command.Start() just starts the command. That catches some
errors, but the nasty ones - bad options and similar - happen
when the command runs. Use CombinedOutput() instead - it waits
for the command to exit, and thus catches non-0 exit of the
`mount` command (invalid options, for example).
STDERR from the `mount` command is directly used, which isn't
necessarily the best, but we can't really get much more info on
what went wrong.
Fixes#4303
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
always create a new cgroup for conmon also when running as rootless.
We were previously creating one only when necessary, but that behaves
differently than root containers.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Currently podman play kube is not using the system default seccomp.json file.
This PR will use the default or override location for podman play.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Generate an image's RepoDigests list using all applicable digests, and
refrain from outputting a digest in the tag column of the "images"
output.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Be prepared to report multiple image digests for images which contain
multiple manifests but, because they continue to have the same set of
layers and the same configuration, are considered to be the same image.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Add --override-arch and --override-os as hidden flags, in line with the
global flag names that skopeo uses, so that we can test behavior around
manifest lists without having to conditionalize more of it by arch.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
When an image can be opened as an ImageSource but not an Image, handle
the case where it's an image list all by itself, the case where it's an
image for a different architecture/OS combination, or the case where
it's both.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Move to containers/image v5 and containers/buildah to v1.11.4.
Replace an equality check with a type assertion when checking for a
docker.ErrUnauthorizedForCredentials in `podman login`.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
We have a lot of checks for container state scattered throughout
libpod. Many of these need to ensure the container is in one of a
given set of states so an operation may safely proceed.
Previously there was no set way of doing this, so we'd use unique
boolean logic for each one. Introduce a helper to standardize
state checks.
Note that this is only intended to replace checks for multiple
states. A simple check for one state (ContainerStateRunning, for
example) should remain a straight equality, and not use this new
helper.
Signed-off-by: Matthew Heon <mheon@redhat.com>
when running in systemd mode on cgroups v1, make sure the
/sys/fs/cgroup/systemd/release_agent is masked otherwise the container
is able to modify it and execute scripts on the host.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When you try and create a new volume with the name of a volume
that already exists, you presently get a thoroughly unhelpful
error from `mkdir` as the volume attempts to create the
directory it will be mounted at. An EEXIST out of mkdir is not
particularly helpful to Podman users - it doesn't explain that
the name is already taken by another volume.
The solution here is potentially racy as the runtime is not
locked, so someone else could take the name while we're still
getting things set up, but that's a narrow timing window, and we
will still return an error - just an error that's not as good as
this one.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
if the cgroup manager is set to systemd, detect if dbus is available,
otherwise fallback to --cgroup-manager=cgroupfs.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Everything else is a flag to mount, but "uid" and "gid" are not.
We need to parse them out of "o" and handle them separately.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Previously, when `podman run` encountered a volume mount without
separate source and destination (e.g. `-v /run`) we would assume
that both were the same - a bind mount of `/run` on the host to
`/run` in the container. However, this does not match Docker's
behavior - in Docker, this makes an anonymous named volume that
will be mounted at `/run`.
We already have (more limited) support for these anonymous
volumes in the form of image volumes. Extend this support to
allow it to be used with user-created volumes coming in from the
`-v` flag.
This change also affects how named volumes created by the
container but given names are treated by `podman run --rm` and
`podman rm -v`. Previously, they would be removed with the
container in these cases, but this did not match Docker's
behaviour. Docker only removed anonymous volumes. With this patch
we move to that model as well; `podman run -v testvol:/test` will
not have `testvol` survive the container being removed by `podman
rm -v`.
The sum total of these changes let us turn on volume removal in
`--rm` by default.
Fixes: #4276
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When a container is created with a given OCI runtime, but then it
is uninstalled or removed from the configuration file, Libpod
presently reacts very poorly. The EvictContainer code can
potentially remove these containers, but we still can't see them
in `podman ps` (aside from the massive logrus.Errorf messages
they create).
Providing a minimal OCI runtime implementation for missing
runtimes allows us to behave better. We'll be able to retrieve
containers from the database, though we still pop up an error for
each missing runtime. For containers which are stopped, we can
remove them as normal.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
network statistics cannot be collected for rootless network devices with
the current implementation. for now, we return nil so that stats will
at least for users.
Fixes:#4268
Signed-off-by: baude <bbaude@redhat.com>
The json field is called `Image` while the go field is called `ImageID`,
tricking users into filtering for `Image` which ultimately results in an
error. Hence, rename the field to `Image` to align json and go.
To prevent podman users from regressing, rename `Image` to `ImageID` in
the specified filters. Add tests to prevent us from regressing. Note
that consumers of the go API that are using `ImageID` are regressing;
ultimately we consider it to be a bug fix.
Fixes: #4193
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Also, ensure that we don't try to mount them without root - it
appears that it can somehow not error and report that mount was
successful when it clearly did not succeed, which can induce this
case.
We reuse the `--force` flag to indicate that a volume should be
removed even after unmount errors. It seems fairly natural to
expect that --force will remove a volume that is otherwise
presenting problems.
Finally, ignore EINVAL on unmount - if the mount point no longer
exists our job is done.
Fixes: #4247Fixes: #4248
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
In some cases, conmon can fail without writing logs. Change the wording
of the error message from
"error reading container (probably exited) json message"
to
"container create failed (no logs from conmon)"
to have a more helpful error message that is more consistent with other
errors at that stage of execution.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Previously, `podman checkport restore` with exported containers,
when told to create a new container based on the exported
checkpoint, would create a new container, with a new container
ID, but not reset CGroup path - which contained the ID of the
original container.
If this was done multiple times, the result was two containers
with the same cgroup paths. Operations on these containers would
this have a chance of crossing over to affect the other one; the
most notable was `podman rm` once it was changed to use the --all
flag when stopping the container; all processes in the cgroup,
including the ones in the other container, would be stopped.
Reset cgroups on restore to ensure that the path matches the ID
of the container actually being run.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
