for podman pod create, when we are not sharing any namespaces there is no point for the infra container.
This is especially true since resources have also been decoupled from the container recently.
handle this on the cmd level so that we can still create infra if set explicitly
resolves#15048
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Most network commands/features work with both netavark and CNI. When
we added added netavark most docs were not vetted and thus still use CNI
network, it should just say network.
Fixes#14990
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
added the following flags and handling for podman pod create
--memory-swap
--cpuset-mems
--device-read-bps
--device-write-bps
--blkio-weight
--blkio-weight-device
--cpu-shares
given the new backend for systemd in c/common, all of these can now be exposed to pod create.
most of the heavy lifting (nearly all) is done within c/common. However, some rewiring needed to be done here
as well!
Signed-off-by: Charlie Doern <cdoern@redhat.com>
The same problem again as 4374038cc6.
Also fix the incorrect --format autocompletion struct.
It should be avoided to import cmd/podman/... packages from outside of
cmd/podman. This can lead in weird hard to debug import paths but also
can have negative consequences when imported in unit tests. In this case
it will set XDG_CONFIG_HOME and thus the machine tests this dir over the
tmp HOME env variable which is set at a later point. This caused machine
files to be leaked into the actual users home dir.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
--latest : pause/unpause the latest container.
--filter : pause/unpause the filtered container.
--cidfile : Read container ID from the specified file and pause/unpause the container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
When we pause `rootless cgroups v1 container`, podman returns error from `libpod.(*Container).pause`.
Podman does not need to return error from `containers.pause` because of duplicate.
[NO NEW TESTS NEEDED]
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Docker supports -H and --host for specify the listening socket. Podman
should support them also in order to match the CLI.
These will not be documented since Podman defaults to using the
--url option.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Filter flag is added for podman stop and podman --remote stop. Filtering logic is implemented in
getContainersAndInputByContext(). Start filtering can be manipulated to use this logic as well to limit redundancy.
Signed-off-by: Karthik Elango <kelango@redhat.com>
I added the shorthand option for `podman pull --all-tags`. Like Docker,
Podman can now do `podman pull -a`.
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
The "podman kube play" command is designed to be a replacement for the
"podman play kube" command.
It performs the same function as "play kube" while also still working with the same flags and options.
The "podman play kube" command is still functional as an alias of "kube play".
Closes#12475
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that the docs for pull policies is consistent with Buildah and
reflects the implementation.
Further improve the help messages and auto completions.
[NO NEW TESTS NEEDED]
Fixes: #14846
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Podman wait should not be defaulting to just stopped. By default
wait API waits for stopped and exited. We should not override this on
the client side.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Refactored the networkPrune function to improve readability.
This commit changes the `networkPrune` function to
use the `PrintNetworkPruneResults` function.
[NO NEW TESTS NEEDED]
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
It should be avoided to import cmd/podman/... packages from outside of
cmd/podman. This can lead in weird hard to debug import paths but also
can have negative consequences when imported in unit tests. In this case
it will set XDG_CONFIG_HOME and thus the machine tests this dir over the
tmp HOME env variable which is set at a later point. This caused machine
files to be leaked into the actual users home dir.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Update the podman pod unpause to only show the paused
containers with autocomplete.
Fix a typo in the help command.
Update the unpause function to only attempt an unpause
on pasued pods instead of all the pods.
Update the tests accordingly.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
add support for the --uts flag in pod create, allowing users to avoid
issues with default values in containers.conf.
uts follows the same format as other namespace flags:
--uts=private (default), --uts=host, --uts=ns:PATH
resolves#13714
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Previously, `podman system df --format "{{json .}}"` would not output
`Size` and `Reclaimable` like `podman system df` would.
```
{"Type":"Images","Total":5,"Active":0,"Size":39972240,"Reclaimable":39972240}
{"Type":"Containers","Total":0,"Active":0,"Size":0,"Reclaimable":0}
{"Type":"Local Volumes","Total":0,"Active":0,"Size":0,"Reclaimable":0}
```
Closes: #14769
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Following PR adds support for running containers from a manifest list
present on localstorage. Before this PR podman only supports running
containers from valid images but not from manifest list.
So `podman run -it --platform <some> <manifest-list> command` should
become functional now and users should be able to resolve images on the
bases of provided `--platform` string.
Example
```
podman manifest create test
podman build --platform linux/amd64,linux/arm64 --manifest test .
podman run --rm --platform linux/arm64/v8 test uname -a
```
Closes: https://github.com/containers/podman/issues/14773
Signed-off-by: Aditya R <arajan@redhat.com>
using the new resource backend, implement podman pod create --memory which enables
users to modify memory.max inside of the parent cgroup (the pod), implicitly impacting all
children unless overriden
Signed-off-by: Charlie Doern <cdoern@redhat.com>
at startup, when running on a cgroup v2 system, check if the current
process is running in the root cgroup and move it to a sub-cgroup,
otherwise Podman is not able to create cgroups and move processes
there.
Closes: https://github.com/containers/podman/issues/14573
[NO NEW TESTS NEEDED] it needs nested podman
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
Podman Machine crashes if run as root. When creating the machine, we write the ignition so that the UID of the core user matches the UID of the user on the host. We by default, create the root user on the machine with UID 0. If the user on the host is root, the core UID and the Root UID collide, causing a the VM not to boot.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
cfg.RuntimePath was set to default runtime, so the empty string
check fails. Instead we could check if the flag was changed.
Signed-off-by: Zeyad Yasser <zeyady98@gmail.com>
add support for podman-remote image scp as well as direct access via the API. This entailed
a full rework of the layering of image scp functions as well as the usual API plugging and type creation
also, implemented podman image scp tagging. which makes the syntax much more readable and allows users t tag the new image
they are loading to the local/remote machine:
allow users to pass a "new name" for the image they are transferring
`podman tag` as implemented creates a new image im `image list` when tagging, so this does the same
meaning that when transferring images with tags, podman on the remote machine/user will load two images
ex: `podman image scp computer1::alpine computer2::foobar` creates alpine:latest and localhost/foobar on the remote host
implementing tags means removal of the flexible syntax. In the currently released podman image scp, the user can either specify
`podman image scp source::img dest::` or `podman image scp dest:: source::img`. However, with tags this task becomes really hard to check
which is the image (src) and which is the new tag (dst). Removal of that streamlines the arg parsing process
Signed-off-by: Charlie Doern <cdoern@redhat.com>
