between a user-added volume and a mount
already in the spec, we previously respected the mount already in
the spec and discarded the user-added mount. This is counter to
expected behavior - if I volume-mount /dev into the container, I
epxect it will override the default /dev in the container, and
not be ignored.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1419
Approved by: TomSweeneyRedHat
When user-specified volume mounts overlap with mounts already in
the spec, remove the mount in the spec to ensure there are no
conflicts.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1419
Approved by: TomSweeneyRedHat
Fix the test for checking when /sys must be bind mounted from the
host. It should be done only when userNS are enabled (the
!UsernsMode.IsHost() check is not enough for that).
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1349
Approved by: rhatdan
Also it fix the issue of exposing both tc/udp port even if
only one proto specified.
Signed-off-by: Kunal Kushwaha <kushwaha_kunal_v7@lab.ntt.co.jp>
Closes: #1325
Approved by: mheon
As well as small style corrections, update pod_top_test to use CreatePod, and move handling of adding a container to the pod's namespace from container_internal_linux to libpod/option.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
