* Option left in images/diff.go CLI as comment implies it is needed for
backwards compatibility.
```release-note
NONE
```
[NO NEW TESTS NEEDED]
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Remove the `ConfigDigest` field from `entities.ImageSummary` which has
never been populated (or documented) until now. Unless there is a
specific request or need to support it, remove the TODO that was added
during the libimage migration.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that `podman image mount` prints a pretty table unless there
is only argument passed and without a custom format. Fixing a TODO item
brought me to the specific code location and revealed the fart in the
logic.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Remove duplicate or unused types and constants
* Move all documetation-only models and responses into swagger package
* Remove all unecessary names, go-swagger will determine names from
struct declarations
* Use Libpod suffix to differentiate between compat and libpod models
and responses. Taken from swagger:operation declarations.
* Models and responses that start with lowercase are for swagger use
only while uppercase are used "as is" in the code and swagger comments
* Used gofumpt on new code
```release-note
```
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add the notion of a "service container" to play kube. A service
container is started before the pods in play kube and is (reverse)
linked to them. The service container is stopped/removed *after*
all pods it is associated with are stopped/removed.
In other words, a service container tracks the entire life cycle
of a service started via `podman play kube`. This is required to
enable `play kube` in a systemd unit file.
The service container is only used when the `--service-container`
flag is set on the CLI. This flag has been marked as hidden as it
is not meant to be used outside the context of `play kube`. It is
further not supported on the remote client.
The wiring with systemd will be done in a later commit.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add the notion of an "exit policy" to a pod. This policy controls the
behaviour when the last container of pod exits. Initially, there are
two policies:
- "continue" : the pod continues running. This is the default policy
when creating a pod.
- "stop" : stop the pod when the last container exits. This is the
default behaviour for `play kube`.
In order to implement the deferred stop of a pod, add a worker queue to
the libpod runtime. The queue will pick up work items and in this case
helps resolve dead locks that would otherwise occur if we attempted to
stop a pod during container cleanup.
Note that the default restart policy of `play kube` is "Always". Hence,
in order to really solve #13464, the YAML files must set a custom
restart policy; the tests use "OnFailure".
Fixes: #13464
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
golint, scopelint and interfacer are deprecated. golint is replaced by
revive. This linter is better because it will also check for our error
style: `error strings should not be capitalized or end with punctuation or a newline`
scopelint is replaced by exportloopref (already endabled)
interfacer has no replacement but I do not think this linter is
important.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is an enhancement proposal for the checkpoint / restore feature of
Podman that enables container migration across multiple systems with
standard image distribution infrastructure.
A new option `--create-image <image>` has been added to the
`podman container checkpoint` command. This option tells Podman to
create a container image. This is a standard image with a single layer,
tar archive, that that contains all checkpoint files. This is similar to
the current approach with checkpoint `--export`/`--import`.
This image can be pushed to a container registry and pulled on a
different system. It can also be exported locally with `podman image
save` and inspected with `podman inspect`. Inspecting the image would
display additional information about the host and the versions of
Podman, criu, crun/runc, kernel, etc.
`podman container restore` has also been extended to support image
name or ID as input.
Suggested-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
This reverts commit e133a06d2f.
@nalind found a proper fix in c/storage [1] to address the performance
issue. So we really don't need the flag anymore. Note the flag has
never made it into any release.
[1] d76b3606fc
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add a --size option to podman images to allow for disabling computing
the size of listed images. If listing images is critical to
performance, user may chose to turn off size computation to speed things
up.
Context: #13755
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The PlayKube and PlayKubeDown commands accepted a "path" argument to a YAML file
to play. This requires the caller to write the YAML to a file path. The downside
of this is apparent in the HTTP handlers which have to use a temporary file on
disk to store the YAML file.
The file is opened & used as the body of the HTTP request. It's possible to
instead pass a io.Reader and use a fully in-memory request body.
Add backwards-compatible changes to bindings to allow passing either a filepath
or a io.Reader body.
Refactor the podman bindings to use a io.Reader instead of a filepath.
Simplify the HTTP handlers for PlayKube by removing the now unneeded tempfile.
[NO NEW TESTS NEEDED]
Signed-off-by: Christian Stewart <christian@paral.in>
Allows users to set `--os` , `--arch` and `--variant` of the image
created from the custom import.
Following is useful when user is already aware of the values which are
correct for their generated rootfs
Signed-off-by: Aditya R <arajan@redhat.com>
Add an `--ignore` flag to `podman image rm` to instruct ignoring image
if a specified image does not exist and to not throw an error. Other
commands (e.g., `podman container rm`) already support this flag.
Such an `--ignore` flag can come in handy in clean-up scripcts such as
the teardown phases in the Podman tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Allow users to add annotions in the podman play kube command.
This PR Also fixes the fact that annotations in the pod spec were
not being passed down to containers.
Fixes: https://github.com/containers/podman/issues/12968
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This option was requested so that users could specify alternate
locations to find context directories for each image build. It
requites the --build option to be set.
Partion Fix: https://github.com/containers/podman/issues/12485
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow users to commit containers into a single layer.
Usage
```bash
podman container commit --squash <name>
```
Signed-off-by: Aditya R <arajan@redhat.com>
`podman play kube` tries to build images even if `--build` is set to
false so lets honor that and make `--build` , `true` by default so it
matches the original behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves#10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
podman network create --subnet, --gateway and --ip-range can now be
specified multiple times to join the network to more than one subnet.
This is very useful if you want to use a dual stack network and assign a
fixed ipv4 and ipv6 subnet. The order of the options is important here,
the first --gateway/--ip-range will be assigned to the first subnet and
so on.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This commit includes:
* Handlers for generate systemd unit
with manually defined dependencies such as:
Wants=, After= and Requires=
* The new unit and e2e tests for checking generated systemd units
for container and pod with custom dependencies
* Documented descriptions for custom dependencies options
Signed-off-by: Eugene (Evgenii) Shubin <esendjer@gmail.com>
* Update method/function signatures use the manifest list name and
images associated with the operation explicitly, in general
func f(ctx context.Context, manifestListName string,
ImageNames []string, options *fOptions)
* Leverage gorilla/mux Subrouters to support API v3.x and v4.x for
manifests
* Make manifest API endpoints more RESTful
* Add PUT /manifest/{id} to update existing manifests
* Add manifests.Annotate to go bindings, uncommented unit test
* Add DELETE /manifest/{Id} to remove existing manifest list, use
PUT /manifest/{id} to remove images from a list
* Deprecated POST /manifest/{id}/add and /manifest/{id}/remove, use
PUT /manifest/{id} instead
* Corrected swagger godoc and updated to cover API changes
* Update podman manifest commands to use registry.Context()
* Expose utils.GetVar() to obtain query parameters by name
* Unexpose server.registerSwaggerHandlers, not sure why this was ever
exposed.
* Refactored code to use http.Header instead of map[string]string when
operating on HTTP headers.
* Add API-Version header support in bindings to allow calling explicate
versions of the API. Header is _NOT_ forwarded to the API service.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
added support for pod wide sysctls. The sysctls supported are the same as the continer run controls.
These controls are only valid if the proper namespaces are shared within the pod, otherwise only the infra ctr gets the sysctl
resolves#12747
Signed-off-by: cdoern <cdoern@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
e.TimeNano contains nanoseconds since epoch, not just the nanoseconds
after e.Time.
time.Unix supports nanoseconds > 999999999 and converts them to seconds,
so just passing e.TimeNano is enough.
Signed-off-by: Leah Neukirchen <leah@vuxu.org>
